Withdrawn and superseded ISO standards — page 96 of 246

8006,IS,,ISO 2958:1973,Road vehicles — Exterior protection for passenger cars,Véhicules routiers — Protection extérieure des voitures particulières,1973-09-01,1,['43.040.80'],ISO/TC 22,9599,,[84114],"['en','fr']",4,"<p>Specifies the characteristics as regards exterior protection. Applies to passenger cars with up to and including 9 designated seating positions, including that of the driver. The main objective is to fix protective devices at a common reference height, taking into account safety requirements and all aspects of vehicle design.</p>"

8007,IS,,ISO 2959:1973,Textiles — Woven fabric descriptions,Textiles — Désignation des tissus,1973-12-01,1,['59.080.30'],ISO/TC 38/SC 20,9599,,[59544],"['en','fr']",1,<p>A number of characteristic parameters for woven fabrics and their constituents at various stages of manufacture and processing for the purpose of fabric designation are given. It is not intended that the list of parameters should be exclusive and additional information can be given as required. Applicable to all woven fabrics except textile floor coverings.</p>

4223,IS,,ISO 296:1974,Machine tools — Self-holding tapers for tool shanks,Machines-outils — Cônes pour emmanchements d'outils à faible conicité,1974-06-01,1,['25.060.20'],ISO/TC 39,9599,,[4224],"['en','fr']",5,

8008,IS,,ISO 2960:1974,Textiles — Determination of bursting strength and bursting distension — Diaphragm method,Textiles — Détermination de la force d'éclatement et de la déformation à l'éclatement — Méthode à l'éclatomètre à membrane,1974-11-01,1,['59.080.01'],ISO/TC 38,9599,,[23374],"['en','fr']",2,

50579,IS,,ISO 29601:2011,Paints and varnishes — Corrosion protection by protective paint systems — Assessment of porosity in a dry film,Peintures et vernis — Anticorrosion par systèmes de peinture — Évaluation de la porosité d'un feuil sec,2011-04-07,1,['87.020'],ISO/TC 35/SC 14,9599,,[84789],"['en','fr','ru']",7,"<p>ISO 29601:2011 specifies procedures for detecting the presence of porosity in a protective paint system of any thickness on a steel or other metallic substrate. The procedures given are based on methods using two different types of test equipment, the choice of equipment depending on the dry film thickness. These procedures are only applicable to the testing of electrically non-

8010,IS,,ISO 2962:1974,Cheese and processed cheese products — Determination of phosphorus content (Reference method),Fromages et fromages fondus — Détermination de la teneur en phosphore (Méthode de référence),1974-02-01,1,['67.100.30'],ISO/TC 34/SC 5,9599,,[8011],"['en','fr']",2,

8011,IS,,ISO 2962:1984,Cheese and processed cheese products — Determination of total phosphorus content — Molecular absorption spectrometric method,Fromages et fromages fondus — Détermination de la teneur en phosphore total — Méthode par spectrométrie d'absorption moléculaire,1984-05-01,2,['67.100.30'],ISO/TC 34/SC 5,9599,[8010],[55780],"['en','fr']",3,"<p>Describes a procedure which includes the digestion of cheese by sulphuric acid and hydrogen peroxide, the addition of molybdate-ascorbic acid solution to form molybdenum blue, and the molecular absorption spectrometric measurement of the blue colour formed. Instead of wet digestion it is also possible to use dry ashing provided that the sa

45592,IS,,ISO 29621:2010,Cosmetics — Microbiology — Guidelines for the risk assessment and identification of microbiologically low-risk products,Cosmétiques — Microbiologie — Lignes directrices pour l'appréciation du risque et l'identification de produits à faible risque microbiologique,2010-06-04,1,['07.100.40'],ISO/TC 217,9599,,[68310],"['en','fr','ru']",10,"<p>The objective of ISO 29621:2010 is to help cosmetic manufacturers and regulatory bodies define those finished products that, based on a risk assessment, present a low risk of microbial contamination during production and/or use, and therefore, do not require the application of microbiological International Standards for cosmetics.</

8012,IS,,ISO 2963:1974,Cheese and processed cheese products — Determination of citric acid content (Reference method),Fromages et fromages fondus — Détermination de la teneur en acide citrique (Méthode de référence),1974-02-01,1,['67.100.30'],ISO/TC 34/SC 5,9599,,[8013],"['en','fr']",2,

8013,IS,,ISO 2963:1997,Cheese and processed cheese products — Determination of citric acid content — Enzymatic method,Fromages et fromages fondus — Détermination de la teneur en acide citrique — Méthode enzymatique,1997-03-13,2,['67.100.30'],ISO/TC 34/SC 5,9599,[8012],[41259],"['en','fr']",13,

8014,IS,,ISO 2964:1974,Aircraft — Tubing outside diameters and thicknesses — Metric dimensions,Aéronefs — Diamètres extérieurs et épaisseurs des tubes — Dimensions métriques,1974-02-01,1,['49.080'],ISO/TC 20,9599,,[8015],"['en','fr']",2,

8015,IS,,ISO 2964:1985,Aerospace — Tubing — Outside diameters and thicknesses — Metric dimensions,Aéronautique et espace — Tubes — Diamètres extérieurs et épaisseurs — Dimensions métriques,1985-03-21,2,['49.080'],ISO/TC 20/SC 10,9599,[8014],[86093],"['en','fr']",2,"<p>Includes the external diameters and thicknesses of tubes, for all metallic materials, to be selected for all uses in aircraft structural and system design. They shall be selected from those specified in the table. The tolerances shall be specified in the relevant standard appropriate to the material and intended application.</p>"

8016,IS,,ISO 2965:1979,Material used as cigarette papers — Determination of air permeability,Matériaux utilisés comme papiers à cigarette — Détermination de la perméabilité à l'air,1979-11-01,1,['65.160'],ISO/TC 126/SC 1,9599,,[8017],"['en','fr']",3,

8017,IS,,ISO 2965:1997,"Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having an oriented permeable zone — Determination of air permeability","Matériaux utilisés comme papier à cigarettes, pour le gainage des filtres et comme papier manchette, y compris les matériaux possédant une zone perméable orientée — Détermination de la perméabilité à l'air",1997-12-18,2,['65.160'],ISO/TC 126/SC 1,9599,[8016],"[38794,52253]","['en','fr']",19,

52253,IS,,ISO 2965:2009,"Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability — Determination of air permeability","Matériaux utilisés comme papier à cigarettes, pour le gainage des filtres et comme papier manchette, y compris les matériaux possédant une zone perméable discrète ou orientée et les matériaux à bandes de perméabilité diverses — Détermination de la perméabilité à l'air",2009-05-07,3,['65.160'],ISO/TC 126/SC 1,9599,[8017],[73026],"['en','fr']",27,"<p>ISO 2965:2009 specifies a method for the determination of air permeability (AP).</p><p>It i

8018,IS,,ISO 2966:1982,Cinematography — 16 mm motion-picture film perforated 8 mm Type S (1-3) and (1-4) — Cutting and perforating dimensions,Cinématographie — Film cinématographique 16 mm perforé 8 mm type S (1-3) et (1-4) — Dimensions de coupe et de perforation,1982-12-01,2,['37.060.20'],ISO/TC 36,9599,,[8019],"['en','fr']",3,

8022,IS,,ISO 2969:1977,Cinematography — Electro-acoustic response of motion-picture control rooms and indoor theatres — Specifications and measurements,Cinématographie — Réponse électro- acoustique des salles de contrôle et des salles d'exploitation cinématographiques — Spécifications et mesurages,1977-12-01,1,"['97.200.10','37.060.99']",ISO/TC 36,9599,,[8023],"['en','fr']",7,

8023,IS,,ISO 2969:1987,Cinematography — B-chain electro-acoustic response of motion-picture control rooms and indoor theatres — Specifications and measurements,Réponse électro-acoustique de la chaîne B des salles de contrôle et d'exploitation cinématographique — Spécifications et mesurages,1987-07-02,2,['37.060.99'],ISO/TC 36,9599,[8022],"[25426,39970,43646,35509]","['en','fr']",7,"<p>Specified are characteristics of the B-chain response of motion-picture studio dubbing theatres, review rooms and indoor theatres. They are intended to assist in the standardization of recording monitor and reproduction characteristics of the motion-picture sound in rooms with volumes of at least 150 m3. Not in

4225,IS,,ISO 297:1982,7/24 tapers for tool shanks for manual changing,Cônes d'emmanchement d'outils à conicité 7/24 pour changement manuel,1982-02-01,1,['25.060.20'],ISO/TC 39,9599,,[4226],"['en','fr']",5,

8025,IS,,ISO 2971:1976,Tobacco and tobacco products — Cigarettes and filters — Determination of nominal diameter,Tabac et produits du tabac — Cigarettes et filtres — Détermination du diamètre nominal,1976-06-01,1,['65.160'],ISO/TC 126/SC 1,9599,,[8026],"['en','fr']",6,

8026,IS,,ISO 2971:1987,Cigarettes and filters — Determination of nominal diameter — Pneumatic method,Cigarettes et filtres — Détermination du diamètre nominal — Méthode pneumatique,1987-08-27,2,['65.160'],ISO/TC 126/SC 1,9599,[8025],[23324],"['en','fr']",5,

23324,IS,,ISO 2971:1998,Cigarettes and filter rods — Determination of nominal diameter — Method using a laser beam measuring apparatus,Cigarettes et bâtonnets-filtres — Détermination du diamètre nominal — Méthode utilisant un instrument de mesure à faisceau laser,1998-07-30,3,['65.160'],ISO/TC 126/SC 1,9599,[8026],[54738],"['en','fr']",11,

8028,IS,,ISO 2974:1989,Road vehicles — High-pressure fuel injection pipe end-connections with 60 degrees female cone,Véhicules routiers — Raccords à cône femelle de 60 degrés pour lignes d'injection à haute pression,1989-09-21,2,['43.060.40'],ISO/TC 22,9599,,[8029],"['en','fr']",,

8029,IS,,ISO 2974:1990,Road vehicles — High-pressure fuel injection pipe end-connections with 60 degree female cone,Véhicules routiers — Raccords à cône femelle de 60 degrés pour lignes d'injection à haute pression,1990-10-11,3,['43.060.40'],ISO/TC 22,9599,[8028],[22120],"['en','fr']",3,

22120,IS,,ISO 2974:1994,Diesel engines — High-pressure fuel injection pipe end-connections with 60 degree female cone,Moteurs diesels — Raccords finaux à cône femelle de 60 degrés pour lignes d'injection de combustible haute pression,1994-07-07,4,['43.060.40'],ISO/TC 22,9599,[8029],[30504],"['en','fr']",3,

30504,IS,,ISO 2974:2000,Diesel engines — High-pressure fuel injection pipe end-connections with 60 degree female cone,Moteurs diesels — Raccords finaux à cône femelle de 60 degrés pour lignes d'injection de carburant haute pression,2000-04-13,5,['43.060.40'],ISO/TC 22,9599,[22120],[36626],['en'],5,

36626,IS,,ISO 2974:2005,Diesel engines — High-pressure fuel injection pipe end-connections with 60 degrees female cone,Moteurs diesels — Raccords finaux à cône femelle de 60 degrés pour lignes d'injection de combustible haute pression,2005-03-15,6,['43.060.40'],ISO/TC 22,9599,[30504],[52964],['en'],5,"<p>ISO 2974:2005 specifies the dimensional requirements of high-pressure pipe end-connections for diesel (compression-ignition) engine fuel injection equipment.</p><p>It is applicable to externally threaded end-connections of types 1 and 2 having a 60° female cone, as well as to the pipe end assemblies of high-pressure fuel injection pipes with outside diameters of up to and including 12 mm.</p

52964,IS,,ISO 2974:2013,Diesel engines — 60 degree female cones for high-pressure fuel injection components,Moteurs diesels — Raccords finaux à cône femelle de 60 degrés pour lignes d'injection de combustible haute pression,2013-02-22,7,['43.060.40'],ISO/TC 22/SC 34,9599,[36626],[69500],['en'],9,"<p>ISO 2974:2013 specifies the dimensional requirements of end-connections for high-pressure fuel injection equipment components used on diesel (compression-ignition) engines.</p><p>It is applicable to externally threaded 60° female cones and intended for use with high-pressure fuel injection pipe assemblies with tube outside diameters of</p><ul><li>up to and including 12 mm for integral female cone

69500,IS,,ISO 2974:2016,Diesel engines — 60° female cones for high-pressure fuel injection components,Moteurs diesels — Raccords finaux à cône femelle de 60° pour lignes d'injection de combustible haute pression,2016-11-25,8,['43.060.40'],ISO/TC 22/SC 34,9599,[52964],[74897],['en'],9,"<p>ISO 2974:2016 specifies the dimensional requirements of end-connections for high-pressure fuel injection equipment components used on diesel (compression-ignition) engines.</p><p>It is applicable to externally threaded 60° female cones (see Figures 1, 2, 5, and 6) and intended for use with high-pressure fuel injection pipe assemblies with tube outside diameters of</p><p>- up to and including 12 mm for i

8035,IS,,ISO 2976:1973,Abrasive belts — Selection of width/length combinations,Bandes abrasives — Sélection des combinaisons largeurs x longueurs,1973-11-01,1,['25.100.70'],ISO/TC 29/SC 5,9599,,[36550],"['en','fr']",1,

45664,IS,,ISO 29766:2008,Thermal insulating products for building applications — Determination of tensile strength parallel to faces,Produits isolants thermiques destinés aux applications du bâtiment — Détermination de la résistance à la traction parallèlement aux faces,2008-10-29,1,['91.100.60'],ISO/TC 163/SC 1,9599,,[77895],['en'],5,<p>ISO 29766:2008 specifies the equipment and procedures for determining the tensile strength of a product parallel to its faces. ISO 29766:2008 is applicable to thermal insulating products.</p><p>ISO 29766:2008 can be used to determine whether the product has sufficient strength to withstand stresses during transportation and application.</p>

45665,IS,,ISO 29767:2008,Thermal insulating products for building applications — Determination of short-term water absorption by partial immersion,Produits isolants thermiques destinés aux applications du bâtiment — Détermination de l'absorption d'eau à court terme par immersion partielle,2008-10-29,1,['91.100.60'],ISO/TC 163/SC 1,9599,,[69471],['en'],6,<p>ISO 29767:2008 specifies the equipment and procedures for determining the short-term water absorption of specimens by partial immersion. ISO 29767:2008 is applicable to thermal insulating products.</p>

64993,IS,Amd,ISO 29767:2008/Amd 1:2014,Thermal insulating products for building applications — Determination of short-term water absorption by partial immersion — Amendment 1,Produits isolants thermiques destinés aux applications du bâtiment — Détermination de l'absorption d'eau à court terme par immersion partielle — Amendement 1,2014-11-20,1,['91.100.60'],ISO/TC 163/SC 1,9599,,[69471],['en'],3,

45666,IS,,ISO 29768:2008,Thermal insulating products for building applications — Determination of linear dimensions of test specimens,Produits isolants thermiques destinés aux applications du bâtiment — Détermination des dimensions linéaires des éprouvettes d'essai,2008-10-30,1,['91.100.60'],ISO/TC 163/SC 1,9599,,[77896],['en'],6,<p>ISO 29768:2008 specifies the characteristics and choice of measuring equipment and the procedure for determining the linear dimensions of test specimens that are taken from thermal insulating products. The procedures for measuring the dimensions of full-size products are specified in ISO 29465 and ISO 29466.</p>

8036,IS,,ISO 2977:1974,Petroleum products and hydrocarbon solvents — Determination of aniline point and mixed aniline point,Produits pétroliers et solvants hydrocarbonés — Détermination du point d'aniline et du point d'aniline en mélange,1974-07-01,1,['75.080'],ISO/TC 28,9599,,[8037],"['en','fr']",7,

8037,IS,,ISO 2977:1989,Petroleum products and hydrocarbon solvents — Determination of aniline point and mixed aniline point,Produits pétroliers et solvants hydrocarbonés — Détermination du point d'aniline et du point d'aniline en mélange,1989-06-29,2,['75.080'],ISO/TC 28,9599,[8036],[26481],"['en','fr']",10,

21205,IS,Cor,ISO 2977:1989/Cor 1:1992,Petroleum products and hydrocarbon solvents — Determination of aniline point and mixed aniline point — Technical Corrigendum 1,Produits pétroliers et solvants hydrocarbonés — Détermination du point d'aniline et du point d'aniline en mélange — Rectificatif technique 1,1992-10-08,2,['75.080'],ISO/TC 28,9599,,[26481],"['en','fr']",1,

45668,IS,,ISO 29770:2008,Thermal insulating products for building applications — Determination of thickness for floating-floor insulating products,Produits isolants thermiques destinés aux applications du bâtiment — Détermination de l'épaisseur des produits d'isolation pour sol flottant,2008-10-30,1,['91.100.60'],ISO/TC 163/SC 1,9599,,[77897],['en'],5,<p>ISO 29770:2008 specifies the equipment and procedures for determining the thickness of thermal insulating products for impact sound insulation in floating floor applications.</p>

45682,IS,,ISO 29782:2008,Prostheses and orthoses — Factors to be considered when specifying a prosthesis for a person who has had a lower limb amputation,Prothèses et orthèses — Facteurs à prendre en considération lors de la spécification d'une prothèse pour une personne ayant subi une amputation d'un membre inférieur,2008-11-17,1,['11.040.40'],ISO/TC 168,9599,,[77460],['en'],6,<p>ISO 29782:2008 describes the factors to be considered when specifying a prosthesis for a person who has had a lower limb amputation.</p>

45687,IS,,ISO 29802:2009,"All terrain (AT) tyres and rims — Symbol marked pneumatic tyres on 5 degrees tapered rims — Designation, dimension, marking and load ratings","Pneumatiques et jantes tout terrain — Pneumatiques marqués par un symbole pour jantes à repos de talon conique à 5 degrés — Désignation, dimensions, marquage et coefficients de charge",2009-10-19,1,['83.160.10'],ISO/TC 31/SC 10,9599,,[66255],"['en','fr']",12,"<p>ISO 29802:2009 specifies the designations, dimensions, markings and load ratings of pneumatic tyres primarily intended for all terrain vehicles (ATV). It also specifies the designation, marking and contours of rims.</p><p>The tyres are based on the following parameter

20519,IS,,ISO 2982-1:1995,Rolling bearings — Accessories — Part 1: Tapered sleeves — Dimensions,Roulements — Accessoires — Partie 1: Manchons coniques — Dimensions,1995-08-24,1,['21.100.20'],ISO/TC 4,9599,[3913],[60355],"['en','fr']",8,"<p>Specifies boundary dimensions of adapter sleeves and withdrawal sleeves for rolling bearings and the outside diameter of suitable locknuts. Cancels and replaces ISO 113-1(1979), which has been technically revised.</p>"

8038,IS,,ISO 2982:1972,"Rolling bearings — Locknuts, narrow series, and lockwashers with straight inner tab","Roulements — Écrous à encoches, série étroite, et rondelles-frein à languette intérieure droite",1972-12-01,1,['21.100.20'],ISO/TC 4,9599,,[20516],"['en','fr']",2,

20516,IS,,ISO 2982-2:1995,Rolling bearings — Accessories — Part 2: Locknuts and locking devices — Dimensions,Roulements — Accessoires — Partie 2: Écrous à encoches et dispositifs de blocage — Dimensions,1995-08-24,1,['21.100.20'],ISO/TC 4,9599,[8038],[32056],"['en','fr']",5,

32056,IS,,ISO 2982-2:2001,Rolling bearings — Accessories — Part 2: Locknuts and locking devices — Dimensions,Roulements — Accessoires — Partie 2: Écrous à encoches et dispositifs de blocage — Dimensions,2001-04-25,2,['21.100.20'],ISO/TC 4,9599,[20516],[60131],"['en','fr']",8,

45693,IS,,ISO 29821-1:2011,Condition monitoring and diagnostics of machines — Ultrasound — Part 1: General guidelines,Surveillance des conditions et diagnostic d'état des machines — Ultrasons — Partie 1: Lignes directrices générales,2011-04-15,1,['17.160'],ISO/TC 108/SC 5,9599,,[71196],['en'],17,"<p>ISO 29821-1:2011 outlines methods and requirements for carrying out condition monitoring and diagnostics of machines using airborne and structure-borne ultrasound. It provides measurement, data interpretation, and assessment criteria. This technique is typically carried out on operating machinery under a range of conditions and environments. This is a passive technique that detects acoustic anoma

50509,IS,,ISO 29821-2:2016,Condition monitoring and diagnostics of machines — Ultrasound — Part 2: Procedures and validation,Surveillance des conditions et diagnostic d'état des machines — Ultrasons — Partie 2: Modes opératoires et validation,2016-04-04,1,['17.160'],ISO/TC 108/SC 5,9599,,[71196],['en'],9,"<p>ISO 29821-2:2016</p><p>- provides guidance on establishing severity assessment criteria for anomalies identified by airborne (AB) and structure borne (SB) ultrasound,</p><p>- outlines methods and requirements for carrying out ultrasonic examination of machines, including safety recommendations and sources of error, and</p><p>- provides information relative to data interpre

71196,IS,,ISO 29821:2018,"Condition monitoring and diagnostics of machines — Ultrasound — General guidelines, procedures and validation",Surveillance des conditions et diagnostic d'état des machines — Ultrasons,2018-01-25,1,['17.160'],ISO/TC 108/SC 5,9599,"[45693,50509]",[88266],['en'],24,"<p>ISO 29821:2018</p><p>- gives guidelines for establishing severity assessment criteria for anomalies identified by airborne (AB) and structure-borne (SB) ultrasound,</p><p>- specifies methods and requirements for carrying out ultrasonic examination of machines, including safety recommendations and sources of error, and</p><p>- provides information relative to data interpretation, assessmen

45702,IS,,ISO 29842:2011,Sensory analysis — Methodology — Balanced incomplete block designs,Analyse sensorielle — Méthodologie — Plans de présentation en blocs incomplets équilibrés,2011-07-06,1,['67.240'],ISO/TC 34/SC 12,9599,,[87449],"['en','fr','ru']",19,<p>ISO 29842:2011 specifies a method for the application of balanced incomplete block designs to sensory descriptive and hedonic tests.</p><p>ISO 29842:2011 applies when the number of test samples exceeds the number of evaluations that an assessor can perform reliably in a single session.</p><p>ISO 29842:2011 also specifies the fundamental characteristics of balanced incomplete block designs and establishes guidelines for their applicatio

64716,IS,Amd,ISO 29842:2011/Amd 1:2015,Sensory analysis — Methodology — Balanced incomplete block designs — Amendment 1,Analyse sensorielle — Méthodologie — Plans de présentation en blocs incomplets équilibrés — Amendement 1,2015-03-10,1,['67.240'],ISO/TC 34/SC 12,9599,,[87449],['en'],1,

45716,IS,,ISO 29862:2007,Self adhesive tapes — Determination of peel adhesion properties,Rubans auto-adhésifs — Détermination des caractéristiques du pouvoir adhésif linéaire,2007-11-29,1,['83.180'],ISO/TC 61/SC 11,9599,,[70311],"['en','fr']",12,<p>ISO 29862:2007 specifies a series of methods for the determination of the peel adhesion properties of self-adhesive tapes.</p>

70311,IS,,ISO 29862:2018,Self adhesive tapes — Determination of peel adhesion properties,Rubans auto-adhésifs — Détermination des caractéristiques du pouvoir adhésif linéaire,2018-05-11,2,['83.180'],ISO/TC 61/SC 11,9599,[45716],[88050],"['en','fr']",14,<p>This document specifies a series of methods for the determination of peel adhesion properties of self adhesives tapes.</p><p>This document contains:</p><p>— Method 1: Self adhesive tapes ? Measurement of peel adhesion from stainless steel at an angle of 180°;</p><p>— Method 2: Self adhesive tapes ? Measurement of peel adhesion from its own backing at an angle of 180°;</p><p>— Method 3: Self adhesive tapes ? Measur

45717,IS,,ISO 29863:2007,Self adhesive tapes — Measurement of static shear adhesion,Rubans auto-adhésifs — Mesurage du pouvoir adhésif tangentiel,2007-11-29,1,['83.180'],ISO/TC 61/SC 11,9599,,[70312],"['en','fr']",12,<p>ISO 29863:2007 specifies a series of methods for the determination of the ability of a pressure-sensitive tape to remain adhered under a constant load applied parallel to the surfaces of the tape and substrate.</p>

45718,IS,,ISO 29864:2007,Self adhesive tapes — Measurement of breaking strength and elongation at break,Rubans auto-adhésifs — Mesurage de la résistance à la rupture et de l'allongement à la rupture,2007-11-29,1,['83.180'],ISO/TC 61/SC 11,9599,,[70313],"['en','fr']",5,<p>ISO 29864:2007 specifies methods to measure the breaking strength and elongation at break of a self-adhesive tape when it is subjected to a tensile force sufficient to cause it to break.</p>

4228,IS,,ISO 299:1973,Machine tool tables — T-slots and corresponding bolts,Tables de machines-outils — Rainures à T et boulons correspondants,1973-12-01,1,['25.060.20'],ISO/TC 39,9599,,[4229],"['en','fr']",3,

45734,IS,,ISO 29903:2012,Guidance for comparison of toxic gas data between different physical fire models and scales,Lignes directrices pour la comparaison de données de gaz toxiques entre divers modèles et échelles de feu physiques,2012-12-06,1,['13.220.01'],ISO/TC 92/SC 3,9599,,[75768],"['en','fr']",26,"<p>ISO 29903:2012 provides principles for characterizing the measured production of toxic gases from a laboratory fire test and provides bases for comparing the results between different types and scales of such tests. It also includes consideration of the uncertainties in the gas determinations. The combined uncertainty is a key factor in the ability to establish similarity or difference o

45753,IS,,ISO 29945:2009,Refrigerated non-petroleum-based liquefied gaseous fuels — Dimethylether (DME) — Method of manual sampling onshore terminals,Combustibles gazeux non pétroliers liquéfiés réfrigérés — Diméthyléther (DME) — Méthode d'échantillonnage manuel sur des terminaux à terre,2009-11-05,1,['75.180.30'],ISO/TC 28/SC 5,9599,,[69288],"['en','fr']",10,"<p>ISO 29945:2009 specifies a manual sampling method for refrigerated liquefied DME at terminals in both loading and unloading ports. ISO 29945:2009 also specifies detailed precautions to ensure safety during sampling work. However, safety measures, proposed for equipment being used for sampling, such as sampling lines and sample cylin

45765,IS,,ISO 29981:2010,Milk products — Enumeration of presumptive bifidobacteria — Colony count technique at 37 degrees C,Produits laitiers — Dénombrement des bifidobacteria présumés — Technique par comptage des colonies à 37 degrés C,2010-01-19,1,['67.100.01'],ISO/TC 34/SC 5,9599,,[79391],"['en','ru']",17,"<p>ISO 29981|IDF 220:2010 specifies a method for the selective enumeration of presumptive bifidobacteria in milk products by using a colony count technique at 37 °C under anaerobic conditions.</p><p>The method is applicable to milk products such as fermented and non-fermented milks, milk powders, infant formulae, and starter cultures where these microorganisms are present and viable, an

68341,IS,,ISO 29988-1:2018,Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Matériaux à base de polyoxyméthylène (POM) pour moulage et extrusion — Partie 1: Système de désignation et base de spécification,2018-04-20,1,['83.080.20'],ISO/TC 61/SC 9,9599,[40594],[77532],"['en','fr']",8,"<p>ISO 29988-1:2018 establishes a system of designation for polyoxymethylene (POM) thermoplastic materials, which can be used as the basis for specifications.</p><p>The types of polyoxymethylene (POM) materials are differentiated from each other by a classification system based on appropriate levels of the following designat

53392,IS,,ISO 29990:2010,Learning services for non-formal education and training — Basic requirements for service providers,Services de formation dans le cadre de l'éducation et de la formation non formelles — Exigences de base pour les prestataires de services,2010-08-30,1,['03.180'],ISO/TC 232,9599,,"[70357,66266]","['en','fr']",18,<p>ISO 29990:2010 specifies basic requirements for providers of learning services in non-formal education and training.</p>

54660,IS,,ISO 29991:2014,Language learning services outside formal education — Requirements,Services de formation en langues en dehors de l'éducation formelle — Exigences,2014-03-17,1,['03.180'],ISO/TC 232,9599,,[76819],"['en','fr','ru']",13,"<p>ISO 29991:2014 specifies requirements for language learning services outside formal education. These include any language learning services that are addressed to language learners themselves, as well as to interested parties that are acquiring the services for the benefit of learners. The key features of any such service are that the goals of learning are defined and evaluated, and that it involves interaction with the learner. The instruction can be

54466,IS,,ISO 30002:2010,Ships and marine technology — Ship recycling management systems — Guidelines for selection of ship recyclers (and pro forma contract),Navires et technologie maritime — Systèmes de management de recyclage pour navires — Lignes directrices pour la sélection des recycleurs pour navires (et modèle de contrat),2010-04-12,1,['47.020.01'],ISO/TC 8,9599,[45672],[61204],['en'],4,"<p>ISO 30002:2010 provides guidance to shipowners in the selection of a ship recycling facility.</p><p>In order to ensure as far as possible that vessels are recycled in a safe and environmentally sound manner, shipowners need to consider to which ship recycling facilities they wish to sell their sh

