Withdrawn and superseded ISO standards — page 74 of 246

41389,IS,,ISO 20474-5:2008,Earth-moving machinery — Safety — Part 5: Requirements for hydraulic excavators,Engins de terrassement — Sécurité — Partie 5: Exigences applicables aux pelles hydrauliques,2008-12-08,1,['53.100'],ISO/TC 127/SC 2,9599,,[60738],"['en','fr']",12,"<p>ISO 20474-5:2008 gives the safety requirements specific to hydraulic excavators as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474-1, which specifies general safety requirements common to earth-moving machine families, and with ISO/TS 20474-14, which gives information on provisions that are mandatory in particular countries or regions. The specific requirements given in ISO 20474-5:2008 take pr

41390,IS,,ISO 20474-6:2008,Earth-moving machinery — Safety — Part 6: Requirements for dumpers,Engins de terrassement — Sécurité — Partie 6: Exigences applicables aux tombereaux,2008-12-08,1,['53.100'],ISO/TC 127/SC 2,9599,,[60739],"['en','fr']",9,"<p>ISO 20474-6:2008 gives the safety requirements specific to wheeled and crawler dumpers as defined in ISO 6165, including compact dumpers and compact dumpers with standing operator. It is not applicable to road‑truck‑mounted dumpers. It is intended to be used in conjunction with ISO 20474-1, which specifies general safety requirements common to earth-moving machine families, and with ISO/TS 20474-14, which gives information on provisions that are

41391,IS,,ISO 20474-7:2008,Earth-moving machinery — Safety — Part 7: Requirements for scrapers,Engins de terrassement — Sécurité — Partie 7: Exigences applicables aux décapeuses,2008-12-08,1,['53.100'],ISO/TC 127/SC 2,9599,,[60740],"['en','fr']",6,"<p>ISO 20474-7:2008 gives the safety requirements specific to wheeled and crawler scrapers, except for towed scrapers, as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474-1, which specifies general safety requirements common to earth-moving machine families, and with ISO/TS 20474-14, which gives information on provisions that are mandatory in particular countries or regions. The specific requirements given in ISO 20474-

41392,IS,,ISO 20474-8:2008,Earth-moving machinery — Safety — Part 8: Requirements for graders,Engins de terrassement — Sécurité — Partie 8: Exigences applicables aux niveleuses,2008-12-08,1,['53.100'],ISO/TC 127/SC 2,9599,,[60741],"['en','fr']",4,"<p>ISO 20474-8:2008 gives the safety requirements specific to graders as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474-1, which specifies general safety requirements common to earth‑moving machine families, and with ISO/TS 20474-14, which gives information on provisions that are mandatory in particular countries or regions. The specific requirements given in ISO 20474-8:2008 take precedence over the general requiremen

41393,IS,,ISO 20474-9:2008,Earth-moving machinery — Safety — Part 9: Requirements for pipelayers,Engins de terrassement — Sécurité — Partie 9: Exigences applicables aux tracteurs poseurs de canalisations,2008-12-08,1,['53.100'],ISO/TC 127/SC 2,9599,,[60742],"['en','fr']",7,"<p>ISO 20474-9:2008 gives the safety requirements specific to pipelayers as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474-1, which specifies general safety requirements common to earth‑moving machine families, and with ISO/TS 20474-14, which gives information on provisions that are mandatory in particular countries or regions. The specific requirements given in ISO 20474-9:2008 take preceden

6826,IS,,ISO 2048:1973,Double socket fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement,Emboîtures de manchons pour tubes pression en polychlorure de vinyle (PVC) non plastifié avec joints d'étanchéité élastiques — Profondeurs minimales d'emboîture,1973-03-01,1,['23.040.45'],ISO/TC 138,9599,,[6827],"['en','fr']",1,

6827,IS,,ISO 2048:1990,Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement,Manchons à deux emboîtures pour tubes pression en poly(chlorure de vinyle) non plastifié (PVC-U) avec joints d'étanchéité élastiques — Profondeurs minimales d'emboîture,1990-08-30,2,['23.040.45'],ISO/TC 138/SC 2,9599,[6826],[50363],"['en','fr']",1,<p>Specification of minimum depths of engagement for double socket fittings. Applies for nominal outside diameters of pipes between 63 mm and 400 mm.</p>

34186,IS,,ISO 20482:2003,Metallic materials — Sheet and strip — Erichsen cupping test,Matériaux métalliques — Tôles et bandes — Essai d'emboutissage Erichsen,2003-07-11,1,['77.040.10'],ISO/TC 164/SC 2,9599,[15700],[63857],"['en','fr']",6,"<p>ISO 20482:2003 specifies a standard test method for determining the ability of metallic sheets and strips having a thickness from 0,1 mm up to 2 mm and a width of 90 mm or greater to undergo plastic deformation in stretch forming.</p>"

35435,IS,,ISO 20483:2006,Cereals and pulses — Determination of the nitrogen content and calculation of the crude protein content — Kjeldahl method,Céréales et légumineuses — Détermination de la teneur en azote et calcul de la teneur en protéines brutes — Méthode de Kjeldahl,2006-10-20,1,['67.060'],ISO/TC 34/SC 4,9599,,[59162],"['en','fr']",13,"<p>ISO 20483:2006 specifies a method for the determination of the nitrogen content of cereals, pulses and derived products, according to the Kjeldahl method, and a method for calculating the crude protein content.</p><p>The method does not distinguish between protein nitrogen and non-protein nitrogen. If it is important to determine the non-protein nit

6828,IS,,ISO 2049:1972,Petroleum products — Determination of colour,Produits pétroliers — Détermination de la couleur,1972-03-01,1,['75.080'],ISO/TC 28,9599,,[20069],"['en','fr']",2,

34188,IS,,ISO 20501:2003,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Weibull statistics for strength data",Céramiques techniques — Statistiques Weibull des données de résistance,2003-11-25,1,['81.060.30'],ISO/TC 206,9599,,[69875],['en'],33,"<p>ISO 20501:2003 covers the reporting of uniaxial strength data and the estimation of probability distribution parameters for advanced ceramics which fail in a brittle fashion. The failure strength of advanced ceramics is treated as a continuous random variable. Typically, a number of test specimens with well-defined geometry are brought to failure under well-defined isothermal loading conditions. The load at which each specimen fai

55056,IS,Cor,ISO 20501:2003/Cor 1:2009,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Weibull statistics for strength data — Technical Corrigendum 1",Céramiques techniques — Statistiques Weibull des données de résistance — Rectificatif technique 1,2009-09-22,1,['81.060.30'],ISO/TC 206,9599,,[69875],['en'],1,

34191,IS,,ISO 20504:2006,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for compressive behaviour of continuous fibre-reinforced composites at room temperature",Céramiques techniques — Méthode d'essai de résistance à la compression des composites renforcés de fibres continues à température ambiante,2006-01-12,1,['81.060.30'],ISO/TC 206,9599,,[72346],"['en','fr']",22,"<p>ISO 20504:2006 describes procedures for determination of the compressive behaviour of ceramic matrix composite materials with continuous fibre reinforcement at room temperature. This method applies to all ceramic matrix composites with a continuous fibre reinforcement, uni-directional , bi-direc

72346,IS,,ISO 20504:2019,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of compressive properties",Céramiques techniques — Propriétés mécaniques des composites à matrice céramiques à température ambiante — Méthode de détermination des propriétés en compression,2019-07-31,2,['81.060.30'],ISO/TC 206,9599,[34191],[84435],"['en','fr']",17,"<p>This document describes procedures for determination of the compressive behaviour of ceramic matrix composite materials with continuous fibre reinforcement at room temperature. This method applies to all ceramic matrix composites with a continuous fibre reinfo

40156,IS,,ISO 20505:2005,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of the interlaminar shear strength of continuous-fibre-reinforced composites at ambient temperature by the compression of double-notched test pieces and by the Iosipescu test",Céramiques techniques — Détermination de la résistance au cisaillement interlaminaire des composites renforcés de fibres connues à température ambiente par compression d'éprouvettes doublement entaillées et par l'essai de Iosipescu,2005-09-21,1,['81.060.30'],ISO/TC 206,9599,,[82178],['en'],20,"<p>ISO 20505:2005 specifies a method for the determination of interlaminar shear strength of continuous-fibre-reinforced cer

34194,IS,,ISO 20507:2003,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Vocabulary",Céramiques techniques — Vocabulaire,2003-11-25,1,['81.060.30'],ISO/TC 206,9599,,[59566],['en'],32,"<p>ISO 20507:2003 provides a list of terms and associated definitions which are typically used for fine ceramic (advanced ceramic, advanced technical ceramic) materials, products, applications, properties and processes. ISO 20507:2003 contains, in separate lists, those abbreviations which have found general acceptance in scientific and technical literature; they are given together with the corresponding terms and definitions or descriptions.</p><p>In ISO 20507:2003, the terms are defined using

59566,IS,,ISO 20507:2014,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Vocabulary",Céramiques techniques — Vocabulaire,2014-11-14,2,['81.060.30'],ISO/TC 206,9599,[34194],[74705],"['en','fr']",32,"<p>ISO 20507:2014 is a vocabulary, which provides a list of terms and associated definitions typically used for fine ceramic (advanced ceramic, advanced technical ceramic) materials, products, applications, properties, and processes. This International Standard contains, in separate lists, those abbreviations which have found general acceptance in the scientific and technical literature; they are given together with the corresponding terms and definitions or descriptions.</p><p>I

39526,IS,,ISO 20515:2007,"Rolling bearings — Radial bearings, retaining slots — Dimensions and tolerances","Roulements — Roulements radiaux, encoches de retenue — Dimensions et tolérances",2007-07-24,1,['21.100.20'],ISO/TC 4/SC 12,9599,,[60136],"['en','fr']",7,"<p>ISO 20515:2007 specifies dimensions and tolerances of retaining slots to be used for outer rings of single-row angular contact ball bearings, four-point-contact ball bearings and radial cylindrical roller bearings. The retaining slots are not suitable for use in the outer rings of sealed and shielded radial ball bearings, nor in the outer rings of radial cylindrical roller bearings without ribs.</p>"

60136,IS,,ISO 20515:2012,"Rolling bearings — Radial bearings, retaining slots — Dimensions and tolerances","Roulements — Roulements radiaux, encoches de retenue — Dimensions et tolérances",2012-06-06,2,['21.100.20'],ISO/TC 4/SC 12,9599,[39526],[76645],"['en','fr']",8,"<p>ISO 20515:2012 specifies dimensions and tolerances of retaining slots to be used for outer rings of single-row angular contact ball bearings, four-point-contact ball bearings and radial cylindrical roller bearings. The retaining slots are not suitable for use in the outer rings of sealed and shielded radial ball bearings, nor in the outer rings of radial cylindrical roller bearings without ribs.</p>"

68227,IS,,ISO 20519:2017,Ships and marine technology — Specification for bunkering of liquefied natural gas fuelled vessels,Navires et technologie maritime — Spécification pour le soutage des navires fonctionnant au gaz naturel liquéfié,2017-02-10,1,['47.020.99'],ISO/TC 8,9599,,[80842],"['en','fr']",39,"<p>ISO 20519:2017 sets requirements for LNG bunkering transfer systems and equipment used to bunker LNG fuelled vessels, which are not covered by the IGC Code. This document includes the following five elements:</p><p>a) hardware: liquid and vapour transfer systems;</p><p>b) operational procedures;</p><p>c) requirement for the LNG provider to provide an LNG bunker delivery note;</p><

68293,IS,,ISO 20539:2019,"Translation, interpreting and related technology — Vocabulary","Traduction, interprétation et technologies apparentées — Vocabulaire",2019-12-12,1,"['01.020','01.040.01']",ISO/TC 37/SC 5,9599,,[81379],"['en','fr']",15,"<p>This document provides the vocabulary for translation, interpreting and related technology standards.</p>"

39545,IS,,ISO 20553:2006,Radiation protection — Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material,Radioprotection — Surveillance professionnelle des travailleurs exposés à un risque de contamination interne par des matériaux radioactifs,2006-04-13,1,['13.280'],ISO/TC 85/SC 2,9599,,[78759],"['en','fr','ru']",22,<p>ISO 20553:2006 specifies the minimum requirements for the design of professional programmes to monitor workers exposed to the risk of internal contamination by radioactive substances and establishes principles for the development of compatible goals and requirements for monitoring programmes.</p>

6833,IS,,ISO 2056:1976,Withdrawal of ISO 2056-1976,Annulation de l'ISO 2056-1976,1976-02-01,1,['23.040.20'],ISO/TC 138,9599,,[7438],"['en','fr']",3,

71570,IS,,ISO 20560-1:2020,Safety information for the content of piping systems and tanks — Part 1: Piping systems,Informations de sécurité relatives au contenu des systèmes de tuyauteries et des reservoirs — Partie 1: Systèmes de tuyauteries,2020-09-24,1,['01.080.20'],ISO/TC 145/SC 2,9599,,[86049],['en'],26,"<p>This document specifies safety information for overground piping systems related to the content of the piping system and associated hazards for the purpose of accident prevention, reducing risks to health and providing information for use in case of an emergency.</p><p>This document does not cover piping that is buried.</p><p>Safety signing of the hazards in an area is not part of th

34212,IS,,ISO 20562:2004,"Tyre valves — ISO core chambers No. 1, No. 2 and No. 3","Valves pour pneumatiques — Logements de mécanismes ISO no 1, no 2 et no 3",2004-07-08,1,['83.160.01'],ISO/TC 31/SC 9,9599,"[26091,13256,14181]",[61605],"['en','fr']",8,"<p>ISO 20562:2004 specifies the interchangeability dimensions of ISO core chambers Nos. 1, 2 and 3 for tyre valves. </p>"

35476,IS,,ISO 20566:2005,Paints and varnishes — Determination of the scratch resistance of a coating system using a laboratory car-wash,Peintures et vernis — Détermination de la résistance à la rayure d'un système de peinture sur un poste de lavage automobile de laboratoire,2005-02-09,1,"['43.020','87.040']",ISO/TC 35/SC 9,9599,,[51945],"['en','fr','ru']",8,"<p>ISO 20566:2005 describes a test procedure for assessing the scratch resistance of organic paint coatings, in particular paint coatings used in the automotive industry (i.e. for assessing their car-wash resistance). Machine-based washing is simulated in the laboratory environment using a rotating brush and synthetic dirt. The test cond

51945,IS,,ISO 20566:2013,Paints and varnishes — Determination of the scratch resistance of a coating system using a laboratory-scale car-wash,Peintures et vernis — Détermination de la résistance à la rayure d'un système de peinture sur un poste de lavage automobile de laboratoire,2013-02-13,2,"['43.020','87.040']",ISO/TC 35/SC 9,9599,[35476],[76045],"['en','fr']",8,

35477,IS,,ISO 20567-1:2005,Paints and varnishes — Determination of stone-chip resistance of coatings — Part 1: Multi-impact testing,Peintures et vernis — Détermination de la résistance des revêtements aux impacts de cailloux — Partie 1: Essais de chocs multiples,2005-03-07,1,['87.040'],ISO/TC 35/SC 9,9599,,[64860],"['en','fr','ru']",11,<p>ISO 20567-1:2005 specifies three methods for the evaluation of the resistance of automobile finishes and other coatings to chilled-iron grit projected onto the surface under test to simulate the impact of small stones.</p>

35478,IS,,ISO 20567-2:2005,Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body,Peintures et vernis — Détermination de la résistance des revêtements aux impacts de cailloux — Partie 2: Essai de choc simple par corps percutant guidé,2005-03-07,1,['87.040'],ISO/TC 35/SC 9,9599,,[64861],"['en','fr','ru']",8,<p>ISO 20567-2:2005 specifies a method for the evaluation of the resistance of automobile finishes and other coatings to the impact of a wedge-shaped body projected onto the surface under test to simulate the impact of stones.</p>

64861,IS,,ISO 20567-2:2017,Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body,Peintures et vernis — Détermination de la résistance des revêtements aux impacts de cailloux — Partie 2: Essai de choc simple par corps percutant guidé,2017-01-10,2,['87.040'],ISO/TC 35/SC 9,9599,[35478],[85313],"['en','fr']",9,<p>ISO 20567-2:2017 specifies a method for the evaluation of the resistance of automobile finishes and other coatings to the impact of a wedge-shaped body projected onto the surface under test to simulate the impact of stones.</p>

6835,IS,,ISO 2058:1973,Withdrawal of ISO 2058-1973,Annulation de l'ISO 2058-1973,1973-09-01,1,['83.060'],ISO/TC 45,9599,,[4140],"['en','fr']",2,

6836,IS,,ISO 2060:1972,Textiles — Yarn from packages — Determination of linear density (mass per unit length) — Skein method,Textiles — Fils sur enroulements — Détermination de la masse linéique (masse par unité de longueur) — Méthode de l'écheveau,1972-09-01,1,['59.080.20'],ISO/TC 38,9599,,[6837],"['en','fr']",12,

6838,IS,,ISO 2061:1972,Textiles — Determination of twist in yarns — Direct counting method,Textiles — Méthode de détermination de la torsion des fils — Méthode directe,1972-09-01,1,['59.080.20'],ISO/TC 38,9599,,[6839],"['en','fr']",7,

6839,IS,,ISO 2061:1995,Textiles — Determination of twist in yarns — Direct counting method,Textiles — Détermination de la torsion des fils — Méthode par comptage direct,1995-10-05,2,['59.080.20'],ISO/TC 38/SC 23,9599,[6838],[55555],"['en','fr']",9,"<p>Specifies a method for the determination of the direction of twist in yarns, the amount of twist, in terms of turns per unit length, and the change in length on untwisting, by the direct counting method. Applicable to single, folded and cabled yarns. Replaces the first edition, which has been technically revised.</p>"

55555,IS,,ISO 2061:2010,Textiles — Determination of twist in yarns — Direct counting method,Textiles — Détermination de la torsion des fils — Méthode par comptage direct,2010-07-27,3,['59.080.20'],ISO/TC 38/SC 23,9599,[6839],[65146],"['en','fr']",12,"<div id='MathJax_Message' style='display: none;'></div><p>ISO 2061:2010 specifies a method for the determination of the direction of twist in yarns, the amount of twist, in terms of turns per unit length, and the change in length on untwisting, by the direct counting method</p><p>ISO 2061:2010 is applicable to</p><ol><li>single yarns (spun and filament),</li><li>plied yarns, and</li><li>cabled yarns.</li></ol><p>Separate procedures are given for

6840,IS,,ISO 2062:1972,"Textiles — Yarn from packages — Method for determination of breaking load and elongation at the breaking load of single strands — (CRL, CRE and CRT testers)","Textiles — Fils sur enroulements — Méthode de détermination de la force de rupture et de l'allongement de rupture du fil individuel — (Appareils à vitesse constante d'accroissement de force, d'allongement ou de déplacement de la pince de traction)",1972-09-01,1,['59.080.20'],ISO/TC 38,9599,,[6841],"['en','fr']",9,

6841,IS,,ISO 2062:1993,Textiles — Yarns from packages — Determination of single-end breaking force and elongation at break,Textiles — Fils sur enroulements — Détermination de la force de rupture et de l'allongement à la rupture des fils individuels,1993-09-30,2,['59.080.20'],ISO/TC 38/SC 23,9599,[6840],[45642],"['en','fr']",6,"<p>Four methods using constant rate of specimen extension tensile testers are specified: A: manual, specimens are taken directly from conditioned packages; B: automatic, specimens are taken directly from conditioned packages; C: manual, relaxed test skeins are used after conditioning; D: manual, specimens are used after wetting. Applies to all types of yarn except glas

34238,IS,,ISO 20623:2003,Petroleum and related products — Determination of the extreme-pressure and anti-wear properties of fluids — Four ball method (European conditions),Pétrole et produits connexes — Détermination des propriétés extrême pression et anti-usure des fluides — Essai quatre billes (conditions européennes),2003-11-25,1,['75.100'],ISO/TC 28,9599,,"[70737,43229]","['en','fr']",17,"<p>ISO 20623:2003 specifies procedures for the measurement of the extreme-pressure (EP) and anti-wear properties of lubricating oils and fluids by means of the four ball machine. The conditions of test are those that apply in Europe and other areas that have similar electrical supply characteristics (20

61893,IS,,ISO 2063-1:2017,"Thermal spraying — Zinc, aluminium and their alloys — Part 1: Design considerations and quality requirements for corrosion protection systems","Projection thermique — Zinc, aluminium et alliages de ces métaux — Partie 1: Considérations de conception et exigences de qualité pour les systèmes de protection contre la corrosion",2017-09-08,1,"['25.220.20','25.220.40']",ISO/TC 107,9599,[37440],[76499],"['en','fr']",29,"<p>ISO 2063-1:2017 specifies requirements for the protection of iron and steel surfaces against corrosion by applying thermal-sprayed metallic coatings of zinc, aluminium or their alloys.</p><p>In ISO 2063-1:2017, requirements for the planning of the corr

6842,IS,,ISO 2063:1973,Metallic coatings — Protection of iron and steel against corrosion — Metal spraying of zinc and aluminium,Revêtements métalliques — Protection du fer et de l'acier contre la corrosion — Métallisation au pistolet du zinc et de l'aluminium,1973-07-01,1,['25.220.40'],ISO/TC 107,9599,,[6843],"['en','fr']",5,

6843,IS,,ISO 2063:1991,"Metallic and other inorganic coatings — Thermal spraying — Zinc, aluminium and their alloys","Revêtements métalliques et inorganiques — Projection thermique — Zinc, aluminium et alliages de ces métaux",1991-11-07,2,"['25.220.20','25.220.40']",ISO/TC 107,9599,[6842],[37440],"['en','fr']",14,<p>Specifies characteristic properties and test methods for coatings intended for corrosion protection. This second edition cancels and replaces the first edition (1973). Annex A forms an integral part of this standard. Annex B is for information only.</p>

37440,IS,,ISO 2063:2005,"Thermal spraying — Metallic and other inorganic coatings — Zinc, aluminium and their alloys","Projection thermique — Revêtements métalliques et autres revêtements inorganiques — Zinc, aluminium et alliages de ces métaux",2005-03-10,3,"['25.220.20','25.220.40']",ISO/TC 107,9599,[6843],"[61894,61893]","['en','fr']",12,"<p>ISO 2063:2005 applies to thermal-sprayed metallic coatings for the protection of iron and steel against corrosion by applying zinc or aluminium or their alloys to uncoated surfaces to be protected.</p><p>This International Standard deals with characteristic properties and gives test methods for coatings obtained by the spraying of zinc and aluminium

6844,IS,,ISO 2064:1980,Metallic and other non-organic coatings — Definitions and conventions concerning the measurement of thickness,Revêtements métalliques et autres revêtements non organiques — Définitions et principes concernant le mesurage de l'épaisseur,1980-07-01,2,"['25.220.20','25.220.40']",ISO/TC 107,9599,,[6845],"['en','fr']",2,

6846,IS,,ISO 2065:1972,Textile machinery and accessories — Cylindrical tubes for tape yarns,Matériel pour l'industrie textile — Tubes cylindriques pour lames textiles,1972-03-01,1,['59.120.20'],ISO/TC 72,9599,,[9542],"['en','fr']",1,

39578,IS,,ISO 20653:2006,"Road vehicles — Degrees of protection (IP-Code) — Protection of electrical equipment against foreign objects, water and access","Véhicules routiers — Degrés de protection (codes IP) — Protection des équipements électriques contre les corps étrangers, l'eau et les contacts",2006-08-03,1,['43.040.10'],ISO/TC 22,9599,,[58048],"['en','fr']",23,"<p>ISO 20653:2006 applies to degrees of protection (IP-Code) provided by enclosures of the electrical equipment of road vehicles. It specifies the following:</p><ol><li>Designations and definitions of types and degrees of protection provided by enclosures of electrical equipment (IP-Codes) for the:</li></ol>protection of electric

58048,IS,,ISO 20653:2013,"Road vehicles — Degrees of protection (IP code) — Protection of electrical equipment against foreign objects, water and access","Véhicules routiers — Degrés de protection (codes IP) — Protection des équipements électriques contre les corps étrangers, l'eau et les contacts",2013-02-20,2,['43.040.10'],ISO/TC 22/SC 32,9599,[39578],[76116],['en'],23,"<div id='MathJax_Message' style='display: none;'></div><p>This International Standard applies to degrees of protection (IP code) provided by enclosures of the electrical equipment of road vehicles. It specifies the following:</p><p>a) Designations and definitions of types and degrees of protection provided by enclosures of

6847,IS,,ISO 2066:1976,Cork — Expanded pure agglomerated cork — Determination of moisture content,Liège — Agglomérés purs — Détermination de l'humidité,1976-06-01,1,['79.100'],ISO/TC 87,9599,,[6848],"['en','fr']",1,

6848,IS,,ISO 2066:1986,Expanded pure agglomerated cork — Determination of moisture content,Agglomérés expansés purs de liège — Détermination de l'humidité,1986-10-16,2,['79.100'],ISO/TC 87,9599,[6847],"[28161,38157]","['en','fr']",2,<p>The described method consists of weighing a test sample followed by heating in specified condition and weighing again after cooling in a desiccator to ambient temperature. Compared to the first edition clauses 3 and 7 have been technically revised in this second edition.</p>

6849,IS,,ISO 2067:1976,Granulated cork — Sampling,Granulés crus de liège — Échantillonnage,1976-07-01,1,['79.100'],ISO/TC 87,9599,,[6850],"['en','fr']",2,

6850,IS,,ISO 2067:1988,Granulated cork — Sampling,Granulés crus de liège — Échantillonnage,1988-11-03,2,['79.100'],ISO/TC 87,9599,[6849],[23233],"['en','fr']",2,

23233,IS,,ISO 2067:1998,Granulated cork — Sampling,Granulés crus de liège — Échantillonnage,1998-10-01,3,['79.100'],ISO/TC 87,9599,[6850],"[54918,69752]","['en','fr']",3,

68785,IS,,ISO 20670:2018,Water reuse — Vocabulary,Réutilisation de l'eau — Vocabulaire,2018-12-20,1,"['01.040.13','13.060.01']",ISO/TC 282,9599,,[80388],"['en','fr']",13,<p>This document defines terms and definitions commonly used in water reuse standards.</p>

68786,IS,,ISO 20671:2019,Brand evaluation — Principles and fundamentals,Évaluation des marques — Principes et fondamentaux,2019-03-11,1,['03.140'],ISO/TC 289,9599,,[81739],"['en','fr']",12,"<p>This document specifies the fundamentals and principles for brand evaluation, including an integrated framework for brand evaluation containing necessary brand input elements, output dimensions and sample indicators.</p><p>This document can be used in internal and external brand evaluation.</p>"

39582,IS,,ISO 20672:2007,Ships and marine technology — Rate of turn indicators,Navires et technologie maritime — Fréquence des indicateurs de direction,2007-05-07,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[74753],"['en','ru']",6,"<p>ISO 20672:2007 specifies the construction, performance requirements, methods of testing and required test results of rate of turn indicators required by clause 2.9.1, Regulation 19, chapter V, SOLAS 1974 (as amended, 2000).</p>"

52281,IS,Cor,ISO 20672:2007/Cor 1:2008,Ships and marine technology — Rate of turn indicators — Technical Corrigendum 1,Navires et technologie maritime — Fréquence des indicateurs de direction — Rectificatif technique 1,2008-08-28,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[74753],"['en','ru']",1,

39583,IS,,ISO 20673:2007,Ships and marine technology — Electric rudder angle indicators,Navires et technologie maritime — Indicateurs de direction des gouvernails électriques,2007-05-07,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[74755],"['en','ru']",6,"<p>ISO 20673:2007 specifies the construction, performance requirements, methods of testing and required test results of electric rudder angle indicators required to comply with clause 2.5.4, Regulation 19, chapter V, SOLAS 1974 (as amended, 2000).</p>"

37818,IS,,ISO 20683-1:2005,"Aircraft ground equipment — Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear — Part 1: Main-line aircraft","Matériels au sol pour aéronefs — Conception, essais et entretien des tracteurs sans barre (TLTV) s'accouplant au train d'atterissage avant — Partie 1: Aéronefs de ligne",2005-04-12,1,['49.100'],ISO/TC 20/SC 9,9599,,[68258],"['en','fr']",21,"<p>ISO 20683-1:2005 is applicable to towbarless towing vehicles (TLTVs) interfacing with the nose landing gear of main line civil transport aircraft with a maximum ramp mass over 50 000 kg (110 000 lb). The requirements for regional transport aircraft with a lower maximu

37819,IS,,ISO 20683-2:2004,"Aircraft ground equipment — Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear — Part 2: Regional aircraft","Matériels au sol pour aéronefs — Conception, essais et entretien des tracteurs sans barre (TLTV) s'accouplant au train d'atterrissage avant — Partie 2: Aéronefs régionaux",2004-10-14,1,['49.100'],ISO/TC 20/SC 9,9599,,[68259],"['en','fr']",11,"<p>ISO 20683-2:2004 is applicable to towbarless aircraft towing vehicles (TLTVs) interfacing with the nose-landing gear of civil transport aircraft with a maximum ramp mass comprised between 10 000 kg and 50 000 kg (22 000 lb and 110 000 lb), commonly designated as 'reg

63261,IS,,ISO 20685-2:2015,Ergonomics — 3-D scanning methodologies for internationally compatible anthropometric databases — Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions,Ergonomie — Méthodologies d'exploration tridimensionnelles pour les bases de données anthropométriques compatibles au plan international — Partie 2: Protocole d'évaluation de la forme extérieure et de la répétabilité des positions relatives de repères,2015-08-04,1,['13.180'],ISO/TC 159/SC 3,9599,,[84350],"['en','fr']",20,"<p>ISO 20685-2:2015 addresses protocols for testing of 3-D surface-scanning systems in the acquisition of human body shape data and measurements. It does not

35514,IS,,ISO 20685:2005,3-D scanning methodologies for internationally compatible anthropometric databases,Méthodologies d'exploration tridimensionnelles pour les bases de données anthropométriques compatibles au plan international,2005-11-03,1,['13.180'],ISO/TC 159/SC 3,9599,,[54909],"['en','fr']",20,"<p>ISO 20685:2005 addresses protocols for the use of 3-D surface-scanning systems in the acquisition of human body shape data and measurements defined in ISO 7250 that can be extracted from 3-D scans. It does not apply to instruments that measure the location and/or motion of individual landmarks.</p><p>While mainly concerned with whole-body scanners, it is also applicable to body-segment sca

54909,IS,,ISO 20685:2010,3-D scanning methodologies for internationally compatible anthropometric databases,Méthodologies d'exploration tridimensionnelles pour les bases de données anthropométriques compatibles au plan international,2010-05-27,2,['13.180'],ISO/TC 159/SC 3,9599,[35514],[63260],"['en','fr']",20,"<p>ISO 20685:2010 addresses protocols for the use of 3-D surface-scanning systems in the acquisition of human body shape data and measurements defined in ISO 7250-1 that can be extracted from 3-D scans. It does not apply to instruments that measure the location and/or motion of individual landmarks.</p><p>While mainly concerned with whole-body scanners, it is also applicable to body-se

4073,IS,,ISO 207:1980,99.95 Unalloyed magnesium ingots — Chemical composition,"Lingots en magnésium non allié 99,95 — Composition chimique",1980-10-01,1,['77.120.20'],ISO/TC 79/SC 5,9599,,[15406],"['en','fr']",1,

6853,IS,,ISO 2070:1981,Aluminium oxide primarily used for the production of aluminium — Determination of calcium content — Naphthalhydroxamic acid spectrophotometric method,Oxyde d'aluminium principalement utilisé pour la production de l'aluminium — Dosage du calcium — Méthode spectrophotométrique à l'acide naphtalhydroxamique,1981-08-01,1,['71.100.10'],ISO/TC 226,9599,,[26265],"['en','fr']",4,

68860,IS,,ISO 20701:2017,Leather — Tests for colour fastness — Colour fastness to saliva,Cuir — Essais de solidité des coloris — Solidité des coloris à la salive,2017-12-14,1,['59.140.30'],IULTCS,9599,,[86794],"['en','fr']",5,"<p>ISO 20701 | IUF 427:2017 specifies a method for determining the colour fastness to saliva of all kinds of leathers, independent of the colouring procedure applied.</p><p>The method uses an artificial saliva solution to simulate whether colouring materials can migrate from leather to the mouth or to the mucous membranes.</p>"

39682,IS,,ISO 20712-1:2008,Water safety signs and beach safety flags — Part 1: Specifications for water safety signs used in workplaces and public areas,Signaux de sécurité relatifs à l'eau et drapeaux de sécurité pour les plages — Partie 1: Spécifications des signaux de sécurité relatifs à l'eau utilisés sur les lieux de travail et dans les lieux publics,2008-06-30,1,['01.080.10'],ISO/TC 145/SC 2,9599,"[45419,44914,44911,44469]",[72424],['en'],60,"<p>ISO 20712-1:2008 prescribes water safety signs intended for use in connection with the aquatic environment. It is intended for use by owners and operators of aquatic environments and by manufacturers of signs and equipment. However, it is not a

39684,IS,,ISO 20712-3:2008,Water safety signs and beach safety flags — Part 3: Guidance for use,Signaux de sécurité relatifs à l'eau et drapeaux de sécurité pour les plages — Partie 3: Lignes directrices pour l'utilisation,2008-08-11,1,['01.080.10'],ISO/TC 145/SC 2,9599,,[62269],['en'],26,"<p>ISO 20712-3:2008 gives guidance for the selection and use of water safety signs as specified in ISO 20712-1 and beach safety flags as specified in ISO 20712-2, in aquatic environments. It provides guidance on their location, mounting positions, lighting and maintenance. It also provides guidance on the design and location of multiple signs. </p><p>ISO 20712-3:2008 does not apply to traffic signs for use

62269,IS,,ISO 20712-3:2014,Water safety signs and beach safety flags — Part 3: Guidance for use,Signaux de sécurité relatifs à l'eau et drapeaux de sécurité pour les plages — Partie 3: Lignes directrices pour l'utilisation,2014-02-19,2,['01.080.10'],ISO/TC 145/SC 2,9599,[39684],[79604],['en'],28,"<p>ISO 20712-3:2014 gives guidance for the selection and use of water safety signs as specified in ISO 20712‑1 and beach safety flags as specified in ISO 20712‑2, in aquatic environments. It provides guidance on their location, mounting positions, lighting and maintenance. It also provides guidance on the design and location of multiple signs.</p><p>ISO 20712-3:2014 does not apply to traffic signs f

79604,IS,,ISO 20712-3:2020,Water safety signs and beach safety flags — Part 3: Guidance for use,Signaux de sécurité relatifs à l'eau et drapeaux de sécurité pour les plages — Partie 3: Lignes directrices pour l'utilisation,2020-07-24,3,['01.080.10'],ISO/TC 145/SC 2,9599,[62269],[86050],['en'],28,"<p>This document gives guidance for the selection and use of water safety signs as specified in ISO 7010 and beach safety flags as specified in ISO 20712-2 in aquatic environments. It provides guidance on their location, mounting positions, lighting and maintenance. It also provides guidance on the design and location of multiple signs.</p><p>This document does not apply to traffic signs for use on

6857,IS,,ISO 2074:1972,Plywood — Vocabulary,Contreplaqué — Vocabulaire,1972-12-01,1,"['79.060.10','01.040.79']",ISO/TC 89,9599,,[43024],"['en','fr']",18,"<p>The terms defined in this bilingual edition are subdivided into seven sections consisting of the composition and preparation of elements, the grain, plywood panels, defects, repair, state of surfaces and transformation. Alphabetical indices of the English and French terms are included.</p>"

34261,IS,,ISO 20743:2007,Textiles — Determination of antibacterial activity of antibacterial finished products,Textiles — Détermination de l'activité antibactérienne des produits finis antibactériens,2007-05-31,1,"['59.080.01','07.100.99']",ISO/TC 38,9599,,[59586],"['en','fr']",27,"<p>ISO 20743:2007 specifies quantitative test methods to determine the antibacterial activity of antibacterial finished textile products including nonwovens.</p><p>ISO 20743:2007 is applicable to all textile products, including cloth, wadding, thread and material for clothing, home furnishings and miscellaneous goods regardless of the type of antibacterial agent used (organic, inorganic, natural or man-made) or th

59586,IS,,ISO 20743:2013,Textiles — Determination of antibacterial activity of textile products,Textiles — Détermination de l'activité antibactérienne des produits textiles,2013-07-03,2,"['59.080.01','07.100.99']",ISO/TC 38,9599,[34261],[79819],"['en','fr']",32,"<p>ISO 20743:2013 specifies quantitative test methods to determine the antibacterial activity of all antibacterial textile products including nonwovens.</p><p>ISO 20743:2013 is applicable to all textile products, including cloth, wadding, thread and material for clothing, bedclothes, home furnishings and miscellaneous goods, regardless of the type of antibacterial agent used (organic, inorganic, natural or man-made) or the method of

68977,IS,,ISO 20749:2017,Dentistry — Pre-capsulated dental amalgam,Médecine bucco-dentaire — Amalgame dentaire en capsules prédosées,2017-03-17,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[82859],"['en','fr']",28,"<p>ISO 20749:2017 specifies the requirements and test methods for dental amalgam products supplied to the user in capsules, pre-dosed with dental amalgam alloy and dental mercury in quantities suitable for the creation of a single dental restoration.</p><p>ISO 20749:2017 specifies the requirements and test methods for dental amalgam alloys that are suitable for the preparation of dental amalgam and the capsule, together with the requirements and test methods for that dental amalgam and t

39703,IS,,ISO 20752:2007,"Cork stoppers — Determination of releasable 2, 4, 6-trichloroanisol (TCA)","Bouchons en liège — Dosage du 2, 4, 6-trichloroanisol (TCA) relargable",2007-01-26,1,['79.100'],ISO/TC 87,9599,,[62646],"['en','fr']",6,"ISO 20752:2007 specifies a test method to determine realisable 2,4,6-trichloroanisol (TCA) from cork stoppers. <p>ISO 20752:2007 is applicable to all types of cork stoppers.</p>"

62646,IS,,ISO 20752:2014,"Cork stoppers — Determination of releasable 2, 4, 6-trichloroanisol (TCA)","Bouchons en liège — Dosage du 2, 4, 6-trichloroanisol (TCA) relargable",2014-06-13,2,['79.100'],ISO/TC 87,9599,[39703],[80006],"['en','fr']",6,"<p>ISO 20752:2014 specifies a test method to determine releasable 2,4,6-trichloroanisol (TCA) from cork stoppers.</p><p>It is applicable to all types of cork stoppers and all their cork constituents.</p>"

37251,IS,,ISO 20753:2008,Plastics — Test specimens,Plastiques — Éprouvettes,2008-03-10,1,['83.080.01'],ISO/TC 61/SC 2,9599,,[72818],"['en','fr','ru']",15,"<p>ISO 20753:2008 specifies dimensional requirements relating to test specimens prepared from plastics materials intended for processing by moulding as well as to test specimens prepared by machining from sheets or shaped articles. It gives, in one document, the designations and dimensions of test specimens used for the acquisition of comparable data and also other frequently used specimens.</p>"

72818,IS,,ISO 20753:2018,Plastics — Test specimens,Plastiques — Éprouvettes,2018-10-19,2,['83.080.01'],ISO/TC 61/SC 2,9599,[37251],[83642],"['en','fr']",15,"<p>This document specifies dimensional requirements relating to test specimens prepared from plastics materials intended for processing by moulding, as well as to test specimens prepared by machining from sheets or shaped articles. It compiles the designations and dimensions of test specimens used for the acquisition of comparable data and also of other frequently used specimens.</p><p>The following types of test specimen are specified:</p><p>a) Type A1 and type A2 specimens (1 = injection moulded, 2 = machined from a sheet or shaped

68986,IS,,ISO 20759:2017,Traditional Chinese medicine — Artemisia argyi leaf,La médecine traditionnelle Chinoise — Artemisia argyi feuille,2017-12-12,1,['11.120.10'],ISO/TC 249,9599,,[87216],['en'],15,<p>ISO 20759:2017 specifies the minimum requirements and test methods of <i>Artemisia argyi</i> leaf for medicinal use. It is suitable for identification and quality control of this herbal medicine.</p>

6860,IS,,ISO 2076:1977,Textiles — Man-made fibres — Generic names,Fibres chimiques — Noms génériques,1977-03-01,2,"['01.040.59','59.060.20']",ISO/TC 38,9599,,[6861],"['en','fr']",5,

6861,IS,,ISO 2076:1989,Textiles — Man-made fibres — Generic names,Textiles — Fibres chimiques — Noms génériques,1989-11-23,3,"['01.040.59','59.060.20']",ISO/TC 38,9599,[6860],[24969],"['en','fr']",6,

24969,IS,,ISO 2076:1999,Textiles — Man-made fibres — Generic names,Textiles — Fibres chimiques — Noms génériques,1999-10-21,4,"['01.040.59','59.060.20']",ISO/TC 38/SC 23,9599,[6861],[50346],"['en','fr']",8,

50346,IS,,ISO 2076:2010,Textiles — Man-made fibres — Generic names,Textiles — Fibres chimiques — Noms génériques,2010-01-04,5,"['01.040.59','59.060.20']",ISO/TC 38,9599,[24969],[56206],"['en','fr']",8,"<p>ISO 2076:2010 lists the generic names used to designate the different categories of man-made fibres currently manufactured on an industrial scale for textile and other purposes, together with the distinguishing attributes that characterize them. The term <i>man-made fibres</i>, sometimes also called manufactured fibres,<i> </i>has been adopted for those fibres obtained by a manufacturing process, as distinct from materials which occur naturally in fibrous form.</p>"

56206,IS,,ISO 2076:2013,Textiles — Man-made fibres — Generic names,Textiles — Fibres chimiques — Noms génériques,2013-11-08,6,"['01.040.59','59.060.20']",ISO/TC 38,9599,[50346],[79685],"['en','fr']",24,"<p>ISO 2076:2013 lists the generic names used to designate the different categories of man-made fibres, based on a main polymer, currently manufactured on an industrial scale for textile and other purposes, together with the distinguishing attributes that characterize them. The term 'man-made fibres', sometimes also called manufactured fibres, has been adopted for those fibres obtained by a manufacturing process, as distinct from materials which occur naturally in fibrous form.</p><p>ISO 2076

68987,IS,,ISO 20760-1:2018,Water reuse in urban areas — Guidelines for centralized water reuse system — Part 1: Design principle of a centralized water reuse system,Réutilisation de l'eau en milieu urbain — Lignes directrices concernant les systèmes centralisés de réutilisation de l'eau — Partie 1: Principe de conception d'un système centralisé de réutilisation de l'eau,2018-02-09,1,['13.060.01'],ISO/TC 282/SC 2,9599,,[88926],"['en','fr']",23,"<p>ISO 20760-1:2018 provides guidelines for the planning and design of centralized water reuse systems and water reuse applications in urban areas.</p><p>ISO 20760-1:2018 is applicable to practitioners and authorities who intend to implement principles

68988,IS,,ISO 20760-2:2017,Water reuse in urban areas — Guidelines for centralized water reuse system — Part 2: Management of a centralized water reuse system,Réutilisation de l'eau en milieu urbain — Lignes directrices concernant les systèmes centralisés de réutilisation de l'eau — Partie 2: Gestion d'un système centralisé de réutilisation de l'eau,2017-12-05,1,['13.060.01'],ISO/TC 282/SC 2,9599,,[88927],"['en','fr']",12,"<p>ISO 20760-2:2017 provides guidelines for the management of centralized water reuse systems and water reuse applications in urban areas.</p><p>ISO 20760-2:2017 is applicable to practitioners and authorities who intend to implement management concepts, principles and supp

6862,IS,,ISO 2077:1979,Pure expanded corkboard — Determination of the modulus of rupture by bending,Agglomérés expansés purs de liège — Détermination de la tension de rupture par flexion,1979-12-01,1,['79.100'],ISO/TC 87,9599,,[45310],"['en','fr']",1,"<p>This method is applicable only to material with a thickness of 20 mm and over. Described are the apparatus, consisting of bending machine, metal ruler and electrical disc-saw, sampling and procedure. The results shall be given in megapascals to the nearest 0.01 MPa.</p>"

39711,IS,,ISO 20773:2007,Cigarettes — Determination of nicotine-free dry particulate matter and nicotine in sidestream smoke — Method using a routine analytical linear smoking machine equipped with a fishtail chimney,Cigarettes — Détermination de la matière particulaire anhydre et exempte de nicotine et de la nicotine dans le courant secondaire de fumée — Méthode utilisant une machine à fumer analytique de routine linéaire équipée de cheminées individuelles en forme de queue de poisson,2007-05-04,1,['65.160'],ISO/TC 126,9599,,[59227],"['en','fr']",24,"<p>ISO 20773:2007 is applicable to the determination of total particulate matter and to the subsequent determination of nicotine and nicotine-

39712,IS,,ISO 20774:2007,Cigarettes — Determination of carbon monoxide in sidestream smoke — Method using a routine analytical linear smoking machine equipped with a fishtail chimney,Cigarettes — Détermination du monoxyde de carbone dans le courant secondaire de fumée — Méthode utilisant une machine à fumer analytique de routine linéaire équipée d'une cheminée individuelle en forme de queue de poisson,2007-05-04,1,['65.160'],ISO/TC 126,9599,,[59228],"['en','fr']",22,"<p>ISO 20774:2007 is applicable to the determination of carbon monoxide present in the sidestream smoke from cigarettes. The described method is specified using the smoking parameters of puff volume, duration and frequency plus

41630,IS,,ISO 20776-1:2006,Clinical laboratory testing and in vitro diagnostic test systems — Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices — Part 1: Reference method for testing the in vitro activity of antimicrobial agents against rapidly growing aerobic bacteria involved in infectious diseases,Systèmes d'essais en laboratoire et de diagnostic in vitro — Sensibilité in vitro des agents infectieux et évaluation des performances des dispositifs pour antibiogrammes — Partie 1: Méthode de référence pour la détermination de la sensibilité in vitro aux agents antimicrobiens des bactéries aérobies à croissance rapide impliqu

41631,IS,,ISO 20776-2:2007,Clinical laboratory testing and in vitro diagnostic test systems — Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices — Part 2: Evaluation of performance of antimicrobial susceptibility test devices,Systèmes d'essais en laboratoire et de diagnostic in vitro — Sensibilité in vitro des agents infectieux et évaluation des performances des dispositifs pour antibiogrammes — Partie 2: Évaluation des performances des dispositifs pour antibiogrammes,2007-06-14,1,['11.100.20'],ISO/TC 212,9599,,[79377],"['en','fr','ru']",9,"<p>ISO 20776-2:2007 establishes acceptable performance criteria for antimicrobial sus

6863,IS,,ISO 2078:1978,Textile glass yarns — Designation,Fils de verre textile — Désignation,1978-10-01,3,['59.100.10'],ISO/TC 61,9599,,"[6864,6865]","['en','fr']",3,

6864,IS,,ISO 2078:1985,Textile glass — Yarns — Designation,Verre textile — Fils — Désignation,1985-09-05,4,['59.100.10'],ISO/TC 61/SC 13,9599,[6863],[6865],"['en','fr']",4,

6865,IS,,ISO 2078:1993,Textile glass — Yarns — Designation,Verre textile — Fils — Désignation,1993-01-27,5,['59.100.10'],ISO/TC 61/SC 13,9599,"[6864,6863]",[80368],"['en','fr']",4,"<p>Specifies a system of designating textile glass yarns based on their linear density expressed in the Tex System. The designation of a yarn consists of following elements: Type of glass used; type of yarn (continous or staple fiber); nominal diameter of fiber; linear density, direction, amount of twist and number of components. The definitions and rules of the singel-to-fold designation given in ISO 1139 are applied to these textile glass products.</p>"

66694,IS,Amd,ISO 2078:1993/Amd 1:2015,Textile glass — Yarns — Designation — Amendment 1,Verre textile — Fils — Désignation — Amendement 1,2015-11-13,5,['59.100.10'],ISO/TC 61/SC 13,9599,,[80368],"['en','fr']",1,

34266,IS,,ISO 20783-1:2003,Petroleum and related products — Determination of emulsion stability of fire-resistant fluids — Part 1: Fluids in category HFAE,Pétrole et produits connexes — Détermination de la stabilité d'émulsions de fluides difficilement inflammables — Partie 1: Fluides de catégorie HFAE,2003-12-09,1,['75.120'],ISO/TC 28,9599,,[56511],"['en','fr']",6,"<p>ISO 20783-1:2003 specifies a test method to assess the stability of emulsions within the category HFAE, as defined in ISO 6743-4, made up with waters having clearly-defined concentrations of salts. This method is applicable only to HFAE fluids and not to HFAS fluids.</p>"

35536,IS,,ISO 20785-1:2006,Dosemetry for exposures to cosmic radiation in civilian aircraft — Part 1: Conceptual basis for measurements,Dosimétrie de l'exposition au rayonnement cosmique dans l'aviation civile — Partie 1: Fondement théorique des mesurages,2006-03-31,1,"['13.280','49.020']",ISO/TC 85/SC 2,9599,,[55485],"['en','fr']",26,<p>ISO 20785-1:2006 gives the conceptual basis for the determination of ambient dose equivalent for the evaluation of exposure to cosmic radiation in civilian aircraft and for the calibration of instruments used for this purpose.</p>

55485,IS,,ISO 20785-1:2012,Dosimetry for exposures to cosmic radiation in civilian aircraft — Part 1: Conceptual basis for measurements,Dosimétrie pour l'exposition au rayonnement cosmique à bord d'un avion civil — Partie 1: Fondement théorique des mesurages,2012-12-14,2,"['13.280','49.020']",ISO/TC 85/SC 2,9599,[35536],[76015],"['en','fr']",28,<p>ISO 20785:2012 gives the conceptual basis for the determination of ambient dose equivalent for the evaluation of exposure to cosmic radiation in civilian aircraft and for the calibration of instruments used for this purpose.</p>

44177,IS,,ISO 20785-2:2011,Dosimetry for exposures to cosmic radiation in civilian aircraft — Part 2: Characterization of instrument response,Dosimétrie de l'exposition au rayonnement cosmique dans l'aviation civile — Partie 2: Caractérisation de la réponse des instruments,2011-05-23,1,"['13.280','49.020']",ISO/TC 85/SC 2,9599,,[76016],"['en','fr']",36,<p>ISO 20785-1:2011 specifies methods and procedures for characterizing the responses of devices used for the determination of ambient dose equivalent for the evaluation of exposure to cosmic radiation in civilian aircraft. The methods and procedures are intended to be understood as minimum requirements.</p>

57348,IS,,ISO 20785-3:2015,Dosimetry for exposures to cosmic radiation in civilian aircraft — Part 3: Measurements at aviation altitudes,Dosimétrie pour les expositions au rayonnement cosmique à bord d'un avion civil — Partie 3: Mesurages à bord d'avions,2015-11-13,1,"['13.280','49.020']",ISO/TC 85/SC 2,9599,,[83734],"['en','fr']",16,"<p>The following documents, in whole or in part, are normatively referenced in ISO 20785-3:2015 and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.</p><p>ISO/IEC Guide 98‑1, Uncertainty of measurement ? Part 1: I

6866,IS,,ISO 2079:1981,Surface treatment and metallic coatings — General classification of terms,Traitements de surface et revêtements métalliques — Classification générale des termes,1981-07-01,2,"['25.220.01','25.220.40','01.040.25']",ISO/TC 107,9599,,"[30265,45351]","['en','fr','ru']",9,"<p>This second edition cancels and replaces the first edition (i. e. ISO 2079:1973). Defines a nuber of generic terms for which the definition is considered necessary in order clarify the scope of these processes. In addition to terms used in the three official ISO languages (English, French and Russian), this International Standard includes the equivalent terms in the German language.</p>"

39740,IS,,ISO 20795-1:2008,Dentistry — Base polymers — Part 1: Denture base polymers,Art dentaire — Polymères de base — Partie 1: Polymères pour base de prothèses dentaires,2008-07-29,1,['11.060.10'],ISO/TC 106/SC 2,9599,"[35350,20266]",[62277],"['en','fr']",36,<p>ISO 20795-1:2008 classifies denture base polymers and copolymers and specifies their requirements. It also specifies the test methods to be used in determining compliance with these requirements. It further specifies requirements with respect to packaging and marking the products and to the instructions to be supplied for use of these materials. Furthermore it applies to denture base polymers for which the manufacturer claims that