Withdrawn and superseded ISO standards — page 90 of 246

7611,IS,,ISO 2631-1:1985,Evaluation of human exposure to whole-body vibration — Part 1: General requirements,Estimation de l'exposition des individus à des vibrations globales du corps — Partie 1: Spécifications générales,1985-05-16,1,['13.160'],ISO/TC 108/SC 4,9599,"[7608,7609,7610]",[7612],"['en','fr']",17,

7608,IS,,ISO 2631:1978,Guide for the evaluation of human exposure to whole-body vibration,Guide pour l'estimation de l'exposition des individus à des vibrations globales du corps,1978-01-01,2,['13.160'],ISO/TC 108/SC 4,9599,,[7611],['en'],15,

7609,IS,Add,ISO 2631:1978/Add 2:1982,Guide for the evaluation of human exposure to whole-body vibration — Addendum 2,Guide pour l'estimation de l'exposition des individus à des vibrations globales du corps — Additif 2,1982-05-01,2,['13.160'],ISO/TC 108/SC 4,9599,,[7611],['en'],5,

7610,IS,Amd,ISO 2631:1978/Amd 1:1982,Guide for the evaluation of human exposure to whole-body vibration — Amendment 1,Guide pour l'estimation de l'exposition des individus à des vibrations globales du corps — Amendement 1,1982-04-01,2,['13.160'],ISO/TC 108/SC 4,9599,,[7611],['en'],1,

7613,IS,,ISO 2631-2:1989,Evaluation of human exposure to whole-body vibration — Part 2: Continuous and shock-induced vibrations in buildings (1 to 80 Hz),Estimation de l'exposition des individus à des vibrations globales du corps — Partie 2: Vibrations continues et induites par les chocs dans les bâtiments (1 à 80 Hz),1989-02-09,1,['13.160'],ISO/TC 108/SC 4,9599,,[23012],"['en','fr']",18,<p>General guidance is given on human response to building vibrations. Includes weighting curves of frequency response for equal annoyance of humans together with measurement methods to be used. Is concerned only with tactile perception and does not take into account auditory perception of radiated sound.</p

23012,IS,,ISO 2631-2:2003,Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz),Vibrations et chocs mécaniques — Évaluation de l'exposition des individus à des vibrations globales du corps — Partie 2: Vibrations dans les bâtiments (1 Hz à 80 Hz),2003-04-14,2,['13.160'],ISO/TC 108/SC 4,9599,[7613],[87847],"['en','fr']",11,"<p>ISO 2631-2:2003 concerns human exposure to whole-body vibration and shock in buildings with respect to the comfort and annoyance of the occupants. It specifies a method for measurement and evaluation, comprising the determination of the measurement direction and measurement location. It defi

7615,IS,,ISO 2631-3:1985,"Evaluation of human exposure to whole-body vibration — Part 3: Evaluation of exposure to whole-body z-axis vertical vibration in the frequency range 0,1 to 0,63 Hz","Estimation de l'exposition des individus à des vibrations globales du corps — Partie 3: Estimation de l'exposition des individus à des vibrations globales verticales du corps dans la gamme de fréquences de 0,1 à 0,63 Hz suivant l'axe des z",1985-05-02,1,['13.160'],ISO/TC 108/SC 4,9599,,[7612],"['en','fr']",4,

35595,IS,,ISO 2631-5:2004,Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 5: Method for evaluation of vibration containing multiple shocks,Vibrations et chocs mécaniques — Évaluation de l'exposition des individus à des vibrations globales du corps — Partie 5: Méthode d'évaluation des vibrations contenant des chocs répétés,2004-02-12,1,['13.160'],ISO/TC 108/SC 4,9599,,[50905],"['en','fr']",22,<p>ISO 2631-5:2004 addresses human exposure to mechanical multiple shocks measured at the seat pad when a person is seated.</p><p>The adverse health effects of prolonged exposure to vibration that includes multiple shocks are related to dose measures. The meth

7618,IS,,ISO 2632-1:1975,"Roughness comparison specimens — Part 1: Turned, ground, bored, milled, shaped and planed","Échantillons de comparaison viso-tactile de rugosité — Partie 1: Tournage, rectification, alésage, fraisage, rabotage et planage",1975-05-01,1,['17.040.30'],ISO/TC 213,9599,,[7619],"['en','fr']",5,

7619,IS,,ISO 2632-1:1985,"Roughness comparison specimens — Part 1: Turned, ground, bored, milled, shaped and planed","Échantillons de comparaison viso-tactile de rugosité — Partie 1: Tournage, rectification, alésage, fraisage, rabotage et planage",1985-09-05,2,['17.040.30'],ISO/TC 213,9599,[7618],[26612],['en'],4,

7620,IS,,ISO 2632-2:1977,"Roughness comparison specimens — Part 2: Spark-eroded, shot blasted and grit blasted, and polished","Échantillons de comparaison viso-tactile de regosité — Partie 2: Électro-érosion, grenaillage sphérique et angulaire, et polissage",1977-07-01,1,['17.040.30'],ISO/TC 213,9599,,[7621],"['en','fr']",3,

7622,IS,,ISO 2632-3:1979,Roughness comparison specimens — Part 3: Cast surfaces,Échantillons de comparaison viso-tactile de rugosité — Partie 3: Surfaces moulées,1979-07-01,1,['17.040.30'],ISO/TC 213,9599,,[2112],['en'],4,

43506,IS,,ISO 26324:2012,Information and documentation — Digital object identifier system,Information et documentation — Système d'identifiant numérique d'objet,2012-04-23,1,['01.140.20'],ISO/TC 46/SC 9,9599,,[81599],"['en','fr']",17,"<p>ISO 26324:2012 specifies the syntax, description and resolution functional components of the digital object identifier system, and the general principles for the creation, registration and administration of DOI names (where DOI is an acronym for 'digital object identifier'). </p><p>ISO 26324:2012 defines the syntax for a DOI name, which is used for the identification of an object of any material form (digital or physical) or an abstraction (such as a textual

81599,IS,,ISO 26324:2022,Information and documentation — Digital object identifier system,Information et documentation — Système d'identifiant numérique d'objet,2022-08-26,2,['01.140.20'],ISO/TC 46/SC 9,9599,[43506],[88862],['en'],18,"<p>This document specifies the syntax, description and resolution functional components of the digital object identifier system. It specifies the general principles for the creation, registration and administration of DOI names (where DOI is an initialism for “digital object identifier”).</p><p>This document defines the syntax for a DOI name, which is used for the identification of an object of any material form (digital or physical) or an abstraction (such as

7624,IS,,ISO 2635:1979,Aircraft — Conductors for general purpose aircraft electrical cables and aerospace applications — Dimensions and characteristics,Aéronefs — Conducteurs pour câbles électriques pour usage général aéronautique et pour applications aérospatiales — Dimensions et caractéristiques,1979-04-01,1,['49.060'],ISO/TC 20/SC 1,9599,"[4498,4497]",[37571],"['en','fr']",2,"<p>Gives the values of multi-wire conductors over the nominal cross-sectional area range O,15 to 107 mm . Does not apply to conductors for fire-resistant cables or for thermocouple extension cables. Conductors of nominal cross-sectional area 0,25 mm and 0,15 mm are produced in high-strength copper alloy, and conducto

7626,IS,,ISO 2636:1973,Information processing — Conventions for incorporating flowchart symbols in flowcharts,Traitement de l'information — Conventions relatives à la disposition des symboles dans les organigrammes,1973-05-01,1,"['01.080.50','35.080']",ISO/IEC JTC 1/SC 2,9599,,[11955],"['en','fr']",5,

43521,IS,,ISO 26362:2009,"Access panels in market, opinion and social research — Vocabulary and service requirements","«Access panels» pour les études de marché, études sociales et d'opinion — Vocabulaire et exigences de service",2009-01-05,1,"['03.020','01.040.03']",ISO/TC 225,9599,,[73671],"['en','fr']",13,"<p>ISO 26362:2009 specifies the terms and definitions, as well as the service requirements, for organizations and professionals who own and/or use access panels for market, opinion and social research. It develops the criteria against which access panel providers can be evaluated and against which the quality of access panels can be assessed.</p><p>ISO 26362:2009 is applicable to all ty

43529,IS,,ISO 26367-1:2011,Guidelines for assessing the adverse environmental impact of fire effluents — Part 1: General,Lignes directrices pour déterminer l'impact environnemental des effluents du feu — Partie 1: Généralités,2011-02-25,1,['13.220.01'],ISO/TC 92/SC 3,9599,,[72536],"['en','fr']",18,"<p>ISO 26367-1:2011 gives guidelines whose primary focus is the assessment of the adverse environmental impact of fire effluents, including those from fires occurring in commercial and domestic premises, unenclosed commercial sites, industrial and agricultural sites, as well as those involving road, rail and maritime transport systems. Its scope does not extend to direct acute toxicity issues, whi

7627,IS,,ISO 2637:1973,Aluminium and its alloys — Determination of zinc — Atomic absorption method,Analyse chimique de l'aluminium et de ses alliages — Dosage du zinc — Méthode par absorption atomique,1973-09-01,1,['77.120.10'],ISO/TC 79,9599,,[11199],"['en','fr']",4,

7628,IS,,ISO 2639:1982,Steel — Determination and verification of the effective depth of carburized and hardened cases,Acier — Détermination et vérification de la profondeur conventionnelle de cémentation,1982-04-01,2,['77.040.99'],ISO/TC 17/SC 7,9599,,[30695],"['en','fr']",3,"<p>Defines the effective case depth, and specifies methods for the determination of this depth, in steel. Is applicable to carburized cases and carbo-nitrided cases, the depth of which is greater than 0,3 mm, and parts which have a hardness of less than 450 HV at a distance of 3 X the effective case depth from the surface.</p>"

30695,IS,,ISO 2639:2002,Steels — Determination and verification of the depth of carburized and hardened cases,Acier — Détermination et vérification de la profondeur de cémentation,2002-11-05,3,['77.040.99'],ISO/TC 17/SC 7,9599,[7628],[61748],"['en','fr']",5,"<p>ISO 2639 defines the case-hardened depth, and specifies methods for the determination of this depth, in steel.</p><p>It is applicable to</p><ol><li>carburized cases and carbonitrided cases;</li><li>parts that, when heat treated to final hardness, have a hardness of less than 450 HV 1 at a distance of three times the case-hardened depth, from the surface.</li></ol><p>The case-hardened depth is defined by special agreement where these c

4169,IS,,ISO 264:1976,Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure — Laying lengths — Metric series,Raccords en polychlorure de vinyle (PVC) non plastifié à emboîtements lisses pour tubes sous pression — Cotes de montage — Série métrique,1976-02-01,1,['23.040.45'],ISO/TC 138/SC 2,9599,,[50363],"['en','fr']",5,"<p>Contains tables with specifications of dimensions and tolerances of unplasticized PVC-fittings under pressure, fitting together with the specified nominal outside diameters of tubes according ISO 161-1. It should be used as a guide to manufacturers and users and as a basis for specific standards.</p>"

4170,IS,Add,ISO 264:1976/Add 1:1982,Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure — Laying lengths — Metric series — Addendum 1: Diameters 200 mm and 225 mm,Raccords en polychlorure de vinyle (PVC) non plastifié à emboîtements lisses pour tubes sous pression — Cotes de montage — Série métrique — Additif 1: Diamètres 200 et 225 mm,1982-10-01,1,['23.040.45'],ISO/TC 138/SC 2,9599,,[50363],"['en','fr']",2,

43575,IS,,ISO 26422:2011,Petroleum and related products — Determination of shear stability of lubricating oils containing polymers — Method using a tapered roller bearing,Pétrole et produits connexes — Détermination de la stabilité au cisaillement des huiles lubrifiantes contenant des polymères — Méthode avec roulement à rouleaux coniques,2011-03-10,1,['75.100'],ISO/TC 28,9599,,[63727],['en'],9,"<p>ISO 26422:2011 specifies a method of determining the shear stability of polymer-containing lubricating oils, including pressure fluids, by the four-ball tester as specified in ISO 20623, but using a tapered roller bearing. The test results allow prediction of the in-service permanent viscosity los

43584,IS,,ISO 26443:2008,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Rockwell indentation test for evaluation of adhesion of ceramic coatings",Céramiques techniques — Évaluation de l'adhérence des revêtements céramiques par l'essai de pénétration Rockwell,2008-05-28,1,['81.060.30'],ISO/TC 206,9599,,[86445],"['en','fr']",6,<p>ISO 26443:2008 specifies a method for the qualitative evaluation of the adhesion of ceramic coatings up to 20 µm thick by indentation with a Rockwell diamond indenter. The formation of cracks after indentation may also reveal cohesive failure. The indentations are made with a Rockwell hardness test instrument.</p><p>The method described may also be

7630,IS,,ISO 2645:1975,Materials and equipment for petroleum and natural gas industries — Casing and tubing for oil or natural gas wells,Matériel d'équipement pour les industries du pétrole et du gaz naturel — Tubes de cuvelage et tubes de production pour puits de pétrole ou de gaz naturel,1975-05-01,1,"['77.140.75','75.180.10']",ISO/TC 67/SC 5,9599,,[21346],"['en','fr']",43,

7632,IS,,ISO 2647:1973,Wool — Determination of percentage of medullated fibres by the projection microscope,"Laine — Détermination du pourcentage de fibres médullées, au moyen du microscope à projection",1973-04-01,1,['59.060.10'],ISO/TC 38/SC 23,9599,,[76603],"['en','fr']",2,"<p>The method is applicable to woolen and worsted products, at all stages, from raw materials to yarn. It utilizes the same apparatus and technique as that described in ISO/R 137. Since the method of preparation and measurements gives a length-biased sample, the result given by this method is an estimate of the length of medullated fibres as a percentage of the total length of all fibres. It cannot be used to estimate

7633,IS,,ISO 2648:1974,Wool — Determination of fibre length distribution parameters — Electronic method,Laine — Détermination des paramètres de distribution de longueur des fibres — Méthode électronique,1974-12-01,1,['59.060.10'],ISO/TC 38/SC 23,9599,,"[73541,1940]","['en','fr']",19,"<p>Specifies a method for the determination principally of mean length and coefficient of variation of length for all-wool slivers and rovings. It is not directly applicable to slivers made up of a blend of two or more fibres. Selection of test specimen is effected using an auxiliary machine, called 'mechanical grip'. It may be used on top slivers, on worsted drawing slivers and rovings, and on slivers from the

7634,IS,,ISO 2649:1974,"Wool — Determination of short-term irregularity of linear density of slivers, rovings and yarns, by means of an electronic evenness tester","Laine — Détermination de l'irrégularité de masse linéique à court terme des rubans, mèches et fils, à l'aide d'un régularimètre électronique",1974-12-01,1,['59.080.30'],ISO/TC 38,9599,,[1859],"['en','fr']",14,"<p>The determination of the value of irregularity cited in the title is of great importance, both for the evaluation of sliver or yarn quality and for active control of preparation for spinning. This standard gives the necessary guidance in this respect and is applicable for the determination of short-term irregularity of l

7635,IS,,ISO 2650:1974,Withdrawal of ISO 2650-1974,Annulation de l'ISO 2650-1974,1974-03-01,1,['49.020'],ISO/TC 20,9599,,[13727],['en'],2,

7636,IS,,ISO 2653-1:1975,Environmental tests for aircraft equipment — Part 1: Ice formation,Essais en environnement pour les équipements aéronautiques — Partie 1: Formation de glace,1975-11-01,1,['49.020'],ISO/TC 20,9599,,[13728],['en'],3,

7637,IS,,ISO 2655:1975,Withdrawal of ISO 2655-1975,Annulation de l'ISO 2655-1975,1975-07-01,1,['49.020'],ISO/TC 20,9599,,[13727],['en'],5,

7638,IS,,ISO 2657:1976,Withdrawal of ISO 2657-1976,Annulation de l'ISO 2657-1976,1976-09-01,1,['49.020'],ISO/TC 20,9599,,[13727],['en'],5,

7639,IS,,ISO 2658:1975,Withdrawal of ISO 2658-1975,Annulation de l'ISO 2658-1975,1975-07-01,1,['49.020'],ISO/TC 20,9599,,[13727],['en'],1,

4174,IS,,ISO 266:1975,Acoustics — Preferred frequencies for measurements,Acoustique — Fréquences normales pour les mesurages,1975-07-01,1,['17.140.01'],ISO/TC 43,9599,,[1350],"['en','fr']",2,

43618,IS,,ISO 26602:2009,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Silicon nitride materials for rolling bearing balls",Céramiques techniques — Matériaux en nitrure de silicium pour billes utilisées dans les roulements à billes,2009-01-15,1,['81.060.30'],ISO/TC 206,9599,,[65456],['en'],7,<p>ISO 26602:2009 specifies the requirements for preprocessed silicon nitride materials for rolling bearing balls.</p><p>ISO 26602:2009 provides a classification defining physical and mechanical properties of silicon nitride preprocessed bearing ball materials. The materials are classified in three categories by the specification of characteristics and microstructures. </p>

43623,IS,,ISO 26603:2008,Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of total chlorine,Plastiques — Isocyanates aromatiques utilisés pour la production de polyuréthannes — Dosage du chlore total,2008-08-11,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[72472],"['en','ru']",9,"<p>ISO 26603:2008 is used to determine the total chlorine content of aromatic isocyanates used in the preparation of polyurethanes. The difference between the total chlorine content and the hydrolyzable chlorine content (see ISO 15028) is a measure of the process solvents left in the product. Both test methods are applicable to a variety of organic compounds, including aliphatic is

72472,IS,,ISO 26603:2017,Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of total chlorine,Plastiques — Isocyanates aromatiques utilisés pour la production de polyuréthannes — Dosage du chlore total,2017-03-02,2,['83.080.10'],ISO/TC 61/SC 12,9599,[43623],[91004],['en'],9,"<p>ISO 26603:2017 specifies the determination of the total chlorine content of aromatic isocyanates used in the preparation of polyurethanes. The difference between the total chlorine content and the hydrolyzable chlorine content (see ISO 15028) is a measure of the process solvents left in the product. Both test methods are applicable to a variety of organic compounds, including al

43627,IS,,ISO 26622-1:2008,Modular taper interface with ball track system — Part 1: Dimensions and designation of shanks,Interfaces à cône modulaire avec système de serrage à billes — Partie 1: Dimensions et désignation des queues,2008-11-06,1,['25.060.20'],ISO/TC 29,9599,,[64169],"['en','fr']",11,"<p>ISO 26622-1:2008 specifies the dimensions for a modular taper interface with ball track system: tapered shanks for automatic and manual tool exchange to be applied on machine tools (e.g. lathe machines, drilling machines, milling machines and turn/milling machine centres). A range of shank sizes is specified.</p>"

43629,IS,,ISO 26623-1:2008,Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks,Interfaces à cône polygonal avec face d'appui — Partie 1: Dimensions et désignation des queues,2008-11-06,1,['25.060.20'],ISO/TC 29,9599,,[60401],"['en','fr']",9,"<p>ISO 26623-1:2008 specifies the dimensions for polygonal taper interface with flange contact surface: polygon-shanks for automatic and manual tool exchange to be applied on machine tools (e.g. turning machines, drilling machines, milling machines and turn/milling centres, as well as grinding machines). A range of shank sizes is specified.</p>"

60401,IS,,ISO 26623-1:2014,Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks,Interfaces à cône polygonal avec face d'appui — Partie 1: Dimensions et désignation des queues,2014-08-19,2,['25.060.20'],ISO/TC 29/SC 9,9599,[43629],[72968],"['en','fr']",11,"<p>ISO 26623-1:2014 specifies dimensions for polygonal taper interfaces with flange contact surface: polygon-shanks for automatic and manual tool exchange to be applied on machine tools (e. g. turning machines, drilling machines, milling machines, and turn/milling centres, as well as grinding machines). A range of shank sizes is specified.</p>"

43630,IS,,ISO 26623-2:2008,Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers,Interfaces à cône polygonal avec face d'appui — Partie 2: Dimensions et désignation des nez de broche,2008-11-06,1,['25.060.20'],ISO/TC 29,9599,,[60402],"['en','fr']",4,"<p>ISO 26623-2:2008 specifies the dimensions for a polygonal taper interface with flange contact surface: polygon-receivers for automatic and manual tool exchange to be applied on machine tools (e.g. turning machines, drilling machines, milling machines and turn/milling centres, as well as grinding machines). A range of receiver sizes is specified.</p>"

7640,IS,,ISO 2669-1:1978,Environmental tests for aircraft equipment — Part 1: Steady state acceleration,Essais en environnement pour les équipements aéronautiques — Partie 1: Essais d'accélération constante,1978-09-01,1,['49.020'],ISO/TC 20,9599,,[7641],"['en','fr']",4,

43700,IS,,ISO 26722:2009,Water treatment equipment for haemodialysis applications and related therapies,Équipement de traitement de l'eau pour des applications en hémodialyse et aux thérapies apparentées,2009-04-15,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[61864],"['en','ru']",30,"<p>ISO 26722:2009 is addressed to the manufacturer and/or provider of water treatment systems and/or devices used for the express purpose of providing water for haemodialysis or related therapies.</p><p>ISO 26722:2009 covers devices used to treat water intended for use in the delivery of haemodialysis and related therapies. Included in the scope of this International Standard is water used for: (1) the preparation of

61864,IS,,ISO 26722:2014,Water treatment equipment for haemodialysis applications and related therapies,Équipement de traitement de l'eau pour des applications en hémodialyse et aux thérapies apparentées,2014-03-17,2,['11.040.40'],ISO/TC 150/SC 2,9599,[43700],[67611],"['en','fr']",34,"<p>ISO 26722:2014 is addressed to the manufacturer and/or supplier of water treatment systems and/or devices used for the express purpose of providing water for haemodialysis or related therapies.</p><p>ISO 26722:2014 covers devices used to treat water intended for use in the delivery of haemodialysis and related therapies, including water used for: (1) the preparation of concentrates from powder or other highl

7643,IS,,ISO 2676:1975,Withdrawal of ISO 2676-1975,Annulation de l'ISO 2676-1975,1975-08-01,1,['49.020'],ISO/TC 20,9599,,[13727],['en'],2,

7644,IS,,ISO 2678-1:1977,Environmental tests for aircraft equipment — Part 1: Insulation resistance and high voltage tests for electrical equipment,Essais en environnement pour les équipements aéronautiques — Partie 1: Essais de résistance d'isolement et de haute tension pour les équipements électriques,1977-12-01,1,['49.060'],ISO/TC 20,9599,,[7645],['en'],3,

43807,IS,,ISO 26824:2013,Particle characterization of particulate systems — Vocabulary,Caractérisation des particules dans les systèmes particulaires — Vocabulaire,2013-07-15,1,"['01.040.19','19.120']",ISO/TC 24/SC 4,9599,,[78458],['en'],50,"<p>ISO 26824:2013 establishes a vocabulary of terms and definitions relevant to the particle characterization of particulate systems. It covers such fields as the representation of results of particle size analysis, the descriptive and quantitative representation of particle shape and morphology, sample preparation, specific surface area and porosity characterization and measurement methods including sedimentation, classification, acoustic methods, laser

43811,IS,,ISO 26825:2008,"Anaesthetic and respiratory equipment — User-applied labels for syringes containing drugs used during anaesthesia — Colours, design and performance","Matériel d'anesthésie et de réanimation respiratoire — Étiquettes apposées par l'utilisateur sur les seringues contenant des médicaments utilisés pendant l'anesthésie — Couleurs, aspect et propriétés",2008-08-04,1,"['11.040.10','11.040.25']",ISO/TC 121/SC 1,9599,,[76678],"['en','fr','ru']",5,"<p>ISO 26825:2008 gives requirements for labels which the user attaches to syringes so that the contents can be identified just before use during anaesthesia. It covers the colour, size, design and general properties of the label

7647,IS,,ISO 2684:1975,Withdrawal of ISO 2684-1975,Annulation de l'ISO 2684-1975,1975-11-01,1,['49.020'],ISO/TC 20,9599,,[13727],['en'],3,

53679,IS,,ISO 26842-1:2009,Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 1: Resistance to delamination in non-severe environments,Adhésifs — Méthodes d'essai pour l'évaluation et la sélection des adhésifs destinés aux produits en bois pour l'usage intérieur — Partie 1: Résistance à la délamination dans des environnements non sévères,2009-10-01,1,['83.180'],ISO/TC 61/SC 11,9599,,[56800],"['en','fr','ru']",7,"<p>ISO 26842-1:2009 gives guidelines for the selection, by means of delamination-resistance tests, of adhesives for use in wood products placed in non-severe environments, indoors or during transport, in which the products are not e

56800,IS,,ISO 26842-1:2013,Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 1: Resistance to delamination in non-severe environments,Adhésifs — Méthodes d'essai pour l'évaluation et la sélection des adhésifs destinés aux produits en bois pour l'usage intérieur — Partie 1: Résistance à la délamination dans des environnements non sévères,2013-05-30,2,['83.180'],ISO/TC 61/SC 11,9599,[53679],[78300],['en'],7,"<p>ISO 26842-1:2013 gives guidelines to select, by means of delamination-resistance tests, adhesive/wood combinations in non-severe environments in which the products are not exposed to extreme changes in temperature and humidity. A seri

53680,IS,,ISO 26842-2:2009,Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 2: Resistance to delamination in severe environments,Adhésifs — Méthodes d'essai pour l'évaluation et la sélection des adhésifs destinés aux produits en bois pour l'usage intérieur — Partie 2: Résistance à la délamination dans des environnements sévères,2009-10-01,1,['83.180'],ISO/TC 61/SC 11,9599,,[56801],"['en','fr','ru']",6,"<p>ISO 26842-2:2009 gives guidelines for the selection, by means of delamination-resistance tests, of adhesives for use in wood products placed in severe environments, indoors or during transport, in which the products are exposed to extrem

56801,IS,,ISO 26842-2:2013,Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 2: Resistance to delamination in severe environments,Adhésifs — Méthodes d'essai pour l'évaluation et la sélection des adhésifs destinés aux produits en bois pour l'usage intérieur — Partie 2: Résistance à la délamination dans des environnements sévères,2013-05-30,2,['83.180'],ISO/TC 61/SC 11,9599,[53680],[78301],['en'],6,"<p>ISO 26842-2:2013 gives guidelines to select, by means of delamination-resistance tests, adhesive/wood combinations for use in wood products placed in severe environments, in which the products are exposed to extreme change of temperature and

7649,IS,,ISO 2685:1992,Aircraft — Environmental conditions and test procedures for airborne equipment — Resistance to fire in designated fire zones,Aéronautique — Conditions et méthodes d'essai en environnement des équipements embarqués — Résistance au feu dans les zones désignées comme 'zones de feu',1992-07-16,1,['49.020'],ISO/TC 20,9599,[7648],[23569],"['en','fr']",29,

43851,IS,,ISO 26870:2009,Space systems — Launch pad and integration site operational documents,Systèmes spatiaux — Documents opérationnels pour aire de lancement et site d'intégration,2009-11-17,1,['49.140'],ISO/TC 20/SC 14,9599,,[81697],['en'],15,"<p>ISO 26870:2009 establishes requirements for the nomenclature, structure and contents of operational documents used at a launch pad or integration site.</p><p>When there is international participation, partnership or cooperation in the design, development, installation, test, activation or operation of a launch pad or integration site, ISO 26870:2009 applies to the development of the operational documents required for the following circumstances

57528,IS,,ISO 26871:2012,Space systems — Explosive systems and devices,Systèmes spaciaux — Dispositifs et equipements explosifs,2012-11-27,1,['49.140'],ISO/TC 20/SC 14,9599,,[74186],['en'],67,"<p>ISO 26871:2012 specifies requirements for the use of explosives on spacecraft and other space products, including launch vehicles. It addresses the aspects of design, analysis, verification, manufacturing, operations and safety.</p>"

43853,IS,,ISO 26872:2010,Space systems — Disposal of satellites operating at geosynchronous altitude,Systèmes spatiaux — Élimination des satellites opérant à une altitude géostionnaire,2010-09-03,1,['49.140'],ISO/TC 20/SC 14,9599,,[74189],['en'],53,<p>ISO 26872:2010 specifies requirements for the following:</p><ul><li> planning for disposal of satellites operating at geosynchronous altitude to ensure that final disposal is sufficiently characterized and that adequate propellant will be reserved for the manoeuvre;</li><li> selecting final disposal orbits where the satellite will not re-enter the operational region within the next 100 years;</li><li> executing the disposal ma

74189,IS,,ISO 26872:2019,Space systems — Disposal of satellites operating at geosynchronous altitude,Systèmes spatiaux — Élimination des satellites opérant à une altitude géostionnaire,2019-07-03,2,['49.140'],ISO/TC 20/SC 14,9599,[43853],[75221],['en'],46,<p>This document specifies requirements for the following:</p><p>— planning for disposal of a spacecraft operating at geosynchronous altitude to ensure that final disposal is sufficiently characterized and that adequate propellant will be reserved for the manoeuvre;</p><p>— selecting final disposal orbits where the spacecraft will not re-enter the operational region within the next 100 years;</p><p>— executing the

4177,IS,,ISO 269:1976,Correspondence envelopes — Designation and sizes,Enveloppes et pochettes postales — Désignation et formats,1976-09-01,1,['85.080.10'],ISO/TC 6,9599,,[4178],"['en','fr']",2,

46135,IS,,ISO 26900:2012,Space data and information transfer systems — Orbit data messages,Systèmes de transfert des informations et données spatiales — Messages pour données d'orbites,2012-07-13,1,['49.140'],ISO/TC 20/SC 14,9599,[42722],[85529],['en'],81,"<p>ISO 26900:2012 specifies three standard message formats for use in transferring spacecraft orbit information between space agencies and commercial or governmental spacecraft operators: the Orbit Parameter Message (OPM), the Orbit Mean-Elements Message (OMM), and the Orbit Ephemeris Message (OEM). Such exchanges are used for</p><p>a) pre-flight planning for tracking or navigation support,</p><p>b) scheduling tracking support,</p><p>c) ca

43894,IS,,ISO 26906:2009,Hydrometry — Fishpasses at flow measurement structures,Hydrométrie — Échelles à poissons auprès des structures mesurant le débit,2009-03-25,1,['17.120.20'],ISO/TC 113/SC 2,9599,,[62435],['en'],29,"<p>ISO 26906:2009 specifies requirements for the integration of fishpasses with flow measurement structures. It identifies those fishpasses which have satisfactory hydrometric calibration data and gives methods for computing combined flows and uncertainties.</p><p>NOTE Measurement structures and fishpasses have inherently different hydraulic performance criteria. Water measurement structures perform better with uniform flow patterns; conversely, fish passage perfor

7651,IS,,ISO 2691:1973,Photography — Expendable photoflash lamps — Definitions and requirements for luminous flux/time characteristics,Photographie — Lampes à éclairs à combustion — Définitions et spécifications des caractéristiques flux lumineux/temps,1973-06-01,1,['37.040.10'],ISO/TC 42,9599,,[7652],"['en','fr']",1,

43903,IS,,ISO 26910-1:2009,Springs — Shot peening — Part 1: General procedures,Ressorts — Grenaillage de précontrainte — Partie 1: Modes opératoires généraux,2009-06-08,1,['21.160'],ISO/TC 227,9599,,[87025],"['en','fr']",15,"<p>ISO 26910-1:2009 specifies general requirements for the shot peening process applied to springs in order to improve their resistance to fatigue and stress corrosion cracking, mainly by introducing compressive residual stresses into their surface layers.</p>"

67843,IS,Amd,ISO 26910-1:2009/Amd 1:2017,Springs — Shot peening — Part 1: General procedures — Amendment 1,Ressorts — Grenaillage de précontrainte — Partie 1: Modes opératoires généraux — Amendement 1,2017-06-14,1,['21.160'],ISO/TC 227,9599,,[87025],"['en','fr']",3,

7653,IS,,ISO 2692:1988,Technical drawings — Geometrical tolerancing — Maximum material principle,Dessins techniques — Tolérancement géométrique — Principe du maximum de matière,1988-12-29,1,['01.100.20'],ISO/TC 213,9599,[5617],"[43445,32158,7654]","['en','fr']",21,<p>Constitutes a technical revision of ISO 1101-2. Defines and describes the maximum material principle which is indicated on drawings by the symbol (M) and facilitates manufacture without disturbing the free assembly of parts in case of mutual dependence of size and geometry. Figures are intended only as illustrations for understanding the maximum material principle.</p>

7655,IS,Amd,ISO 2692:1988/Amd 1:1992,Technical drawings — Geometrical tolerancing — Maximum material principle — Amendment 1: Least material requirement,Dessins techniques — Tolérancement géométrique — Principe du maximum de matière — Amendement 1: Exigence du minimum de matière,1992-10-08,1,['01.100.20'],ISO/TC 213,9599,,"[43445,32158]","['en','fr']",6,<p>Defines and establishes the 'least material requirement' and specifies its application. The symbol is placed in the tolerance frame after the tolerance or after the datum letter.</p>

43445,IS,,ISO 2692:2006,"Geometrical product specifications (GPS) — Geometrical tolerancing — Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)","Spécification géométrique des produits (GPS) — Tolérancement géométrique — Exigence du maximum de matière (MMR), exigence du minimum de matière (LMR) et exigence de réciprocité (RPR)",2006-12-12,2,['01.100.20'],ISO/TC 213,9599,"[7653,7655]",[60775],"['en','fr']",31,"<p>ISO 2692:2006 defines the maximum material requirement, the least material requirement and the reciprocity requirement, and specifies their applications.</p><p>These requirements are used to control specific functions of workpieces

60775,IS,,ISO 2692:2014,"Geometrical product specifications (GPS) — Geometrical tolerancing — Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)","Spécification géométrique des produits (GPS) — Tolérancement géométrique — Exigence du maximum de matière (MMR), exigence du minimum de matière (LMR) et exigence de réciprocité (RPR)",2014-12-15,3,['01.100.20'],ISO/TC 213,9599,[43445],[74592],"['en','fr']",46,"<p>ISO 2692:2014 defines the maximum material requirement, the least material requirement and the reciprocity requirement. These requirements can only be applied to features of size.</p><p>These requirements are used to control specific fun

43928,IS,,ISO 26945:2008,Metallic and other inorganic coatings — Electrodeposited coatings of tin-cobalt alloy,Revêtements métalliques et autres revêtements inorganiques — Dépôts électrolytiques d'alliage étain-cobalt,2008-12-08,1,['25.220.40'],ISO/TC 107,9599,,[56738],"['en','fr']",10,"<p>ISO 26945:2008 specifies electroplated coatings of tin-cobalt alloy of approximate composition 75 % (mass fraction) to 80 % (mass fraction) tin, remainder cobalt, as a substitute for decorative chromium coating of 0,1 µm to 0,3 µm thickness. Hardness and wear resistance properties of the coatings obtained are not equivalent to those of chromium coatings, but similar to those of tin-nickel alloy coatings.</

7659,IS,,ISO 2697:1974,Road vehicles — Fuel injection nozzles — Size 'S',Véhicules routiers — Injecteurs — Taille 'S',1974-04-01,1,['43.060.40'],ISO/TC 22,9599,,[30214],"['en','fr']",5,

7660,IS,,ISO 2698:1974,Diesel engines — Injection nozzle holder — Type 7,Moteurs Diesel — Porte-injecteur type 7,1974-02-01,1,['43.060.40'],ISO/TC 22,9599,,[7661],"['en','fr']",2,

7661,IS,,ISO 2698:1993,"Diesel engines — Clamp-mounted fuel injectors, types 7 and 28","Moteurs à allumage par compression — Porte-injecteurs de combustible complets à fixation par patte, types 7 et 28",1993-07-08,2,['43.060.40'],ISO/TC 22,9599,[7660],[59866],"['en','fr']",6,"<p>Specifies dimensions necessary for the mounting of fuel injectors in diesel engines. Applies to clamp-mounted injectors of types 7 and 28 made of an integral nozzle and nozzle holder design with a 9,5 mm (nominal) injector shank diameter.</p>"

59866,IS,,ISO 2698:2013,"Diesel engines — Clamp-mounted fuel injectors, types 7 and 28","Moteurs à allumage par compression — Porte-injecteurs de combustible complets à fixation par patte, types 7 et 28",2013-05-14,3,['43.060.40'],ISO/TC 22/SC 34,9599,[7661],[69499],['en'],6,"<p>ISO 2698:2013 specifies dimensions necessary for the mounting of fuel injectors in diesel (compression-ignition) engines. The location of the fuel inlet and leak-off connections, and the dimensions of the clamp are not defined since they vary according to the particular application.</p><p>ISO 2698:2013 applies to clamp-mounted injectors of types 7 and 28 made of an integral nozzle and nozzle holder design with a 9,5

7662,IS,,ISO 2699:1983,"Road vehicles — Flange-mounted injection nozzle holders size 'S' — Types 2, 3, 4, 5 and 6","Véhicules routiers — Porte-injecteurs à bride de taille 'S' — Types 2, 3, 4, 5 et 6",1983-11-01,2,['43.060.40'],ISO/TC 22,9599,,[22735],"['en','fr']",5,

4180,IS,,ISO 270:1975,Withdrawal of ISO 270-1975,Annulation de l'ISO 270-1975,1975-10-01,1,['59.060.01'],ISO/TC 38,9599,,[13551],"['en','fr']",3,

7665,IS,,ISO 2702:1974,Heat-treated steel tapping screws — Mechanical properties,Vis à tôle en acier traité thermiquement — Caractéristiques mécaniques,1974-08-01,1,['21.060.10'],ISO/TC 2,9599,,[7666],"['en','fr']",3,

7666,IS,,ISO 2702:1992,Heat-treated steel tapping screws — Mechanical properties,Vis à tôle en acier traité thermiquement — Caractéristiques mécaniques,1992-03-25,2,['21.060.10'],ISO/TC 2/SC 13,9599,[7665],[54044],"['en','fr']",3,"<p>Specifies the characteristics of screws with threads from ST2,2 to ST8. Describes the test methods to be used. Figure 1 shows a torsional test apparatus.</p>"

54044,IS,,ISO 2702:2011,Heat-treated steel tapping screws — Mechanical properties,Vis à tôle en acier traité thermiquement — Caractéristiques mécaniques,2011-04-20,3,['21.060.10'],ISO/TC 2/SC 13,9599,[7666],"[80932,72577]","['en','fr']",6,"<p>ISO 2702:2011 specifies the characteristics of heat-treated steel tapping screws, with tapping screw thread from ST2,2 to ST9,5 inclusive according to ISO 1478, together with the corresponding test methods.</p>"

43959,IS,,ISO 27020:2010,Dentistry — Brackets and tubes for use in orthodontics,Médecine bucco-dentaire — Consoles et tubes utilisés en orthodontie,2010-12-13,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[72549],"['en','fr']",11,"<p>ISO 27020:2010 is applicable to brackets and tubes for use in fixed orthodontic appliances.</p><p>ISO 27020:2010 gives details of methods to compare the functional dimensions of orthodontic brackets and tubes, the test methods by which they can be determined, as well as packaging and labelling information.</p>"

43960,IS,,ISO 27025:2010,Space systems — Programme management — Quality assurance requirements,Systèmes spatiaux — Management de programme — Exigences pour assurance qualité,2010-02-22,1,['49.140'],ISO/TC 20/SC 14,9599,,[85522],['en'],53,"<p>ISO 27025:2010 defines the quality assurance (QA) requirements for the establishment and implementation of QA programmes for projects covering mission definition, design, development, production and operations of space systems, including disposal.</p><p>It is applicable to the customer-supplier relationship for space products to the extent agreed by both parties. The requirements of this International Standard and its associated referenced standards are

43961,IS,,ISO 27026:2011,Space systems — Programme management — Breakdown of project management structures,Systèmes spatiaux — Management de programme — Éléments de structures de gestion de projet,2011-02-09,1,['49.140'],ISO/TC 20/SC 14,9599,,[85523],['en'],12,"<p>ISO 27026:2011 specifies processes, requirements and recommendations for the breakdown of project management structures, collectively called project breakdown structures, in terms of the various specification (i.e. requirements), functional, product, work, cost, business and organizational breakdown structures that are established and implemented to contribute to the success of a space programme, which is often composed of one or m

43962,IS,,ISO 27027:2008,Aerospace — Solid-state remote power controllers — General performance requirements,Aéronautique et espace — Contacteurs-disjoncteurs statiques commandés à distance — Exigences générales de performance,2008-04-22,1,['49.060'],ISO/TC 20/SC 1,9599,,[61032],['en'],13,"<p>ISO 27027:2008 specifies the definitions, general performance requirements and test methods to determine the performance of solid-state (remote) power controllers (SSPC) for use in aerospace electrical power systems.</p><p>The solid-state (remote) power controller consists of solid-state switching device(s) and associated solid-state circuitry for protection, action of control signals and providing sta

7668,IS,,ISO 2704:1982,Road vehicles — Spark plugs M 10 x 1 with flat seating and their cylinder head housing,Véhicules routiers — Bougies d'allumage M 10 x 1 à siège plat et leur logement dans la culasse,1982-12-01,3,['43.060.50'],ISO/TC 22,9599,,[7669],"['en','fr']",4,

7669,IS,,ISO 2704:1993,Road vehicles — M10 x 1 spark-plugs with flat seating and their cylinder head housing,Véhicules routiers — Bougies d'allumage M10 x 1 à siège plat et leur logement dans la culasse,1993-12-09,4,['43.060.50'],ISO/TC 22,9599,[7668],[26262],"['en','fr']",4,

7670,IS,,ISO 2705:1982,"Road vehicles — Spark plugs M 12 x 1,25 with flat seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M 12 x 1,25 à siège plat et leur logement dans la culasse",1982-12-01,3,['43.060.50'],ISO/TC 22,9599,,[7671],"['en','fr']",4,

7671,IS,,ISO 2705:1991,"Road vehicles — M12 x 1,25 spark-plugs with flat seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M12 x 1,25 à siège plat et leur logement dans la culasse",1991-12-18,4,['43.060.50'],ISO/TC 22,9599,[7670],[28663],"['en','fr']",4,

28663,IS,,ISO 2705:1999,"Road vehicles — M12 x 1,25 spark-plugs with flat seating and their cylinder head housings","Véhicules routiers — Bougies d'allumage M12 x 1,25 à siège plat et leurs logements dans la culasse",1999-12-16,5,['43.060.50'],ISO/TC 22,9599,[7671],[40977],"['en','fr']",5,

54133,IS,,ISO 27065:2011,Protective clothing — Performance requirements for protective clothing worn by operators applying liquid pesticides,Vêtements de protection — Exigences de performance pour les vêtements de protection portés par les opérateurs appliquant des pesticides liquides,2011-04-07,1,['13.340.10'],ISO/TC 94/SC 13,9599,,[65660],"['en','fr']",18,"<p>ISO 27065:2011 establishes minimum performance, classification, and labelling requirements for protective clothing worn by operators applying liquid pesticide products diluted in water. Protective clothing covered by ISO 27065:2011 includes, but is not limited to, shirts, jackets, trousers, coveralls, and spray-tight or liquid-tight g

7672,IS,,ISO 2707:1980,Micrographics — Transparent A6 size microfiche of uniform division — Image arrangements No. 1 and No. 2,Micrographie — Microfiche transparente de format A6 à partition uniforme — Dispositions d'images no. 1 et no. 2,1980-11-01,3,['37.080'],ISO/TC 171,9599,,[17808],"['en','fr']",8,

7673,IS,,ISO 2708:1980,Micrographics — Transparent A6 size microfiche of variable division — Image arrangements A and B,Micrographie — Microfiche transparente de format A6 à partition variable — Dispositions d'images A et B,1980-11-01,3,['37.080'],ISO/TC 171,9599,,[17808],"['en','fr']",9,

7674,IS,,ISO 2709:1981,Documentation — Format for bibliographic information interchange on magnetic tape,Documentation — Disposition des données sur bande magnétique pour l'échange d'informations bibliographiques,1981-10-01,2,['35.240.30'],ISO/TC 46/SC 4,9599,,[7675],"['en','fr']",5,

7675,IS,,ISO 2709:1996,Information and documentation — Format for information exchange,Information et documentation — Format pour l'échange d'information,1996-08-15,3,['35.240.30'],ISO/TC 46/SC 4,9599,[7674],[41319],"['en','fr']",6,<p>Specifies the requirements for a generalized exchange format suitable for bibliographic descriptions. Describes a framework for communications between data processing systems. Replaces the second edition.</p>

7677,IS,,ISO 2710-1:2000,Reciprocating internal combustion engines — Vocabulary — Part 1: Terms for engine design and operation,Moteurs alternatifs à combustion interne — Vocabulaire — Partie 1: Termes relatifs à la conception et au fonctionnement du moteur,2000-08-24,1,"['01.040.27','27.020']",ISO/TC 70,9599,[7676],[70032],"['en','fr','ru']",38,

7676,IS,,ISO 2710:1978,Reciprocating internal combustion engines — Vocabulary,Moteurs alternatifs à combustion interne — Vocabulaire,1978-06-01,2,"['01.040.27','27.020']",ISO/TC 70,9599,,"[7677,21934]","['en','fr','ru']",22,

21934,IS,,ISO 2710-2:1999,Reciprocating internal combustion engines — Vocabulary — Part 2: Terms for engine maintenance,Moteurs alternatifs à combustion interne — Vocabulaire — Partie 2: Termes relatifs à la maintenance du moteur,1999-12-16,1,"['01.040.27','27.020']",ISO/TC 70,9599,[7676],[73999],"['en','fr','ru']",15,

7679,IS,,ISO 2711:1973,Information processing interchange — Representation of ordinal dates,Échange de données entre matériels de traitement de l'information — Représentation des dates ordinales,1973-01-01,1,"['35.240.63','01.140.30']",ISO/TC 154,9599,,[15903],"['en','fr']",2,

7680,IS,,ISO 2712:1973,Copper and copper alloys — Rockwell superficial hardness test (N and T scales),Cuivre et alliages de cuivre — Essai Rockwell de dureté superficielle (Échelles N et T),1973-11-01,1,['77.040.10'],ISO/TC 164/SC 3,9599,,[5496],"['en','fr']",7,

62012,IS,,ISO 27126:2014,"Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals — Specification","Tuyaux et flexibles multicouches (non vulcanisés) thermoplastiques pour le transfert des hydrocarbures, des solvants et des produits chimiques — Spécifications",2014-09-15,1,['83.140.40'],ISO/TC 45/SC 1,9599,,[80485],['en'],23,"<p>ISO 27126:2014 specifies requirements for four types of thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for carrying hydrocarbons, solvents and chemicals. It specifies bore sizes from 25 mm to 300 mm, working pressures from 0,4 MPa (4 bar) to 1,4 MPa (14 bar) and working temper

62013,IS,,ISO 27127:2014,Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas — Specification,Tuyaux et flexibles multicouches (non vulcanisés) thermoplastiques pour le transfert de gaz de pétrole liquide et de gaz naturel liquéfié — Spécifications,2014-06-24,1,"['83.140.40','75.200']",ISO/TC 45/SC 1,9599,,[80487],['en'],18,"<p>ISO 27127:2014 specifies requirements for two types of thermoplastic multi-layer (non-vulcanized) transfer hoses and hose assemblies for carrying liquefied petroleum gas and liquefied natural gas. Each type is subdivided into two classes, one for onshore duties, and the other for offsho