55907,IS,,ISO 30005:2012,Ships and marine technology — Ship recycling management systems — Information control for hazardous materials in the manufacturing chain of shipbuilding and ship operations,Navires et technologie maritime — Systèmes de management du recyclage des navires — Contrôle des informations sur les matières dangereuses intervenant dans la chaîne de construction du navire et durant le service du navire,2012-05-15,1,['47.020.01'],ISO/TC 8,9599,[45675],[82971],"['en','ru']",25,"<p>ISO 30005:2012 provides guidance for the management, communication, and maintenance of information in an effective, standardized, and compatible manner in accordance with the requirements of the Hong K

8051,IS,,ISO 3001:1978,Plastics — Epoxide compounds — Determination of epoxide equivalent,Plastiques — Compositions époxydiques — Détermination de l'équivalent époxyde,1978-09-01,2,['83.080.10'],ISO/TC 61/SC 12,9599,,[27203],"['en','fr']",3,

27203,IS,,ISO 3001:1997,Plastics — Epoxy compounds — Determination of epoxy equivalent,Plastiques — Compositions époxydiques — Détermination de l'équivalent époxyde,1997-03-06,3,['83.080.10'],ISO/TC 61/SC 12,9599,[8051],[29610],"['en','fr']",4,

45769,IS,,ISO 30011:2010,Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry,Air des lieux de travail — Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie de masse avec plasma à couplage inductif,2010-09-24,1,['13.040.30'],ISO/TC 146/SC 2,9599,,[84118],"['en','fr']",34,"<p>ISO 30011:2010 specifies a procedure for the use of quadrupole inductively coupled plasma mass spectrometry (ICP‑MS) for analysing test solutions prepared from samples of airborne particulate matter collected as specified in ISO 15202‑1. Method development, performance checks, and a routine

45786,IS,,ISO 30023:2010,Textiles — Qualification symbols for labelling workwear to be industrially laundered,Textiles — Symboles de qualification pour l'étiquetage des vêtements de travail destinés à être lavés de manière industrielle,2010-11-04,1,['59.080.01'],ISO/TC 38/SC 2,9599,,[79187],"['en','fr']",10,"<p>ISO 30023:2010</p><ul><li>establishes a system of graphical symbols, intended for use in the marking of workwear articles and protective clothing providing information on the suitability for professional industrial laundering using ISO 15797, and</li><li>specifies the use of these symbols in qualifying garments as potentially suitable for industrial laundering .</li></ul><p>The follow

45787,IS,,ISO 30024:2009,Animal feeding stuffs — Determination of phytase activity,Aliments des animaux — Détermination de l'activité phytasique,2009-07-02,1,['65.120'],ISO/TC 34/SC 10,9599,,[80848],"['en','fr']",12,<p>ISO 30024:2009 specifies the determination of phytase activity in feed samples.</p><p>The method does not distinguish between phytase added as a feed additive and endogenous phytase already present in the feed materials.</p><p>The method cannot be used to evaluate or compare the <i>in vivo</i> efficacy of the phytase product. It is not a predictive method of the <i>in vivo</i> efficacy of phytases present on the market as they can develop different <i>in vivo</i> efficacy per

8059,IS,,ISO 3003:1974,Dried-milk borers,Sondes à lait sec,1974-03-01,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[4916],"['en','fr']",2,

8060,IS,,ISO 3004-1:1979,Hermetically sealed metal containers for food and drinks — Part 1: Round open-top general purpose food cans,"Récipients métalliques étanches pour denrées alimentaires et boissons — Partie 1: Boîtes à conserves alimentaires, rondes, serties pour usage général",1979-02-01,2,['55.120'],ISO/TC 52,9599,,[8061],"['en','fr']",2,

8063,IS,Amd,ISO 3004-1:1979/Amd 1:1981,Hermetically sealed metal containers for food and drinks — Part 1: Round open-top general purpose food cans — Amendment 1,"Récipients métalliques étanches pour denrées alimentaires et boissons — Partie 1: Boîtes à conserves alimentaires, rondes, serties pour usage général — Amendement 1",1981-04-01,2,['55.120'],ISO/TC 52,9599,,[8061],['en'],1,

8061,IS,,ISO 3004-1:1986,Light gauge metal containers — Capacities and related cross-sections — Part 1: Open-top cans for general food,Récipients métalliques légers — Capacités et sections transversales associées — Partie 1: Boîtes serties à conserves alimentaires pour usage général,1986-10-30,3,['55.120'],ISO/TC 52,9599,"[8063,8060]","[18748,18749,20081,19973,20082]",['en'],2,

8064,IS,,ISO 3004-2:1979,Hermetically sealed metal containers for food and drinks — Part 2: Food cans for meat and products containing meat for human consumption,Récipients métalliques étanches pour denrées alimentaires et boissons — Partie 2: Boîtes à conserves alimentaires pour viandes et produits contenant de la viande destinés à l'alimentation humaine,1979-04-01,1,['55.120'],ISO/TC 52,9599,,[8065],"['en','fr']",3,

8065,IS,,ISO 3004-2:1989,Light gauge metal containers — Capacities and related cross-sections — Part 2: Open-top cans for meat and products containing meat for human consumption,Récipients métalliques légers — Capacités et sections transversales associées — Partie 2: Boîtes serties pour viandes et produits contenant de la viande destinée à l'alimentation humaine,1989-06-15,2,['55.120'],ISO/TC 52,9599,[8064],"[18748,18749,20081,19973,20082]","['en','fr']",3,

8067,IS,,ISO 3004-3:1981,Hermetically sealed metal containers for food and drinks — Part 3: Cans for drinks,Récipients métalliques étanches pour denrées alimentaires et boissons — Partie 3: Boîtes pour boissons,1981-04-01,1,['55.120'],ISO/TC 52,9599,,[8068],"['en','fr']",3,

8068,IS,,ISO 3004-3:1986,Light gauge metal containers — Capacities and related cross-sections — Part 3: Open-top cans for drinks,Récipients métalliques légers — Capacités et sections transversales associées — Partie 3: Boîtes serties pour boissons,1986-10-30,2,['55.120'],ISO/TC 52,9599,[8067],"[18748,18749,20081,19973,20082]","['en','fr']",3,

8070,IS,,ISO 3004-4:1980,Hermetically sealed metal containers for food and drinks — Part 4: Cans for edible oil,Récipients métalliques étanches pour denrées alimentaires et boissons — Partie 4: Boîtes pour huiles alimentaires,1980-09-01,1,['55.120'],ISO/TC 52,9599,,[8071],"['en','fr']",2,

8071,IS,,ISO 3004-4:1986,Light gauge metal containers — Capacities and related cross-sections — Part 4: Open-top cans for edible oil,Récipients métalliques légers — Capacités et sections transversales associées — Partie 4: Boîtes serties pour huiles alimentaires,1986-10-30,2,['55.120'],ISO/TC 52,9599,[8070],"[18748,18749,20081,19973,20082]","['en','fr']",2,

8073,IS,,ISO 3004-5:1988,Light gauge metal containers — Capacities and related cross-sections — Part 5: Open-top cans for fish and other fishery products,Récipients métalliques légers — Capacités et sections transversales associées — Partie 5: Boîtes serties pour poissons et autres produits de la pêche,1988-06-23,1,['55.120'],ISO/TC 52,9599,"[14489,14158]","[18748,18749,20081,19973,20082]","['en','fr']",4,

8075,IS,,ISO 3004-6:1986,Light gauge metal containers — Capacities and related cross-sections — Part 6: Open-top cans for milk,Récipients métalliques légers — Capacités et sections transversales associées — Partie 6: Boîtes serties pour le lait,1986-10-30,1,['55.120'],ISO/TC 52,9599,[7710],"[18748,18749,20081,19973,20082]","['en','fr']",2,

45797,IS,,ISO 30042:2008,"Systems to manage terminology, knowledge and content — TermBase eXchange (TBX)","Systèmes de gestion de la terminologie, de la connaissance et du contenu — TermBase eXchange (TBX)",2008-12-08,1,"['35.240.30','01.020']",ISO/TC 37/SC 3,9599,,[62510],['en'],91,"<p>The TBX framework defined by ISO 30042:2008 is designed to support various types of processes involving terminological data, including analysis, descriptive representation, dissemination, and interchange (exchange), in various computer environments. The primary purpose of TBX is for interchange of terminological data. It is limited in its ability to represent presentational markup. Intended application areas

8078,IS,,ISO 3006:1976,Road vehicles — Passenger car wheels — Test method,Véhicules routiers — Roues pour voitures particulières — Méthodes d'essai,1976-12-01,2,['43.040.50'],ISO/TC 22,9599,,[8079],"['en','fr']",2,

8079,IS,,ISO 3006:1995,Passenger car road wheels — Test methods,Roues pour voitures particulières — Méthodes d'essai,1995-02-02,3,['43.040.50'],ISO/TC 22,9599,[8078],[39420],"['en','fr']",5,<p>Specifies two laboratory methods for testing certain essential strength characteristics of wheels intended for road use on passenger cars as defined in ISO 3833. The test methods are a dynamic cornering fatigue test and a dynamic radial fatigue test.</p>

39420,IS,,ISO 3006:2005,Road vehicles — Passenger car wheels for road use — Test methods,Véhicules routiers — Roues pour voitures particulières pour utilisation sur routes — Méthodes d'essai,2005-03-02,4,['43.040.50'],ISO/TC 22/SC 33,9599,[8079],"[60208,42938]","['en','fr','ru']",6,<p>ISO 3066:2005 specifies two laboratory methods for testing certain essential fatigue strength characteristics of wheels intended for road use on passenger cars as defined in ISO 3833.</p><p>The test methods are</p><ul><li>dynamic cornering fatigue test;</li><li>dynamic radial fatigue test.</li></ul>

8080,IS,,ISO 3007:1974,Petroleum products — Determination of vapour pressure — Reid method,Produits pétroliers — Détermination de la pression de vapeur — Méthode Reid,1974-11-01,1,['75.080'],ISO/TC 28,9599,,[8081],"['en','fr']",9,

8081,IS,,ISO 3007:1986,Petroleum products — Determination of vapour pressure — Reid method,Produits pétroliers — Détermination de la pression de vapeur — Méthode Reid,1986-05-22,2,['75.080'],ISO/TC 28,9599,[8080],[8082],"['en','fr']",13,

73900,IS,,ISO 3008-1:2019,Fire resistance tests — Door and shutter assemblies — Part 1: General requirements,Essais de résistance au feu — Assemblages de portes et volets — Partie 1: Exigences générales,2019-01-30,1,"['13.220.50','91.060.50']",ISO/TC 92/SC 2,9599,[45472],[88276],['en'],52,"<p>This document, used in conjunction with ISO 834-1, specifies a method for determining the fire resistance of door and shutter assemblies designed primarily for installation within openings incorporated in vertical separating elements, such as</p><p>— hinged and pivoted doors,</p><p>— horizontally sliding and vertically sliding doors, including articulated sliding doors and sectional do

8083,IS,,ISO 3008:1976,Fire-resistance tests — Door and shutter assemblies,Essais de résistance au feu — Portes et fermetures,1976-04-01,1,"['13.220.50','91.060.50']",ISO/TC 92,9599,,"[25983,35265]","['en','fr']",11,<p>Includes methodes for testing and evaluating. Does not give a procedure of classification.</p>

8084,IS,Amd,ISO 3008:1976/Amd 1:1984,Fire-resistance tests — Door and shutter assemblies — Amendment 1,Essais de résistance au feu — Portes et fermetures — Amendement 1,1984-10-01,1,['13.220.50'],ISO/TC 92/SC 2,9599,,[35265],"['en','fr']",2,"<p>Gives deletions and substitutions of clauses 8., 8.1., 8.2., A.8., A.9., A.10., B.0. and B.3.</p>"

59989,IS,,ISO 3008-2:2014,Fire-resistance tests — Part 2: Lift landing door assemblies,Essais de résistance au feu — Partie 2: Assemblage de porte palière d'ascenseur,2014-04-09,1,"['13.220.50','91.060.50']",ISO/TC 92/SC 2,9599,,[69092],"['en','fr']",24,"<p>ISO 3008-2:2014 specifies the method of the test for determining the fire resistance of the lift landing door assemblies which can be exposed to fire from the landing side. The procedure applies to all the types of lift landing door assemblies used as a means of access to the lifts in buildings and which are intended to provide a fire barrier to the spread of fire via the lift well.</p><p>The procedure allows for the measurement of integr

35265,IS,,ISO 3008:2006,Fire resistance tests — Door and shutter assemblies,Essais de résistance au feu — Assemblages porte et volet,2006-10-31,2,"['13.220.50','91.060.50']",ISO/TC 92/SC 2,9599,"[8084,8083]",[45472],['en'],48,"<p>ISO 3008:2006 specifies a method for determining the fire resistance of door and shutter assemblies designed primarily for installation within openings incorporated in vertical separating elements, such as:</p><ul><li>hinged and pivoted doors;</li><li>horizontally-sliding and vertically-sliding doors including articulated sliding doors, sectional doors;</li><li>steel single skin folding shutters (uninsulated);</li><li>other sliding folding doors;</li><li>tilting doo

45472,IS,,ISO 3008:2007,Fire-resistance tests — Door and shutter assemblies,Essais de résistance au feu — Assemblages porte et volet,2007-09-13,3,"['13.220.50','91.060.50']",ISO/TC 92/SC 2,9599,[35265],"[73729,73900]",['en'],49,"<p>ISO 3008:2007, used in conjunction with ISO 834-1, specifies a method for determining the fire resistance of door and shutter assemblies designed primarily for installation within openings incorporated in vertical separating elements, such as hinged and pivoted doors, horizontally sliding and vertically sliding doors, including articulated sliding doors and sectional doors, steel single-skin folding shutters (un-insulated), other sliding, folding doors, tilting do

8085,IS,,ISO 3009:1976,Fire-resistance tests — Glazed elements,Essais de résistance au feu — Eléments en verre,1976-09-01,1,"['81.040.20','13.220.50']",ISO/TC 92,9599,,"[25598,37415]","['en','fr']",8,"<p>Specifies methods of testing and assessing non load bearing, vertical glazed elements of construction which are intended either to provide, wholly or in part, separation between different areas in a building, or to form part of the external walls. It is applicable to glazed separating elements such as windows, walls of glass blocks and other light-transmitting assemblies.</p>"

8086,IS,Amd,ISO 3009:1976/Amd 1:1984,Fire-resistance tests — Glazed elements — Amendment 1,Essais de résistance au feu — Eléments en verre — Amendement 1,1984-10-01,1,"['81.040.20','13.220.50']",ISO/TC 92/SC 2,9599,,[37415],"['en','fr']",1,"<p>Gives deletions and substitutions of the clauses 8., 8.1., 8.2., A.4., A.5., B.0. and B.3.</p>"

4233,IS,,ISO 301:1981,Zinc alloy ingots intended for casting,Alliages de zinc en lingots destinés à la fonderie,1981-05-01,1,['77.120.60'],ISO/TC 18,9599,,"[40410,32417]","['en','fr']",1,"<p>The ingots shall have a mass of 5 to 20 kg, shall be of a shape which permits stacking, may include notches which allow them to be broken up if necessary into small pieces and may include cast-on feet. The marking is specified. Designations and chemical compositions of ingots are given in a table.</p>"

8087,IS,,ISO 3010:1988,Bases for design of structures — Seismic actions on structures,Bases du calcul des constructions — Actions sismiques sur les structures,1988-07-07,1,"['91.080.01','91.120.25']",ISO/TC 98/SC 3,9599,,[25368],"['en','fr']",8,"<p>Presents basic methods for the determination of seismic actions on structures. Specifies methods of evaluating seismic actions for the earthquake-resistant design of buildings, towers, chimneys, and similar structures. Most of the principles are applicable also to stuctures such as bridges, dams, harbour installations, tunnels, fuel storage tanks, chemical plants, conventional power plants excluding nuclear power plants.</p>"

25368,IS,,ISO 3010:2001,Basis for design of structures — Seismic actions on structures,Bases du calcul des constructions — Actions sismiques sur les structures,2001-12-20,2,"['91.080.01','91.120.25']",ISO/TC 98/SC 3,9599,[8087],[63217],['en'],36,

8088,IS,,ISO 3011:1981,Rubber or plastics coated fabrics — Determination of resistance to ozone cracking under static conditions,Supports textiles revêtus de caoutchouc ou de plastique — Détermination de la résistance aux craquelures dues à l'ozone dans des conditions statiques,1981-12-01,2,['59.080.40'],ISO/TC 45,9599,,[20150],"['en','fr']",2,

20150,IS,,ISO 3011:1997,Rubber- or plastics-coated fabrics — Determination of resistance to ozone cracking under static conditions,Supports textiles revêtus de caoutchouc ou de plastique — Détermination de la résistance aux craquelures dues à l'ozone dans des conditions statiques,1997-04-10,3,['59.080.40'],ISO/TC 45/SC 4,9599,[8088],[77550],"['en','fr']",4,

8089,IS,,ISO 3012:1974,Aviation turbine fuels — Determination of mercaptan sulphur — Amperometric and potentiometric methods,Carburants aviation pour turbines — Dosage du soufre sous forme de mercaptans — Méthodes ampérométrique et potentiométrique,1974-06-01,1,['75.160.20'],ISO/TC 28,9599,,[8090],"['en','fr']",6,

8090,IS,,ISO 3012:1991,"Gasoline, kerosine and distillate fuels — Determination of mercaptan sulfur — Potentiometric method","Essence, pétroles lampants et fuel-oils distillés — Dosage du soufre sous forme de mercaptans — Méthode potentiométrique",1991-04-25,2,['75.160.20'],ISO/TC 28,9599,[8089],[27546],"['en','fr']",5,