Reference Source

Diisobutyl ketone — CAS 108-83-8 — workplace exposure limit

What is the pel (ppm) for Diisobutyl ketone — CAS 108-83-8 — workplace exposure limit?

For Diisobutyl ketone, pel (ppm) is disputed: 50 per osha.gov, 25 per dir.ca.gov; pel (mg/m³) is disputed: 290 per osha.gov, 150 per dir.ca.gov; cas no. is 108-83-8, verified against its source on 2026-08-05.

Diisobutyl ketone | 108-83-8 | 50 | 290 | - |

— osha.gov, retrieved 2026-08-05

50
The most of this substance workplace air may legally contain, averaged over an 8-hour shift — OSHA's permissible exposure limit (PEL), in parts per million, from the agency's own table row quoted below. Where federal OSHA and Cal/OSHA disagree, both limits are stated, each with its own agency's table row as evidence. NIOSH's number, where there is one, is shown separately: it is a recommended limit, not a legal one, and it is often the strictest of the three.
Sourceosha.gov
Verified
Review by
DatasetUS workplace chemical exposure limits: federal OSHA, Cal/OSHA and NIOSH, side by side
Substance
Diisobutyl ketone verified
CAS No.
108-83-8 verified
PEL (ppm)
50 sources disagree
PEL (mg/m³)
290 sources disagree
NIOSH REL (ppm)
TWA 25 per cdc.gov
NIOSH REL (mg/m³)
150 per cdc.gov

What cdc.gov says

NIOSH REL TWA 25 ppm (150 mg/m3)

— cdc.gov, retrieved 2026-09-08

Substance

CDC - NIOSH Pocket Guide to Chemical Hazards - Diisobutyl ketone

CAS No.

CAS No. 108-83-8

What dir.ca.gov says

108838 | | 2,6-Dimethyl-4-heptanone; see Diisobutyl ketone

— dir.ca.gov, retrieved 2026-08-05

Sources disagree

More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.

PEL (ppm)

osha.gov says pel (ppm) is 50, as of 2026-08-05.

Diisobutyl ketone | 108-83-8 | 50 | 290 | - |

https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.1000TableZ1

dir.ca.gov says pel (ppm) is 25, as of 2026-08-05.

108838 | | Diisobutyl ketone; 2,6-dimethyl-4-heptanone | 25 | 150

https://www.dir.ca.gov/title8/5155.html

PEL (mg/m³)

osha.gov says pel (mg/m³) is 290, as of 2026-08-05.

Diisobutyl ketone | 108-83-8 | 50 | 290 | - |

https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.1000TableZ1

dir.ca.gov says pel (mg/m³) is 150, as of 2026-08-05.

108838 | | Diisobutyl ketone; 2,6-dimethyl-4-heptanone | 25 | 150

https://www.dir.ca.gov/title8/5155.html

Sources

Last verified against source: . Due for re-check by . This page as Markdown · OKF bundle · full dataset as JSON.

What is the OSHA exposure limit for this substance?Find the exposure limit for a substance in workplace air — federal OSHA, California and NIOSH, side by side.