Withdrawn and superseded ISO standards — page 98 of 246

4245,IS,,ISO 307:1994,Plastics — Polyamides — Determination of viscosity number,Plastiques — Polyamides — Détermination de l'indice de viscosité,1994-08-18,3,['83.080.20'],ISO/TC 61/SC 9,9599,"[4244,4243]",[31278],"['en','fr']",14,"<p>Cancels and replaces the second edition (1984). Specifies a method for the determination of the viscosity number of dilute solutions of polyamides in certain specified solvents that is applicable to polyamides as defined in ISO 1874-1, as well as to copolyamides and other polyamides that are soluble in one of the specified solvents under the specified conditions. Not applicable to polyamides produced by anionic polymerization of lactams or produced with crossli

31278,IS,,ISO 307:2003,Plastics — Polyamides — Determination of viscosity number,Plastiques — Polyamides — Détermination de l'indice de viscosité,2003-08-19,4,['83.080.20'],ISO/TC 61/SC 9,9599,[4245],[37361],"['en','fr']",21,"<p>ISO 307:2003 specifies a method for the determination of the viscosity number (also referred to as reduced viscosity) of dilute solutions of polyamides in certain specified solvents.</p><p>The method is applicable to the polyamides designated PA 46, PA 6, PA 66, PA 69, PA 610, PA 612, PA 11, PA 12, PA 6T/66 and PA MXD6 as defined in ISO 1874-1, as well as to copolyamides and other polyamides that are soluble in one of the specified solvents under the specified condit

37361,IS,,ISO 307:2007,Plastics — Polyamides — Determination of viscosity number,Plastiques — Polyamides — Détermination de l'indice de viscosité,2007-05-15,5,['83.080.20'],ISO/TC 61/SC 9,9599,[31278],[70409],"['en','fr']",33,"<p>ISO 307:2007 specifies a method for the determination of the viscosity number of dilute solutions of polyamides in certain specified solvents. </p><p>For pure polyamides or polyamides containing additives that do not interfere with the viscosity measurement, the determination of the viscosity number of a polyamide provides a measure of the molecular mass of the polymer. The viscosity number of pure polyamides or polyamides which contain additives that do not interfe

60408,IS,Amd,ISO 307:2007/Amd 1:2013,"Plastics — Polyamides — Determination of viscosity number — Amendment 1: Corrections, and update to reference to JIS K 6920-2","Plastiques — Polyamides — Détermination de l'indice de viscosité — Amendement 1: Corrections, et mise à jour de la référence à la norme JIS K 6920-2",2013-03-20,5,['83.080.20'],ISO/TC 61/SC 9,9599,,[70409],"['en','fr']",2,

8185,IS,,ISO 3070-0:1982,Acceptance conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 0: General introduction,"Conditions de réception des machines à aléser et à fraiser, à broche horizontale — Contrôle de la précision — Partie 0: Introduction générale",1982-11-01,2,['25.080.20'],ISO/TC 39/SC 2,9599,,"[40185,37686,37684]","['en','fr']",5,"<p>This part defines the machining operations that can be carried out an these machine tools. Describes the different types of machines: planer type machines, and movable column machines or floor type machines. Gives the terminology for the main elements of the machine (in English, French and Russian as well

8186,IS,,ISO 3070-1:1975,Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 1: Table type machines,"Conditions d'essais des machines à aléser et à fraiser, à broche horizontale — Contrôle de la précision — Partie 1: Machines à montant fixe",1975-02-01,1,['25.080.20'],ISO/TC 39,9599,,[8187],"['en','fr']",21,

8188,IS,Add,ISO 3070-1:1975/Add 1:1976,Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 1: Table type machines — Addendum 1,"Conditions d'essais des machines à aléser et à fraiser, à broche horizontale — Contrôle de la précision — Partie 1: Machines à montant fixe — Additif 1",1976-08-01,1,['25.080.20'],ISO/TC 39,9599,,[8189],['en'],7,

8187,IS,,ISO 3070-1:1987,Acceptance conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 1: Table-type machines,"Conditions de réception des machines à aléser et à fraiser, à broche horizontale — Contrôle de la précision — Partie 1: Machines à montant fixe",1987-06-18,2,['25.080.20'],ISO/TC 39/SC 2,9599,[8186],[24673],"['en','fr']",25,

8190,IS,,ISO 3070-2:1978,Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 2: Floor type machines,Conditions d'essai des machines à aléser et à fraiser à broche horizontale — Contrôle de la précision — Partie 2: Machines de grandes dimensions,1978-03-01,1,['25.080.20'],ISO/TC 39,9599,,[8191],"['en','fr']",27,

24673,IS,,ISO 3070-2:1997,Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 2: Table-type machines,"Conditions d'essai des machines à aléser et à fraiser, à broche horizontale — Contrôle de la précision — Partie 2: Machines à montant fixe",1997-07-17,2,['25.080.20'],ISO/TC 39/SC 2,9599,[8187],[37684],"['en','fr']",41,

37686,IS,,ISO 3070-2:2007,Machine tools — Test conditions for testing the accuracy of boring and milling machines with horizontal spindle — Part 2: Machines with movable column and fixed table,Machines-outils — Conditions d'essai pour le contrôle de l'exactitude des machines à aléser et à fraiser à broche horizontale — Partie 2: Machines à montant mobile et à table fixe,2007-12-10,3,['25.080.20'],ISO/TC 39/SC 2,9599,"[8191,8185]",[60887],"['en','fr']",53,"<p>ISO 3070-2:2007 specifies, with reference to ISO 230-1 and ISO 230-2, geometric tests, machining tests and tests for checking the accuracy and repeatability of positioning by numerical control of general purpose, normal accuracy, horizon

8191,IS,,ISO 3070-3:1997,"Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 3: Floor type machines with detached, stationary work-holding table","Conditions d'essai des machines à aléser et à fraiser, à broche horizontale — Contrôle de la précision — Partie 3: Machines à montant mobile, à taque porte-pièce indépendante",1997-12-25,2,['25.080.20'],ISO/TC 39/SC 2,9599,[8190],[37686],"['en','fr']",38,

24672,IS,,ISO 3070-4:1998,Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 4: Planer type machines with movable column,"Conditions d'essai des machines à aléser et à fraiser, à broche horizontale — Contrôle de la précision — Partie 4: Machines à montant mobile et bancs en croix",1998-03-26,2,['25.080.20'],ISO/TC 39/SC 2,9599,,[40185],"['en','fr']",41,

8193,IS,,ISO 3071:1980,Textiles — Determination of pH of the aqueous extract,Textiles — Détermination du pH de l'extrait aqueux,1980-10-01,2,['59.080.01'],ISO/TC 38,9599,,[35252],"['en','fr']",3,"<p>Applicable to textiles in any form (fibres, yarns, fabrics, etc.), provided that a small representative sample may be obtained which is in, or may be reduced to, a form which permits a ready exchange of liquid between the interior of the material and the water used in preparing the extract.</p>"

35252,IS,,ISO 3071:2005,Textiles — Determination of pH of aqueous extract,Textiles — Détermination du pH de l'extrait aqueux,2005-07-13,3,['59.080.01'],ISO/TC 38,9599,[8193],[74203],"['en','fr']",4,<p>ISO 3071:2005 specifies a method for determining the pH of the aqueous extract of textiles. The method is applicable to textiles in any form.</p>

8196,IS,,ISO 3074:1975,Wool — Determination of dichloromethane-soluble matter in combed sliver,Laine — Détermination de l'extrait dichlorométhanique dans un ruban de peigné,1975-12-01,1,['59.080.01'],ISO/TC 38/SC 23,9599,,[61784],"['en','fr']",3,"<p>Wool textiles may contain solvent-extractable oils and fats. The amount of these substances present depends on the stage of manufacture, and its estimation is important for determining the clean wool content of a sample. The method is only applicable to 100 % wool products. It may give misleading results if applied to products in which fibres other than wool are present.</p>"

8197,IS,,ISO 3075:1980,"Short link chain for lifting purposes — Grade S (6) non calibrated, for chain slings etc.","Chaînes de levage à maillons courts — Classe S (6), non calibrées, pour élingues à chaînes, etc.",1980-08-01,1,['53.020.30'],ISO/TC 111/SC 1,9599,,[8198],"['en','fr']",8,"<p>Specifies the requirements for lifting chains, grade S (6), non-calibrated, for use on cranes, in chain slings and for general lifting purposes. These are electrically welded round steel short link chains, fully heat treated and tested complying with ISO 1834. The range of sizes covered is from 5 to 45 mm. The annex gives a range of temporary additional sizes 6 to 30 mm.</p>"

8199,IS,,ISO 3076:1980,"Short link chains for lifting purposes — Grade T (8), non-calibrated, for chain slings, etc.","Chaînes de levage à maillons courts, Classe T (8), non calibrées, pour élingues à chaînes, etc.",1980-08-01,1,['53.020.30'],ISO/TC 111,9599,,[8200],"['en','fr']",9,

8200,IS,,ISO 3076:1984,"Short link chain for lifting purposes — Grade T (8), non-calibrated, for chain slings etc.","Chaînes de levage à maillons courts, classe T (8), non calibrées, pour élingues à chaînes, etc.",1984-07-01,2,['53.020.30'],ISO/TC 111/SC 1,9599,[8199],"[8201,34498]","['en','fr']",9,"<p>This second edition, which cancels and replaces ISO 3077:1980, incorporates draft Amendment 1. Specifies the requirements for lifting chains, grade T (8), non-calibrated, for use on cranes, in chain slings and for general lifting purposes. These are electrically welded round steel short link chains, fully heat treated and tested complying with ISO 1834. The range of sizes covered is from 5 to

8202,IS,,ISO 3077:1980,"Short link chain for lifting purposes — Grade T (8), calibrated, for chain hoists and other lifting appliances","Chaînes de levage à maillons courts, classe T (8), calibrées, pour palans à chaînes et autres appareils de levage",1980-08-01,1,['53.020.30'],ISO/TC 111,9599,,[8203],"['en','fr']",9,

