Reference Source

Acetic acid — workplace exposure limit

What is the pel (ppm) for Acetic acid — workplace exposure limit?

For Acetic acid, pel (ppm) is 10; pel (mg/m³) is 25; cas no. is 64-19-7, verified against its source on 2026-08-05.

Acetic acid | 64-19-7 | 10 | 25 | - |

osha.gov, retrieved 2026-08-05

10
The most of this substance workplace air may legally contain, averaged over an 8-hour shift — OSHA's permissible exposure limit (PEL), in parts per million, from the agency's own table row quoted below. Where federal OSHA and Cal/OSHA disagree, both limits are stated, each with its own agency's table row as evidence. NIOSH's number, where there is one, is shown separately: it is a recommended limit, not a legal one, and it is often the strictest of the three.
Sourceosha.gov
Verified
Review by
DatasetUS workplace chemical exposure limits: federal OSHA, Cal/OSHA and NIOSH, side by side
Substance
Acetic acid verified
CAS No.
64-19-7 verified
PEL (ppm)
10 verified
PEL (mg/m³)
25 verified
Ceiling
40 ppm per dir.ca.gov
STEL (ppm)
15 per dir.ca.gov
STEL (mg/m³)
37 per dir.ca.gov
NIOSH REL (ppm)
TWA 10 per cdc.gov
NIOSH REL (mg/m³)
25 per cdc.gov

What dir.ca.gov says

64197 | | Acetic acid | 10 | 25 | 40 ppm | 15 | 37

dir.ca.gov, retrieved 2026-08-05

What cdc.gov says

NIOSH REL TWA 10 ppm (25 mg/m3) ST 15 ppm (37 mg/m3)

cdc.gov, retrieved 2026-09-08

Sources

Last verified against source: . Due for re-check by . This page as Markdown · OKF bundle · full dataset as JSON.

What is the OSHA exposure limit for this substance?Find the exposure limit for a substance in workplace air — federal OSHA, California and NIOSH, side by side.