Withdrawn and superseded ISO standards — page 99 of 246

3639,IS,Amd,ISO 31-6:1980/Amd 1:1985,Quantities and units of light and related electromagnetic radiations — Amendment 1,Grandeurs et unités de lumière et de rayonnements électromagnétiques connexes — Amendement 1,1985-08-08,2,['01.060'],ISO/TC 12,9599,,[3638],['en'],1,

3638,IS,,ISO 31-6:1992,Quantities and units — Part 6: Light and related electromagnetic radiations,Grandeurs et unités — Partie 6: Lumière et rayonnements électromagnétiques connexes,1992-08-27,3,['01.060'],ISO/TC 12,9599,"[3639,3637]",[31892],"['en','fr']",19,"<p>Gives name, symbol and definition for 57 quantities and units pertaining to light and related electromagnetic radiations. Where appropriate, conversion factors are also given.</p>"

28978,IS,Amd,ISO 31-6:1992/Amd 1:1998,Quantities and units — Part 6: Light and related electromagnetic radiations — Amendment 1,Grandeurs et unités — Partie 6: Lumière et rayonnements électromagnétiques connexes — Amendement 1,1998-12-20,3,['01.060'],ISO/TC 12,9599,,[31892],"['en','fr']",1,

3640,IS,,ISO 31-7:1978,Quantities and units of acoustics,Grandeurs et unités d'acoustique,1978-03-01,1,['01.060'],ISO/TC 12,9599,,[3641],"['en','fr']",13,

3642,IS,Amd,ISO 31-7:1978/Amd 1:1985,Quantities and units of acoustics — Amendment 1,Grandeurs et unités d'acoustique — Amendement 1,1985-08-08,1,['01.060'],ISO/TC 12,9599,,[3641],['en'],1,

3641,IS,,ISO 31-7:1992,Quantities and units — Part 7: Acoustics,Grandeurs et unités — Partie 7: Acoustique,1992-08-27,2,['01.060'],ISO/TC 12,9599,"[3642,3640]","[40669,31893]","['en','fr']",11,"<p>Gives name, symbol and definition for 39 quantities and units of acoustics. Where appropriate, conversion factors are also given.</p>"

28979,IS,Amd,ISO 31-7:1992/Amd 1:1998,Quantities and units — Part 7: Acoustics — Amendment 1,Grandeurs et unités — Partie 7: Acoustique — Amendement 1,1998-12-20,2,['01.060'],ISO/TC 12,9599,,[40669],"['en','fr']",1,

3643,IS,,ISO 31-8:1980,Quantities and units of physical chemistry and molecular physics,Grandeurs et unités de chimie physique et de physique moléculaire,1980-12-01,2,['01.060'],ISO/TC 12,9599,,[3644],"['en','fr']",18,

3645,IS,Amd,ISO 31-8:1980/Amd 1:1985,Quantities and units of physical chemistry and molecular physics — Amendment 1,Grandeurs et unités de chimie physique et de physique moléculaire — Amendement 1,1985-08-08,2,['01.060'],ISO/TC 12,9599,,[3644],['en'],1,

3644,IS,,ISO 31-8:1992,Quantities and units — Part 8: Physical chemistry and molecular physics,Grandeurs et unités — Partie 8: Chimie physique et physique moléculaire,1992-12-17,3,['01.060'],ISO/TC 12,9599,"[3643,3645]",[31894],"['en','fr']",25,"<p>This document is part 8 of ISO 31, which deals with the quantities and units in the various fields of science and technology.</p>"

28980,IS,Amd,ISO 31-8:1992/Amd 1:1998,Quantities and units — Part 8: Physical chemistry and molecular physics — Amendment 1,Grandeurs et unités — Partie 8: Chimie physique et physique moléculaire — Amendement 1,1998-12-20,3,['01.060'],ISO/TC 12,9599,,[31894],"['en','fr']",1,

3646,IS,,ISO 31-9:1980,Quantities and units of atomic and nuclear physics,Grandeurs et unités de physique atomique et nucléaire,1980-12-01,2,['01.060'],ISO/TC 12,9599,,[3647],"['en','fr']",13,

3648,IS,Amd,ISO 31-9:1980/Amd 1:1985,Quantities and units of atomic and nuclear physics — Amendment 1,Grandeurs et unités de physique atomique et nucléaire — Amendement 1,1985-08-08,2,['01.060'],ISO/TC 12,9599,,[3647],['en'],1,

3647,IS,,ISO 31-9:1992,Quantities and units — Part 9: Atomic and nuclear physics,Grandeurs et unités — Partie 9: Physique atomique et nucléaire,1992-08-27,3,['01.060'],ISO/TC 12,9599,"[3646,3648]",[31895],"['en','fr']",20,"<p>Gives name, symbol and definition for 51 quantities and units of atomic and nuclear physics. Where appropriate, conversion factors are also given. Annex A includes names of symbols of the chemical elements, Annex B the notation of symbols for chemical elements and nuclides, Annex C the original names and symbols for nuclides of radioactive series, Annex D examples of relations in different systems of equations using different systems of units.</p>"

28981,IS,Amd,ISO 31-9:1992/Amd 1:1998,Quantities and units — Part 9: Atomic and nuclear physics — Amendment 1,Grandeurs et unités — Partie 9: Physique atomique et nucléaire — Amendement 1,1998-12-20,3,['01.060'],ISO/TC 12,9599,,[31895],"['en','fr']",1,

