Withdrawn and superseded ISO standards — page 79 of 246

34888,IS,,ISO 22090-3:2004,Ships and marine technology — Transmitting heading devices (THDs) — Part 3: GNSS principles,Navires et technologie maritime — Dispositifs de transmission de données de pilotage — Partie 3: Principes pour un système global de navigation par satellites,2004-05-21,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[62180],"['en','ru']",11,"<p>ISO 22090-3:2004 specifies general requirements, construction, performance and testing of Transmitting Heading Devices using GNSS principles as required by chapter V, SOLAS 1974 (as amended).</p>"

41653,IS,Cor,ISO 22090-3:2004/Cor 1:2005,Ships and marine technology — Transmitting heading devices (THDs) — Part 3: GNSS principles — Technical Corrigendum 1,Navires et technologie maritime — Dispositifs de transmission de données de pilotage — Partie 3: Principes pour un système global de navigation par satellites — Rectificatif technique 1,2005-01-04,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[62180],"['en','ru']",1,

36093,IS,,ISO 22093:2003,Industrial automation systems and integration — Physical device control — Dimensional Measuring Interface Standard (DMIS),Systèmes d'automatisation industrielle et intégration — Contrôle du dispositif physique — Norme d'interface de mesurage dimensionnel (DMIS),2003-11-13,1,['25.040.40'],ISO/TC 184/SC 1,9599,,[56444],['en'],591,"<p>The objective of ISO 22093:2003 is to provide a standard for the bi-directional communication of inspection data between computer systems and inspection equipment. The Dimensional Measuring Interface Standard (DMIS) is a vocabulary of terms, which establishes a neutral format for inspection programs and inspection results data.</p><p>While

72574,IS,,ISO 22109:2020,Industrial valves — Gearbox for valves,Robinetterie industrielle — Réducteur pour appareil de robinetterie,2020-01-10,1,['23.060.01'],ISO/TC 153,9599,,[89903],"['en','fr']",14,"<p>This document provides basic requirements for gearboxes to operate industrial valves for manual and automated on/off and modulating duties, this includes manual override gearboxes. It includes guidelines for classification, design and methods for conformity assessment.</p><p>It does not cover gear systems which are integral part in the design of valves and subsea gearboxes.</p><p>Other requirements or conditions of use different from those indicated in this document are agreed between the p

36123,IS,,ISO 22111:2007,Bases for design of structures — General requirements,Bases du calcul des constructions — Exigences générales,2007-11-06,1,['91.080.01'],ISO/TC 98/SC 2,9599,,[68335],['en'],23,"<p>ISO 22111:2007 specifies the general requirements for the structural design of buildings and industrial and civil engineering structures using reliability-based concepts. </p><p>ISO 22111:2007 is applicable to the design of complete structures, the structural elements making up the structure and the foundation. Information on the assessment of existing structures is given in ISO 13822.</p>"

36124,IS,,ISO 22112:2005,Dentistry — Artificial teeth for dental prostheses,Art dentaire — Dents artificielles pour prothèses dentaires,2005-11-08,1,['11.060.10'],ISO/TC 106/SC 2,9599,"[10803,23671,8603]",[70086],"['en','fr']",16,"<p>ISO 22112:2005 specifies the classification, requirements, and test methods for synthetic polymer and ceramic teeth that are manufactured for use in prostheses used in dentistry. </p>"

45035,IS,,ISO 22119:2011,Microbiology of food and animal feeding stuffs — Real-time polymerase chain reaction (PCR) for the detection of food-borne pathogens — General requirements and definitions,Microbiologie des aliments — Réaction de polymérisation en chaîne (PCR) en temps réel pour la détection des micro-organismes pathogènes dans les aliments — Exigences générales et définitions,2011-07-08,1,['07.100.30'],ISO/TC 34/SC 9,9599,,[81777],"['en','fr','ru']",12,"<p>ISO 22119:2010 defines terms for the detection of food-borne pathogens in foodstuffs, and isolates obtained from them, using the polymerase chain reaction (PCR). ISO 22119:2010 specifies requirements for the amplification and dete

36147,IS,,ISO 22155:2005,Soil quality — Gas chromatographic quantitative determination of volatile aromatic and halogenated hydrocarbons and selected ethers — Static headspace method,Qualité du sol — Dosage des hydrocarbures aromatiques et halogénés volatils et de certains éthers par chromatographie en phase gazeuse — Méthode par espace de tête statique,2005-09-20,1,['13.080.10'],ISO/TC 190/SC 3,9599,,[50387],"['en','fr']",17,"<p>ISO 22155:2005 specifies a static headspace method for quantitative gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected aliphatic ethers in soil.</p><p>ISO 22155:2005 is applicable to all types of soil.</p><p>The limit of

50387,IS,,ISO 22155:2011,Soil quality — Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers — Static headspace method,Qualité du sol — Dosage des hydrocarbures aromatiques et halogénés volatils et de certains éthers par chromatographie en phase gazeuse — Méthode par espace de tête statique,2011-03-24,2,['13.080.10'],ISO/TC 190/SC 3,9599,[36147],[65184],"['en','fr']",21,"<p>ISO 22155:2011 specifies a static headspace method for quantitative gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected aliphatic ethers in soil.</p><p>ISO 22155:2011 is applicable to all types of soil.</p><p>The limit of deter

36149,IS,,ISO 22156:2004,Bamboo — Structural design,Bambou — Conception des structures,2004-05-14,1,['91.080.20'],ISO/TC 165,9599,,[73831],['en'],15,"<p>ISO 22156:2004 applies to the use of bamboo structures, i.e. structures made of bamboo (round bamboo, split bamboo, glued laminated bamboo) or bamboo-based panels joined together with adhesives or mechanical fasteners. </p><p>ISO 22156:2004 is based on limit-state design, and on the performance of the structure. It is only concerned with the requirements for mechanical resistance, serviceability and durability of structures. </p>"

36150,IS,,ISO 22157-1:2004,Bamboo — Determination of physical and mechanical properties — Part 1: Requirements,Bambou — Détermination des propriétés physiques et mécaniques — Partie 1: Exigences,2004-06-14,1,['79.040'],ISO/TC 165,9599,,[65950],['en'],19,"<p>ISO 22157-1:2004 specifies test methods for evaluating the following characteristic physical and strength properties for bamboo: moisture content, mass per volume, shrinkage, compression, bending, shear and tension.</p>"

36153,IS,,ISO 22174:2005,Microbiology of food and animal feeding stuffs — Polymerase chain reaction (PCR) for the detection of food-borne pathogens — General requirements and definitions,Microbiologie des aliments — Réaction de polymérisation en chaîne (PCR) pour la recherche de micro-organismes pathogènes dans les aliments — Exigences générales et définitions,2005-03-02,1,['07.100.30'],ISO/TC 34/SC 9,9599,,[81777],"['en','fr']",11,"<p>ISO 22174:2004 gives the general requirements for the <i>in vitro</i> amplification of nucleic acid sequences (DNA or RNA). It is applicable to the testing of foodstuffs and isolates obtained from foodstuffs for food-borne pathogens using the polymerase chain

40753,IS,,ISO 22179:2009,Intelligent transport systems — Full speed range adaptive cruise control (FSRA) systems — Performance requirements and test procedures,Systèmes intelligents de transport — Systèmes de commande de croisière adaptatifs à la gamme entière de vitesse (FSRA) — Exigences de performance et méthodes d'essai,2009-08-31,1,['43.040.15'],ISO/TC 204,9599,,"[71515,66880]",['en'],27,"<p>ISO 22179:2009 contains the basic control strategy, minimum functionality requirements, basic driver interface elements, minimum requirements for diagnostics and reaction to failure, and performance test procedures for full speed range adaptive cruise control (FSRA) systems. FSRA is fundamentally in

34902,IS,,ISO 22188:2004,Monitoring for inadvertent movement and illicit trafficking of radioactive material,Surveillance des mouvements non déclarés et des trafics illicites de matière radioactive,2004-06-14,1,['13.280'],ISO/TC 85/SC 2,9599,,[82296],"['en','fr']",35,"<p>ISO 22188:2004 specifies methods and means of monitoring for inadvertent movement and illicit trafficking of radioactive material. It provides guidelines on the use of both stationary and portable (e.g. hand-held) instruments to monitor for radiation signatures from radioactive material. Emphasis is placed on the operational aspects, i.e. requirements derived for monitoring of traffic and commodities mainly at border-crossin

7023,IS,,ISO 2219:1972,"Cork — Expanded pure agglomerated thermal cork — Characteristics, sampling and packing","Liège — Agglomérés expansés purs thermiques — Caractéristiques, échantillonnage et emballage",1972-04-01,1,['79.100'],ISO/TC 87,9599,,[7024],"['en','fr']",2,

7024,IS,,ISO 2219:1989,"Expanded pure agglomerated cork for thermal insulation — Characteristics, sampling and packaging","Agglomérés expansés purs de liège pour isolation thermique — Caractéristiques, échantillonnage et emballage",1989-07-27,2,"['79.100','91.100.60']",ISO/TC 87,9599,[7023],[44779],"['en','fr']",2,"<p>Specifies the characteristics (i.e. finish, dimensions, modulus of rupture and thermal conductivity) of slabs and panels used as non-visible thermal insulation and describes the relevant methods. Is applicable to materials used at temperatures not exceeding 105 °C.</p>"

72861,IS,,ISO 22195-1:2020,Textiles — Determination of index ingredient from coloured textiles — Part 1: Madder,Textiles — Détermination d'indicateurs d'ingrédients de textiles colorés — Partie 1: Garance,2020-04-16,1,['59.080.01'],ISO/TC 38,9599,,[83284],['en'],6,<p>This document specifies a test method which determines the index ingredient of chemicals in coloured fabric with madder.</p>

72862,IS,,ISO 22195-2:2020,Textiles — Determination of index ingredient from coloured textiles — Part 2: Turmeric,Textiles — Détermination d'indicateurs d'ingrédients de textiles colorés — Partie 2: Curcuma,2020-04-30,1,['59.080.01'],ISO/TC 38,9599,,[83285],['en'],7,<p>This document specifies a test method which determines the index ingredient of chemicals in coloured textile/fabric with turmeric.</p>

40759,IS,,ISO 22196:2007,Plastics — Measurement of antibacterial activity on plastics surfaces,Plastiques — Mesurage de l'action antibactérienne sur les surfaces en plastique,2007-10-09,1,['83.080.01'],ISO/TC 61/SC 6,9599,,[54431],"['en','ru']",16,"<p>ISO 22196:2007 specifies a method of evaluating the antibacterial activity of antibacterial-treated plastic products (including intermediate products).</p><p>It is not intended to be used to evaluate the effects and propagation of bacteria on plastics without antibacterial treatments. ISO 846 describes tests to evaluate the effects and propagation of bacteria on plastics, which are different from those covered by ISO 22196.</p><p>Secondary effe

40761,IS,,ISO 22197-1:2007,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 1: Removal of nitric oxide",Céramiques techniques — Méthodes d'essai relatives à la performance des matériaux photocatalytiques semi-conducteurs pour la purification de l'air — Partie 1: Élimination de l'oxyde nitrique,2007-08-22,1,['81.060.30'],ISO/TC 206,9599,,[65416],['en'],12,"<p>ISO 22197 -1:2007 specifies a test method for the determination of the air-purification performance of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal o

45742,IS,,ISO 22197-2:2011,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 2: Removal of acetaldehyde",Céramiques techniques — Méthodes d'essai relatives à la performance des matériaux photocatalytiques semi-conducteurs pour la purification de l'air — Partie 2: Élimination de l'acétaldéhyde,2011-03-24,1,['81.060.30'],ISO/TC 206,9599,,[72347],"['en','fr']",14,"<p>ISO 22197-2:2011 specifies a test method for the determination of the air-purification performance of materials that contain a photocatalyst or have photocatalytic films, usually made from semiconducting metal oxides, such

46016,IS,,ISO 22197-3:2011,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 3: Removal of toluene",Céramiques techniques — Méthodes d'essai relatives à la performance des matériaux photocatalytiques semi-conducteurs pour la purification de l'air — Partie 3: Élimination du toluène,2011-03-24,1,['81.060.30'],ISO/TC 206,9599,,[72348],"['en','fr']",11,"<p>ISO 22197-3:2011 specifies a test method for the determination of the air-purification performance of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides, s

53010,IS,,ISO 22197-4:2013,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 4: Removal of formaldehyde",Céramiques techniques — Méthodes d'essai relatives à la performance des matériaux photocatalytiques semi-conducteurs pour la purification de l'air — Partie 4: Élimination du formaldéhyde,2013-04-08,1,['81.060.30'],ISO/TC 206,9599,,"[77116,80915]","['en','fr']",10,"<p>ISO 22197-4:2013 specifies a test method for the determination of the air-purification performance of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducti

53011,IS,,ISO 22197-5:2013,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 5: Removal of methyl mercaptan",Céramiques techniques — Méthodes d'essai relatives à la performance des matériaux photocatalytiques semi-conducteurs pour la purification de l'air — Partie 5: Élimination du mercaptan méthylique,2013-04-08,1,['81.060.30'],ISO/TC 206,9599,,"[77315,80916]","['en','fr']",10,"<p>ISO 22197-5:2013 specifies a test method for the determination of the air-purification performance of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from

