Withdrawn and superseded ISO standards — page 9 of 246

18520,IS,,ISO 10457:1991,Textile machinery — Dyeing and finishing machines — Nominal speeds,Matériel pour l'industrie textile — Machines de teinture et d'apprêt — Vitesses nominales,1991-10-17,1,['59.120.50'],ISO/TC 72/SC 4,9599,,[35409],"['en','fr']",1,"<p>Specifies the following nominal speeds in order to simplify the choice of the drive units and to facilitate the combination of individual machines in a production plant. Speeds in metres per minute: 5, 10, 20, 30, 40, 50, 60, 80, 100, 125, 150, 200, 250.</p>"

5530,IS,,ISO 1046:1973,Architectural and building drawings — Vocabulary,Dessins de bâtiment et d'architecture — Vocabulaire,1973-11-01,3,"['01.100.30','01.040.01']",ISO/TC 10,9599,[5529],[18241],"['en','fr']",2,

18523,IS,,ISO 10460:1993,Welded carbon steel gas cylinders — Periodic inspection and testing,Bouteilles à gaz soudées en acier au carbone — Contrôles et essais périodiques,1993-06-10,1,['23.020.35'],ISO/TC 58/SC 4,9599,,[33358],"['en','fr']",24,"<p>Specifies the minimum requirements to verify the integrity of the gas cylinders for further service. Does not exclude the application of additional national requirements. Deals with gas cylinders intended for compressed, liquefied or dissolved gases under pressure, excluding acetylene and LPG, of water capacity from 1 l up to 150 l; also applies, as far as practicable, to cylinders of less than 1 l water capacity.</p>"

33358,IS,,ISO 10460:2005,Gas cylinders — Welded carbon-steel gas cylinders — Periodic inspection and testing,Bouteilles à gaz — Bouteilles à gaz soudées en acier au carbone — Contrôles et essais périodiques,2005-03-07,2,['23.020.35'],ISO/TC 58/SC 4,9599,[18523],[68494],['en'],21,"<p>ISO 10460:2004 deals with welded, carbon steel transportable gas cylinders intended for compressed and liquefied gases under pressure of water capacity from 0,5 l to 150 l; it also applies, as far as practical to cylinders of less than 0,5 l water capacity and greater than 150 l up to 450 l.</p><p>ISO 10460:2004 specifies the requirements for periodic inspection and testing to verify the integrity of such gas cyl

18524,IS,,ISO 10461:1993,Seamless aluminium-alloy gas cylinders — Periodic inspection and testing,Bouteilles à gaz sans soudure en alliage d'aluminium — Contrôles et essais périodiques,1993-06-10,1,['23.020.35'],ISO/TC 58/SC 4,9599,,[33359],"['en','fr']",25,"<p>Specifies the minimum requirements to verify the integrity of the gas cylinders for further service. Does not exclude the application of additional national requirements. Deals with gas cylinders intended for compressed, liquefied or dissolved gases under pressure, excluding acetylene, of water capacity from 0,5 l up to 150 l; also applies, as far as practicable, to cylinders of less than 0,5 l water capacity.</p>"

33359,IS,,ISO 10461:2005,Gas cylinders — Seamless aluminium-alloy gas cylinders — Periodic inspection and testing,Bouteilles à gaz — Bouteilles à gaz sans soudure en alliage d'aluminium — Contrôles et essais périodiques,2005-03-07,2,['23.020.35'],ISO/TC 58/SC 4,9599,[18524],[61505],['en'],39,"<p>ISO 10461:2005 deals with seamless aluminium-alloy transportable gas cylinders intended for compressed and liquefied gases under pressure, of water capacity from 0,5 l to 150 l; it also applies, as far as practical, to cylinders of less than 0,5 l water capacity.</p><p>ISO 10461:2005 specifies the requirements for periodic inspection and testing to verify the integrity of such gas cylinders for furth

44228,IS,Amd,ISO 10461:2005/Amd 1:2006,Gas cylinders — Seamless aluminium-alloy gas cylinders — Periodic inspection and testing — Amendment 1,Bouteilles à gaz — Bouteilles à gaz sans soudure en alliage d'aluminium — Contrôles et essais périodiques — Amendement 1,2006-07-13,2,['23.020.35'],ISO/TC 58/SC 4,9599,,[61505],['en'],1,

18525,IS,,ISO 10462:1994,Cylinders for dissolved acetylene — Periodic inspection and maintenance,Bouteilles à acétylène dissous — Contrôles et essais périodiques,1994-12-22,1,['23.020.35'],ISO/TC 58/SC 4,9599,,[33360],"['en','fr']",19,"<p>Specifies the minimum requirements for periodic inspection and maintenance to verify the integrity of acetylene cylinders for further service, regardless of the method of manufacture of the shell. Does not exclude the application of additional national requirements. Does not exempt the filler of an acetylene cylinder from the obligation to carry out an external visual examination prior to each charging and to ensure that cylinders are suitable for refilling

33360,IS,,ISO 10462:2005,Gas cylinders — Transportable cylinders for dissolved acetylene — Periodic inspection and maintenance,Bouteilles à gaz — Bouteilles transportables pour acétylène dissous — Contrôles et entretien périodiques,2005-03-07,2,['23.020.35'],ISO/TC 58/SC 4,9599,[18525],[57736],['en'],22,"<p>ISO 10462:2005 specifies requirements for the periodic inspection of seamless and welded cylinders manufactured from steel or aluminium alloys intended for the transport of acetylene in cylinders of water capacity up to 150 l and requirements for the periodic inspection and maintenance of acetylene cylinders, regardless of the method of manufacture of the shell.</p>"

18526,IS,,ISO 10463:1993,Cylinders for permanent gases — Inspection at time of filling,Bouteilles pour gaz permanents — Contrôle au moment du remplissage,1993-06-10,1,['23.020.35'],ISO/TC 58/SC 4,9599,,[37208],"['en','fr']",3,"<p>Specifies minimum requirements for filling inspections of transportable gas cylinders. These requirements reflect current practice and experience. Applies to cylinders of water capacity from 0,5 l to 150 l.</p>"

18529,IS,,ISO 10466:1997,Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test method to prove the resistance to initial ring deflection,Systèmes de canalisations en plastiques — Tubes en plastiques thermodurcissables renforcés de verre (PRV) — Méthode d'essai pour établir la résistance à la déflexion annulaire initiale,1997-11-06,1,['23.040.20'],ISO/TC 138/SC 6,9599,,[79760],['en'],6,<p>This International Standard specifies a method for testing the ability of glass-reinforced thermosetting plastics (GRP) pipes to withstand specified levels of initial ring deflection without displaying surface damage and/or structural failure.</p>

33530,IS,,ISO 10467:2004,Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin,Systèmes de canalisation en matières plastiques pour les branchements et les collecteurs d'assainissement avec ou sans pression — Systèmes en plastiques thermodurcissables renforcés de verre (PRV) à base de résine de polyester non saturé (UP),2004-01-13,1,"['93.030','91.140.80','23.040.20']",ISO/TC 138/SC 6,9599,,"[65186,70198]",['en'],75,"<p>ISO 10467:2004 specifies the properties of piping system components made from glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester r

52273,IS,Amd,ISO 10467:2004/Amd 1:2012,Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Amendment 1,Systèmes de canalisation en matières plastiques pour les branchements et les collecteurs d'assainissement avec ou sans pression — Systèmes en plastiques thermodurcissables renforcés de verre (PRV) à base de résine de polyester non saturé (UP) — Amendement 1,2012-03-02,1,"['93.030','91.140.80','23.040.20']",ISO/TC 138/SC 6,9599,,"[65186,70198]",['en'],5,

70198,IS,,ISO 10467:2018,Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin,Systèmes de canalisation en matières plastiques pour les branchements et les collecteurs d'assainissement avec ou sans pression — Systèmes en plastiques thermodurcissables renforcés de verre (PRV) à base de résine de polyester non saturé (UP),2018-05-17,2,"['93.030','91.140.80','23.040.20']",ISO/TC 138/SC 6,9599,"[33530,52273]",[77173],['en'],59,"<p>This document specifies the properties of piping system components made from glass-reinforced thermosetting plastics (GRP) based on unsaturated polye

32230,IS,,ISO 10468:2003,Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor,Tubes en plastiques thermodurcissables renforcés de verre (PRV) — Détermination de la rigidité annulaire spécifique à long terme en fluage en conditions mouillées et calcul du facteur de fluage mouillé,2003-11-21,1,['23.040.20'],ISO/TC 138/SC 6,9599,,[71166],['en'],10,<p>ISO 10468:2003 specifies a method for determining both the long-term specific ring creep stiffness and the wet creep factor for glass-reinforced thermosetting plastics (GRP) pipes.</p>

55953,IS,Amd,ISO 10468:2003/Amd 1:2010,Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor — Amendment 1,Tubes en plastiques thermodurcissables renforcés de verre (PRV) — Détermination de la rigidité annulaire spécifique à long terme en fluage en conditions mouillées et calcul du facteur de fluage mouillé — Amendement 1,2010-08-19,1,['23.040.20'],ISO/TC 138/SC 6,9599,,[71166],['en'],1,

71166,IS,,ISO 10468:2018,Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions,Tubes en plastiques thermodurcissables renforcés de verre (PRV) — Détermination des propriétés de fluage annulaires en conditions humides ou sèches,2018-05-03,2,['23.040.20'],ISO/TC 138/SC 6,9599,"[55953,32230]",[84120],['en'],9,<p>This document specifies methods for determining the ring creep properties for glass-reinforced thermosetting plastics (GRP) pipes. Properties include the creep factor and the long-term specific creep stiffness. Testing is performed under either wet (total immersion in water) or dry conditions.</p><p>Dry creep testing

18532,IS,,ISO 10469:1994,Copper sulfide concentrates — Determination of copper content — Electrogravimetric method,Concentrés de sulfure de cuivre — Dosage du cuivre — Méthode électrogravimétrique,1994-06-16,1,['73.060.99'],ISO/TC 183,9599,,[39286],"['en','fr']",20,"<p>The principle of the method specified is decomposing a test portion in nitric and sulfuric acids, separating copper from interfering elements (silver, arsenic, antimony, selenium, tin, iron, bismuth, and tellurium), determining traces of copper in the electrolyte, the filtrate, all precipitates and residues by flame atomic absorption spectrometry (FAAS), dissolving and analysing copper deposits for coprecipitated elements, mai

18533,IS,,ISO 10470:1993,Green coffee — Defect reference chart,Café vert — Table de référence des défauts,1993-06-10,1,['67.140.20'],ISO/TC 34/SC 15,9599,,"[30992,40401]","['en','fr']",22,"<p>Gives a listing in chart form of the main types of defect. Each of the following main types of commercial green coffee is considered separately: wet-processed Arabica, dry-processed Arabica, dry-processed Robusta. The chart gives definitions and characteristics of each defect, together with its likely cause, and its effect on roasting and on brew flavour of the roasted bean. A qualitative assessment of the effects of the defects on appearance and flavour is also given in terms of their generally accepte

32234,IS,,ISO 10471:2003,Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions,Tubes en plastiques thermodurcissables renforcés de verre (PRV) — Détermination de l'effort à la flexion ultime à long terme et réflexion annulaire relative ultime à long terme dans des conditions mouillées,2003-11-21,1,['23.040.20'],ISO/TC 138/SC 6,9599,,[70029],['en'],10,"<p>ISO 10471:2003 specifies a method for determining by extrapolation the long-term ultimate bending strain and the calculation of the long-term ultimate relative ring deflection of glass-reinforced thermosetting plast

56652,IS,Amd,ISO 10471:2003/Amd 1:2010,Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions — Amendment 1,Tubes en plastiques thermodurcissables renforcés de verre (PRV) — Détermination de l'effort à la flexion ultime à long terme et réflexion annulaire relative ultime à long terme dans des conditions mouillées — Amendement 1,2010-08-19,1,['23.040.20'],ISO/TC 138/SC 6,9599,,[70029],['en'],1,

70029,IS,,ISO 10471:2018,Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions,Tubes en plastiques thermodurcissables renforcés de verre (PRV) — Détermination de l'effort à la flexion ultime à long terme et réflexion annulaire relative ultime à long terme dans des conditions mouillées,2018-05-17,2,['23.040.20'],ISO/TC 138/SC 6,9599,"[56652,32234]",[88073],['en'],10,"<p>This document specifies a method for determining by extrapolation the long-term ultimate ring bending strain and the calculation of the long-term ultimate relative ring deflection of glass-reinforced

18541,IS,,ISO 10474:1991,Steel and steel products — Inspection documents,Aciers et produits sidérurgiques — Documents de contrôle,1991-12-05,1,['77.140.01'],ISO/TC 17/SC 20,9599,,[53736],"['en','fr']",6,<p>Defines the different types of inspection documents supplied to the purchaser. Shall be used in conjunction with: ISO 404 for steel and steel products; ISO 4990 for steel castings.</p>

18542,IS,,ISO 10475:1992,Valves for tubeless tyres and valves for tubes — Identification system for valves and their components,Valves pour pneumatiques sans chambre et valves pour chambres à air — Système d'identification des valves et de leurs composants,1992-10-21,1,['83.160.01'],ISO/TC 31/SC 9,9599,,[17113],"['en','fr']",4,"<p>Valves are identified by a four-character code (two letters plus two digits), valve components by a three-character code (one letter plus two digits).</p>"

18544,IS,,ISO 10477:1992,Dentistry — Polymer-based crown and bridge materials,Art dentaire — Produits à base de polymère pour couronnes et ponts,1992-12-03,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[33709],"['en','fr']",8,<p>Covers the materials for laboratory-fabricated permanent facings or anterior crowns which may or may not be attached to a metal substructure. Classifies the materials and specifies the requirements and associated test methods.</p>

22725,IS,Amd,ISO 10477:1992/Amd 1:1998,Dentistry — Polymer-based crown and bridge materials — Amendment 1,Art dentaire — Produits à base de polymère pour couronnes et ponts — Amendement 1,1998-04-16,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[33709],"['en','fr']",4,

33709,IS,,ISO 10477:2004,Dentistry — Polymer-based crown and bridge materials,Art dentaire — Produits à base de polymères pour couronnes et ponts,2004-09-22,2,['11.060.10'],ISO/TC 106/SC 2,9599,"[18544,22725]",[68235],"['en','fr']",21,"<p>ISO 10477:2004 classifies polymer-based dental crown and bridge materials and specifies their requirements. It also specifies the test methods to be used to determine compliance with these requirements. </p><p>ISO 10477:2004 is applicable to polymer-based dental crown and bridge materials for laboratory-fabricated permanent facings or anterior crowns that may or may not be attached to a metal substructure. It also applies to polymer-based dental crown and b

68235,IS,,ISO 10477:2018,Dentistry — Polymer-based crown and veneering materials,Médecine bucco-dentaire — Produits à base de polymères pour couronnes et facettes,2018-06-08,3,['11.060.10'],ISO/TC 106/SC 2,9599,[33709],"[79671,80007,78520]","['en','fr']",19,<p>This document classifies polymer-based crown and veneering materials used in dentistry and specifies their requirements. It also specifies the test methods to be used to determine conformity to these requirements.</p><p>This document is applicable to polymer-based crown and veneering materials for laboratory-fabricated permanent veneers or crowns. It also applies to polymer-based dental crown and veneering materials for which the manuf

5532,IS,,ISO 1048:1973,Photography — Exposed colour roll film — Identification,"Photographie — Pellicules en couleurs, sur bobines, exposées — Identification",1973-10-01,1,['37.040.20'],ISO/TC 42,9599,,[5533],"['en','fr']",2,

5533,IS,,ISO 1048:1991,Photography — Exposed roll films — Identification,"Photographie — Pellicules en bobines, exposées — Identification",1991-11-28,2,['37.040.20'],ISO/TC 42,9599,[5532],[29302],"['en','fr']",3,

18551,IS,,ISO 10483-1:1993,Road vehicles — Intelligent power switches — Part 1: High-side intelligent power switch,Véhicules routiers — Sectionneurs de puissance intelligents — Partie 1: Sectionneur de puissance intelligent en version d'amont,1993-12-23,1,['43.040.10'],ISO/TC 22,9599,,[36423],"['en','fr']",16,"<p>Specifies the minimum requirements (functioning, electrical characteristics, variation of on resistance versus power supply voltage, packaging, test methods) for 12 V and 24 V body system high-side intelligent power switches intended primarily for automotive applications (e.g., lamps, motors, relays, etc.).</p>"

18553,IS,,ISO 10484:1997,Widening test on nuts,Essai d'évasement des écrous,1997-10-23,1,['21.060.20'],ISO/TC 2/SC 12,9599,,"[73208,66016]","['en','fr']",3,

18554,IS,,ISO 10485:1991,Cone proof load test on nuts,Essai de charge d'épreuve au cône des écrous,1991-11-28,1,['21.060.20'],ISO/TC 2/SC 12,9599,,[63204],"['en','fr']",2,<p>Specifies under the conditions of the load test the properties of nuts with: nominal thread diameter from 5 mm up to 39 mm; product grades A and B; property classes 8 to 12.</p>

18563,IS,,ISO 10494:1993,Gas turbines and gas turbine sets — Measurement of emitted airborne noise — Engineering/survey method,Turbines à gaz et groupes de turbines à gaz — Mesurage du bruit aérien émis — Méthode d'expertise/de contrôle,1993-07-01,1,"['17.140.20','27.040']",ISO/TC 192,9599,,"[12449,64946]","['en','fr']",23,"<p>Specifies methods for measuring the sound pressure levels on a measurement surface enveloping a source, and for calculating the sound power level produced by the source. Gives requirements for the test environment and instrumentation, as well as techniques for obtaining the surface sound pressure level from which the A-weighted sound power level of the source and octav

18566,IS,,ISO 10497:1992,Testing of valves — Fire type-testing requirements,Essais des appareils de robinetterie — Caractéristiques de l'essai au feu,1992-10-08,1,['23.060.01'],ISO/TC 153,9599,,"[25295,33203]","['en','fr']",12,<p>Describes test conditions and a fire type-test method for confirming the pressure-containing capability of a valve under pressure during and after the fire test and specifies performance requirements.</p>

33203,IS,,ISO 10497:2004,Testing of valves — Fire type-testing requirements,Essais des appareils de robinetterie — Exigences de l'essai au feu,2004-08-16,2,['23.060.01'],ISO/TC 153,9599,[18566],[45603],"['en','fr']",16,"<p>ISO 10497:2004 specifies fire type-testing requirements and a fire type-test method for confirming the pressure-containing capability of a valve under pressure during and after the fire test. It does not cover the testing requirements for valve actuators other than manually operated gear boxes or similar mechanisms when these form part of the normal valve assembly. Other types of valve actuators (e.g. electrical, pneumatic or hydraulic) may need special protection to opera

45603,IS,,ISO 10497:2010,Testing of valves — Fire type-testing requirements,Essais des appareils de robinetterie — Exigences de l'essai au feu,2010-02-12,3,['23.060.01'],ISO/TC 153,9599,[33203],[78853],"['en','fr']",16,"<p>ISO 10497:2010 specifies fire type-testing requirements and a fire type-test method for confirming the pressure-containing capability of a valve under pressure during and after the fire test. It is not applicable to the testing requirements for valve actuators other than manually operated gear boxes or similar mechanisms when these form part of the normal valve assembly. Other types of valve actuators (e.g. electrical, pneumatic or hydraulic) can need special protection to

18568,IS,,ISO 10499-1:1991,"Industrial tyres and rims — Rubber solid tyres (metric series) for pneumatic tyre rims — Part 1: Designation, dimensions and marking","Pneumatiques et jantes pour matériel de manutention — Bandages pleins (série millimétrique) pour jantes de pneumatiques — Partie 1: Désignation, cotes et marquage",1991-09-26,1,['83.160.99'],ISO/TC 31/SC 7,9599,,[73653],"['en','fr']",3,

29922,IS,Cor,ISO 10499-1:1991/Cor 1:1997,"Industrial tyres and rims — Rubber solid tyres (metric series) for pneumatic tyre rims — Part 1: Designation, dimensions and marking — Technical Corrigendum 1","Pneumatiques et jantes pour matériel de manutention — Bandages pleins (série millimétrique) pour jantes de pneumatiques — Partie 1: Désignation, cotes et marquage — Rectificatif technique 1",1997-12-18,1,['83.160.99'],ISO/TC 31/SC 7,9599,,[73653],"['en','fr']",2,

3781,IS,,ISO 105-A:1984,Textiles — Tests for colour fastness — Part A: General principles,Textiles — Essais de solidité des teintures — Partie A: Principes généraux,1984-11-01,2,['59.080.01'],ISO/TC 38/SC 1,9599,[3774],"[3786,3783,3784]","['en','fr']",9,

3782,IS,,ISO 105-A01:1987,Textiles — Tests for colour fastness — Part A01: General principles of testing,Textiles — Essais de solidité des teintures — Partie A01: Principes généraux pour effectuer les essais,1987-12-10,3,['59.080.01'],ISO/TC 38/SC 1,9599,,[3783],"['en','fr']",,

3783,IS,,ISO 105-A01:1989,Textiles — Tests for colour fastness — Part A01: General principles of testing,Textiles — Essais de solidité des teintures — Partie A01: Principes généraux pour effectuer les essais,1989-12-07,4,['59.080.01'],ISO/TC 38/SC 1,9599,"[3781,3782]",[21985],"['en','fr']",5,

21985,IS,,ISO 105-A01:1994,Textiles — Tests for colour fastness — Part A01: General principles of testing,Textiles — Essais de solidité des teintures — Partie A01: Principes généraux pour effectuer les essais,1994-08-04,5,['59.080.01'],ISO/TC 38/SC 1,9599,[3783],[45028],"['en','fr']",7,<p>Cancels and replaces the fourth edition (1990) and amendment 1 (1993). Provides general information about the methods for testing colour fastness of textiles for the guidance of users. Procedures common to a number of the methods are discussed briefly. The methods may also be used for assessing colour fastness of dyes. The conditions in the tests have been chosen to correspond closely to treatments usually

3784,IS,,ISO 105-A02:1987,Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour,Textiles — Essais de solidité des teintures — Partie A02: Échelle de gris pour l'évaluation des dégradations,1987-12-03,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3781],[3785],"['en','fr']",2,

3786,IS,,ISO 105-A03:1987,Textiles — Tests for colour fastness — Part A03: Grey scale for assessing staining,Textiles — Essais de solidité des teintures — Partie A03: Échelle de gris pour l'évaluation des dégorgements,1987-12-03,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3781],[3787],"['en','fr']",2,

3787,IS,,ISO 105-A03:1993,Textiles — Tests for colour fastness — Part A03: Grey scale for assessing staining,Textiles — Essais de solidité des teintures — Partie A03: Échelle de gris pour l'évaluation des dégorgements,1993-08-26,4,['59.080.01'],ISO/TC 38/SC 1,9599,[3786],[75985],"['en','fr']",2,"<p>Describes the grey scale for determining staining of adjacent fabrics in colour fastness tests, and its use. A precise colorimetric specification of the scale is given as a permanent record against which newly prepared working standards and standards that may have changed can be compared. The essential scale (5 steps) consists of pairs of non-glossy grey or white colour chips (or swatches of grey

27966,IS,Cor,ISO 105-A03:1993/Cor 1:1997,Textiles — Tests for colour fastness — Part A03: Grey scale for assessing staining — Technical Corrigendum 1: (Applies to French version only),Textiles — Essais de solidité des teintures — Partie A03: Échelle de gris pour l'évaluation des dégorgements — Rectificatif technique 1,1997-02-13,4,['59.080.01'],ISO/TC 38/SC 1,9599,,[75985],['fr'],,

42127,IS,Cor,ISO 105-A03:1993/Cor 2:2005,Textiles — Tests for colour fastness — Part A03: Grey scale for assessing staining — Technical Corrigendum 2,Textiles — Essais de solidité des teintures — Partie A03: Échelle de gris pour l'évaluation des dégorgements — Rectificatif technique 2,2005-10-04,4,['59.080.01'],ISO/TC 38/SC 1,9599,,[75985],"['en','fr']",1,

3791,IS,,ISO 105-B:1984,Textiles — Tests for colour fastness — Part B: Colour fastness to light and weathering,Textiles — Essais de solidité des teintures — Partie B: Solidité des teintures à la lumière et aux intempéries,1984-09-01,2,['59.080.01'],ISO/TC 38/SC 1,9599,,"[3795,3796,3793,3797,3794]","['en','fr']",23,

3792,IS,,ISO 105-B01:1988,Textiles — Tests for colour fastness — Part B01: Colour fastness to light : Daylight,Textiles — Essais de solidité des teintures — Partie B01: Solidité des teintures à la lumière : Lumière du jour,1988-04-28,3,['59.080.01'],ISO/TC 38/SC 1,9599,,[3793],['fr'],,

3793,IS,,ISO 105-B01:1989,Textiles — Tests for colour fastness — Part B01: Colour fastness to light: Daylight,Textiles — Essais de solidité des teintures — Partie B01: Solidité des teintures à la lumière: Lumière du jour,1989-12-21,4,['59.080.01'],ISO/TC 38/SC 1,9599,"[3791,3792]",[20022],"['en','fr']",7,

20022,IS,,ISO 105-B01:1994,Textiles — Tests for colour fastness — Part B01: Colour fastness to light: Daylight,Textiles — Essais de solidité des teintures — Partie B01: Solidité des teintures à la lumière: Lumière du jour,1994-11-17,5,['59.080.01'],ISO/TC 38/SC 1,9599,[3793],[65210],"['en','fr']",9,<p>Cancels and replaces the fourth edition (1989). Specifies a method intended for determining the resistance of the colour of textiles of all kinds and in all forms to the action of daylight. This method allows the use of two different sets of blue wool references. The results from the two different sets of references may not be identical.</p>

26491,IS,Amd,ISO 105-B01:1994/Amd 1:1998,Textiles — Tests for colour fastness — Part B01: Colour fastness to light: Daylight — Amendment 1,Textiles — Essais de solidité des teintures — Partie B01: Solidité des teintures à la lumière: Lumière du jour — Amendement 1,1998-03-05,5,['59.080.01'],ISO/TC 38/SC 1,9599,,[65210],"['en','fr']",3,

3794,IS,,ISO 105-B02:1988,Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light : Xenon arc fading lamp test,Textiles — Essais de solidité des teintures — Partie B02: Solidité des teintures à la lumière artificielle : Lampe à arc au xénon,1988-04-28,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3791],[20023],"['en','fr']",11,

20023,IS,,ISO 105-B02:1994,Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test,Textiles — Essais de solidité des teintures — Partie B02: Solidité des teintures à la lumière artificielle: Lampe à arc au xénon,1994-09-15,4,['59.080.01'],ISO/TC 38/SC 1,9599,[3794],[41372],"['en','fr']",16,<p>Specifies a method intended for determining the resistance of the colour of textiles to the action of an artificial light source representative of natural daylight (D65). The method is also applicable to white/bleached or optically brightened textiles.</p>

26492,IS,Amd,ISO 105-B02:1994/Amd 1:1998,Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test — Amendment 1,Textiles — Essais de solidité des teintures — Partie B02: Solidité des teintures à la lumière artificielle: Lampe à arc au xénon — Amendement 1,1998-07-30,4,['59.080.01'],ISO/TC 38/SC 1,9599,,[41372],"['en','fr']",3,

32091,IS,Amd,ISO 105-B02:1994/Amd 2:2000,Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test — Amendment 2: .,Textiles — Essais de solidité des teintures — Partie B02: Solidité des teintures à la lumière artificielle: Lampe à arc au xénon — Amendement 2: .,2000-11-23,4,['59.080.01'],ISO/TC 38/SC 1,9599,,[41372],"['en','fr']",5,

41372,IS,,ISO 105-B02:2013,Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test,Textiles — Essais de solidité des teintures — Partie B02: Solidité des teintures à la lumière artificielle: Lampe à arc au xénon,2013-05-14,5,['59.080.01'],ISO/TC 38/SC 1,9599,"[20023,32091,26492]",[65209],"['en','fr']",35,<p>ISO 105-B02:2013 specifies a method intended for determining the effect on the colour of textiles of all kinds and in all forms to the action of an artificial light source representative of natural daylight (D65). The method is also applicable to white (bleached or optically brightened) textiles.</p><p>This method allows the use of

3795,IS,,ISO 105-B03:1988,Textiles — Tests for colour fastness — Part B03: Colour fastness to weathering: Outdoor exposure,Textiles — Essais de solidité des teintures — Partie B03: Solidité des teintures aux intempéries: Exposition en plein air,1988-04-28,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3791],[20024],"['en','fr']",5,

20024,IS,,ISO 105-B03:1994,Textiles — Tests for colour fastness — Part B03: Colour fastness to weathering: Outdoor exposure,Textiles — Essais de solidité des teintures — Partie B03: Solidité des teintures aux intempéries: Exposition en plein air,1994-11-17,4,['59.080.01'],ISO/TC 38/SC 1,9599,[3795],[73660],"['en','fr']",6,<p>Cancels and replaces the third edition (1988). Specifies a method intended for determining the resistance of the colour of textiles of all kinds except loose fibres to the action of weather as determined by outdoor exposure.</p>

3796,IS,,ISO 105-B04:1988,Textiles — Tests for colour fastness — Part B04: Colour fastness to weathering : Xenon arc,Textiles — Essais de solidité des teintures — Partie B04: Solidité des teintures aux intempéries : Lampe à arc au xénon,1988-04-28,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3791],[20025],"['en','fr']",5,

20025,IS,,ISO 105-B04:1994,Textiles — Tests for colour fastness — Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test,Textiles — Essais de solidité des teintures — Partie B04: Solidité des teintures aux intempéries artificielles: Lampe à arc au xénon,1994-11-17,4,['59.080.01'],ISO/TC 38/SC 1,9599,[3796],[80087],"['en','fr']",8,"<p>Cancels and replaces the third edition (1988). Specifies a method intended for determining the resistance of the colour of textiles of all kinds, except loose fibres, to the action of weather as determined by exposure to simulated weathering conditions in a cabinet equipped with a xenon arc lamp. Can be used to determine if a textile is w

3797,IS,,ISO 105-B05:1988,Textiles — Tests for colour fastness — Part B05: Detection and assessment of photochromism,Textiles — Essais de solidité des teintures — Partie B05: Détection et évaluation de la phototropie,1988-04-28,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3791],[22232],"['en','fr']",4,

3798,IS,,ISO 105-B06:1992,Textiles — Tests for colour fastness — Part B06: Colour fastness to artificial light at high temperatures: Xenon arc fading lamp test,Textiles — Essais de solidité des teintures — Partie B06: Solidité des teintures à la lumière artificielle à hautes températures: Lampe à arc au xénon,1992-10-29,1,['59.080.01'],ISO/TC 38/SC 1,9599,,[26493],"['en','fr']",11,

26493,IS,,ISO 105-B06:1998,Textiles — Tests for colour fastness — Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test,Textiles — Essais de solidité des teintures — Partie B06: Solidité et vieillissement des teintures à la lumière artificielle à hautes températures: Essai avec lampe à arc au xénon,1998-11-05,2,['59.080.01'],ISO/TC 38/SC 1,9599,[3798],[74871],"['en','fr']",15,"<p>This part of ISO 105 specifies a method for determining the colour fastness and ageing properties of all kinds and forms of dyed and printed textiles and/or other organic substrates under the action of an artificial light source representative of natural daylight (

33048,IS,Amd,ISO 105-B06:1998/Amd 1:2002,Textiles — Tests for colour fastness — Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test — Amendment 1,Textiles — Essais de solidité des teintures — Partie B06: Solidité et vieillissement des teintures à la lumière artificielle à hautes températures: Essai avec lampe à arc au xénon — Amendement 1,2002-09-19,2,['59.080.01'],ISO/TC 38/SC 1,9599,,[74871],"['en','fr']",4,

3799,IS,,ISO 105-C:1982,Textiles — Tests for colour fastness — Part C: Colour fastness to washing and laundering,Textiles — Essais de solidité des teintures — Partie C: Solidité des teintures au lavage,1982-09-01,2,,ISO/TC 38/SC 1,9599,,"[3801,3805,3809,3803,3810,3807]","['en','fr']",18,

3800,IS,,ISO 105-C01:1987,Textiles — Tests for colour fastness — Part C01: Colour fastness to washing: Test 1,Textiles — Essais de solidité des teintures — Partie C01: Solidité des teintures au lavage: Essai 1,1987-12-17,3,['59.080.01'],ISO/TC 38/SC 1,9599,,[3801],"['en','fr']",,

3801,IS,,ISO 105-C01:1989,Textiles — Tests for colour fastness — Part C01: Colour fastness to washing: Test 1,Textiles — Essais de solidité des teintures — Partie C01: Solidité des teintures au lavage: Essai 1,1989-12-21,4,['59.080.01'],ISO/TC 38/SC 1,9599,"[3799,3800]",[31775],"['en','fr']",3,"<p>This part of ISO 105 specifies Test No. 1 of a series of five washing tests. A specimen of the textile, in contact with one or two specified adjacent fabrics, is mechanically agitated under described conditions of time and temperature in a soap solution, then rinsed and dried. The change in colour of the specimen and the staining of the adjacent fabric(s) are assessed with the grey scales.</p>" 380

3802,IS,,ISO 105-C02:1987,Textiles — Tests for colour fastness — Part C02: Colour fastness to washing : Test 2,Textiles — Essais de solidité des teintures — Partie C02: Solidité des teintures au lavage : Essai 2,1987-12-17,3,['59.080.01'],ISO/TC 38/SC 1,9599,,[3803],"['en','fr']",,

3803,IS,,ISO 105-C02:1989,Textiles — Tests for colour fastness — Part C02: Colour fastness to washing: Test 2,Textiles — Essais de solidité des teintures — Partie C02: Solidité des teintures au lavage: Essai 2,1989-12-14,4,['59.080.01'],ISO/TC 38/SC 1,9599,"[3802,3799]",[31775],"['en','fr']",3,"<p>This part of ISO 105 specifies Test No. 2 of a series of five washing tests. A specimen of the textile, in contact with one or two specified adjacent fabrics, is mechanically agitated under described conditions of time and temperature in a soap solution, then rinsed and dried. The change in colour of the specimen an d the staining of the adjacent fabric(s) are assessed with the grey scales.</p>" 38

3804,IS,,ISO 105-C03:1987,Textiles — Tests for colour fastness — Part C03: Colour fastness to washing: Test 3,Textiles — Essais de solidité des teintures — Partie C03: Solidité des teintures au lavage: Essai 3,1987-12-17,3,['59.080.01'],ISO/TC 38/SC 1,9599,,[3805],"['en','fr']",,

3805,IS,,ISO 105-C03:1989,Textiles — Tests for colour fastness — Part C03: Colour fastness to washing: Test 3,Textiles — Essais de solidité des teintures — Partie C03: Solidité des teintures au lavage: Essai 3,1989-12-21,4,['59.080.01'],ISO/TC 38/SC 1,9599,"[3804,3799]",[31775],"['en','fr']",3,"<p>This part of ISO 105 establishes Test No. 3 of a series of five washing tests. A specimen of the textile, in contact with one or two specified adjacent fabrics, is mechanically agitated under outlined conditions of time and temperature in a soap solution, then rinsed and dried. The change in colour of the specimen and the staining of the adjacent fabric(s) are assessed with the grey scales.</p>" 38

3806,IS,,ISO 105-C04:1987,Textiles — Tests for colour fastness — Part C04: Colour fastness to washing : Test 4,Textiles — Essais de solidité des teintures — Partie C04: Solidité des teintures au lavage : Essai 4,1987-12-17,3,['59.080.01'],ISO/TC 38/SC 1,9599,,[3807],"['en','fr']",,

3807,IS,,ISO 105-C04:1989,Textiles — Tests for colour fastness — Part C04: Colour fastness to washing: Test 4,Textiles — Essais de solidité des teintures — Partie C04: Solidité des teintures au lavage: Essai 4,1989-12-21,4,['59.080.01'],ISO/TC 38/SC 1,9599,"[3806,3799]",[31775],"['en','fr']",3,"<p>This part of ISO 105 describes Test No. 4 of a series of five washing tests. A specimen of the textile, in contact with one or two specified adjacent fabrics, is mechanically agitated under defined conditions of time and temperature in a soap solution, then rinsed and dried. The change in colour of the specimen and the staining of the adjacent fabric(s) are assessed with the grey scales.</p>" 3808,

3808,IS,,ISO 105-C05:1987,Textiles — Tests for colour fastness — Part C05: Colour fastness to washing : Test 5,Textiles — Essais de solidité des teintures — Partie C05: Solidité des teintures au lavage : Essai 5,1987-12-17,3,['59.080.01'],ISO/TC 38/SC 1,9599,,[3809],"['en','fr']",,

3809,IS,,ISO 105-C05:1989,Textiles — Tests for colour fastness — Part C05: Colour fastness to washing: Test 5,Textiles — Essais de solidité des teintures — Partie C05: Solidité des teintures au lavage: Essai 5,1989-12-21,4,['59.080.01'],ISO/TC 38/SC 1,9599,"[3799,3808]",[31775],"['en','fr']",3,"<p>This part of ISO 105 describes Test No. 5 of a series of five washing tests. A specimen of the textile, in contact with one or two specified adjacent fabrics, is mechanically agitated under defined conditions of time and temperature in a soap solution, then rinsed and dried. The change in colour of the specimen and the staining of the adjacent fabric(s) are assessed with the grey scales.</p>" 3810,

3810,IS,,ISO 105-C06:1987,Textiles — Tests for colour fastness — Part C06: Colour fastness to domestic and commercial laundering,Textiles — Essais de solidité des teintures — Partie C06: Solidité des teintures aux lavages domestiques et industriels,1987-12-17,2,['59.080.01'],ISO/TC 38/SC 1,9599,[3799],[21983],"['en','fr']",4,

21983,IS,,ISO 105-C06:1994,Textiles — Tests for colour fastness — Part C06: Colour fastness to domestic and commercial laundering,Textiles — Essais de solidité des teintures — Partie C06: Solidité des teintures aux lavages domestiques et industriels,1994-08-11,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3810],[51276],"['en','fr']",5,<p>Cancels and replaces the second edition (included in ISO 105-C06:1987) and amendment 1 (1993). Specifies methods intended for determining the resistance of the colour of textiles of all kinds and in all forms to domestic or commercial laundering procedures. These methods do not reflect the effect of optical brighteness present in commercial washing products.</p> 2198

36373,IS,Cor,ISO 105-C06:1994/Cor 1:2002,Textiles — Tests for colour fastness — Part C06: Colour fastness to domestic and commercial laundering — Technical Corrigendum 1,Textiles — Essais de solidité des teintures — Partie C06: Solidité des teintures aux lavages domestiques et industriels — Rectificatif technique 1,2002-02-14,3,['59.080.01'],ISO/TC 38/SC 1,9599,,[51276],"['en','fr']",1,

37111,IS,Cor,ISO 105-C06:1994/Cor 2:2002,Textiles — Tests for colour fastness — Part C06: Colour fastness to domestic and commercial laundering — Technical Corrigendum 2,Textiles — Essais de solidité des teintures — Partie C06: Solidité des teintures aux lavages domestiques et industriels — Rectificatif technique 2,2002-06-06,3,['59.080.01'],ISO/TC 38/SC 1,9599,,[51276],"['en','fr']",1,

30482,IS,,ISO 105-C08:2001,Textiles — Tests for colour fastness — Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator,"Textiles — Essais de solidité des teintures — Partie C08: Solidité des teintures aux lavages domestiques et industriels, utilisant un détergent de référence sans phosphate comprenant un activateur de blanchiment à basse température",2001-09-13,1,['59.080.01'],ISO/TC 38/SC 1,9599,,[51574],"['en','fr']",7,

41613,IS,Amd,ISO 105-C08:2001/Amd 1:2006,Textiles — Tests for colour fastness — Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator — Amendment 1,"Textiles — Essais de solidité des teintures — Partie C08: Solidité des teintures aux lavages domestiques et industriels, utilisant un détergent de référence sans phosphate comprenant un activateur de blanchiment à basse température — Amendement 1",2006-05-24,1,['59.080.01'],ISO/TC 38/SC 1,9599,,[51574],"['en','fr']",1,

37177,IS,Cor,ISO 105-C08:2001/Cor 1:2002,Textiles — Tests for colour fastness — Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator — Technical Corrigendum 1,"Textiles — Essais de solidité des teintures — Partie C08: Solidité des teintures aux lavages domestiques et industriels, utilisant un détergent de référence sans phosphate comprenant un activateur de blanchiment à basse température — Rectificatif technique 1",2002-06-06,1,['59.080.01'],ISO/TC 38/SC 1,9599,,[51574],"['en','fr']",2,

37178,IS,Cor,ISO 105-C09:2001/Cor 1:2002,Textiles — Tests for colour fastness — Part C09: Colour fastness to domestic and commercial laundering — Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator — Technical Corrigendum 1,Textiles — Essais de solidité des teintures — Partie C09: Solidité des teintures aux lavages domestiques et industriels — Blanchiment par oxydation utilisant un détergent de référence sans phosphate comprenant un activateur de blanchiment à basse température — Rectificatif technique 1,2002-06-06,1,['59.080.01'],ISO/TC 38/SC 1,9599,,[90703],"['en','fr']",1,

37645,IS,,ISO 105-C12:2004,Textiles - Tests for colour fastness — Part C12: Colour fastness to industrial laundering,Textiles - Essais de solidité des teintures — Partie C12: Solidité des teintures au lavage industriel,2004-11-08,1,"['59.080.01','97.060']",ISO/TC 38/SC 1,9599,,[84808],"['en','fr']",7,<p>ISO 105-C12:2004 specifies methods for determining the resistance of the colour of textiles of all kinds exposed to all forms of industrial laundering procedures.</p>

45730,IS,Cor,ISO 105-C12:2004/Cor 1:2007,Textiles - Tests for colour fastness — Part C12: Colour fastness to industrial laundering — Technical Corrigendum 1,Textiles - Essais de solidité des teintures — Partie C12: Solidité des teintures au lavage industriel — Rectificatif technique 1,2007-03-16,1,"['59.080.01','97.060']",ISO/TC 38/SC 1,9599,,[84808],"['en','fr']",1,

3811,IS,,ISO 105-D:1982,Textiles — Tests for colour fastness — Part D: Colour fastness to dry cleaning,Textiles — Essais de solidité des teintures — Partie D: Solidité des couleurs au nettoyage à sec,1982-09-01,2,,ISO/TC 38/SC 1,9599,,"[3813,3812]","['en','fr']",4,

3812,IS,,ISO 105-D01:1987,Textiles — Tests for colour fastness — Part D01: Colour fastness to dry cleaning,Textiles — Essais de solidité des teintures — Partie D01: Solidité des teintures au nettoyage à sec,1987-12-17,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3811],[22233],"['en','fr']",2,

22233,IS,,ISO 105-D01:1993,Textiles — Tests for colour fastness — Part D01: Colour fastness to dry cleaning,Textiles — Essais de solidité des teintures — Partie D01: Solidité des teintures au nettoyage à sec,1993-10-21,4,['59.080.01'],ISO/TC 38/SC 1,9599,[3812],[44688],"['en','fr']",2,"<p>A specimen of the textile in contact with a cotton fabric bag together with non-corrodible steel discs is agitated in perchloroethylene, then squeezed or centrifuged, and dried in hot air. The change in colour of the specimen is assessed with the grey scale for assessing change in colour. Not suitable for the evaluation of the durability of textile finishes.</p>"

3813,IS,,ISO 105-D02:1987,Textiles — Tests for colour fastness — Part D02: Colour fastness to rubbing: Organic solvents,Textiles — Essais de solidité des teintures — Partie D02: Solidité des teintures au frottement: Solvants organiques,1987-12-17,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3811],[22234],"['en','fr']",2,

22234,IS,,ISO 105-D02:1993,Textiles — Tests for colour fastness — Part D02: Colour fastness to rubbing: Organic solvents,Textiles — Essais de solidité des teintures — Partie D02: Solidité des teintures au frottement: Solvants organiques,1993-10-21,4,['59.080.01'],ISO/TC 38/SC 1,9599,[3813],[65211],"['en','fr']",2,"<p>Specifies a method for determining the resistance of the colour of textiles, except loose fibres, to the localized 'spotting' carried out by hand. A specimen of the textile is rubbed with rubbing cotton cloth impregnated with solvent. The change in colour of the specimen and the staining of the rubbing cotton cloth are assessed with the grey scales.</p>"

3814,IS,,ISO 105-E:1978,Textiles — Tests for colour fastness — Part E: Colour fastness to aqueous agencies,Textiles — Essais de solidité des teintures — Partie E: Solidité des teintures aux agents aqueux,1978-12-01,1,,ISO/TC 38/SC 1,9599,,"[3819,3834,3820,3827,3829,3836,3830,3822,3837,3816,3838,3825,3832,3833]","['en','fr']",24,

3815,IS,,ISO 105-E01:1987,Textiles — Tests for colour fastness — Part E01: Colour fastness to water,Textiles — Essais de solidité des teintures — Partie E01: Solidité des teintures à l'eau,1987-12-17,2,['59.080.01'],ISO/TC 38/SC 1,9599,,[3816],"['en','fr']",,

3816,IS,,ISO 105-E01:1989,Textiles — Tests for colour fastness — Part E01: Colour fastness to water,Textiles — Essais de solidité des teintures — Partie E01: Solidité des teintures à l'eau,1989-12-07,3,['59.080.01'],ISO/TC 38/SC 1,9599,"[3814,3815]",[21986],"['en','fr']",2,

21986,IS,,ISO 105-E01:1994,Textiles — Tests for colour fastness — Part E01: Colour fastness to water,Textiles — Essais de solidité des teintures — Partie E01: Solidité des teintures à l'eau,1994-09-01,4,['59.080.01'],ISO/TC 38/SC 1,9599,[3816],[52230],"['en','fr']",3,"<p>A specimen of the textile in contact with one or two specified adjacent fabrics is immersed in water, drained and placed between two plates under a specified pressure in a test device. The specimen and the adjacent fabric(s) are dried. The change in colour of the specimen and the staining of the adjacent fabric(s) are assessed with the grey scales.</p>"

36371,IS,Cor,ISO 105-E01:1994/Cor 1:2002,Textiles — Tests for colour fastness — Part E01: Colour fastness to water — Technical Corrigendum 1,Textiles — Essais de solidité des teintures — Partie E01: Solidité des teintures à l'eau — Rectificatif technique 1,2002-02-14,4,['59.080.01'],ISO/TC 38/SC 1,9599,,[52230],"['en','fr']",1,

52230,IS,,ISO 105-E01:2010,Textiles — Tests for colour fastness — Part E01: Colour fastness to water,Textiles — Essais de solidité des coloris — Partie E01: Solidité des coloris à l'eau,2010-04-13,5,['59.080.01'],ISO/TC 38/SC 1,9599,"[21986,36371]",[57962],"['en','fr','ru']",5,<p>ISO 105-E01:2010 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to immersion in water.</p>

3818,IS,,ISO 105-E02:1987,Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water,Textiles — Essais de solidité des teintures — Partie E02: Solidité des teintures à l'eau de mer,1987-12-17,2,['59.080.01'],ISO/TC 38/SC 1,9599,,[3819],"['en','fr']",,

3819,IS,,ISO 105-E02:1989,Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water,Textiles — Essais de solidité des teintures — Partie E02: Solidité des teintures à l'eau de mer,1989-12-14,3,['59.080.01'],ISO/TC 38/SC 1,9599,"[3814,3818]",[21987],"['en','fr']",2,