Dimensional measuring instruments · Annex XI · multidimensional measuring instrument, edge length of the parallelepiped

For Dimensional measuring instruments, annex is Annex XI; condition is multidimensional measuring instrument, edge length of the parallelepiped; maximum permissible error is ± 1,0 d, recorded from its source on 2026-09-01.

Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.

What the source says

CHAPTER IV Multidimensional measuring instruments Operating conditions 1.1. Range Dimensions within the range specified by the manufacturer for the instrument. 1.2. Minimum dimension The lower limit of the minimum dimension for all values of the scale interval is given in Table 1. Table 1 Scale interval (d) | Minimum dimension (min) (lower limit) | d ≤ 2 cm | 10 d | 2 cm < d ≤ 10 cm | 20 d | 10 cm < d | 50 d | 1.3. Speed of the product The speed must be within the range specified by the manufacturer for the instrument. MPE 2. Instrument: The MPE is ± 1,0 d.

— eur-lex.europa.eu, retrieved 2026-09-01

Where each value comes from

This source states these in separate places, so each value is shown with the passage that states it.

— all from eur-lex.europa.eu, retrieved 2026-09-01

Source

• eur-lex.europa.euhttps://eur-lex.europa.eu/legal-content/EN/TXT/HTML/?uri=CELEX:32014L0032

Last verified against source: 2026-09-01. Due for re-check by 2027-09-01. This page as Markdown · OKF bundle · full dataset as JSON.