40770,IS,,ISO 22199:2006,"Electromagnetic compatibility — Product family standard for lifts, escalators and moving walks — Emission","Compatibilité électromagnétique — Norme pour la famille de produits: ascenseurs, escaliers mécaniques et trottoirs roulants — Émission",2006-04-19,1,['91.140.90'],ISO/TC 178,9599,,[51128],['en'],9,"<p>ISO 22199:2006 specifies the emission limits and test conditions for lifts, escalators and passenger conveyors, which are permanently installed in buildings and for which ISO/TC 178 has direct responsibility for the production of International Standards, in relation to electromagnetic interference. These limits however, might not provide full protection against

51128,IS,,ISO 22199:2009,"Electromagnetic compatibility — Product family standard for lifts, escalators and moving walks — Emission","Compatibilité électromagnétique — Norme pour la famille de produits: ascenseurs, escaliers mécaniques et trottoirs roulants — Émission",2009-12-07,2,['91.140.90'],ISO/TC 178,9599,[40770],"[69335,73093]",['en'],11,"<p>ISO 22199:2010 specifies the emission limits and test conditions for lifts, escalators and passenger conveyors permanently installed in buildings.</p><p>For conducted phenomena and harmonic distortion, ISO 22199:2010 is applicable to equipment intended to be connected to low-voltage systems interfacing with the public supply at the low-voltage l

7025,IS,,ISO 2220:1972,Hand finishing sticks and oil stones — Dimensions,Bâtons d'affûtage à la main et pierres à huile — Dimensions,1972-02-01,1,['25.100.70'],ISO/TC 29/SC 5,9599,,"[2724,4713,4707,21897,4714,21898,4709,21899,4710,20536,2736,21900,4711,21632,4712,2715]","['en','fr']",1,

40771,IS,,ISO 22200:2006,"Electromagnetic compatibility — Product family standard for lifts, escalators and moving walks — Immunity","Compatibilité électromagnétique — Norme pour la famille de produits: ascenseurs, escaliers mécaniques et trottoirs roulants — Immunité",2006-04-19,1,['91.140.90'],ISO/TC 178,9599,,[45995],['en'],11,"<p>ISO 22000:2006 specifies the immunity levels that represent essential EMC requirements, and test conditions for lifts, escalators and moving walks that are permanently installed in buildings and for which ISO/TC 178 has direct responsibility for the production of International Standards, in relation to continuous and transient, conducted and radiated disturbance

45995,IS,,ISO 22200:2009,"Electromagnetic compatibility — Product family standard for lifts, escalators and moving walks — Immunity","Compatibilité électromagnétique — Norme pour la famille de produits: ascenseurs, escaliers mécaniques et trottoirs roulants — Immunité",2009-05-26,2,['91.140.90'],ISO/TC 178,9599,[40771],"[74807,73094,67795]",['en'],16,"<p>ISO 22200:2008 specifies the immunity performance criteria and test levels for apparatus used in lifts, escalators and moving walks which are intended to be permanently installed in buildings, including the basic safety requirements regarding their electromagnetic compatibility<i> (</i>EMC) environment. These levels represent essential EMC r

54092,IS,,ISO 22201-2:2013,"Lifts (elevators), escalators and moving walks — Programmable electronic systems in safety related applications — Part 2: Escalators and moving walks (PESSRAE)","Ascenseurs, escaliers mécaniques et trottoirs roulants — Systèmes électroniques programmables dans les applications liées à la sécurité — Partie 2: Escaliers mécaniques et trottoirs roulants",2013-03-19,1,['91.140.90'],ISO/TC 178,9599,,"[73098,66857]",['en'],24,"<p>ISO 22201-2:2013 is applicable to the product family of escalators and moving walks used in residential buildings, offices, hospitals, hotels, industrial plants, etc. It covers those aspects that need to be addressed when programmable electroni

45698,IS,,ISO 22201:2009,Lifts (elevators) — Design and development of programmable electronic systems in safety-related applications for lifts (PESSRAL),Ascenseurs — Conception et mise au point des systèmes électroniques programmables dans les applications liées à la sécurité des ascenseurs (PESSRAL),2009-01-05,1,['91.140.90'],ISO/TC 178,9599,,[66901],['en'],44,"<p>ISO 22201:2009 is applicable to the product family of passenger and goods/passenger lifts used in residential buildings, offices, hospitals, hotels, industrial plants, etc. ISO 22201:2009 covers those aspects that it is necessary to address when programmable electronic systems are used to carry out electric safety functions for l

59402,IS,Cor,ISO 22201:2009/Cor 1:2011,Lifts (elevators) — Design and development of programmable electronic systems in safety-related applications for lifts (PESSRAL) — Technical Corrigendum 1,Ascenseurs — Conception et mise au point des systèmes électroniques programmables dans les applications liées à la sécurité des ascenseurs (PESSRAL) — Rectificatif technique 1,2011-03-11,1,['91.140.90'],ISO/TC 178,9599,,[66901],['en'],2,

72883,IS,,ISO 22212:2019,Traditional Chinese medicine — Gastrodia elata tuber,Médecine traditionnelle chinoise — Tubercule de Gastrodia elata,2019-03-08,1,['11.120.10'],ISO/TC 249/SC 1,9599,,[91415],['en'],18,"<p>This document specifies minimum requirements and test methods for <i>Gastrodia elata</i> tuber that is derived from cultivated and artificially propagated <i>Gastrodia elata</i> Bl.</p><p>It is applicable to <i>Gastrodia elata</i> tuber that is sold and used as Chinese materia medica, specifically excluding the wild forms of the species.</p>"

40793,IS,,ISO 22241-1:2006,Diesel engines — NOx reduction agent AUS 32 — Part 1: Quality requirements,Moteurs diesel — Agent AUS 32 de réduction des NOx — Partie 1: Exigences de qualité,2006-10-11,1,['43.060.40'],ISO/TC 22/SC 34,9599,[42853],[66408],['en'],7,"<p>ISO 22241-1:2006 specifies the quality characteristics of the NOx reduction agent AUS 32 (<b>a</b>queous <b>u</b>rea <b>s</b>olution) which is needed to operate converters with selective catalytic reduction, so-called SCR (Selective Catalytic Reduction) converters, in motor vehicles with diesel engines. SCR converters are particularly suitable for selectively reducing the nitrogen oxide (NOx) emissions of diesel engines.</p>"

40794,IS,,ISO 22241-2:2006,Diesel engines — NOx reduction agent AUS 32 — Part 2: Test methods,Moteurs diesel — Agent AUS 32 de réduction des NOx — Partie 2: Méthodes d'essai,2006-10-11,1,['43.060.40'],ISO/TC 22/SC 34,9599,[42854],[66409],['en'],43,<p>ISO 22241-2:2006 specifies test methods required for determination of the quality characteristics of the NOx reduction agent AUS 32 (aqueous urea solution) specified in ISO 22241-1.</p>

50927,IS,Cor,ISO 22241-2:2006/Cor 1:2008,Diesel engines — NOx reduction agent AUS 32 — Part 2: Test methods — Technical Corrigendum 1,Moteurs diesel — Agent AUS 32 de réduction des NOx — Partie 2: Méthodes d'essai — Rectificatif technique 1,2008-01-07,1,['43.060.40'],ISO/TC 22/SC 34,9599,,[66409],['en'],1,

44269,IS,,ISO 22241-3:2008,"Diesel engines — NOx reduction agent AUS 32 — Part 3: Handling, transportation and storing","Moteurs diesel — Agent AUS 32 de réduction des NOx — Partie 3: Manipulation, transport et stockage",2008-02-07,1,['43.060.40'],ISO/TC 22/SC 34,9599,,[66410],['en'],9,"<p>ISO 22241-3:2008 describes best practice recommendations and requirements for handling, transportation and storing of NOx reduction agent AUS 32 (aqueous urea solution), specified in ISO 22241-1. These recommendations and requirements are necessary to preserve the specified quality of AUS 32 from any point of production to the point where it is filled into the onboard tank of the vehicle, in order to ensur

42941,IS,,ISO 22241-4:2009,Diesel engines — NOx reduction agent AUS 32 — Part 4: Refilling interface,Moteurs diesel — Agent AUS 32 de réduction des NOx — Partie 4: Interface de remplissage,2009-07-23,1,['43.060.40'],ISO/TC 22/SC 34,9599,,[66411],"['en','ru']",13,"<p>ISO 22241-4:2009 specifies the refilling interface for the NOx reduction agent AUS 32 in compliance with ISO 22241-1, which is needed to operate converters with a selective catalytic reduction (SCR) exhaust treatment system.</p><p>ISO 22241-4:2009 specifies the minimum functional and geometric requirements of an open refilling system, in order to ensure compatibility between the on-board refilling system and the off-board refilli

66411,IS,,ISO 22241-4:2019,Diesel engines — NOx reduction agent AUS 32 — Part 4: Refilling interface,Moteurs diesel — Agent AUS 32 de réduction des NOx — Partie 4: Interface de remplissage,2019-07-12,2,['43.060.40'],ISO/TC 22/SC 34,9599,[42941],[82284],['en'],13,"<p>This document specifies the refilling interface for the NOx reduction agent AUS 32 in conformance with ISO 22241‑1, which is needed to operate converters with a selective catalytic reduction (SCR) exhaust treatment system.</p><p>This document specifies the minimum functional and geometric requirements of an open refilling system, in order to ensure compatibility between the on-board refilling system and the off-board refilling sy

54542,IS,,ISO 22241-5:2012,Diesel engines — NOx reduction agent AUS 32 — Part 5: Refilling interface for passenger cars,Moteurs diesel — Agent AUS 32 de réduction des NOx — Partie 5: Interface de remplissage pour voitures particulières,2012-11-27,1,['43.060.40'],ISO/TC 22/SC 34,9599,,[70266],['en'],16,"<p>ISO 22241-5:2012 applies to diesel engine powered road vehicles using selective catalytic reduction (SCR) technology. It is primarily intended for use by passenger cars and light commercial vehicles including buses with a gross vehicle mass of not more than 3.5 t, but may also be used by vehicles with a gross vehicle mass of over 3,5 t.</p><p>ISO 22241-5:2012 specifies the refilling interfa

56773,IS,,ISO 22262-2:2014,Air quality — Bulk materials — Part 2: Quantitative determination of asbestos by gravimetric and microscopical methods,Qualité de l'air — Matériaux solides — Partie 2: Dosage quantitatif de l'amiante en utilisant les méthodes gravimétrique et microscopique,2014-08-28,1,['13.040.20'],ISO/TC 146/SC 3,9599,,[87842],"['en','fr']",47,"<p>ISO 22262-2:2014 specifies procedures for quantification of asbestos mass fractions below approximately 5 %, and quantitative determination of asbestos in vermiculite, other industrial minerals and commercial products that incorporate these minerals.</p><p>ISO 22262-2:2014 is applicable to the quantitative analysis of:</p><p>a) any m

40841,IS,,ISO 22266-1:2009,Mechanical vibration — Torsional vibration of rotating machinery — Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW,Vibrations mécaniques — Vibration de torsion des machines tournantes — Partie 1: Groupes électrogènes à turbines à vapeur et à gaz situés sur terre et excédant 50 MW,2009-04-20,1,"['29.160.40','17.160']",ISO/TC 108/SC 2,9599,,"[78144,68124]",['en'],25,"<p>ISO 22266-1:2009 provides guidelines for applying shaft torsional vibration criteria, under normal operating conditions, for the coupled shaft system and long blades of a turbine generator set. In particular, these apply to the torsional natural frequencies of the coupled sh

57725,IS,,ISO 22282-4:2012,Geotechnical investigation and testing — Geohydraulic testing — Part 4: Pumping tests,Reconnaissance et essais géotechniques — Essais géohydrauliques — Partie 4: Essais de pompage,2012-06-01,1,['93.020'],ISO/TC 182,9599,,[78549],"['en','fr']",25,<p>ISO 22282-4:2012 establishes requirements for pumping tests as part of geotechnical investigation service in accordance with EN 1997-1 and EN 1997-2.</p><p>ISO 22282-4:2012 applies to pumping tests performed on aquifers whose permeability is such that pumping from a well can create a lowering of the piezometric head within hours or days depending on the ground conditions and the purpose. It covers pumping tests carried o

41474,IS,,ISO 22288:2006,Leather — Physical and mechanical tests — Determination of flex resistance by the vamp flex method,Cuir — Essais physiques et mécaniques — Détermination de la résistance à la flexion à l'aide de la méthode de flexion d'empeigne,2006-09-14,1,['59.140.30'],IULTCS,9599,,[54451],"['en','fr']",5,"<p>ISO 22288:2006 specifies a method for determining the wet or dry flex resistance of leather and finishes applied to leather. It is applicable to all types of leather below 3,0 mm in thickness.</p>"

7034,IS,,ISO 2229:1973,"Equipment for the petroleum and natural gas industries — Steel pipe flanges, nominal sizes 1/2 to 24 in — Metric dimensions",Matériel d'équipement pour les industries du pétrole et du gaz naturel — Brides pour tubes d'acier de diamètres nominaux 1/2 à 24 in — Dimensions métriques,1973-12-01,1,"['77.140.75','75.200']",ISO/TC 5,9599,,"[13573,13574,13575]","['en','fr']",54,

4095,IS,,ISO 223:1975,Withdrawal of ISO 223-1975,Annulation de l'ISO 223-1975,1975-03-01,1,['49.060'],ISO/TC 20,9599,,[13367],"['en','fr']",2,

7035,IS,,ISO 2230:1973,Vulcanized rubber — Guide to storage,Élastomères vulcanisés — Guide pour le stockage,1973-12-01,1,['83.060'],ISO/TC 45/SC 4,9599,,[35946],"['en','fr']",2,"<p>Covers the most suitable conditions for the storage. Specifies temperature, humidity, light, oxygen and ozone, deformation, contacts with various materials, containers, wrapping and covering materials, rotation of stocks and cleaning.</p>"

35946,IS,,ISO 2230:2002,Rubber products — Guidelines for storage,Produits à base d'élastomères — Lignes directrices pour le stockage,2002-04-25,2,['83.060'],ISO/TC 45/SC 4,9599,[7035],[89162],['en'],11,"<p>This International Standard give guidelines for the inspection, recording procedures, packaging and storage of products, assemblies and components made from vulcanized or thermoplastic rubber prior to being put into circulation.</p><p>It is applicable to both solid and cellular rubber products prepared from dry raw rubber, latex or other sources. It is subject only to the requirements or recommendations of product specifications in which details of storage requirements for specific product

56199,IS,,ISO 22300:2012,Societal security — Terminology,Sécurité sociétale — Terminologie,2012-05-15,1,"['03.100.01','01.040.03']",ISO/TC 292,9599,,[68436],"['ar','en','fr']",11,<p>ISO 22300:2012 contains terms and definitions applicable to societal security to establish a common understanding so that consistent terms are used.</p>

68436,IS,,ISO 22300:2018,Security and resilience — Vocabulary,Sécurité et résilience — Vocabulaire,2018-02-08,2,"['03.100.01','01.040.03']",ISO/TC 292,9599,[56199],[77008],"['en','fr']",35,<p>ISO 22300:2018 defines terms used in security and resilience standards.</p>

77008,IS,,ISO 22300:2021,Security and resilience — Vocabulary,Sécurité et résilience — Vocabulaire,2021-02-24,3,"['03.100.01','01.040.03']",ISO/TC 292,9599,[68436],[85749],"['en','fr']",53,<p>This document defines terms used in security and resilience standards.</p>

50038,IS,,ISO 22301:2012,Societal security — Business continuity management systems — Requirements,Sécurité sociétale — Systèmes de management de la continuité d'activité — Exigences,2012-05-15,1,"['03.100.70','03.100.01']",ISO/TC 292,9599,,[75106],"['ar','en','fr']",24,"<p>ISO 22301:2012 specifies requirements to plan, establish, implement, operate, monitor, review, maintain and continually improve a documented management system to protect against, reduce the likelihood of occurrence, prepare f

34938,IS,,ISO 22308:2005,Cork stoppers — Sensory analysis,Bouchons en liège — Analyse sensorielle,2005-06-22,1,"['67.240','79.100']",ISO/TC 87,9599,,"[73976,73977]","['en','fr','ru']",5,"<p>ISO 22308:2005 defines a test method for detecting, qualifying and eventually evaluating the exogenous odours/flavours of cork stoppers.</p><p>ISO 22308:2005 is applicable to all kinds of cork stoppers, ready for use, designed to be in contact with alcoholic drinks.</p>"

34939,IS,,ISO 22309:2006,Microbeam analysis — Quantitative analysis using energy-dispersive spectrometry (EDS),Analyse par microfaisceaux — Analyse élémentaire quantitative par spectrométrie à sélection d'énergie (EDS),2006-04-20,1,['71.040.99'],ISO/TC 202,9599,,[57850],"['en','fr']",23,"<p>ISO 22309:2006 gives guidance on the quantitative analysis at specific points or areas of a specimen using energy-dispersive spectrometry (EDS) fitted to a scanning electron microscope (SEM) or electron probe microanalyser (EPMA); any expression of amount, i.e. in terms of percent (mass fraction), as large/small or major/minor amounts is deemed to be quantitative. The correct identification of all element

7036,IS,,ISO 2231:1973,Fabric coated with rubber or plastics — Standard atmospheres for conditioning and testing,Supports textiles revêtus d'élastomères ou de plastiques — Atmosphères normales de conditionnement et d'essai,1973-11-01,1,['59.080.40'],ISO/TC 45,9599,,[7037],"['en','fr']",2,

53467,IS,,ISO 22311:2012,Societal security — Video-surveillance — Export interoperability,Sécurité sociétale — Vidéosurveillance — Interopérabilité de l'export,2012-11-15,1,['03.100.01'],ISO/TC 292,9599,,[69072],"['en','fr']",29,<p>ISO 22311:2012 is mainly for societal security purposes and specifies a common output file format that can be extracted from the video-surveillance contents collection systems (stand alone machines or large scale systems) by an exchangeable data storage media or through a network to allow end-users to access digital video-surveillance contents and perform their necessary processing.</p>

50050,IS,,ISO 22313:2012,Societal security — Business continuity management systems — Guidance,Sécurité sociétale — Systèmes de management de la continuité d'activité — Lignes directrices,2012-12-12,1,"['03.100.70','03.100.01']",ISO/TC 292,9599,,[75107],"['en','fr','ru']",46,"<p>ISO 22313:2012 for business continuity management systems provides guidance based on good international practice for planning, establishing, implementing, operating, monitoring, reviewing, maintaining and continually improving a documented management system that enables organizations to prepare for, respond to and recover from disruptive incidents when they arise.</p><p>It is not the intent of ISO 22313:2012 to imply

36185,IS,,ISO 22314:2006,Plastics — Glass-fibre-reinforced products — Determination of fibre length,Plastiques — Produits renforcés de fibres de verre — Détermination de la longueur des fibres,2006-05-02,1,['83.120'],ISO/TC 61/SC 13,9599,,"[50051,85808,62255]","['en','fr']",4,"<p>ISO 22314:2006 specifies a method of determining the length of the fibres present in a fibre-reinforced product. The method is applicable to moulding materials and to moulded parts. The test conditions specified limit the application of this method to thermoplastics reinforced with short glass fibres (less than 1 mm long), i.e. fibres whose length is less than or equal to 7,5 mm prior to incorporation in the mouldin

7038,IS,,ISO 2232:1973,Drawn wire for general purpose non-alloy steel wire ropes — Specifications,Fils tréfilés pour câbles d'usages courants en acier non allié — Spécifications,1973-12-01,1,['77.140.65'],ISO/TC 105,9599,,[7039],"['en','fr']",8,

7039,IS,,ISO 2232:1990,Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes — Specifications,Fils tréfilés ronds pour câbles d'usages courants en acier non allié et pour câbles en acier de gros diamètre — Spécifications,1990-12-06,2,['77.140.65'],ISO/TC 105,9599,[7038],"[63311,83194,69722]","['en','fr']",12,"<p>Specifies: the dimensional tolerances; the mechanical characteristics; the conditions with which the coating, if any, shall comply; the conditions of sampling, control and the terms of acceptance. Does not apply to wire for ropes for special applications. This second edition cancels and replaces the first edition (1973).</p>"

53347,IS,,ISO 22320:2011,Societal security — Emergency management — Requirements for incident response,Sécurité sociétale — Gestion des urgences — Exigences des opérations des secours,2011-11-02,1,['03.100.01'],ISO/TC 292,9599,,[67851],"['ar','en','fr']",21,

53335,IS,,ISO 22322:2015,Societal security — Emergency management — Guidelines for public warning,Sécurité sociétale — Gestion des urgences — Mises en garde de la population,2015-05-21,1,['03.100.01'],ISO/TC 292,9599,,[84558],['en'],12,"<p>ISO 22322:2015 provides guidelines for developing, managing, and implementing public warning before, during, and after incidents.</p><p>This International Standard is applicable to any organization responsible for public warning. It is applicable at all levels, from local up to international.</p><p>Before planning and implementing the public warning system, risks and consequences of potential hazards are assessed. This process is not part of this Internati

50061,IS,,ISO 22324:2015,Societal security — Emergency management — Guidelines for colour-coded alerts,Sécurité sociétale — Gestion des urgences — Lignes directrices relatives aux alertes à code couleur,2015-06-08,1,"['01.070','03.100.01']",ISO/TC 292,9599,,[84559],['en'],11,"<p>ISO 22324:2015 provides guidelines for the use of colour codes to inform people at risk as well as first response personnel about danger and to express the severity of a situation. It is applicable to all types of hazard in any location.</p><p>This International Standard does not cover the method for displaying colour codes, detailed ergonomic considerations related with viewing displays, or safety signs covered by I

50064,IS,,ISO 22327:2018,Security and resilience — Emergency management — Guidelines for implementation of a community-based landslide early warning system,Sécurité et résilience — Gestion des urgences — Lignes directrices pour la mise en oeuvre d'un système d'alerte locale immédiat de glissement de terrain,2018-10-25,1,['03.100.01'],ISO/TC 292/SC 1,9599,,[83417],['en'],15,"<p>This document gives guidelines for a landslide early warning system. It provides a definition, aims to improve understanding, describes methods and procedures to be implemented, and gives examples of types of activities.</p><p>It is applicable to communities vulnerable to landslides, without taking secondary effects in

7040,IS,,ISO 2233-1:1972,"Packaging — Complete, filled transport packages — Part 1: Conditioning for testing",Emballages — Emballages d'expédition complets et pleins — Partie 1: Conditionnement en vue des essais,1972-07-01,1,['55.180.40'],ISO/TC 122,9599,,[7041],['en'],3,

7041,IS,,ISO 2233:1986,"Packaging — Complete, filled transport packages — Conditioning for testing",Emballages — Emballages d'expédition complets et pleins — Conditionnement en vue des essais,1986-04-17,2,['55.020'],ISO/TC 122/SC 3,9599,[7040],[21511],['en'],3,

21511,IS,,ISO 2233:1994,"Packaging — Complete, filled transport packages — Conditioning for testing",Emballages — Emballages d'expédition complets et pleins — Conditionnement en vue des essais,1994-12-01,3,['55.180.40'],ISO/TC 122/SC 3,9599,[7041],[32409],"['en','fr']",3,

7042,IS,,ISO 2234-1:1972,"Packaging — Complete, filled transport packages — Part 1: Stacking test",Emballages — Emballages d'expédition complets et pleins — Partie 1: Essai de gerbage,1972-04-01,1,['55.180.40'],ISO/TC 122,9599,,[7043],['en'],2,

7043,IS,,ISO 2234:1985,"Packaging — Complete, filled transport packages — Stacking tests using static load",Emballages — Emballages d'expédition complets et pleins — Essai de gerbage utilisant une charge statique,1985-12-05,2,['55.180.40'],ISO/TC 122/SC 3,9599,[7042],[32410],"['en','fr']",2,

7044,IS,,ISO 2235:1981,"Abrasive sheets — Designation, dimensions and tolerances","Feuilles abrasives — Désignation, dimensions et tolérances",1981-07-01,2,['25.100.70'],ISO/TC 29/SC 5,9599,,[20749],"['en','fr']",1,

20749,IS,,ISO 2235:1993,"Abrasive sheets — Dimensions, tolerances and designation","Feuilles abrasives — Dimensions, tolérances et désignation",1993-07-22,3,['25.100.70'],ISO/TC 29/SC 5,9599,[7044],[28472],"['en','fr']",2,

7045,IS,,ISO 2236:1982,Assembly tools for screws and nuts — Forged and tubular socket wrenches — Maximum outside head dimensions,Outils de manoeuvre pour vis et écrous — Clés à béquille et à pipe forgées et clés en tube — Dimensions extérieures maximales des têtes,1982-12-01,2,['25.140.30'],ISO/TC 29,9599,,[7046],"['en','fr']",1,

71254,IS,,ISO 22367:2020,Medical laboratories — Application of risk management to medical laboratories,Laboratoires de biologie médicale — Application de la gestion des risques aux laboratoires de biologie médicale,2020-02-25,1,['11.100.01'],ISO/TC 212,9599,"[40918,53345]",[87738],"['en','es','fr']",82,"<p>This document specifies a process for a medical laboratory to identify and manage the risks to patients, laboratory workers and service providers that are associated with medical laboratory examinations. The process includes identifying, estimating, evaluating, controlling and monitoring the risks.</p><p>The requirements of this document are applicable to all aspects of the examinations an

34976,IS,,ISO 22368-1:2004,Crop protection equipment — Test methods for the evaluation of cleaning systems — Part 1: Internal cleaning of complete sprayers,Matériel de protection des cultures — Méthodes d'essai pour l'évaluation des systèmes de nettoyage — Partie 1: Nettoyage interne de la totalité du pulvérisateur,2004-02-24,1,['65.060.40'],ISO/TC 23/SC 6,9599,,[83378],"['en','fr']",4,"<p>ISO 22368-1:2004 specifies tests for determining the performance of the rinsing systems fitted onto sprayers used in crop protection for the internal cleaning of the complete sprayer, including the tank. It is applicable to mounted, trailed and self-propelled agricultural sprayers used for crop protection

36206,IS,,ISO 22374:2005,Dentistry — Dental handpieces — Electrical-powered scalers and scaler tips,Art dentaire — Pièces à main dentaires — Instruments pour détartrage électriques et parties actives des instruments pour détartrage,2005-09-09,1,['11.060.25'],ISO/TC 106/SC 4,9599,,[62362],"['en','fr']",10,"<p>ISO 22374:2005 specifies requirements and test methods for electrical-powered scalers and scaler tips, including piezo, ferrostrictive and magnetostrictive type ultrasonic scalers, operated as stand-alone items or connected to dental units, for use on patients. It also contains specifications on manufacturers' instructions, marking and packaging.</p>"

7047,IS,,ISO 2238:1972,Machine bridge reamers,"Alésoirs de chaudronnerie, à machine",1972-05-01,1,['25.100.30'],ISO/TC 29/SC 9,9599,,[50890],"['en','fr']",4,

50890,IS,,ISO 2238:2011,Machine bridge reamers,"Alésoirs de chaudronnerie, à machine",2011-08-05,2,['25.100.30'],ISO/TC 29/SC 9,9599,[7047],[75803],"['en','fr']",5,"<p>ISO 2238:2011 specifies the dimensions of machine bridge reamers. It gives, for a series of diameter ranges, <i>d</i>₁, from 6 mm to 50,8 mm, the values, in millimetres, for the following dimensions of these tools:</p><ul><li>overall length, <i>l</i>₃;</li><li>total cutting edge length, <i>l</i>₂;</li><li>tapered cutting edge length, <i>l</i>₁.</li></ul><p>Unless otherwise stated, these reamers are right-hand cutting.</p>"

55628,IS,,ISO 22389-2:2012,Timber structures - Bending applications of I-beams — Part 2: Component performance and manufacturing requirements,Structures en bois — Résistance à la flexion des poutres en I — Partie 2: Performances des composants et exigences de production,2012-01-06,1,['91.080.20'],ISO/TC 165,9599,,[74542],['en'],7,

7048,IS,,ISO 2239:1972,Photography — Light sources for use in sensitometric exposure — Simulation of the spectral distribution of daylight,Photographie — Sources de lumière destinées à l'exposition sensitométrique — Reproduction de la distribution spectrale de la lumière du jour,1972-10-01,1,['37.040.10'],ISO/TC 42,9599,,[14377],"['en','fr']",3,

50690,IS,,ISO 22390:2010,Timber structures — Laminated veneer lumber — Structural properties,Structures en bois — Lamibois — Propriétés structurelles,2010-07-23,1,['91.080.20'],ISO/TC 165,9599,,[72425],['en'],9,"<p>ISO 22390:2010 specifies requirements for establishing the characteristic properties of structural laminated veneer lumber (LVL), including 5th percentile strength values, stiffness characteristics and other performance characteristics, related to its end use as a structural product for dry use (bonding class 1). It is applicable to members used in flatwise or edgewise bending orientations.</p>"

40929,IS,,ISO 22391-1:2007,Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 1: General,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polyéthylène de meilleure résistance à la température (PE-RT) — Partie 1: Généralités,2007-01-10,1,"['93.025','23.040.01','91.140.60']",ISO/TC 138/SC 2,9599,,[46395],['en'],9,"<p>ISO 22391-1:2007 specifies the general aspects of piping systems made of polyethylene of raised temperature resistance (PE-RT), intended to be used for hot and cold water installations within buildings for the conveyance of water -- whether or not the water is intended fo

40943,IS,,ISO 22391-2:2007,Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polyéthylène de meilleure résistance à la température (PE-RT) — Partie 2: Tubes,2007-01-10,1,"['93.025','23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[46396],['en'],13,"<div id='MathJax_Message' style='display: none;'></div><p>This part of ISO 22391 specifies the characteristics of pipe made from polyethylene of raised temperature resistance (PE-RT), intended to be used for hot and cold water installations within buildings for the conveyance of wa

40945,IS,,ISO 22391-3:2007,Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polyéthylène de meilleure résistance à la température (PE-RT) — Partie 3: Raccords,2007-01-10,1,"['23.040.45','93.025','91.140.60']",ISO/TC 138/SC 2,9599,,[46397],['en'],12,"<p>ISO 22391-3:2007 specifies the characteristics of fittings for piping systems made from polyethylene of raised temperature resistance (PE-RT), intended to be used for hot and cold water installations within buildings for the conveyance of water -- whether or not the water

40947,IS,,ISO 22391-5:2007,Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polyéthylène de meilleure résistance à la température (PE-RT) — Partie 5: Aptitude à l'emploi du système,2007-01-10,1,"['93.025','23.040.01','91.140.60']",ISO/TC 138/SC 2,9599,,[46398],['en'],6,"<p>ISO 22391-5:2007 specifies the characteristics of the fitness for purpose of piping systems made from polyethylene of raised temperature resistance (PE-RT), intended to be used for hot and cold water installations within buildi

7049,IS,,ISO 2240:1982,Photography — Colour reversal camera films — Determination of ISO speed,Photographie — Films de prise de vues inversibles en couleur — Détermination de la sensibilité ISO,1982-07-01,2,['37.040.20'],ISO/TC 42,9599,,[7050],"['en','fr']",4,

7050,IS,,ISO 2240:1994,Photography — Colour reversal camera films — Determination of ISO speed,Photographie — Films de prise de vue inversibles en couleur — Détermination de la sensibilité ISO,1994-08-18,3,['37.040.20'],ISO/TC 42,9599,[7049],[34533],['en'],6,<p>Cancels and replaces the first edition (1982). Gives the method for determining the ISO speed of colour reversal camera films producing continuous-tone pictorial images that are intended to be viewed on transparency illuminators or by projection as slides. Also applies to 8 mm and 16 mm motion-picture films used in non-professional applications. Does not apply to professional motion-picture films regardless of their applications.</p>

7051,IS,,ISO 2241:1972,Photography — Light sources for use in sensitometric exposure — Simulation of the spectral distribution of tungsten illumination,Photographie — Sources de lumière destinées à l'exposition sensitométrique — Reproduction de la distribution spectrale de l'éclairage au tungstène,1972-10-01,1,['37.040.10'],ISO/TC 42,9599,,[14377],"['en','fr']",3,

40942,IS,,ISO 22412:2008,Particle size analysis — Dynamic light scattering (DLS),Analyse granulométrique — Dispersion lumineuse dynamique (DLD),2008-04-24,1,['19.120'],ISO/TC 24/SC 4,9599,,[65410],"['en','ru']",17,"<p>ISO 22412:2008 specifies a method for the application of dynamic light scattering (DLS) to the estimation of an average particle size and the measurement of the broadness of the size distribution of mainly submicrometre-sized particles or droplets dispersed in liquids.</p><p>ISO 22412:2008 is applicable to the measurement of a broad range of dilute and concentrated suspensions. The principle of DLS is the same as for a dilute dispersion. However, specific requirements for the i

65410,IS,,ISO 22412:2017,Particle size analysis — Dynamic light scattering (DLS),Analyse granulométrique — Dispersion lumineuse dynamique (DLD),2017-02-06,2,['19.120'],ISO/TC 24/SC 4,9599,"[21707,40942]",[85505],['en'],34,"<p>ISO 22412:2017 specifies the application of dynamic light scattering (DLS) to the measurement of average hydrodynamic particle size and the measurement of the size distribution of mainly submicrometre-sized particles, emulsions or fine bubbles dispersed in liquids. DLS is also referred to as 'quasi-elastic light scattering (QELS)' and 'photon correlation spectroscopy (PCS),' although PCS actually is one of the measurement techniques.</p><p>ISO 22412:2017 is applicable t

40946,IS,,ISO 22413:2007,Transfer sets for pharmaceutical preparations — Requirements and test methods,Ensemble de transfert pour préparations pharmaceutiques — Exigences et méthodes d'essai,2007-02-28,1,['11.040.20'],ISO/TC 76,9599,,[56026],['en'],13,<p>ISO 22413:2006 applies to sterilized single use transfer sets that are used for pharmaceutical preparations.</p>

56026,IS,,ISO 22413:2010,Transfer sets for pharmaceutical preparations — Requirements and test methods,Ensemble de transfert pour préparations pharmaceutiques — Exigences et méthodes d'essai,2010-06-16,2,['11.040.20'],ISO/TC 76,9599,[40946],"[70728,80893]","['en','fr']",13,<p>ISO 22413:2010 applies to sterilized single use transfer sets that are used for pharmaceutical preparations.</p>

73150,IS,,ISO 22418:2018,Intelligent transport systems — Fast service announcement protocol (FSAP),Systèmes de transport intelligents — Protocole d'annonce de service rapide (FSAP),2018-05-31,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,"[65607,61566]",[76968],['en'],55,"<p>This document specifies the 'Fast Service Announcement Protocol' (FSAP).</p><p>FSAP is in support of locally advertised ITS services uniquely identified by an ITS application identifier (ITS-AID).</p><p>This document specifies message formats and related basic protocol procedures by reference to ISO/TS 16460:2016, and further related protocol requirements for operation of FSAP in the context of an ITS station specified i

7052,IS,,ISO 2242:1972,Photography — Light sources for use in sensitometric exposure — Simulation of the spectral distribution of photoflood illumination,Photographie — Sources de lumière destinées à l'exposition sensitométrique — Reproduction de la distribution spectrale des lampes survoltées,1972-10-01,1,['37.040.10'],ISO/TC 42,9599,,[14377],"['en','fr']",3,

36219,IS,,ISO 22434:2006,Transportable gas cylinders — Inspection and maintenance of cylinder valves,Bouteilles à gaz transportables — Contrôle et maintenance des robinets de bouteilles,2006-08-23,1,"['23.020.35','23.060.01']",ISO/TC 58/SC 2,9599,,"[81480,80105]","['en','fr']",7,"<p>ISO 22434:2006 specifies the requirements for the inspection and maintenance of cylinder valves, including valves with integrated pressure regulators (VIPR) (see ISO 22435).</p><p>ISO 22434:2006 may be applied to cylinder valves at the time of the periodic inspection of gas cylinders, bundles, drums and trailers, and at any other time, e.g. at change of gas service (see ISO 11621). It does not apply to routine in

36220,IS,,ISO 22435:2007,Gas cylinders — Cylinder valves with integrated pressure regulators — Specification and type testing,Bouteilles à gaz — Robinets de bouteilles avec détendeur intégré — Spécifications et essais de type,2007-08-23,1,['23.020.35'],ISO/TC 58/SC 2,9599,,"[55429,81027,72560,61011]","['en','fr']",36,"<p>ISO 22435:2007 applies to cylinder valves with integrated pressure regulators (VIPR) intended to be fitted to gas cylinders that convey compressed, liquefied or dissolved gases.</p>"

58064,IS,Amd,ISO 22435:2007/Amd 1:2012,Gas cylinders — Cylinder valves with integrated pressure regulators — Specification and type testing — Amendment 1,Bouteilles à gaz — Robinets de bouteilles avec détendeur intégré — Spécifications et essais de type — Amendement 1,2012-11-27,1,['23.020.35'],ISO/TC 58/SC 2,9599,,"[81027,72560,61011]","['en','fr']",2,

7054,IS,,ISO 2244-1:1972,"Packaging — Complete, filled transport packages — Part 1: Horizontal impact tests (Inclined plane test, pendulum test)","Emballages — Emballages d'expédition complets et pleins — Partie 1: Essais au choc horizontal (Essai sur un plan incliné, essai au pendule)",1972-08-01,1,['55.180.40'],ISO/TC 122,9599,,[7055],['en'],3,

7055,IS,,ISO 2244:1985,"Packaging — Complete, filled transport packages — Horizontal impact tests (horizontal or inclined plane test; pendulum test)",Emballages — Emballages d'expédition complets et pleins — Essais de choc horizontal (essai sur plan horizontal ou incliné; essai au pendule),1985-11-07,2,['55.180.40'],ISO/TC 122/SC 3,9599,[7054],[32411],"['en','fr']",3,

39349,IS,,ISO 22442-1:2007,Medical devices utilizing animal tissues and their derivatives — Part 1: Application of risk management,Dispositifs médicaux utilisant des tissus animaux et leurs dérivés — Partie 1: Application de la gestion des risques,2007-11-27,1,['11.100.20'],ISO/TC 194,9599,,[68553],"['en','fr','ru']",26,"<p>ISO 22442-1:2007 applies to medical devices other than <i>in vitro</i> diagnostic medical devices manufactured utilizing materials of animal origin, which are non-viable or have been rendered non-viable. It specifies, in conjunction with ISO 14971, a procedure to identify the hazards and hazardous situations associated with such devices, to estimate and evaluate the resul

68553,IS,,ISO 22442-1:2015,Medical devices utilizing animal tissues and their derivatives — Part 1: Application of risk management,Dispositifs médicaux utilisant des tissus animaux et leurs dérivés — Partie 1: Application de la gestion des risques,2015-11-02,2,['11.100.20'],ISO/TC 194,9599,[39349],[74280],"['en','fr']",27,"<p>ISO 22442-1:2015 applies to medical devices other than in vitro diagnostic medical devices manufactured utilizing materials of animal origin, which are non-viable or have been rendered non-viable. It specifies, in conjunction with ISO 14971, a procedure to identify the hazards and hazardous situations associated with such devices, to estimate and evaluate the resulting