4248,IS,,ISO 310:1981,Manganese ores — Determination of hygroscopic moisture content in analytical samples — Gravimetric method,Minerais de manganèse — Détermination de l'humidité des échantillons pour analyse — Méthode gravimétrique,1981-08-01,2,['73.060.20'],ISO/TC 65,9599,,[4249],"['en','fr']",1,

8244,IS,,ISO 3100-1:1975,Meat and meat products — Sampling — Part 1: Taking primary samples,Viandes et produits à base de viande — Échantillonnage — Partie 1: Prélèvements élémentaires,1975-07-01,1,['67.120.10'],ISO/TC 34/SC 6,9599,,[8245],['en'],3,

8245,IS,,ISO 3100-1:1991,Meat and meat products — Sampling and preparation of test samples — Part 1: Sampling,Viandes et produits à base de viande — Échantillonnage et préparation des échantillons pour essai — Partie 1: Échantillonnage,1991-03-14,2,['67.120.10'],ISO/TC 34/SC 6,9599,[8244],"[28599,33146]","['en','fr']",4,"<p>This second edition cancels and replaces the first edition (ISO 3100-1:1975). Part 1 of ISO 3100 deals with taking primary samples or secondary samples from meat and meat products. It applies to sampling for commercial purposes. In the case of official food inspection, it may be necessary to follow other procedures. Gives a normative reference. The definitions given in IS

8246,IS,,ISO 3100-2:1988,Meat and meat products — Sampling and preparation of test samples — Part 2: Preparation of test samples for microbiological examination,Viandes et produits à base de viande — Échantillonnage et préparation des échantillons pour essai — Partie 2: Préparation des échantillons pour essai en vue de l'examen microbiologique,1988-06-23,1,['07.100.30'],ISO/TC 34/SC 6,9599,,"[38338,29866]","['en','fr']",4,"<p>The method gives general instructions and specifies procedures to be followed after taking a laboratory sample. This may require the thawing and/or mincing of 'open' samples or the pre-incubation, external sterilisation, and aseptic opening of products processed or pack

43170,IS,,ISO 31000:2009,Risk management — Principles and guidelines,Management du risque — Principes et lignes directrices,2009-11-13,1,['03.100.01'],ISO/TC 262,9599,,[65694],"['ar','en','fr']",24,"<p>ISO 31000:2009 provides principles and generic guidelines on risk management.</p><p>ISO 31000:2009 can be used by any public, private or community enterprise, association, group or individual. Therefore, ISO 31000:2009 is not specific to any industry or sector.</p><p>ISO 31000:2009 can be applied

8248,IS,,ISO 3101:1981,Wheels and castors — Triangular top plates with three fixing holes,Roues et roulettes de manutention — Platines triangulaires à trois trous de fixation,1981-10-01,2,['53.060'],ISO/TC 110,9599,,"[36542,36543]","['en','fr']",2,<p>Specifies the main dimensions of these top plates. Applies to top plates relating to ISO 2163 and used for swivel castors.</p>

8249,IS,,ISO 3102:1981,Wheels and castors for non-powered equipment — Off-set for swivel castors,Roues et roulettes de manutention pour engins de manutention non automoteurs — Déport pour roulettes à pivotement libre,1981-10-01,2,['53.060'],ISO/TC 110,9599,,"[36542,36543]","['en','fr']",1,<p>Does not cover wheels used for furniture and toys. Gives the dimensions (diameter of wheel related to off-set).</p>

8250,IS,,ISO 3103:1980,Tea — Preparation of liquor for use in sensory tests,Thé — Préparation d'une infusion en vue d'examens organoleptiques,1980-04-01,1,"['67.240','67.140.10']",ISO/TC 34/SC 8,9599,,[73224],"['en','fr']",4,"<p>The method consists in extracting of soluble substances in dried tea leaf, containing in a porcelain or earthenware pot, by means of freshly boiling water, pouring of the liquor into a white porcelain or earthenware bowl, examination of the organoleptic properties of the infused leaf, and of the liquor with or without milk or both.</p>"

8251,IS,,ISO 3104:1976,Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity,Produits pétroliers — Liquides opaques et transparents — Détermination de la viscosité cinématique et calcul de la viscosité dynamique,1976-06-01,1,['75.080'],ISO/TC 28,9599,,[8252],"['en','fr']",5,

8252,IS,,ISO 3104:1994,Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity,Produits pétroliers — Liquides opaques et transparents — Détermination de la viscosité cinématique et calcul de la viscosité dynamique,1994-10-06,2,['75.080'],ISO/TC 28,9599,[8251],"[67965,44093]","['en','fr']",13,<p>The document specifies a procedure for the determination of the kinematic viscosity and shows how the dynamic viscosity can be obtained.</p>

29014,IS,Cor,ISO 3104:1994/Cor 1:1997,Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity — Technical Corrigendum 1,Produits pétroliers — Liquides opaques et transparents — Détermination de la viscosité cinématique et calcul de la viscosité dynamique — Rectificatif technique 1,1997-07-17,2,['75.080'],ISO/TC 28,9599,,"[67965,44093]","['en','fr']",2,

67965,IS,,ISO 3104:2020,Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity,Produits pétroliers — Liquides opaques et transparents — Détermination de la viscosité cinématique et calcul de la viscosité dynamique,2020-09-16,3,['75.080'],ISO/TC 28,9599,"[8252,29014]",[81853],"['en','fr']",24,"<p>This document specifies Procedure A, using manual glass viscometers, and Procedure B, using glass capillary viscometers in an automated assembly, for the determination of the kinematic viscosity, <i>ν</i>, of liquid petroleum products, both transparent and opaque, by measuring the time for a volume of liquid to flow under gravit

