965
For 965, fastener description is Cross recessed countersunk (flat) head screws (Countersunk heads according to ISO); iso equivalent is 7046-1; interchangeability is Nominal size changed; head dimension changed; thread length changed; strength 8.8 included (see Part 2); penetration depth of cross slots changed; modification notes is Nominal size changed; head dimension changed; thread length changed; strength 8.8 included (see Part 2); penetration depth of cross slots changed, verified against its source on 2026-08-12.
- DIN standard
- 965 verified
- Fastener description
- Cross recessed countersunk (flat) head screws (Countersunk heads according to ISO) verified
- ISO equivalent
- 7046-1 verified
- Interchangeability
- Nominal size changed; head dimension changed; thread length changed; strength 8.8 included (see Part 2); penetration depth of cross slots changed verified
- Modification notes
- Nominal size changed; head dimension changed; thread length changed; strength 8.8 included (see Part 2); penetration depth of cross slots changed verified
What the source says
Cross recessed countersunk (flat) head screws (Countersunk heads according to ISO) | 965 | 7046-1 | | 7046 | 7046-1 | 1994-10 | Countersunk flat head screws (common head style) with type H or type Z cross recess – Property class 4.8 | Nominal size changed; head dimension changed; thread length changed; strength 8.8 included (see Part 2); penetration depth of cross slots changed |
— fullerfasteners.com, retrieved 2026-08-12
Sources disagree
More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.
Fastener description
fullerfasteners.com says fastener description is Cross recessed countersunk (flat) head screws (Countersunk heads according to ISO), as of 2026-08-12.
Cross recessed countersunk (flat) head screws (Countersunk heads according to ISO) | 965 | 7046-1 | | 7046 | 7046-1 | 1994-10 | Countersunk flat head screws (common head style) with type H or type Z cross recess – Property class 4.8 | Nominal size changed; head dimension changed; thread length changed; strength 8.8 included (see Part 2); penetration depth of cross slots changed |
https://fullerfasteners.com/tech/din-iso-en-crossover-chart/
monsterbolts.com says fastener description is Head/countersink geometry., as of 2026-08-12.
DIN 965 | ISO 7046 | Check spec
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
trfastenings.com says fastener description is Cross Recessed Countersunk Flat Head Screws, as of 2026-08-12.
DIN 965 | ISO 7046 | BS3692 | Cross Recessed Countersunk Flat Head Screws |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
ISO equivalent
fullerfasteners.com says iso equivalent is 7046-1, as of 2026-08-12.
Cross recessed countersunk (flat) head screws (Countersunk heads according to ISO) | 965 | 7046-1 | | 7046 | 7046-1 | 1994-10 | Countersunk flat head screws (common head style) with type H or type Z cross recess – Property class 4.8 | Nominal size changed; head dimension changed; thread length changed; strength 8.8 included (see Part 2); penetration depth of cross slots changed |
https://fullerfasteners.com/tech/din-iso-en-crossover-chart/
monsterbolts.com says iso equivalent is 7046, as of 2026-08-12.
DIN 965 | ISO 7046 | Check spec
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
trfastenings.com says iso equivalent is 7046, as of 2026-08-12.
DIN 965 | ISO 7046 | BS3692 | Cross Recessed Countersunk Flat Head Screws |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Interchangeability
fullerfasteners.com says interchangeability is Nominal size changed; head dimension changed; thread length changed; strength 8.8 included (see Part 2); penetration depth of cross slots changed, as of 2026-08-12.
Cross recessed countersunk (flat) head screws (Countersunk heads according to ISO) | 965 | 7046-1 | | 7046 | 7046-1 | 1994-10 | Countersunk flat head screws (common head style) with type H or type Z cross recess – Property class 4.8 | Nominal size changed; head dimension changed; thread length changed; strength 8.8 included (see Part 2); penetration depth of cross slots changed |
https://fullerfasteners.com/tech/din-iso-en-crossover-chart/
monsterbolts.com says interchangeability is Check spec, as of 2026-08-12.
DIN 965 | ISO 7046 | Check spec
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
Sources
- fullerfasteners.comhttps://fullerfasteners.com/tech/din-iso-en-crossover-chart/
- monsterbolts.comhttps://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
- trfastenings.comhttps://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards