Withdrawn and superseded ISO standards — page 72 of 246

34004,IS,,ISO 19932-1:2006,Equipment for crop protection — Knapsack sprayers — Part 1: Requirements and test methods,Matériel de protection des cultures — Pulvérisateurs à dos — Partie 1: Exigences et méthodes d'essai,2006-03-17,1,['65.060.40'],ISO/TC 23/SC 6,9599,,"[56032,56031]","['en','fr']",17,"<p>ISO 19932-1:2006 specifies the requirements and test methods for manually operated knapsack sprayers with a nominal tank volume of 5 l or more. It is applicable to lever-operated knapsack sprayers and knapsack compression sprayers for their intended use in, for example, agriculture and horticulture.</p>"

56031,IS,,ISO 19932-1:2013,Equipment for crop protection — Knapsack sprayers — Part 1: Safety and environmental requirements,Matériel de protection des cultures — Pulvérisateurs à dos — Partie 1: Exigences environnementales et de sécurité,2013-05-27,2,['65.060.40'],ISO/TC 23/SC 6,9599,"[37075,34004]","[83796,70599]","['en','fr']",17,"<p>ISO 19932-1:2013 specifies the safety and environmental requirements and their means of verification for the design and construction of knapsack sprayers carried on the back or shoulder of the operator for use with plant protection products. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided b

37075,IS,,ISO 19932-2:2006,Equipment for crop protection — Knapsack sprayers — Part 2: Performance limits,Matériel de protection des cultures — Pulvérisateurs à dos — Partie 2: Limites de performance,2006-03-17,1,['65.060.40'],ISO/TC 23/SC 6,9599,,"[56032,56031]","['en','fr']",4,"<p>ISO 19932:2006 specifies the minimum performance limits for manually operated-knapsack sprayers with a nominal spray tank volume of 5 l or more. It is applicable to lever-operated knapsack sprayers and knapsack compression sprayers for their intended use in, for example, agriculture and horticulture.</p>"

56032,IS,,ISO 19932-2:2013,Equipment for crop protection — Knapsack sprayers — Part 2: Test methods,Matériel de protection des cultures — Pulvérisateurs à dos — Partie 2: Méthodes d'essai,2013-05-27,2,['65.060.40'],ISO/TC 23/SC 6,9599,"[37075,34004]","[83797,70600]","['en','fr']",22,"<p>ISO 19932-2:2013 specifies test methods for the verification of requirements of ISO 19932-1:2013 for knapsack sprayers carried on the back or shoulder of the operator for use with plant protection products.</p><p>It is applicable to lever-operated knapsack sprayers, knapsack compression sprayers and knapsack sprayers driven by an engine or electric motor using hydraulic pressure atomisation of the spray liqui

71529,IS,,ISO 19935-2:2020,Plastics — Temperature modulated DSC — Part 2: Measurement of specific heat capacity cp,Plastiques — DSC à température modulée — Partie 2: Mesurage précis de la chaleur spécifique cp,2020-09-23,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[93461],['en'],14,"<p>This document establishes a method for measurement of specific heat capacity, <i>c</i>_p, using temperature modulated differential scanning calorimetry.</p>"

34011,IS,,ISO 19952:2005,Footwear — Vocabulary,Chaussures — Vocabulaire,2005-06-07,1,"['61.060','01.040.61']",ISO/TC 216,9599,,[84291],"['en','fr']",84,"<p>ISO 19952:2005 defines terms used in the footwear industry, in English, French, Spanish and Italian. The terms and their definitions are listed alphabetically in English.</p><p>In the annexes, all the terms are listed alphabetically in English, French, Spanish and Italian, so that the user of this International Standard can easily find the corresponding definition and the equivalent terms in the different languages.</p><p>ISO 19952:2005 is intended to facilitate communication in the footwear sector.</p>"

34016,IS,,ISO 19957:2004,Footwear — Test methods for heels — Heel pin holding strength,Chaussures — Méthodes d'essai relatives aux talons — Résistance à l'arrachement de pointe à talon,2004-09-16,1,['61.060'],ISO/TC 216,9599,,[77593],"['en','fr']",5,"<p>ISO 19957:2004 specifies a test method for measuring the force required to pull a single heel pin out of a heel. This test method can be used to measure the heel pin holding strength of heel materials by using a standard heel pin and a method of insertion, or it can be used to assess the heel nailing in commercial production.</p><p>This test method is applicable to testing plastic heels and wooden heels for women's footwear. Heels composed of

42232,IS,Cor,ISO 19957:2004/Cor 1:2005,Footwear — Test methods for heels — Heel pin holding strength — Technical Corrigendum 1,Chaussures — Méthodes d'essai relatives aux talons — Résistance à l'arrachement de pointe à talon — Rectificatif technique 1,2005-05-13,1,['61.060'],ISO/TC 216,9599,,[77593],"['en','fr']",2,

