Withdrawn and superseded ISO standards — page 10 of 246

21987,IS,,ISO 105-E02:1994,Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water,Textiles — Essais de solidité des teintures — Partie E02: Solidité des teintures à l'eau de mer,1994-09-01,4,['59.080.01'],ISO/TC 38/SC 1,9599,[3819],[52231],"['en','fr']",3,"<p>A specimen of the textile in contact with one or two specified adjacent fabrics is immersed in sodium chloride solution, drained and placed between two plates under a specified pressure in a test device. The specimen and the adjacent fabric(s) are dried. The change in colour of the specimen and the staining of the adjacent fabric(s) are assessed with the grey scales.</p>"

36370,IS,Cor,ISO 105-E02:1994/Cor 1:2002,Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water — Technical Corrigendum 1,Textiles — Essais de solidité des teintures — Partie E02: Solidité des teintures à l'eau de mer — Rectificatif technique 1,2002-02-14,4,['59.080.01'],ISO/TC 38/SC 1,9599,,[52231],"['en','fr']",1,

3820,IS,,ISO 105-E03:1987,Textiles — Tests for colour fastness — Part E03: Colour fastness to chlorinated water (swimming-bath water),Textiles — Essais de solidité des teintures — Partie E03: Solidité des teintures à l'eau chlorée (eau de piscine),1987-12-17,2,['59.080.01'],ISO/TC 38/SC 1,9599,[3814],[21980],"['en','fr']",2,

21980,IS,,ISO 105-E03:1994,Textiles — Tests for colour fastness — Part E03: Colour fastness to chlorinated water (swimming-pool water),Textiles — Essais de solidité des teintures — Partie E03: Solidité des teintures à l'eau chlorée (eau de piscine),1994-09-01,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3820],[52252],"['en','fr']",3,<p>This part of ISO 105 describes a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of active chlorine in defined concentrations. Three alternative test conditions are specified. A specimen of the textile is treated with a weak chlorine solution of a given concentration and dried. The change in colour of the spe

3821,IS,,ISO 105-E04:1987,Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration,Textiles — Essais de solidité des teintures — Partie E04: Solidité des teintures à la sueur,1987-12-17,2,['59.080.01'],ISO/TC 38/SC 1,9599,,[3822],"['en','fr']",,

3822,IS,,ISO 105-E04:1989,Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration,Textiles — Essais de solidité des teintures — Partie E04: Solidité des teintures à la sueur,1989-12-14,3,['59.080.01'],ISO/TC 38/SC 1,9599,"[3821,3814]",[21988],"['en','fr']",3,

21988,IS,,ISO 105-E04:1994,Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration,Textiles — Essais de solidité des teintures — Partie E04: Solidité des teintures à la sueur,1994-09-15,4,['59.080.01'],ISO/TC 38/SC 1,9599,[3822],[41374],"['en','fr']",3,"<p>Specimens of the textile in contact with adjacent fabrics are treated in two different solutions containing histidine, drained and placed between two plates under a specified pressure in a test device. The specimen and the adjacent fabrics are dried separately. The change in colour of each specimen and the staining of the adjacent fabrics are assessed with the grey scales.</p>"

36372,IS,Cor,ISO 105-E04:1994/Cor 1:2002,Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration — Technical Corrigendum 1,Textiles — Essais de solidité des teintures — Partie E04: Solidité des teintures à la sueur — Rectificatif technique 1,2002-02-14,4,['59.080.01'],ISO/TC 38/SC 1,9599,,[41374],"['en','fr']",1,

41374,IS,,ISO 105-E04:2008,Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration,Textiles — Essais de solidité des teintures — Partie E04: Solidité des teintures à la sueur,2008-09-10,5,['59.080.01'],ISO/TC 38/SC 1,9599,"[36372,21988]",[57973],"['en','fr']",4,<p>ISO 105-E04:2008 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of human perspiration.</p>

3824,IS,,ISO 105-E05:1987,Textiles — Tests for colour fastness — Part E05: Colour fastness to spotting : Acid,Textiles — Essais de solidité des teintures — Partie E05: Solidité des teintures aux acides,1987-12-17,2,['59.080.01'],ISO/TC 38/SC 1,9599,,[3825],"['en','fr']",,

3825,IS,,ISO 105-E05:1989,Textiles — Tests for colour fastness — Part E05: Colour fastness to spotting: Acid,Textiles — Essais de solidité des teintures — Partie E05: Solidité des teintures aux acides,1989-12-07,3,['59.080.01'],ISO/TC 38/SC 1,9599,"[3824,3814]",[40851],"['en','fr']",2,"<p>Drops of a solution of acid are placed on the specimen, the surface of which is rubbed gently with a glass rod to ensure penetration. The changes in colour of the textile, while it is still wet and after drying, are assessed with the grey scale. Three tests differing in severity are provided.</p>"

36358,IS,Cor,ISO 105-E05:1989/Cor 1:2002,Textiles — Tests for colour fastness — Part E05: Colour fastness to spotting: Acid — Technical Corrigendum 1,Textiles — Essais de solidité des teintures — Partie E05: Solidité des teintures aux acides — Rectificatif technique 1,2002-02-14,3,['59.080.01'],ISO/TC 38/SC 1,9599,,[40851],"['en','fr']",1,

40851,IS,,ISO 105-E05:2006,Textiles — Tests for colour fastness — Part E05: Colour fastness to spotting: Acid,Textiles — Essais de solidité des teintures — Partie E05: Solidité des teintures aux acides,2006-06-21,4,['59.080.01'],ISO/TC 38/SC 1,9599,"[3825,36358]",[55898],"['en','fr']",3,"<p>ISO 105-E05:2006 specifies a method for determining the resistance of the colour of textiles of all kinds, and in all forms, to the action of dilute solutions of organic and mineral acids.</p><p>Four tests differing in severity are provided. Any or all may be used, depending upon the nature of the fibre.</p>"

3826,IS,,ISO 105-E06:1987,Textiles — Tests for colour fastness — Part E06: Colour fastness to spotting : Alkali,Textiles — Essais de solidité des teintures — Partie E06: Solidité des teintures aux alcalis,1987-12-17,2,['59.080.01'],ISO/TC 38/SC 1,9599,,[3827],"['en','fr']",,

3827,IS,,ISO 105-E06:1989,Textiles — Tests for colour fastness — Part E06: Colour fastness to spotting: Alkali,Textiles — Essais de solidité des teintures — Partie E06: Solidité des teintures aux alcalis,1989-12-14,3,['59.080.01'],ISO/TC 38/SC 1,9599,"[3814,3826]",[40852],"['en','fr']",2,"<p>Drops of a solution of sodium carbonate are placed on the specimen (textiles of all kinds and in all forms), the surface of which is rubbed gently with a glass rod to ensure penetration. The change in colour of the textile is assessed with the grey scale.</p>"

36366,IS,Cor,ISO 105-E06:1989/Cor 1:2002,Textiles — Tests for colour fastness — Part E06: Colour fastness to spotting: Alkali — Technical Corrigendum 1,Textiles — Essais de solidité des teintures — Partie E06: Solidité des teintures aux alcalis — Rectificatif technique 1,2002-02-14,3,['59.080.01'],ISO/TC 38/SC 1,9599,,[40852],"['en','fr']",1,

3828,IS,,ISO 105-E07:1987,Textiles — Tests for colour fastness — Part E07: Colour fastness to spotting : Water,Textiles — Essais de solidité des teintures — Partie E07: Solidité des teintures à la goutte d'eau,1987-12-17,2,['59.080.01'],ISO/TC 38/SC 1,9599,,[3829],,,

3829,IS,,ISO 105-E07:1989,Textiles — Tests for colour fastness — Part E07: Colour fastness to spotting: Water,Textiles — Essais de solidité des teintures — Partie E07: Solidité des teintures à la goutte d'eau,1989-12-14,3,['59.080.01'],ISO/TC 38/SC 1,9599,"[3828,3814]",[52232],"['en','fr']",2,"<p>Drops of water are worked into the specimen (textiles of all kinds and in all forms) with a glass rod, and the change in colour of the textile is assessed with the grey scale after 2 min and after drying.</p>"

36367,IS,Cor,ISO 105-E07:1989/Cor 1:2002,Textiles — Tests for colour fastness — Part E07: Colour fastness to spotting: Water — Technical Corrigendum 1,Textiles — Essais de solidité des teintures — Partie E07: Solidité des teintures à la goutte d'eau — Rectificatif technique 1,2002-02-14,3,['59.080.01'],ISO/TC 38/SC 1,9599,,[52232],"['en','fr']",1,

3830,IS,,ISO 105-E08:1987,Textiles — Tests for colour fastness — Part E08: Colour fastness to water : Hot water,Textiles — Essais de soliité des teintures — Partie E08: Solidité des teintures à l'eau : Eau chaude,1987-12-17,2,['59.080.01'],ISO/TC 38/SC 1,9599,[3814],[21299],"['en','fr']",2,

3831,IS,,ISO 105-E09:1987,Textiles — Tests for colour fastness — Part E09: Colour fastness to potting,Textiles — Essais de solidité des teintures — Partie E09: Solidité des teintures au décatissage à l'eau bouillante,1987-12-17,2,['59.080.01'],ISO/TC 38/SC 1,9599,,[3832],['fr'],,

3832,IS,,ISO 105-E09:1989,Textiles — Tests for colour fastness — Part E09: Colour fastness to potting,Textiles — Essais de solidité des teintures — Partie E09: Solidité des teintures au décatissage à l'eau bouillante,1989-12-14,3,['59.080.01'],ISO/TC 38/SC 1,9599,"[3831,3814]",[52233],"['en','fr']",2,<p>A specimen of the textile (textiles of all kinds and in all forms) between adjacent fabrics is rolled around a glass rod and treated with boiling water. The specimen and the adjacent fabrics are dried separately. The change in colour of the specimen and the staining of the adjacent fabrics are assessed with the grey scales. The method is mainly applicable to wool and textiles containing wool.

36368,IS,Cor,ISO 105-E09:1989/Cor 1:2002,Textiles — Tests for colour fastness — Part E09: Colour fastness to potting — Technical Corrigendum 1,Textiles — Essais de solidité des teintures — Partie E09: Solidité des teintures au décatissage à l'eau bouillante — Rectificatif technique 1,2002-02-14,3,['59.080.01'],ISO/TC 38/SC 1,9599,,[52233],"['en','fr']",1,

3833,IS,,ISO 105-E10:1987,Textiles — Tests for colour fastness — Part E10: Colour fastness to decatizing,Textiles — Essais de solidité des teintures — Partie E10: Solidité des teintures au décatissage,1987-12-17,2,['59.080.01'],ISO/TC 38/SC 1,9599,[3814],[21300],"['en','fr']",2,

3834,IS,,ISO 105-E11:1987,Textiles — Tests for colour fastness — Part E11: Colour fastness to steaming,Textiles — Essais de solidité des teintures — Partie E11: Solidité des teintures au vaporisage à la pression atmosphérique,1987-12-17,2,['59.080.01'],ISO/TC 38/SC 1,9599,[3814],[21301],"['en','fr']",2,

3835,IS,,ISO 105-E12:1987,Textiles — Tests for colour fastness — Part E12: Colour fastness to milling : Alkaline milling,Textiles — Essais de solidité des teintures — Partie E12: Solidité des teintures au foulon : Foulon alcalin,1987-12-17,2,['59.080.01'],ISO/TC 38/SC 1,9599,,[3836],"['en','fr']",,

3836,IS,,ISO 105-E12:1989,Textiles — Tests for colour fastness — Part E12: Colour fastness to milling: Alkaline milling,Textiles — Essais de solidité des teintures — Partie E12: Solidité des teintures au foulon: Foulon alcalin,1989-12-14,3,['59.080.01'],ISO/TC 38/SC 1,9599,"[3835,3814]",[52234],"['en','fr']",3,"<p>A specimen of the textile in contact with one or two specified adjacent fabrics is milled in a jar containing steel balls and a solution of soap and sodium carbonate. The severity of the action is controlled by means of a dyed test-control piece milled separately in the same way. After rinsing and drying, the change in colour of the specimen and the staining of the adjacent fabrics

35282,IS,Amd,ISO 105-E12:1989/Amd 1:2002,Textiles — Tests for colour fastness — Part E12: Colour fastness to milling: Alkaline milling — Amendment 1,Textiles — Essais de solidité des teintures — Partie E12: Solidité des teintures au foulon: Foulon alcalin — Amendement 1,2002-11-15,3,['59.080.01'],ISO/TC 38/SC 1,9599,,[52234],"['en','fr']",3,

36369,IS,Cor,ISO 105-E12:1989/Cor 1:2002,Textiles — Tests for colour fastness — Part E12: Colour fastness to milling: Alkaline milling — Technical Corrigendum 1,Textiles — Essais de solidité des teintures — Partie E12: Solidité des teintures au foulon: Foulon alcalin — Rectificatif technique 1,2002-02-14,3,['59.080.01'],ISO/TC 38/SC 1,9599,,[52234],"['en','fr']",1,

3837,IS,,ISO 105-E13:1987,Textiles — Tests for colour fastness — Part E13: Colour fastness to acid-felting : Severe,Textiles — Essais de solidité des teintures — Partie E13: Solidité des teintures au foulon acide : Essai fort,1987-12-17,2,['59.080.01'],ISO/TC 38/SC 1,9599,[3814],[21302],"['en','fr']",2,

3838,IS,,ISO 105-E14:1987,Textiles — Tests for colour fastness — Part E14: Colour fastness to acid-felting: Mild,Textiles — Essais de solidité des teintures — Partie E14: Solidité des teintures au foulon acide: Essai doux,1987-12-17,2,['59.080.01'],ISO/TC 38/SC 1,9599,[3814],[21303],"['en','fr']",2,

3839,IS,,ISO 105-F:1982,Textiles — Tests for colour fastness — Part F: Standard adjacent fabrics,Textiles — Essais de solidité des teintures — Partie F: Tissus témoins,1982-09-01,2,['59.080.01'],ISO/TC 38,9599,,[3840],"['en','fr']",14,

3840,IS,,ISO 105-F:1985,Textiles — Tests for colour fastness — Part F: Standard adjacent fabrics,Textiles — Essais de solidité des teintures — Partie F: Tissus témoins,1985-10-24,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3839],"[42323,32948,32944,32945,42324,32949,32946,32950,32947]","['en','fr']",20,<p>The specifications included in ISO 105/F are intended to establish undyed adjacent fabrics from different single fibres which may be used for the assessment of staining in colour fastness test procedure. These single-fibre adjacent fabrics exhibit standardized staining properties. The parts of ISO 105/F provide single-fibre adjacent fabrics as follows: F01: Wool; F02: Cotton and viscose; F03: Poly

3854,IS,,ISO 105-G:1978,Textiles — Tests for colour fastness — Part G: Colour fastness to atmospheric contaminants,Textiles — Essais de solidité des teintures — Partie G: Solidité des teintures aux agents atmosphériques de dégradation,1978-12-01,1,['59.080.01'],ISO/TC 38/SC 1,9599,,[20026],"['en','fr']",15,

20026,IS,,ISO 105-G01:1993,Textiles — Tests for colour fastness — Part G01: Colour fastness to nitrogen oxides,Textiles — Essais de solidité des teintures — Partie G01: Solidité des teintures aux oxydes d'azote,1993-09-30,2,['59.080.01'],ISO/TC 38/SC 1,9599,[3854],"[61640,62599,40307]","['en','fr']",7,<p>Specimens of textiles are exposed to nitrogen oxides. Two test differing in severity are provided.</p>

26419,IS,Cor,ISO 105-G01:1993/Cor 1:1995,Textiles — Tests for colour fastness — Part G01: Colour fastness to nitrogen oxides — Technical Corrigendum 1,Textiles — Essais de solidité des teintures — Partie G01: Solidité des teintures aux oxydes d'azote — Rectificatif technique 1,1995-10-26,2,['59.080.01'],ISO/TC 38/SC 1,9599,,"[61640,62599,40307]","['en','fr']",1,<p>Replaces the existing text in subclause 4.6 and corrects the sixth line in clause B.2.</p>

3858,IS,,ISO 105-G04:1989,Textiles — Tests for colour fastness — Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities,Textiles — Essais de solidité des teintures — Partie G04: Solidité des teintures aux oxydes d'azote en atmosphère à taux d'humidité élevés,1989-12-07,1,['59.080.01'],ISO/TC 38/SC 1,9599,,[42547],"['en','fr']",3,<p>A test specimen and a apiece of control fabric are simultaneously exposed to oxides of nitrogen in an atmosphere which is maintained at 87.5 % 2.5 % relative humidity and at temperature of 40 °C 1 °C until the control fabric shows a colour change corresponding to that of a reference of fading. The exposure/measurement cycle is repeate

3859,IS,,ISO 105-J:1982,Textiles — Tests for colour fastness — Part J: Measurement of colour and colour differences,Textiles — Essais de solidité des teintures — Partie J: Mesurage de la couleur et des différences de couleur,1982-09-01,1,,ISO/TC 38/SC 1,9599,,"[3861,3863]","['en','fr']",1,

3860,IS,,ISO 105-J01:1987,Textiles — Tests for colour fastness — Part J01: Method for the measurement of colour and colour differences,Textiles — Essais de solidité des teintures — Partie J01: Méthode de mesurage de la couleur et des différences de couleur,1987-12-10,2,['59.080.01'],ISO/TC 38/SC 1,9599,,[3861],"['en','fr']",,

3861,IS,,ISO 105-J01:1989,Textiles — Tests for colour fastness — Part J01: Measurement of colour and colour differences,Textiles — Essais de solidité des teintures — Partie J01: Méthode de mesurage de la couleur et des différences de couleur,1989-12-07,3,['59.080.01'],ISO/TC 38/SC 1,9599,"[3859,3860]",[3862],"['en','fr']",2,

3863,IS,,ISO 105-J02:1987,Textiles — Tests for colour fastness — Part J02: Method for the instrumental assessment of whiteness,Textiles — Essais de solidité des teintures — Partie J02: Méthode instrumentale de détermination de la blancheur,1987-12-10,1,['59.080.01'],ISO/TC 38/SC 1,9599,[3859],[21984],"['en','fr']",2,

22751,IS,,ISO 105-J03:1995,Textiles — Tests for colour fastness — Part J03: Calculation of colour differences,Textiles — Essais de solidité des teintures — Partie J03: Calcul des écarts de couleur,1995-08-17,1,['59.080.01'],ISO/TC 38/SC 1,9599,,[51385],"['en','fr']",8,"<p>Provides a method of calculating the colour difference between two specimens of the same textil material, measured under the same conditions. Permits the specification of a maximum value and provides a means for establishing the ratio of differences in lightness to chroma and to hue. Partial revision of the third edition of ISO 105-J01.</p>"

27268,IS,Cor,ISO 105-J03:1995/Cor 1:1996,Textiles — Tests for colour fastness — Part J03: Calculation of colour differences — Technical Corrigendum 1,Textiles — Essais de solidité des teintures — Partie J03: Calcul des écarts de couleur — Rectificatif technique 1,1996-06-06,1,['59.080.01'],ISO/TC 38/SC 1,9599,,[51385],['en'],1,

44088,IS,Cor,ISO 105-J03:1995/Cor 2:2006,Textiles — Tests for colour fastness — Part J03: Calculation of colour differences — Technical Corrigendum 2,Textiles — Essais de solidité des teintures — Partie J03: Calcul des écarts de couleur — Rectificatif technique 2,2006-03-24,1,['59.080.01'],ISO/TC 38/SC 1,9599,,[51385],"['en','fr']",2,

3864,IS,,ISO 105-N:1978,Textiles — Tests for colour fastness — Part N: Colour fastness to bleaching agencies,Textiles — Essais de solidité des teintures — Partie N: Solidité des teintures aux agents de blanchissement,1978-12-01,1,['59.080.01'],ISO/TC 38/SC 1,9599,,[3865],"['en','fr']",10,

3870,IS,,ISO 105-P:1978,Textiles — Tests for colour fastness — Part P: Colour fastness to heat treatments,Textiles — Essais de solidité des teintures — Partie P: Solidité des teintures aux traitements thermiques,1978-12-01,1,['59.080.01'],ISO/TC 38/SC 1,9599,,[3871],"['en','fr']",6,

3872,IS,,ISO 105-P02:1993,Textiles — Tests for colour fastness — Part P02: Colour fastness to pleating: Steam pleating,Textiles — Essais de solidité des teintures — Partie P02: Solidité des teintures au plissage: Plissage à la vapeur,1993-09-23,2,['59.080.01'],ISO/TC 38/SC 1,9599,,[36881],"['en','fr']",5,<p>Three test differing in severity are provided. It is emphasized that the test is not intended for assessing the quality of the pleating process.</p>

31912,IS,Cor,ISO 105-P02:1993/Cor 1:1999,Textiles — Tests for colour fastness — Part P02: Colour fastness to pleating: Steam pleating — Technical Corrigendum 1,Textiles — Essais de solidité des teintures — Partie P02: Solidité des teintures au plissage: Plissage à la vapeur — Rectificatif technique 1,1999-05-06,2,['59.080.01'],ISO/TC 38/SC 1,9599,,[36881],"['en','fr']",1,

3873,IS,,ISO 105-S:1978,Textiles — Tests for colour fastness — Part S: Colour fastness to vulcanizing,Textiles — Essais de solidité des teintures — Partie S: Solidité des teintures à la vulcanisation,1978-08-01,1,['59.080.01'],ISO/TC 38/SC 1,9599,,[3874],"['en','fr']",6,

3877,IS,,ISO 105-X:1984,Textiles — Tests for colour fastness — Part X: Tests not included in parts A to S or part Z,Textiles — Essais de solidité des teintures — Partie X: Solidité des teintures à des agents autres que ceux spécifiés dans les parties A à S et Z,1984-09-01,2,['59.080.01'],ISO/TC 38/SC 1,9599,,"[3888,3885,3892,3889,3886,3878,3882,3879,3891,3883,3887,3884,3881]","['en','fr']",29,

3878,IS,,ISO 105-X01:1987,Textiles — Tests for colour fastness — Part X01: Colour fastness to carbonizing : Aluminium chloride,Textiles — Essais de solidité des teintures — Partie X01: Solidité des teintures au carbonisage: Chlorure d'aluminium,1987-12-17,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3877],[22235],"['en','fr']",2,

3879,IS,,ISO 105-X02:1987,Textiles — Tests for colour fastness — Part X02: Colour fastness to carbonizing: Sulphuric acid,Textiles — Essais de solidité des teintures — Partie X02: Solidité des teintures au carbonisage: Acide sulfurique,1987-12-17,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3877],[22236],"['en','fr']",2,

3881,IS,,ISO 105-X04:1987,Textiles — Tests for colour fastness — Part X04: Colour fastness to mercerizing,Textiles — Essais de solidité des teintures — Partie X04: Solidité des teintures au mercerisage,1987-12-17,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3877],[21297],"['en','fr']",2,

3882,IS,,ISO 105-X05:1987,Textiles — Tests for colour fastness — Part X05: Colour fastness to organic solvents,Textiles — Essais de solidité des teintures — Partie X05: Solidité des teintures aux solvants organiques,1987-12-17,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3877],[21298],"['en','fr']",2,

3883,IS,,ISO 105-X06:1987,Textiles — Tests for colour fastness — Part X06: Colour fastness to soda boiling,Textiles — Essais de solidité des teintures — Partie X06: Solidité des teintures au débouillissage à l'air libre,1987-12-17,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3877],[21304],['en'],2,

3884,IS,,ISO 105-X07:1987,Textiles — Tests for colour fastness — Part X07: Colour fastness to cross-dyeing : Wool,Textiles — Essais de solidité des teintures — Partie X07: Solidité des teintures à la surteinture : Laine,1987-12-17,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3877],[21305],"['en','fr']",2,

3885,IS,,ISO 105-X08:1987,Textiles — Tests for colour fastness — Part X08: Colour fastness to degumming,Textiles — Essais de solidité des teintures — Partie X08: Solidité des teintures au décreusage,1987-12-17,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3877],[21306],"['en','fr']",2,

3886,IS,,ISO 105-X09:1987,Textiles — Tests for colour fastness — Part X09: Colour fastness to formaldehyde,Textiles — Essais de solidité des teintures — Partie X09: Solidité des teintures au formaldéhyde,1987-12-17,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3877],[22237],"['en','fr']",1,

3887,IS,,ISO 105-X10:1987,Textiles — Tests for colour fastness — Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings,Textiles — Essais de solidité des teintures — Partie X10: Évaluation de la migration des teintures des textiles dans les enductions de polychlorure de vinyle,1987-12-17,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3877],[22238],"['en','fr']",2,

3888,IS,,ISO 105-X11:1987,Textiles — Tests for colour fastness — Part X11: Colour fastness to hot pressing,Textiles — Essais de solidité des teintures — Partie X11: Solidité des teintures au repassage à chaud,1987-12-17,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3877],[21307],"['en','fr']",2,

21307,IS,,ISO 105-X11:1994,Textiles — Tests for colour fastness — Part X11: Colour fastness to hot pressing,Textiles — Essais de solidité des teintures — Partie X11: Solidité des teintures au repassage à chaud,1994-09-01,4,['59.080.01'],ISO/TC 38/SC 1,9599,[3888],"[88346,80088]","['en','fr']",3,"<p>Tests are given for hot pressing when the textile is dry, when it is wet, and when it is damp. The end-use of the textile usually determines which test should be made. A dry specimen (dry pressing) or a dry specimen covered with a wet cotton adjacent fabric (damp pressing) or a wet specimen covered with a wet cotton adjacent fabric (wet pressing) are pressed with a heating device at a specified te

3889,IS,,ISO 105-X12:1987,Textiles — Tests for colour fastness — Part X12: Colour fastness to rubbing,Textiles — Essais de solidité des teintures — Partie X12: Solidité des teintures au frottement,1987-12-17,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3877],[20029],"['en','fr']",2,

20029,IS,,ISO 105-X12:1993,Textiles — Tests for colour fastness — Part X12: Colour fastness to rubbing,Textiles — Essais de solidité des teintures — Partie X12: Solidité des teintures au frottement,1993-08-26,4,['59.080.01'],ISO/TC 38/SC 1,9599,[3889],[32339],"['en','fr']",2,

32339,IS,,ISO 105-X12:2001,Textiles — Tests for colour fastness — Part X12: Colour fastness to rubbing,Textiles — Essais de solidité des teintures — Partie X12: Solidité des teintures au frottement,2001-05-10,5,['59.080.01'],ISO/TC 38/SC 1,9599,[20029],[65207],"['en','fr']",3,

3891,IS,,ISO 105-X13:1987,"Textiles — Tests for colour fastness — Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting",Textiles — Essais de solidité des teintures — Partie X13: Solidité des teintures sur laine aux traitements effectués avec des produits chimiques en vue du plissage et du fixage,1987-12-17,3,['59.080.01'],ISO/TC 38/SC 1,9599,[3877],[21292],"['en','fr']",3,

3892,IS,,ISO 105-X14:1987,Textiles — Tests for colour fastness — Part X14: Colour fastness to acid chlorination of wool : Sodium dichloroisocyanurate,Textiles — Essais de solidité des teintures — Partie X14: Solidité des teintures sur laine au chlorage acide — Dichloroisocyanurate de sodium,1987-12-17,2,['59.080.01'],ISO/TC 38/SC 1,9599,[3877],[21294],"['en','fr']",3,

32343,IS,,ISO 105-X16:2001,Textiles — Tests for colour fastness — Part X16: Colour fastness to rubbing — Small areas,Textiles — Essais de solidité des teintures — Partie X16: Solidité des teintures au frottement — Petites surfaces,2001-05-17,1,['59.080.01'],ISO/TC 38/SC 1,9599,,[65208],"['en','fr']",4,

3894,IS,,ISO 105-Z:1978,Textiles — Tests for colour fastness — Part Z: Colorant characteristics,Textiles — Essais de solidité des teintures — Partie Z: Caractéristiques des colorants,1978-12-01,1,['59.080.01'],ISO/TC 38/SC 1,9599,,[3895],"['en','fr']",2,

18571,IS,,ISO 10502:1992,Aerospace — Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 degrees C and 10 500 kPa — Procurement specification,"Aéronautique et espace — Tuyauteries flexibles en polytétrafluoroéthylène (PTFE), pour utilisation jusqu'à 232 degrés C et 10 500 kPa — Spécifications d'approvisionnement",1992-06-25,1,"['83.140.40','49.080']",ISO/TC 20/SC 10,9599,,[51714],"['en','fr']",14,"<p>Covers Class I fitting assemblies of corrosion-resistant steel or titanium parts (- 55 °C to + 232 °C) and Class II fitting assemblies of corrosion-resistant steel and aluminium parts, DN 12 and larger (- 55 °C to + 135 °C) for use in aircraft hydraulic, fuel and lubricating oil

18573,IS,,ISO 10504:1998,"Starch derivatives — Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups — Method using high-performance liquid chromatography","Produits dérivés de l'amidon — Détermination de la composition des sirops de glucose, des sirops de fructose et des sirops de glucose hydrogénés — Méthode par chromatographie en phase liquide à haute performance",1998-10-01,1,['67.180.20'],ISO/TC 93,9599,,[50792],"['en','fr']",7,

18577,IS,,ISO 10508:1995,Thermoplastics pipes and fittings for hot and cold water systems,Tubes et raccords en matières thermoplastiques destinés aux systèmes d'eaux chaude et froide,1995-10-19,1,"['23.040.45','23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[35045],"['en','fr']",15,"<p>Specifies the performance requirements for thermoplastics pipes and plastics or metal fittings used for hot and cold water pressure systems. Applies to plastics pipe systems used in buildings to supply with water under operating pressures of 4 bar, 6 bar or 10 bar. Gives a classification system for common service conditions for pressurized hot and cold water systems.</p>"

18578,IS,,ISO 10509:1992,Hexagon flange head tapping screws,Vis à tôle à tête hexagonale à embase cylindro-tronconique,1992-04-23,1,['21.060.10'],ISO/TC 2/SC 13,9599,,[57085],"['en','fr']",5,"<p>Specifies the characteristics (dimensions, designation) of screws with thread from ST2,2 up to and including ST9,5 as well as check on head and flange gauges A and B.</p>"

18579,IS,,ISO 10510:1999,Tapping screw and washer assemblies with plain washers,Vis à tôle à rondelle plate incorporée,1999-11-04,1,['21.060.10'],ISO/TC 2/SC 13,9599,,[56609],"['en','fr']",4,

18580,IS,,ISO 10511:1997,Prevailing torque type hexagon thin nuts (with non-metallic insert),Écrous hexagonaux bas autofreinés (à anneau non métallique),1997-11-06,1,['21.060.20'],ISO/TC 2/SC 12,9599,,[61369],"['en','fr']",4,

61369,IS,,ISO 10511:2012,Prevailing torque type hexagon thin nuts (with non-metallic insert),Écrous hexagonaux bas autofreinés (à anneau non métallique),2012-12-14,2,['21.060.20'],ISO/TC 2/SC 12,9599,[18580],"[66079,75030,86036]","['en','fr']",4,"<p>ISO 10511:2012 specifies the characteristics of prevailing torque type hexagon thin nuts (with non-metallic insert) with thread from M3 up to and including M36, in product grade A for threads up to and including M16 and product grade B for threads above M16, and with property classes 04 and 05.</p>"

18581,IS,,ISO 10512:1997,"Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread — Property classes 6, 8 and 10","Écrous hexagonaux autofreinés (à anneau non métallique), style 1, à filetage métrique à pas fin — Classes de qualité 6, 8 et 10",1997-11-06,1,['21.060.20'],ISO/TC 2/SC 12,9599,,[61370],"['en','fr']",4,

61370,IS,,ISO 10512:2012,"Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread — Property classes 6, 8 and 10","Écrous hexagonaux normaux autofreinés (à anneau non métallique) à filetage métrique à pas fin — Classes de qualité 6, 8 et 10",2012-12-14,2,['21.060.20'],ISO/TC 2/SC 12,9599,[18581],"[86037,66078,75031]","['en','fr']",4,"<p>ISO 10512:2012 specifies the characteristics of prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread with nominal thread diameters, <i>D</i>, from 8 mm up to and including 36 mm, in product grade A for diamter sizes up to and including 16 mm and product grade B for di

18582,IS,,ISO 10513:1997,"Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread — Property classes 8, 10 and 12","Écrous hexagonaux autofreinés tout métal, style 2, à filetage métrique à pas fin — Classes de qualité 8, 10 et 12",1997-10-30,1,['21.060.20'],ISO/TC 2/SC 12,9599,,[61371],"['en','fr']",4,

61371,IS,,ISO 10513:2012,"Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread — Property classes 8, 10 and 12","Écrous hexagonaux hauts autofreinés tout métal à filetage métrique à pas fin — Classes de qualité 8, 10 et 12",2012-12-14,2,['21.060.20'],ISO/TC 2/SC 12,9599,[18582],"[75032,86038,66077]","['en','fr']",4,"<p>ISO 10513:2012 specifies the characteristics of prevailing torque type all-metal hexagon high nuts with metric fine pitch thread with nominal thread diameters, D, from 8 mm up to and including 36 mm, in product grade A for diameter sizes up to and including 16 mm and product grade B for diameter sizes above 16 mm, and with property classes 8, 10 and

18585,IS,,ISO 10517:1993,"Portable powered hedge trimmers — Definitions, mechanical safety requirements and tests","Taille-haie portatifs à moteur — Définitions, prescriptions de sécurité mécanique et essais",1993-05-13,1,['65.060.70'],ISO/TC 23/SC 13,9599,,"[37290,22025]","['en','fr']",9,<p>Applies to hand-held hedge trimmers which are primarily designed for cutting hedges and bushes using one or more linear reciprocating cutter blades. Does not apply to hedge trimmers with rotating blades. For the electrical aspects of electrical powered hedge trimmers see IEC 745-2-15. Annex A gives safety instructions for portable powered hedge trimmers.</p>

37290,IS,,ISO 10517:2009,Powered hand-held hedge trimmers — Safety,Taille-haies portatifs à moteur — Sécurité,2009-07-17,2,['65.060.70'],ISO/TC 23/SC 13,9599,[18585],[68674],"['en','fr']",50,"<p>ISO 10517:2009 specifies safety requirements and their verification for the design and construction of hand-held, integrally-driven petrol combustion engine hedge trimmers designed to be used by a single operator for trimming hedges and bushes while utilizing one or more linear reciprocating cutter blades.</p><p>It establishes methods for the elimination or reduction of hazards arising from the use of the trimmers. In addition, it specifies the type of information to be provided by the manufacturer o

59779,IS,Amd,ISO 10517:2009/Amd 1:2013,Powered hand-held hedge trimmers — Safety — Amendment 1,Taille-haies portatifs à moteur — Sécurité — Amendement 1,2013-08-13,2,['65.060.70'],ISO/TC 23/SC 13,9599,,[68674],"['en','fr']",2,

18586,IS,,ISO 10518:1991,Powered walk-behind and hand-held lawn trimmers and lawn edge trimmers — Mechanical safety requirements and test methods,Coupe-bordures de gazon et coupe-gazon portables à la main et à conducteur à pied — Prescriptions de sécurité mécanique et méthodes d'essai,1991-04-25,1,['65.060.70'],ISO/TC 23/SC 13,9599,,[29042],"['en','fr']",8,"<p>Gives terms and definitions. Describes the general construction, the marking, the instructions to be given, the cutting means, the guarding of cutting means, and the mechanical strength. Annex A forms an integral part of this standard.</p>"

18588,IS,,ISO 10519:1992,Rapeseed — Determination of chlorophyll content — Spectrometric method,Graines de colza — Détermination de la teneur en chlorophylle — Méthode spectrométrique,1992-07-23,1,['67.200.20'],ISO/TC 34/SC 2,9599,,[22763],"['en','fr']",8,

22763,IS,,ISO 10519:1997,Rapeseed — Determination of chlorophyll content — Spectrometric method,Graines de colza — Détermination de la teneur en chlorophylle — Méthode spectrométrique,1997-10-16,2,['67.200.20'],ISO/TC 34/SC 2,9599,[18588],[66390],"['en','fr']",6,

5538,IS,,ISO 1052:1982,Steels for general engineering purposes,Aciers de construction mécanique d'usage général,1982-11-01,1,['77.140.01'],ISO/TC 17/SC 3,9599,,[32147],"['en','fr']",5,"<p>Specifies qualities of hot-rolled steel sheet 3 mm or more thick, flats and bars. The maximum composition limits are given in table 1. The steels in the delivery condition shall comply with the mechanical properties specified in table 2. An annex refers to location and orientation of samples of bars and sections.</p>"

18590,IS,,ISO 10521:1992,Motor vehicle road load — Determination under reference atmospheric conditions and reproduction on chassis dynamometer,Résistance sur route des véhicules à moteur — Détermination dans les conditions atmosphériques de référence et reproduction sur banc dynamométrique,1992-11-12,1,['43.020'],ISO/TC 22,9599,,"[37533,37534]","['en','fr']",19,"<p>Specifies methods of setting a chassis dynamometer for test purposes, e.g. for fuel consumption tests or exhaust emission measurements. Measurements are based on either the coastdown or the torquemeter method. Gives detailed instructions on the measurement of relevant parameters during data collection, on the analysis techniques

18591,IS,,ISO 10522:1993,Agricultural irrigation equipment — Direct-acting pressure-regulating valves,Matériel agricole d'irrigation — Vannes de régulation de la pression à action directe,1993-11-18,1,['65.060.35'],ISO/TC 23/SC 18,9599,,"[78121,39767]","['en','fr']",12,"<p>Specifies construction and performance requirements and test methods for pressure regulators intended for operation in irrigation systems, with water at temperatures not exceeding 50 °C, which may contain fertilizers and chemicals of types and in concentrations commonly used. Applies to pressure regulators in nominal sizes up to and including 80 mm (3 in).</p>"

18592,IS,,ISO 10523:1994,Water quality — Determination of pH,Qualité de l'eau — Détermination du pH,1994-07-28,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[51994],"['en','fr']",10,"<p>The method specified (using a pH-meter) is applicable to all types of water and waste water samples in the range from pH 3 to pH 10. The temperature, some gases and organic materials interfere with the pH-measurement. Suspended materials in the sample may cause significant errors. When measuring sewage and some surface waters, there is a particularly high risk of smearing the electrodes or contaminating the membranes and diaphragm with oil, grease or other contaminants.</p>"

38491,IS,,ISO 10524-1:2006,Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators with flow-metering devices,Détendeurs pour l'utilisation avec les gaz médicaux — Partie 1: Détendeurs et détendeurs-débitmètres,2006-01-30,1,['11.040.10'],ISO/TC 121/SC 6,9599,"[18593,27187]",[67190],"['en','fr','ru']",30,"<p>ISO 10524-1:2006 is applicable to the types of pressure regulators listed and is intended for the administration of the following medical gases in the treatment, management, diagnostic evaluation and care of patients:</p><ul><li>oxygen;</li><li>nitrous oxide;</li><li>air for breathing;</li><li>helium;</li><li>carbon dioxide;</li><li>xenon;</li>

18593,IS,,ISO 10524:1995,Pressure regulators and pressure regulators with flow-metering devices for medical gas systems,Régulateurs de pression avec ou sans débitmètre pour systèmes de gaz médicaux,1995-11-30,1,['11.040.10'],ISO/TC 121/SC 6,9599,,[38491],['en'],21,"<p>Specifies requirements for high- and low-pressure regulators and high- and low-pressure regulators with flow-metering devices intended for the administration of medical gases in the treatment, diagnostic evaluation and care of patients. Does not apply to regulators that are an integral part of medical gas pipeline systems.</p>"

27187,IS,Cor,ISO 10524:1995/Cor 1:1996,Pressure regulators and pressure regulators with flow-metering devices for medical gas systems — Technical Corrigendum 1,Régulateurs de pression avec ou sans débitmètre pour systèmes de gaz médicaux — Rectificatif technique 1,1996-06-29,1,['11.040.10'],ISO/TC 121/SC 6,9599,,[38491],['en'],1,<p>Contains a great number of corrections regarding the most of the existing clauses.</p>

35371,IS,,ISO 10524-2:2005,Pressure regulators for use with medical gases — Part 2: Manifold and line pressure regulators,Détendeurs pour l'utilisation avec les gaz médicaux — Partie 2: Détendeurs de rampes et de canalisations,2005-05-13,1,['11.040.10'],ISO/TC 121/SC 6,9599,,[66690],"['en','fr']",28,<p>ISO 10524-2:2005 specifies requirements for manifold pressure regulators intended to be connected to cylinders with nominal filling pressures up to 25 000 kPa at 15 °C and for line pressure regulators for inlet pressures up to 3 000 kPa and intended for use in pipeline systems for the following medical gases:</p>oxygen; nitrous oxide; air for breathing; carbon dioxide; oxygen/nitrous oxide mix

35372,IS,,ISO 10524-3:2005,Pressure regulators for use with medical gases — Part 3: Pressure regulators integrated with cylinder valves,Détendeurs pour l'utilisation avec les gaz médicaux — Partie 3: Détendeurs intégrés dans les robinets des bouteilles de gaz,2005-05-19,1,['11.040.10'],ISO/TC 121/SC 6,9599,,[66691],"['en','fr']",33,"<p>ISO 10524-3:2005 applies to pressure regulators integrated with cylinder valves intended for the administration of medical gases in the treatment, management, diagnostic evaluation and care of patients for use with the following medical gases:</p> oxygen; nitrous oxide; air for breathing; helium; carbon dioxide; xenon; specified mixtures of the gases listed ab

44249,IS,Amd,ISO 10524-3:2005/Amd 1:2013,Pressure regulators for use with medical gases — Part 3: Pressure regulators integrated with cylinder valves — Amendment 1: Filtration and information to be supplied by the manufacturer,Détendeurs pour l'utilisation avec les gaz médicaux — Partie 3: Détendeurs intégrés dans les robinets des bouteilles de gaz — Amendement 1: Filtrage et informations à fournir par le fabricant,2013-02-28,1,['11.040.10'],ISO/TC 121/SC 6,9599,,[66691],"['en','fr']",2,

18594,IS,,ISO 10525:1997,Counterbalanced trucks handling freight containers of 6 m (20 ft) length and above — Additional stability tests,Chariots élévateurs travaillant en porte-à-faux manutentionnant des conteneurs pour le transport de marchandises de longueur égale ou supérieure à 6 m (20 ft) — Essais de stabilité supplémentaires,1997-10-16,1,['53.060'],ISO/TC 110/SC 2,9599,,[59940],"['en','fr']",11,

41640,IS,,ISO 10526:2007,CIE standard illuminants for colorimetry,Illuminants colorimétriques normalisés CIE,2007-10-15,1,['17.180.20'],CIE,9599,[30604],[52496],"['en','fr']",14,<p>ISO 11664-2:2007 comprises ISO 10526:2007 and ISO 10526:2007/Cor.1:2008. Its technical content is identical to that of ISO 10526:2007. ISO 10526:2007/Cor.1:2008 changes the reference number of the standard from 10526 to 11664-2.</p><p>ISO 11664-2:2007 specifies two illuminants for use in colorimetry. The illuminants are the CIE standard illuminant A and the CIE standard illuminant D65.</p>

52474,IS,Cor,ISO 10526:2007/Cor 1:2008,CIE standard illuminants for colorimetry — Technical Corrigendum 1,Illuminants colorimétriques normalisés CIE — Rectificatif technique 1,2008-11-07,1,['17.180.20'],CIE,9599,,[52496],"['en','fr']",1,

37408,IS,,ISO 10527:2007,CIE standard colorimetric observers,Observateurs de référence colorimétriques CIE,2007-10-15,1,['17.180.20'],CIE,9599,[18596],[52495],"['en','fr']",30,<p>ISO 11664-1:2007 comprises ISO 10527:2007 and ISO 10527:2007/Cor.1:2008. Its technical content is identical to that of ISO 10527:2007. ISO 10527:2007/Cor.1:2008 changes the reference number of the standard from 10527 to 11664-1.</p><p>ISO 11664-1:2007 specifies colour-matching functions for use in colorimetry. Two sets of colour-matching functions are specified: colour-matching functions for the CIE 1931 standard colorimetric observer and colour-matching functions for the CIE 1964 standard colorimetric observer.</p>

52494,IS,Cor,ISO 10527:2007/Cor 1:2008,CIE standard colorimetric observers — Technical Corrigendum 1,Observateurs de référence colorimétriques CIE — Rectificatif technique 1,2008-11-07,1,['17.180.20'],CIE,9599,,[52495],"['en','fr']",1,