Reference Source

Rubber solvent (Naphtha) — workplace exposure limit

What is the pel (ppm) for Rubber solvent (Naphtha) — workplace exposure limit?

For Rubber solvent (Naphtha), pel (ppm) is 400; pel (mg/m³) is 1,600, verified against its source on 2026-09-29.

Rubber solvent (Naphtha) | 400 | 1,600

— dir.ca.gov, retrieved 2026-09-25

400
The most of this substance workplace air may legally contain, averaged over an 8-hour shift — OSHA's permissible exposure limit (PEL), in parts per million, from the agency's own table row quoted below. Where federal OSHA and Cal/OSHA disagree, both limits are stated, each with its own agency's table row as evidence. NIOSH's number, where there is one, is shown separately: it is a recommended limit, not a legal one, and it is often the strictest of the three.
Sourcedir.ca.gov
Verified
Review by
DatasetUS workplace chemical exposure limits: federal OSHA, Cal/OSHA and NIOSH, side by side
Substance
Rubber solvent (Naphtha) verified
PEL (ppm)
400 verified
PEL (mg/m³)
1,600 verified

Source

Last verified against source: . Due for re-check by . This page as Markdown · OKF bundle · full dataset as JSON.

What is the OSHA exposure limit for this substance?Find the exposure limit for a substance in workplace air — federal OSHA, California and NIOSH, side by side.