34022,IS,,ISO 19959:2005,"Visual examination of the surface condition of investment castings — Steel, nickel alloys and cobalt alloys","Examen visuel de l'état de surface des pièces moulées par le procédé dit 'à la cire perdue' — Acier, alliages de nickel et alliages de cobalt",2005-04-08,1,['77.140.80'],ISO/TC 17/SC 11,9599,,[73046],"['en','fr']",3,"<p>ISO 19959:2005 specifies the acceptance criteria for the surface inspection of steel, nickel alloy and cobalt alloy investment castings by visual examination.</p>"

6748,IS,,ISO 1996-1:1982,Acoustics — Description and measurement of environmental noise — Part 1: Basic quantities and procedures,Acoustique — Caractérisation et mesurage du bruit de l'environnement — Partie 1: Grandeurs et méthodes fondamentales,1982-09-01,1,['13.140'],ISO/TC 43/SC 1,9599,[6746],"[41860,28633]","['en','fr']",5,<p>Defines basic measures to be used for the description of noise in communitiy environments and describes basic methods for the determination or these measures. Does not specify noise limits.</p>

28633,IS,,ISO 1996-1:2003,"Acoustics — Description, measurement and assessment of environmental noise — Part 1: Basic quantities and assessment procedures","Acoustique — Description, mesurage et évaluation du bruit de l'environnement — Partie 1: Grandeurs fondamentales et méthodes d'évaluation",2003-08-11,2,['13.140'],ISO/TC 43/SC 1,9599,"[23776,6749,6750,6748]",[59765],"['en','fr']",26,"<p>ISO 1996-1:2003 defines the basic quantities to be used for the description of noise in community environments and describes basic assessment procedures. It also specifies methods to assess environmental noise and gives guidance on predicting the potential annoyance response of a community to long-term e

6749,IS,,ISO 1996-2:1987,Acoustics — Description and measurement of environmental noise — Part 2: Acquisition of data pertinent to land use,Acoustique — Caractérisation et mesurage du bruit de l'environnement — Partie 2: Saisie des données pertinentes pour l'utilisation des sols,1987-04-16,1,['13.140'],ISO/TC 43/SC 1,9599,[6746],"[41860,28633]","['en','fr']",7,"<p>Describes methods for measuring and describing noise of the environment relevant to a specified area, existing or planned. Does not give guidance on the estimation of the overall uncertainty of the results. Noes not specify noise limits.</p>"

23776,IS,Amd,ISO 1996-2:1987/Amd 1:1998,Acoustics — Description and measurement of environmental noise — Part 2: Acquisition of data pertinent to land use — Amendment 1,Acoustique — Caractérisation et mesurage du bruit de l'environnement — Partie 2: Saisie des données pertinentes pour l'utilisation des sols — Amendement 1,1998-09-17,1,['13.140'],ISO/TC 43/SC 1,9599,,"[41860,28633]","['en','fr']",8,

41860,IS,,ISO 1996-2:2007,"Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of environmental noise levels","Acoustique — Description, évaluation et mesurage du bruit de l'environnement — Partie 2: Détermination des niveaux de bruit de l'environnement",2007-03-09,2,"['17.140.01','13.140']",ISO/TC 43/SC 1,9599,"[23776,6749,6750,6748]",[59766],['en'],40,"<p>ISO 1996-2:2007 describes how sound pressure levels can be determined by direct measurement, by extrapolation of measurement results by means of calculation, or exclusively by calculation, intended as a basis for assessing environmental noise. Recommendations are given regarding preferable co

6750,IS,,ISO 1996-3:1987,Acoustics — Description and measurement of environmental noise — Part 3: Application to noise limits,Acoustique — Caractérisation et mesurage du bruit de l'environnement — Partie 3: Application aux limites de bruit,1987-12-10,1,['13.140'],ISO/TC 43/SC 1,9599,[6746],"[41860,28633,31827]","['en','fr']",3,<p>Lays down guidelines for the specification of limits of noise and describes methods for the acquisition of data that enable specific noise situations to be checked for compliance with specified limits of noise.</p>

34023,IS,,ISO 19960:2005,Cast steels and alloys with special physical properties,Aciers et alliages moulés avec caractéristiques physiques particulières,2005-04-20,1,['77.140.80'],ISO/TC 17/SC 11,9599,,[59279],"['en','fr']",6,"<p>ISO 19960:2005 specifies cast steel and alloy grades with special physical properties. The cast steel and alloy grades covered by this International Standard are used in applications which require low linear thermal expansion, or low ferromagnetic responses, or low galling properties.</p>"

59279,IS,,ISO 19960:2015,Cast steels and alloys with special physical properties,Aciers et alliages moulés avec caractéristiques physiques particulières,2015-09-08,2,['77.140.80'],ISO/TC 17/SC 11,9599,[34023],[84509],['en'],7,"<p>ISO 19960:2015 specifies cast steel and alloy grades with special physical properties. The cast steel and alloy grades covered by this International Standard are used in applications which require low linear thermal expansion, or low ferromagnetic responses, or low galling properties.</p><p>NOTE Annex A gives information on ISO grade designation and available UNS numbers which are similar to the ISO grade designations.</p>"

71635,IS,,ISO 19967-2:2019,Heat pump water heaters — Testing and rating for performance — Part 2: Heat pump water heaters for space heating,Chauffe-eau à pompe à chaleur — Essais et classification des performances — Partie 2: Chauffe-eau à pompe à chaleur pour le chauffage des locaux,2019-06-19,1,['27.080'],ISO/TC 86/SC 6,9599,,[83678],['en'],25,"<p>This document specifies test conditions and test procedures for determining the performance characteristics of air source heat pump water heaters for space heating with electrically driven compressors with or without supplementary heater. The purpose of this document is to rate the performance of the heat pump water heaters for space heating with

6751,IS,,ISO 1997:1972,Granulated cork and cork powder — Specifications,Granulés crus et poudre de liège — Spécifications,1972-03-01,1,['79.100'],ISO/TC 87,9599,,[6752],"['en','fr']",2,

6752,IS,,ISO 1997:1992,"Granulated cork and cork powder — Classification, properties and packing","Granulés crus et poudre de liège — Classification, caractéristiques et emballage",1992-11-25,2,['79.100'],ISO/TC 87,9599,[6751],"[73876,29868]","['en','fr']",2,"<p>Specifies classification by grain size, classification by bulk density, designation, moisture, cork powder content, packing in bales, sacks or cartons, marking.</p>"

66774,IS,,ISO 19970:2017,Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — Metering of gas as fuel on LNG carriers during cargo transfer operations,Hydrocarbures réfrigérés et combustibles gazeux liquéfiés à base non pétrolière — Mesurage du gaz comme carburant sur les transporteurs de GNL pendant les opération de transfert de cargaison,2017-05-24,1,['75.180.30'],ISO/TC 28/SC 5,9599,,[86650],['en'],10,"<p>ISO 19970:2017 specifies minimum requirements to quantify the boil-off gas (BOG) consumed on liquefied natural gas (LNG) carriers for their own functions, notably for power generation, during cargo transfer operations. BOG in this document refers to the low molecula

39193,IS,,ISO 19973-1:2007,Pneumatic fluid power — Assessment of component reliability by testing — Part 1: General procedures,Transmissions pneumatiques — Évaluation par essais de la fiabilité des composants — Partie 1: Procédures générales,2007-07-30,1,['23.100.01'],ISO/TC 131,9599,,[62570],['en'],31,"<p>ISO 19973-1:2007 provides general procedures, the calculation method for assessing the reliability of pneumatic fluid power components and the methods of reporting. These procedures are independent of the kinds of components and of their design.</p><p>ISO 19973-1:2007 also provides general test conditions and a method for data evaluation.</p><p>Because the service life of any component is

39194,IS,,ISO 19973-2:2007,Pneumatic fluid power — Assessment of component reliability by testing — Part 2: Directional control valves,Transmissions pneumatiques — Évaluation par essais de la fiabilité des composants — Partie 2: Distributeurs,2007-07-30,1,['23.100.01'],ISO/TC 131,9599,,[62571],['en'],13,"<p>ISO 19973-2:2007 provides test procedures for determining the reliability of pneumatic directional control valves by testing and the methods of reporting the results of testing according to the general test conditions and the calculation method provided in ISO 19973-1.</p><p>The lifetime of pneumatic and electro-pneumatic directional control valves is usually given as a number of cycles.

39195,IS,,ISO 19973-3:2007,Pneumatic fluid power — Assessment of component reliability by testing — Part 3: Cylinders with piston rod,Transmissions pneumatiques — Évaluation par essais de la fiabilité des composants — Partie 3: Vérins avec tiges de piston,2007-07-30,1,['23.100.01'],ISO/TC 131,9599,,[62572],['en'],8,"<p>ISO19973-3:2007 provides test procedures for determining reliability of pneumatic cylinders with piston rod by testing and the methods of reporting the results of testing. The general test conditions and the calculation method provided in Part 1 of ISO 19973 apply to the first failure without repairs, but exclude outliers.</p><p>The lifetime of pneumatic cylinders is usually g

40620,IS,,ISO 19973-4:2007,Pneumatic fluid power — Assessment of component reliability by testing — Part 4: Pressure regulators,Transmissions pneumatiques — Évaluation par essais de la fiabilité des composants — Partie 4: Régulateurs de pression,2007-07-30,1,['23.100.01'],ISO/TC 131,9599,,[54826],['en'],8,"<p>ISO 19973-4:2007 provides test procedures for assessing the reliability of pneumatic pressure regulators by testing and the methods of reporting the results of testing. General test conditions and the calculation method are provided in ISO 19973-1. The methods specified in ISO 19973-1 apply to the first failure without repairs, but exclude outliers.</p><p>ISO 19973-4:2007 applies to man

6753,IS,,ISO 1998-1:1974,Petroleum industry — Vocabulary,Industrie pétrolière — Vocabulaire,1974-12-01,1,"['01.040.75','75.080']",ISO/TC 28,9599,,"[25408,25405,25406,23185,25402,25403,25407,25404]","['en','fr','ru']",19,

6755,IS,,ISO 1998-2:1976,Petroleum industry — Vocabulary,Industrie pétrolière — Vocabulaire,1976-12-01,1,"['01.040.75','75.080']",ISO/TC 28,9599,,"[25408,25405,25406,23185,25402,25403,25407,25404]","['en','fr','ru']",18,

34049,IS,,ISO 19980:2005,Ophthalmic instruments — Corneal topographers,Instruments ophtalmiques — Topographes de la cornée,2005-08-24,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[54972],['en'],24,"<p>ISO 19980:2005 is applicable to instruments, systems and methods that are intended to measure the surface shape of the cornea of the human eye.</p><p>It is not applicable to ophthalmic instruments classified as ophthalmometers.</p><p>ISO 19980:2005 defines certain terms that are specific to the characterization of the corneal shape so that they may be standardized throughout the field of vision care and have common meaning for all those who have occasion to participate in this area.</p><p>ISO 19980:20

54972,IS,,ISO 19980:2012,Ophthalmic instruments — Corneal topographers,Instruments ophtalmiques — Topographes de la cornée,2012-03-29,2,['11.040.70'],ISO/TC 172/SC 7,9599,[34049],[75922],"['en','fr']",22,"<p>This International Standard specifies minimum requirements for instruments and systems that fall into the class of corneal topographers (CTs). It also specifies tests and procedures to verify that a system or instrument complies with this International Standard and thus qualifies as a CT according to this International Standard. It also specifies tests and procedures that allow the verification of capabilities of systems that are beyond the minimum requirements for CTs.</p><p>This Intern

66785,IS,,ISO 19983:2017,Rubber — Determination of precision of test methods,Caoutchouc — Détermination de la fidélité des méthodes d'essai,2017-07-14,1,['83.060'],ISO/TC 45/SC 2,9599,[36984],[77431],"['en','fr']",21,<p>ISO 19983:2017 provides guidelines and specifies requirements for estimating the precision of rubber test methods by means of interlaboratory test programmes based on the procedures given in ISO 5725 (all parts).</p>

77431,IS,,ISO 19983:2022,Rubber — Determination of precision of test methods,Caoutchouc — Détermination de la fidélité des méthodes d'essai,2022-06-30,2,['83.060'],ISO/TC 45/SC 2,9599,[66785],[86604],"['en','fr']",31,<p>This document provides guidelines and specifies requirements for estimating the precision of rubber test methods by means of interlaboratory test programmes based on the procedures given in:</p><p>— Method A using ISO 5725 (all parts);</p><p>— Method B using ASTM D4483</p>

66787,IS,,ISO 19984-2:2017,Rubber and rubber products — Determination of biobased content — Part 2: Biobased carbon content,Élastomères et produits à base d'élastomères — Détermination de la teneur en composés biosourcés — Partie 2: Teneur en carbone biosourcé,2017-08-14,1,['83.060'],ISO/TC 45/SC 2,9599,,[86606],['en'],21,"<p>ISO 19984-2:2017 specifies measuring methods for the determination of biobased carbon contents in rubber and rubber products, including polyurethanes. The methods focus on carbon atoms in rubber or rubber products, and determine whether the carbon-containing component is biobased or not judging from the concentration of ¹⁴C, radiocarbon isotope.</p><p>ISO 199

6758,IS,,ISO 1999:1975,Acoustics — Assessment of occupational noise exposure for hearing conservation purposes,Acoustique — Estimation de l'exposition au bruit durant le travail en vue de la protection de l'audition,1975-08-01,1,['13.140'],ISO/TC 43,9599,[56849],[6759],"['en','fr']",6,

6759,IS,,ISO 1999:1990,Acoustics — Determination of occupational noise exposure and estimation of noise-induced hearing impairment,Acoustique — Détermination de l'exposition au bruit en milieu professionnel et estimation du dommage auditif induit par le bruit,1990-01-18,2,['13.140'],ISO/TC 43/SC 1,9599,[6758],[45103],"['en','fr']",17,"<p>Prescribes a practical relation for these quanitities expressed as A-weighted noise level in dB and duration of exposure within a normal working week (40 hours) and the percentage of personnel that is to be expected to obtain a raised hearing threshold of 25 dB or more as a result of this exposure, averaged from 500, 1000 and 2000 Hz.</p>"

39202,IS,,ISO 19993:2007,Timber structures — Glued laminated timber — Face and edge joint cleavage test,Structures en bois — Bois lamellé-collé — Essai de fendage des joints face à face et longitudinaux,2007-10-30,1,['91.080.20'],ISO/TC 165,9599,,[74543],['en'],5,"<p>ISO 19993:2007 specifies methods of evaluating the effectiveness of glued, laminated timber-face and edge bonds within a manufacturing plant by cleaving of the glue line in both dry and wet conditions.</p>"

6760,IS,,ISO 2000:1978,"Rubber, natural (NR) — Specifications",Caoutchouc naturel (NR) — Spécifications,1978-05-01,4,['83.060'],ISO/TC 45,9599,,[6761],"['en','fr']",1,

6761,IS,,ISO 2000:1989,"Rubber, raw natural — Specification",Caoutchouc naturel brut — Spécifications,1989-07-13,5,['83.040.10'],ISO/TC 45/SC 3,9599,[6760],"[24580,38922]","['en','fr']",2,<p>Specifies the minimum quality requirements and the corresponding methods of test for six grades of raw natural rubber. A table delivers the maximum dirt content and some other characteristics for these grades.</p>

38922,IS,,ISO 2000:2003,"Rubber, raw natural — Guidelines for the specification of technically specified rubber (TSR)",Caoutchouc naturel brut — Lignes directrices pour la spécification de caoutchoucs spécifiés techniquement (TSR),2003-12-11,6,['83.040.10'],ISO/TC 45/SC 3,9599,[6761],[51091],"['en','fr']",3,"<p>ISO 2000:2003 provides guidance on the specification of technically specified rubber (TSR). A grading system is proposed, based on the origin of the natural rubber content and on properties exhibited by the rubber.</p><p>This International Standard is intended for use by parties involved in the procurement of TSR, and is intended to form a basis from which requirements for a particula

51091,IS,,ISO 2000:2014,"Rubber, raw natural — Guidelines for the specification of technically specified rubber (TSR)",Caoutchouc naturel brut — Lignes directrices pour la spécification de caoutchoucs spécifiés techniquement (TSR),2014-05-26,7,['83.040.10'],ISO/TC 45/SC 3,9599,[38922],[78875],"['en','fr']",4,"<p>ISO 2000:2014 provides guidance on the specification of technically specified rubber (TSR). A grading system is proposed, based on the origin of the natural rubber content and on properties exhibited by the rubber.</p><p>ISO 2000:2014 is intended for use by parties involved in the procurement of TSR, and is intended to form a basis from which requirements for a particular case may be

21075,IS,,ISO 20019:2001,Agricultural vehicles — Mechanical connections on towed vehicles — Dimensions for hitch rings,Véhicules agricoles — Liaisons mécaniques sur véhicules remorqués — Dimensions des anneaux d'attelage,2001-07-12,1,['65.060.10'],ISO/TC 23/SC 4,9599,[11805],"[90392,83075]","['en','fr']",5,"<p>This International Standard specifies dimensional requirements for the attachment of agricultural, non-balanced</p><p>trailers and implements by means of hitch rings to the rear of towing vehicles equipped with a hook specified in ISO</p><p>6489-1. Its purpose is to ensure the interchangeability of the mechanical connections on agricultural towed</p><p>vehicles.</p><p>This Internationa

41099,IS,Cor,ISO 20019:2001/Cor 1:2004,Agricultural vehicles — Mechanical connections on towed vehicles — Dimensions for hitch rings — Technical Corrigendum 1,Véhicules agricoles — Liaisons mécaniques sur véhicules remorqués — Dimensions des anneaux d'attelage — Rectificatif technique 1,2004-09-27,1,['65.060.10'],ISO/TC 23/SC 4,9599,,"[90392,83075]","['en','fr']",2,

6762,IS,,ISO 2002:1975,Raw styrene-butadiene rubber (SBR) — Determination of organic acid content,Butadiène-styrène (SBR) brut — Dosage des acides organiques,1975-02-01,1,['83.040.10'],ISO/TC 45,9599,,[14662],['en'],2,

40337,IS,,ISO 20022-1:2004,Financial services — UNIversal Financial Industry message scheme — Part 1: Overall methodology and format specifications for inputs to and outputs from the ISO 20022 Repository,Services financiers — Schéma universel de messages pour l'industrie financière — Partie 1: Méthodologie globale et spécifications pour le format de soumission et de publication du Référentiel ISO 20022,2004-12-02,1,['03.060'],ISO/TC 68,9599,,[55005],['en'],23,<p>ISO 20022-1:2005 consists of the overall description of the modelling approach; the overall description of the ISO 20022 Repository contents; a high-level description of the input to be accepted by the Registration Authority to feed/

55005,IS,,ISO 20022-1:2013,Financial services — Universal financial industry message scheme — Part 1: Metamodel,Services financiers — Schéma universel de messages pour l'industrie financière — Partie 1: Métamodèle,2013-05-07,2,['03.060'],ISO/TC 68/SC 9,9599,[40337],[84854],['en'],152,"<p>ISO 20022-1:2013 consists of:</p><ul><li> the overall description of the modelling approach;</li><li> the overall description of the ISO 20022 Repository contents;</li><li> a high-level description of the input to be accepted by the Registration Authority to feed/modify the Repository's DataDictionary and BusinessProcessCatalogue;</li><li> a high-level description of the Repository ou

40378,IS,,ISO 20022-2:2004,Financial services — UNIversal Financial Industry message scheme — Part 2: Roles and responsibilities of the registration bodies,Services financiers — Schéma universel de messages pour l'industrie financière — Partie 2: Rôles et responsabilités des organismes d'enregistrement,2004-12-02,1,['03.060'],ISO/TC 68,9599,,[44898],['en'],14,"<p>ISO 20022-2:2004 specifies the responsibilities of the bodies involved in the registration and maintenance of the Data Dictionary and Business Process Catalogue items in the ISO 20022 Repository. The Registration Authority (RA) is the operating authority responsible for the above-mentioned tasks, and is assisted by different Standar

44898,IS,,ISO 20022-2:2007,Financial services — UNIversal Financial Industry message scheme — Part 2: Roles and responsibilities of the registration bodies,Services financiers — Schéma universel de messages pour l'industrie financière — Partie 2: Rôles et responsabilités des organismes d'enregistrement,2007-04-04,2,['03.060'],ISO/TC 68,9599,[40378],[55006],['en'],16,"<p>ISO 20022-2:2007 specifies the responsibilities of the bodies involved in the registration and maintenance of the ISO 20022 Repository. The Registration Authority (RA) is the operating authority responsible for the above-mentioned tasks and is assisted by different Standards Evaluation Groups (SEGs), i.e. groups of industry e

55007,IS,,ISO 20022-3:2013,Financial services — Universal financial industry message scheme — Part 3: Modelling,Services financiers — Schéma universel de messages pour l'industrie financière — Partie 3: Modélisation,2013-05-07,1,['03.060'],ISO/TC 68/SC 9,9599,[41127],[84856],['en'],24,"<p>ISO 20022-3:2013 describes the modelling workflow, complementing ISO 20022-1:2013 and ISO 20022-2:2013. The modelling workflow describes the required steps a modeller follows in order to develop and maintain standardized BusinessTransactions and MessageSets.</p><p>ISO 20022-3:2013 is not intended to describe what will be the permissible artefacts and/or documents to be submitted to the Registration Authorit

55008,IS,,ISO 20022-4:2013,Financial services — Universal financial industry message scheme — Part 4: XML Schema generation,Services financiers — Schéma universel de messages pour l'industrie financière — Partie 4: Génération de schéma XML,2013-05-07,1,['03.060'],ISO/TC 68/SC 9,9599,[41128],[84857],['en'],22,"<p>ISO 20022-4:2013 was prepared to complement the ISO 20022 Metamodel, as specified in ISO 20022-1:2013, with the XML syntax transformation rules to be applied by the ISO 20022 Registration Authority in order to translate an ISO 20022 compliant MessageDefinition into an XML Schema for the description and validation of XML Messages. </p><p>It specifies the transformation rules from leve

55009,IS,,ISO 20022-5:2013,Financial services — Universal financial industry message scheme — Part 5: Reverse engineering,Services financiers — Schéma universel de messages pour l'industrie financière — Partie 5: Ingénierie inverse,2013-05-07,1,['03.060'],ISO/TC 68/SC 9,9599,[41130],[84858],['en'],36,"<p>ISO 20022-5:2013 was prepared to complement ISO 20022-1:2013. The reverse engineering guidelines explain how to extract relevant information from existing IndustryMessageSets in order to prepare the submission to the ISO 20022 Registration Authority of equivalent, ISO 20022 compliant BusinessTransactions and MessageSets. </p><p>The ISO 20022 Repository will contain all ISO 20022 compliant Bu

51608,IS,,ISO 20022-6:2009,Financial services — UNIversal Financial Industry message scheme — Part 6: Message Transport Characteristics,Services financiers — Schéma universel de messages pour l'industrie financière — Partie 6: Caractéristiques du transport de message,2009-09-18,1,['03.060'],ISO/TC 68,9599,,[57341],['en'],13,"<p>ISO 20022-6:2009 specifies the characteristics of the Message Transport System required for an ISO 20022 Business Transaction and Message Definition. Changes to the value of the Message Transport Characteristics can affect the Business Transaction and Message Definition.</p><p>Each Business Transaction in the ISO 20022 Repository is associated with a Message Transport

55010,IS,,ISO 20022-7:2013,Financial services — Universal financial industry message scheme — Part 7: Registration,Services financiers — Schéma universel de messages pour l'industrie financière — Partie 7: Enregistrement,2013-05-07,1,['03.060'],ISO/TC 68/SC 9,9599,,[84859],['en'],5,"<p>ISO 20022-7:2013 specifies the responsibilities of the following bodies, which are involved in the registration and maintenance of the ISO 20022 Repository. </p><ul><li> The Registration Authority (RA) is the operating authority responsible for the registration and maintenance of the ISO 20022 Repository and for providing access to the information described in ISO 20022-1:2013. The RA is assisted by diff