8203,IS,,ISO 3077:1984,"Short link chain for lifting purposes — Grade T (8), calibrated, for chain hoists and other lifting appliances","Chaînes de levage à maillons courts, classe T (8), calibrées, pour palans à chaînes et autres appareils de levage",1984-07-01,2,['53.020.30'],ISO/TC 111/SC 1,9599,[8202],"[8204,33229]","['en','fr']",9,"<p>This second edition, which cancels and replaces ISO 3077:1980, incorporates draft Amendment 1. Specifies the requirements for lifting chains, grade T (8), accurately calibrated, for use as load chain in chain hoists and similar appliances. These are electrically welded round steel short link chains, fully heat treated and tested complying with ISO 1834. Th

8205,IS,,ISO 3078:1974,Shipbuilding — Cargo winches,Construction navale — Treuils de charge,1974-04-01,1,['47.020.40'],ISO/TC 8/SC 4,9599,,[8206],"['en','fr']",4,

8206,IS,,ISO 3078:1987,Shipbuilding — Cargo winches,Construction navale — Treuils de charge,1987-05-21,2,['47.020.40'],ISO/TC 8/SC 4,9599,[8205],[65511],"['en','fr']",4,"<p>Specifies the characteristics of cargo winches on cargo derricks, especially winches with electric or hydraulic drive.</p>"

4246,IS,,ISO 308:1981,Plastics — Phenolic moulding materials — Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state),Plastiques — Matières à mouler à base de phénoplastes — Détermination des matières solubles dans l'acétone (teneur apparente en résine des matières à l'état non moulé),1981-11-01,2,['83.080.10'],ISO/TC 61/SC 12,9599,,[22998],"['en','fr']",2,

8209,IS,,ISO 3081:1986,Iron ores — Increment sampling — Manual method,Minerais de fer — Échantillonnage par prélèvements — Méthode manuelle,1986-05-08,2,['73.060.10'],ISO/TC 102/SC 1,9599,,[8211],"['en','fr']",12,

8210,IS,,ISO 3082:1987,Iron ores — Increment sampling and sample preparation — Mechanical method,Minerais de fer — Échantillonnage par prélèvements et préparation des échantillons — Méthode mécanique,1987-05-21,1,['73.060.10'],ISO/TC 102/SC 1,9599,,[8211],"['en','fr']",39,

8211,IS,,ISO 3082:1998,Iron ores — Sampling and sample preparation procedures,Minerais de fer — Procédures d'échantillonnage et de préparation des échantillons,1998-08-13,2,['73.060.10'],ISO/TC 102/SC 1,9599,"[8209,8213,8210]",[34366],['en'],67,

34366,IS,,ISO 3082:2000,Iron ores — Sampling and sample preparation procedures,Minerais de fer — Procédures d'échantillonnage et de préparation des échantillons,2000-12-21,3,['73.060.10'],ISO/TC 102/SC 1,9599,"[31660,8211]",[43285],['en'],67,

43285,IS,,ISO 3082:2009,Iron ores — Sampling and sample preparation procedures,Minerais de fer — Procédures d'échantillonnage et de préparation des échantillons,2009-05-26,4,['73.060.10'],ISO/TC 102/SC 1,9599,"[34366,18872]",[66457],['en'],81,"<p>ISO 3082:2009 gives</p><p>a) the underlying theory,</p><p>b) the basic principles for sampling and preparation of samples, and</p><p>c) the basic requirements for the design, installation and operation of sampling systems</p><p>for mechanical sampling, manual sampling and preparation of samples taken from a lot under transfer, to determine the chemical composition, moisture content, size distribution and other physical and metallurgical propertie

54923,IS,Cor,ISO 3082:2009/Cor 1:2009,Iron ores — Sampling and sample preparation procedures — Technical Corrigendum 1,Minerais de fer — Procédures d'échantillonnage et de préparation des échantillons — Rectificatif technique 1,2009-08-14,4,['73.060.10'],ISO/TC 102/SC 1,9599,,[66457],['en'],1,

8213,IS,,ISO 3083:1986,Iron ores — Preparation of samples — Manual method,Minerais de fer — Préparation des échantillons — Méthode manuelle,1986-10-23,2,['73.060.10'],ISO/TC 102/SC 1,9599,,[8211],"['en','fr']",16,

8214,IS,,ISO 3084:1975,Iron ores — Experimental methods for evaluation of quality variation,Minerais de fer — Méthodes expérimentales d'évaluation de la variation de qualité,1975-09-01,1,['73.060.10'],ISO/TC 102/SC 1,9599,,[8215],"['en','fr']",12,

8215,IS,,ISO 3084:1986,Iron ores — Experimental methods for evaluation of quality variation,Minerais de fer — Méthodes expérimentales d'évaluation de la variation de qualité,1986-11-20,2,['73.060.10'],ISO/TC 102/SC 1,9599,[8214],[8216],"['en','fr']",11,

8217,IS,,ISO 3085:1975,Iron ores — Experimental methods for checking the precision of sampling,Minerais de fer — Méthodes expérimentales de contrôle de la fidélité de l'échantillonnage,1975-11-01,1,['73.060.10'],ISO/TC 102/SC 1,9599,,[8218],"['en','fr']",13,

8218,IS,,ISO 3085:1986,Iron ores — Experimental methods for checking the precision of sampling,Minerais de fer — Méthodes expérimentales de contrôle de la fidélité de l'échantillonnage,1986-11-20,2,['73.060.10'],ISO/TC 102/SC 1,9599,[8217],[20682],"['en','fr']",13,

20682,IS,,ISO 3085:1996,Iron ores — Experimental methods for checking the precision of sampling,Minerais de fer — Méthodes expérimentales de contrôle de la fidélité de l'échantillonnage,1996-07-04,3,['73.060.10'],ISO/TC 102/SC 1,9599,[8218],[32136],"['en','fr']",17,

32136,IS,,ISO 3085:2002,"Iron ores — Experimental methods for checking the precision of sampling, sample preparation and measurement","Minerais de fer — Méthodes expérimentales de contrôle de la fidélité de l'échantillonnage, de préparation des échantillons et de mesurage",2002-03-21,4,['73.060.10'],ISO/TC 102/SC 1,9599,[20682],[72160],['en'],21,

8220,IS,,ISO 3086:1974,Iron ores — Experimental methods for checking the bias of sampling,Minerais de fer — Méthodes expérimentales de contrôle de l'erreur systématique d'échantillonnage,1974-04-01,1,['73.060.10'],ISO/TC 102/SC 1,9599,,[8221],"['en','fr']",3,

8221,IS,,ISO 3086:1986,Iron ores — Experimental methods for checking the bias of sampling,Minerais de fer — Méthodes expérimentales de contrôle de l'erreur systématique d'échantillonnage,1986-12-18,2,['73.060.10'],ISO/TC 102/SC 1,9599,[8220],[8222],"['en','fr']",6,

8222,IS,,ISO 3086:1998,Iron ores — Experimental methods for checking the bias of sampling,Minerais de fer — Méthodes expérimentales de contrôle de l'erreur systématique d'échantillonnage,1998-02-19,3,['73.060.10'],ISO/TC 102/SC 1,9599,[8221],[34679],['en'],12,

8223,IS,,ISO 3087:1974,Iron ores — Determination of moisture content,Minerais de fer — Détermination de l'humidité,1974-04-01,1,['73.060.10'],ISO/TC 102/SC 1,9599,,[8224],"['en','fr']",8,

8224,IS,,ISO 3087:1987,Iron ores — Determination of moisture content of a consignment,Minerais de fer — Détermination de l'humidité d'une livraison,1987-04-09,2,['73.060.10'],ISO/TC 102/SC 1,9599,[8223],[21490],"['en','fr']",12,

21490,IS,,ISO 3087:1998,Iron ores — Determination of moisture content of a lot,Minerais de fer — Détermination de l'humidité d'un lot,1998-12-20,3,['73.060.10'],ISO/TC 102/SC 1,9599,[8224],[51476],['en'],16,

51476,IS,,ISO 3087:2011,Iron ores — Determination of the moisture content of a lot,Minerais de fer — Détermination de l'humidité d'un lot,2011-09-30,4,['73.060.10'],ISO/TC 102/SC 1,9599,[21490],[72159],"['en','ru']",18,"<p>This International Standard specifies a method for the determination of the moisture content of a lot of iron ore.</p><p>This method is applicable to all iron ores, whether natural or processed.</p>"

8225,IS,,ISO 3088:1975,Welding requirements — Factors to be considered in specifying requirements for fusion welded joints in steel (technical influencing factors),Exigences relatives au soudage — Paramètres à prendre en considération pour définir les exigences auxquelles doivent satisfaire les joints soudés par fusion sur acier (facteur d'influence d'ordre technique),1975-05-01,1,['25.160.40'],ISO/TC 44/SC 10,9599,,[25462],"['en','fr']",3,"<p>The conditions of use determine the service requirements of a joint. The influencing factors, parameters and manufacturing conditions listed in this document indicate those aspects which have to be taken into account to ensure the probable behaviour of

8226,IS,,ISO 3089:1974,"Self centring, manually operated chucks for machine tools — Normal accuracy — Acceptance test specifications (geometrical tests)","Mandrins pour machines-outils, à serrage concentrique et à commande manuelle, d'usage courant — Conditions de réception (vérifications geométriques)",1974-02-01,1,['25.060.20'],ISO/TC 39/SC 8,9599,,[8227],['en'],4,

8227,IS,,ISO 3089:1991,Self-centring manually-operated chucks for machine tools — Acceptance test specifications (geometrical tests),"Mandrins pour machines-outils, à serrage concentrique et à commande manuelle — Conditions de réception (vérifications géométriques)",1991-10-17,2,['25.060.20'],ISO/TC 39/SC 8,9599,[8226],[33838],"['en','fr']",7,<p>Describes the tests and the corresponding permissible deviations of two classes of accuracy. This second edition cancels and replaces the first edition (1974).</p>

8232,IS,,ISO 3093:1982,Cereals — Determination of falling number,Céréales — Détermination de l'indice de chute,1982-02-01,2,['67.060'],ISO/TC 34/SC 4,9599,,"[39483,27890]","['en','fr']",5,"<p>The result of the determination is a measure of alpha-amylase activity. The method consists in rapid gelatinization of a suspension of flour or of the whole milled product in water, in a boiling water bath, and subsequent measurement of the liquefaction by alpha-amylase of the starch contained inthe sample.</p>"

39483,IS,,ISO 3093:2004,"Wheat, rye and respective flours, durum wheat and durum wheat semolina — Determination of the Falling Number according to Hagberg-Perten","Blés tendres, seigles et leurs farines, blés durs et leurs semoules — Détermination de l'Indice de Chute selon Hagberg-Perten",2004-07-27,3,['67.060'],ISO/TC 34/SC 4,9599,[8232],[54114],"['en','fr']",13,"<p>ISO 3093:2004 describes the determination of the alpha-amylase activity of cereals by the Falling Number method according to Hagberg-Perten.</p><p>This method is applicable to cereal grains, in particular to wheat and rye and their respective flours, durum wheat and its semolina. For the purposes of ISO 3093:2004, the term 'flo

51191,IS,Cor,ISO 3093:2004/Cor 1:2008,"Wheat, rye and respective flours, durum wheat and durum wheat semolina — Determination of the Falling Number according to Hagberg-Perten — Technical Corrigendum 1","Blés tendres, seigles et leurs farines, blés durs et leurs semoules — Détermination de l'Indice de Chute selon Hagberg-Perten — Rectificatif technique 1",2008-04-15,3,['67.060'],ISO/TC 34/SC 4,9599,,[54114],"['en','fr']",1,

8233,IS,,ISO 3094:1974,Fruit and vegetable products — Determination of copper content — Photometric method,Produits dérivés des fruits et légumes — Dosage du cuivre — Méthode photométrique,1974-12-01,1,['67.080.01'],ISO/TC 34/SC 3,9599,,[8234],"['en','fr']",2,

8235,IS,,ISO 3095:1975,Acoustics — Measurement of noise emitted by railbound vehicles,Acoustique — Mesurage du bruit émis par les véhicules circulant sur rails,1975-09-01,1,"['17.140.30','45.020']",ISO/TC 43,9599,,"[41669,1530]","['en','fr']",6,"<p>Specifies the conditions for obtaining reproducible and comparable measurements of the noise level and the noise spectrum. In the annex specifications for exhaust or air-intake noise measurement and measurements with stationary and accelerating vehicles and measurements at stations, on bridges or viaducts and in tunnels are given.</p>"

41669,IS,,ISO 3095:2005,Railway applications — Acoustics — Measurement of noise emitted by railbound vehicles,Applications ferroviaires — Acoustique — Mesurage du bruit émis par les véhicules circulant sur rails,2005-08-30,2,"['17.140.30','45.020']",ISO/TC 43/SC 1,9599,[8235],[55726],"['en','fr']",31,"<p>ISO 3095:2005 specifies the conditions for obtaining reproducible and comparable measurement results of levels and spectra of noise emitted by all kinds of vehicles operating on rails or other types of fixed track, except for track maintenance vehicles in operation.</p><p>It is applicable to type testing and periodic monitoring testing.</p><p>The results may be used, for example, to characte

55726,IS,,ISO 3095:2013,Acoustics — Railway applications — Measurement of noise emitted by railbound vehicles,Acoustique — Applications ferroviaires — Mesurage du bruit émis par les véhicules circulant sur rails,2013-07-24,3,"['17.140.30','45.020']",ISO/TC 43/SC 1,9599,[41669],[77367],"['en','fr']",53,"<p>ISO 3095:2013 specifies measurement methods and conditions to obtain reproducible and comparable exterior noise emission levels and spectra for all kinds of vehicles operating on rails or other types of fixed track, hereinafter conventionally called 'unit'.</p><p>ISO 3095:2013 is applicable to type testing of units. It does not include all the instructions to characterize the noise emissio

8236,IS,,ISO 3096:1974,Needle roller bearings — Needle rollers — Dimensions — Metric series,Roulements à aiguilles — Aiguilles — Dimensions — Série métrique,1974-04-01,1,['21.100.20'],ISO/TC 4/SC 5,9599,,[20526],"['en','fr']",1,

20526,IS,,ISO 3096:1996,Rolling bearings — Needle rollers — Dimensions and tolerances,Roulements — Aiguilles — Dimensions et tolérances,1996-12-19,2,['21.100.20'],ISO/TC 4/SC 5,9599,"[8236,12452]","[67519,50187]","['en','fr']",5,<p>Specifies dimensions and tolerances for finished steel needle rollers used as rolling elements in rolling bearings. Replaces the first edition.</p>

32435,IS,Cor,ISO 3096:1996/Cor 1:1999,Rolling bearings — Needle rollers — Dimensions and tolerances — Technical Corrigendum 1,Roulements — Aiguilles — Dimensions et tolérances — Rectificatif technique 1,1999-08-05,2,['21.100.20'],ISO/TC 4/SC 5,9599,,"[67519,50187]","['en','fr']",1,

24792,IS,,ISO 3098-0:1997,Technical product documentation — Lettering — Part 0: General requirements,Documentation technique de produits — Écriture — Partie 0: Prescriptions générales,1997-12-11,1,['01.100.01'],ISO/TC 10/SC 1,9599,,[65679],"['en','fr']",9,

8238,IS,,ISO 3098-1:1974,Technical drawings — Lettering — Part 1: Currently used characters,Dessins techniques — Écriture — Partie 1: Caractères courants,1974-04-01,1,['01.100.01'],ISO/TC 10,9599,,[33195],"['en','fr']",6,

8240,IS,,ISO 3098-2:1984,Technical drawings — Lettering — Part 2: Greek characters,Dessins techniques — Écriture — Partie 2: Caractères grecs,1984-05-01,1,['01.100.01'],ISO/TC 10/SC 1,9599,,[33197],"['en','fr']",5,

8241,IS,,ISO 3098-3:1987,Technical drawings — Lettering — Part 3: Diacritical and particular marks for the Latin alphabet,Dessins techniques — Écriture — Partie 3: Signes diacritiques et signes particuliers à l'alphabet latin,1987-11-12,1,['01.100.01'],ISO/TC 10/SC 1,9599,,[33200],"['en','fr']",5,

8242,IS,,ISO 3098-4:1984,Technical drawings — Lettering — Part 4: Cyrillic characters,Dessins techniques — Écriture — Partie 4: Caractères cyrilliques,1984-05-01,1,['01.100.01'],ISO/TC 10/SC 1,9599,,[33201],"['en','fr']",5,

3620,IS,,ISO 31-0:1981,"General principles concerning quantities, units and symbols","Principes généraux concernant les grandeurs, les unités et les symboles",1981-07-01,2,['01.060'],ISO/TC 12,9599,,[3621],"['en','fr']",13,

3621,IS,,ISO 31-0:1992,Quantities and units — Part 0: General principles,Grandeurs et unités — Partie 0: Principes généraux,1992-07-23,3,['01.060'],ISO/TC 12,9599,[3620],[30669],"['en','fr']",21,"<p>Gives general information about principles concerning physical quantities, equations, quantity and unit symbols, and coherent unit systems, especially the International System of Units, SI, including recommendations for printing symbols and numbers. Annex A includes a guide to terms used in names for physical quantities, Annex B a guide to the rounding of numbers, Annex C international organizations in the field of quantities and units.</p>"

28988,IS,Amd,ISO 31-0:1992/Amd 1:1998,Quantities and units — Part 0: General principles — Amendment 1,Grandeurs et unités — Partie 0: Principes généraux — Amendement 1,1998-12-20,3,['01.060'],ISO/TC 12,9599,,[30669],"['en','fr']",2,

40910,IS,Amd,ISO 31-0:1992/Amd 2:2005,Quantities and units — Part 0: General principles — Amendment 2,Grandeurs et unités — Partie 0: Principes généraux — Amendement 2,2005-10-05,3,['01.060'],ISO/TC 12,9599,,[30669],"['en','fr']",1,

3622,IS,,ISO 31-1:1978,Quantities and units of space and time,Grandeurs et unités d'espace et de temps,1978-03-01,1,['01.060'],ISO/TC 12,9599,,[3623],['en'],13,

3624,IS,Amd,ISO 31-1:1978/Amd 1:1985,Quantities and units of space and time — Amendment 1,Grandeurs et unités d'espace et de temps — Amendement 1,1985-08-08,1,['01.060'],ISO/TC 12,9599,,[3623],['en'],1,

3623,IS,,ISO 31-1:1992,Quantities and units — Part 1: Space and time,Grandeurs et unités — Partie 1: Espace et temps,1992-08-27,2,['01.060'],ISO/TC 12,9599,"[3624,3622]",[31888],"['en','fr']",11,"<p>Gives name, symbol and definition for 21 quantities and units of space and time. Where appropriate, conversion factors are also given. Annex A includes units based on the foot, pound and second and some other units, Annex B other non-SI units given for information, especially regarding the conversion factor.</p>"

28973,IS,Amd,ISO 31-1:1992/Amd 1:1998,Quantities and units — Part 1: Space and time — Amendment 1,Grandeurs et unités — Partie 1: Espace et temps — Amendement 1,1998-12-20,2,['01.060'],ISO/TC 12,9599,,[31888],"['en','fr']",1,

3649,IS,,ISO 31-10:1980,Quantities and units of nuclear reactions and ionizing radiations,Grandeurs et unités de réactions nucléaires et rayonnements ionisants,1980-12-01,2,['01.060'],ISO/TC 12,9599,,[3650],"['en','fr']",17,

3651,IS,Amd,ISO 31-10:1980/Amd 1:1985,Quantities and units of nuclear reactions and ionizing radiations — Amendment 1,Grandeurs et unités de réactions nucléaires et rayonnements ionisants — Amendement 1,1985-08-08,2,['01.060'],ISO/TC 12,9599,,[3650],['en'],1,

3650,IS,,ISO 31-10:1992,Quantities and units — Part 10: Nuclear reactions and ionizing radiations,Grandeurs et unités — Partie 10: Réactions nucléaires et rayonnements ionisants,1992-11-12,3,['01.060'],ISO/TC 12,9599,"[3649,3651]",[31895],"['en','fr']",25,"<p>Gives names and symbols for 70 quantities and units. Where appropriate, conversion factors are also given.</p>"

28982,IS,Amd,ISO 31-10:1992/Amd 1:1998,Quantities and units — Part 10: Nuclear reactions and ionizing radiations — Amendment 1,Grandeurs et unités — Partie 10: Réactions nucléaires et rayonnements ionisants — Amendement 1,1998-12-20,3,['01.060'],ISO/TC 12,9599,,[31895],"['en','fr']",1,

3652,IS,,ISO 31-11:1978,Mathematical signs and symbols for use in the physical sciences and technology,Signes et symboles mathématiques à employer dans les sciences physiques et dans la technique,1978-03-01,1,['01.060'],ISO/TC 12,9599,,[3653],"['en','fr']",29,

3653,IS,,ISO 31-11:1992,Quantities and units — Part 11: Mathematical signs and symbols for use in the physical sciences and technology,Grandeurs et unités — Partie 11: Signes et symboles mathématiques à employer dans les sciences physiques et dans la technique,1992-12-30,2,['01.060'],ISO/TC 12,9599,[3652],[31887],"['en','fr']",27,"<p>Gives general information about mathematical signs and symbols, their meanings, verbal equivalents, printing, notation of scalars, vectors and tensors and applications.</p>"

3654,IS,,ISO 31-12:1981,Dimensionless parameters,Paramètres sans dimension,1981-07-01,2,['01.060'],ISO/TC 12,9599,,[3655],"['en','fr']",6,

3655,IS,,ISO 31-12:1992,Quantities and units — Part 12: Characteristic numbers,Grandeurs et unités — Partie 12: Nombres caractéristiques,1992-08-27,3,['01.060'],ISO/TC 12,9599,[3654],[31896],"['en','fr']",6,"<p>Gives name, symbol and definition for 25 selected characteristic numbers used for the description of transport phenomena.</p>"

28983,IS,Amd,ISO 31-12:1992/Amd 1:1998,Quantities and units — Part 12: Characteristic numbers — Amendment 1,Grandeurs et unités — Partie 12: Nombres caractéristiques — Amendement 1,1998-12-20,3,['01.060'],ISO/TC 12,9599,,[31896],"['en','fr']",1,

3656,IS,,ISO 31-13:1981,Quantities and units of solid state physics,Grandeurs et unités de la physique de l'état solide,1981-07-01,2,['01.060'],ISO/TC 12,9599,,[3657],"['en','fr']",18,

3658,IS,Amd,ISO 31-13:1981/Amd 1:1985,Quantities and units of solid state physics — Amendment 1,Grandeurs et unités de la physique de l'état solide — Amendement 1,1985-08-08,2,['01.060'],ISO/TC 12,9599,,[3657],['en'],1,

3657,IS,,ISO 31-13:1992,Quantities and units — Part 13: Solid state physics,Grandeurs et unités — Partie 13: Physique de l'état solide,1992-08-27,3,['01.060'],ISO/TC 12,9599,"[3656,3658]",[31897],"['en','fr']",18,"<p>Gives name, symbol and definition for 62 quantities and units of solid state physics. Where appropriate, conversion factors are also given.</p>"

28984,IS,Amd,ISO 31-13:1992/Amd 1:1998,Quantities and units — Part 13: Solid state physics — Amendment 1,Grandeurs et unités — Partie 13: Physique de l'état solide — Amendement 1,1998-12-20,3,['01.060'],ISO/TC 12,9599,,[31897],"['en','fr']",1,

3625,IS,,ISO 31-2:1978,Quantities and units of periodic and related phenomena,Grandeurs et unités de phénomènes périodiques et connexes,1978-03-01,1,['01.060'],ISO/TC 12,9599,,[3626],"['en','fr']",6,

3627,IS,Amd,ISO 31-2:1978/Amd 1:1985,Quantities and units of periodic and related phenomena — Amendment 1,Grandeurs et unités de phénomènes périodiques et connexes — Amendement 1,1985-08-08,1,['01.060'],ISO/TC 12,9599,,[3626],['en'],1,

3626,IS,,ISO 31-2:1992,Quantities and units — Part 2: Periodic and related phenomena,Grandeurs et unités — Partie 2: Phénomènes périodiques et connexes,1992-08-27,2,['01.060'],ISO/TC 12,9599,"[3625,3627]",[31888],"['en','fr']",7,"<p>Gives name, symbol and definition for 17 quantities and units of periodic and related phenomena. Where appropriate, conversion factors are also given.</p>"

28974,IS,Amd,ISO 31-2:1992/Amd 1:1998,Quantities and units — Part 2: Periodic and related phenomena — Amendment 1,Grandeurs et unités — Partie 2: Phénomènes périodiques et connexes — Amendement 1,1998-12-20,2,['01.060'],ISO/TC 12,9599,,[31888],"['en','fr']",1,

3628,IS,,ISO 31-3:1978,Quantities and units of mechanics,Grandeurs et unités de mécanique,1978-03-01,1,['01.060'],ISO/TC 12,9599,,[3629],"['en','fr']",18,

3630,IS,Amd,ISO 31-3:1978/Amd 1:1985,Quantities and units of mechanics — Amendment 1,Grandeurs et unités de mécanique — Amendement 1,1985-08-08,1,['01.060'],ISO/TC 12,9599,,[3629],['en'],1,

3629,IS,,ISO 31-3:1992,Quantities and units — Part 3: Mechanics,Grandeurs et unités — Partie 3: Mécanique,1992-08-27,2,['01.060'],ISO/TC 12,9599,"[3628,3630]",[31889],"['en','fr']",18,"<p>Gives name, symbol and definition for 38 quantities and units of mechanics. Where appropriate, conversion factors are also given. Annex A includes units based on the foot, pound and second and some other units, Annex B other units given for information, especially regarding the conversion factor.</p>"

28975,IS,Amd,ISO 31-3:1992/Amd 1:1998,Quantities and units — Part 3: Mechanics — Amendment 1,Grandeurs et unités — Partie 3: Mécanique — Amendement 1,1998-12-20,2,['01.060'],ISO/TC 12,9599,,[31889],"['en','fr']",1,

3631,IS,,ISO 31-4:1978,Quantities and units of heat,Grandeurs et unités de chaleur,1978-03-01,1,['01.060'],ISO/TC 12,9599,,[3632],"['en','fr']",14,

3633,IS,Amd,ISO 31-4:1978/Amd 1:1985,Quantities and units of heat — Amendment 1,Grandeurs et unités de chaleur — Amendement 1,1985-08-08,1,['01.060'],ISO/TC 12,9599,,[3632],['en'],1,

3632,IS,,ISO 31-4:1992,Quantities and units — Part 4: Heat,Grandeurs et unités — Partie 4: Chaleur,1992-08-27,2,['01.060'],ISO/TC 12,9599,"[3631,3633]",[31890],"['en','fr']",15,"<p>Gives name, symbol and definition for 43 quantities and units of heat. Where appropriate, conversion factors are also given. Annex A includes units in the CGS system with special names, Annex B units based on the foot, pound and second and some other units, Annex C other units given for information, especially regarding the conversion factor.</p>"

28976,IS,Amd,ISO 31-4:1992/Amd 1:1998,Quantities and units — Part 4: Heat — Amendment 1,Grandeurs et unités — Partie 4: Chaleur — Amendement 1,1998-12-20,2,['01.060'],ISO/TC 12,9599,,[31890],"['en','fr']",1,

3634,IS,,ISO 31-5:1979,Quantities and units of electricity and magnetism,Grandeurs et unités d'électricité et de magnétisme,1979-02-01,1,['01.060'],ISO/TC 12,9599,,[3635],"['en','fr']",23,

3636,IS,Amd,ISO 31-5:1979/Amd 1:1985,Quantities and units of electricity and magnetism — Amendment 1,Grandeurs et unités d'électricité et de magnétisme — Amendement 1,1985-08-08,1,['01.060'],ISO/TC 12,9599,,[3635],['en'],1,

3635,IS,,ISO 31-5:1992,Quantities and units — Part 5: Electricity and magnetism,Grandeurs et unités — Partie 5: Électricité et magnétisme,1992-11-12,2,['01.060'],ISO/TC 12,9599,"[3634,3636]",[31891],"['en','fr']",28,"<p>Gives names and symbols for 70 quantities and units. Where appropriate, conversion factors are also given. Annex A describes three-dimensional equations and quantities (Gaussian quantities). Annex B includes examples of relations in different systems of equations.</p>"

28977,IS,Amd,ISO 31-5:1992/Amd 1:1998,Quantities and units — Part 5: Electricity and magnetism — Amendment 1,Grandeurs et unités — Partie 5: Électricité et magnétisme — Amendement 1,1998-12-20,2,['01.060'],ISO/TC 12,9599,,[31891],"['en','fr']",1,

3637,IS,,ISO 31-6:1980,Quantities and units of light and related electromagnetic radiations,Grandeurs et unités de lumière et de rayonnements électromagnétiques connexes,1980-12-01,2,['01.060'],ISO/TC 12,9599,,[3638],"['en','fr']",13,