Reference Source

7337

For 7337, fastener description is Break mandrel Blind Rivets; iso equivalent is 14589, verified against its source on 2026-08-12.

DIN standard
7337 verified
Fastener description
Break mandrel Blind Rivets verified
ISO equivalent
14589 verified
Sourcetrfastenings.com
Verified
Review by
DatasetFastener standard equivalences: DIN to ISO / EN crossover

What the source says

DIN 7337 | ISO 14589 | | Break mandrel Blind Rivets |

— trfastenings.com, retrieved 2026-08-12

Sources disagree

More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.

ISO equivalent

trfastenings.com says iso equivalent is 14589, as of 2026-08-12.

DIN 7337 | ISO 14589 | | Break mandrel Blind Rivets |

https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards

trfastenings.com says iso equivalent is 15977 to ISO 15984, as of 2026-08-12.

DIN 7337 | ISO 14589 | | Break mandrel Blind Rivets | DIN 7337 | ISO 15977 to ISO 15984 |

https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards

trfastenings.com says iso equivalent is 16582 to ISO 16584, as of 2026-08-12.

DIN 7337 | ISO 14589 | | Break mandrel Blind Rivets | DIN 7337 | ISO 15977 to ISO 15984 | | Break mandrel Blind Rivets | DIN 7337 | ISO 16582 to ISO 16584 |

https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards

Source

Last verified against source: . Due for re-check by . This page as Markdown · OKF bundle · full dataset as JSON.