55011,IS,,ISO 20022-8:2013,Financial services — Universal financial industry message scheme — Part 8: ASN.1 generation,Services financiers — Schéma universel de messages pour l'industrie financière — Partie 8: Génération ASN.1,2013-05-07,1,['03.060'],ISO/TC 68/SC 9,9599,,[84860],['en'],25,"<p>ISO 20022-8:2013 describes the transformation rules to generate ASN.1 abstract syntax from an ISO 20022 compliant MessageDefinition. The generated abstract syntax is for the description and validation of Messages.</p><p>The transformation rules are a transformation from Level 3 to Level 4. It is a deterministic transformation, meaning that the resulting ASN.1 is completely predictable for a given Messag

66866,IS,,ISO 20028-1:2017,Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Matériaux polyesters thermoplastiques (TP) pour moulage et extrusion — Partie 1: Système de désignation et base de spécification,2017-03-08,1,['83.080.20'],ISO/TC 61/SC 9,9599,[55479],[76396],"['en','fr']",13,"<p>ISO 20028-1:2017 establishes a system of designation for thermoplastic polyester (TP) material, which can be used as the basis for specifications. It covers polyester homopolymers for moulding and extrusion based on poly(ethylene terephthalate) (PET), poly(butylene terephthalate) (PBT), poly(cyclohexylenedimethylen

6763,IS,,ISO 2003:1975,Raw styrene-butadiene rubber (SBR) — Determination of soap content,Butadiène-styrène (SBR) brut — Dosage des savons,1975-01-01,1,['83.040.10'],ISO/TC 45,9599,,[14662],"['en','fr']",2,

39209,IS,,ISO 20032:2007,Method for evaluation of tensile properties of metallic superplastic materials,Méthode de détermination des caractéristiques de traction des matériaux métalliques superplastiques,2007-02-06,1,['77.040.10'],ISO/TC 164/SC 2,9599,,[62976],"['en','fr']",11,"<p>ISO 20032:2006 specifies a method for evaluating the tensile properties of metallic superplastic materials which exhibit fine-grained superplasticity, without significant work-hardening or dynamic microstructure evolution, by means of a tensile test at constant cross-head velocity, for flat-form test pieces, without an extensometer attached.</p>"

6764,IS,,ISO 2004:1979,"Rubber latex, natural — Centrifuged or creamed, ammonia-preserved types — Specification","Latex de caoutchouc naturel — Types centrifugés ou crémés, à l'ammoniaque — Spécifications",1979-07-01,2,['83.040.10'],ISO/TC 45,9599,,[6765],"['en','fr']",2,

6765,IS,,ISO 2004:1988,"Natural rubber latex concentrate — Centrifuged or creamed, ammonia-preserved types — Specification","Latex concentré de caoutchouc naturel — Types centrifugés ou crémés, préservés à l'ammoniaque — Spécifications",1988-09-22,3,['83.040.10'],ISO/TC 45/SC 3,9599,[6764],[23841],"['en','fr']",2,

23841,IS,,ISO 2004:1997,"Natural rubber latex concentrate — Centrifuged or creamed, ammonia-preserved types — Specification","Latex concentré de caoutchouc naturel — Types centrifugés ou crémés, préservés à l'ammoniaque — Spécifications",1997-10-16,4,['83.040.10'],ISO/TC 45/SC 3,9599,[6765],[46062],"['en','fr']",3,

46062,IS,,ISO 2004:2010,"Natural rubber latex concentrate — Centrifuged or creamed, ammonia-preserved types — Specifications","Latex concentré de caoutchouc naturel — Types centrifugés ou crémés, préservés à l'ammoniaque — Spécifications",2010-08-13,5,['83.040.10'],ISO/TC 45/SC 3,9599,[23841],[70281],"['en','fr']",3,<p>ISO 2004:2010 gives specifications for natural rubber latex concentrate types which are preserved wholly or in part with ammonia and which have been produced by centrifuging or creaming.</p>

70281,IS,,ISO 2004:2017,"Natural rubber latex concentrate — Centrifuged or creamed, ammonia-preserved types — Specifications","Latex concentré de caoutchouc naturel — Types centrifugés ou crémés, préservés à l'ammoniaque — Spécifications",2017-11-22,6,['83.040.10'],ISO/TC 45/SC 3,9599,[46062],[86502],"['en','fr']",3,<p>ISO 2004:2017 gives specifications for natural rubber latex concentrate types which are preserved wholly or in part with ammonia and which have been produced by centrifuging or creaming.</p>

6766,IS,,ISO 2005:1974,Natural rubber latex — Determination of sludge content,Latex de caoutchouc naturel — Détermination de la teneur en sédiment,1974-01-01,1,['83.040.10'],ISO/TC 45,9599,,"[6767,6768]","['en','fr']",2,

6767,IS,,ISO 2005:1985,Natural rubber latex concentrate — Determination of sludge content,Latex concentré de caoutchouc naturel — Détermination de la teneur en sédiment,1985-10-17,2,['83.040.10'],ISO/TC 45/SC 3,9599,[6766],[6768],"['en','fr']",2,