8253,IS,,ISO 3105:1976,Glass capillary kinematic viscometers — Specification and operating instructions,"Viscosimètres à capillaire, en verre, pour viscosité cinématique — Spécifications et modes d'emploi",1976-08-01,1,['17.060'],ISO/TC 28,9599,,[8254],"['en','fr']",28,

8255,IS,,ISO 3106:1974,Dental zinc oxide/eugenol filling materials,Produits d'obturation dentaire à base d'oxyde de zinc-eugénol,1974-10-01,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[8257],"['en','fr']",8,

8256,IS,,ISO 3107:1974,Dental zinc oxide/eugenol cementing materials,Ciments dentaires à base d'oxyde de zinc-eugénol,1974-10-01,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[8257],"['en','fr']",10,

8257,IS,,ISO 3107:1988,Dental zinc oxide/eugenol cements and zinc oxide non-eugenol cements,Ciments dentaires à base d'oxyde de zinc-eugénol et ciments dentaires à base d'oxyde de zinc sans eugénol,1988-10-27,2,['11.060.10'],ISO/TC 106/SC 1,9599,"[8255,8256]",[36494],"['en','fr']",10,<p>Cancels and replaces ISO 3106/74 and ISO 3107/74. It specifies requirements and test methods for cements delivered as separate components and used in restorative dentistry for temporary and permanent cementation. Specific qualitative or quantitative requirements for freedom from biological or toxicological hazards are not included.</p>

36494,IS,,ISO 3107:2004,Dentistry — Zinc oxide/eugenol and zinc oxide/non-eugenol cements,Art dentaire — Ciments dentaires à base d'oxyde de zinc-eugénol et à base d'oxyde de zinc sans eugénol,2004-09-22,3,['11.060.10'],ISO/TC 106/SC 1,9599,[8257],[45800],"['en','fr']",14,"<p>ISO 3107:2004 specifies the requirements and performance test methods for non-water-based zinc oxide/eugenol cements suitable for use in restorative dentistry for temporary cementation, for permanent cementation, for cavity liners and bases and as temporary restorations. </p><p>ISO 3107:2004 is also applicable to non-eugenol cements containing zinc oxide and aromatic oils suitable for temporary cementation.</p>"

43988,IS,Cor,ISO 3107:2004/Cor 1:2006,Dentistry — Zinc oxide/eugenol and zinc oxide/non-eugenol cements — Technical Corrigendum 1,Art dentaire — Ciments dentaires à base d'oxyde de zinc-eugénol et à base d'oxyde de zinc sans eugénol — Rectificatif technique 1,2006-03-03,3,['11.060.10'],ISO/TC 106/SC 1,9599,,[45800],"['en','fr']",1,

45800,IS,,ISO 3107:2011,Dentistry — Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements,Médecine bucco-dentaire — Ciments dentaires à base d'oxyde de zinc-eugénol et à base d'oxyde de zinc sans eugénol,2011-02-23,4,['11.060.10'],ISO/TC 106/SC 1,9599,"[36494,43988]",[84407],"['en','fr']",10,"<p>ISO 3107:2011 specifies requirements for non-water-based zinc oxide/eugenol cements suitable for use in restorative dentistry for temporary cementation, for bases and as temporary restorations.</p><p>ISO 3107:2011 also specifies requirements for non-eugenol cements containing zinc oxide and aromatic oils suitable for temporary cementation.</p>"

8258,IS,,ISO 3108:1974,Steel wire ropes for general purposes — Determination of actual breaking load,Câbles en acier pour usages courants — Détermination de la charge de rupture effective,1974-03-01,1,['77.140.65'],ISO/TC 105,9599,,[66725],"['en','fr']",1,"<p>Describes a method of tensile test to destruction. May be used for steel wire ropes for general purposes (see ISO 2408) or other ropes, unless the standard concerned specifically excludes its use, or gives another method. Specifies test piece including test length, testing and test report.</p>"

8259,IS,,ISO 3109:1974,Assembly tools for screws and nuts — Hexagon insert bits for hexagon socket head screws,"Outils de manoeuvre pour vis et écrous — Embouts six pans mâles, à hexagone conducteur mâle",1974-07-01,1,['25.140.01'],ISO/TC 29,9599,,[8260],"['en','fr']",2,

8260,IS,,ISO 3109:1984,Assembly tools for screws and nuts — Hexagon insert bits for hexagon socket head screws,"Outils de manoeuvre pour vis et écrous — Embouts six pans mâles, à hexagone conducteur mâle",1984-10-01,2,['25.140.01'],ISO/TC 29/SC 10,9599,[8259],[29902],"['en','fr']",2,

8272,IS,,ISO 3115:1981,Castings in magnesium alloys containing zirconium — Chemical composition and mechanical properties,Pièces moulées en alliages de magnésium contenant du zirconium — Composition chimique et caractéristiques mécaniques,1981-07-01,2,['77.150.20'],ISO/TC 79/SC 5,9599,[6912],[28573],"['en','fr']",2,

8273,IS,,ISO 3116:1981,Wrought magnesium alloys — Chemical composition and mechanical properties,Alliages de magnésium corroyés — Composition chimique et caractéristiques mécaniques,1981-07-01,2,['77.120.20'],ISO/TC 79/SC 5,9599,[4558],[28574],"['en','fr']",3,

28574,IS,,ISO 3116:2001,Magnesium and magnesium alloys — Wrought magnesium alloys,Magnésium et alliages de magnésium — Alliages de magnésium corroyés,2001-04-05,3,['77.120.20'],ISO/TC 79/SC 5,9599,[8273],[45467],"['en','fr']",12,

45467,IS,,ISO 3116:2007,Magnesium and magnesium alloys — Wrought magnesium alloys,Magnésium et alliages de magnésium — Alliages de magnésium corroyés,2007-04-16,4,['77.120.20'],ISO/TC 79/SC 5,9599,"[42805,28574]",[72476],['en'],12,"<p>ISO 3116:2007 specifies the chemical composition and mechanical properties of magnesium alloys for wrought products in the form of bars and solid sections, tubes and hollow sections, forgings, and plate and sheet.</p>"

4251,IS,,ISO 312:1980,"Manganese ores — Determination of active oxygen content, expressed as manganese dioxide — Volumetric method","Minerais de manganèse — Dosage de l'oxygène actif, exprimé en dioxyde de manganèse — Méthode volumétrique",1980-05-01,2,['73.060.20'],ISO/TC 65,9599,,[4252],"['en','fr']",2,

8283,IS,,ISO 3126:1974,Plastics pipes — Measurement of dimensions,Tubes en matières plastiques — Mesurage des dimensions,1974-08-01,1,['23.040.20'],ISO/TC 138/SC 5,9599,,[32202],"['en','fr']",2,"<p>Specification of the measuring apparatus and procedure to be used for the determination of the dimensions of plastics pipes. Following dimensions are to be determined: Wall thickness at any point (precision 0,05 mm), mean outside diameter (rounded to nearest 0,1 mm) and outside diameter at any point (rounded to 0,1 mm).</p>"

8284,IS,,ISO 3127:1980,Unplasticized polyvinyl chloride (PVC) pipes for the transport of fluids — Determination and specification of resistance to external blows,Tubes en polychlorure de vinyle (PVC) non plastifié pour le transport des fluides — Détermination et spécification de la résistance aux chocs extérieurs,1980-12-01,1,['23.040.20'],ISO/TC 138,9599,,[8285],"['en','fr']",8,

8287,IS,,ISO 3129:1975,Wood — Sampling methods and general requirements for physical and mechanical tests,Bois — Méthodes d'échantillonnage et conditions générales pour les essais physiques et mécaniques,1975-11-01,1,['79.040'],ISO/TC 218,9599,,[52489],"['en','fr']",4,"<p>Specifies the selective and mechanical sampling, conditioning of selected material and the preparation of test pieces. Selective method should be used in cases where the coefficients of variation of the wood properties for one tree and between trees of one species are known and selection is possible from a large number of trees, logs and pieces of sawn timber, and the mechanical method when the mean values of the above coef

52489,IS,,ISO 3129:2012,Wood — Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens,Bois — Méthodes d'échantillonnage et conditions générales pour les essais physiques et mécaniques de petites éprouvettes de bois net,2012-01-24,2,['79.040'],ISO/TC 218,9599,[8287],[74839],['en'],9,

8288,IS,,ISO 3130:1975,Wood — Determination of moisture content for physical and mechanical tests,Bois — Détermination de l'humidité en vue des essais physiques et mécaniques,1975-11-01,1,['79.040'],ISO/TC 218,9599,,"[52503,60070,60071,60063]","['en','fr']",2,"<p>Specifies a method that determines, by weighing, the loss in mass of the test piece on drying to constant mass. Calculation of the loss in mass as a percentage of test piece mass after drying. Reference is made to ISO 3129.</p>"

8289,IS,,ISO 3131:1975,Wood — Determination of density for physical and mechanical tests,Bois — Détermination de la masse volumique en vue des essais physiques et mécaniques,1975-11-01,1,['79.040'],ISO/TC 218,9599,,"[60064,52504]","['en','fr']",2,<p>The method described determines the moisture content at the time of test and in the absolutely dry condition as well as the mass ratio in the absolutely dry condition to volume of the test piece with moisture content greater than or equal to the fibre saturation point.</p>

8290,IS,,ISO 3132:1975,Wood — Testing in compression perpendicular to grain,Bois — Essai de compression perpendiculaire aux fibres,1975-11-01,1,['79.040'],ISO/TC 218,9599,,"[74335,52507,60067]","['en','fr']",2,"<p>Determination of the proportional limit (conventional ultimate strength), the load being applied to the whole surface (radial or tangential) of the test piece. References are made to ISO 3129 and ISO 3130.</p>"

8291,IS,,ISO 3133:1975,Wood — Determination of ultimate strength in static bending,Bois — Détermination de la résistance à la flexion statique,1975-11-01,1,['79.040'],ISO/TC 218,9599,,"[60065,52505]","['en','fr']",2,"<p>Describes apparatus, preparation of test pieces as well as procedure and calculation and expression of results in detail. References are made to ISO 3129 and ISO 3130.</p>"

8293,IS,,ISO 3134-1:1985,Light metals and their alloys — Terms and definitions — Part 1: Materials,Métaux légers et leurs alliages — Termes et définitions — Partie 1: Matériaux,1985-05-30,1,"['01.040.77','77.150.01','77.120.01']",ISO/TC 79,9599,[8292],"[37470,41793]","['en','fr','ru']",6,"<p>This part of ISO 3134 defines relating to materials special terms to aluminium and aluminium alloys and general terms such as alloy, alloying element, impurity, wrought alloy, casting alloy, master alloy, heat-treatable alloy etc. Magnesium and magnesium alloys will be classified to a later time.</p>"

8295,IS,,ISO 3134-2:1985,Light metals and their alloys — Terms and definitions — Part 2: Unwrought products,Métaux légers et leurs alliages — Termes et définitions — Partie 2: Formes brutes,1985-05-30,1,"['01.040.77','77.150.01']",ISO/TC 79,9599,[8294],"[37471,41793]","['en','fr','ru']",2,"<p>This part of ISO 3134 defines following terms: unwrought product, ingot for rolling, ingot for extruding, ingot for forging, ingot for remelting.</p>"

8297,IS,,ISO 3134-3:1985,Light metals and their alloys — Terms and definitions — Part 3: Wrought products,Métaux légers et leurs alliages — Termes et définitions — Partie 3: Produits corroyés,1985-06-13,1,"['01.040.77','77.150.01']",ISO/TC 79,9599,[8296],"[41793,37472]","['en','fr','ru']",10,"<p>This part of ISO 3134 defines terms relating to wrought products (rod/bar, wire, tube, profile, sheet, strip, forging), produced by hot and/or cold plastic deformation processes (such as extruding, forging, hot rolling, cold rolling or drawing). An annex gives explaining notes to some definitions.</p>"

8299,IS,,ISO 3134-4:1985,Light metals and their alloys — Terms and definitions — Part 4: Castings,Métaux légers et leurs alliages — Termes et définitions — Partie 4: Produits moulés,1985-05-30,1,"['77.150.01','01.040.77']",ISO/TC 79,9599,[8298],"[37473,41793]","['en','fr','ru']",2,"<p>This part of ISO 3134 defines terms relating to castings (to sand casting, permanent mould casting, pressure die casting and centrifugal casting).</p>"

8300,IS,,ISO 3134-5:1981,Light metals and their alloys — Terms and definitions — Part 5: Methods of processing and treatment,Métaux légers et leurs alliages — Termes de référence et définitions — Partie 5: Méthodes d'élaboration et de traitement,1981-07-01,1,"['01.040.77','77.020']",ISO/TC 79,9599,,"[41793,38350]","['en','fr']",1,"<p>This part of ISO 3134 defines terms relating to methods of processing and heat treatment such as hot and cold working, strain hardening, annealing and partial annealing, temper, homogenizing, natural ageing, solution heated and artifically aged, precipitation heat treatment, quenching, solution heat treatment, stabilizing.</p>"

8301,IS,,ISO 3136:1983,Rubber latex — Styrene-butadiene — Determination of bound styrene content,Latex de caoutchoucs — Styrène-butadiène — Détermination de la teneur en styrène lié,1983-04-01,2,['83.040.10'],ISO/TC 45/SC 3,9599,,[83148],"['en','fr']",1,<p>Specifies a method for the determination of the bound styrene content of styrene-butadiene rubber (SBR) latices. Applicable to hot emulsion polymerized SBR latices having a bound styrene content of up to 55 % and to cold emulsion polymerized SBR latices having a bound styrene content between 18 and 40 %. This second edition cancels and replaces the first edition (1975).</p>

8306,IS,,ISO 3140:1976,"Oil of sweet orange, obtained by expression","Huile essentielle d'orange douce, obtenue par expression",1976-12-01,1,['71.100.60'],ISO/TC 54,9599,,[8307],['en'],2,

8307,IS,,ISO 3140:1990,"Oil of sweet orange (Citrus sinensis (Linnaeus) Obsbeck), obtained by mechanical treatment",Huile essentielle d'orange douce (Citrus sinensis (Linnaeus) Obsbeck) obtenue par des procédés mécaniques,1990-12-20,2,['71.100.60'],ISO/TC 54,9599,[8306],"[37542,26790]","['en','fr']",2,"<p>Gives certain characteristics of this oil, with a view of facilitating the assessment of its quality. Includes the definition of this oil, requirements for colour, odour, relative density, refractive index, optical rotation, residue on evaporation and carbonyl compounds content, expressed as decanal, sampling, methods of test, packaging, labelling and marking.</p>"

37542,IS,,ISO 3140:2005,"Oil of sweet orange (Citrus sinensis (L.) Osbeck), obtained by mechanical treatment",Huile essentielle d'orange douce (Citrus sinensis (L.) Osbeck) obtenue par des procédés mécaniques,2005-09-09,3,['71.100.60'],ISO/TC 54,9599,[8307],[46430],"['en','fr']",8,"<p>ISO 3140:2005 specifies certain characteristics of the oil of sweet orange, <i>Citrus sinensis</i> (L.) Osbeck, in order to facilitate assessment of its quality.</p>"

46430,IS,,ISO 3140:2011,"Oil of sweet orange [Citrus sinensis (L.) Osbeck], obtained by physical extraction of the peel",Huile essentielle d'orange douce [Citrus sinensis (L.) Osbeck] obtenue par extraction physique du péricarpe,2011-05-13,4,['71.100.60'],ISO/TC 54,9599,[37542],[74546],"['en','fr','ru']",8,"<p>ISO 3140:2011 specifies certain characteristics of the oil of sweet orange [<i>Citrus sinensis</i> (L.) Osbeck] obtained by physical extraction of the peel, with a view to facilitating the assessment of its quality.</p>"

8308,IS,,ISO 3141:1975,Oil of clove leaf,Huile essentielle de feuilles de giroflier,1975-03-01,1,['71.100.60'],ISO/TC 54,9599,,"[8309,8310]",['en'],1,

