Fabric Printing, Coating and Dyeing
For Fabric Printing, Coating and Dyeing, cfr subpart is 40 CFR 63 Subpart OOOO; source type is major sources; original final rule date is 2003-05-29; most recent amendment date is 2020-07-08; rtr status is completed, recorded from its source on 2026-08-15.
- source category
- Fabric Printing, Coating and Dyeing
- cfr subpart
- 40 CFR 63 Subpart OOOO
- source type
- major sources our reading
- original final rule date
- 2003-05-29
- most recent amendment date
- 2020-07-08
- rtr status
- completed our reading
- key haps regulated
- toluene, methyl ethyl ketone (MEK), methanol, xylenes, methyl isobutyl ketone (MIBK), methylene chloride, trichloroethylene, n-hexane, glycol ethers (ethylene glycol), and formaldehyde
- epa category url
- https://www.epa.gov/stationary-sources-air-pollution/printing-coating-and-dyeing-fabrics-and-other-textiles-national our reading
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
What the source says
The final standards implement section 112(d) of the Clean Air Act (CAA) by requiring all major sources to meet the hazardous air pollutants (HAP) emission standards reflecting the application of the maximum achievable control technology (MACT).
— epa.gov, retrieved 2026-08-15
Where each value comes from
The value above is stated away from the sentence quoted with the answer, so the passage that states it is shown here too.
rtr status
Surface Coating of Large Appliances, Surface Coating of Metal Furniture, and Printing, Coating, and Dyeing of Fabrics | 9/12/2018 | 3/15/2019
— all from epa.gov, retrieved 2026-08-15