STACK LV
What is the inverter brand for STACK LV?
For STACK LV, inverter brand is Victron; battery brand is Dyness; communication interface is BMS-Can; minimum firmware is v3.31; restrictions or notes is Only 48 V Victron inverter/charger models are compatible with Dyness low-voltage batteries. 12 V and 24 V models are not supported, verified against its source on 2026-10-12.
STACK LV | | | |
— victronenergy.com, retrieved 2026-10-12
- Inverter brand
- Victron verified
- Battery brand
- Dyness verified
- Battery model
- STACK LV verified
- Communication interface
- BMS-Can verified
- Minimum firmware
- v3.31 verified
- Restrictions or notes
- Only 48 V Victron inverter/charger models are compatible with Dyness low-voltage batteries. 12 V and 24 V models are not supported. verified
Where each value comes from
This source states these in separate places, so each value is shown with the passage that states it.
Inverter brand, Battery brand and Communication interface
Dyness batteries communicate with the Victron GX device over BMS-Can.
Minimum firmware
Device | Minimum firmware version | Notes | Victron GX device (Venus OS) | v3.31 |
Restrictions or notes
Important: Only 48 V Victron inverter/charger models are compatible with Dyness low-voltage batteries. 12 V and 24 V models are not supported.
— all from victronenergy.com, retrieved 2026-10-12
Source
- victronenergy.comhttps://www.victronenergy.com/live/battery_compatibility:dyness