8309,IS,,ISO 3141:1986,Oil of clove leaf (Syzygium aromaticum (Linnaeus) Merrill et Perry syn. Eugenia caryophyllus (C. Sprengel) Bullock et Harrison),Huile essentielle de feuilles de giroflier (Syzygium aromaticum (Linnaeus) Merrill et Perry syn. Eugenia caryophyllus (C. Sprengel) Bullock et Harrison),1986-10-02,2,['71.100.60'],ISO/TC 54,9599,[8308],[8310],"['en','fr']",3,

8311,IS,,ISO 3142:1974,Oil of clove bud,Huile essentielle de clous de giroflier,1974-08-01,1,['71.100.60'],ISO/TC 54,9599,,[8312],"['en','fr']",2,

8313,IS,,ISO 3143:1975,Oil of clove stem,Huile essentielle de griffes de giroflier,1975-03-01,1,['71.100.60'],ISO/TC 54,9599,,[8314],"['en','fr']",1,

8316,IS,,ISO 3145:1974,Rolling bearings — Bearings with spherical outside surface and extended inner ring width — Eccentric locking collars,Roulements — Roulements à surface extérieure sphérique et à bague intérieure large — Bague de blocage excentrique,1974-06-01,1,['21.100.20'],ISO/TC 4,9599,,[17442],"['en','fr']",3,

8317,IS,,ISO 3146:1974,Plastics — Determination of melting temperature of semi-crystalline polymers — Optical method,Matières plastiques — Détermination de la température de fusion de polymères semi-cristallins — Méthode optique,1974-12-01,1,['83.080.01'],ISO/TC 61,9599,,[8318],['en'],2,

8318,IS,,ISO 3146:1985,Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers,Plastiques — Détermination du comportement à la fusion (température de fusion ou plage de température de fusion) des polymères semi-cristallins,1985-12-19,2,['83.080.01'],ISO/TC 61/SC 5,9599,"[8317,5830]",[8319],"['en','fr']",10,

8319,IS,,ISO 3146:2000,Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods,Plastiques — Détermination du comportement à la fusion (température de fusion ou plage de températures de fusion) des polymères semi-cristallins par méthodes du tube capillaire et du microscope polarisant,2000-05-25,3,['83.080.01'],ISO/TC 61/SC 5,9599,[8318],[81833],"['en','fr']",7,

37642,IS,Cor,ISO 3146:2000/Cor 1:2002,Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods — Technical Corrigendum 1,Plastiques — Détermination du comportement à la fusion (température de fusion ou plage de températures de fusion) des polymères semi-cristallins par méthodes du tube capillaire et du microscope polarisant — Rectificatif technique 1,2002-11-12,3,['83.080.01'],ISO/TC 61/SC 5,9599,,[81833],"['en','fr']",1,

8325,IS,,ISO 3154:1976,Stranded wire ropes for mine hoisting — Technical delivery requirements,Câbles d'extraction toronnés utilisés dans les mines — Conditions techniques de réception,1976-08-01,1,['73.100.40'],ISO/TC 82,9599,,[8326],"['en','fr']",11,

8329,IS,,ISO 3157:1975,Radioluminescence for time measurement instruments — Specifications,Radioluminescence pour les instruments horaires — Spécifications,1975-05-01,1,['39.040.01'],ISO/TC 114/SC 5,9599,,[8330],"['en','fr']",4,

8332,IS,,ISO 3159:1976,Timekeeping instruments — Wrist-chronometers with spring balance oscillator,Instruments horaires — Chronomètres-bracelet à oscillateur balancier-spiral,1976-02-01,1,['39.040.10'],ISO/TC 114,9599,,[54804],"['en','fr']",3,"<p>Lays down the definition of the term 'chronometer', describing the categoeries, the test programme and the acceptable minimum requirements for wrist-chronometers. Wristwatches using a tuning fork oscillator are subjected to these tests pending the availability of separate standards.</p>"

8334,IS,,ISO 3160-1:1982,Watch cases and accessories — Gold alloy coverings — Part 1: General requirements,Boîtes de montres et leurs accessoires — Revêtements d'alliage d'or — Partie 1: Exigences générales,1982-12-01,1,['39.040.10'],ISO/TC 114/SC 6,9599,[8333],[8335],"['en','fr']",2,

8335,IS,,ISO 3160-1:1995,Watch cases and accessories — Gold alloy coverings — Part 1: General requirements,Boîtes de montres et leurs accessoires — Revêtements d'alliage d'or — Partie 1: Exigences générales,1995-02-16,2,['39.040.10'],ISO/TC 114/SC 6,9599,[8334],[27232],"['en','fr']",2,

8333,IS,,ISO 3160:1975,Withdrawal of ISO 3160-1975,Annulation de l'ISO 3160-1975,1975-04-01,1,['39.040.10'],ISO/TC 114/SC 6,9599,,[8334],['en'],2,

8336,IS,,ISO 3160-2:1982,"Watch cases and accessories — Gold alloy coverings — Part 2: Determination of fineness, thickness and corrosion resistance","Boîtes de montres et leurs accessoires — Revêtements d'alliage d'or — Partie 2: Détermination du titre, de l'épaisseur et de la résistance à la corrosion",1982-12-01,1,['39.040.10'],ISO/TC 114/SC 6,9599,,[8337],"['en','fr']",6,

