Reference Source

Dichlorodifluoromethane — workplace exposure limit

What is the pel (ppm) for Dichlorodifluoromethane — workplace exposure limit?

For Dichlorodifluoromethane, pel (ppm) is 1000; pel (mg/m³) is 4950; cas no. is 75-71-8, verified against its source on 2026-08-05.

Dichlorodifluoromethane | 75-71-8 | 1000 | 4950 | - |

osha.gov, retrieved 2026-08-05

1000
The most of this substance workplace air may legally contain, averaged over an 8-hour shift — OSHA's permissible exposure limit (PEL), in parts per million, from the agency's own table row quoted below. Where federal OSHA and Cal/OSHA disagree, both limits are stated, each with its own agency's table row as evidence. NIOSH's number, where there is one, is shown separately: it is a recommended limit, not a legal one, and it is often the strictest of the three.
Sourceosha.gov
Verified
Review by
DatasetUS workplace chemical exposure limits: federal OSHA, Cal/OSHA and NIOSH, side by side
Substance
Dichlorodifluoromethane verified
CAS No.
75-71-8 verified
PEL (ppm)
1000 verified
PEL (mg/m³)
4950 verified
Ceiling
6200 ppm per dir.ca.gov
NIOSH REL (ppm)
TWA 1000 per cdc.gov
NIOSH REL (mg/m³)
4950 per cdc.gov

What dir.ca.gov says

75718 | | Dichlorodifluoromethane | 1000 | 4950 | 6200 ppm

dir.ca.gov, retrieved 2026-08-05

What cdc.gov says

NIOSH REL TWA 1000 ppm (4950 mg/m3)

cdc.gov, retrieved 2026-09-08

Sources

Last verified against source: . Due for re-check by . This page as Markdown · OKF bundle · full dataset as JSON.

What is the OSHA exposure limit for this substance?Find the exposure limit for a substance in workplace air — federal OSHA, California and NIOSH, side by side.