6325
For 6325, fastener description is Parallel pins, Hardened; Tolerance Zone m6; iso equivalent is 8734; interchangeability is Some other nominal lengths defined; modification notes is Some other nominal lengths defined, verified against its source on 2026-08-12.
- DIN standard
- 6325 verified
- Fastener description
- Parallel pins, Hardened; Tolerance Zone m6 verified
- ISO equivalent
- 8734 verified
- Interchangeability
- Some other nominal lengths defined verified
- Modification notes
- Some other nominal lengths defined verified
What the source says
Parallel pins, Hardened; Tolerance Zone m6 | 6325 | 8734 | 28734 | | 8734 | 1998-03 | Parallel pins of hardened and martensitic stainless steel (Dowel pins) | Some other nominal lengths defined |
— fullerfasteners.com, retrieved 2026-08-12
Sources disagree
More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.
Fastener description
fullerfasteners.com says fastener description is Parallel pins, Hardened; Tolerance Zone m6, as of 2026-08-12.
Parallel pins, Hardened; Tolerance Zone m6 | 6325 | 8734 | 28734 | | 8734 | 1998-03 | Parallel pins of hardened and martensitic stainless steel (Dowel pins) | Some other nominal lengths defined |
https://fullerfasteners.com/tech/din-iso-en-crossover-chart/
trfastenings.com says fastener description is Parallel Pins, hardened: tolerance zone m6, as of 2026-08-12.
DIN 6325 | ISO 8734 | | Parallel Pins, hardened: tolerance zone m6 |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Sources
- fullerfasteners.comhttps://fullerfasteners.com/tech/din-iso-en-crossover-chart/
- trfastenings.comhttps://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards