DIN 6927 — Prevailing torque type – All-metal hexagon nuts with flange — ISO 7044
What is the din standard for DIN 6927 — Prevailing torque type – All-metal hexagon nuts with flange — ISO 7044?
For DIN 6927, fastener description is Prevailing torque type – All-metal hexagon nuts with flange; iso equivalent is 7044; en iso number is 1664; interchangeability is Width across flat M10 changed; modification notes is Width across flat M10 changed, verified against its source on 2026-08-12.
6927 | | 1664 | | 7044 | 1998-02 | Prevailing torque type – All-metal hexagon nuts with flange | Width across flat M10 changed |
— fullerfasteners.com, retrieved 2026-08-12
- DIN standard
- 6927 verified
- Fastener description
- Prevailing torque type – All-metal hexagon nuts with flange verified
- ISO equivalent
- 7044 verified
- EN ISO number
- 1664 verified
- Interchangeability
- Width across flat M10 changed verified
- Modification notes
- Width across flat M10 changed verified
Sources disagree
More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.
Fastener description
fullerfasteners.com says fastener description is Prevailing torque type – All-metal hexagon nuts with flange, as of 2026-08-12.
6927 | | 1664 | | 7044 | 1998-02 | Prevailing torque type – All-metal hexagon nuts with flange | Width across flat M10 changed |
https://fullerfasteners.com/tech/din-iso-en-crossover-chart/
monsterbolts.com says fastener description is Variant series., as of 2026-08-12.
DIN 6927 | DIN EN 1664, 1667 | Check spec
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
trfastenings.com says fastener description is Prevailing torque type All-Metal Nuts with flange, as of 2026-08-12.
DIN 6927 | ISO 7044 | | Prevailing torque type All-Metal Nuts with flange | DIN 6927 | ISO 12126 |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
trfastenings.com says fastener description is Prevailing torque type All-Metal Nuts with flange, as of 2026-08-12.
DIN 6927 | ISO 7044 | | Prevailing torque type All-Metal Nuts with flange |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
ISO equivalent
fullerfasteners.com says iso equivalent is 7044, as of 2026-08-12.
6927 | | 1664 | | 7044 | 1998-02 | Prevailing torque type – All-metal hexagon nuts with flange | Width across flat M10 changed |
https://fullerfasteners.com/tech/din-iso-en-crossover-chart/
monsterbolts.com says iso equivalent is 1664, 1667, as of 2026-08-12.
DIN 6927 | DIN EN 1664, 1667 | Check spec
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
trfastenings.com says iso equivalent is 12126, as of 2026-08-12.
DIN 6927 | ISO 7044 | | Prevailing torque type All-Metal Nuts with flange | DIN 6927 | ISO 12126 |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
trfastenings.com says iso equivalent is 7044, as of 2026-08-12.
DIN 6927 | ISO 7044 | | Prevailing torque type All-Metal Nuts with flange |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Interchangeability
fullerfasteners.com says interchangeability is Width across flat M10 changed, as of 2026-08-12.
6927 | | 1664 | | 7044 | 1998-02 | Prevailing torque type – All-metal hexagon nuts with flange | Width across flat M10 changed |
https://fullerfasteners.com/tech/din-iso-en-crossover-chart/
monsterbolts.com says interchangeability is Check spec, as of 2026-08-12.
DIN 6927 | DIN EN 1664, 1667 | Check spec
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
Sources
- fullerfasteners.comhttps://fullerfasteners.com/tech/din-iso-en-crossover-chart/
- monsterbolts.comhttps://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
- trfastenings.comhttps://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
- trfastenings.comhttps://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards