Withdrawn and superseded ISO standards — page 92 of 246

62777,IS,,ISO 27799:2016,Health informatics — Information security management in health using ISO/IEC 27002,Informatique de santé — Management de la sécurité de l'information relative à la santé en utilisant l'ISO/IEC 27002,2016-07-01,2,['35.240.80'],ISO/TC 215,9599,[41298],[84647],"['en','fr']",99,"<p>ISO 27799:2016 gives guidelines for organizational information security standards and information security management practices including the selection, implementation and management of controls taking into consideration the organization's information security risk environment(s).</p><p>It defines guidelines to support the interpretation and implementation in health informatics of ISO/IEC 2700

7762,IS,,ISO 2780:1973,Milling cutters with tenon drive — Interchangeability dimensions with cutter arbors — Metric series,Fraises à métaux à entraînement par tenons — Dimensions d'interchangeabilité avec les mandrins porte-fraise — Série métrique,1973-02-01,1,['25.100.20'],ISO/TC 29,9599,,[7763],"['en','fr']",3,

7763,IS,,ISO 2780:1986,Milling cutters with tenon drive — Interchangeability dimensions with cutter arbors — Metric series,Fraises à métaux à entraînement par tenons — Dimensions d'interchangeabilité avec les mandrins porte-fraise — Série métrique,1986-11-13,2,['25.100.20'],ISO/TC 29,9599,[7762],[42237],"['en','fr']",4,

42237,IS,,ISO 2780:2006,Milling cutters with tenon drive — Interchangeability dimensions for cutter arbors — Metric series,Fraises à métaux à entraînement par tenons — Dimensions d'interchangeabilité avec les mandrins porte-fraise — Série métrique,2006-12-01,3,['25.100.20'],ISO/TC 29/SC 9,9599,[7763],[75801],"['en','fr']",6,"<p>ISO 2780:2006 specifies the dimensions for interchangeability between milling cutters with tenon drive and the cutter seating of cutter arbors. </p><p>It is applicable only to milling cutters of the metric series.</p><p>It gives the interchangeability dimensions for the milling cutters, the cutter seating on the arbor, and the cutter retaining screw on the cutter arbo

7764,IS,,ISO 2781:1981,"Rubber, vulcanized — Determination of density",Caoutchouc vulcanisé — Détermination de la masse volumique,1981-12-01,2,['83.060'],ISO/TC 45,9599,,[7765],"['en','fr']",3,

7765,IS,,ISO 2781:1988,"Rubber, vulcanized — Determination of density",Caoutchouc vulcanisé — Détermination de la masse volumique,1988-11-24,3,['83.060'],ISO/TC 45/SC 2,9599,[7764],"[41456,43668]","['en','fr']",3,<p>Describes two methods. The determination is important in the control of the quality of a rubber compound and in the calculation of the mass of rubber required to produce a given volume of vulcanizate. Does not cover the relative density of rubber. Gravitational forces under different conditions are observed and expressed in units of mass. - Replaces the second edition (ISO 2781:1981).</p>

23837,IS,Cor,ISO 2781:1988/Cor 1:1996,"Rubber, vulcanized — Determination of density — Technical Corrigendum 1",Caoutchouc vulcanisé — Détermination de la masse volumique — Rectificatif technique 1,1996-06-06,3,['83.060'],ISO/TC 45/SC 2,9599,,"[41456,43668]",['en'],1,<p>Replaces in note 4 to subclause 9.2 industrial methylated spirits by denaturated spirit.</p>

43668,IS,,ISO 2781:2008,"Rubber, vulcanized or thermoplastic — Determination of density",Caoutchouc vulcanisé ou thermoplastique — Détermination de la masse volumique,2008-04-22,4,['83.060'],ISO/TC 45/SC 2,9599,"[7765,23837]",[72777],"['en','fr','ru']",6,"<p>ISO 2781:2008 specifies two methods of test for the determination of the density of solid vulcanized and thermoplastic rubbers.</p><p>Such determinations are of importance in the control of the quality of a rubber compound and in the calculation of the mass of rubber required to produce a given volume of material.</p><p>The standard does not cover the determination of the relative density of rubber, which is the ratio of the mass of a gi

53039,IS,Amd,ISO 2781:2008/Amd 1:2010,"Rubber, vulcanized or thermoplastic — Determination of density — Amendment 1: Precision data",Caoutchouc vulcanisé ou thermoplastique — Détermination de la masse volumique — Amendement 1: Données de fidélité,2010-07-08,4,['83.060'],ISO/TC 45/SC 2,9599,,[72777],"['en','fr']",3,

55600,IS,,ISO 2782-1:2012,"Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 1: Differential-pressure methods",Caoutchouc vulcanisé ou thermoplastique — Détermination de la perméabilité aux gaz — Partie 1: Méthodes à pression différentielle,2012-05-25,1,['83.060'],ISO/TC 45/SC 2,9599,[43674],[63792],"['en','fr']",14,

63792,IS,,ISO 2782-1:2016,"Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 1: Differential-pressure methods",Caoutchouc vulcanisé ou thermoplastique — Détermination de la perméabilité aux gaz — Partie 1: Méthodes à pression différentielle,2016-04-08,2,['83.060'],ISO/TC 45/SC 2,9599,[55600],[84136],"['en','fr']",18,"<p>ISO 2782-1:2016 specifies three methods for the determination of the permeability to gases of vulcanized or thermoplastic rubber under a differential partial pressure.</p><p>The three methods specified are as follows:</p><p>- pressure sensor method (using vacuum): for determining the gas transmission rate, gas permeability coefficient, g

7766,IS,,ISO 2782:1977,"Rubber, vulcanized — Determination of permeability to gases — Constant pressure method",Caoutchouc vulcanisé — Détermination de la perméabilité aux gaz — Méthode de la pression constante,1977-12-01,1,['83.060'],ISO/TC 45/SC 2,9599,,[7767],"['en','fr']",5,

7767,IS,,ISO 2782:1995,"Rubber, vulcanized or thermoplastic — Determination of permeability to gases",Caoutchouc vulcanisé ou thermoplastique — Détermination de la perméabilité aux gaz,1995-05-18,2,['83.060'],ISO/TC 45/SC 2,9599,"[7766,5985]",[43674],"['en','fr']",10,"<p>Cancels and replaces the first edition (1977). Describes two procedures for measuring the permeability of rubber to gases under steady-state conditions. One uses a horizontal measuring device for measurements at constant pressure and the other uses a vertical measuring device for measurements at constant volume or constant pressure. The procedures apply to solid rubber of hardness not less than 35 IRHD and to gases such as a

55601,IS,,ISO 2782-2:2012,"Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 2: Equal-pressure method",Caoutchouc vulcanisé ou thermoplastique — Détermination de la perméabilité aux gaz — Partie 2: Méthode équi-pression,2012-05-25,1,['83.060'],ISO/TC 45/SC 2,9599,[43674],[74939],"['en','fr']",7,

43674,IS,,ISO 2782:2006,"Rubber, vulcanized or thermoplastic — Determination of permeability to gases",Caoutchouc vulcanisé ou thermoplastique — Détermination de la perméabilité aux gaz,2006-10-12,3,['83.060'],ISO/TC 45/SC 2,9599,[7767],"[55600,55601]","['en','fr']",14,"<p>ISO 2782:2006 describes two procedures for measuring the permeability of rubber to gases under steady-state conditions. One uses a horizontal measuring device for measurements at constant pressure and the other uses a vertical measuring device for measurements at constant volume or constant pressure. The results obtained by these procedures may be extrapolated to thicknesses of material different from that of the test piec

44345,IS,,ISO 27830:2008,Metallic and other inorganic coatings — Guidelines for specifying metallic and inorganic coatings,Revêtements métalliques et autres revêtements inorganiques — Lignes directrices pour spécifier des revêtements métalliques et inorganiques,2008-08-11,1,"['25.220.20','25.220.40']",ISO/TC 107/SC 3,9599,,[66504],"['en','fr','ru']",13,"<p>ISO 27830:2008 specifies the technical requirements of metallic and other inorganic coatings in order to develop consistent technical standards and establishes a standard format for designating the coatings. It applies to International Standards for electrodeposited, autocatalytic and vapour deposited coatings.</p>"

7770,IS,,ISO 2785:1974,Guide to the selection of asbestos-cement pipes subject to external loads with of without internal pressure,Guide en vue du choix des tuyaux en amiante-ciment soumis à des charges extérieures avec ou sans pression intérieure,1974-10-01,1,"['23.040.50','91.100.40']",ISO/TC 77,9599,,[7771],['en'],49,

44388,IS,,ISO 27852:2011,Space systems — Estimation of orbit lifetime,Systèmes spatiaux — Estimation de la durée de vie en orbite,2011-07-13,1,['49.140'],ISO/TC 20/SC 14,9599,,[68572],['en'],28,"<p>ISO 27852:2011 describes a process for the estimation of orbit lifetime for satellites, launch vehicles, upper stages and associated debris in LEO-crossing orbits.</p><p>ISO 27852:2011 also clarifies the modelling approaches and resources for solar and geomagnetic activity modelling; the resources for atmosphere model selection; and an approach for satellite ballistic coefficient estimation.</p>"

68572,IS,,ISO 27852:2016,Space systems — Estimation of orbit lifetime,Systèmes spatiaux — Estimation de la durée de vie en orbite,2016-07-04,2,['49.140'],ISO/TC 20/SC 14,9599,[44388],[85364],['en'],43,"<p>ISO 27852:2016 describes a process for the estimation of orbit lifetime for spacecraft, launch vehicles, upper stages and associated debris in LEO-crossing orbits.</p><p>It also clarifies the following:</p><p>a) modelling approaches and resources for solar and geomagnetic activity modelling;</p><p>b) resources for atmosphere model selection;</p><p>c) approaches for spacecraft ballistic coefficient estimation.</p>"

44393,IS,,ISO 27875:2010,Space systems — Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages,Systèmes spatiaux — Gestion du risque de la rentrée pour les étapes orbitales des véhicules spatiaux non habités et des lanceurs spatiaux,2010-02-23,1,['49.140'],ISO/TC 20/SC 14,9599,,[74251],['en'],12,"<p>ISO 27875:2010 provides a framework with which to assess, reduce and control the potential risks that spacecraft and launch vehicle orbital stages pose to people and the environment when those space vehicles re-enter the Earth's atmosphere and impact the Earth's surface. It is intended to be applied to the planning, design and review of space vehicle missions for whic

69755,IS,Amd,ISO 27875:2010/Amd 1:2016,Space systems — Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages — Amendment 1,Systèmes spatiaux — Gestion du risque de la rentrée pour les étapes orbitales des véhicules spatiaux non habités et des lanceurs spatiaux — Amendement 1,2016-03-21,1,['49.140'],ISO/TC 20/SC 14,9599,,[74251],['en'],2,

74251,IS,,ISO 27875:2019,Space systems — Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages,Systèmes spatiaux — Gestion du risque de la rentrée pour les étapes orbitales des véhicules spatiaux non habités et des lanceurs spatiaux,2019-02-01,2,['49.140'],ISO/TC 20/SC 14,9599,"[44393,69755]",[87629],['en'],23,"<p>This document provides a framework with which to assess, reduce, and control the potential risks that spacecraft and launch vehicle orbital stages (referred to hereinafter as 'space vehicles') pose to people and the environment when those space vehicles re-enter the Earth's atmosphere and impact the Earth's surface. It is intended to be applied to the p

80027,IS,Amd,ISO 27875:2019/Amd 1:2020,"Space systems — Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages — Amendment 1: Formula to obtain Ec by the product of the probability of impact on a specific latitude band, and the population within the band, which is integrated over the latitude range covered by the orbital inclination","Systèmes spatiaux — Gestion du risque de la rentrée pour les étapes orbitales des véhicules spatiaux non habités et des lanceurs spatiaux — Amendement 1: Formule pour calculer les pertes humaines attendues (Ec) via le produit de la probabilité d'impact sur une bande de latitude spécifique et de la population de cette bande, qui est i

7775,IS,,ISO 2788:1974,Documentation — Guidelines for the establishment and development of monolingual thesauri,Documentation — Principes directeurs pour l'établissement et le développement de thesaurus monolingues,1974-08-01,1,['01.140.20'],ISO/TC 46,9599,,[7776],"['en','fr']",13,

7776,IS,,ISO 2788:1986,Documentation — Guidelines for the establishment and development of monolingual thesauri,Documentation — Principes directeurs pour l'établissement et le développement de thésaurus monolingues,1986-11-20,2,['01.140.20'],ISO/TC 46/SC 9,9599,[7775],"[53658,46037,53657]","['en','fr']",32,"<p>The recommendations are intended to ensure consistent practice within a single indexing agency, or between different agencies (for example members of a network). These recommendations relate to monolingual thesauri, without reference to the special requirements of multilingual thesauri.</p>"

7777,IS,,ISO 2789:1974,International library statistics,Statistiques internationales de bibliothèques,1974-02-01,1,['01.140.20'],ISO/TC 46/SC 8,9599,,[7778],"['en','fr']",4,

7778,IS,,ISO 2789:1991,Information and documentation — International library statistics,Information et documentation — Statistiques internationales de bibliothèques,1991-04-25,2,['01.140.20'],ISO/TC 46/SC 8,9599,[7777],[28236],"['en','fr']",9,<p>This second edition cancels and replaces the first edition (ISO 2789:1974). Aims at giving guidance to the international library community on the keeping of library statistics for the purposes of international reporting. ISO 2789 was prepared in a close cooperation between UNESCO and ISO. It will have the effect that statistics produced by different libraries will be more directly comparable. The definitions presented are designed for statistical pur

28236,IS,,ISO 2789:2003,Information and documentation — International library statistics,Information et documentation — Statistiques internationales de bibliothèques,2003-02-06,3,['01.140.20'],ISO/TC 46/SC 8,9599,[7778],[39181],"['en','fr']",52,"<p>ISO 2789:2003 provides guidance for the library and information services community on the collection and reporting of statistics for the purposes of international reporting, to ensure conformity between countries for those statistical measures that are frequently used by library managers but do not qualify for international reporting, to encourage good practice in the use of statistics for the management of library and information services, and to

39181,IS,,ISO 2789:2006,Information and documentation — International library statistics,Information et documentation — Statistiques internationales de bibliothèques,2006-09-22,4,['01.140.20'],ISO/TC 46/SC 8,9599,[28236],[60680],"['en','fr']",61,"<p>ISO 2789:2006 specifies rules for the library and information services community on the collection and reporting of statistics</p><ul><li>for the purposes of international reporting,</li><li>to ensure conformity between countries for those statistical measures that are frequently used by library managers but do not qualify for international reporting,</li><li>to encourage good practice in the use of statistics for the management of library and in

60680,IS,,ISO 2789:2013,Information and documentation — International library statistics,Information et documentation — Statistiques internationales de bibliothèques,2013-08-21,5,['01.140.20'],ISO/TC 46/SC 8,9599,[39181],[78525],"['en','fr']",71,"<p>ISO 2789:2013 specifies rules for the library and information services community on the collection and reporting of statistics:</p><p>for the purposes of international reporting;</p><p>to ensure conformity between countries for those statistical measures that are frequently used by library managers, but do not qualify for international reporting;</p><p>to encourage good practice in the use of statistics for the management of library and informati

58068,IS,,ISO 27893:2011,Vacuum technology — Vacuum gauges — Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge,Technique du vide — Manomètres à vide — Évaluation de l'incertitude des résultats des étalonnages par comparaison directe avec un manomètre de référence,2011-08-10,1,['23.160'],ISO/TC 112,9599,[44416],[85889],"['en','fr']",15,"<p>ISO 27893:2011 gives guidelines for the determination and reporting of measurement uncertainties arising during vacuum gauge calibration by direct comparison with a reference gauge carried out in accordance with ISO/TS 3567. </p><p>ISO 27893:2011 describes methods for uniform reporting of uncertainties in

4191,IS,,ISO 279:1981,Essential oils — Determination of relative density at 20 degrees C (Reference method),Huiles essentielles — Détermination de la densité relative à 20 degrés C (Méthode de référence),1981-04-01,1,['71.100.60'],ISO/TC 54,9599,,[25308],"['en','fr']",2,

7779,IS,,ISO 2790:1982,Narrow V-belt drives for the automotive industry — Dimensions,Transmissions par courroies trapézoïdales étroites pour la construction automobile — Dimensions,1982-11-01,2,['43.060.10'],ISO/TC 41/SC 1,9599,,[7780],"['en','fr']",4,

7780,IS,,ISO 2790:1989,Belt drives — Narrow V-belts for the automotive industry and corresponding pulleys — Dimensions,Transmissions par courroies — Courroies trapézoïdales étroites pour la construction automobile et poulies correspondantes — Dimensions,1989-08-17,3,['43.060.10'],ISO/TC 41/SC 1,9599,[7779],[37879],"['en','fr']",4,<p>This third edition cancels and replaces the second edition (1982). Specifies the requirements for belts and pulleys used for driving auxiliaries of internal combustion engines. Tabulates dimensions for various quantities (five tables). Some figures illustrate shapes and reference quantities of concern.</p>

37879,IS,,ISO 2790:2004,Belt drives — V-belts for the automotive industry and corresponding pulleys — Dimensions,Transmissions par courroies — Courroies trapézoïdales pour la construction automobile et poulies correspondantes — Dimensions,2004-09-22,4,['43.060.10'],ISO/TC 41/SC 1,9599,[7780],[70614],"['en','fr']",7,<p>ISO 2790:2004 specifies the requirements for belts and pulleys for V-belt drive used for driving auxiliaries of the internal combustion engines for the automotive industry.</p>

7781,IS,,ISO 2791:1973,Bow shackles,Manilles lyre,1973-12-01,1,['53.020.30'],ISO/TC 111,9599,,[7316],"['en','fr']",3,

64235,IS,,ISO 27913:2016,"Carbon dioxide capture, transportation and geological storage — Pipeline transportation systems","Captage du dioxyde de carbone, transport et stockage géologique — Systèmes de transport par conduites",2016-10-27,1,['13.020.40'],ISO/TC 265,9599,,[84840],"['en','fr']",35,"<p>ISO 27913:2016 specifies additional requirements and recommendations not covered in existing pipeline standards for the transportation of CO₂ streams from the capture site to the storage facility where it is primarily stored in a geological formation or used for other purposes (e.g. for EOR or CO₂ use).</p><p>ISO 27913:2016 applies to</p><p>- rigid metallic pipelines,</p

64148,IS,,ISO 27914:2017,"Carbon dioxide capture, transportation and geological storage — Geological storage","Capture, transport et stockage géologique du dioxyde de carbone — Stockage géologique",2017-10-13,1,['13.020.40'],ISO/TC 265,9599,,[84578],"['en','fr']",59,"<p>ISO 27914:2017</p><p>a) establishes requirements and recommendations for the geological storage of CO₂ streams, the purpose of which is to promote commercial, safe, long-term containment of carbon dioxide in a way that minimizes risk to the environment, natural resources, and human health,</p><p>b) is applicable for both onshore and offshore geological storage within permeable and porous geological strata inc

65937,IS,,ISO 27916:2019,"Carbon dioxide capture, transportation and geological storage — Carbon dioxide storage using enhanced oil recovery (CO2-EOR)","Captage, transport et stockage géologique du dioxyde de carbone — Stockage du dioxyde de carbone au moyen de la récupération assistée du pétrole (RAP-CO2)",2019-01-30,1,['13.020.40'],ISO/TC 265,9599,,[89142],"['en','fr']",55,"1.1 Applicability <p>This document applies to carbon dioxide (CO2) that is injected in enhanced recovery operations for oil and other hydrocarbons (CO2-EOR) for which quantification of CO2 that is safely stored long-term in association with the CO2-EOR project is sought. Recognizing that some CO2-EOR projects use non-

7782,IS,,ISO 2795:1979,Plain bearings made from sintered material — Dimensions and tolerances,Paliers lisses — Coussinets frittés — Dimensions et tolérances,1979-10-01,2,['21.100.10'],ISO/TC 123,9599,,[7783],"['en','fr']",4,

7783,IS,,ISO 2795:1986,Plain bearings made from sintered material — Dimensions and tolerances,Paliers lisses — Coussinets frittés — Dimensions et tolérances,1986-05-15,3,['21.100.10'],ISO/TC 123/SC 3,9599,[7782],[7784],"['en','fr']",4,

7784,IS,,ISO 2795:1991,Plain bearings — Sintered bushes — Dimensions and tolerances,Paliers lisses — Coussinets frittés — Dimensions et tolérances,1991-10-24,4,['21.100.10'],ISO/TC 123/SC 7,9599,[7783],[63628],"['en','fr']",5,<p>Applies to sintered bearings for inside diameters as follows: cylindrical bearings: 1 mm to 60 mm; flanged bearings: 1 mm to 60 mm; spherical bearings: 1 mm to 20 mm. This fourth edition cancels and replaces the third edition (1986).</p>

63628,IS,,ISO 2795:2014,Plain bearings — Sintered bushes — Dimensions and tolerances,Paliers lisses — Coussinets frittés — Dimensions et tolérances,2014-01-17,5,['21.100.10'],ISO/TC 123/SC 7,9599,[7784],[80086],['en'],9,<p>ISO 2795:2014 specifies the dimensions and tolerances applicable to sintered bearings for the following ranges of inside diameters:</p><ul><li>cylindrical bearings: 1 mm to 60 mm;</li><li>flanged bearings: 1 mm to 60 mm;</li><li>spherical bearings: 1 mm to 20 mm.</li></ul>

7785,IS,,ISO 2796:1980,Cellular plastics — Test for dimensional stability of rigid materials,Plastiques alvéolaires — Essai de stabilité dimensionnelle des matériaux rigides,1980-12-01,2,['83.100'],ISO/TC 61,9599,,[7786],"['en','fr']",3,

7787,IS,,ISO 2797:1974,Textile glass — Rovings — Basis for specification,Verre textile — Stratifils — Base de spécifications,1974-11-01,1,['59.100.10'],ISO/TC 61,9599,,[7788],"['en','fr']",3,

7788,IS,,ISO 2797:1986,Textile glass — Rovings — Basis for a specification,Verre textile — Stratifils — Base de spécification,1986-08-28,2,['59.100.10'],ISO/TC 61/SC 13,9599,[7787],"[25211,74001]","['en','fr']",3,"<p>Is intended to serve as a guide for the establishment of technical specifications for products of given type. Rovings are divided in two main groups: - rovings that are chopped during subsequent operations - rovings that are utilized without being chopped The following particulars are mentioned and the relevant International Standards are quoted: Designation, type of glass, filament diameter, linear density, size and size content, properties and methods of test, delivery and pac

44449,IS,,ISO 27971:2008,Cereals and cereal products — Common wheat (Triticum aestivum L.) — Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology,Céréales et produits céréaliers — Blé tendre (Triticum aestivum L.) — Détermination des propriétés alvéographiques d'une pâte à hydratation constante de farine industrielle ou d'essai et méthodologie pour la mouture d'essai,2008-05-14,1,['67.060'],ISO/TC 34/SC 4,9599,[28326],[63535],"['en','fr']",52,"<p>ISO 27971:2008 specifies a method of using an alveograph to determine the rheological properties of different types of dough obtained from “soft” to “hard” wheat flour (<i>

63535,IS,,ISO 27971:2015,Cereals and cereal products — Common wheat (Triticum aestivum L.) — Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology,Céréales et produits céréaliers — Blé tendre (Triticum aestivum L.) — Détermination des propriétés alvéographiques d'une pâte à hydratation constante de farine industrielle ou d'essai et méthodologie pour la mouture d'essai,2015-06-01,2,['67.060'],ISO/TC 34/SC 4,9599,[44449],[82591],"['en','fr']",65,"<p>ISO 27971:2015 specifies a method of determining, using an alveograph, the rheological properties of different types of dough obtained from common wheat flour (<i>Triticum

7789,IS,,ISO 2798:1974,Withdrawal of ISO 2798-1974,Annulation de l'ISO 2798-1974,1974-08-01,1,['83.100'],ISO/TC 61,9599,,[5548],"['en','fr']",4,

44461,IS,,ISO 27996:2009,Aerospace fluid systems — Elastomer seals — Storage and shelf life,Systèmes de fluides pour l'aéronautique et l'espace — Joints élastomères — Stockage et durée de conservation,2009-02-03,1,"['83.140.50','49.080']",ISO/TC 20/SC 10,9599,,"[84537,67043]",['en'],8,"<p>ISO 27996:2009 is applicable to the general requirements for data recording procedures, packaging, and storing of elastomeric seals and seal assemblies which include an elastomeric element prior to the seal being assembled into hardware components.</p><p>The requirements for packaging are an integral part of the controlled storage procedure and provide a means of positive product identity from the time of m

4192,IS,,ISO 280:1976,Essential oils — Determination of refractive index,Huiles essentielles — Détermination de l'indice de réfraction,1976-12-01,1,['71.100.60'],ISO/TC 54,9599,,[25309],"['en','fr']",2,

44641,IS,,ISO 28000:2007,Specification for security management systems for the supply chain,Spécifications relatives aux systèmes de management de la sûreté de la chaîne d'approvisionnement,2007-09-21,1,"['03.100.70','03.100.01']",ISO/TC 292,9599,[41921],[79612],"['en','fr','ru']",16,"<p>ISO 28000:2007 specifies the requirements for a security management system, including those aspects critical to security assurance of the supply chain. Security management is linked to many other aspects of business management. Aspects include all activities controlled or influenced by organizations that impact on supply chain security. These other aspects should be considered directly, where and when they h

54105,IS,,ISO 28005-1:2013,Security management systems for the supply chain — Electronic port clearance (EPC) — Part 1: Message structures,Systèmes de management de la sécurité pour la chaîne d'approvisionnement — Opérations portuaires assistées par systèmes électroniques — Partie 1: Structures des messages,2013-02-25,1,"['35.240.60','47.020.99']",ISO/TC 8/SC 11,9599,[61323],[83881],"['en','ru']",28,"<p>1 Scope</p><p>This part of ISO 28005 specifies necessary guidance information related to electronic port clearance (EPC), such as message transmission requirements, business scenarios, message structures and software requirements. Within the context of this part of ISO 28005, EPC incudes the

42144,IS,,ISO 28005-2:2011,Security management systems for the supply chain — Electronic port clearance (EPC) — Part 2: Core data elements,Systèmes de management de la sécurité pour la chaîne d'approvisionnement — Opérations portuaires assistées par systèmes électroniques — Partie 2: Éléments de données principaux,2011-02-25,1,"['35.240.60','47.020.99']",ISO/TC 8/SC 11,9599,[54501],[74059],['en'],81,"<p>ISO 28005-2:2011 contains technical specifications that facilitate efficient exchange of electronic information between ships and shore for coastal transit or port calls. It is intended to cover safety and security information requirements related mainly to the relationships between the ship

7792,IS,,ISO 2801:1973,Clothing for protection against heat and fire — General recommendations for users and for those in charge of such users,Vêtements de protection contre la chaleur et le feu — Recommandations générale pour les utilisateurs et leurs responsables,1973-12-01,1,['13.340.10'],ISO/TC 94/SC 13,9599,,[7793],"['en','fr']",4,

7793,IS,,ISO 2801:1998,"Clothing for protection against heat and flame — General recommendations for selection, care and use of protective clothing","Vêtements de protection contre la chaleur et la flamme — Recommandations générales pour la sélection, l'entretien et l'utilisation des vêtements de protection",1998-07-23,2,['13.340.10'],ISO/TC 94/SC 13,9599,[7792],[39087],"['en','fr']",6,

44466,IS,,ISO 28017:2009,"Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification","Tuyaux et flexibles en caoutchouc, à armature textile ou métallique, pour des applications de dragage — Spécifications",2009-07-16,1,['83.140.40'],ISO/TC 45/SC 1,9599,,[55657],['en'],13,"<p>ISO 28017:2009 specifies requirements for two types, seven classes and three grades of wire- or textile-reinforced dredging hoses with nominal sizes ranging from 100 to 1 200. Within each class, all grades and sizes have the same maximum working pressure. Such hoses are suitable for the delivery or suction of seawater, freshwater, silt, sand, coral and small stones with a spe

55657,IS,,ISO 28017:2011,"Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification","Tuyaux et flexibles en caoutchouc, à armature textile ou métallique, pour des applications de dragage — Spécifications",2011-11-15,2,['83.140.40'],ISO/TC 45/SC 1,9599,[44466],[72842],"['en','fr']",16,"<p>ISO 28017:2011 specifies requirements for two types, seven classes and three grades of wire- or textile-reinforced dredging hoses with nominal sizes ranging from 100 to 1 200. Within each class, all grades and sizes have the same maximum working pressure. Such hoses are suitable for the delivery or suction of seawater or freshwater mixed with silt, sand, coral a

65377,IS,Amd,ISO 28017:2011/Amd 1:2015,"Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification — Amendment 1","Tuyaux et flexibles en caoutchouc, à armature textile ou métallique, pour des applications de dragage — Spécifications — Amendement 1",2015-02-10,2,['83.140.40'],ISO/TC 45/SC 1,9599,,[72842],"['en','fr']",1,

72842,IS,,ISO 28017:2018,"Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification","Tuyaux et flexibles en caoutchouc, à armature textile ou métallique, pour des applications de dragage — Spécifications",2018-02-08,3,['83.140.40'],ISO/TC 45/SC 1,9599,"[55657,65377]",[89407],"['en','fr']",18,"<p>ISO 28017:2018 specifies requirements for two types, seven classes and three grades of wire- or textile-reinforced dredging hoses with nominal sizes ranging from 100 to 1 200. Within each class, all grades and sizes have the same maximum working pressure. Such hoses are suitable for the delivery or suction of seawater or freshwater mixed with silt, sand,

7794,IS,,ISO 2802:1974,Textile machinery and accessories — Plastic travellers for spinning and twisting,Matériel pour l'industrie textile — Curseurs en matière plastique pour anneaux de continus à filer et à retordre,1974-03-01,1,['59.120.10'],ISO/TC 72/SC 1,9599,,[3763],"['en','fr']",2,

7795,IS,,ISO 2803:1974,Photography — Silver-gelatin type microfilms — Processing and storage for archival purposes,Photographie — Microcopies gélatino- argentiques sur film — Traitement et conservation pour archivage,1974-07-01,1,['37.040.20'],ISO/TC 42,9599,,"[10207,11512,10209]","['en','fr']",4,

7796,IS,,ISO 2804:1973,"Wire, bar or tube drawing dies — As sintered pellets of hard metal (carbide) — Dimensions",Filières de tréfilage et d'étirage — Noyaux bruts en carbures métalliques durs — Dimensions,1973-12-01,1,['25.120.20'],ISO/TC 29,9599,,[25966],"['en','fr']",6,

44482,IS,,ISO 28057:2014,Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy,Dosimétrie avec détecteurs de thermolumiscence solides pour le photon et rayonnements d'électron en radiothérapie,2014-02-24,1,['13.280'],ISO/TC 85/SC 2,9599,,[71211],"['en','fr']",40,"<p>ISO 28057:2014 describes rules for the procedures, applications, and systems of thermoluminescence dosimetry (TLD) for dose measurements according to the probe method. It is particularly applicable to solid 'TL detectors', i.e. rods, chips, and microcubes, made from LiF:Mg,Ti or LiF:Mg,Cu,P in crystalline or polycrystalline form. The probe method encompasses the arrangement, particul

7797,IS,,ISO 2806:1980,Numerical control of machines — Vocabulary,Commande numérique des machines — Vocabulaire,1980-12-01,1,"['25.040.20','01.040.25']",ISO/TC 184/SC 1,9599,,[7798],"['en','fr']",25,

44492,IS,,ISO 28077:2006,Photocarcinogenesis action spectrum (non-melanoma skin cancers),Spectre d'action de la photocarcinogenèse (cancers de la peau hors mélanome),2006-12-14,1,"['13.280','17.180.20']",CIE,9599,,[69651],"['en','fr']",8,<p>ISO/CIE 28077:2006 specifies the action spectrum for photocarcinogenesis of non-melanoma skin cancers.</p>

44506,IS,,ISO 28078-1:2009,Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Matériaux pour moulage et extrusion en poly(phénylène sulfide) (PPS) — Partie 1: Système de désignation et base de spécification,2009-10-08,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[68367],"['en','ru']",7,"<p>ISO 28078-1:2009 establishes a system of designation for PPS thermoplastic materials, which may be used as the basis for specifications.</p><p>The types of PPS plastic are differentiated from each other by a classification system based on appropriate levels of the designatory properties</p><ul><li>melt mass-flow rate or m

44494,IS,,ISO 28078-2:2009,Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériaux pour moulage et extrusion en poly(phénylène sulfide) (PPS) — Partie 2: Préparation des éprouvettes et détermination des propriétés,2009-10-08,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[68368],"['en','ru']",5,"<p>ISO 28078-2:2009 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of poly(phenylene sulfide) moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding an

44495,IS,,ISO 28079:2009,Hardmetals — Palmqvist toughness test,Métaux durs — Méthode d'essai de dureté de Palmqvist,2009-07-14,1,"['77.160','77.040.10']",ISO/TC 119/SC 4,9599,,[85769],['en'],11,"<p>ISO 28079:2009 specifies a method for measuring the Palmqvist toughness of hardmetals and cermets at room temperature by an indentation method. ISO 28079:2009 applies to a measurement of toughness, called Palmqvist toughness, calculated from the total length of cracks emanating from the corners of a Vickers hardness indentation, and it is intended for use with metal-bonded carbides and carbonitrides (normally called hardmetals, cermets or cemented carbides). The test procedures proposed in ISO 280

7799,IS,,ISO 2808:1974,Paints and varnishes — Determination of film thickness,Peintures et vernis — Détermination de l'épaisseur du feuil,1974-07-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[7800],"['en','fr']",10,

7800,IS,,ISO 2808:1991,Paints and varnishes — Determination of film thickness,Peintures et vernis — Détermination de l'épaisseur du feuil,1991-12-12,2,['87.040'],ISO/TC 35/SC 9,9599,[7799],[20722],"['en','fr']",17,

20722,IS,,ISO 2808:1997,Paints and varnishes — Determination of film thickness,Peintures et vernis — Détermination de l'épaisseur du feuil,1997-09-18,3,['87.040'],ISO/TC 35/SC 9,9599,[7800],[37486],"['en','fr']",33,

37486,IS,,ISO 2808:2007,Paints and varnishes — Determination of film thickness,Peintures et vernis — Détermination de l'épaisseur du feuil,2007-01-15,4,['87.040'],ISO/TC 35/SC 9,9599,[20722],[71583],"['en','fr']",38,"<p>ISO 2808:2007 describes a number of methods that are applicable to the measurement of the thickness of coatings applied to a substrate. Methods for determining wet-film thickness, dry-film thickness and the film thickness of uncured powder layers are described. Reference is made to individual standards where these exist. Otherwise the method is described in detail.</p><p>The standard also defines terms concerning the determination of film thickness.</p>"

44496,IS,,ISO 28080:2011,Hardmetals — Abrasion tests for hardmetals,Métaux-durs — Méthodes d'essai d'abrasion des métaux-durs,2011-01-25,1,"['77.160','77.040.10']",ISO/TC 119/SC 4,9599,,[72769],"['en','ru']",13,"<p>ISO 28080:2011 specifies a generic test method to determine the abrasion wear characteristics of hardmetals. </p><p>The procedure complements the ASTM G65 method for dry sand/rubber wheel abrasion, the ASTM B611 method for abrasive wear resistance of cemented carbides, and the ASTM G105 method for conducting wet sand/rubber wheel abrasion tests.</p><p>The test is appropriate for use in situations where test laboratories have a need to simulate abrasive damage. The procedure includ

7801,IS,,ISO 2809:1976,Paints and varnishes — Determination of light fastness of paints for interior use,Peintures et vernis — Détermination de la solidité à la lumière des peintures d'intérieur,1976-09-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[33045],"['en','fr']",3,<p>Specifies a method for operating laboratory equment. It does not attempt to define either the minimum accetable standard or the precise techniques to be adopted for the test; these are to be the subject of agreement between the interested parties. The posible forms which the test requirement may take are the following: The test material shall be at least as ligthfast as a specified wool scale pattern exposed simultaneously or an

4194,IS,,ISO 281-1:1977,Rolling bearings — Dynamic load ratings and rating life — Part 1: Calculation methods,Roulements — Charges dynamiques de base et durée nominale — Partie 1: Méthodes de calcul,1977-03-01,1,['21.100.20'],ISO/TC 4,9599,,[4193],"['en','fr']",10,

4193,IS,,ISO 281:1990,Rolling bearings — Dynamic load ratings and rating life,Roulements — Charges dynamiques de base et durée nominale,1990-11-22,1,['21.100.20'],ISO/TC 4/SC 8,9599,[4194],[38102],"['en','fr']",12,"<p>Specifies methods of calculating the basic dynamic load rating of rolling bearings, manufactured from hardened steel, as well as the basic rating life and the adjusted rating life. Does not apply to designs where the rolling elements operate directly on a shaft or housing surface.</p>"

29763,IS,Amd,ISO 281:1990/Amd 1:2000,Rolling bearings — Dynamic load ratings and rating life — Amendment 1,Roulements — Charges dynamiques de base et durée nominale — Amendement 1,2000-02-24,1,['21.100.20'],ISO/TC 4/SC 8,9599,,[38102],"['en','fr']",1,

32470,IS,Amd,ISO 281:1990/Amd 2:2000,Rolling bearings — Dynamic load ratings and rating life — Amendment 2: Life modification factor aXYZ,Roulements — Charges dynamiques de base et durée nominale — Amendement 2: Facteur aXYZ de modification de la durée,2000-02-17,1,['21.100.20'],ISO/TC 4/SC 8,9599,,[38102],"['en','fr']",6,

7803,IS,,ISO 2810:1974,Paints and varnishes — Notes for guidance on the conduct of natural weathering tests,Peintures et vernis — Notes indicatives sur la conduite des essais de vieillissement naturel,1974-08-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[34725],"['en','fr']",7,<p>Specifies the factors which need to be taken into consideration in the selection of methods for the exposure to natural weathering of paint films or systems for the purpose of evaluating their durability. A method is specified which is recommended for the use where no specialized requirements apply. Supplementary information shall be derived from the national standard or shall be the subject of agreement between the interes

34725,IS,,ISO 2810:2004,Paints and varnishes — Natural weathering of coatings — Exposure and assessment,Peintures et vernis — Vieillissement naturel des revêtements — Exposition et évaluation,2004-07-02,2,['87.040'],ISO/TC 35/SC 9,9599,[7803],[76042],"['en','fr','ru']",11,"<p>ISO 2810:2004 specifies the conditions which need to be taken into consideration in the selection of the type of natural weathering and the natural weathering procedure to be used to determine the resistance of coatings or coating systems (direct weathering or weathering behind window glass).</p><p>Natural weathering is used to determine the resistance of coatings or coating systems (denoted in the following text simply

2455,IS,,ISO 2811-1:1997,Paints and varnishes — Determination of density — Part 1: Pyknometer method,Peintures et vernis — Détermination de la masse volumique — Partie 1: Méthode pycnométrique,1997-12-18,1,['87.040'],ISO/TC 35/SC 9,9599,"[16485,7804]",[50493],"['en','fr']",9,

50493,IS,,ISO 2811-1:2011,Paints and varnishes — Determination of density — Part 1: Pyknometer method,Peintures et vernis — Détermination de la masse volumique — Partie 1: Méthode pycnométrique,2011-02-16,2,['87.040'],ISO/TC 35/SC 9,9599,[2455],[66946],"['en','fr','ru']",10,"<p>ISO 2811-1:2011 specifies a method for determining the density of paints, varnishes and related products using a metal or Gay-Lussac pyknometer.</p><p>The method is limited to materials of low or medium viscosity at the temperature of test. The Hubbard pyknometer can be used for highly viscous materials.</p>"

66946,IS,,ISO 2811-1:2016,Paints and varnishes — Determination of density — Part 1: Pycnometer method,Peintures et vernis — Détermination de la masse volumique — Partie 1: Méthode pycnométrique,2016-02-17,3,['87.040'],ISO/TC 35/SC 9,9599,[50493],[83323],"['en','fr']",10,"<p>ISO 2811-1:2016 specifies a method for determining the density of paints, varnishes and related products using a metal or Gay-Lussac pycnometer.</p><p>The method is limited to materials of low or medium viscosity at the temperature of test. The Hubbard pycnometer (see ISO 3507) can be used for highly viscous materials.</p>"

7804,IS,,ISO 2811:1974,Paints and varnishes — Determination of density,Peintures et vernis — Détermination de la masse volumique,1974-04-01,1,['87.040'],ISO/TC 35/SC 9,9599,,"[2455,25477,25478,25479]","['en','fr']",3,

25477,IS,,ISO 2811-2:1997,Paints and varnishes — Determination of density — Part 2: Immersed body (plummet) method,Peintures et vernis — Détermination de la masse volumique — Partie 2: Méthode par immersion d'un corps (plongeur),1997-12-18,1,['87.040'],ISO/TC 35/SC 9,9599,[7804],[50494],"['en','fr']",7,

25478,IS,,ISO 2811-3:1997,Paints and varnishes — Determination of density — Part 3: Oscillation method,Peintures et vernis — Détermination de la masse volumique — Partie 3: Méthode par oscillation,1997-12-18,1,['87.040'],ISO/TC 35/SC 9,9599,"[16485,7804]",[50495],"['en','fr']",8,

50495,IS,,ISO 2811-3:2011,Paints and varnishes — Determination of density — Part 3: Oscillation method,Peintures et vernis — Détermination de la masse volumique — Partie 3: Méthode par oscillation,2011-02-16,2,['87.040'],ISO/TC 35/SC 9,9599,[25478],[85303],"['en','fr','ru']",8,"<p>ISO 2811-3:2011 specifies a method for determining the density of paints, varnishes and related products using an oscillator.</p><p>The method is suitable for all materials, including paste-like coatings. If a pressure-resistant type of apparatus is used, the method is also applicable to aerosols.</p>"

25479,IS,,ISO 2811-4:1997,Paints and varnishes — Determination of density — Part 4: Pressure cup method,Peintures et vernis — Détermination de la masse volumique — Partie 4: Méthode du cylindre sous pression,1997-12-18,1,['87.040'],ISO/TC 35/SC 9,9599,[7804],[50496],"['en','fr']",8,

7808,IS,,ISO 2812-1:1993,Paints and varnishes — Determination of resistance to liquids — Part 1: General methods,Peintures et vernis — Détermination de la résistance aux liquides — Partie 1: Méthodes générales,1993-02-18,1,['87.040'],ISO/TC 35/SC 9,9599,[7806],[37482],"['en','fr']",5,"<p>The principle is exposing a coated test panel to a liquid by one of three specified methods (the immersion method using a single-phase liquid or a two-phase liquid, a method with the use of an absorbent medium, and the spotting method) and evaluating the effects of exposure by criteria agreed in advance between the interested parties, these criteria usually being of a subjective nature. Method 1 is intended

37482,IS,,ISO 2812-1:2007,Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water,Peintures et vernis — Détermination de la résistance aux liquides — Partie 1: Immersion dans des liquides autres que l'eau,2007-01-10,2,['87.040'],ISO/TC 35/SC 9,9599,[7808],[71584],"['en','fr','ru']",7,"<p>ISO 2812-1:2007 specifies general methods for determining the resistance of an individual-layer or multi-layer system of coating materials to the effects of liquids, other than water, or paste-like products (included implicitly in test liquids mentioned in the text).</p><p>These methods enable the testers to determine the effects of the test liquid on the

7806,IS,,ISO 2812:1974,Paints and varnishes — Determination of resistance to liquids,Peintures et vernis — Détermination de la résistance aux liquides,1974-02-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[7808],"['en','fr']",3,

7807,IS,,ISO 2812-2:1993,Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method,Peintures et vernis — Détermination de la résistance aux liquides — Partie 2: Méthode par immersion dans l'eau,1993-02-18,1,['87.040'],ISO/TC 35/SC 9,9599,[6115],[39405],"['en','fr']",4,"<p>The principle of the method is immersing a coated test panel in water and evaluating the effects of immersion by criteria agreed in advance between the interested parties, these criteria usually being of a subjective nature. The method gives an indication of the results likely to be obtained when painted articles are stored under conditions where prolonged condensation but not an extreme

39405,IS,,ISO 2812-2:2007,Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method,Peintures et vernis — Détermination de la résistance aux liquides — Partie 2: Méthode par immersion dans l'eau,2007-01-10,2,['87.040'],ISO/TC 35/SC 9,9599,[7807],[71585],"['en','fr','ru']",4,"<p>ISO 2812-2:2007 specifies a method for determining the resistance of an individual-layer or multi-layer system of coating materials to the effects of water by partial or full immersion.</p><p>This method enables the determination of the effects of water on the coating and, if necessary, the assessment of the damage to the substrate.</p>"

37483,IS,,ISO 2812-3:2007,Paints and varnishes — Determination of resistance to liquids — Part 3: Method using an absorbent medium,Peintures et vernis — Détermination de la résistance aux liquides — Partie 3: Méthode utilisant un milieu absorbant,2007-01-10,1,['87.040'],ISO/TC 35/SC 9,9599,,[56811],"['en','fr','ru']",7,"<p>ISO 2812-3:2007 specifies a method, using an absorbant medium, for determining the resistance of an individual-layer or multi-layer system of coating materials to the effects of liquids or paste-like products.</p><p>This method enables the testers to determine the effects of the test substance on the coating and, if necessary, to assess the damage to the substrate.</p>" 37

56811,IS,,ISO 2812-3:2012,Paints and varnishes — Determination of resistance to liquids — Part 3: Method using an absorbent medium,Peintures et vernis — Détermination de la résistance aux liquides — Partie 3: Méthode utilisant un milieu absorbant,2012-07-02,2,['87.040'],ISO/TC 35/SC 9,9599,[37483],[76043],"['en','fr']",7,

37484,IS,,ISO 2812-4:2007,Paints and varnishes — Determination of resistance to liquids — Part 4: Spotting methods,Peintures et vernis — Détermination de la résistance aux liquides — Partie 4: Méthodes à la tache,2007-01-10,1,['87.040'],ISO/TC 35/SC 9,9599,,[71586],"['en','fr','ru']",7,"<p>ISO 2812-4:2007 specifies spotting methods for determining the resistance of an individual layer or multi-layer system of coating materials to the effects of liquids or paste-like products.</p><p>These methods enable the testers to determine the effects of the test substance on the coating and, if necessary, to assess the damage to the substrate.</p>"

37485,IS,,ISO 2812-5:2007,Paints and varnishes — Determination of resistance to liquids — Part 5: Temperature-gradient oven method,Peintures et vernis — Détermination de la résistance aux liquides — Partie 5: Méthode au four à gradient de température,2007-01-10,1,['87.040'],ISO/TC 35/SC 9,9599,,[71587],"['en','fr','ru']",6,"<p>ISO 2812-5:2007 specifies a method, using a temperature-gradient oven, for determining the resistance of an individual-layer or multi-layer system of coating materials to the effects of liquids or paste-like products.</p><p>This method enables the testers to determine the effects of the test substance on the coating and, if necessary, to assess the damage to the substr

7809,IS,,ISO 2813:1978,"Paints and varnishes — Measurement of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees","Peintures et vernis — Mesurage de la réflexion spéculaire de feuils de peinture non métallisés à 20 degrés, 60 degrés et 85 degrés",1978-06-01,2,['87.040'],ISO/TC 35/SC 9,9599,,[7810],"['en','fr']",7,

7810,IS,,ISO 2813:1994,"Paints and varnishes — Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees","Peintures et vernis — Détermination de la réflexion spéculaire de feuils de peinture non métallisée à 20 degrés, 60 degrés et 85 degrés",1994-07-28,3,['87.040'],ISO/TC 35/SC 9,9599,[7809],[56807],"['en','fr']",8,"<p>Specifies a test method for determining the specular gloss of paint films using a reflectometer geometry of 20°, 60° or 85°. The 60° geometry is applicable to all paint films, but for very high gloss and near-matt films 20° or 85° may be more suitable. The 20° geometry is intended to give improved differentiation between high-gloss