Withdrawn and superseded ISO standards — page 91 of 246

7681,IS,,ISO 2713:1973,"Copper and copper alloys — Rockwell hardness test (B, F and G scales)","Cuivre et alliages de cuivre — Essai de dureté Rockwell (Échelles B, F, G)",1973-11-01,1,['77.040.10'],ISO/TC 164/SC 3,9599,,[12889],"['en','fr']",5,

7682,IS,,ISO 2714:1980,Liquid hydrocarbons — Volumetric measurement by displacement meter systems other than dispensing pumps,Hydrocarbures liquides — Mesurage volumétrique au moyen de compteurs à chambre mesureuse autres que ceux des ensembles de mesurage routiers,1980-10-01,1,['75.180.30'],ISO/TC 28/SC 2,9599,,"[22421,65965]","['en','fr']",8,"<p>Gives the characteristics of such equipment and rules for systematically applying appropriate consideration to the nature of the liquids to be measured, to the installation of a metering system, and to the selection, performance, operation and maintenance of the same.</p>"

46278,IS,,ISO 27145-4:2012,Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 4: Connection between vehicle and test equipment,Véhicules routiers — Mise en application des exigences de communication pour le diagnostic embarqué harmonisé à l'échelle mondiale (WWH-OBD) — Partie 4: Connexion entre véhicule et équipement d'essai,2012-08-14,1,"['43.040.10','43.180']",ISO/TC 22/SC 31,9599,[44026],[68571],['en'],17,"<p>ISO 27145-4:2012 defines the requirements to successfully establish, maintain and terminate communication with a vehicle that implements the requirements of the World-Wide Harmonized On-Board Diagnostic Global Tech

62445,IS,,ISO 27145-6:2015,Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 6: External test equipment,Véhicules routiers — Mise en application des exigences de communication pour le diagnostic embarqué harmonisé à l'échelle mondiale (WWH-OBD) — Partie 6: Équipement d'essai externe,2015-04-02,1,"['43.040.10','43.180']",ISO/TC 22/SC 31,9599,,"[82185,69141]",['en'],32,"<p>ISO 27145-6:2015 defines the requirements for the external test equipment as listed:</p><p>- a means of establishing communications between a WWH-OBD-equipped vehicle and external test equipment;</p><p>- a set of diagnostic services, including a

7683,IS,,ISO 2715:1981,Liquid hydrocarbons — Volumetric measurement by turbine meter systems,Hydrocarbures liquides — Mesurage volumétrique au moyen de compteurs à turbine,1981-08-01,1,['75.180.30'],ISO/TC 28/SC 2,9599,,"[32456,65966]","['en','fr']",15,"<p>Gives the characteristics of such equipment and rules for systematically applying appropriate consideration to the nature of the liquids to be measured, to the installation of a metering system, and to the selection, performance, operation and maintenance of the same.</p>"

7685,IS,,ISO 2716:1972,Withdrawal of ISO 2716-1972,Annulation de l'ISO 2716-1972,1972-12-01,1,['55.180.10'],ISO/TC 104,9599,,[12648],['en'],11,

44045,IS,,ISO 27186:2010,Active implantable medical devices — Four-pole connector system for implantable cardiac rhythm management devices - Dimensional and test requirements,Dispositifs médicaux actifs implantables — Systèmes de branchement à quatre pôles pour gérer le rhythme cardiaque — Dimensions et exigences d'essai,2010-03-18,1,['11.040.40'],ISO/TC 150/SC 6,9599,,[72920],['en'],81,"<p>ISO 27186:2010 specifies a four-pole connector system for implantable cardiac rhythm management devices which have pacing, electrogram sensing and/or defibrillation functions. This International Standard includes requirements for the connector portion of an implantable lead as well as for the mating conne

72920,IS,,ISO 27186:2020,Active implantable medical devices — Four-pole connector system for implantable cardiac rhythm management devices — Dimensional and test requirements,Dispositifs médicaux actifs implantables — Systèmes de branchement à quatre pôles pour dispositifs implantables de gestion du rythme cardiaque — Exigences de dimensions et d'essai,2020-11-30,2,['11.040.40'],ISO/TC 150/SC 6,9599,[44045],[86332],['en'],81,"<p>This document specifies a four-pole connector system for implantable cardiac rhythm management (CRM) devices which have pacing, electrogram sensing and/or defibrillation functions. This document includes requirements for the connector portion of an implantable lead a

7688,IS,,ISO 2719:1973,Petroleum products — Determination of flash point — Pensky-Martens closed cup method,Produits pétroliers — Détermination du point d'éclair — Méthode Pensky-Martens en vase clos,1973-09-01,1,['75.080'],ISO/TC 28,9599,,[7689],"['en','fr']",8,

7689,IS,,ISO 2719:1988,Petroleum products and lubricants — Determination of flash point — Pensky-Martens closed cup method,Produits pétroliers et lubrifiants — Détermination du point d'éclair — Méthode Pensky-Martens en vase clos,1988-12-15,2,['75.080'],ISO/TC 28,9599,[7688],"[27553,36614]","['en','fr']",11,"<p>Specifies methods for combustible liquids, liquids with suspended solids, lubricating oils, liquids that tend to form a surface film under the test conditions, and other liquids.</p>"

36614,IS,,ISO 2719:2002,Determination of flash point — Pensky-Martens closed cup method,Détermination du point d'éclair — Méthode Pensky-Martens en vase clos,2002-11-15,3,['75.080'],ISO/TC 28,9599,[7689],"[51996,62263]","['en','fr']",21,"<p>ISO 2719:2002 describes two procedures, A and B, using the Pensky-Martens closed cup tester, for determining the flash point of combustible liquids, liquids with suspended solids, liquids that tend to form a surface film under the test conditions and other liquids. It is applicable for liquids with a flash point above 40 degrees C.</p><p>Procedure A is used for the determination of the flash point of paints and varnishes that do not form a surface film, u

62263,IS,,ISO 2719:2016,Determination of flash point — Pensky-Martens closed cup method,Détermination du point d'éclair — Méthode Pensky-Martens en vase clos,2016-06-16,4,['75.080'],ISO/TC 28,9599,[36614],[89338],"['en','fr']",22,"<p>ISO 2719:2016 describes three procedures, A, B and C, using the Pensky-Martens closed cup tester, for determining the flash point of combustible liquids, liquids with suspended solids, liquids that tend to form a surface film under the test conditions, biodiesel and other liquids in the temperature range of 40 °C to 370 °C.</p><p>CAUTION - For certain mixtures no flash point, as defined, is observed; instead a significant enlargement of the test flame (not halo

79763,IS,Amd,ISO 2719:2016/Amd 1:2021,Determination of flash point — Pensky-Martens closed cup method — Amendment 1: Thermometers correction,Détermination du point d'éclair — Méthode Pensky-Martens en vase clos — Amendement 1: Correction concernant les thermomètres,2021-03-15,4,['75.080'],ISO/TC 28,9599,,[89338],"['en','fr']",1,

7692,IS,,ISO 2721:1982,Photography — Cameras — Automatic controls of exposure,Photographie — Appareils de prise de vues — Commandes automatiques de l'exposition,1982-12-01,1,['37.040.10'],ISO/TC 42,9599,[7691],"[62742,38533]","['en','fr']",7,"<p>ISO 2721:1982 defines the exposure at the focal plane of cameras for values of two exposure parameters, i.e. field luminance and film speed. It also gives methods of evaluating other photometric characteristics. The data apply to automatic exposure control systems which are built into cameras or coupled with them to regulate the exposure in the focal plane in dependence of the various exposure parameters.</p><p>ISO 2721:1982 is applicable to film-bas

7693,IS,,ISO 2722:1973,Vitreous and porcelain enamels — Determination of resistance to citric acid at room temperature,"Émaux vitrifiés — Détermination de la résistance à l'acide citrique, à la température ambiante",1973-12-01,1,['25.220.50'],ISO/TC 107,9599,,[1463],"['en','fr']",3,

1463,IS,,ISO 2722:1997,Vitreous and porcelain enamels — Determination of resistance to citric acid at room temperature,Émaux vitrifiés — Détermination de la résistance à l'acide citrique à température ambiante,1997-01-30,2,['25.220.50'],ISO/TC 107,9599,[7693],[44893],"['en','fr']",6,"<p>Specifies a method of test for the determination of acid resistance, and also a method for classifying the results. ISO 2722 is not suitable for matt enamels, enamels that come in contact with hot and strong acids and enamelled articles that are used in the chemical industry.</p>"

7694,IS,,ISO 2723:1973,Vitreous and porcelain enamels for sheet steel — Production of specimens for testing,Émaux vitrifiés pour tôle d'acier — Fabrication des échantillons pour essai,1973-12-01,1,['25.220.50'],ISO/TC 107,9599,,[1427],"['en','fr']",2,

1427,IS,,ISO 2723:1995,Vitreous and porcelain enamels for sheet steel — Production of specimens for testing,Émaux vitrifiés pour tôles d'acier — Fabrication des échantillons pour essai,1995-12-21,2,['25.220.50'],ISO/TC 107,9599,[7694],[44934],"['en','fr']",2,"<p>Specifies a method for the production of specimens suitable for testing enamels for sheet steel and enamelled sheet steel articles. Replaces the first edition, of which it constitutes a technical revision.</p>"

7695,IS,,ISO 2724:1973,Vitreous and porcelain enamels for cast iron — Production of specimens for testing,Émaux vitrifiés pour fonte — Fabrication des échantillons pour essai,1973-12-01,1,['25.220.50'],ISO/TC 107,9599,,[44934],"['en','fr']",2,"<p>When the loss in the mass per unit area of the enamel coating is to be determined quantitatively, specimens specially produced according to clause 4 shall ge used, as specimens cut from enamelled articles (clause 5) may reduce the accuracy of the test method. Gives shape and dimensions of specimens.</p>"

25263,IS,,ISO 2725-1:1996,Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets — Dimensions,Outils de manoeuvre pour vis et écrous — Douilles à carré conducteur femelle — Partie 1: Douilles à main — Dimensions,1996-11-28,1,['25.140.30'],ISO/TC 29/SC 10,9599,[7697],[37554],"['en','fr']",5,"<p>Specifies dimensions, technical specifications, designation and marking of machine-operated square drive socket wrenches as listed under number 24 in ISO 1703.</p>"

37554,IS,,ISO 2725-1:2007,Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets,Outils de manoeuvre pour vis et écrous — Douilles à carré conducteur femelle — Partie 1: Douilles à main,2007-02-14,2,['25.140.30'],ISO/TC 29/SC 10,9599,[25263],"[63677,57323]","['en','fr','ru']",6,"<p>ISO 2725-1:2007 specifies dimensions, the designation and the marking of hand-operated square drive sockets with operating end and having a hexagonal or double hexagonal form in accordance with ISO 1174-1.</p><p>Machine-operated sockets (<cite>#8220;</cite>impact<cite>#8221;</cite>) are dealt with in ISO 2725-2.</p>"

63677,IS,,ISO 2725-1:2015,Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets,Outils de manoeuvre pour vis et écrous — Douilles à carré conducteur femelle — Partie 1: Douilles à main,2015-03-13,3,['25.140.30'],ISO/TC 29/SC 10,9599,[37554],[69305],"['en','fr']",8,"<p>ISO 2725-1:2015 specifies dimensions, the designation, and the marking of hand-operated square drive sockets with operating end and having a hexagonal or double hexagonal form in accordance with ISO 1174‑1.</p><p>NOTE 1 Hand-operated square drive sockets are listed under number 2 1 02 01 0 in ISO 1703.</p><p>NOTE 2 The figures in this part of ISO 2725 are given only as examples. T

7696,IS,,ISO 2725:1973,Assembly tools for screws and nuts — Power and hand operated square drive sockets — Metric series,"Outils de manoeuvre pour vis et écrous — Douilles à carré conducteur femelle, à machine et à main — Série métrique",1973-05-01,1,['25.140.01'],ISO/TC 29,9599,,[7697],"['en','fr']",3,

7697,IS,,ISO 2725:1987,Assembly tools for screws and nuts — Machine- and hand-operated square drive sockets — Metric series,"Outils de manoeuvre pour vis et écrous — Douilles à carré conducteur femelle, à machine et à main — Série métrique",1987-07-16,1,['25.140.01'],ISO/TC 29/SC 10,9599,[7696],"[25263,25264]","['en','fr']",4,

25264,IS,,ISO 2725-2:1996,Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated sockets ('impact') — Dimensions,Outils de manoeuvre pour vis et écrous — Douilles à carré conducteur femelle — Partie 2: Douilles à machine ('impact') — Dimensions,1996-11-28,1,['25.140.01'],ISO/TC 29/SC 10,9599,[7697],[40051],"['en','fr']",5,"<p>Specifies dimensions, designation and marking of machine-operated square drive socket wrenches as listed under number 301 in ISO 1703.</p>"

40051,IS,,ISO 2725-2:2007,Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated sockets ('impact'),Outils de manoeuvre pour vis et écrous — Douilles à carré conducteur femelle — Partie 2: Douilles à machine ('impact'),2007-02-14,2,['25.140.01'],ISO/TC 29/SC 10,9599,[25264],"[57322,63678]","['en','fr','ru']",8,"<p>ISO 2725-2:2007 specifies dimensions, the designation and the marking of machine-operated <cite>#8220;</cite>impact<cite>#8221;</cite> square drive sockets with operating end having a hexagonal or double hexagonal form in accordance with ISO 1174-2.</p><p>Hand-operated sockets are dealt with in ISO 2725-1.</p>"

63678,IS,,ISO 2725-2:2015,Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated sockets ('impact'),Outils de manoeuvre pour vis et écrous — Douilles à carré conducteur femelle — Partie 2: Douilles à machine (impact),2015-03-13,3,['25.140.01'],ISO/TC 29/SC 10,9599,[40051],[69306],"['en','fr']",11,"<p>ISO 2725-2:2015 specifies dimensions, designation, and marking of machine-operated 'impact' square drive sockets with operating end having a hexagonal or double hexagonal form in accordance with ISO 1174‑2.</p><p>NOTE 1 Machine-operated 'impact' square drive sockets are listed under number 2 2 02 01 0 in ISO 1703.</p><p>NOTE 2 The figures in this part of

28550,IS,,ISO 2725-3:2001,Assembly tools for screws and nuts — Square drive sockets — Part 3: Machine-operated sockets ('non-impact') — Dimensions,Outils de manoeuvre pour vis et écrous — Douilles à carré conducteur femelle — Partie 3: Douilles à machine 'non-impact' — Dimensions,2001-03-29,1,['25.140.01'],ISO/TC 29/SC 10,9599,,[62553],"['en','fr']",4,

62553,IS,,ISO 2725-3:2015,Assembly tools for screws and nuts — Square drive sockets — Part 3: Machine-operated sockets ('non-impact'),Outils de manoeuvre pour vis et écrous — Douilles à carré conducteur femelle — Partie 3: Douilles à machine (non-impact),2015-03-13,2,['25.140.01'],ISO/TC 29/SC 10,9599,[28550],[69307],"['en','fr']",6,"<p>ISO 2725-3:2015 specifies dimensions, designation, and marking of machine-operated 'non-impact' square drive sockets.</p><p>NOTE Machine-operated 'non-impact' square drive sockets are listed under number 301 in ISO 1703:1983.</p>"

7698,IS,,ISO 2726:1973,Woodworking tools — Metal bodied planes,Outils pour le travail du bois — Rabots métalliques,1973-02-01,1,['79.120.20'],ISO/TC 29,9599,,[7699],"['en','fr']",2,

79491,IS,,ISO 27269:2021,Health informatics — International patient summary,Informatique de santé — Résumé international du dossier médical du patient,2021-04-08,1,['35.240.80'],ISO/TC 215,9599,,[84639],"['en','fr']",76,"<p>This document defines the core data set for a patient summary document that supports continuity of care for a person and coordination of their healthcare. It is specifically aimed at supporting the use case’ scenario for ‘unplanned, cross border care’ and is intended to be an international patient summary (IPS). Whilst the data set is minimal and non-exhaustive, it provides a robust, well-defined core set of data items. The tight focus on this use case also enables the IP

7701,IS,,ISO 2728:1982,Woodworking tools — Plane irons,Outils pour le travail du bois — Fers de rabots,1982-11-01,2,['79.120.20'],ISO/TC 29,9599,,[7699],"['en','fr']",4,

7702,IS,,ISO 2729:1973,Woodworking tools — Chisels and gouges,Outils pour le travail du bois — Ciseaux et gouges,1973-02-01,1,['79.120.20'],ISO/TC 29,9599,,[7703],"['en','fr']",7,

44089,IS,,ISO 27306:2009,Metallic materials — Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components,Matériaux métalliques — Méthode de correction de perte de contrainte du CTOD de la ténacité à la rupture pour l'évaluation de la rupture des composants en acier,2009-05-11,1,['77.040.10'],ISO/TC 164/SC 4,9599,,[67950],['en'],55,"<p>ISO 27306:2009 specifies a method for converting the CTOD (Crack-Tip Opening Displacement) fracture toughness obtained from laboratory specimens to an equivalent CTOD for structural components, taking constraint loss into account. This method can also apply to fracture toughness assessment using the stress intens

7705,IS,,ISO 2731:1973,Dee shackles,Manilles droites,1973-12-01,1,['53.020.30'],ISO/TC 111,9599,,[7316],"['en','fr']",3,

7706,IS,,ISO 2732:1973,Steels and cast iron — Determination of phosphorus — Spectrophotometric method,Aciers et fontes — Dosage du phosphore — Méthode spectrophotométrique,1973-12-01,1,['77.080'],ISO/TC 17,9599,,[7707],"['en','fr']",3,

7707,IS,,ISO 2732:1984,Steel and cast iron — Determination of phosphorus content — Phosphovanadomolybdate spectrophotometric method,Aciers et fontes — Dosage du phosphore — Méthode spectrophotométrique au phosphovanadomolybdate,1984-08-01,2,['77.080.01'],ISO/TC 17/SC 1,9599,[7706],[18802],"['en','fr']",3,

7708,IS,,ISO 2733:1983,Vitreous and porcelain enamels — Apparatus for testing with acid and neutral liquids and their vapours,Émaux vitrifiés — Appareil pour essai avec des liquides acides ou neutres et leurs vapeurs,1983-12-01,2,['25.220.50'],ISO/TC 107,9599,,[44894],"['en','fr']",5,<p>This second edition cancels and replaces the first edition (i. e. ISO 2733:1973). This apparatus permits the determination of the resistance of vitrious and porcelain enamels to the liquid and vapour phases of the corrosive medium within one testing period. Shows the apparatus in figures.</p>

7709,IS,,ISO 2734:1983,Vitreous and porcelain enamels — Apparatus for testing with alkaline liquids,Émaux vitrifiés — Appareil pour essai avec des liquides alcalins,1983-08-01,2,['25.220.50'],ISO/TC 107,9599,,[1499],"['en','fr']",4,

1499,IS,,ISO 2734:1997,Vitreous and porcelain enamels — Apparatus for testing with alkaline liquids,Émaux vitrifiés — Appareil pour essai avec des liquides alcalins,1997-06-26,3,['25.220.50'],ISO/TC 107,9599,[7709],[44896],"['en','fr']",6,

7710,IS,,ISO 2735:1973,Hermetically sealed metal food containers — Capacities and diameters of round open-top and vent hole cans for milk,Récipients métalliques étanches pour denrées alimentaires — Capacités et diamètres des boîtes rondes serties et venthole pour le lait,1973-05-01,1,['55.120'],ISO/TC 52,9599,,"[15915,8075]","['en','fr']",2,

7711,IS,,ISO 2736-1:1986,Concrete tests — Test specimens — Part 1: Sampling of fresh concrete,Essais du béton — Éprouvettes — Partie 1: Échantillonnage du béton frais,1986-08-14,1,['91.100.30'],ISO/TC 71/SC 1,9599,,[29097],"['en','fr']",1,"<p>Specifies methods of sampling fresh concrete and gives definitions, procedure and recording of samples.</p>"

7712,IS,,ISO 2736-2:1986,Concrete tests — Test specimens — Part 2: Making and curing of test specimens for strength tests,Essais du béton — Éprouvettes — Partie 2: Confection et conservation des éprouvettes pour essais de résistance,1986-09-18,1,['91.100.30'],ISO/TC 71/SC 1,9599,,"[29099,40554]","['en','fr']",2,"<p>Specifies methods of making and curing test specimens for strength tests. Covers also moulds, compaction of the concrete, marking and transport of test specimens and the test report. Information gained from testing the specimens is intended for use in the assessment of concrete production, both by the supplier and/or the customer.</p>"

7713,IS,,ISO 2737:1973,Permeable sintered metal materials — Determination of oil content,Matériaux en métal fritté perméable — Détermination de la teneur en huile,1973-10-01,1,['77.160'],ISO/TC 119/SC 3,9599,,[7715],"['en','fr']",1,

7714,IS,,ISO 2738:1973,Permeable sintered metal materials — Determination of density and open porosity,Matériaux métalliques frittés perméables — Détermination de la masse volumique et de la porosité ouverte,1973-12-01,1,['77.160'],ISO/TC 119,9599,,[7715],"['en','fr']",5,

7715,IS,,ISO 2738:1987,"Permeable sintered metal materials — Determination of density, oil content, and open porosity","Matériaux métalliques frittés perméables — Détermination de la masse volumique, de la teneur en huile et de la porosité ouverte",1987-04-16,2,['77.160'],ISO/TC 119/SC 3,9599,"[7714,7713]",[21494],"['en','fr']",6,

21494,IS,,ISO 2738:1999,"Sintered metal materials, excluding hardmetals — Permeable sintered metal materials — Determination of density, oil content and open porosity","Matériaux métalliques frittés, à l'exclusion des métaux-durs — Matériaux métalliques frittés perméables — Détermination de la masse volumique, de la teneur en huile et de la porosité ouverte",1999-10-28,3,['77.160'],ISO/TC 119/SC 3,9599,[7715],[85913],"['en','fr']",10,

7717,IS,,ISO 2739:1973,Sintered metal bushes — Determination of radial crushing strength,Bagues en métal fritté — Détermination de la résistance à l'écrasement radial,1973-12-01,1,"['77.160','77.040.10']",ISO/TC 119/SC 3,9599,,"[44436,7716]","['en','fr']",2,"<p>Specifies a method of measuring the radial crushing strength of sintered metal parts in the form of hollow cylinders commonly known as bushes. The method is applicable to sintered bushes composed of pure or alloyed metal powders. Gives principle, apparatus, test piece, procedure, expression of results and test report.</p>"

44436,IS,,ISO 2739:2006,Sintered metal bushes — Determination of radial crushing strength,Bagues en métal fritté — Détermination de la résistance à l'écrasement radial,2006-10-25,2,"['77.160','77.040.10']",ISO/TC 119/SC 3,9599,"[7717,39963]",[53346],"['en','fr']",3,"<p>ISO 2739:2006 specifies a method of measuring the radial crushing strength of sintered metal parts in the form of hollow cylinders, commonly known as bushes.</p><p>This method is applicable to sintered bushes composed of pure or alloyed metal powders.</p>"

7718,IS,,ISO 2740:1973,Sintered metal materials (excluding hardmetal) — Tensile test pieces,Matériaux en métal fritté (à l'exclusion des métaux durs) — Éprouvettes de traction,1973-12-01,1,"['77.160','77.040.10']",ISO/TC 119/SC 3,9599,,[7719],"['en','fr']",2,

7719,IS,,ISO 2740:1986,Sintered metal materials (excluding hardmetal) — Tensile test pieces,Matériaux en métal fritté (à l'exclusion des métaux-durs) — Eprouvettes de traction,1986-09-25,2,"['77.160','77.040.10']",ISO/TC 119/SC 3,9599,[7718],[2052],"['en','fr']",2,

2052,IS,,ISO 2740:1999,"Sintered metal materials, excluding hardmetals — Tensile test pieces","Matériaux en métal fritté, à l'exclusion des métaux-durs — Éprouvettes pour essai de traction",1999-11-25,3,"['77.160','77.040.10']",ISO/TC 119/SC 3,9599,[7719],[43513],"['en','fr']",7,

43513,IS,,ISO 2740:2007,"Sintered metal materials, excluding hardmetals — Tensile test pieces","Matériaux en métal fritté, à l'exclusion des métaux-durs — Éprouvettes pour essai de traction",2007-02-13,4,"['77.160','77.040.10']",ISO/TC 119/SC 3,9599,[2052],[51243],"['en','fr']",7,"<p>ISO 2740:2007 is applicable to all sintered metals and alloys, excluding hardmetals.</p><p>ISO 2740:2007 specifies:</p><ul><li>the die cavity dimensions used for making tensile test pieces by pressing and sintering, and by Metal Injection Moulding (MIM) and sintering;</li><li>the dimensions of tensile test pieces machined from sintered and powder forged materials.</li></ul>"

51243,IS,,ISO 2740:2009,"Sintered metal materials, excluding hardmetals — Tensile test pieces","Matériaux en métal fritté, à l'exclusion des métaux-durs — Éprouvettes pour essai de traction",2009-05-08,5,"['77.160','77.040.10']",ISO/TC 119/SC 3,9599,[43513],[80815],"['en','fr','ru']",7,"<p>ISO 2740:2009 is applicable to all sintered metals and alloys, excluding hardmetals.</p><p>ISO 2740:2009 specifies: 1) the die cavity dimensions used for making tensile test pieces by pressing and sintering, and by Metal Injection Moulding (MIM) and sintering; and 2) the dimensions of tensile test pieces machined from sintered and powder forged materials.</p>"

7721,IS,,ISO 2742:1983,Vitreous and porcelain enamels — Determination of resistance to boiling citric acid,Émaux vitrifiés — Détermination de la résistance à l'acide citrique bouillant,1983-08-01,2,['25.220.50'],ISO/TC 107,9599,,[1346],"['en','fr']",2,

1346,IS,,ISO 2742:1998,Vitreous and porcelain enamels — Determination of resistance to boiling citric acid,Émaux vitrifiés — Détermination de la résistance à l'acide citrique bouillant,1998-04-23,3,['25.220.50'],ISO/TC 107,9599,[7721],[44894],"['en','fr']",6,

44150,IS,,ISO 27427:2009,Anaesthetic and respiratory equipment — Nebulizing systems and components,Matériel d'anesthésie et de réanimation respiratoire — Systèmes de nébulisation et ses composants,2009-04-23,1,['11.040.10'],ISO/TC 121/SC 2,9599,,[55471],['en'],42,"<p>ISO 27427:2009 specifies requirements for the safety, performance and testing for general purpose nebulizing systems intended for continuous or breath-actuated delivery of liquids, in an aerosol form, to humans through the respiratory system.</p><p>ISO 27427:2009 includes gas-powered nebulizers which can be derived from, e.g., compressors, pipeline systems, cylinders etc., and electrically-powered nebulizers [e.g. spinning disc,

55471,IS,,ISO 27427:2010,Anaesthetic and respiratory equipment — Nebulizing systems and components,Matériel d'anesthésie et de réanimation respiratoire — Systèmes de nébulisation et ses composants,2010-03-03,2,['11.040.10'],ISO/TC 121/SC 2,9599,[44150],[59482],"['en','ru']",43,"<p>ISO 27427:2010 specifies requirements for the safety, performance and testing for general purpose <b>nebulizing systems</b> intended for <b>continuous</b> or <b>breath-actuated</b> delivery of liquids, in an <b>aerosol</b> form, to humans through the respiratory system.</p><p>ISO 27427:2010 includes <b>gas-powered nebulizers</b> which can be powered by, for example, compressors, pipeline systems, cylinders, etc., a

59482,IS,,ISO 27427:2013,Anaesthetic and respiratory equipment — Nebulizing systems and components,Matériel d'anesthésie et de réanimation respiratoire — Systèmes de nébulisation et ses composants,2013-12-11,3,['11.040.10'],ISO/TC 121/SC 2,9599,[55471],[78542],"['en','fr']",48,"<p>ISO 27427:2013 specifies requirements for the safety and performance testing of general purpose nebulizing systems intended for continuous or breath-actuated delivery of liquids, in aerosol form, to humans through the respiratory system.</p><p>ISO 27427:2013 includes gas-powered nebulizers which can be powered by, e.g., compressors, pipeline systems, cylinders, etc., and electrically powered nebulizers [e.g., spinn

7722,IS,,ISO 2743:1973,Vitreous and porcelain enamels — Determination of resistance to boiling hydrochloric acid,Émaux vitrifiés — Détermination de la résistance à l'acide chlorhydrique bouillant,1973-12-01,1,['25.220.50'],ISO/TC 107,9599,,[7723],"['en','fr']",2,

7723,IS,,ISO 2743:1986,Vitreous and porcelain enamels — Determination of resistance to condensing hydrochloric acid vapour,Émaux vitrifiés — Détermination de la résistance aux vapeurs de condensation de l'acide chlorhydrique,1986-07-24,2,['25.220.50'],ISO/TC 107,9599,[7722],[44894],"['en','fr']",2,"<p>This second edition cancels and replaces the first edition (i. e. ISO 2743:1973). Specifies a method of test for determining the resistance of flat surfaces of containers and chemical equipment to condensing azeotropic hydrochloric acid vapour. Gives principle, reagents, apparatus, test specimens, procedure, expression of results and test report.</p>"

7724,IS,,ISO 2744:1983,Vitreous and porcelain enamels — Determination of resistance to boiling water and water vapour,Émaux vitrifiés — Détermination de la résistance à l'eau bouillante et à sa vapeur,1983-10-01,2,['25.220.50'],ISO/TC 107,9599,,[1679],"['en','fr']",2,

1679,IS,,ISO 2744:1998,Vitreous and porcelain enamels — Determination of resistance to boiling water and water vapour,Émaux vitrifiés — Détermination de la résistance à l'eau bouillante et à sa vapeur,1998-03-19,3,['25.220.50'],ISO/TC 107,9599,[7724],[44894],"['en','fr']",6,

44156,IS,,ISO 27447:2009,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for antibacterial activity of semiconducting photocatalytic materials",Céramiques techniques — Méthode d'essai de l'activité antibactérienne des matériaux photocatalytiques semiconducteurs,2009-05-28,1,['81.060.30'],ISO/TC 206,9599,,[69874],['en'],23,"<p>ISO 27447:2009 specifies a test method for the determination of the antibacterial activity of materials that contain a photocatalyst or have photocatalytic films on the surface, by measuring the enumeration of bacteria under irradiation of ultraviolet light.</p><p>ISO 27447:2009 is intended for use with different kinds of semiconducting ph

7725,IS,,ISO 2745:1973,Vitreous and porcelain enamels — Determination of resistance to hot sodium hydroxide,Émaux vitrifiés — Détermination de la résistance à la soude caustique chaude,1973-12-01,1,['25.220.50'],ISO/TC 107,9599,,[1535],"['en','fr']",4,

1535,IS,,ISO 2745:1998,Vitreous and porcelain enamels — Determination of resistance to hot sodium hydroxide,Émaux vitrifiés — Détermination de la résistance à la soude caustique chaude,1998-03-26,2,['25.220.50'],ISO/TC 107,9599,[7725],[44896],"['en','fr']",5,

7726,IS,,ISO 2746:1973,Vitreous and porcelain enamels — Enamelled articles for service under highly corrosive conditions — High voltage test,Émaux vitrifiés — Articles émaillés pour usage dans des conditions hautement corrosives — Essai sous haute tension,1973-12-01,1,['25.220.50'],ISO/TC 107,9599,,[1571],"['en','fr']",2,

1571,IS,,ISO 2746:1998,Vitreous and porcelain enamels — Enamelled articles for service under highly corrosive conditions — High voltage test,Émaux vitrifiés — Articles émaillés pour usage dans des conditions hautement corrosives — Essai sous haute tension,1998-03-12,2,['25.220.50'],ISO/TC 107,9599,[7726],[61466],"['en','fr']",4,

7727,IS,,ISO 2747:1973,Vitreous and porcelain enamels — Enamelled cooking utensils — Determination of resistance to thermal shock,Émaux vitrifiés — Ustensiles de cuisson émaillés — Détermination de la résistance aux chocs thermiques,1973-12-01,1,"['97.040.60','25.220.50']",ISO/TC 107,9599,,[1607],"['en','fr']",3,

44203,IS,,ISO 27509:2012,Petroleum and natural gas industries — Compact flanged connections with IX seal ring,Industries du pétrole et du gaz naturel — Raccordements à brides compactes avec bague d'étanchéité IX,2012-12-13,1,['23.040.60'],ISO/TC 67/SC 6,9599,,[78201],"['en','fr']",100,"<p>ISO 27509:2012 specifies detailed manufacturing requirements for circular steel and nickel alloy compact flanged connections and associated seal rings, for designated pressures and temperatures in class designations CL 150 (PN 20) to CL 1500 (PN 260) for nominal sizes from DN 15 (NPS ½) to DN 1200 (NPS 48), and for CL 2500 (PN 420) for nominal sizes from DN 15 (NPS ½) to DN 600 (NPS 24).</p><p>ISO 27509:201

64726,IS,Cor,ISO 27509:2012/Cor 1:2013,Petroleum and natural gas industries — Compact flanged connections with IX seal ring — Technical Corrigendum 1,Industries du pétrole et du gaz naturel — Raccordements à brides compactes avec bague d'étanchéité IX — Rectificatif technique 1,2013-07-29,1,['23.040.60'],ISO/TC 67/SC 6,9599,,[78201],"['en','fr']",5,

44222,IS,,ISO 27547-1:2010,"Plastics — Preparation of test specimens of thermoplastic materials using mouldless technologies — Part 1: General principles, and laser sintering of test specimens","Plastiques — Préparation des éprouvettes de matériaux thermoplastiques par des techniques sans moule — Partie 1: Principes généraux, et frittage laser des éprouvettes",2010-09-15,1,['83.080.20'],ISO/TC 261,9599,,[79529],"['en','ru']",11,"<p>ISO 27547-1:2010 specifies the general principles of test specimen preparation using mouldless techniques. Sometimes, these techniques are called “tool-less” methods. Common to all these techniques is the fact that the specimens are produced layer by layer. The sh

7738,IS,,ISO 2758:1983,Paper — Determination of bursting strength,Papier — Détermination de la résistance à l'éclatement,1983-11-01,2,['85.060'],ISO/TC 6/SC 2,9599,,[1421],"['en','fr']",9,<p>Applies to paper having bursting strengths between 70 and 1.100 kPa. For this test the paper is submitted to increasing hydraulic pressure. Weaker papers can be tested by bursting a number of sheets simultaneously.</p>

1421,IS,,ISO 2758:2001,Paper — Determination of bursting strength,Papier — Détermination de la résistance à l'éclatement,2001-10-18,3,['85.060'],ISO/TC 6/SC 2,9599,[7738],[61487],"['en','fr']",11,

44234,IS,,ISO 27587:2009,Leather — Chemical tests — Determination of the free formaldehyde in process auxiliaries,Cuir — Essais chimiques — Dosage du formaldéhyde libre dans les auxiliaires de traitement,2009-10-13,1,['59.140.30'],IULTCS,9599,,[75297],"['en','fr']",6,<p>ISO 27587:2009 specifies a method for the determination of free formaldehyde in process auxiliaries for leather. The analytical result obtained according to this procedure is expressed in milligrams per kilogram sample. The upper limit of quantification of the method is given by the capacity of the cartridge (total carbonyls 6 400 µg/cartridge).</p>

44235,IS,,ISO 27588:2008,"Rubber, vulcanized or thermoplastic — Determination of dead-load hardness using the very low rubber hardness (VLRH) scale",Caoutchouc vulcanisé ou thermoplastique — Détermination de la dureté sous charge constante au moyen de l'échelle de très faible dureté (VLRH),2008-07-29,1,['83.060'],ISO/TC 45/SC 2,9599,,[61509],['en'],6,<p>ISO 27588:2008 specifies a dead-load method for the determination of the hardness of very soft vulcanized or thermoplastic rubbers.</p><p>The relation between the depth of penetration and the VLRH scale is linear.</p>

61509,IS,,ISO 27588:2012,"Rubber, vulcanized or thermoplastic — Determination of dead-load hardness using the very low rubber hardness (VLRH) scale",Caoutchouc vulcanisé ou thermoplastique — Détermination de la dureté sous charge constante au moyen de l'échelle de très faible dureté (VLRH),2012-06-20,2,['83.060'],ISO/TC 45/SC 2,9599,[44235],[74968],['en'],9,

7739,IS,,ISO 2759:1983,Board — Determination of bursting strength,Carton — Détermination de la résistance à l'éclatement,1983-11-01,2,['85.060'],ISO/TC 6/SC 2,9599,,[1574],"['en','fr']",9,"<p>It applies in principle to all types of board having bursting strengths between 350 and 5,500 kPa, and is also applicable to papers and boards having bursting strengths as low as 250 kPa if the paper or board is to be used to prepare a material of higher bursting strength, such as corrugated board. For this test the paper is submitted to increasing hydraulic pressure.</p>"

1574,IS,,ISO 2759:2001,Board — Determination of bursting strength,Carton — Détermination de la résistance à l'éclatement,2001-11-22,3,['85.060'],ISO/TC 6/SC 2,9599,[7739],[61488],"['en','fr']",11,

4188,IS,,ISO 276:1981,Linseed stand oil for paints and varnishes — Specifications and methods of test,Standolies d'huile de lin pour peintures et vernis — Spécifications et méthodes d'essai,1981-11-01,1,['87.060.20'],ISO/TC 35,9599,,[28659],"['en','fr']",3,<p>Specifies the requirements and the methods of test for five types of linseed stand oil. Certain of these materials are referred to as 'lithographic varnishes'. Cancels and replaces ISO Recommendation R 276-1962.</p>

28659,IS,,ISO 276:2002,Binders for paints and varnishes — Linseed stand oil — Requirements and methods of test,Liants pour peintures et vernis — Standolies d'huile de lin — Exigences et méthodes d'essai,2002-07-04,2,['87.060.20'],ISO/TC 35,9599,[4188],[76361],"['en','fr']",2,<p>ISO 276:2002 specifies the requirements and the corresponding test methods for five types of linseed stand oil suitable for paints and varnishes.</p>

7743,IS,,ISO 2764:1974,Withdrawal of ISO 2764-1974,Annulation de l'ISO 2764-1974,1974-12-01,1,['49.020'],ISO/TC 20,9599,,[5708],['en'],4,

7744,IS,,ISO 2765:1974,Withdrawal of ISO 2765-1974,Annulation de l'ISO 2765-1974,1974-12-01,1,['49.020'],ISO/TC 20,9599,,[5712],['en'],8,

44272,IS,,ISO 27668-1:2009,Gel ink ball pens and refills — Part 1: General use,Stylos à bille à encre gel et recharges — Partie 1: Utilisation générale,2009-01-27,1,['97.180'],ISO/TC 10,9599,,[69122],['en'],12,<p>ISO 27668-1:2009 establishes minimum quality requirements for gel ink ball pens (refillable and non-refillable) and refills for general use.</p><p>Additional requirements for gel ink ball pens for documentary use are given in ISO 27668‑2.</p>

69122,IS,,ISO 27668-1:2016,Gel ink ball pens and refills — Part 1: General use,Stylos à bille à encre gel et recharges — Partie 1: Utilisation générale,2016-10-13,2,['97.180'],ISO/TC 10,9599,[44272],[73281],"['en','fr']",11,<p>ISO 27668-1:2016 establishes minimum quality requirements for gel ink ball pens (refillable and non-refillable) and refills for general use.</p><p>Additional requirements for gel ink ball pens for documentary use are given in ISO 27668‑2.</p>

7746,IS,,ISO 2767:1973,Surface treatments of metals — Anodic oxidation of aluminium and its alloys — Specular reflectance at 45 degrees — Total reflectance — Image clarity,Traitements de surface des métaux — Anodisation de l'aluminium et de ses alliages — Réflectivité spéculaire à 45 degrés — Réflectivité totale — Netteté d'image,1973-05-01,1,['25.220.20'],ISO/TC 79/SC 2,9599,,"[18249,18250]","['en','fr']",4,

7747,IS,,ISO 2768:1973,Permissible machining variations in dimensions without tolerance indication,Écarts d'usinage pour cotes sans indication de tolérances,1973-12-01,1,['17.040.10'],ISO/TC 213,9599,,"[7748,7749]","['en','fr']",2,

7749,IS,,ISO 2768-2:1989,General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications,Tolérances générales — Partie 2: Tolérances géométriques pour éléments non affectés de tolérances individuelles,1989-11-02,1,['17.040.10'],ISO/TC 213,9599,[7747],[72514],"['en','fr','ru']",8,"<p>This part is intended to simplify drawing indications and specifies general tolerances in three tolerance classes. It mainly applies to features which are produced by removal of material. It contains tour tables and an informative annex A with regard to concepts behind general tolerancing of dimensions, as well as an informative annex B with further information.</p>" 7750

4189,IS,,ISO 277:1983,Raw tung oils for paints and varnishes — Specifications and methods of test,Huiles de bois de Chine brutes pour peintures et vernis — Spécifications et méthodes d'essai,1983-12-01,1,['87.060.20'],ISO/TC 35,9599,,[28658],"['en','fr']",4,"<p>Specifies the requirements and correspondig methods of test for two types of tung oil, suitable as binders. The document ist not intended result of polymerization. Cancels and replaces ISO Recommendation R 277-1962.</p>"

7753,IS,,ISO 2772-1:1973,Test conditions for box type vertical drilling machines — Testing of the accuracy — Part 1: Geometrical tests,Conditions d'essais des machines à percer verticales à montant ou 'perceuses- aléseuses' — Contrôle de la précision — Partie 1: Vérifications géométriques,1973-07-01,1,['25.080.40'],ISO/TC 39/SC 2,9599,,"[73823,71544]","['en','fr']",3,"<p>Specifies both geometrical and practical tests on these general purpose and normal accuracy drilling machines, and gives the corresponding permissible deviations which apply. It deals only with the verification of the accuracy of the machine. It does not apply to the testing of the running of the machine (vibrations, abnorma

7754,IS,,ISO 2772-2:1974,Test conditions for box type vertical drilling machines — Testing of the accuracy — Part 2: Practical test,Conditions d'essais des machines à percer verticales à montant ou 'perceuses- aléseuses' — Contrôle de la précision — Partie 2: Épreuve pratique,1974-03-01,1,['25.080.40'],ISO/TC 39/SC 2,9599,,"[73823,71544]","['en','fr']",3,<p>Specifies the pratical test to be carried out for checking these drilling machines and is a continuation of ISO 2772-1. The annex shows a graph giving the axial force F as a function of the drilling capacity of the machine.</p>

44292,IS,,ISO 27729:2012,Information and documentation — International standard name identifier (ISNI),Information et documentation — Code international normalisé des noms (ISNI),2012-03-06,1,['01.140.20'],ISO/TC 46/SC 9,9599,,[87177],"['en','fr']",15,"<p>ISO 27729:2012 specifies the International Standard name identifier (ISNI) for the identification of public identities of parties, i.e. the identities used publicly by parties involved throughout the media content industries in the creation, production, management and content distribution chains.</p><p>The ISNI system uniquely identifies public identities across multiple fields of creative activity and provides a tool for disambiguating pub

64745,IS,Cor,ISO 27729:2012/Cor 1:2013,Information and documentation — International standard name identifier (ISNI) — Technical Corrigendum 1,Information et documentation — Code international normalisé des noms (ISNI) — Rectificatif technique 1,2013-08-20,1,['01.140.20'],ISO/TC 46/SC 9,9599,,[87177],"['en','fr']",1,

7755,IS,,ISO 2773-1:1973,Test conditions for pillar type vertical drilling machines — Testing of the accuracy — Part 1: Geometrical tests,Conditions d'essais des machines à percer verticales à colonne — Contrôle de la précision — Partie 1: Vérifications géométriques,1973-07-01,1,['25.080.40'],ISO/TC 39/SC 2,9599,,[81256],"['en','fr']",3,"<p>Specifies both geometrical and practical tests on these general purpose and normal accuracy drilling machines, gives the corresponding permissible deviations which apply. It deals only with the verification of the accuracy of the machine. It does not apply to the testing of running of the machine (vibrations, abnormal noises, stick-slip motion of componen

7756,IS,,ISO 2773-2:1973,Test conditions for pillar type vertical drilling machines — Testing of the accuracy — Part 2: Practical test,Conditions d'essai des machines à percer verticales à colonne — Contrôle de la précision — Partie 2: Épreuve pratique,1973-12-01,1,['25.080.40'],ISO/TC 39/SC 2,9599,,[81256],"['en','fr']",4,<p>Specifies the pratical test to be carried out for checking these drilling machines and is a continuation of ISO 2773-1. The annex shows a graph giving the axial force F as a function of the drilling capacity of the machine.</p>

46177,IS,,ISO 27769-1:2009,Wood-based panels — Wet-process fibreboard — Part 1: Classifications,Panneaux à base de bois — Panneau de fibres obtenu par procédé humide — Partie 1: Classifications,2009-07-17,1,['79.060.20'],ISO/TC 89/SC 1,9599,,[68639],['en'],7,"<p>ISO 27769-1:2009 provides a classification matrix and related mandatory tests for two types of wet-process fibreboard: softboards and hardboards. </p><p>NOTE 1 Wet-process fibreboards are divided into three types: softboards, medium boards and hardboards.</p><p>NOTE 2 ISO 27769-1:2009 is not applicable to medium boards.</p><p>NOTE 3 Fibreboards are broadly divided into two groups based on the manufacturing process,

46178,IS,,ISO 27769-2:2009,Wood-based panels — Wet-process fibreboard — Part 2: Requirements,Panneaux à base de bois — Panneaux de fibres obtenus par procédé humide — Partie 2: Spécifications,2009-07-17,1,['79.060.20'],ISO/TC 89/SC 1,9599,,[68639],['en'],11,"<p>ISO 27769-2:2009 specifies the manufacturing property requirements for wet-process fibreboard.</p><p>NOTE The values listed in ISO 27769-2:2009 relate to product properties used to classify fibreboards into one of the different types. The values are not characteristic values to be used for design purposes. When fibreboard is classified as load-bearing and nominated for structural applications, characteristic strength and stif

44315,IS,,ISO 27789:2013,Health informatics — Audit trails for electronic health records,Informatique de santé — Historique d'expertise des dossiers de santé informatisés,2013-02-28,1,['35.240.80'],ISO/TC 215,9599,,[75313],"['en','fr']",45,"<p>ISO 27789:2013 specifies a common framework for audit trails for electronic health records (EHR), in terms of audit trigger events and audit data, to keep the complete set of personal health information auditable across information systems and domains.</p><p>It is applicable to systems processing personal health information which, complying with ISO 27799, create a secure audit record each time a user accesses, creates, updates or archives personal hea

7761,IS,,ISO 2779:1973,Aluminium machining alloys — Chemical composition and mechanical properties of alloys Al-Cu6 Bi Pb and Al-Cu4 Pb Mg,Alliages d'aluminium de décolletage — Composition chimique et caractéristiques mécaniques des alliages Al-Cu6 Bi Pb et Al-Cu4 Pb Mg,1973-09-01,1,['77.120.10'],ISO/TC 79/SC 6,9599,,[4076],"['en','fr']",2,

41298,IS,,ISO 27799:2008,Health informatics — Information security management in health using ISO/IEC 27002,Informatique de santé — Management de la sécurité de l'information relative à la santé en utilisant l'ISO/CEI 27002,2008-06-12,1,['35.240.80'],ISO/TC 215,9599,,[62777],"['en','fr']",58,"<p>ISO 27799:2008 defines guidelines to support the interpretation and implementation in health informatics of ISO/IEC 27002 and is a companion to that standard.</p><p>ISO 27799:2008 specifies a set of detailed controls for managing health information security and provides health information security best practice guidelines. By implementing this International Standard, healthcare organizations and othe