Reference Source

Ramps, runways, and other walkways · 1926.501 Duty to have fall protection

What is the hazard situation for Ramps, runways, and other walkways · 1926.501 Duty to have fall protection?

For Ramps, runways, and other walkways · 1926.501 Duty to have fall protection, hazard situation is Ramps, runways, and other walkways; standard is 1926.501 Duty to have fall protection; trigger height is 6 feet (1.8 m) or more to lower levels; required protection once triggered is guardrail systems; subpart is Subpart M —Fall Protection, recorded from its source on 2026-08-25; source re-checked 2026-09-14.

(6) Ramps, runways, and other walkways. Each employee on ramps, runways, and other walkways shall be protected from falling 6 feet (1.8 m) or more to lower levels by guardrail systems.

ecfr.gov, retrieved 2026-08-25

Hazard situation
Ramps, runways, and other walkways verified
Standard
1926.501 Duty to have fall protection verified
Trigger height
6 feet (1.8 m) or more to lower levels verified
Required protection once triggered
guardrail systems verified
Subpart
Subpart M —Fall Protection verified
CFR paragraph
29 CFR 1926.501(b)(6) our reading
Sourceecfr.gov
Verified
Review by
DatasetOSHA fall protection trigger height by standard

Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.

Source

Last verified against source: . Due for re-check by . This page as Markdown · OKF bundle · full dataset as JSON.