DIN 7976 — Slotted set screws with cup point — ISO 1479
What is the din standard for DIN 7976 — Slotted set screws with cup point — ISO 1479?
For DIN 7976, fastener description is Slotted set screws with cup point; iso equivalent is 1479; date of current standard/modified is 1990-08; title of replacement standard is Hexagon head tapping screws; modification notes is disputed: No modifications of dimensions per fullerfasteners.com, Point/thread form variations per monsterbolts.com, verified against its source on 2026-10-12.
Slotted set screws with cup point | 7976 | | | 1479 | 1479 | 1990-08 | Hexagon head tapping screws | No modifications of dimensions |
— fullerfasteners.com, retrieved 2026-09-22
- DIN standard
- 7976 verified
- Fastener description
- Slotted set screws with cup point verified
- ISO equivalent
- 1479 verified
- Date of current standard/modified
- 1990-08 verified
- Title of replacement standard
- Hexagon head tapping screws verified
- Modification notes
- No modifications of dimensions sources disagree
- Interchangeability
- Check spec per monsterbolts.com
Sources disagree
More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.
Modification notes
fullerfasteners.com says modification notes is No modifications of dimensions, as of 2026-09-22.
Slotted set screws with cup point | 7976 | | | 1479 | 1479 | 1990-08 | Hexagon head tapping screws | No modifications of dimensions |
https://fullerfasteners.com/tech/din-iso-en-crossover-chart/
monsterbolts.com says modification notes is Point/thread form variations., as of 2026-09-21.
Hex Head Self-Tapping Screws | DIN 7976 | ISO 1479 | Check spec | Point/thread form variations.
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
Sources
- fullerfasteners.comhttps://fullerfasteners.com/tech/din-iso-en-crossover-chart/
- monsterbolts.comhttps://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners