Wood Building Products Surface Coating (formerly Flat Wood Paneling Products)
For Wood Building Products Surface Coating (formerly Flat Wood Paneling Products), cfr subpart is 40 CFR 63 Subpart QQQQ; source type is major sources; original final rule date is 2003-05-28; most recent amendment date is 2019-03-04; rtr status is not stated, recorded from its source on 2026-09-29.
- source category
- Wood Building Products Surface Coating (formerly Flat Wood Paneling Products)
- cfr subpart
- 40 CFR 63 Subpart QQQQ
- source type
- major sources our reading
- original final rule date
- 2003-05-28
- most recent amendment date
- 2019-03-04
- rtr status
- not stated our reading
- key haps regulated
- toluene, benzene, glycol ethers, methyl ethyl ketone, methyl isobutyl ketone, methanol, styrene, formaldehyde
- epa category url
- https://www.epa.gov/stationary-sources-air-pollution/surface-coating-wood-building-products-national-emission-1 our reading
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
What the source says
The final standards establish emission limitations, operating limits, and work practice requirements for all major sources that apply a surface coating to a wood building product to reduce certain organics listed as hazardous air pollutants (HAP) in section 112 of the Clean Air Act (CAA). These standards implement section 112(d) of the CAA by requiring all major sources to meet the HAP emission standards reflecting the application of the maximum achievable control technology (MACT).
— epa.gov, retrieved 2026-09-29
Source
- epa.govhttps://www.epa.gov/stationary-sources-air-pollution/surface-coating-wood-building-products-national-emission-1