Reference Source

Vinylidene fluoride — workplace exposure limit

What is the pel (ppm) for Vinylidene fluoride — workplace exposure limit?

For Vinylidene fluoride, pel (ppm) is 100; pel (mg/m³) is 262; cas no. is 75387, verified against its source on 2026-08-05.

75387 | | Vinylidene fluoride | 100 | 262

dir.ca.gov, retrieved 2026-08-05

100
The most of this substance workplace air may legally contain, averaged over an 8-hour shift — OSHA's permissible exposure limit (PEL), in parts per million, from the agency's own table row quoted below. Where federal OSHA and Cal/OSHA disagree, both limits are stated, each with its own agency's table row as evidence. NIOSH's number, where there is one, is shown separately: it is a recommended limit, not a legal one, and it is often the strictest of the three.
Sourcedir.ca.gov
Verified
Review by
DatasetUS workplace chemical exposure limits: federal OSHA, Cal/OSHA and NIOSH, side by side
Substance
Vinylidene fluoride verified
CAS No.
75387 verified
PEL (ppm)
100 verified
PEL (mg/m³)
262 verified
NIOSH REL (ppm)
TWA 1 per cdc.gov

What cdc.gov says

NIOSH REL TWA 1 ppm C 5 ppm [use 1910.1017]

cdc.gov, retrieved 2026-09-08

Sources

Last verified against source: . Due for re-check by . This page as Markdown · OKF bundle · full dataset as JSON.

What is the OSHA exposure limit for this substance?Find the exposure limit for a substance in workplace air — federal OSHA, California and NIOSH, side by side.