Withdrawn and superseded ISO standards — page 97 of 246

8091,IS,,ISO 3013:1974,Aviation fuels — Determination of freezing point,Carburants aviation — Détermination du point de disparition des cristaux,1974-06-01,1,['75.160.20'],ISO/TC 28,9599,,[21188],"['en','fr']",4,

8092,IS,,ISO 3014:1981,Aviation turbine fuels — Determination of smoke point,Carburants aviation pour moteurs à réaction — Détermination du point de fumée,1981-12-01,2,['75.160.20'],ISO/TC 28,9599,,[8093],"['en','fr']",6,

8094,IS,,ISO 3015:1974,Petroleum oils — Determination of cloud point,Huiles de pétrole — Détermination du point de trouble,1974-05-01,1,['75.100'],ISO/TC 28,9599,,[8095],"['en','fr']",3,

8095,IS,,ISO 3015:1992,Petroleum products — Determination of cloud point,Produits pétroliers — Détermination du point de trouble,1992-08-27,2,['75.080'],ISO/TC 28,9599,[8094],"[62264,51995,72765]","['en','fr']",4,"<p>The method specified applies to petroleum products which are transparent in layers 40 mm in thickness and have a cloud point below 49 °C. The use of this standard may involve hazardous materials, operations and equipment.</p>"

8096,IS,,ISO 3016:1974,Petroleum oils — Determination of pour point,Huiles de pétrole — Détermination du point d'écoulement,1974-05-01,1,['75.080'],ISO/TC 28,9599,,[20721],"['en','fr']",3,

20721,IS,,ISO 3016:1994,Petroleum products — Determination of pour point,Produits pétroliers — Détermination du point d'écoulement,1994-08-04,2,['75.080'],ISO/TC 28,9599,[8096],"[44091,73386]",['en'],6,"<p>Cancels and replaces the first edition (1974). Gives a method for the determination of the pour point of petroleum products. Also describes a separate procedure suitable for the determination of the lower pour point of fuel oils, heavy lubricant base stock, and products containing residual fuel components.</p>"

8097,IS,,ISO 3017:1981,"Abrasive discs — Designation, dimensions and tolerances — Selection of disc outside diameter/centre hole diameter combinations","Disques abrasifs — Désignation, dimensions et tolérances — Sélection des combinaisons diamètre extérieur du disque x diamètre de l'alésage",1981-10-01,2,['25.100.70'],ISO/TC 29/SC 5,9599,,[28473],"['en','fr']",2,

8099,IS,,ISO 3019-1:1975,Hydraulic fluid power — Positive displacement pumps and motors — Dimensions and identification code for mounting flanges and shaft ends — Part 1: Inch series shown in metric units,Transmissions hydrauliques — Pompes volumétriques et moteurs — Dimensions et code d'identification des flasques de montage et des bouts d'arbres — Partie 1: Conversion en unités métriques de la série en inches,1975-02-01,1,['23.100.10'],ISO/TC 131/SC 2,9599,,[29258],"['en','fr']",8,

8100,IS,,ISO 3019-2:1980,Hydraulic fluid power — Positive displacement pumps and motors — Dimensions and identification code for mounting flanges and shaft ends — Part 2: 2 and 4-hole flanges and shaft ends — Metric series,Transmissions hydrauliques — Pompes volumétriques et moteurs — Dimensions et code d'identification des flasques de montage et des bouts d'arbres — Partie 2: Flasques à 2 et 4 trous et bouts d'arbres — Série métrique,1980-04-01,1,['23.100.10'],ISO/TC 131,9599,,[8101],"['en','fr']",12,

8101,IS,,ISO 3019-2:1986,Hydraulic fluid power — Positive displacement pumps and motors — Dimensions and identification code for mounting flanges and shaft ends — Part 2: Two- and four-hole flanges and shaft ends — Metric series,Transmissions hydrauliques — Pompes volumétriques et moteurs — Dimensions et code d'identification des flasques de montage et des bouts d'arbres — Partie 2: Flasques à deux et quatre trous et bouts d'arbres — Série métrique,1986-08-14,2,['23.100.10'],ISO/TC 131/SC 2,9599,[8100],[29259],"['en','fr']",13,

8102,IS,,ISO 3019-3:1981,Hydraulic fluid power — Positive displacement pumps and motors — Dimensions and identification code for mounting flanges and shaft ends — Part 3: Polygonal flanges (including circular flanges),Transmissions hydrauliques — Pompes volumétriques et moteurs — Dimensions et code d'identification des flasques de montage et des bouts d'arbres — Partie 3: Flasques polygonaux (y compris les flasques circulaires),1981-12-01,1,['23.100.10'],ISO/TC 131/SC 2,9599,,[8103],"['en','fr']",5,

8103,IS,,ISO 3019-3:1988,Hydraulic fluid power — Positive displacement pumps and motors — Dimensions and identification code for mounting flanges and shaft ends — Part 3: Polygonal flanges (including circular flanges),Transmissions hydrauliques — Pompes volumétriques et moteurs — Dimensions et code d'identification des flasques de montage et des bouts d'arbres — Partie 3: Flasques polygonaux (y compris les flasques circulaires),1988-10-27,2,['23.100.10'],ISO/TC 131/SC 2,9599,[8102],[29259],"['en','fr']",5,

4234,IS,,ISO 302:1981,Pulps — Determination of Kappa number,Pâtes — Détermination de l'indice Kappa,1981-02-01,1,['85.040'],ISO/TC 6,9599,,[36604],"['en','fr']",4,<p>Applies to all kinds of unbleached pulp and is also appllicable for semi-bleached pulps. The Kappa number to be determined is known to be an indication of the bleachability.</p>

36604,IS,,ISO 302:2004,Pulps — Determination of Kappa number,Pâtes — Détermination de l'indice Kappa,2004-06-24,2,['85.040'],ISO/TC 6,9599,[4234],[66533],['en'],10,"<p>ISO 302:2004 specifies a method for the determination of the Kappa number of pulp. The Kappa number is an indication of the lignin content or bleachability of pulp.</p><p>ISO 302:2004 is applicable to all kinds of chemical pulps and semi-chemical pulps within the Kappa number range 1 to 100. For pulps with a Kappa number exceeding 100, use the chlorine-consumption procedure (ISO 3260) to describe the degree of delignification.</p>"

8104,IS,,ISO 3022:1982,Cinematography — 35 mm motion-picture film perforated 16 mm (1-3-0) — Cutting and perforating dimensions,Cinématographie — Film cinématographique 35 mm à perforations 16 mm (1-3-0) — Dimensions de coupe et de perforation,1982-11-01,2,['37.060.20'],ISO/TC 36,9599,,[8105],"['en','fr']",2,

8106,IS,,ISO 3023:1984,Cinematography — 65 and 70 mm unexposed motion-picture film — Cutting and perforating dimensions,Cinématographie — Films cinématographiques vierges 65 mm et 70 mm — Dimensions de coupe et de perforation,1984-03-01,2,['37.060.20'],ISO/TC 36,9599,,[8107],"['en','fr']",3,

8107,IS,,ISO 3023:1988,Cinematography — 65 mm and 70 mm unexposed motion-picture film — Cutting and perforating dimensions,Cinématographie — Films cinématographiques vierges 65 mm et 70 mm — Dimensions de coupe et de perforation,1988-10-27,3,['37.060.20'],ISO/TC 36,9599,[8106],[23292],"['en','fr']",4,

8110,IS,,ISO 3026:1975,"Cinematography — Printed 8 mm Type S image area on 35 mm motion-picture film perforated 8 mm Type S, 2R-4.227 (1664) or 5R-4.234 (1667) — Position and dimensions","Cinématographie — Surface d'image 8 mm type S produite par tirage sur film cinématographique 35 mm perforé 8 mm type S, 2R-4,227 (1664) ou 5R-4,234 (1667) — Position et dimensions",1975-02-01,1,['37.060.20'],ISO/TC 36,9599,,[20537],"['en','fr']",2,

8111,IS,,ISO 3027:1975,Cinematography — Magnetic stripes and recording head gaps for sound record on 8 mm Type S motion-picture prints — Positions and width dimensions,Cinématographie — Pistes magnétiques et entrefers de têtes d'enregistrement du son sur copies cinématographiques 8 mm type S — Emplacements et dimensions en largeur,1975-03-01,1,['37.060.20'],ISO/TC 36,9599,,[8112],"['en','fr']",2,

8113,IS,,ISO 3028:1974,Photography — Expendable photoflash lamps — Determination of relative spectral energy distribution for calculation of spectral distribution index,Photographie — Lampes à éclair à combustion — Détermination de la distribution spectrale énergétique relative en vue du calcul de l'indice de distribution spectrale,1974-12-01,1,['37.040.10'],ISO/TC 42,9599,,[8114],"['en','fr']",6,

8115,IS,,ISO 3029:1983,"Photography — 126-size cartridges — Dimensions of cartridge, film and backing paper","Photographie — Chargeur format 126 — Dimensions du chargeur, du film et du papier protecteur",1983-08-01,2,['37.040.20'],ISO/TC 42,9599,,[20056],"['en','fr']",14,

4236,IS,,ISO 303:1986,Road vehicles — Installation of lighting and light signalling devices for motor vehicles and their trailers,Véhicules routiers — Installation des feux d'éclairage et de signalisation pour les véhicules à moteur et leurs remorques,1986-02-27,1,['43.040.20'],ISO/TC 22,9599,[4235],"[33511,20422]","['en','fr']",55,"<p>This edition cancels and replaces the ISO Recommendation R 303-1963. Defines the essential characteristics for the installation of lighting and light signalling devices. Is not applicable to vehicles which run on rails, agricultural or forestry tractors and machinery, and public works vehicles.</p>"

33511,IS,,ISO 303:2002,Road vehicles — Installation of lighting and light signalling devices for motor vehicles and their trailers,Véhicules routiers — Installation des feux d'éclairage et de signalisation pour les véhicules à moteur et leurs remorques,2002-09-12,2,['43.040.20'],ISO/TC 22,9599,[4236],[54018],"['en','fr']",67,"<p>This International Standard specifies the essential characteristics for the installation of lighting and light signalling devices on motor vehicles with or without bodywork and with at least four wheels, intended for on-road use and having a maximum design speed of more than 25 km/h, and their trailers. It is not applicable to vehicles that run on rails, to agricultu

38064,IS,Cor,ISO 303:2002/Cor 1:2003,Road vehicles — Installation of lighting and light signalling devices for motor vehicles and their trailers — Technical Corrigendum 1,Véhicules routiers — Installation des feux d'éclairage et de signalisation pour les véhicules à moteur et leurs remorques — Rectificatif technique 1,2003-07-21,2,['43.040.20'],ISO/TC 22,9599,,[54018],['en'],2,

8116,IS,,ISO 3030-1:1974,Needle roller bearings — Needle roller and cage assemblies — Metric series — Part 1: Radial needle roller and cage assemblies — Boundary dimensions and tolerances,Roulements à aiguilles — Cages à aiguilles — Séries métriques — Partie 1: Cages à aiguilles radiales — Dimensions d'encombrement et tolérances,1974-04-01,1,['21.100.20'],ISO/TC 4/SC 5,9599,,[20524],"['en','fr']",4,

20524,IS,,ISO 3030:1996,Rolling bearings — Radial needle roller and cage assemblies — Dimensions and tolerances,Roulements — Cages à aiguilles radiales — Dimensions et tolérances,1996-12-26,2,['21.100.20'],ISO/TC 4/SC 5,9599,[8116],[50188],"['en','fr']",4,"<p>Specifies the boundary dimensions for needle roller and cage radial assemblies and gives preferred dimensions to be used. In addition, it gives the tolerances for the width of cages.</p>"

50188,IS,,ISO 3030:2011,Rolling bearings — Radial needle roller and cage assemblies — Boundary dimensions and tolerances,Roulements — Cages à aiguilles radiales — Dimensions d'encombrement et tolérances,2011-09-26,3,['21.100.20'],ISO/TC 4/SC 5,9599,[20524],[73478],"['en','fr']",9,"<p>ISO 3030:2011 specifies the boundary dimensions for radial needle roller and cage assemblies.</p><p>In addition, it gives the tolerances for the cage width and method of functional gauging of smallest single bore diameter of needle roller complement.</p>"

53732,IS,,ISO 30300:2011,Information and documentation — Management systems for records — Fundamentals and vocabulary,Information et documentation — Systèmes de gestion des documents d'activité — Principes essentiels et vocabulaire,2011-11-09,1,"['01.140.20','01.040.01']",ISO/TC 46/SC 11,9599,,[74291],"['en','fr','ru']",17,"<p>ISO 30300:2011 defines terms and definitions applicable to the standards on management systems for records (MSR) prepared by ISO/TC 46/SC 11. It also establishes the objectives for using a MSR, provides principles for a MSR, describes a process approach and specifies roles for top management. </p><p>ISO 30300:2011 is applicable to any type of organization that wishes t

53733,IS,,ISO 30301:2011,Information and documentation — Management systems for records — Requirements,Information et documentation — Systèmes de gestion des documents d'activité — Exigences,2011-11-09,1,['01.140.20'],ISO/TC 46/SC 11,9599,,[74292],"['en','fr','ru']",22,"<p>ISO 30301:2011 specifies requirements to be met by a management system for records (MSR) in order to support an organization in the achievement of its mandate, mission, strategy and goals. It addresses the development and implementation of a records policy and objectives and gives information on measuring and monitoring performance. </p><p>ISO 30301:2011 can be implemented with other Management System Standards (MSS). It i

54673,IS,,ISO 30302:2015,Information and documentation — Management systems for records — Guidelines for implementation,Information et documentation — Système de gestion des documents d'activité — Lignes directrices de mise en oeuvre,2015-10-19,1,['01.140.20'],ISO/TC 46/SC 11,9599,,[81595],"['en','fr']",30,"<p>ISO 30302:2015 gives guidance for the implementation of a MSR in accordance with ISO 30301. This International Standard is intended to be used in conjunction with ISO 30300 and ISO 30301. This International Standard does not modify and/or reduce the requirements specified in ISO 30301. It describes the activities to be undertaken when designing and implementing a MSR.</p><p>ISO 30302:2

8117,IS,,ISO 3031:1979,"Needle roller bearings — Thrust needle roller and cage assemblies, thrust washers — Dimensions and tolerances",Roulements à aiguilles — Cages à aiguilles axiales et plaques de butée — Dimensions et tolérances,1979-10-01,2,['21.100.20'],ISO/TC 4/SC 5,9599,,[20527],"['en','fr']",2,

20527,IS,,ISO 3031:2000,"Rolling bearings — Thrust needle roller and cage assemblies, thrust washers — Boundary dimensions and tolerances",Roulements — Cages à aiguilles axiales et rondelles de butée — Dimensions d'encombrement et tolérances,2000-08-17,3,['21.100.20'],ISO/TC 4/SC 5,9599,[8117],[73479],"['en','fr']",6,

8118,IS,,ISO 3033:1975,Oil of spearmint,Huile essentielle de menthe crépue,1975-02-01,1,['71.100.60'],ISO/TC 54,9599,,[8119],"['en','fr']",2,

8119,IS,,ISO 3033:1988,Oil of spearmint (Mentha spicata Linnaeus),Huile essentielle de menthe verte ou de menthe crépue (Mentha spicata Linnaeus),1988-07-07,2,['71.100.60'],ISO/TC 54,9599,[8118],"[28606,34581,34582,34583,34580]","['en','fr']",4,"<p>The Standard specifies the following characteristics of the oil. Appearance: Clear, mobile liquid. Colour: Almost colourless to pale greenish-yellow. Odour and flavour: Fresh and recalling the odour of the leaf. Relative density at 20/20 °C: 0,920 - 0,937. Refractive index at 20 °C: 1,4850 - 1,4910. Optical rotation at 20 °C: - 60 to - 45 . Miscibility in 80 % (V/V) ethanol at 20 °C: 1: 1. Carbonyl value: Minimum 200. Chromatographic profile: Typi

8120,IS,,ISO 3034:1975,Corrugated fibreboard — Determination of thickness,Carton ondulé — Détermination de l'épaisseur,1975-05-01,1,['85.060'],ISO/TC 6/SC 2,9599,,[51266],"['en','fr']",3,

8121,IS,,ISO 3035:1982,Single-faced and single-wall corrugated fibreboard — Determination of flat crush resistance,Carton ondulé simple face et double face — Détermination de la résistance à la compression à plat,1982-12-01,2,['85.060'],ISO/TC 6/SC 2,9599,,[51267],"['en','fr']",2,"<p>Is applicable to corrugated fibreboard used in the manufacture of packing cases, and is not applicable to double-wall (double-double-faced) corrugated fibreboard.</p>"

51267,IS,,ISO 3035:2011,Corrugated fibreboard — Determination of flat crush resistance,Carton ondulé — Détermination de la résistance à la compression à plat,2011-10-26,3,['85.080.30'],ISO/TC 6/SC 2,9599,[8121],[86594],"['en','fr']",8,

8122,IS,,ISO 3036:1975,Board — Determination of puncture resistance,Carton — Détermination de la résistance à la perforation,1975-06-01,1,['85.060'],ISO/TC 6/SC 2,9599,,"[85332,69061]","['en','fr']",3,

8123,IS,,ISO 3037:1982,Corrugated fibreboard — Determination of edgewise crush resistance,Carton ondulé — Détermination de la résistance à la compression de chant,1982-12-01,2,['85.060'],ISO/TC 6/SC 2,9599,,[22209],"['en','fr']",2,

22209,IS,,ISO 3037:1994,Corrugated fibreboard — Determination of edgewise crush resistance (Unwaxed edge method),Carton ondulé — Détermination de la résistance à la compression sur chant (Méthode sans enduction de cire),1994-11-10,3,['85.060'],ISO/TC 6/SC 2,9599,[8123],"[36138,40155]","['en','fr']",3,<p>Cancels and replaces the second edition (1982). Specifies a method for the determination of edgewise crush resistance of corrugated fibreboard. Applicable to all corrugated fibreboard grades.</p>

40155,IS,,ISO 3037:2007,Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method),Carton ondulé — Détermination de la résistance à la compression sur chant (méthode sans enduction de cire),2007-02-15,4,['85.060'],ISO/TC 6/SC 2,9599,[22209],[60354],"['en','fr']",5,<p>ISO 3037: 2007 specifies an unwaxed edge method for the determination of the edgewise crush resistance of corrugated fibreboard. It is applicable to all corrugated fibreboard grades.</p>

60354,IS,,ISO 3037:2013,Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method),Carton ondulé — Détermination de la résistance à la compression sur chant (méthode sans enduction de cire),2013-07-25,5,['85.080.30'],ISO/TC 6/SC 2,9599,[40155],[80310],"['en','fr']",8,<p>ISO 3037:2013 specifies an unwaxed edge method for the determination of the edgewise crush resistance of corrugated fibreboard. It is applicable to all corrugated fibreboard grades.</p>

8125,IS,,ISO 3039:1975,Corrugated fibreboard — Determination of the grammage of the component papers after separation,Carton ondulé — Détermination du grammage des papiers composants après leur séparation,1975-05-01,1,['85.060'],ISO/TC 6/SC 2,9599,,[45688],"['en','fr']",2,"<p>Refers to the grammage of the individual papers form which corrugated fibreboard has been made, and is applicable to all types of corrugated fibreboard. Sampling shall be according to ISO/R 186, conditioning according to ISO 187 and the determination of grammage according to ISO 536.</p>"

4237,IS,,ISO 304:1978,Surface active agents — Determination of surface tension by drawing up liquid films,Agents de surface — Détermination de la tension superficielle par étirement de films,1978-11-01,1,['71.100.40'],ISO/TC 91,9599,,[4238],"['en','fr']",7,

8126,IS,,ISO 3040:1974,Technical drawings — Dimensioning and tolerancing cones,Dessins techniques — Cotation et tolérancement des éléments coniques,1974-06-01,1,['01.100.20'],ISO/TC 10,9599,,[8127],"['en','fr']",11,

8127,IS,,ISO 3040:1990,Technical drawings — Dimensioning and tolerancing — Cones,Dessins techniques — Cotation et tolérancement — Cônes,1990-12-06,2,['01.100.20'],ISO/TC 213,9599,[8126],[53952],"['en','fr']",6,<p>Establishes the definition of cones and specifies the graphical symbol to be used for their indication and methods for their dimensioning and tolerancing. Applies only to right-angle circular cones. This second edition cancels and replaces the first edition (1974).</p>

53952,IS,,ISO 3040:2009,Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones,Spécification géométrique des produits (GPS) — Cotation et tolérancement — Cônes,2009-11-26,3,['01.100.20'],ISO/TC 213,9599,[8127],[67649],"['en','fr']",11,"<p>ISO 3040:2009 establishes the definition of cones and specifies the graphical symbol to be used for their indication and methods for their dimensioning and tolerancing.</p><p>For the purposes of ISO 3040:2009, the term “cone” relates to right-angle circular cones only.</p>"

66032,IS,,ISO 30400:2016,Human resource management — Vocabulary,Management des ressources humaines — Vocabulaire,2016-08-30,1,"['03.100.30','01.040.03']",ISO/TC 260,9599,,[78044],"['en','fr']",13,<p>ISO 30400:2016 defines terms used in human resource management standards.</p>

64149,IS,,ISO 30405:2016,Human resource management — Guidelines on recruitment,Management des ressources humaines — Lignes directrices relatives au recrutement,2016-08-30,1,['03.100.30'],ISO/TC 260,9599,,[79488],"['en','fr']",19,"<p>ISO 30405:2016 provides guidance on how to attract, source, assess and recruit people. It focuses on key processes and practices, including:</p><p>· recruitment policy development;</p><p>· the flow from the sourcing of potential applicants to the boarding of new recruits;</p><p>· evaluation and measurement.</p><p>ISO 30405:2016 can be used by any organization regardless of type or size.</p>"

69338,IS,,ISO 30414:2018,Human resource management — Guidelines for internal and external human capital reporting,Management des ressources humaines — Lignes directrices sur le bilan du capital humain interne et externe,2018-12-19,1,['03.100.30'],ISO/TC 260,9599,,[86106],"['en','fr']",35,"<p>This document provides guidelines for internal and external human capital reporting (HCR). The objective is to consider and to make transparent the human capital contribution to the organization in order to support sustainability of the workforce. This document is applicable to all organizations, regardless of the type, size, nature or complexity of the business, whether in the public, private or volunta

8129,IS,,ISO 3042:1983,Cinematography — Labelling of containers for unexposed motion-picture films and magnetic films — Minimum information specifications,Cinématographie — Étiquetage des boîtes pour films cinématographiques et magnétiques vierges — Spécifications minimales d'information,1983-03-01,2,['37.060.20'],ISO/TC 36,9599,[5791],[8130],"['en','fr']",4,

8131,IS,,ISO 3043:1975,Oil of pimento berry,Huile essentielle de baies de piment dit de la Jamaïque,1975-02-01,1,['71.100.60'],ISO/TC 54,9599,,[8132],"['en','fr']",1,"<p>The Standard specifies the following characteristics of the oil. Appearance: Mobile liquid. Colour: Pale yellow to brown. Odour: Spicy, resembling eugenol. Relative density at 20/20 °C: 1,027 - 1,048. Refractive index at 20 °C: 1,5250 - 1,5400. Optical rotation at 20 °C: Range from - 5 to 0 . Solubility in 70 % (V/V) ethanol at 20 °C: 1 : 2. Phenols content: Minimum 65 % (V/V).</p>"

8133,IS,,ISO 3044:1974,Oil of Eucalyptus citriodora,Huile essentielle d'Eucalyptus citriodora,1974-08-01,1,['71.100.60'],ISO/TC 54,9599,,[8134],"['en','fr']",2,

8134,IS,,ISO 3044:1997,Oil of eucalyptus citriodora Hook.,Huile essentielle d'Eucalyptus citriodora Hook.,1997-07-10,2,['71.100.60'],ISO/TC 54,9599,[8133],[77267],"['en','fr']",5,

8135,IS,,ISO 3045:1974,Oil of bay,Huile essentielle de bay,1974-03-01,1,['71.100.60'],ISO/TC 54,9599,,"[8136,35233]","['en','fr']",1,"<p>The Standard specifies the following characteristics of the oil. Appearance: Clear, mobile liquid. Colour: Dark brown. Odour: Resembling eugenol. Relative density at 20/20 °C: 0,943 - 0,984. Refractive index at 20 °C: 1,5050 - 1,5170. Phenols content: Minimum 50 % (V/V).</p>"

8137,IS,,ISO 3046-1:1981,"Reciprocating internal combustion engines — Performance — Part 1: Standard reference conditions and declarations of power, fuel consumption and lubricating oil consumption",Moteurs alternatifs à combustion interne — Performances — Partie 1: Conditions normales de référence et déclarations de la puissance et des consommations de combustible et d'huile de graissage,1981-10-01,2,['27.020'],ISO/TC 70,9599,,[8138],"['en','fr']",25,

8138,IS,,ISO 3046-1:1986,"Reciprocating internal combustion engines — Performance — Part 1: Standard reference conditions and declarations of power, fuel consumption and lubricating oil consumption",Moteurs alternatifs à combustion interne — Performances — Partie 1: Conditions normales de référence et déclarations de la puissance et des consommations de combustible et d'huile de graissage,1986-08-21,3,['27.020'],ISO/TC 70,9599,[8137],[8139],"['en','fr']",15,

8140,IS,Amd,ISO 3046-1:1986/Amd 1:1987,"Reciprocating internal combustion engines — Performance — Part 1: Standard reference conditions and declarations of power, fuel consumption and lubricating oil consumption — Amendment 1",Moteurs alternatifs à combustion interne — Performances — Partie 1: Conditions normales de référence et déclarations de la puissance et des consommations de combustible et d'huile de graissage — Amendement 1,1987-12-17,3,['27.020'],ISO/TC 70,9599,,[8139],['en'],1,

8139,IS,,ISO 3046-1:1995,"Reciprocating internal combustion engines — Performance — Part 1: Standard reference conditions, declarations of power, fuel and lubricating oil consumptions, and test methods","Moteurs alternatifs à combustion interne — Performances — Partie 1: Conditions normales de référence, déclaration de la puissance et de la consommation de carburant et d'huile de lubrification, méthodes d'essai",1995-12-07,4,['27.020'],ISO/TC 70,9599,"[8138,8140]",[28330],"['en','fr']",36,"<p>Specifies standard reference conditions and methods of declaring the power, fuel consumption, lubricating oil consumption and test methods for reciprocating internal combustion engines. Applicable to en

8142,IS,,ISO 3046-2:1977,Reciprocating internal combustion engines — Performance — Part 2: Test methods,Moteurs alternatifs à combustion interne — Performances — Partie 2: Méthodes d'essai,1977-10-01,1,['27.020'],ISO/TC 70,9599,,[8143],"['en','fr']",6,

8143,IS,,ISO 3046-2:1987,Reciprocal internal combustion engines — Performance — Part 2: Test methods,Moteurs alternatifs à combustion interne — Performances — Partie 2: Méthodes d'essai,1987-10-29,2,['27.020'],ISO/TC 70,9599,[8142],[28330],"['en','fr']",14,

8144,IS,,ISO 3046-3:1979,Reciprocating internal combustion engines : Performance — Part 3: Test measurements,Moteurs alternatifs à combustion interne — Performances — Partie 3: Mesures pour les essais,1979-02-01,1,['27.020'],ISO/TC 70,9599,,[8145],"['en','fr']",4,

8145,IS,,ISO 3046-3:1989,Reciprocating internal combustion engines — Performance — Part 3: Test measurements,Moteurs alternatifs à combustion interne — Performances — Partie 3: Mesures pour les essais,1989-11-23,2,['27.020'],ISO/TC 70,9599,[8144],[37496],"['en','fr']",4,"<p>Summarizes the common techniques of measurement of the main parameters of engines to ensure the required precision of measurements. Where necessary, individual requirements may be given for particular application. It applies to engines for land, rail-traction, and marine use, excluding engines used to propel agicultural tractors, road vehicles and aircraft.</p>"

8146,IS,,ISO 3046-4:1978,Reciprocating internal combustion engines — Performance — Part 4: Speed governing,Moteurs alternatifs à combustion interne — Performances — Partie 4: Régulation de la vitesse,1978-09-01,1,['27.020'],ISO/TC 70,9599,,[8147],"['en','fr']",7,

8147,IS,,ISO 3046-4:1997,Reciprocating internal combustion engines — Performance — Part 4: Speed governing,Moteurs alternatifs à combustion interne — Performances — Partie 4: Régulation de la vitesse,1997-03-13,2,['27.020'],ISO/TC 70,9599,[8146],[44318],"['en','fr']",13,

8148,IS,,ISO 3046-5:1978,Reciprocating internal combustion engines — Performance — Part 5: Torsional vibrations,Moteurs à combustion interne — Performances — Partie 5: Vibrations de torsion,1978-12-01,1,"['27.020','17.160']",ISO/TC 70,9599,,[24378],"['en','fr']",1,

8149,IS,,ISO 3046-6:1982,Reciprocating internal combustion engines — Performance — Part 6: Overspeed protection,Moteurs alternatifs à combustion interne — Performances — Partie 6: Protection contre la survitesse,1982-10-01,2,['27.020'],ISO/TC 70,9599,,[8150],"['en','fr']",2,

8150,IS,,ISO 3046-6:1990,Reciprocating internal combustion engines — Performance — Part 6: Overspeed protection,Moteurs alternatifs à combustion interne — Performances — Partie 6: Protection contre la survitesse,1990-08-23,3,['27.020'],ISO/TC 70,9599,[8149],[74689],"['en','fr']",3,"<p>Establishes general requirements and definitions for limiting devices. Where necessary, individual requirements may be given for particular applications. it applies to engines for land, rail-traction, and marine use, excluding engines used to propel agricultural and industrial types of tractors, road vehicles and aircraft, road construction and earth-moving machines.</p>"

8152,IS,,ISO 3046-7:1987,Reciprocating internal combustion engines — Performance — Part 7: Codes for engine power,Moteurs alternatifs à combustion interne — Performances — Partie 7: Codes des puissances de moteur,1987-09-24,1,['27.020'],ISO/TC 70,9599,,[8153],"['en','fr']",4,

8153,IS,,ISO 3046-7:1995,Reciprocating internal combustion engines — Performance — Part 7: Codes for engine power,Moteurs alternatifs à combustion interne — Performances — Partie 7: Codes de puissance des moteurs,1995-12-07,2,['27.020'],ISO/TC 70,9599,[8152],[28330],"['en','fr']",3,"<p>Defines codes for brake fuel stop power in accordance with ISO 3046-1, in order, where necessary, to simplify the application of the statements of power specified in ISO 3046-1 and to facilitate communication. Applicable to engines used to propel road construction and earth-moving machines and industrial trucks. Engines used to propel agricultural tractors, road vehicles and aircraft are excluded.</p>"

4239,IS,,ISO 305:1976,"Plastics — Determination of thermal stability of polyvinyl chloride, related chlorine-containing polymers and copolymers, and their compounds — Discoloration method","Matières plastiques — Détermination de la stabilité thermique du polychlorure de vinyle, des copolymères chlorés apparentés et de leurs compositions — Méthode du changement de couleur",1976-07-01,1,['83.080.20'],ISO/TC 61,9599,,[4240],"['en','fr']",2,

4240,IS,,ISO 305:1990,"Plastics — Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds — Discoloration method","Plastiques — Détermination de la stabilité thermique du poly(chlorure de vinyle), des homopolymères et copolymères chlorés apparentés et de leurs compositions — Méthode du changement de couleur",1990-04-12,2,['83.080.20'],ISO/TC 61/SC 9,9599,[4239],[70415],"['en','fr']",4,"<p>Specification of a comparing method, based on the increasing discoloration of polyvinylchloride when exposed to heat, due to a decomposition reaction. Test pieces in diskform are placed between aluminium pieces and heated to the

72523,IS,,ISO 30500:2018,Non-sewered sanitation systems — Prefabricated integrated treatment units — General safety and performance requirements for design and testing,Systèmes d'assainissement autonomes — Unités de traitement intégrées préfabriquées — Exigences générales de performance et de sécurité pour la conception et les essais,2018-10-02,1,"['13.020.20','91.140.70']",ISO/TMBG,9599,,[87343],"['en','fr']",89,"<p>This document specifies general safety and performance requirements for design and testing as well as sustainability considerations for non-sewered sanitation systems (NSSS). A NSSS, for the purposes of this document, is a prefabricated integrated treatment unit, comprising fron

8159,IS,,ISO 3053:1975,Oil of grapefruit (obtained by expression),Huile essentielle de pomélo (obtenue par expression),1975-03-01,1,['71.100.60'],ISO/TC 54,9599,,"[32040,8160]","['en','fr']",2,"<p>The Standard specifies the following characteristics of the oil. Appearance: Clear liquid. Colour: Greenish-yellow. Odour: Resembling oil of sweet orange. Relative density at 20/20 °C: 0,852 - 0,860. Refractive index at 20 °C: 1,4740 - 1,4790. Optical rotation at 20 °C: Range from + 91 to + 96 . Carbonyl compounds content, expressed as decanal: Minimum 1,0 %. Residue on evaporation: 5,0 % - 10,0 %.</p>"

8161,IS,,ISO 3054:1976,Oil of lavandin abrialis,Huile essentielle de lavandin abrialis,1976-12-01,1,['71.100.60'],ISO/TC 54,9599,,[8162],"['en','fr']",2,

8162,IS,,ISO 3054:1987,"Oil of lavandin abrialis (Lavandula angustifolia P. Miller x Lavandula latifolia (Linnaeus f.) Medikus), France","Huile essentielle de lavandin abrialis (Lavandula angustifolia P. Miller x Lavandula latifolia (Linnaeus f.) Medikus), France",1987-11-12,2,['71.100.60'],ISO/TC 54,9599,[8161],[28589],"['en','fr']",4,"<p>The Standard specifies the following characteristics of the oil. Appearance: Clear, mobile liquid. Colour: Pale yellow. Odour: Characteristic, resembling lavender, with a camphoraceous note. Relative density at 20/20 °C: 0,885 - 0,897. Refractive index at 20 °C: 1,4580 - 1,4640. Optical rotation at 20 °C: Range from - 5 to - 2 . Miscibility with 70 % (V/V)

28589,IS,,ISO 3054:2001,"Oil of lavandin Abrial (Lavandula angustifolia Miller x Lavandula latifolia Medikus), French type","Huile essentielle de lavandin Abrial (Lavandula angustifolia Miller x Lavandula latifolia Medikus), type France",2001-07-26,3,['71.100.60'],ISO/TC 54,9599,[8162],[67961],"['en','fr']",8,

67961,IS,,ISO 3054:2017,"Essential oil of lavandin Abrial (Lavandula angustifolia Mill. × Lavandula latifolia Medik.), French type","Huile essentielle de lavandin Abrial (Lavandula angustifolia Mill. × Lavandula latifolia Medik.), type France",2017-02-02,4,['71.100.60'],ISO/TC 54,9599,[28589],[88591],"['en','fr']",8,"<p>ISO 3054:2017 specifies certain characteristics of the essential oil of lavandin Abrial (<i>Lavandula angustifolia</i> Mill. × <i>Lavandula latifolia</i> Medik.), principally produced in France, in order to facilitate assessment of its quality.</p><p>NOTE This essential oil is also known commercially as oil of lavandin abrialis.</p>"

8163,IS,,ISO 3055:1974,Kitchen equipment — Co-ordinating sizes,Équipement de cuisine — Dimensions de coordination,1974-11-01,1,['97.040.01'],ISO/TC 59,9599,,[8164],"['en','fr']",2,

8164,IS,,ISO 3055:1985,Kitchen equipment — Coordinating sizes,Équipement de cuisine — Dimensions de coordination,1985-05-02,2,['97.040.01'],ISO/TC 136,9599,[8163],"[73868,62196,29038]","['en','fr']",16,"<p>Defines sizes for components of kitchen equipment in dwellings. Specifies also, in annex A, the sizes of zones for hot and cold water and waste and gas pipes in kitchen cabinets and certain appliances. Applies to all components of kitchen equipment, for example cabinets, work-tops, sink units and appliances.</p>"

8165,IS,,ISO 3056:1974,Non-calibrated round steel link lifting chain and chain slings — Safe use and maintenance,Chaînes de levage non calibrées en acier rond et élingues à chaînes — Sécurité d'emploi et entretien,1974-11-01,1,['53.020.30'],ISO/TC 111/SC 1,9599,,[8166],"['en','fr']",9,

8167,IS,,ISO 3057:1974,Non-destructive testing — Metallographic replica techniques of surface examination,Essais non destructifs — Techniques de réplique métallographique pour l'examen des surfaces,1974-04-01,1,['19.100'],ISO/TC 135/SC 2,9599,,[1793],"['en','fr']",2,

8168,IS,,ISO 3058:1974,Non-destructive testing — Aids to visual inspection — Selection of low-power magnifiers,Essais non destructifs — Moyens d'examen visuel — Choix des loupes à faible grossissement,1974-04-01,1,['19.100'],ISO/TC 135/SC 2,9599,,[1712],"['en','fr']",4,

8169,IS,,ISO 3059:1974,Non-destructive testing — Method for indirect assessment of black light sources,Essais non destructifs — Méthode d'évaluation indirecte des sources de lumière noire,1974-06-01,1,['19.100'],ISO/TC 135/SC 2,9599,,[32510],"['en','fr']",6,<p>Specifies a procedure for assessing the output of black light lamps used in fluorescent magnetic particle and penetrant flaw detection techniques. Applies to both new lamps and lamps in service. May also be used for checking that specified levels of black light illumination are achieved and maintained. A control test for checking the fluorescence of penetrant liqids is specified in Annex A.</p>

32510,IS,,ISO 3059:2001,Non-destructive testing — Penetrant testing and magnetic particle testing - Viewing conditions,Essais non destructifs — Essai par ressuage et essai par magnétoscopie — Conditions d'observation,2001-11-01,2,['19.100'],ISO/TC 135/SC 2,9599,[8169],[56122],"['en','fr']",4,

4241,IS,,ISO 306:1974,Plastics — Determination of the Vicat softening temperature of thermoplastics,Matières plastiques — Détermination de la température de ramollissement Vicat des thermoplastiques,1974-12-01,1,['83.080.20'],ISO/TC 61,9599,,[4242],"['en','fr']",3,

4242,IS,,ISO 306:1987,Plastics — Thermoplastic materials — Determination of Vicat softening temperature,Plastiques — Matières thermoplastiques — Détermination de la température de ramollissement Vicat,1987-12-17,2,['83.080.20'],ISO/TC 61/SC 2,9599,[4241],[22081],"['en','fr']",3,

22081,IS,,ISO 306:1994,Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST),Plastiques — Matières thermoplastiques — Détermination de la température de ramollissement Vicat (VST),1994-07-21,3,['83.080.20'],ISO/TC 61/SC 2,9599,[4242],[33317],"['en','fr']",5,"<p>Specifies four methods for the determination: method A50 using a force of 10 N and a heating rate of 50 °C/h, method B50 using a force of 50 N and a heating rate of 50 °C/h, method A120 using a force of 10 N and a heating rate of 120 °C/h, method B120 using a force of 50 N and a heating rate of 120 °C/h. The principle is determining the temperature at which a standard indenter penetrates 1 mm into the

33317,IS,,ISO 306:2004,Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST),Plastiques — Matières thermoplastiques — Détermination de la température de ramollissement Vicat (VST),2004-07-13,4,['83.080.20'],ISO/TC 61/SC 2,9599,[22081],[55647],"['en','fr']",10,"<p>ISO 306:2004 specifies four methods for the determination of the Vicat softening temperature (VST) of thermoplastic materials: </p><ol><li>Method A50 using a force of 10 N and a heating rate of 50 °C/h</li><li>Method B50 using a force of 50 N and a heating rate of 50 °C/h</li><li>Method A120 using a force of 10 N and a heating rate of 120 °C/h</li><li>Method B120 using a force of 50 N and a heating

55647,IS,,ISO 306:2013,Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST),Plastiques — Matières thermoplastiques — Détermination de la température de ramollissement Vicat (VST),2013-11-08,5,['83.080.20'],ISO/TC 61/SC 2,9599,[33317],[82176],"['en','fr']",16,"<p>ISO 306:2013 specifies four methods for the determination of the Vicat softening temperature (VST) of thermoplastic materials:</p><ul><li>method A50 using a force of 10 N and a heating rate of 50 K/h;</li><li>method B50 using a force of 50 N and a heating rate of 50 K/h;</li><li>method A120 using a force of 10 N and a heating rate of 120 K/h;</li><li>method B120 using a force of 50 N and a heating r

8171,IS,,ISO 3061:1979,Oil of black pepper,Huile essentielle de poivre noir,1979-09-01,1,['71.100.60'],ISO/TC 54,9599,,"[8172,41617]","['en','fr']",2,"<p>The Standard specifies the following characteristics of the oil. Appearance: Clear, mobile liquid. Colour: Almost colourless to bluish-green. Odour: Characteristic, recalling that of whole pepper. Relative density at 20/20 °C: 0,870 - 0,890. Refractive index at 20 °C: 1,4800 - 1,4920. Optical rotation at 20 °C: Range from - 16 to + 4 . Miscibility with 95 % (V/V) ethanol at 20 °C: 1 : 3. Ester value: Maximum 11.</p>"

8174,IS,,ISO 3063:1983,Oil of ylang-ylang (Cananga odorata (Lamark) J.D. Hooker and Thomson)),Huile essentielle d'ylang-ylang (Cananga odorata (Lamark) J.D. Hooker et Thomson),1983-11-01,1,['71.100.60'],ISO/TC 54,9599,,[34878],"['en','fr']",2,"<p>The oil is not generally collected as a whole but in four successive fractions during the course of distillation. These four fractions. known respectively as 'extra', 'first', 'second' and 'third', are the oils usually found in the trade. Descriptions and permissible values for the characteristics appearance, colour, odour, relative density at 20/20 °C, refractive index at 20 °C, optical rotation at 20 °C, acid value, ester value are given in a tabl

8175,IS,,ISO 3064:1977,"Oil of petitgrain, Paraguay","Huile essentielle de Petitgrain, Paraguay",1977-02-01,1,['71.100.60'],ISO/TC 54,9599,,"[33775,8176]","['en','fr']",2,

33775,IS,,ISO 3064:2000,"Oil of petitgrain, Paraguayan type (Citrus aurantium L. ssp. aurantium, syn. Citrus aurantium L. ssp. amara var. pumilia)","Huile essentielle de petitgrain, type Paraguay (Citrus aurantium L. ssp. aurantium, syn. Citrus aurantium L. ssp. amara var. pumilia)",2000-07-27,2,['71.100.60'],ISO/TC 54,9599,[8175],[58032],"['en','fr']",7,

8177,IS,,ISO 3065:1974,"Oil of Australian Eucalyptus, 80 to 85 % cineole content","Huile essentielle d'Eucalyptus d'Australie, de teneur en cinéole 80 à 85 %",1974-03-01,1,['71.100.60'],ISO/TC 54,9599,,"[52141,8178]","['en','fr']",2,"<p>The Standard specifies the following characteristics of the oil. Appearance: Clear, mobile liquid. Colour: Colourless to pale yellow. Odour: Characteristic of the odour of 1,8-cineole. Relative density at 20/20 °C: 0,918 - 0,928. Refractive index at 20 °C: 1,4580 - 1,4650. Optical rotation at 20 °C: Range from - 2 to + 2 . Solubility in 70 % (V/V) ethanol at 20 °C: 1 volume in 3 volumes. Cineole content: 80 - 85 %.</p>"

52141,IS,,ISO 3065:2011,"Oil of eucalyptus Australian type, containing a volume fraction of 80 % to 85 % of 1,8-cineole","Huile essentielle d'eucalyptus, type Australie, contenant une fraction volumique de 1,8-cinéole comprise entre 80 % et 85 %",2011-12-07,2,['71.100.60'],ISO/TC 54,9599,[8177],[80853],"['en','fr']",7,"<p>ISO 3065:2011 specifies certain characteristics of the oil of eucalyptus Australian type, containing a volume fraction of 80 % to 85 % of 1,8-cineole, in order to facilitate assessment of its quality.</p>"

8179,IS,,ISO 3066:1974,Duplicating machines — Registration,Duplicateurs — Tolérances de repérage,1974-08-01,1,['37.100.10'],ISO/IEC JTC 1,9599,,[8180],"['en','fr']",3,

8183,IS,,ISO 3069:1974,End suction centrifugal pumps — Dimensions of cavities for mechanical seals and for soft packing,Pompes centrifuges à aspiration en bout — Dimensions des logements de garnitures mécaniques et de garnitures à tresse,1974-07-01,1,['23.080'],ISO/TC 115,9599,,[8184],"['en','fr']",1,

4243,IS,,ISO 307:1977,Plastics — Determination of viscosity number of polyamides in dilute solution,Matières plastiques — Détermination de l'indice de viscosité des résines polyamides en solution diluée,1977-07-01,1,['83.080.20'],ISO/TC 61,9599,,"[4244,4245]","['en','fr']",5,

4244,IS,,ISO 307:1984,Plastics — Polyamides — Determination of viscosity number,Plastiques — Polyamides — Détermination de l'indice de viscosité,1984-05-01,2,['83.080.20'],ISO/TC 61/SC 9,9599,[4243],[4245],"['en','fr']",8,