DIN 1475 — Grooved pins – One-third-length centre grooved — ISO 8742
What is the din standard for DIN 1475 — Grooved pins – One-third-length centre grooved — ISO 8742?
For DIN 1475, fastener description is Grooved pins – One-third-length centre grooved; iso equivalent is 8742, verified against its source on 2026-08-12.
1475 | 8742 | 28742 | | 8742 | 1998-03 | Grooved pins – One-third-length centre grooved | Nominal lengths redefined. Shear rate increased. |
— fullerfasteners.com, retrieved 2026-08-12
- DIN standard
- 1475 verified
- Fastener description
- Grooved pins – One-third-length centre grooved verified
- ISO equivalent
- 8742 verified
- Interchangeability
- Nominal lengths redefined. Shear rate increased. verified
- Modification notes
- Nominal lengths redefined. Shear rate increased. verified
Sources disagree
More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.
Fastener description
fullerfasteners.com says fastener description is Grooved pins – One-third-length centre grooved, as of 2026-08-12.
1475 | 8742 | 28742 | | 8742 | 1998-03 | Grooved pins – One-third-length centre grooved | Nominal lengths redefined. Shear rate increased. |
https://fullerfasteners.com/tech/din-iso-en-crossover-chart/
trfastenings.com says fastener description is Grooved Pins, third length centre-grooved, as of 2026-08-12.
DIN 1475 | ISO 8742 | | Grooved Pins, third length centre-grooved |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Sources
- fullerfasteners.comhttps://fullerfasteners.com/tech/din-iso-en-crossover-chart/
- trfastenings.comhttps://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards