Withdrawn and superseded ISO standards — page 73 of 246

67220,IS,,ISO 20187:2016,Inflatable play equipment — Safety requirements and test methods,Équipements de jeux gonflables — Exigences de sécurité et méthodes d'essai,2016-02-11,1,['97.220.01'],ISO/TC 83,9599,,"[84340,84341,84342]",['en'],42,"<p>ISO 20187:2016 is applicable to inflatable play equipment intended for use by children up to 14 years of age individually and as a group activity.</p><p>ISO 20187:2016 specifies safety requirements for inflatable play equipment for which the primary activities are bouncing and sliding. It sets measures to address risks and also to minimize accidents to users for those involved in the design, manufacture, and supply of inflatable play equipment. It spec

67225,IS,,ISO 20188:2018,Space systems — Product assurance requirements for commercial satellites,Systèmes spatiaux — Exigences en matière d'assurance produit des satellites commerciaux,2018-01-25,1,['49.140'],ISO/TC 20/SC 14,9599,,[88933],['en'],34,<p>ISO 20188:2018 provides the recommended practices of product assurance (PA) requirements applicable to commercial satellite.</p>

52696,IS,,ISO 20193:2012,Tobacco and tobacco products — Determination of the width of the strands of cut tobacco,Tabac et produits du tabac — Détermination de la largeur des brins de tabac haché,2012-11-14,1,['65.160'],ISO/TC 126/SC 1,9599,,[71707],"['en','fr']",7,<p>ISO 20193:2012 specifies a method for the determination of the width of strands of cut tobacco. It is only applicable if there is a uniform cut width.</p>

6785,IS,,ISO 2020:1973,Flexible steel wire rope for aircraft controls — Technical specification,Câbles en acier souple pour commandes d'aéronefs — Spécifications techniques,1973-02-01,1,['49.035'],ISO/TC 20,9599,,[6786],"['en','fr']",5,

6786,IS,,ISO 2020:1984,Aerospace — Mechanical system parts — Preformed flexible steel wire rope for aircraft controls — Technical specification,Aéronautique et espace — Éléments de systèmes mécaniques — Câbles en acier souples préformés pour commandes d'aéronefs — Spécifications techniques,1984-11-01,2,['49.035'],ISO/TC 20,9599,"[4654,6785]","[6787,6788]","['en','fr']",8,

34100,IS,,ISO 20200:2004,Plastics — Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test,Plastiques — Détermination du degré de désintégration de matériaux plastiques dans des conditions de compostage simulées lors d'un essai de laboratoire,2004-05-03,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[63367],"['en','fr']",8,<p>ISO 20200:2004 specifies a method of determining the degree of disintegration of plastic materials when exposed to a laboratory-scale composting environment. The method is not applicable to the determination of the biodegradability of plastic materials under composting conditions. Further testing is nece

63367,IS,,ISO 20200:2015,Plastics — Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test,Plastiques — Détermination du degré de désintégration de matériaux plastiques dans des conditions de compostage simulées lors d'un essai de laboratoire,2015-11-10,2,['83.080.01'],ISO/TC 61/SC 14,9599,[34100],[81932],"['en','fr']",8,<p>ISO 20200:2015 specifies a method of determining the degree of disintegration of plastic materials when exposed to a laboratory-scale composting environment. The method is not applicable to the determination of the biodegradability of plastic materials under composting conditions. Further testing

6789,IS,,ISO 2021:1975,Withdrawal of ISO 2021-1975,Annulation de l'ISO 2021-1975,1975-09-01,1,['35.040.10'],ISO/IEC JTC 1,9599,,[12991],['en'],3,

6790,IS,,ISO 2022:1982,Information processing — ISO 7-bit and 8-bit coded character sets — Code extension techniques,Traitement de l'information — Jeux ISO de caractères codés à 7 et à 8 éléments — Techniques d'extension de code,1982-12-01,2,['35.040.10'],ISO/IEC JTC 1/SC 2,9599,,[6791],"['en','fr']",32,

6791,IS,,ISO 2022:1986,Information processing — ISO 7-bit and 8-bit coded character sets — Code extension techniques,Traitement de l'information — Jeux ISO de caractères codés à 7 et à 8 éléments — Techniques d'extension de code,1986-05-01,3,['35.040.10'],ISO/IEC JTC 1/SC 2,9599,[6790],[22747],"['en','fr']",25,

6792,IS,,ISO 2023:1973,Lined industrial rubber footwear,"Articles chaussants doublés en élastomère, pour usages généraux et industriels",1973-05-01,1,['13.340.10'],ISO/TC 45,9599,,[6793],"['en','fr']",10,

6793,IS,,ISO 2023:1994,Rubber footwear — Lined industrial vulcanized-rubber boots — Specification,Articles chaussants en caoutchouc — Bottes doublées en caoutchouc vulcanisé à usage industriel — Spécifications,1994-11-24,2,['13.340.50'],ISO/TC 94/SC 3,9599,[6792],[51034],"['en','fr']",14,"<p>Cancels and replaces the first edition (1973). Specifies requirements for lined industrial vulcanized-rubber ankle, half-knee, short-knee and knee-height boots, for men and women, and lined rubber boots of three-quarter and full-thigh height for men. Does not cover the style of boot.</p>"

36317,IS,Cor,ISO 2023:1994/Cor 1:2001,Rubber footwear — Lined industrial vulcanized-rubber boots — Specification — Technical Corrigendum 1,Articles chaussants en caoutchouc — Bottes doublées en caoutchouc vulcanisé à usage industriel — Spécifications — Rectificatif technique 1,2001-12-15,2,['13.340.50'],ISO/TC 94/SC 3,9599,,[51034],"['en','fr']",1,

67389,IS,,ISO 20236:2018,"Water quality — Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion","Qualité de l'eau — Dosage du carbone organique total (COT), carbone organique dissous (COD), azote lié total (TNb) et azote lié dissous (DNb) après combustion catalytique oxydante à haute température",2018-10-02,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[85798],"['en','fr']",18,"<p>This document specifies a method for the determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) in t

6794,IS,,ISO 2024:1981,"Rubber footwear, lined conducting — Specification","Chaussures en caoutchouc conducteur, doublées — Spécifications",1981-12-01,2,['13.340.50'],ISO/TC 94/SC 3,9599,,[20144],"['en','fr']",7,<p>Specifies minimum requirements for fabrics and the physical properties required which partly are given in tables. Three annexes and two figures contain special details. Replaces the first edition (ISO 2024-1972).</p>

6795,IS,,ISO 2025:1972,Lined industrial rubber boots with general purpose oil resistance,Bottes doublées en élastomère à usage industriel résistant aux hydrocarbures,1972-08-01,1,['13.340.50'],ISO/TC 94/SC 3,9599,,[20145],"['en','fr']",2,"<p>In the Annex are specified sampling conditioning of the test pieces, temperature and duration of the test and immersion liquid, size of the test piece, apparatus and procedure. A formula is given to calculate the change in volume.</p>"

67422,IS,,ISO 20251:2016,Textile floor coverings — Water impermeability test,Revêtements de sol textiles — Essai d'imperméabilité à l'eau,2016-12-16,1,['97.150'],ISO/TC 219,9599,,[86657],"['en','fr']",3,<p>ISO 20251:2016 specifies a laboratory test method for determining the water impermeability of textile floor coverings.</p><p>This method cannot be used to characterize a wall-to-wall installation of textile floor covering tiles.</p>

39339,IS,,ISO 20252:2006,"Market, opinion and social research — Vocabulary and service requirements","Études de marché, études sociales et d'opinion — Vocabulaire et exigences de service",2006-03-29,1,"['03.020','01.040.03','03.100.20']",ISO/TC 225,9599,,[53439],"['en','fr','ru']",35,"<p>ISO 20252:2006 establishes the terms and definitions as well as the service requirements for organizations and professionals conducting market, opinion and social research.</p>"

53439,IS,,ISO 20252:2012,"Market, opinion and social research — Vocabulary and service requirements","Études de marché, études sociales et d'opinion — Vocabulaire et exigences de service",2012-05-22,2,"['03.020','01.040.03','03.100.20']",ISO/TC 225,9599,[39339],[73671],"['en','fr']",39,

6796,IS,,ISO 2026:1974,Aircraft — Connections for starting engines by air,Aéronefs — Raccords pour le démarrage à l'air des moteurs,1974-11-01,1,"['49.100','49.080']",ISO/TC 20/SC 9,9599,,"[66045,76576]","['en','fr']",4,"<p>Specifies the dimensions which are necessary to ensure international interchangeability of connectors with adaptors. Also gives the minimum clearances required on the aircraft to provide adequate access for the ground adaptor. The basic dimensions and tolerances for connections on aircraft and the minimum clearances around the connector, on the aircraft, are given in figure 1 and table 1 and figure 2 and table 2, respectively.</p>"

67438,IS,,ISO 20263:2017,Microbeam analysis — Analytical electron microscopy — Method for the determination of interface position in the cross-sectional image of the layered materials,Analyse par microfaisceaux — Microscopie électronique analytique — Méthode de détermination de la position d'interface dans l'image de coupe transversale des matériaux en couches,2017-12-01,1,"['71.040.50','37.020']",ISO/TC 202/SC 3,9599,,[87682],['en'],45,"<p>ISO 20263:2017 specifies a procedure for the determination of averaged interface position between two different layered materials recorded in the cross-sectional image of the multi-layered materials. It is not intended to determine the simulated interface

6797,IS,,ISO 2027:1978,"Rubber, natural latex, evaporated, preserved — Specification","Latex de caoutchouc naturel évaporé, préservé — Spécifications",1978-05-01,2,['83.040.10'],ISO/TC 45/SC 3,9599,,[6798],"['en','fr']",2,

6799,IS,,ISO 2028:1982,Rubber — Synthetic latices — Preparation of dry polymer,Caoutchouc — Latex synthétique — Préparation de polymère sec,1982-04-01,2,['83.040.10'],ISO/TC 45,9599,,[6800],"['en','fr']",1,

6800,IS,,ISO 2028:1989,Rubber — Synthetic latices — Preparation of dry polymer,Caoutchouc — Latex synthétiques — Préparation de polymère sec,1989-07-13,3,['83.040.10'],ISO/TC 45/SC 3,9599,[6799],[27914],"['en','fr']",2,

27914,IS,,ISO 2028:1999,Synthetic rubber latex — Preparation of dry polymer,Latex de caoutchouc synthétique — Préparation du polymère sec,1999-12-16,4,['83.040.10'],ISO/TC 45/SC 3,9599,[6800],[68061],"['en','fr']",5,

67511,IS,,ISO 20289:2018,Surface chemical analysis — Total reflection X-ray fluorescence analysis of water,Analyse chimique des surfaces — Analyse par fluorescence de rayons X en réflexion totale d'eau,2018-03-15,1,['71.040.40'],ISO/TC 201/SC 10,9599,,[88039],['en'],19,"<p>ISO 20289:2018 provides a chemical method for technicians working with Total Reflection X-ray Fluorescence (TXRF) instrumentation to perform measurements of water samples, according to good practices, with a defined degree of accuracy and precision. Target users are identified among laboratories performing routine analysis of large numbers of samples, which also comply with ISO/IEC 17025.</p><p>ISO 20289:2018 specifies a m

34138,IS,,ISO 20299-1:2006,Film for wrapping rubber bales — Part 1: Butadiene rubber (BR) and styrene-butadiene rubber (SBR),Emballage des balles en caoutchouc — Partie 1: Caoutchouc butadiène (BR) et caoutchouc styrène-butadiène (SBR),2006-01-12,1,['83.040.01'],ISO/TC 45/SC 3,9599,,[68069],['en'],2,"<p>ISO 20299-1:2006 specifies the material and physical property requirements for non-strippable film for wrapping general-purpose synthetic rubber bales, intended to keep the bales separate during storage, for example for wrapping</p><ul><li>styrene-butadiene rubber (SBR);</li><li>butadiene rubber (BR).</li></ul><p>It does not deal with strippable films.</p>"

51347,IS,Cor,ISO 20299-1:2006/Cor 1:2008,Film for wrapping rubber bales — Part 1: Butadiene rubber (BR) and styrene-butadiene rubber (SBR) — Technical Corrigendum 1,Emballage des balles en caoutchouc — Partie 1: Caoutchouc butadiène (BR) et caoutchouc styrène-butadiène (SBR) — Rectificatif technique 1,2008-04-02,1,['83.040.01'],ISO/TC 45/SC 3,9599,,[68069],['en'],2,

40668,IS,,ISO 20299-2:2006,Film for wrapping rubber bales — Part 2: Natural rubber,Emballage des balles en caoutchouc — Partie 2: Caoutchouc naturel,2006-02-15,1,['83.040.01'],ISO/TC 45/SC 3,9599,,[65690],"['en','fr']",2,"<p>ISO 20299-2:2006 specifies the material and physical property requirements for non-strippable high melting point film for wrapping natural-rubber bales, intended to keep the bales separate during storage.</p>"

65690,IS,,ISO 20299-2:2017,Film for wrapping rubber bales — Part 2: Natural rubber,Emballage des balles en caoutchouc — Partie 2: Caoutchouc naturel,2017-06-26,2,['83.040.01'],ISO/TC 45/SC 3,9599,"[40668,64132]",[87545],"['en','fr']",2,"<p>ISO 20299-2:2017 specifies the material and physical property requirements for non-strippable low density polyethylene film for wrapping natural rubber bales comprising of block natural rubber of 33,33 kg or 35 kg and natural rubber ribbed smoked sheets including bales of 33,33 kg, 35 kg, 50 kg and 111,11 kg, or any other bale weights as mutually agreed between the parties, and intended to keep the bales separate during transportation and storage.</p>" 656

6801,IS,,ISO 2030:1976,Cork — Granulated cork — Size analysis by mechanical sieving,Liège — Granulés crus — Analyse granulométrique par tamisage mécanique,1976-06-01,1,['79.100'],ISO/TC 87,9599,,[6802],"['en','fr']",2,

6802,IS,,ISO 2030:1990,Granulated cork — Size analysis by mechanical sieving,Granulés crus de liège — Analyse granulométrique par tamisage mécanique,1990-10-25,2,['79.100'],ISO/TC 87,9599,[6801],[73875],"['en','fr']",2,<p>Specifies a method to obtain granule size distribution of granulated cork by mechanical sieving. This second edition cancels and replaces the first edition (1976).</p>

35375,IS,,ISO 20301:2006,Health informatics — Health cards — General characteristics,Informatique de santé — Cartes de santé — Caractéristiques générales,2006-10-31,1,['35.240.80'],ISO/TC 215,9599,,[60501],['en'],12,"<p>ISO 20301:2006 is designed to confirm the identities of both the healthcare application provider and the healthcard holder in order that information may be exchanged by using cards issued for healthcare service.</p><p>ISO 20301:2006 focuses on the machine-readable cards of ID-1 type defined in ISO/IEC 7810 that are issued for healthcare services provided in a service area that crosses the national borders of two or more countries/areas.</p><p>ISO 20301:2006 applies to healthc

35376,IS,,ISO 20302:2006,Health informatics — Health cards — Numbering system and registration procedure for issuer identifiers,Informatique de santé — Cartes de santé — Système de numérotation et mode opératoire d'enregistrement pour les identificateurs d'émetteur,2006-12-01,1,['35.240.80'],ISO/TC 215,9599,,[64232],['en'],7,"<p>ISO 20302:2006 is designed to confirm, via a numbering system and registration procedure, the identities of both the healthcare application provider and the health card holder in order that information may be exchanged by using cards issued for healthcare service.</p><p>ISO 20302:2006 focuses on the machine-readable cards of ID-1 type defined in ISO/IEC 7810 that are

64232,IS,,ISO 20302:2014,Health informatics — Health cards — Numbering system and registration procedure for issuer identifiers,Informatique de santé — Cartes de santé — Système de numérotation et mode opératoire d'enregistrement pour les identificateurs d'émetteur,2014-03-14,2,['35.240.80'],ISO/TC 215,9599,[35376],[79931],['en'],7,"<p>ISO 20302:2014 is designed to confirm, via a numbering system and registration procedure, the identities of both the healthcare application provider and the health card holder in order that information may be exchanged by using cards issued for healthcare services.</p><p>ISO 20302:2014 focuses on the machine-readable cards of ID-1 type defined in ISO/IEC 7810

67591,IS,,ISO 20305:2020,Mine closure and reclamation — Vocabulary,Fermeture et remise en état des mines — Vocabulaire,2020-09-11,1,"['01.040.73','73.020']",ISO/TC 82/SC 7,9599,,[83086],"['en','fr']",9,<p>This document establishes a vocabulary for mine closure and reclamation management.</p>

6803,IS,,ISO 2031:1972,Granulated cork — Bulk density test,Granulés crus de liège — Détermination de la masse volumique,1972-03-01,1,['79.100'],ISO/TC 87,9599,,[6804],['en'],2,

6804,IS,,ISO 2031:1991,Granulated cork — Determination of bulk density,Granulés crus de liège — Détermination de la masse volumique,1991-05-02,2,['79.100'],ISO/TC 87,9599,[6803],"[28112,68750]","['en','fr']",2,"<p>Specifies the apparatus, the preparation and number of samples, and the test procedure; describes the expression of results and the contents of the test report. This second edition cancels and replaces the first edition (1972).</p>"

53047,IS,,ISO 20332:2008,Cranes — Proof of competence of steel structures,Appareils de levage à charge suspendue — Vérification d'aptitude des structures en acier,2008-12-08,1,['53.020.20'],ISO/TC 96/SC 10,9599,,[62663],"['en','fr']",71,"<p>ISO 20332:2008 sets forth general conditions, requirements, methods and parameter values for performing proof-of-competence determinations of the steel structures of cranes based upon the limit state method. It is intended to be used together with the loads and load combinations of the applicable parts of ISO 8686.</p><p>ISO 20332:2008 is general and covers cranes of all types. Other International Standards may give specific proof-of-competence requiremen

67726,IS,,ISO 20336:2017,Solid mineral fuels — Determination of total sulfur by Coulomb titration method,Combustibles minéraux solides — Détermination de la teneur totale en soufre par la méthode de titrage de Coulomb,2017-10-13,1,['75.160.10'],ISO/TC 27/SC 5,9599,,[86982],['en'],6,<p>ISO 20336:2017 specifies an alternative method of determining the total sulfur content of coal and coke by high-temperature combustion ? Coulomb titration.</p>

34146,IS,,ISO 20340:2003,Paints and varnishes — Performance requirements for protective paint systems for offshore and related structures,Peintures et vernis — Exigences de performance relatives aux systèmes de peinture pour la protection des structures offshore et structures associées,2003-11-17,1,['87.020'],ISO/TC 35/SC 14,9599,,[44180],"['en','fr']",23,"<p>ISO 20340:2003 deals with the performance requirements for the protection, by protective paint systems, of new offshore and related structures exposed to the offshore atmosphere, as well as those immersed in sea or brackish water. ISO 20340 can also be used for other structures, provided that the selected paints or protective paint syst

44180,IS,,ISO 20340:2009,Paints and varnishes — Performance requirements for protective paint systems for offshore and related structures,Peintures et vernis — Exigences de performance relatives aux systèmes de peinture pour la protection des structures offshore et structures associées,2009-03-17,2,['87.040'],ISO/TC 35/SC 14,9599,[34146],[64832],"['en','fr']",23,"<p>ISO 20340:2009 deals with performance requirements for protective paint systems for offshore and related structures (i.e. those exposed to the offshore environment, as well as those immersed in sea or brackish water). It can also be used for other structures, provided that the paints or protective paint systems selected comply wi

67750,IS,,ISO 20342-1:2019,Assistive products for tissue integrity when lying down — Part 1: General requirements,Produits d'assistance pour l'intégrité des tissus en position allongée — Partie 1: Exigences générales,2019-06-21,1,['11.180.01'],ISO/TC 173,9599,,[84125],"['en','fr']",36,"<p>This document specifies general requirements and related test methods that are relevant to assistive products for tissue integrity (APTI) in the lying position in different application environments such as hospitals, home care and institutions. This document applies to the safety of APTI, which are intended to remain in situ during periods of lying, and to prevent and/or treat pressure injuries.</p><p>This

32389,IS,,ISO 20344:2004,Personal protective equipment — Test methods for footwear,Équipement de protection individuelle — Méthodes d'essais pour les chaussures,2004-09-21,1,['13.340.50'],ISO/TC 94/SC 3,9599,[16204],[51034],"['en','fr']",73,<p>ISO 20344:2004 specifies methods for testing footwear designed as personal protective equipment.</p>

43212,IS,Amd,ISO 20344:2004/Amd 1:2007,Personal protective equipment — Test methods for footwear — Amendment 1,Équipement de protection individuelle — Méthodes d'essais pour les chaussures — Amendement 1,2007-08-27,1,['13.340.50'],ISO/TC 94/SC 3,9599,,[51034],"['en','fr']",4,

42259,IS,Cor,ISO 20344:2004/Cor 1:2005,Personal protective equipment — Test methods for footwear — Technical Corrigendum 1,Équipement de protection individuelle — Méthodes d'essais pour les chaussures — Rectificatif technique 1,2005-09-07,1,['13.340.50'],ISO/TC 94/SC 3,9599,[30343],[51034],"['en','fr']",2,

51034,IS,,ISO 20344:2011,Personal protective equipment — Test methods for footwear,Équipement de protection individuelle — Méthodes d'essai pour les chaussures,2011-11-29,2,['13.340.50'],ISO/TC 94/SC 3,9599,"[43212,32389,6793,36317,42259]",[73221],"['en','fr']",78,<p>ISO 20344:2011 specifies methods for testing footwear designed as personal protective equipment.</p>

32390,IS,,ISO 20345:2004,Personal protective equipment — Safety footwear,Équipement de protection individuelle — Chaussures de sécurité,2004-09-21,1,['13.340.50'],ISO/TC 94/SC 3,9599,[16205],[51036],"['en','fr']",28,<p>ISO 20345:2004 specifies basic and additional (optional) requirements for safety footwear.</p>

43213,IS,Amd,ISO 20345:2004/Amd 1:2007,Personal protective equipment — Safety footwear — Amendment 1,Équipement de protection individuelle — Chaussures de sécurité — Amendement 1,2007-08-27,1,['13.340.50'],ISO/TC 94/SC 3,9599,,[51036],"['en','fr']",4,

42260,IS,Cor,ISO 20345:2004/Cor 1:2005,Personal protective equipment — Safety footwear — Technical Corrigendum 1,Équipement de protection individuelle — Chaussures de sécurité — Rectificatif technique 1,2005-09-06,1,['13.340.50'],ISO/TC 94/SC 3,9599,[30344],[51036],"['en','fr']",1,

44218,IS,Cor,ISO 20345:2004/Cor 2:2006,Personal protective equipment — Safety footwear — Technical Corrigendum 2,Équipement de protection individuelle — Chaussures de sécurité — Rectificatif technique 2,2006-05-16,1,['13.340.50'],ISO/TC 94/SC 3,9599,,[51036],"['en','fr']",2,

51036,IS,,ISO 20345:2011,Personal protective equipment — Safety footwear,Équipement de protection individuelle — Chaussures de sécurité,2011-12-13,2,['13.340.50'],ISO/TC 94/SC 3,9599,"[43213,44218,32390,42260]",[73222],"['en','fr']",30,"<p>ISO 20345:2011 specifies basic and additional (optional) requirements for safety footwear used for general purpose. It includes, for example, mechanical risks, slip resistance, thermal risks, ergonomic behaviour.</p><p>Special risks are covered by complementary job-related standards, e.g. footwear for firefighters, electrical insulating footwear, footwear protecting against chain saw injuries, chemicals, molten metal splash, and protection for motor cycle

32391,IS,,ISO 20346:2004,Personal protective equipment — Protective footwear,Équipement de protection individuelle — Chaussures de protection,2004-09-21,1,['13.340.50'],ISO/TC 94/SC 3,9599,[16206],"[61336,51035]","['en','fr']",28,<p>ISO 20346:2004 specifies basic and additional (optional) requirements for protective footwear.</p>

43214,IS,Amd,ISO 20346:2004/Amd 1:2007,Personal protective equipment — Protective footwear — Amendment 1,Équipement de protection individuelle — Chaussures de protection — Amendement 1,2007-08-27,1,['13.340.50'],ISO/TC 94/SC 3,9599,,"[61336,51035]","['en','fr']",4,

42261,IS,Cor,ISO 20346:2004/Cor 1:2005,Personal protective equipment — Protective footwear — Technical Corrigendum 1,Équipement de protection individuelle — Chaussures de protection — Rectificatif technique 1,2005-09-07,1,['13.340.50'],ISO/TC 94/SC 3,9599,[30345],"[61336,51035]","['en','fr']",1,

44219,IS,Cor,ISO 20346:2004/Cor 2:2006,Personal protective equipment — Protective footwear — Technical Corrigendum 2,Équipement de protection individuelle — Chaussures de protection — Rectificatif technique 2,2006-05-16,1,['13.340.50'],ISO/TC 94/SC 3,9599,,"[61336,51035]","['en','fr']",2,

61336,IS,,ISO 20346:2014,Personal protective equipment — Protective footwear,Équipement de protection individuelle — Chaussures de protection,2014-04-29,2,['13.340.50'],ISO/TC 94/SC 3,9599,"[42261,43214,44219,32391]",[79481],"['en','fr','ru']",30,"<p>ISO 20346:2014 specifies basic and additional (optional) requirements for protective footwear used for general purpose. It includes, for example, mechanical risks, slip resistance, thermal risks, ergonomic behaviour.</p><p>Special risks are covered by complementary job-related standards (e.g. footwear for firefighters, electrical insulating footwear, protection against chain saw injuries, protection against chemicals and molten metal splash, pro

32392,IS,,ISO 20347:2004,Personal protective equipment — Occupational footwear,Équipement de protection individuelle — Chaussures de travail,2004-09-21,1,['13.340.50'],ISO/TC 94/SC 3,9599,[22112],[51033],"['en','fr']",26,<p>ISO 20347:2004 specifies basic and additional (optional) requirements for occupational footwear.</p>

43215,IS,Amd,ISO 20347:2004/Amd 1:2007,Personal protective equipment — Occupational footwear — Amendment 1,Équipement de protection individuelle — Chaussures de travail — Amendement 1,2007-08-27,1,['13.340.50'],ISO/TC 94/SC 3,9599,,[51033],"['en','fr']",4,

42262,IS,Cor,ISO 20347:2004/Cor 1:2005,Personal protective equipment — Occupational footwear — Technical Corrigendum 1,Équipement de protection individuelle — Chaussures de travail — Rectificatif technique 1,2005-09-07,1,['13.340.50'],ISO/TC 94/SC 3,9599,[30346],[51033],"['en','fr']",1,

44220,IS,Cor,ISO 20347:2004/Cor 2:2006,Personal protective equipment — Occupational footwear — Technical Corrigendum 2,Équipement de protection individuelle — Chaussures de travail — Rectificatif technique 2,2006-05-16,1,['13.340.50'],ISO/TC 94/SC 3,9599,,[51033],"['en','fr']",2,

51033,IS,,ISO 20347:2012,Personal protective equipment — Occupational footwear,Équipement de protection individuelle — Chaussures de travail,2012-01-30,2,['13.340.50'],ISO/TC 94/SC 3,9599,"[43215,32392,42262,44220]",[73223],"['en','fr']",28,"<p>ISO 20347:2011 specifies basic and additional (optional) requirements for occupational footwear that is not exposed to any mechanical risks (impact or compression).</p><p>Special risks are covered by complementary job-related standards (e.g. footwear for firefighters, electrical insulating footwear, protection against chain saw injuries, protection against chemicals and against molten metal splash, protection for motor cycle riders).</p>"

45544,IS,,ISO 20349:2010,Personal protective equipment — Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding — Requirements and test method,Équipement de protection individuelle — Chaussures de protection contre les risques thermiques et les projections de métal fondu comme rencontrés dans les fonderies et lors d'opérations de soudage — Exigences et méthode d'essai,2010-11-25,1,['13.340.50'],ISO/TC 94/SC 3,9599,,"[63446,66220]","['en','fr']",16,"<p>ISO 20349:2010 specifies requirements and test methods for footwear protecting users against thermal risks and molten iron or aluminium metal splashes such as those encountered in foundries, weldin

67758,IS,,ISO 20351:2017,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Absolute measurement of internal quantum efficiency of phosphors for white light emitting diodes using an integrating sphere","Céramiques fines (céramiques avancées, céramiques techniques avancées) — Mesurage absolu du rendement quantique interne des luminophores des diodes électroluminescentes blanches en utilisant une sphère intégrante",2017-09-08,1,['81.060.30'],ISO/TC 206,9599,,[86861],['en'],10,"<p>ISO 20351:2017 specifies a method of absolute measurement (using an integrating sphere) of internal quantum efficiency of phosphor powders which are excited by UV or blue light and emit visible light,

34165,IS,,ISO 20361:2007,Liquid pumps and pump units — Noise test code — Grades 2 and 3 of accuracy,Pompes et groupes motopompes pour liquides — Code d'essai acoustique — Classes de précision 2 et 3,2007-01-26,1,"['23.080','17.140.20']",ISO/TC 115,9599,,[67396],"['en','fr']",21,"<p>ISO 20361:2007 specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of the airborne noise emission of liquid pumps or pump units. It specifies the noise measurement methods and the operating and mounting conditions that shall be used for the test.</p><p>The use of ISO 20361:2007 ensures the reproducibility of the determin

67396,IS,,ISO 20361:2015,Liquid pumps and pump units — Noise test code — Grades 2 and 3 of accuracy,Pompes et groupes motopompes pour liquides — Code d'essai acoustique — Classes de précision 2 et 3,2015-06-01,2,"['23.080','17.140.20']",ISO/TC 115,9599,[34165],[70650],"['en','fr','ru']",22,"<p>ISO 20361:2015 specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration, and verification of the airborne noise emission of liquid pumps or pump units. It specifies the noise measurement methods and the operating and mounting conditions that shall be used for the test.</p><p>Noise emission characteristics include emission sound pr

6809,IS,,ISO 2037:1980,Metal pipes and fittings — Stainless steel tubes for the food industry,Tuyauteries et raccords métalliques — Tubes en acier inoxydable pour l'industrie alimentaire,1980-12-01,1,"['67.260','77.140.75']",ISO/TC 5,9599,,[6810],"['en','fr']",2,

67871,IS,,ISO 20383:2017,Tractors and machinery for agriculture and forestry — Speed Identification Sign (SIS),Tracteurs et matériels agricoles et forestiers — Signe d'identification de la vitesse (SIV),2017-11-16,1,['65.060.10'],ISO/TC 23/SC 4,9599,,[90099],"['en','fr']",6,"<p>ISO 20383:2017 specifies the dimensions, characteristics, and positioning of Speed Identification Signs (SIS). These signs indicate the maximum equipment ground speed, based on the ground speed design capability, for an agricultural vehicle.</p><p>A rear-facing SIS is visible to other operators on public roads approaching the equipment from behind. A forward-facing SIS, mounted on the front of towed equipment, alerts

6813,IS,,ISO 2039-1:1987,Plastics — Determination of hardness — Part 1: Ball indentation method,Plastiques — Détermination de la dureté — Partie 1: Méthode de pénétration à la bille,1987-04-02,1,['83.080.01'],ISO/TC 61/SC 2,9599,[6811],[21467],"['en','fr']",3,

21467,IS,,ISO 2039-1:1993,Plastics — Determination of hardness — Part 1: Ball indentation method,Plastiques — Détermination de la dureté — Partie 1: Méthode de pénétration à la bille,1993-01-28,2,['83.080.01'],ISO/TC 61/SC 2,9599,[6813],[31264],"['en','fr']",5,"<p>Specifies a method, which consists of forcing a ball under a specified load into the surface of a test specimen. The depth of impression is measured under load. The surface area of the impression is computed from its depth. The ball indentation hardness is then calculated from the following relationship: Ball indentation hardness = Applied load : Surface area of impression.</p>"

6811,IS,,ISO 2039:1973,Plastics and ebonite — Determination of hardness by the ball indentation method,Matières plastiques et ébonite — Détermination de la dureté — Méthode de pénétration à la bille,1973-11-01,1,['83.080.01'],ISO/TC 61/SC 2,9599,,[6813],['en'],3,

6814,IS,,ISO 2039-2:1981,Plastics — Determination of hardness by the ball indentation method — Part 2: Rockwell hardness,Plastiques — Détermination de la dureté — Méthode par pénétration à la bille — Partie 2: Dureté Rockwell,1981-10-01,1,['83.080.01'],ISO/TC 61/SC 2,9599,,[6815],"['en','fr']",5,

68879,IS,,ISO 20391-1:2018,Biotechnology — Cell counting — Part 1: General guidance on cell counting methods,Biotechnologie — Dénombrement des cellules — Partie 1: Lignes directrices générales relatives aux méthodes de dénombrement des cellules,2018-01-19,1,['07.080'],ISO/TC 276/SC 1,9599,,[87313],['en'],16,"<p>ISO 20391-1:2018 defines terms related to cell counting for biotechnology. It describes counting of cells in suspension (generally cell concentration) and cells adhered to a substrate (generally area density of cells). It provides key considerations for general counting methods (including total and differential counting, and direct and indirect counting) as well as for method selectio

4070,IS,,ISO 204:1997,Metallic materials — Uninterrupted uniaxial creep testing in tension — Method of test,Matériaux métalliques — Essai ininterrompu de fluage uniaxial en traction — Méthode d'essai,1997-03-13,1,['77.040.10'],ISO/TC 164/SC 1,9599,"[4072,4069]",[37601],"['en','fr']",12,

37601,IS,,ISO 204:2009,Metallic materials — Uniaxial creep testing in tension — Method of test,Matériaux métalliques — Essai de fluage uniaxial en traction — Méthode d'essai,2009-06-11,2,['77.040.10'],ISO/TC 164/SC 1,9599,[4070],[67737],"['en','fr']",42,"<p>ISO 204:2009 specifies the method for the uninterrupted and interrupted creep testsand defines the properties of metallic materials which can be determined from these tests, in particular the creep elongation and the time of creep rupture, at a specified temperature.</p><p>The stress rupture test is also covered, as is the testing of notched test pieces.</p>"

67737,IS,,ISO 204:2018,Metallic materials — Uniaxial creep testing in tension — Method of test,Matériaux métalliques — Essai de fluage uniaxial en traction — Méthode d'essai,2018-08-30,3,['77.040.10'],ISO/TC 164/SC 1,9599,[37601],[82162],"['en','fr']",53,"<p>This document specifies the methods for</p><p>a) uninterrupted creep tests with continuous monitoring of extension,</p><p>b) interrupted creep tests with periodic measurement of elongation,</p><p>c) stress rupture tests where normally only the time to fracture is measured,</p><p>d) a test to verify that a predetermined time can be exceeded under a given force, with the elongation or extension not necessarily being reported.</

34172,IS,,ISO 20401:2005,Pneumatic fluid power systems — Directional control valves — Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm,Transmissions pneumatiques — Distributeurs de commande directionnels — Spécification de l'affectation des broches des connecteurs électriques ronds de diamètres 8 mm et 12 mm,2005-01-12,1,['23.100.50'],ISO/TC 131/SC 5,9599,,[67812],"['en','fr']",4,<p>ISO 20401:2005 specifies the pin assignment for pneumatic directional control valves when used together with electrical connectors according to IEC 60947-5-2:2004.</p>

42764,IS,Cor,ISO 20401:2005/Cor 1:2005,Pneumatic fluid power systems — Directional control valves — Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm — Technical Corrigendum 1,Transmissions pneumatiques — Distributeurs de commande directionnels — Spécification de l'affectation des broches des connecteurs électriques ronds de diamètres 8 mm et 12 mm — Rectificatif technique 1,2005-08-18,1,['23.100.50'],ISO/TC 131/SC 5,9599,,[67812],"['en','fr']",1,

6817,IS,,ISO 2041:1975,Vibration and shock — Vocabulary,Vibrations et chocs — Vocabulaire,1975-08-01,1,"['01.040.17','17.160']",ISO/TC 108,9599,,[6818],"['en','fr']",53,

6818,IS,,ISO 2041:1990,Vibration and shock — Vocabulary,Vibrations et chocs — Vocabulaire,1990-08-23,2,"['01.040.17','17.160']",ISO/TC 108,9599,[6817],"[30404,35848]","['en','fr']",59,<p>Defines terms in English and French. An alphabetical index is provided for each of the two languages.</p>

35848,IS,,ISO 2041:2009,"Mechanical vibration, shock and condition monitoring — Vocabulary","Vibrations et chocs mécaniques, et leur surveillance — Vocabulaire",2009-07-17,3,"['01.040.17','17.160']",ISO/TC 108,9599,[6818],[68734],"['en','ru']",46,"<p>ISO 2041:2009 defines terms and expressions unique to the areas of mechanical vibration, shock and condition monitoring. </p>"

67943,IS,,ISO 20417:2021,Medical devices — Information to be supplied by the manufacturer,Dispositifs médicaux — Informations à fournir par le fabricant,2021-04-13,1,['11.040.01'],ISO/TC 210,9599,,[88714],"['en','fr']",72,"<p>NOTE 1 There is guidance or rationale for this Clause contained in Clause A.2.</p><p>This document specifies the requirements for <em>information supplied by the manufacturer</em> for a <em>medical device</em> or by the<em> manufacturer</em> for an <em>accessory</em>, as defined in 3.1. This document includes the generally applicable requirements for identification and <em>labels</em> on a <em>medical device</em> or <em>accessory</em>, the packaging, <em>marking<

34176,IS,,ISO 20421-1:2006,"Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 1: Design, fabrication, inspection and testing","Récipients cryogéniques — Récipients transportables isolés sous vide de grande contenance — Partie 1: Conception, fabrication, inspection et essais",2006-04-19,1,['23.020.40'],ISO/TC 220,9599,,[68589],['en'],122,"<p>ISO 20421-1:2006 specifies requirements for the design, fabrication, inspection and testing of large transportable vacuum insulated cryogenic vessels of more than 450 l volume, which are permanently (fixed tanks) or not permanently (demountable tanks and portable tanks) attached to a means of transport, for one or more modes of tran

46406,IS,Cor,ISO 20421-1:2006/Cor 1:2007,"Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 1: Design, fabrication, inspection and testing — Technical Corrigendum 1","Récipients cryogéniques — Récipients transportables isolés sous vide de grande contenance — Partie 1: Conception, fabrication, inspection et essais — Rectificatif technique 1",2007-07-23,1,['23.020.40'],ISO/TC 220,9599,,[68589],['en'],2,

34488,IS,,ISO 20421-2:2005,Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 2: Operational requirements,"Récipients cryogéniques — Grands récipients transportables, isolés, sous vide — Partie 2: Exigences de fonctionnement",2005-06-29,1,['23.020.40'],ISO/TC 220,9599,,[56920],['en'],13,"<p>ISO 20421-2:2005 specifies operational requirements for large transportable vacuum insulated cryogenic vessels of more than 1 000 l volume.</p><p>The scope includes putting into service, filling, withdrawal, transport within the location, storage, maintenance, periodic inspection and emergency procedures.</p>"

80236,IS,,ISO 20427:2023,Pigments and extenders — Dispersion procedure for sedimentation-based particle sizing of suspended pigment or extender with liquid sedimentation methods,Pigments et matières de charge — Mode opératoire de dispersion pour la détermination granulométrique basée sur la sédimentation des pigments ou matières de charge en suspension par des méthodes de sédimentation dans un liquide,2023-11-21,1,['87.060.10'],ISO/TC 256,9599,,[90660],"['en','fr']",22,"<p class='MsoBodyText'><span lang='EN-GB'>This document specifies sample preparation methods to determine the size distribution of separate particles of a single pigment or extender, which is dispersed in a liquid by applicat

6820,IS,,ISO 2043:1974,Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure — Oven test,"Raccords moulés en polychlorure de vinyle (PVC) non plastifié, pour emboîtements à bagues d'étanchéité, pour canalisations avec pression — Essai à l'étuve",1974-05-01,1,['23.040.45'],ISO/TC 138,9599,,[4676],"['en','fr']",1,

39424,IS,,ISO 20433:2005,Leather — Tests for colour fastness — Colour fastness to crocking,Cuir — Essais de solidité des teintures — Solidité des teintures au frottement avec abrasion,2005-07-26,1,['59.140.30'],IULTCS,9599,,[54448],['en'],5,"<p>ISO 20433:2005 specifies a method for determining the amount of colour transferred from the surface of coloured leather to other surfaces by rubbing.</p><p>Two tests are carried out, one with a dry rubbing cloth and one with a wet rubbing cloth.</p><p>The method is applicable to all types of coloured leather. Since after-treatments of the leather as well as surface finishes can affect the degree of colour transfer, the test can be made before and/or a

54448,IS,,ISO 20433:2012,Leather — Tests for colour fastness — Colour fastness to crocking,Cuir — Essais de solidité des coloris — Solidité des coloris au dégorgement par frottement,2012-09-24,2,['59.140.30'],IULTCS,9599,[39424],[86793],"['en','fr']",5,"<p>This International Standard specifies a method for determining the amount of colour transferred from the surface of coloured leather to other surfaces by rubbing with a white cotton cloth. </p><p>Two tests are carried out, one with a dry rubbing cloth and one with a wet rubbing cloth. </p><p>The method is applicable to all types of coloured leather. Since after treatments of the leather as well as surface finishes can affect the degree of

6822,IS,,ISO 2045:1973,Single sockets for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement,Emboîtures simples pour tubes pression en polychlorure de vinyle (PVC) non plastifié avec joints d'étanchéité élastiques — Profondeurs minimales d'emboîture,1973-04-01,1,['23.040.45'],ISO/TC 138,9599,,[6823],"['en','fr']",1,

6823,IS,,ISO 2045:1988,Single sockets for unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement,Emboîtures simples pour tubes pression en poly(chlorure de vinyle) non plastifié (PVC-U) et en poly(chlorure de vinyle) chloré (PVC-C) avec joints d'étanchéité élastiques — Profondeurs minimales d'emboîture,1988-05-19,2,['23.040.45'],ISO/TC 138/SC 2,9599,[6822],"[50362,50363]","['en','fr']",1,"<p>Specification of minimum depth of engagement for single socket joints with elastic sealing rings for the transport of fluids and for pipes up to 12 m in length in situations, where change

38334,IS,,ISO 20462-3:2005,Photography — Psychophysical experimental methods for estimating image quality — Part 3: Quality ruler method,Photographie — Méthodes psychophysiques expérimentales pour estimer la qualité d'image — Partie 3: Méthode <<quality ruler>>,2005-11-10,1,['37.040.01'],ISO/TC 42,9599,,[54617],['en'],24,"<p>ISO 20462-3:2005 specifies: the nature of a quality ruler; hardcopy and softcopy implementations of quality rulers; how quality rulers may be generated or obtained; and the standard quality scale (SQS), a fixed numerical scale that may be measured using quality rulers. </p>"

41023,IS,,ISO 20474-1:2008,Earth-moving machinery — Safety — Part 1: General requirements,Engins de terrassement — Sécurité — Partie 1: Exigences générales,2008-12-08,1,['53.100'],ISO/TC 127/SC 2,9599,,[60734],"['en','fr']",22,"<p>ISO 20474-1:2008 specifies the general safety requirements for earth-moving machinery as defined in ISO 6165, excepting horizontal directional drills (see EN 791), each of these requirements being common to two or more earth‑moving machine families. It is also applicable to machine attachments, and to derivated machinery designed primarily for equipment used to loosen, pick-up, move, transport and/or distribute earth, or to grade earth and rock. </p><p>It is intend

41394,IS,,ISO 20474-10:2008,Earth-moving machinery — Safety — Part 10: Requirements for trenchers,Engins de terrassement — Sécurité — Partie 10: Exigences applicables aux trancheuses,2008-12-08,1,['53.100'],ISO/TC 127/SC 2,9599,,[60743],"['en','fr']",8,"<p>ISO 20474-10:2008 gives the safety requirements specific to trenchers as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474-1, which specifies general safety requirements common to earth‑moving machine families, and with ISO/TS 20474-14, which gives information on provisions that are mandatory in particular countries or regions. The specific requirements given in ISO 20474-10:2008 take precedence over the general

41395,IS,,ISO 20474-11:2008,Earth-moving machinery — Safety — Part 11: Requirements for earth and landfill compactors,Engins de terrassement — Sécurité — Partie 11: Exigences applicables aux compacteurs de remblais et de déchets,2008-12-08,1,['53.100'],ISO/TC 127/SC 2,9599,,[60744],"['en','fr']",5,"<p>ISO 20474-11:2008 gives the safety requirements specific to earth and landfill compactors as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474-1, which specifies general safety requirements common to earth‑moving machine families, and with ISO/TS 20474-14, which gives information on provisions that are mandatory in particular countries or regions. The specific require

41396,IS,,ISO 20474-12:2008,Earth-moving machinery — Safety — Part 12: Requirements for cable excavators,Engins de terrassement — Sécurité — Partie 12: Exigences applicables aux pelles à câble,2008-12-08,1,['53.100'],ISO/TC 127/SC 2,9599,,[60745],"['en','fr']",15,"<p>ISO 20474-12:2008 gives the safety requirements specific to cable excavators as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474-1, which specifies general safety requirements common to earth‑moving machine families, and with ISO/TS 20474-14, which gives information on provisions that are mandatory in particular countries or regions. The specific requirements given in ISO 20474-12:2008 take precedence

43625,IS,,ISO 20474-13:2008,Earth-moving machinery — Safety — Part 13: Requirements for rollers,Engins de terrassement — Sécurité — Partie 13: Exigences applicables aux compacteurs,2008-12-08,1,['53.100'],ISO/TC 127/SC 2,9599,,[60746],"['en','fr']",21,"<p>ISO 20474-13:2008 gives the safety requirements specific to rollers as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474-1, which specifies general safety requirements common to earth‑moving machine families, and with ISO/TS 20474-14, which gives information on provisions that are mandatory in particular countries or regions. The specific requirements given in ISO 20474-13:2008 take precedence over the general req

41386,IS,,ISO 20474-2:2008,Earth-moving machinery — Safety — Part 2: Requirements for tractor-dozers,Engins de terrassement — Sécurité — Partie 2: Exigences applicables aux bouteurs,2008-12-08,1,['53.100'],ISO/TC 127/SC 2,9599,,[60737],"['en','fr']",5,"<p>ISO 20474-2:2008 gives the safety requirements specific to wheeled and crawler tractor-dozers as defined in ISO 6165, as well as those for rear-mounted winches on dozers. It is intended to be used in conjunction with ISO 20474-1, which specifies general safety requirements common to earth-moving machine families, and with ISO/TR 20474-14, which gives information on provisions that are mandatory in particular countries or regions. The specif

41387,IS,,ISO 20474-3:2008,Earth-moving machinery — Safety — Part 3: Requirements for loaders,Engins de terrassement — Sécurité — Partie 3: Exigences applicables aux chargeuses,2008-12-08,1,['53.100'],ISO/TC 127/SC 2,9599,,[60735],"['en','fr']",9,"<p>ISO 20474-3:2008 gives the safety requirements specific to loaders as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474-1, which specifies general safety requirements common to earth-moving machine families, and with ISO/TS 20474-14, which gives information on provisions that are mandatory in particular countries or regions. The specific requirements given in ISO 20474-3:2008 take precedence over the general requiremen

41388,IS,,ISO 20474-4:2008,Earth-moving machinery — Safety — Part 4: Requirements for backhoe-loaders,Engins de terrassement — Sécurité — Partie 4: Exigences applicables aux chargeuses-pelleteuses,2008-12-08,1,['53.100'],ISO/TC 127/SC 2,9599,,[60736],"['en','fr']",14,"<p>ISO 20474-4:2008 gives the safety requirements specific to wheeled and crawler backhoe loaders as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474-1, which specifies general safety requirements common to earth-moving machine families, and with ISO/TS 20474-14, which gives information on provisions that are mandatory in particular countries or regions. The specific requirements given in ISO 20474-4