1/4
For 1/4, thread standard is BSPT; threads per inch (tpi) is 19; thread pitch (mm) is 1.337; major (outside) diameter (mm) is 13.16; minor diameter (mm) is 11.45, recorded from its source on 2026-08-12.
- Thread standard
- BSPT our reading
- Nominal size
- 1/4 verified
- Threads per inch (TPI)
- 19 verified
- Thread pitch (mm)
- 1.337 verified
- Major (outside) diameter (mm)
- 13.16 verified
- Minor diameter (mm)
- 11.45 verified
- Thread angle (degrees)
- 55 our reading
- Governing standard
- ISO 7-1 our reading
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
What the source says
13.16 | 12.30 | 11.45 | 0.104 | 11.5 | Rp | <https://www.machiningdoctor.com/threadinfo-bspt/?tid=4533> BSPT Rp 3/8 | 3/8" | 19 | 1.337 | 6.4 | 0 | 16.66 | 15.81 | 14.95 | 0.104 | 15.0 | Rp | <https://www.machiningdoctor.com/threadinfo-bspt/?tid=4534> BSPT Rp 1/2 | 1/2" | 14 | 1.814 | 8.2 | 0 | 20.96 | 19.79 | 18.63 | 0.142 | 18.5 | Rp | <https://www.machiningdoctor.com/threadinfo-bspt/?tid=4535> BSPT Rp 3/4 | 3/4" | 14 | 1.814 | 9.5 | 0 | 26.44 | 25.28 | 24.12 | 0.142 | 24.0 | Rp | <https://www.machiningdoctor.com/threadinfo-bspt/?tid=4536> BSPT Rp 1 | 1" | 11 | 2.309 | 10.4 | 0 | 33.25 | 31.77 | 30.29 | 0.180 | 30.2 | Rp | <https://www.machiningdoctor.com/threadinfo-bspt/?tid=4537> BSPT Rp 1 1/4 | 1 1/4" | 11 | 2.309 | 12.7 | 0 | 41.91 | 40.43 | 38.95 | 0.180 | 39.0 | Rp | <https://www.machiningdoctor.com/threadinfo-bspt/?tid=4538> BSPT Rp 1 1/2 | 1 1/2" | 11 | 2.309 | 12.7 | 0 | 47.80 | 46.32 | 44.85 | 0.180 | 45.0 | Rp | <https://www.machiningdoctor.com/threadinfo-bspt/?tid=4539> BSPT Rp 2 | 2" | 11 | 2.309 | 15.9 | 0 | 59.61 | 58.14 | 56.66 | 0.180 | 56.4 | Rp | <https://www.machiningdoctor.com/threadinfo-bspt/?tid=4540> BSPT Rp 2 1/2 | 2 1/2" | 11 | 2.309 | 17.5 | 0 | 75.18 | 73.71 | 72.23 | 0.216 | -999 | Rp | <https://www.machiningdoctor.com/threadinfo-bspt/?tid=4541> BSPT Rp 3 | 3" | 11 | 2.309 | 20.6 | 0 | 87.88 | 86.41 | 84.93 | 0.216 | -999 | Rp | <https://www.machiningdoctor.com/threadinfo-bspt/?tid=4542> BSPT Rp 4 | 4" | 11 | 2.309 | 25.4 | 0 | 113.03 | 111.55 | 110.07 | 0.216 | -999 | Rp | <https://www.machiningdoctor.com/threadinfo-bspt/?tid=4543> BSPT Rp 5 | 5" | 11 | 2.309 | 28.6 | 0 | 138.43 | 136.95 | 135.47 | 0.216 | -999 | Rp | <https://www.machiningdoctor.com/threadinfo-bspt/?tid=4544> BSPT Rp 6 | 6" | 11 | 2.309 | 28.6 | 0 | 163.83 | 162.35 | 160.87 | 0.216 | -999 | Tolerances and Inspection The ISO 7-1 provides tolerances only for the following dimensions:
— machiningdoctor.com, retrieved 2026-08-12
Source
- machiningdoctor.comhttps://www.machiningdoctor.com/charts/bsp/