Leather Finishing Operations
For Leather Finishing Operations, cfr subpart is 40 CFR 63 Subpart TTTT; source type is major sources; original final rule date is 2002-02-27; most recent amendment date is 2002-02-27; rtr status is completed, recorded from its source on 2026-09-29.
- source category
- Leather Finishing Operations verified
- cfr subpart
- 40 CFR 63 Subpart TTTT
- source type
- major sources our reading
- original final rule date
- 2002-02-27
- most recent amendment date
- 2002-02-27
- rtr status
- completed our reading
- key haps regulated
- glycol ethers, toluene, and xylene verified
- epa category url
- https://www.epa.gov/stationary-sources-air-pollution/leather-finishing-operations-national-emission-standards-hazardous our reading
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
What the source says
This action promulgates national emission standards for hazardous air pollutants (NESHAP) for leather finishing operations. The EPA has identified these facilities as major sources of emissions of hazardous air pollutants (HAP), such as glycol ethers, toluene, and xylene. These NESHAP will implement section 112(d) of the Clean Air Act (CAA) by requiring all leather finishing operations that are major sources to meet HAP emission standards reflecting the application of the maximum achievable control technology (MACT).
— epa.gov, retrieved 2026-09-29
Where each value comes from
The value above is stated away from the sentence quoted with the answer, so the passage that states it is shown here too.
rtr status
Leather Finishing | 3/14/2018 | 2/12/2019
— all from epa.gov, retrieved 2026-09-29