Printing and Publishing Surface Coating
For Printing and Publishing Surface Coating, cfr subpart is 40 CFR 63 Subpart KK; source type is major sources; original final rule date is 1996-05-30; most recent amendment date is 2011-04-21; rtr status is completed, recorded from its source on 2026-09-29.
- source category
- Printing and Publishing Surface Coating
- cfr subpart
- 40 CFR 63 Subpart KK
- source type
- major sources our reading
- original final rule date
- 1996-05-30
- most recent amendment date
- 2011-04-21
- rtr status
- completed our reading
- key haps regulated
- xylene, toluene, ethylbenzene, methyl ethyl ketone, methyl isobutyl ketone, methanol, ethylene glycol, and certain glycol ethers
- epa category url
- https://www.epa.gov/stationary-sources-air-pollution/printing-and-publishing-industry-national-emission-standards our reading
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
What the source says
These standards will reduce nationwide emissions of HAP from rotogravure and wide-web flexographic printing operations by approximately 6700 Mg/yr (7400 tpy) in 1999 and, to some extent, reduce volatile organic compounds (VOC) emissions from those same operations.
— epa.gov, retrieved 2026-09-29
Where each value comes from
The value above is stated away from the sentence quoted with the answer, so the passage that states it is shown here too.
rtr status
Printing and Publishing | 10/21/2010 | 4/21/2011
— all from epa.gov, retrieved 2026-09-29