EBick LV 15
What is the inverter brand for EBick LV 15?
For EBick LV 15, inverter brand is Victron; battery brand is Cegasa; nominal voltage is 48V; communication interface is BMS-Can; minimum firmware is v2.22, recorded from its source on 2026-10-12.
Each Cegasa eBick LV 15 battery module is 15 kWh, approximately 314Ah at 48V (52.2V maximum).
— victronenergy.com, retrieved 2026-10-12
- Inverter brand
- Victron verified
- Battery brand
- Cegasa verified
- Battery model
- EBick LV 15 verified
- Nominal voltage
- 48V verified
- Communication interface
- BMS-Can verified
- Minimum firmware
- v2.22 verified
- Supported system types
- ESS, Grid Backup, Off-grid our reading
- Module capacity
- 15 kWh verified
- Restrictions or notes
- Victron is not compatible with the Cegasa high voltage configuration where battery voltage is increased beyond 48V nominal. verified
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
Where each value comes from
This source states these in separate places, so each value is shown with the passage that states it.
Inverter brand and Battery brand
Victron & Cegasa Battery | EBick LV | EBick LV 15 |
Communication interface
It is essential to use the BMS-Can connection of a GX device with the Cegasa batteries for the communication of charge and discharge limits, error codes and state of charge.
Minimum firmware
When used with Cegasa batteries, the minimum supported firmware version for the GX device is v2.22.
Restrictions or notes
Victron is not compatible with the Cegasa high voltage configuration where battery voltage is increased beyond 48V nominal.
— all from victronenergy.com, retrieved 2026-10-12
Source
- victronenergy.comhttps://www.victronenergy.com/live/battery_compatibility:cegasa