DIN 960 — Hexagon bolts, Metric fine thread, Types m and mg — ISO 8765
What is the din standard for DIN 960 — Hexagon bolts, Metric fine thread, Types m and mg — ISO 8765?
For DIN 960, fastener description is Hexagon bolts, Metric fine thread, Types m and mg; iso equivalent is 8765; interchangeability is Nominal size extended; width across flats according to DIN ISO 272 included; modification notes is Nominal size extended; width across flats according to DIN ISO 272 included, verified against its source on 2026-08-12.
Nominal size extended; width across flats according to DIN ISO 272 included | Hexagon bolts, Metric fine thread, Types m and mg | 960 | 8765 |
— fullerfasteners.com, retrieved 2026-08-12
- DIN standard
- 960 verified
- Fastener description
- Hexagon bolts, Metric fine thread, Types m and mg verified
- ISO equivalent
- 8765 verified
- Interchangeability
- Nominal size extended; width across flats according to DIN ISO 272 included verified
- Modification notes
- Nominal size extended; width across flats according to DIN ISO 272 included verified
Sources disagree
More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.
Fastener description
fullerfasteners.com says fastener description is Hexagon bolts, Metric fine thread, Types m and mg, as of 2026-08-12.
Nominal size extended; width across flats according to DIN ISO 272 included | Hexagon bolts, Metric fine thread, Types m and mg | 960 | 8765 |
https://fullerfasteners.com/tech/din-iso-en-crossover-chart/
monsterbolts.com says fastener description is Fine thread PT., as of 2026-08-12.
DIN 960 | ISO 8765 | Fully interchangeable
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
trfastenings.com says fastener description is M8x1 to M100x4 Hexagon Head Bolts with fine pitch thread - product grades A and B, as of 2026-08-12.
DIN 960 | ISO 8765 | | M8x1 to M100x4 Hexagon Head Bolts with fine pitch thread - product grades A and B | DIN 960 | ISO 8676 |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
trfastenings.com says fastener description is M8x1 to M100x4 Hexagon Head Bolts with fine pitch thread - product grades A and B, as of 2026-08-12.
DIN 960 | ISO 8765 | | M8x1 to M100x4 Hexagon Head Bolts with fine pitch thread - product grades A and B |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
ISO equivalent
fullerfasteners.com says iso equivalent is 8765, as of 2026-08-12.
Nominal size extended; width across flats according to DIN ISO 272 included | Hexagon bolts, Metric fine thread, Types m and mg | 960 | 8765 |
https://fullerfasteners.com/tech/din-iso-en-crossover-chart/
monsterbolts.com says iso equivalent is 8765, as of 2026-08-12.
DIN 960 | ISO 8765 | Fully interchangeable
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
trfastenings.com says iso equivalent is 8676, as of 2026-08-12.
DIN 960 | ISO 8765 | | M8x1 to M100x4 Hexagon Head Bolts with fine pitch thread - product grades A and B | DIN 960 | ISO 8676 |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
trfastenings.com says iso equivalent is 8765, as of 2026-08-12.
DIN 960 | ISO 8765 | | M8x1 to M100x4 Hexagon Head Bolts with fine pitch thread - product grades A and B |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Interchangeability
fullerfasteners.com says interchangeability is Nominal size extended; width across flats according to DIN ISO 272 included, as of 2026-08-12.
Nominal size extended; width across flats according to DIN ISO 272 included | Hexagon bolts, Metric fine thread, Types m and mg | 960 | 8765 |
https://fullerfasteners.com/tech/din-iso-en-crossover-chart/
monsterbolts.com says interchangeability is Fully interchangeable, as of 2026-08-12.
DIN 960 | ISO 8765 | Fully interchangeable
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
Sources
- fullerfasteners.comhttps://fullerfasteners.com/tech/din-iso-en-crossover-chart/
- monsterbolts.comhttps://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
- trfastenings.comhttps://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
- trfastenings.comhttps://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards