Withdrawn and superseded ISO standards — page 81 of 246

41043,IS,,ISO 22734-1:2008,Hydrogen generators using water electrolysis process — Part 1: Industrial and commercial applications,Générateurs d'hydrogène utilisant le procédé d'électrolyse de l'eau — Partie 1: Applications industrielles et commerciales,2008-06-24,1,"['71.120.99','71.100.20']",ISO/TC 197,9599,[36454],[69212],"['en','fr']",40,"<p>ISO 22734-1:2008 defines the construction, safety and performance requirements of packaged or factory matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen and oxygen gas.</p><p>It is applicable to hydrogen generators that use the following types o

41044,IS,,ISO 22734-2:2011,Hydrogen generators using water electrolysis process — Part 2: Residential applications,Générateurs d'hydrogène utilisant le procédé d'électrolyse de l'eau — Partie 2: Applications résidentielles,2011-11-15,1,"['71.120.99','71.100.20']",ISO/TC 197,9599,[36454],[69212],['en'],44,"<p>ISO 22734-2:2011 defines the construction, safety and performance requirements of packaged hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen.</p><p>ISO 22734-2:2011 is applicable to hydrogen generators that use the following types of ion transport medium: a group of aqueous bases or soli

69212,IS,,ISO 22734:2019,"Hydrogen generators using water electrolysis — Industrial, commercial, and residential applications","Générateurs d'hydrogène utilisant le procédé de l'électrolyse de l'eau — Applications industrielles, commerciales et résidentielles",2019-09-30,1,"['71.120.99','71.100.20']",ISO/TC 197,9599,"[41043,41044]",[82766],['en'],48,"<p>This document defines the construction, safety, and performance requirements of modular or factory-matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen.</p><p>This document is applicable to hydrogen generators that use the following type

73771,IS,,ISO 22739:2020,Blockchain and distributed ledger technologies — Vocabulary,Technologies de chaîne de blocs et de registre distribué — Vocabulaire,2020-07-13,1,"['35.030','01.040.35','35.240.99','35.240.40']",ISO/TC 307,9599,,[82208],"['en','fr']",10,<p>This document provides fundamental terminology for blockchain and distributed ledger technologies.</p>

35115,IS,,ISO 22742:2005,Packaging — Linear bar code and two-dimensional symbols for product packaging,Emballages — Code-barres linéaire et symboles bidimensionnels pour l'emballage de produits,2005-01-12,1,"['01.080.99','55.020']",ISO/TC 122,9599,,[53004],['en'],35,"<p>ISO 22742:2005 specifies the minimum requirements for the design of labels containing a linear bar code and two-dimensional symbols on product packages to convey data between trading partners; provides guidance for the formatting on the label of data presented in a linear bar code, two-dimensional symbols or human-readable form; provides specific recommendations regarding the choice of linear bar code and 2D symbologies; spec

53004,IS,,ISO 22742:2010,Packaging — Linear bar code and two-dimensional symbols for product packaging,Emballages — Code-barres linéaire et symboles bidimensionnels pour emballage de produits,2010-12-15,2,"['01.080.99','55.020']",ISO/TC 122,9599,[35115],[87746],['en'],47,"<p>ISO 22742:2010</p><ol><li> specifies the minimum requirements for the design of labels containing a linear bar code and two‑dimensional symbols on product packages to convey data between trading partners,</li><li> provides guidance for the formatting on the label of data presented in a linear bar code, two‑dimensional symbols or human‑readable form,</li><li> provides specific recommendations regar

7097,IS,,ISO 2276:1972,Reciprocating internal combustion engines — Definition of right-hand and left-hand single bank engines,Moteurs alternatifs à combustion interne — Définition des moteurs en ligne droite et gauche,1972-05-01,1,['27.020'],ISO/TC 70,9599,,[5797],"['en','fr']",3,

35117,IS,,ISO 22762-1:2005,Elastomeric seismic-protection isolators — Part 1: Test methods,Appareils d'appuis structuraux en élastomère pour protection sismique — Partie 1: Méthodes d'essai,2005-07-22,1,['83.140.99'],ISO/TC 45/SC 4,9599,,[50394],['en'],78,"<p>ISO 22762 applies to elastomeric seismic isolators used to provide buildings or bridges with protection from earthquake damage. The isolators covered consist of alternate elastomer layers and reinforcing steel plates. They are placed between a superstructure and its substructure to provide both flexibility for decoupling structural systems from ground motion, and damping capability to reduce displacement at the isolation interface and t

44502,IS,Cor,ISO 22762-1:2005/Cor 1:2006,Elastomeric seismic-protection isolators — Part 1: Test methods — Technical Corrigendum 1,Appareils d'appuis structuraux en élastomère pour protection sismique — Partie 1: Méthodes d'essai — Rectificatif technique 1,2006-07-11,1,['83.140.99'],ISO/TC 45/SC 4,9599,,[50394],['en'],1,

50394,IS,,ISO 22762-1:2010,Elastomeric seismic-protection isolators — Part 1: Test methods,Appareils d'appuis structuraux en élastomère pour protection sismique — Partie 1: Méthodes d'essai,2010-10-21,2,['83.140.99'],ISO/TC 45/SC 4,9599,"[44502,35117]",[70215],['en'],77,"<p>ISO 22762-1:2010 specifies the test methods for determination of the properties of the rubber material used to manufacture the elastomeric seismic isolators, and for determination of the characteristics of elastomeric seismic isolators.</p><p>It is applicable to elastomeric seismic isolators used to provide buildings or bridges with protection from earthquake damage. The isolators covered consist of alternate elastomeric

70215,IS,,ISO 22762-1:2018,Elastomeric seismic-protection isolators — Part 1: Test methods,Appareils d'appuis structuraux en élastomère pour protection sismique — Partie 1: Méthodes d'essai,2018-09-25,3,['83.140.99'],ISO/TC 45/SC 4,9599,[50394],[89165],['en'],79,"<p>This document specifies the test methods for determination of</p><p>a) the properties of the rubber material used to manufacture the elastomeric seismic isolators, and</p><p>b) the characteristics of elastomeric seismic isolators.</p><p>It is applicable to elastomeric seismic isolators used to provide buildings or bridges with protection from earthquake damage. The isolators covered consist of alternate elastomeric layers and

36980,IS,,ISO 22762-2:2005,Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications,Appareils d'appuis structuraux en élastomère pour protection sismique — Partie 2: Applications pour ponts — Spécifications,2005-07-22,1,"['83.140.99','93.040']",ISO/TC 45/SC 4,9599,,[50395],['en'],57,"<p>ISO 22762 applies to elastomeric seismic isolators used to provide buildings or bridges with protection from earthquake damage. The isolators covered consist of alternate elastomer layers and reinforcing steel plates. They are placed between a superstructure and its substructure to provide both flexibility for decoupling structural systems from ground motion, and damping ca

44513,IS,Cor,ISO 22762-2:2005/Cor 1:2006,Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications — Technical Corrigendum 1,Appareils d'appuis structuraux en élastomère pour protection sismique — Partie 2: Applications pour ponts — Spécifications — Rectificatif technique 1,2006-07-11,1,"['83.140.99','93.040']",ISO/TC 45/SC 4,9599,,[50395],['en'],2,

50395,IS,,ISO 22762-2:2010,Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications,Appareils d'appuis structuraux en élastomère pour protection sismique — Partie 2: Applications pour ponts — Spécifications,2010-10-21,2,"['83.140.99','93.040']",ISO/TC 45/SC 4,9599,"[36980,44513]",[70218],['en'],55,"<p>ISO 22762-2:2010 specifies minimum requirements and test methods for elastomeric seismic isolators used for bridges, as well as rubber material used in the manufacture of such isolators.</p><p>It is applicable to elastomeric seismic isolators used to provide bridges with protection from earthquake damage. The isolators covered consist of alternate elastomeric

70218,IS,,ISO 22762-2:2018,Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications,Appareils d'appuis structuraux en élastomère pour protection sismique — Partie 2: Applications pour ponts — Spécifications,2018-09-27,3,"['83.140.99','93.040']",ISO/TC 45/SC 4,9599,[50395],[89166],['en'],56,"<p>This document specifies minimum requirements and test methods for elastomeric seismic isolators used for bridges, as well as rubber material used in the manufacture of such isolators.</p><p>It is applicable to elastomeric seismic isolators used to provide bridges with protection from earthquake damage. The isolators covered consist of alternate elastomeric layers and

36981,IS,,ISO 22762-3:2005,Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications,Appareils d'appuis structuraux en élastomère pour protection sismique — Partie 3: Applications pour bâtiments — Spécifications,2005-07-22,1,"['83.140.99','91.120.25']",ISO/TC 45/SC 4,9599,,[50396],['en'],63,"<p>ISO 22762 applies to elastomeric seismic isolators used to provide buildings or bridges with protection from earthquake damage. The isolators covered consist of alternate elastomer layers and reinforcing steel plates. They are placed between a superstructure and its substructure to provide both flexibility for decoupling structural systems from ground motion, and d

44514,IS,Cor,ISO 22762-3:2005/Cor 1:2006,Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications — Technical Corrigendum 1,Appareils d'appuis structuraux en élastomère pour protection sismique — Partie 3: Applications pour bâtiments — Spécifications — Rectificatif technique 1,2006-07-11,1,"['83.140.99','91.120.25']",ISO/TC 45/SC 4,9599,,[50396],['en'],2,

50396,IS,,ISO 22762-3:2010,Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications,Appareils d'appuis structuraux en élastomère pour protection sismique — Partie 3: Applications pour bâtiments — Spécifications,2010-10-21,2,"['83.140.99','91.120.25']",ISO/TC 45/SC 4,9599,"[36981,44514]",[70219],['en'],60,"<p>ISO 22762-3:2010 specifies minimum requirements and test methods for elastomeric seismic isolators used for buildings and the rubber material used in the manufacture of such isolators.</p><p>It is applicable to elastomeric seismic isolators used to provide buildings with protection from earthquake damage. The isolators covered consist of alternate el

70219,IS,,ISO 22762-3:2018,Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications,Appareils d'appuis structuraux en élastomère pour protection sismique — Partie 3: Applications pour bâtiments — Spécifications,2018-09-27,3,"['83.140.99','91.120.25']",ISO/TC 45/SC 4,9599,[50396],[89290],['en'],61,"<p>This document specifies minimum requirements and test methods for elastomeric seismic isolators used for buildings and the rubber material used in the manufacture of such isolators.</p><p>It is applicable to elastomeric seismic isolators used to provide buildings with protection from earthquake damage. The isolators covered consist of alternate elastomeric l

63947,IS,,ISO 22765:2016,"Nuclear fuel technology — Sintered (U,Pu)O2 pellets — Guidance for ceramographic preparation for microstructure examination","Technologie du combustible nucléaire — Pastilles (U,Pu)O2 frittées — Préconisations relatives à la préparation céramographique pour examen de la microstructure",2016-12-05,1,['27.120.30'],ISO/TC 85/SC 5,9599,,[86041],"['en','fr']",7,"<p>ISO 22765:2016 describes the ceramographic procedure used to prepare sintered (U,Pu)O₂ pellets for qualitative and quantitative examination of the pellet microstructure.</p><p>The examinations are performed before and after thermal treatment or chemical etching.</p><p>They allow</p><p>- observa

41135,IS,,ISO 22768:2006,"Rubber, raw — Determination of the glass transition temperature by differential scanning calorimetry (DSC)",Caoutchouc brut — Détermination de la température de transition vitreuse par analyse calorimétrique différentielle (DSC),2006-07-13,1,"['83.060','83.040.10']",ISO/TC 45/SC 3,9599,,[68070],"['en','fr']",5,<p>ISO 22768:2006 specifies a method using a differential scanning calorimeter to determine the glass transition temperature of raw rubber.</p>

68070,IS,,ISO 22768:2017,"Rubber, raw — Determination of the glass transition temperature by differential scanning calorimetry (DSC)",Caoutchouc brut — Détermination de la température de transition vitreuse par analyse calorimétrique différentielle (DSC),2017-08-03,2,"['83.060','83.040.10']",ISO/TC 45/SC 3,9599,[41135],[78332],['en'],9,<p>ISO 22768:2017 specifies a method using a differential scanning calorimeter to determine the glass transition temperature of raw rubber.</p>

41140,IS,,ISO 22769:2009,Oil of Australian sandalwood [Santalum spicatum (R.Br.) A.DC.],"Huile essentielle de bois de santal, type australien [Santalum spicatum (R.Br.) A.DC.]",2009-11-05,1,['71.100.60'],ISO/TC 54,9599,,[77269],"['en','fr']",9,"<p>ISO 22769:2009 specifies certain characteristics of the oil of Australian sandalwood [<i>Santalum spicatum </i>(R.Br.) A.DC.], with a view to facilitating the assessment of its quality.</p>"

4102,IS,,ISO 228-1:1982,"Pipe threads where pressure-tight joints are not made on the threads — Part 1: Designation, dimensions and tolerances","Filetages de tuyauterie pour raccordement sans étanchéité dans le filet — Partie 1: Désignation, dimensions et tolérances",1982-04-01,2,['21.040.30'],ISO/TC 5/SC 5,9599,,[20821],"['en','fr']",4,

20821,IS,,ISO 228-1:1994,"Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation","Filetages de tuyauterie pour raccordement sans étanchéité dans le filet — Partie 1: Dimensions, tolérances et désignation",1994-05-12,3,['21.040.30'],ISO/TC 5/SC 5,9599,[4102],[33777],"['en','fr']",5,

4103,IS,,ISO 228-2:1980,Pipe threads where pressure-tight joints are not made on the threads — Part 2: Verification by means of limit gauges,Filetages de tuyauterie pour raccordement sans étanchéité dans le filet — Partie 2: Vérification par calibres à limites,1980-09-01,1,['21.040.30'],ISO/TC 5/SC 5,9599,,[4104],['en'],13,

7099,IS,,ISO 2281:1984,Horology — Water-resistant watches,Horlogerie — Montres étanches,1984-07-01,2,['39.040.10'],ISO/TC 114/SC 3,9599,,[7100],"['en','fr']",3,

7100,IS,,ISO 2281:1990,Horology — Water-resistant watches,Horlogerie — Montres étanches,1990-04-05,3,['39.040.10'],ISO/TC 114/SC 3,9599,[7099],[45334],"['en','fr']",3,"<p>Specifies the designation, requirements, test methods and marking for such watches with or without an additional indication of an overpressure. Watertight means intended for ordinary daily use during exercises under water for a short period under conditions where water pressure and temperature vary. Does not apply to diver's watches (on this see ISO 6425).</p>"

35136,IS,,ISO 22825:2006,Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys,Essais non destructifs des assemblages soudés — Contrôle par ultrasons — Contrôle des soudures en aciers austénitiques et en alliages à base nickel,2006-06-28,1,['25.160.40'],ISO/TC 44/SC 5,9599,,[52927],"['en','fr']",14,"<p>ISO 22825:2006 specifies the approach to be followed when developing procedures for the ultrasonic testing of the following welds:</p><ul><li>welds in austenitic stainless steels;</li><li>welds in nickel-based alloys;</li><li>welds in duplex steels;</li><li>dissimilar metal welds.</li></ul><p>The purposes of the testing can be ver

52927,IS,,ISO 22825:2012,Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys,Contrôle non destructif des assemblages soudés — Contrôle par ultrasons — Contrôle des soudures en aciers austénitiques et en alliages à base nickel,2012-05-11,2,['25.160.40'],ISO/TC 44/SC 5,9599,[35136],[69428],"['en','fr']",22,

35152,IS,,ISO 22829:2007,Resistance welding — Transformer-rectifier for welding guns with integrated transformers — Transformer-rectifier units operating at 1000 Hz frequency,Soudage par résistance — Transformateurs-redresseurs pour pinces de soudage à transformateur incorporé — Transformateurs-redresseurs alimentés sous une fréquence de 1000 Hz,2007-02-09,1,"['29.180','25.160.30']",ISO/TC 44/SC 6,9599,,[64831],"['en','fr']",26,"<p>ISO 22829:2007 is applicable to transformer-rectifier units as used in electric resistance welding machines operating from a power supply with a frequency of 1 000 Hz, and of a rated value of the input voltage equal to or higher than 500 V. These transformer-recti

7101,IS,,ISO 2283:1972,Long shank machine taps with nominal diameters from 3 to 24 mm and 1/8 to 1 in,"Tarauds à machine, à queue longue, de diamètre nominal 3 à 24 mm et 1/8 à 1 in",1972-06-01,1,['25.100.50'],ISO/TC 29,9599,,[30051],"['en','fr']",4,

7102,IS,Amd,ISO 2283:1972/Amd 1:1977,Long shank machine taps with nominal diameters from 3 to 24 mm and 1/8 to 1 in — Amendment 1,"Tarauds à machine, à queue longue, de diamètre nominal 3 à 24 mm et 1/8 à 1 in — Amendement 1",1977-09-01,1,['25.100.50'],ISO/TC 29,9599,,[30051],"['en','fr']",2,

7103,IS,,ISO 2284:1976,Hand taps for pipe threads for parallel and taper threads — General dimensions and marking,Tarauds à main au pas du gaz pour filetages cylindrique et conique — Dimensions générales et marquage,1976-06-01,2,['25.100.50'],ISO/TC 29,9599,,[7104],"['en','fr']",2,

7104,IS,,ISO 2284:1987,Hand taps for parallel and taper pipe threads — General dimensions and marking,Tarauds à main pour filetages cylindrique et conique de tuyauterie — Dimensions générales et marquage,1987-12-03,3,['25.100.50'],ISO/TC 29/SC 9,9599,[7103],[69197],"['en','fr']",3,

7105,IS,,ISO 2285:1981,"Rubber, vulcanized — Determination of tension set at normal and high temperatures",Caoutchouc vulcanisé — Détermination de la déformation rémanente aux températures normale et élevée,1981-12-01,2,['83.060'],ISO/TC 45,9599,,[7106],"['en','fr']",3,

7106,IS,,ISO 2285:1988,"Rubber, vulcanized or thermoplastic — Determination of tension set at normal and high temperatures",Caoutchouc vulcanisé ou thermoplastique — Détermination de la déformation rémanente aux températures normale et élevée,1988-09-22,3,['83.060'],ISO/TC 45/SC 2,9599,[7105],[23839],"['en','fr']",4,

23839,IS,,ISO 2285:1997,"Rubber, vulcanized or thermoplastic — Determination of tension set at normal and high temperatures",Caoutchouc vulcanisé ou thermoplastique — Détermination de la déformation rémanente après allongement aux températures normales et élevées,1997-06-05,4,['83.060'],ISO/TC 45/SC 2,9599,[7106],[33673],"['en','fr']",6,

33673,IS,,ISO 2285:2001,"Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load","Caoutchouc vulcanisé ou thermoplastique — Détermination de la déformation rémanente sous allongement constant de traction et de la déformation rémanente, de l'allongement et du fluage sous charge constante de traction",2001-12-20,5,['83.060'],ISO/TC 45/SC 2,9599,"[23839,20925]",[45387],"['en','fr']",10,

45387,IS,,ISO 2285:2007,"Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load","Caoutchouc vulcanisé ou thermoplastique — Détermination de la déformation rémanente sous allongement constant et de la déformation rémanente, de l'allongement et du fluage sous charge constante de traction",2007-07-10,6,['83.060'],ISO/TC 45/SC 2,9599,[33673],[57737],"['en','fr']",10,"<p>ISO 2285:2007 specifies a number of methods of determining the dimensional changes in test pieces of vulcanized or thermoplastic rubber during and after tensile loading for relatively short periods under constant elongatio

57737,IS,,ISO 2285:2013,"Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load","Caoutchouc vulcanisé ou thermoplastique — Détermination de la déformation rémanente sous allongement constant et de la déformation rémanente, de l'allongement et du fluage sous charge constante de traction",2013-01-03,7,['83.060'],ISO/TC 45/SC 2,9599,[45387],[77425],"['en','fr','ru']",13,"<p>ISO 2285:2013 specifies a number of methods of determining the dimensional changes in test pieces of vulcanized or thermoplastic rubber during and after tensile loading for relatively short periods under constant elon

41180,IS,,ISO 22854:2008,Liquid petroleum products — Determination of hydrocarbon types and oxygenates in automotive-motor gasoline — Multidimensional gas chromatography method,Produits pétroliers liquides — Détermination des groupes d'hydrocarbures et de la teneur en composés oxygénés de l'essence automobile pour moteurs — Méthode par chromatographie multidimensionnelle en phase gazeuse,2008-09-30,1,['75.080'],ISO/TC 28,9599,,[60099],"['en','fr']",17,"<p>ISO 22854:2008 specifies the gas chromatographic (GC) method for the determination of saturated, olefinic and aromatic hydrocarbons in automotive motor gasoline. Additionally, the benzene content, oxygenate compounds and the total oxygenate

60099,IS,,ISO 22854:2014,Liquid petroleum products — Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel — Multidimensional gas chromatography method,Produits pétroliers liquides — Détermination des groupes d'hydrocarbures et de la teneur en composés oxygénés de l'essence automobile pour moteurs et du carburant à l'éthanol (E85) — Méthode par chromatographie multidimensionnelle en phase gazeuse,2014-02-21,2,['75.080'],ISO/TC 28,9599,[41180],[68966],"['en','fr']",20,"<p>ISO 22854:2014 specifies the gas chromatographic (GC) method for the determination of saturated, olefinic and aromatic hydrocarbons in automotive motor gasoline a

68966,IS,,ISO 22854:2016,Liquid petroleum products — Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel — Multidimensional gas chromatography method,Produits pétroliers liquides — Détermination des groupes d'hydrocarbures et des composés oxygénés de l'essence pour moteurs automobiles et du carburant pour automobiles éthanol (E85) — Méthode par chromatographie multidimensionelle en phase gazeuse,2016-03-09,3,['75.080'],ISO/TC 28,9599,[60099],[78904],"['en','fr']",19,"<p>ISO 22854:2016 specifies the gas chromatographic (GC) method for the determination of saturated, olefinic and aromatic hydrocarbons in automotive motor gasoline

78904,IS,,ISO 22854:2021,Liquid petroleum products — Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel — Multidimensional gas chromatography method,Produits pétroliers liquides — Détermination des groupes d'hydrocarbures et de la teneur en composés oxygénés de l'essence pour moteurs automobiles et du carburant éthanol pour automobiles E85 — Méthode par chromatographie multidimensionnelle en phase gazeuse,2021-07-21,4,['75.080'],ISO/TC 28,9599,[68966],[85699],"['en','fr']",21,"<p>This document specifies the gas chromatographic (GC) method for the determination of saturated, olefinic and aromatic hydrocarbons in automotive motor

36522,IS,,ISO 22857:2004,Health informatics — Guidelines on data protection to facilitate trans-border flows of personal health information,Informatique de santé — Lignes directrices sur la protection des données pour faciliter les flux d'information sur la santé du personnel de part et d'autre des frontières,2004-03-17,1,['35.240.80'],ISO/TC 215,9599,,[52955],['en'],60,"<p>ISO 22857:2004 provides guidance on data protection requirements to facilitate the transfer of personal health data across national borders. It does not require the harmonization of existing national standards, legislation or regulations. It is normative only in respect of international exchange of personal health data. H

20149,IS,,ISO 2286-1:1998,"Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Methods for determination of length, width and net mass","Supports textiles revêtus de caoutchouc ou de plastique — Détermination des caractéristiques des rouleaux — Partie 1: Méthodes de détermination de la longueur, de la largeur et de la masse nette",1998-06-04,1,['59.080.40'],ISO/TC 45/SC 4,9599,[7108],[65589],"['en','fr']",2,

7107,IS,,ISO 2286:1972,Fabrics coated with rubber or plastics — Determination of roll characteristics,Supports textiles revêtus d'élastomères ou de plastiques — Détermination des caractéristiques des rouleaux,1972-10-01,1,['59.080.40'],ISO/TC 45,9599,,[7108],"['en','fr']",3,

7108,IS,,ISO 2286:1986,Rubber- or plastics-coated fabrics — Determination of roll characteristics,Supports textiles revêtus de caoutchouc ou de plastique — Détermination des caractéristiques des rouleaux,1986-11-13,2,['59.080.40'],ISO/TC 45,9599,[7107],"[20149,25482,25483]","['en','fr']",4,

25482,IS,,ISO 2286-2:1998,"Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate","Supports textiles revêtus de caoutchouc ou de plastique — Détermination des caractéristiques des rouleaux — Partie 2: Méthodes de détermination de la masse surfacique totale, de la masse surfacique du revêtement et de la masse surfacique du support",1998-06-03,1,['59.080.40'],ISO/TC 45/SC 4,9599,[7108],[65590],"['en','fr']",6,

25483,IS,,ISO 2286-3:1998,Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for determination of thickness,Supports textiles revêtus de caoutchouc ou de plastique — Détermination des caractéristiques des rouleaux — Partie 3: Méthode de détermination de l'épaisseur,1998-05-28,1,['59.080.40'],ISO/TC 45/SC 4,9599,[7108],[65591],"['en','fr']",3,

35166,IS,,ISO 22867:2004,Forestry machinery — Vibration test code for portable hand-held machines with internal combustion engine — Vibration at the handles,Machines forestières — Code d'essai des vibrations pour machines portatives tenues à la main à moteur à combustion interne — Vibrations au niveau des poignées,2004-12-08,1,['65.060.80'],ISO/TC 23/SC 17,9599,"[14879,14268]",[51143],"['en','fr']",18,"<p>ISO 22867:2004 specifies a vibration test code for determining, efficiently and under standardized conditions, the magnitude of vibration at the handles of portable hand-held, internal-combustion-engine-powered forestry machines such as chain-saws, brush-cutters and grass-trimmers. The co

44261,IS,Cor,ISO 22867:2004/Cor 1:2006,Forestry machinery — Vibration test code for portable hand-held machines with internal combustion engine — Vibration at the handles — Technical Corrigendum 1,Machines forestières — Code d'essai des vibrations pour machines portatives tenues à la main à moteur à combustion interne — Vibrations au niveau des poignées — Rectificatif technique 1,2006-06-14,1,['65.060.80'],ISO/TC 23/SC 17,9599,,[51143],"['en','fr']",2,

51143,IS,,ISO 22867:2011,Forestry and gardening machinery — Vibration test code for portable hand-held machines with internal combustion engine — Vibration at the handles,Machines forestières et machines de jardin — Code d'essai des vibrations pour machines portatives tenues à la main à moteur à combustion interne — Vibrations au niveau des poignées,2011-12-07,2,"['65.060.80','13.160']",ISO/TC 23/SC 17,9599,"[44261,35166]",[75691],"['en','fr']",28,"<p>ISO 22867:2011 specifies a vibration test code for determining, efficiently and under standardized conditions, the magnitude of vibration at the handles of portable hand-held, internal-combustion-engine-powered forest and garden machinery inc

35167,IS,,ISO 22868:2005,Forestry machinery — Noise test code for portable hand-held machines with internal combustion engine — Engineering method (Grade 2 accuracy),Machines forestières — Code d'essai acoustique pour machines portatives tenues à la main à moteur à combustion interne — Méthode d'expertise (classe de précision 2),2005-02-04,1,"['65.060.80','13.140','17.140.20']",ISO/TC 23/SC 17,9599,"[14880,16834,18896,13797]",[51129],"['en','fr']",23,"<p>ISO 22868:2005 specifies a noise test code for determining, efficiently and under standardized conditions, the noise emission characteristics of portable, hand-held, combustion-engine-powered forest machines such as chain-saws, brush cutters

51129,IS,,ISO 22868:2011,Forestry and gardening machinery — Noise test code for portable hand-held machines with internal combustion engine — Engineering method (Grade 2 accuracy),Machines forestières et machines de jardin — Code d'essai acoustique pour machines portatives tenues à la main à moteur à combustion interne — Méthode d'expertise (classe de précision 2),2011-02-23,2,"['65.060.80','13.140','17.140.20']",ISO/TC 23/SC 17,9599,[35167],[72397],"['en','fr']",35,"<p>ISO 22868:2011 specifies a noise test code for determining, efficiently and under standardized conditions, the noise emission characteristics of portable, hand‑held, combustion‑engine‑powered forestry and garden machines, inc

35173,IS,,ISO 22870:2006,Point-of-care testing (POCT) — Requirements for quality and competence,Analyses de biologie délocalisées (ADBD) — Exigences concernant la qualité et la compétence,2006-02-03,1,"['03.120.10','11.100.01']",ISO/TC 212,9599,,[71119],"['en','fr','ru']",11,"<p>ISO 22870:2006 gives specific requirements applicable to point-of-care testing and is intended to be used in conjunction with ISO 15189. The requirements of ISO 22870:2006 apply when POCT is carried out in hospital, clinic and by a healthcare organization providing ambulatory care. It can be applied to transcutaneous measurements, the analysis of expired air, and <i>in vivo</i> monitoring of physiological parameters.

71119,IS,,ISO 22870:2016,Point-of-care testing (POCT) — Requirements for quality and competence,Examens de biologie médicale délocalisée (EBMD) — Exigences concernant la qualité et la compétence,2016-10-26,2,"['03.120.10','11.100.01']",ISO/TC 212,9599,[35173],[76677],"['en','fr']",11,"<p>ISO 22870:2016 gives specific requirements applicable to point-of-care testing and is intended to be used in conjunction with ISO 15189. The requirements of this document apply when POCT is carried out in a hospital, clinic and by a healthcare organization providing ambulatory care. This document can be applied to transcutaneous measurements, the analysis of expired air, and <i>in vivo</i> monitoring of phys

41196,IS,,ISO 22875:2008,Nuclear energy — Determination of chlorine and fluorine in uranium dioxide powder and sintered pellets,Énergie nucléaire — Détermination du chlore et du fluor dans les poudres de dioxyde d'uranium et les pastilles frittées,2008-01-07,1,['27.120.30'],ISO/TC 85/SC 5,9599,,[69085],"['en','fr']",10,<p>ISO 22875:2008 describes a method for determining chlorine and fluorine in uranium dioxide powder and sintered pellets. It is applicable for the analysis of samples with from 5 µg to 500 µg of chlorine per gram sample and with 2 µg to 500 µg of fluorine per gram sample.</p>

36538,IS,,ISO 22879:2004,Castors and wheels — Requirements for castors for furniture,Roues et roulettes — Exigences pour roulettes pour meubles,2004-04-28,1,['97.140'],ISO/TC 110,9599,,[68236],"['en','fr']",12,"<p>ISO 22878:2004 specifies the technical requirements, the appropriate dimensions and the requirements for testing for castors for furniture.</p><p>It is applicable to castors for general furniture applications, but specifically excludes those for swivel chairs and other specialized applications.</p>"

7109,IS,,ISO 2288:1979,Agricultural tractors and machines — Engine test code (bench test) — Net power,Tracteurs et machines agricoles — Code d'essai des moteurs (essai au banc) — Puissance nette,1979-02-01,1,['65.060.01'],ISO/TC 23/SC 2,9599,,[7110],"['en','fr']",15,

7111,IS,Amd,ISO 2288:1979/Amd 1:1983,Agricultural tractors and machines — Engine test code (bench test) — Net power — Amendment 1,Tracteurs et machines agricoles — Code d'essai des moteurs (essai au banc) — Puissance nette — Amendement 1,1983-11-01,1,['65.060.01'],ISO/TC 23/SC 2,9599,,[7110],['en'],3,

7110,IS,,ISO 2288:1989,Agricultural tractors and machines — Engine test code (bench test) — Net power,Tracteurs et machines agricoles — Code d'essai des moteurs (essai au banc) — Puissance nette,1989-12-07,2,['65.060.01'],ISO/TC 23/SC 2,9599,"[7109,7111]",[25396],"['en','fr']",17,

36539,IS,,ISO 22880:2004,Castors and wheels — Requirements for castors for swivel chairs,Roues et roulettes — Exigences pour roulettes pour sièges de bureaux,2004-04-28,1,['97.140'],ISO/TC 110,9599,,[68237],"['en','fr']",12,"<p>ISO 22880:2004 specifies the technical requirements, the appropriate dimensions and the requirements for testing of castors, with or without braking devices, that will normally be used on swivel chairs.</p>"

36541,IS,,ISO 22882:2004,Castors and wheels — Requirements for castors for hospital beds,Roues et roulettes — Exigences pour roulettes pour lits d'hôpitaux,2004-04-27,1,['11.140'],ISO/TC 110,9599,,[68238],"['en','fr']",12,"<p>ISO 22882:2004 specifies the technical requirements, the appropriate dimensions and the requirements for testing of swivel castors for hospital beds with a wheel diameter of 100 mm or more, and which have a central locking device. Swivel castors may be used with the main principal dimensions.</p>"

35182,IS,,ISO 22889:2007,Metallic materials — Method of test for the determination of resistance to stable crack extension using specimens of low constraint,Matériaux métalliques — Méthode d'essai pour la détermination de la résistance à la propagation stable de fissures au moyen d'éprouvettes à faible taux de triaxialité des contraintes,2007-12-14,1,['77.040.10'],ISO/TC 164/SC 4,9599,,[60890],['en'],49,"<p>ISO 22889:2007 specifies methods for determining the resistance to stable crack extension in terms of crack opening displacement and critical crack tip opening angle for homogeneous metallic materials by the quasistatic loading of cracked specimens that exhibit low constraint to plastic d

35197,IS,,ISO 22891:2007,Paper — Determination of transmittance by diffuse reflectance measurement,Papier — Détermination de la transmittance par le mesurage de la réflectance diffuse,2007-06-25,1,['85.060'],ISO/TC 6,9599,,[60965],"['en','fr','ru']",9,"<p>ISO 22891:2007 specifies a method for the calculation of transmittance based upon diffuse reflectance measurements.</p><p>The use of the method is restricted to white and near-white translucent papers. If it is necessary to determine the transmittance of papers which contain fluorescent whitening agents, the fluorescence emission is eliminated using the prescribed UV cut-off filter.</p>"

36546,IS,,ISO 22897:2003,Glass in building — Glazing and airborne sound insulation — Product descriptions and determination of properties,Verre dans la construction — Vitrages et isolation aux bruits aériens — Description des produits et détermination des propriétés,2003-08-11,1,['81.040.20'],ISO/TC 160,9599,,"[75040,84945]","['en','fr']",7,"<p>ISO 22897:2003 assigns sound insulation values to all transparent, translucent and opaque glass products that are intended to be used in glazed assemblies in buildings, and which exhibit properties of acoustic protection, either as a prime intention or as a supplementary characteristic.</p><p>It outlines the procedure by which glass products can be ra

39750,IS,,ISO 22899-1:2007,Determination of the resistance to jet fires of passive fire protection materials — Part 1: General requirements,Détermination de la résistance aux feux propulsés des matériaux de protection passive contre l'incendie — Partie 1: Exigences générales,2007-11-26,1,['13.220.50'],ISO/TC 92/SC 2,9599,,[76682],['en'],40,<p>ISO 22899-1:2007 describes a method of determining the resistance to jet fires of passive fire protection materials and systems. It gives an indication of how passive fire protection materials behave in a jet fire and provides performance data under the specified conditions.</p>

41276,IS,,ISO 22900-2:2009,Road vehicles — Modular vehicle communication interface (MVCI) — Part 2: Diagnostic protocol data unit application programming interface (D-PDU API),Véhicules routiers — Interface de communication modulaire du véhicule (MVCI) — Partie 2: Interface de programmation d'application d'unité de données du protocole de diagnostic (D-PDU API),2009-01-27,1,['43.040.15'],ISO/TC 22/SC 31,9599,,[62490],['en'],325,"<p>ISO 22900-2:2009 specifies the diagnostic protocol data unit application programming interface (D-PDU API) as a modular vehicle communication interface (MVCI) protocol module software interface and common basis for diagnostic and reprogramming software application

62490,IS,,ISO 22900-2:2017,Road vehicles — Modular vehicle communication interface (MVCI) — Part 2: Diagnostic protocol data unit (D-PDU API),Véhicules routiers — Interface de communication modulaire du véhicule (MVCI) — Partie 2: Interface de programmation d'application d'unité de données du protocole de diagnostic (D-PDU API),2017-07-25,2,['43.040.15'],ISO/TC 22/SC 31,9599,[41276],[78387],['en'],362,"<p>ISO 22900-2:2017 specifies the diagnostic protocol data unit application programming interface (D-PDU API) as a modular vehicle communication interface (MVCI) protocol module software interface and common basis for diagnostic and reprogramming software applications.</p><p>ISO 22900-2:2017 c

50559,IS,,ISO 22900-3:2009,Road vehicles — Modular vehicle communication interface (MVCI) — Part 3: Diagnostic server application programming interface (D-Server API),Véhicules routiers — Interface de communication modulaire du véhicule (MVCI) — Partie 3: Interface pour la programmation des applications du serveur de diagnostic (D-Server API),2009-06-11,1,['43.040.15'],ISO/TC 22,9599,,[56615],['en'],448,"<p>ISO 22900-3:2009 defines an object-oriented programming interface, the objective of which is to be able to implement server applications used during the design, production and maintenance phase of a vehicle communication system which are compatible with each other and therefore exchangea

7114,IS,,ISO 2291:1980,Cocoa beans — Determination of moisture content (Routine method),Fèves de cacao — Détermination de la teneur en eau (Méthode pratique),1980-12-01,2,['67.140.30'],ISO/TC 34/SC 18,9599,,"[7115,68202]","['en','fr']",2,"<p>The principle of the method consists in drying of the product for 16 h in a ventilated oven controlled at 103 °C, after previous crushing.</p>"

41210,IS,,ISO 22915-1:2008,Industrial trucks — Verification of stability — Part 1: General,Chariots de manutention — Vérification de la stabilité — Partie 1: Généralités,2008-10-13,1,['53.060'],ISO/TC 110/SC 2,9599,,[63068],"['en','fr']",8,"<p>ISO 22915 deals with the safety of industrial trucks, as defined in ISO 5053, relative to their stability and the verification of that stability. For the purposes of ISO 22915, industrial trucks are wheeled, self-propelled or pedestrian-propelled vehicles, excepting those running on rails. They are either operator-controlled or driverless and designed to carry, tow, push, lift, stack or tier in racks.</p><p>ISO 22915-1:2008 specifies basic test criteri

63068,IS,,ISO 22915-1:2016,Industrial trucks — Verification of stability — Part 1: General,Chariots de manutention — Vérification de la stabilité — Partie 1: Généralités,2016-01-15,2,['53.060'],ISO/TC 110/SC 2,9599,[41210],[85873],"['en','fr']",8,"<p>ISO 22915-1:2016 series deals with the safety of industrial trucks, as defined in ISO 5053‑1, relative to their stability and the verification of that stability. For the purposes of ISO 22915, industrial trucks are wheeled, self-propelled, or pedestrian-propelled vehicles excepting those running on rails. They are either operator-controlled or driverless, and are designed to carry, tow, push, lift, stack or tier in racks.</p><p>ISO 22915-1:2016

42349,IS,,ISO 22915-10:2008,Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices,Chariots de manutention — Vérification de la stabilité — Partie 10: Essai de stabilité supplémentaire pour les chariots travaillant dans des conditions de gerbage spéciales avec la charge décentrée latéralement par des dispositifs à moteur,2008-06-10,1,['53.060'],ISO/TC 110/SC 2,9599,[1310],"[80482,76879]","['en','fr']",3,"<p>ISO 22915 deals with the safety of industrial trucks, as defined in ISO 5053, relative to their stability and the verification of that stability. For the

54418,IS,,ISO 22915-13:2012,Industrial trucks — Verification of stability — Part 13: Rough-terrain trucks with mast,Chariots de manutention — Vérification de la stabilité — Partie 13: Chariots tout-terrain à mât,2012-02-14,1,['53.060'],ISO/TC 110/SC 4,9599,"[34595,15544]","[77137,74402]","['en','fr']",6,"<p>This part of ISO 22915 specifies the tests for verifying the stability of rough-terrain counterbalanced trucks with mast, equipped with fork arms or with load handling attachments with a rated load up to and including 10 000 kg. It is not applicable to those trucks designed for handling freight containers.</p>"

65065,IS,Cor,ISO 22915-13:2012/Cor 1:2013,Industrial trucks — Verification of stability — Part 13: Rough-terrain trucks with mast — Technical Corrigendum 1,Chariots de manutention — Vérification de la stabilité — Partie 13: Chariots tout-terrain à mât — Rectificatif technique 1,2013-10-16,1,['53.060'],ISO/TC 110/SC 4,9599,,"[77137,74402]","['en','fr']",2,

59942,IS,,ISO 22915-15:2013,Industrial trucks — Verification of stability — Part 15: Counterbalanced trucks with articulated steering,Chariots de manutention — Vérification de la stabilité — Partie 15: Chariots avec dispositif de direction articulé travaillant en porte-à-faux,2013-05-08,1,['53.060'],ISO/TC 110/SC 2,9599,,[76880],"['en','fr']",6,"<p>ISO 22915-15:2013 specifies the tests for verifying the stability of counterbalanced fork-lift trucks with articulating steering and with mast, equipped with fork arms or load-handling attachments.</p><p>It is not applicable to trucks with retractable devices such as a retractable mast or fork.</p>"

59943,IS,,ISO 22915-16:2014,Industrial trucks — Verification of stability — Part 16: Pedestrian-propelled trucks,Chariots de manutention — Vérification de la stabilité — Partie 16: Chariots à conducteur à propulsion manuelle,2014-07-11,1,['53.060'],ISO/TC 110/SC 2,9599,,[83334],"['en','fr']",9,"<p>ISO 22915-16:2014 specifies tests for verifying the stability of pedestrian-propelled trucks.</p><p>It is applicable to straddle, pallet and platform stacker trucks with capacities not exceeding 1 000kg, with manual or battery-powered lift, scissors lift pallet trucks with lift heights up to 1 000 mm and rated capacity up to 1 000kg, with manual or battery-powered lift, and platform trucks. It also

41211,IS,,ISO 22915-2:2008,Industrial trucks — Verification of stability — Part 2: Counterbalanced trucks with mast,Chariots de manutention — Vérification de la stabilité — Partie 2: Chariots travaillant en porte-à-faux à mât,2008-09-01,1,['53.060'],ISO/TC 110/SC 2,9599,[5570],[75012],"['en','fr']",6,"<p>ISO 22915-2:2008 specifies the tests for verifying the stability of counterbalanced trucks with masts, equipped with fork arms or with load handling attachments. It is not applicable to those trucks designed for handling freight containers, dealt with in ISO 22915-9.</p>"

42350,IS,,ISO 22915-20:2008,"Industrial trucks — Verification of stability — Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization","Chariots de manutention — Vérification de la stabilité — Partie 20: Essai de stabilité supplémentaire pour les chariots travaillant dans des conditions de gerbage spéciales avec une charge déportée, déport par utilisation",2008-06-10,1,['53.060'],ISO/TC 110/SC 2,9599,,"[76881,80486]","['en','fr']",4,"<p>ISO 22915 deals with the safety of industrial trucks, as defined in ISO 5053, relative to their stability and the verification of that stability. For the purposes of ISO 22915, industrial trucks ar

35103,IS,,ISO 22915-21:2009,Industrial trucks — Verification of stability — Part 21: Order-picking trucks with operator position elevating above 1 200 mm,Chariots de manutention — Vérification de la stabilité — Partie 21: Chariots préparateurs de commandes avec un poste de l'opérateur élevable au-dessus de 1 200 mm,2009-08-04,1,['53.060'],ISO/TC 110/SC 2,9599,,[70780],"['en','fr']",7,"<p>ISO 22915-21:2009 specifies the tests for verifying the stability of order‑picking trucks with an elevating operator position, as defined in ISO 5053, where the operator's position can be raised to an elevation above 1 200 mm. It is applicable to industrial trucks fitted with fork arms, platforms and/or inte

41212,IS,,ISO 22915-3:2008,Industrial trucks — Verification of stability — Part 3: Reach and straddle trucks,Chariots de manutention — Vérification de la stabilité — Partie 3: Chariot à mât ou à fourche rétractable,2008-09-02,1,['53.060'],ISO/TC 110/SC 2,9599,"[33238,8375]",[63069],"['en','fr']",8,"<p>ISO 22915-3:2008 specifies the tests for verifying the stability of reach trucks (with retractable mast or fork) and straddle trucks, equipped with tilting or non‑tilting masts or fork arms and having a rated capacity up to and including 5 000 kg.</p><p>It is also applicable to such trucks operating under the same conditions when equipped with load-handling attachments.</p>"

63069,IS,,ISO 22915-3:2014,Industrial trucks — Verification of stability — Part 3: Reach and straddle trucks,Chariots de manutention — Vérification de la stabilité — Partie 3: Chariots à mât ou à fourche rétractable,2014-06-16,2,['53.060'],ISO/TC 110/SC 2,9599,[41212],[80276],"['en','fr']",7,"<p>ISO 22915-3:2014 specifies the tests for verifying the stability of reach trucks (with retractable mast or fork) and straddle trucks, equipped with tilting or non-tilting masts or fork arms and having a rated capacity up to and including 5 000 kg.</p><p>It is also applicable to such trucks operating under the same conditions when equipped with load-handling attachments.</p>"

41213,IS,,ISO 22915-4:2009,"Industrial trucks — Verification of stability — Part 4: Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height","Chariots de manutention — Vérification de la stabilité — Partie 4: Chariots à fourche recouvrante, chariots préparateurs de commandes avec un poste de l'opérateur ayant une hauteur de levée inférieure ou égale à 1 200 mm et chariots à double fourche",2009-11-24,1,['53.060'],ISO/TC 110/SC 2,9599,[11896],[70779],"['en','fr']",8,"<p>ISO 22915-4:2009 specifies tests for verifying the stability of pallet stackers, double stackers, and order-picking trucks with an elevating operator

62677,IS,Amd,ISO 22915-4:2009/Amd 1:2013,"Industrial trucks — Verification of stability — Part 4: Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height — Amendment 1","Chariots de manutention — Vérification de la stabilité — Partie 4: Chariots à fourche recouvrante, chariots préparateurs de commandes avec un poste de l'opérateur ayant une hauteur de levée inférieure ou égale à 1 200 mm et chariots à double fourche — Amendement 1",2013-04-05,1,['53.060'],ISO/TC 110/SC 2,9599,,[70779],"['en','fr']",1,

60406,IS,,ISO 22915-5:2014,Industrial trucks — Verification of stability — Part 5: Single-side-loading trucks,Chariots de manutention — Vérification de la stabilité — Partie 5: Chariots à chargement latéral,2014-06-23,1,['53.060'],ISO/TC 110/SC 2,9599,[22277],[80674],"['en','fr']",9,<p>ISO 22915-5:2014 specifies the tests to verify the stability of single-side-loading trucks with tiltable or non-tiltable mast or fork arms. It is applicable to trucks fitted with fork arms and/or attachments.</p>

42347,IS,,ISO 22915-7:2009,Industrial trucks — Verification of stability — Part 7: Bidirectional and multidirectional trucks,Chariots de manutention — Vérification de la stabilité — Partie 7: Chariots bidirectionnels et multidirectionnels,2009-08-06,1,['53.060'],ISO/TC 110/SC 2,9599,,[70571],"['en','fr']",14,<p>ISO 22915-7:2009 specifies the tests for verifying the stability of bidirectional and multidirectional trucks with tilting or non‑tilting mast or fork arms. It is also applicable to trucks operating under the same conditions when equipped with load-handling attachments.</p>

42348,IS,,ISO 22915-8:2008,Industrial trucks — Verification of stability — Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated,Chariots de manutention — Vérification de la stabilité — Partie 8: Essai de stabilité supplémentaire pour les chariots travaillant dans des conditions de gerbage spéciales avec le mât incliné en avant et la charge surélevée,2008-06-10,1,['53.060'],ISO/TC 110/SC 2,9599,"[30914,11898]",[75011],"['en','fr']",3,"<p>ISO 22915 deals with the safety of industrial trucks, as defined in ISO 5053, relative to their stability and the verification of that stability. For the purposes of ISO 22915,

75011,IS,,ISO 22915-8:2018,Industrial trucks — Verification of stability — Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated,Chariots de manutention — Vérification de la stabilité — Partie 8: Essai de stabilité supplémentaire pour les chariots travaillant dans des conditions de gerbage spéciales avec le mât incliné en avant et la charge élevée,2018-09-19,2,['53.060'],ISO/TC 110/SC 2,9599,[42348],[89046],"['en','fr']",4,"<p>The ISO 22915 series deals with the safety of industrial trucks, as defined in ISO 5053-1, relative to their stability and the verification of that stability. For the purposes of the ISO 2

36554,IS,,ISO 22917:2004,Superabrasives — Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride,Superabrasifs — Ecarts limites et tolérances de battement pour les meules à base de diamant et de nitrure de bore,2004-12-03,1,['25.100.70'],ISO/TC 29/SC 5,9599,,[64774],"['en','fr']",18,"<p>ISO 22917:2004 applies to all rotating grinding tools with diamond or cubic boron nitride with metal, vitrified or resinoid bonded cores, and circular bores for mounting the grinding tool on a clamping flange as well as to grinding points with cylindrical spindle for mounting in collets. It contains the significant limit deviations and run-out tolerances of these grind

7116,IS,,ISO 2292:1973,Cocoa beans — Sampling,Fèves de cacao — Échantillonnage,1973-02-01,1,['67.140.30'],ISO/TC 34/SC 18,9599,,"[68203,7117]","['en','fr']",5,

7118,IS,,ISO 2293:1976,Meat and meat products — Aerobic count at 30 degrees C (Reference method),Viandes et produits à base de viande — Dénombrement des germes aérobies à 30 degrés C (Méthode de référence),1976-04-01,1,['07.100.30'],ISO/TC 34/SC 6,9599,,[7119],"['en','fr']",3,

79899,IS,,ISO 22932-5:2023,Mining — Vocabulary — Part 5: Drilling and blasting,Exploitation minière — Vocabulaire — Partie 5: Forage et abattage à l'explosif,2023-06-08,1,"['01.040.73','73.020']",ISO/TC 82,9599,,[89257],['en'],51,<p class='MsoBodyText'><span lang='EN-GB'>This document specifies the drilling and blasting terms commonly used in mining. Only those terms that have a specific meaning in this field are included.</span></p>

41216,IS,,ISO 22935-1:2009,"Milk and milk products — Sensory analysis — Part 1: General guidance for the recruitment, selection, training and monitoring of assessors","Lait et produits laitiers — Analyse sensorielle — Partie 1: Lignes directrices générales pour le recrutement, la sélection, l'entraînement et le contrôle des sujets",2009-04-17,1,"['03.100.30','67.100.01']",ISO/TC 34/SC 5,9599,,[84531],"['en','fr','ru']",19,"<p>ISO 22935-1¦IDF 99-1:2009 gives general guidance for the recruitment, selection, training, and monitoring of assessors for sensory analysis of milk and milk products.</p><p>It specifies criteria for the selection, and procedures for the training and monitoring, of selec

41217,IS,,ISO 22935-2:2009,Milk and milk products — Sensory analysis — Part 2: Recommended methods for sensory evaluation,Lait et produits laitiers — Analyse sensorielle — Partie 2: Méthodes recommandées pour l'évaluation sensorielle,2009-04-17,1,['67.100.01'],ISO/TC 34/SC 5,9599,,[84532],"['en','fr','ru']",23,<p>ISO 22935-2|IDF 99-2:2009 specifies recommended methods for the sensory evaluation of specific milk and milk products. It specifies criteria for the sampling and preparation of samples and the assessment of the samples.</p><p>ISO 22935-2|IDF 99-2:2009 is suitable for application in conjunction with the sensory methodologies outlined in ISO 22935-1|IDF 99-1 and other ISO or IDF senso

41218,IS,,ISO 22935-3:2009,Milk and milk products — Sensory analysis — Part 3: Guidance on a method for evaluation of compliance with product specifications for sensory properties by scoring,Lait et produits laitiers — Analyse sensorielle — Partie 3: Lignes directrices pour une méthode d'évaluation de la conformité aux spécifications de produit pour les propriétés sensorielles par notation,2009-04-17,1,['67.100.01'],ISO/TC 34/SC 5,9599,,[84533],"['en','fr','ru']",7,<p>ISO 22935-3¦IDF 99-3:2009 gives guidance on a general method for evaluation of compliance with product specifications for sensory properties based on sensory scoring and the use of a common nomenclature of terms.</p><p>The meth

36561,IS,,ISO 22938:2008,Document management — Electronic content/document management (CDM) data interchange format,Gestion de documents — Format d'échange de données pour la gestion de documents/du contenu électronique,2008-11-24,1,['37.080'],ISO/TC 171/SC 2,9599,,[62880],['en'],11,<p>ISO 22938 defines the interchange of content/document management (CDM) data and all associated resources. </p>

7120,IS,,ISO 2294:1974,Meat and meat products — Determination of total phosphorus content (Reference method),Viandes et produits à base de viande — Détermination de la teneur en phosphore (Méthode de référence),1974-04-01,1,['67.120.10'],ISO/TC 34/SC 6,9599,,[76935],"['en','fr']",3,"<p>The method consists in mineralizing of a test portion with sulphuric and nitrit acids, precipitating of the phosphorus as quinoline phosphomolybdate, drying and weighing of the precipitate. An alternative method of mineralizing is described in clause 10.</p>"