8337,IS,,ISO 3160-2:1992,"Watch cases and accessories — Gold alloy coverings — Part 2: Determination of fineness, thickness, corrosion resistance and adhesion","Boîtes de montres et leurs accessoires — Revêtements d'alliage d'or — Partie 2: Détermination du titre, de l'épaisseur, de la résistance à la corrosion et de l'adhérence",1992-12-10,2,['39.040.10'],ISO/TC 114/SC 6,9599,[8336],[31209],"['en','fr']",9,"<p>The test methods described apply to all gold alloy coverings specified in ISO 3160-1 on watch cases and accessories, including bracelets when they are permanently attached to the case. The tests apply only to significant surfaces.</p>"

31209,IS,,ISO 3160-2:2003,"Watch-cases and accessories — Gold alloy coverings — Part 2: Determination of fineness, thickness, corrosion resistance and adhesion","Boîtes de montres et leurs accessoires — Revêtements d'alliage d'or — Partie 2: Détermination du titre, de l'épaisseur, de la résistance à la corrosion et de l'adhérence",2003-02-12,3,['39.040.10'],ISO/TC 114/SC 6,9599,[8337],[66162],"['en','fr']",12,"<p>ISO 3160-2:2003 specifies methods to determine fineness, thickness, corrosion resistance and adhesion for gold alloy coverings on watch-cases and accessories, including bracelets when they are permanently attached to the case.</p><p>The tests apply only to significant surfaces.</p><

8338,IS,,ISO 3160-3:1993,Watch cases and accessories — Gold alloy coverings — Part 3: Abrasion resistance tests of a type of coating on standard gauges,Boîtes de montres et leurs accessoires — Revêtements d'alliage d'or — Partie 3: Essais de résistance à l'abrasion d'un type de revêtement sur éprouvettes normalisées,1993-04-08,1,['39.040.10'],ISO/TC 114/SC 6,9599,,[45522],"['en','fr']",4,"<p>Specifies two test methods and describes dimensions and characteristics of the standard gauge, standard coating, test methods, determination of wear, and qualitative comparison scales.</p>"

8339,IS,,ISO 3161:1977,"UNJ threads, with controlled root radius, for aerospace — Inch series","Filetages UNJ, avec rayon à fond de filet contrôlé, pour applications aérospatiales — Série en inches",1977-02-01,1,['49.030.10'],ISO/TC 20/SC 4,9599,,[8340],"['en','fr']",43,

8340,IS,,ISO 3161:1996,"Aerospace — UNJ threads, with controlled root radius, for aerospace — Inch series","Aéronautique et espace — Filetage UNJ, avec rayon à fond de filet contrôlé, pour applications aérospatiales — Série en inches",1996-02-01,2,['49.030.10'],ISO/TC 20/SC 4,9599,[8339],[30510],"['en','fr']",36,

8343,IS,,ISO 3164:1979,Earth-moving machinery — Laboratory evaluations of roll-over and falling-object protective structures — Specifications for the deflection-limiting volume,Engins de terrassement — Études en laboratoire des structures de protection au retournement et contre les chutes d'objets — Spécifications pour le volume limite de déformation,1979-11-01,3,['53.100'],ISO/TC 127/SC 2,9599,,[8344],"['en','fr']",4,

8345,IS,Amd,ISO 3164:1979/Amd 1:1980,Earth-moving machinery — Laboratory evaluations of roll-over and falling-object protective structures — Specifications for the deflection-limiting volume — Amendment 1,Engins de terrassement — Études en laboratoire des structures de protection au retournement et contre les chutes d'objets — Spécifications pour le volume limite de déformation — Amendement 1,1980-12-01,3,['53.100'],ISO/TC 127/SC 2,9599,,[8344],['en'],1,

8344,IS,,ISO 3164:1992,Earth-moving machinery — Laboratory evaluations of roll-over and falling-object protective structures — Specifications for deflection-limiting volume,Engins de terrassement — Étude en laboratoire des structures de protection au retournement et contre les chutes d'objets — Spécifications pour le volume limite de déformation,1992-07-16,4,['53.100'],ISO/TC 127/SC 2,9599,"[8343,8345]",[22182],"['en','fr']",3,

22182,IS,,ISO 3164:1995,Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume,Engins de terrassement — Étude en laboratoire des structures de protection — Spécifications pour le volume limite de déformation,1995-11-09,5,['53.100'],ISO/TC 127/SC 2,9599,[8344],"[32907,57232]","['en','fr']",3,<p>Specifies the deflection-limiting volume (DLV) to be used when performing laboratory evaluations of protective structures which provide protection to operators of earth-moving machinery.</p>

24591,IS,,ISO 3166-1:1997,Codes for the representation of names of countries and their subdivisions — Part 1: Country codes,Codes pour la représentation des noms de pays et de leurs subdivisions — Partie 1: Codes pays,1997-09-25,1,['01.140.30'],ISO/TC 46,9599,[22748],[39719],"['en','fr']",58,

39719,IS,,ISO 3166-1:2006,Codes for the representation of names of countries and their subdivisions — Part 1: Country codes,Codes pour la représentation des noms de pays et de leurs subdivisions — Partie 1: Codes de pays,2006-11-20,2,['01.140.30'],ISO/TC 46,9599,[24591],[63545],"['en','fr','ru']",69,<p>ISO 3166-1:2006 is intended for use in any application requiring the expression of current country names in coded form; it also includes basic guidelines for its implementation and maintenance.</p

46123,IS,Cor,ISO 3166-1:2006/Cor 1:2007,Codes for the representation of names of countries and their subdivisions — Part 1: Country codes — Technical Corrigendum 1,Codes pour la représentation des noms de pays et de leurs subdivisions — Partie 1: Codes de pays — Rectificatif technique 1,2007-07-11,2,['01.140.30'],ISO/TC 46,9599,,[63545],"['en','fr']",3,

63545,IS,,ISO 3166-1:2013,Codes for the representation of names of countries and their subdivisions — Part 1: Country codes,Codes pour la représentation des noms de pays et de leurs subdivisions — Partie 1: Codes de pays,2013-11-19,3,['01.140.30'],ISO/TC 46,9599,"[46123,39719]",[72482],"['en','fr']",72,<p>ISO 3166-1:2013 is intended for use in any application requiring the expression of current country names in coded form; it also includes basic guidelines for its implementation and maintenance.

8347,IS,,ISO 3166:1981,Codes for the representation of names of countries,Codes pour la représentation des noms de pays,1981-05-01,2,['01.140.30'],ISO/TC 46,9599,,[8348],"['en','fr']",49,

8348,IS,,ISO 3166:1988,Codes for the representation of names of countries,Codes pour la représentation des noms de pays,1988-08-18,3,['01.140.30'],ISO/TC 46,9599,[8347],[22748],"['en','fr']",53,

22748,IS,,ISO 3166:1993,Codes for the representation of names of countries,Codes pour la représentation des noms de pays,1993-12-23,4,['01.140.30'],ISO/TC 46,9599,[8348],[24591],"['en','fr']",30,

8349,IS,,ISO 3166-2:1998,Codes for the representation of names of countries and their subdivisions — Part 2: Country subdivision code,Codes pour la représentation des noms de pays et de leurs subdivisions — Partie 2: Code pour les subdivisions de pays,1998-12-20,1,['01.140.30'],ISO/TC 46,9599,,[39718],"['en','fr']",105,

39718,IS,,ISO 3166-2:2007,Codes for the representation of names of countries and their subdivisions — Part 2: Country subdivision code,Codes pour la représentation des noms de pays et de leurs subdivisions — Partie 2: Code pour les subdivisions de pays,2007-12-13,2,['01.140.30'],ISO/TC 46,9599,[8349],[63546],"['en','fr']",144,"<p>ISO 3166-2:2007 establishes a universally applicable code for the representation of the names of principal administrative divisions of countries and territories included in ISO 3166-1. It is intended to be used in conjunction with ISO 3166-1.</p><p>ISO 3166-2:2007 provides the structure for a code for the representation of names of principal administrative divisions

63546,IS,,ISO 3166-2:2013,Codes for the representation of names of countries and their subdivisions — Part 2: Country subdivision code,Codes pour la représentation des noms de pays et de leurs subdivisions — Partie 2: Code pour les subdivisions de pays,2013-11-19,3,['01.140.30'],ISO/TC 46,9599,[39718],[72483],"['en','fr']",192,"<p>ISO 3166-2:2013 establishes a universally applicable code for the representation of the names of principal administrative divisions of countries and territories included in ISO 3166-1. It is intended to be used in conjunction with ISO 3166-1.</p><p>Clauses 4 to 7 of ISO 3166-2:2013 provide the structure for a code for the representation of names of principal admini

2130,IS,,ISO 3166-3:1999,Codes for the representation of names of countries and their subdivisions — Part 3: Code for formerly used names of countries,Codes pour la représentation des noms de pays et de leurs subdivisions — Partie 3: Code pour les noms de pays antérieurement utilisés,1999-03-11,1,['01.140.30'],ISO/TC 46,9599,,[63547],"['en','fr']",11,

63547,IS,,ISO 3166-3:2013,Codes for the representation of names of countries and their subdivisions — Part 3: Code for formerly used names of countries,Codes pour la représentation des noms de pays et de leurs subdivisions — Partie 3: Code pour les noms de pays antérieurement utilisés,2013-11-19,2,['01.140.30'],ISO/TC 46,9599,[2130],[72484],"['en','fr']",12,"<p>ISO 3166-3:2013 provides principles and maintenance arrangements of a code for the representation of country names removed from editions 1 to 7 of ISO 3166 and the subsequent editions of ISO 3166-1.</p><p>Clauses 8 and 9 contain lists of all formerly used country names removed from ISO 3166 (now ISO 3166‑1) since 1974, together with t

8350,IS,,ISO 3167:1983,Plastics — Preparation and use of multipurpose test specimens,Plastiques — Préparation et utilisation d'éprouvettes à usages multiples,1983-11-01,2,['83.080.01'],ISO/TC 61,9599,,[8351],"['en','fr']",3,

8351,IS,,ISO 3167:1993,Plastics — Multipurpose test specimens,Plastiques — Éprouvettes à usages multiples,1993-06-10,3,['83.080.01'],ISO/TC 61/SC 2,9599,[8350],[31272],"['en','fr']",5,"<p>Specifies requirements relating to multipurpose test specimens (i.e. specimens of type A and B being tensile test specimens only, from which, however, with simple machining, specimens for a variety of other tests can be taken allowing all the test methods mentioned in annex A to be carried out on the basis of comparable mouldings) for plastic moulding materials intended for processing by injection or direct compression moulding.</p>"

31272,IS,,ISO 3167:2002,Plastics — Multipurpose test specimens,Plastiques — Éprouvettes à usages multiples,2002-03-07,4,['83.080.01'],ISO/TC 61/SC 2,9599,[8351],[65105],"['en','fr']",9,