DIN 7500-1 — Thread rolling screws for ISO metric thread – Part 1: Technical specifications for case hardened and tempered screws — ISO 7085
What is the din standard for DIN 7500-1 — Thread rolling screws for ISO metric thread – Part 1: Technical specifications for case hardened and tempered screws — ISO 7085?
For DIN 7500-1, fastener description is Thread rolling screws for ISO metric thread – Part 1: Technical specifications for case hardened and tempered screws; iso equivalent is 7085; interchangeability is Normative revision, values for case-hardening depth and hole size revised, torque values reduced; modification notes is Normative revision, values for case-hardening depth and hole size revised, torque values reduced, recorded from its source on 2026-08-12.
7500-1 | 7085 | | | | 2009-06 | Thread rolling screws for ISO-metric thread | Normative revision, values for case-hardening depth and hole size revised, torque values reduced |
— fullerfasteners.com, retrieved 2026-08-12
- DIN standard
- 7500-1 verified
- Fastener description
- Thread rolling screws for ISO metric thread – Part 1: Technical specifications for case hardened and tempered screws
- ISO equivalent
- 7085 verified
- Interchangeability
- Normative revision, values for case-hardening depth and hole size revised, torque values reduced verified
- Modification notes
- Normative revision, values for case-hardening depth and hole size revised, torque values reduced verified
Sources disagree
More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.
Fastener description
fullerfasteners.com says fastener description is Thread rolling screws for ISO metric thread – Part 1: Technical specifications for case hardened and tempered screws, as of 2026-08-12.
7500-1 | 7085 | | | | 2009-06 | Thread rolling screws for ISO-metric thread | Normative revision, values for case-hardening depth and hole size revised, torque values reduced |
https://fullerfasteners.com/tech/din-iso-en-crossover-chart/
trfastenings.com says fastener description is Thread rolling Screws for metric ISO thread - Part 1: Types, designation, requirements, as of 2026-08-12.
DIN 7500-1 | ISO 7085 | | Thread rolling Screws for metric ISO thread - Part 1: Types, designation, requirements |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Sources
- fullerfasteners.comhttps://fullerfasteners.com/tech/din-iso-en-crossover-chart/
- trfastenings.comhttps://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards