SAE J512 Inverted
For SAE J512 Inverted, governing standard is SAE J512; region of origin is American Connections; thread type (tapered or parallel) is straight thread; seat or flare angle is 45° flare; seal method is The male connector is either a 45° flare within the tube fitting or a 42° seat in the machined adapter. The female incorporates a straight thread with a 42° inverted flare. The fittings are sealed at the flared surfaces, recorded from its source on 2026-08-13.
- Connection type
- SAE J512 Inverted verified
- Governing standard
- SAE J512 verified
- Region of origin
- American Connections our reading
- Thread type (tapered or parallel)
- straight thread verified
- Seat or flare angle
- 45° flare verified
- Seal method
- The male connector is either a 45° flare within the tube fitting or a 42° seat in the machined adapter. The female incorporates a straight thread with a 42° inverted flare. The fittings are sealed at the flared surfaces. verified
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
What the source says
SAE J512 inverted connections are typically used in automotive systems. The male connector is either a 45° flare within the tube fitting or a 42° seat in the machined adapter. The female incorporates a straight thread with a 42° inverted flare. The fittings are sealed at the flared surfaces. These threads also maintain a mechanical connection.
— brennaninc.com, retrieved 2026-08-13
Source
- brennaninc.comhttps://brennaninc.com/connection-types/