7985
For 7985, fastener description is Recessed raised cheese (fillister) head screws; iso equivalent is 7045; interchangeability is Nominal size changed; head dimension changed; thread length changed; penetration depth of cross slots changed; modification notes is Nominal size changed; head dimension changed; thread length changed; penetration depth of cross slots changed, verified against its source on 2026-08-12.
- DIN standard
- 7985 verified
- Fastener description
- Recessed raised cheese (fillister) head screws verified
- ISO equivalent
- 7045 verified
- Interchangeability
- Nominal size changed; head dimension changed; thread length changed; penetration depth of cross slots changed verified
- Modification notes
- Nominal size changed; head dimension changed; thread length changed; penetration depth of cross slots changed verified
What the source says
Recessed raised cheese (fillister) head screws | 7985 | 7045 | | | 7045 | 1994-10 | Pan head screws with type H or type Z cross recess – product grade A | Nominal size changed; head dimension changed; thread length changed; penetration depth of cross slots changed |
— fullerfasteners.com, retrieved 2026-08-12
Sources disagree
More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.
Fastener description
fullerfasteners.com says fastener description is Recessed raised cheese (fillister) head screws, as of 2026-08-12.
Recessed raised cheese (fillister) head screws | 7985 | 7045 | | | 7045 | 1994-10 | Pan head screws with type H or type Z cross recess – product grade A | Nominal size changed; head dimension changed; thread length changed; penetration depth of cross slots changed |
https://fullerfasteners.com/tech/din-iso-en-crossover-chart/
monsterbolts.com says fastener description is General-purpose pan head., as of 2026-08-12.
DIN 7985 | ISO 7045 | Fully interchangeable
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
trfastenings.com says fastener description is Cross recessed raised Phillips Pan Head Screws, as of 2026-08-12.
DIN 7985 | ISO 7045 | BS4183 | Cross recessed raised Phillips Pan Head Screws |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Interchangeability
fullerfasteners.com says interchangeability is Nominal size changed; head dimension changed; thread length changed; penetration depth of cross slots changed, as of 2026-08-12.
Recessed raised cheese (fillister) head screws | 7985 | 7045 | | | 7045 | 1994-10 | Pan head screws with type H or type Z cross recess – product grade A | Nominal size changed; head dimension changed; thread length changed; penetration depth of cross slots changed |
https://fullerfasteners.com/tech/din-iso-en-crossover-chart/
monsterbolts.com says interchangeability is Fully interchangeable, as of 2026-08-12.
DIN 7985 | ISO 7045 | Fully interchangeable
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
Sources
- fullerfasteners.comhttps://fullerfasteners.com/tech/din-iso-en-crossover-chart/
- monsterbolts.comhttps://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
- trfastenings.comhttps://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards