Reference Source

Dimensional measuring instruments · Annex XI · length measuring instrument for rope-type materials, class III

For Dimensional measuring instruments, annex is Annex XI; condition is length measuring instrument for rope-type materials, class III; accuracy class is III; maximum permissible error is 0,5 %, but not less than 0,02 Lm, recorded from its source on 2026-09-01.

Instrument type
Dimensional measuring instruments verified
Annex
Annex XI verified
Accuracy class
III verified
Condition
length measuring instrument for rope-type materials, class III our reading
Maximum permissible error
0,5 %, but not less than 0,02 Lm verified
Sourceeur-lex.europa.eu
Verified
Review by
DatasetAccuracy classes and maximum permissible errors for trade measuring instruments

Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.

What the source says

MPEs 3. Instrument Table 2 Accuracy class | MPE | I | 0,125 %, but not less than 0,005 Lm | II | 0,25 %, but not less than 0,01 Lm | III | 0,5 %, but not less than 0,02 Lm | Where Lm is the minimum measurable length

— eur-lex.europa.eu, retrieved 2026-09-01

Where each value comes from

This source states these in separate places, so each value is shown with the passage it comes from.

Instrument type

ANNEX XI DIMENSIONAL MEASURING INSTRUMENTS (MI-009) The relevant essential requirements of Annex I, the specific requirements of this Annex and the conformity assessment procedures listed in this Annex, apply to dimensional measuring instruments of the types defined below.

Annex

ANNEX XI DIMENSIONAL MEASURING INSTRUMENTS (MI-009)

Accuracy class

The source prints this value inside the passage below but does not name it there. The passage shows where it appears; what ties it to this record is the position on the page, not anything the passage says.

MPEs 3. Instrument Table 2 Accuracy class | MPE | I | 0,125 %, but not less than 0,005 Lm | II | 0,25 %, but not less than 0,01 Lm | III

Maximum permissible error

MPEs 3. Instrument Table 2 Accuracy class | MPE | I | 0,125 %, but not less than 0,005 Lm | II | 0,25 %, but not less than 0,01 Lm | III | 0,5 %, but not less than 0,02 Lm

— all from eur-lex.europa.eu, retrieved 2026-09-01

Source

Last verified against source: . Due for re-check by . This page as Markdown · OKF bundle · full dataset as JSON.