6768,IS,,ISO 2005:1992,"Rubber latex, natural, concentrate — Determination of sludge content",Latex concentré de caoutchouc naturel — Détermination de la teneur en sédiment,1992-06-04,3,['83.040.10'],ISO/TC 45/SC 3,9599,"[6767,6766]",[63554],"['en','fr']",2,<p>The method is not necessarily suitable for latices from natural sources other than Hevea brasiliensis. It is not suitable for compounded latex or vulcanized latex.</p>

42827,IS,Amd,ISO 2005:1992/Amd 1:2006,"Rubber latex, natural, concentrate — Determination of sludge content — Amendment 1: Precision data",Latex concentré de caoutchouc naturel — Détermination de la teneur en sédiment — Amendement 1: Données de fidélité,2006-02-02,3,['83.040.10'],ISO/TC 45/SC 3,9599,,[63554],"['en','fr']",2,

66911,IS,,ISO 20054:2016,Plain bearings — Bearings containing dispersed solid lubricants,Paliers lisses — Paliers contenant des lubrifiants solides dispersés,2016-09-21,1,['21.100.10'],ISO/TC 123/SC 7,9599,,[84437],['en'],11,<p>ISO 20054:2016 specifies a bearing containing dispersed solid lubricants which is used as a solid lubricant bearing.</p>

46007,IS,,ISO 2006-1:2009,"Rubber latex, synthetic — Determination of mechanical stability — Part 1: High-speed method",Latex de caoutchouc synthétique — Détermination de la stabilité mécanique — Partie 1: Méthode à vitesse élevée,2009-08-13,1,['83.040.10'],ISO/TC 45/SC 3,9599,[6770],[80029],"['en','fr']",7,<p>ISO 2006-1:2009 specifies a method for the determination of the high-speed mechanical stability of synthetic rubber latex. The method is not applicable to compounded synthetic rubber latices.</p>

6769,IS,,ISO 2006:1974,Synthetic rubber latex — Determination of high-speed mechanical stability,Latex d'élastomère de synthèse — Détermination de la stabilité mécanique à vitesse élevée,1974-05-01,1,['83.040.10'],ISO/TC 45,9599,,[6770],['en'],2,

6770,IS,,ISO 2006:1985,"Rubber latex, synthetic — Determination of high-speed mechanical stability",Latex de caoutchouc synthétique — Détermination de la stabilité mécanique à vitesse élevée,1985-12-18,2,['83.040.10'],ISO/TC 45/SC 3,9599,[6769],[46007],"['en','fr']",2,<p>Specifies a stirring disk which has a greater diameter than that specified in ISO 35. The test is applicable for two viscosities of latices which are given in detail. The duration of stirring shall be agreed between the interested parties and shall not be longer than 30 min or less than 1 min. In case of a latex which contains ammonia the curation of stirring shall be limited. A formula for the expression of the results is g

6771,IS,,ISO 2007:1981,"Rubber, unvulcanized — Determination of plasticity — Rapid plastimeter method",Caoutchouc non vulcanisé — Détermination de l'indice rapide de plasticité — Méthode au plastomètre,1981-12-01,2,['83.040.10'],ISO/TC 45,9599,,[6772],['en'],2,

6772,IS,,ISO 2007:1991,"Rubber, unvulcanized — Determination of plasticity — Rapid-plastimeter method",Caoutchouc non vulcanisé — Détermination de la plasticité — Méthode au plastomètre rapide,1991-11-07,3,['83.060'],ISO/TC 45/SC 2,9599,[6771],[45386],"['en','fr']",3,"<p>Applicable to determination of the plasticity retention index (PRI) according to ISO 2930. Describes the principle, the apparatus, the test piece, the calibration and test procedure, the expression of results, and the contents of the test report. This third edition cancels and replaces the second edition (1981).</p>"

45386,IS,,ISO 2007:2007,"Rubber, unvulcanized — Determination of plasticity — Rapid-plastimeter method",Caoutchouc non vulcanisé — Détermination de la plasticité — Méthode au plastomètre rapide,2007-06-11,4,['83.060'],ISO/TC 45/SC 2,9599,[6772],[70324],"['en','fr']",3,"<p>ISO 2007:2007 specifies a method for the rapid determination of the plasticity of raw rubber and unvulcanized compounded rubber. It is applicable to the determination of the plasticity retention index (PRI) as specified in ISO 2930, <i>Rubber, raw natural -- Determination of plasticity retention index (PRI)</i>.</p>"

70324,IS,,ISO 2007:2018,"Rubber, unvulcanized — Determination of plasticity — Rapid-plastimeter method",Caoutchouc non vulcanisé — Détermination de la plasticité — Méthode au plastomètre rapide,2018-07-18,5,['83.060'],ISO/TC 45/SC 2,9599,[45386],[88771],['en'],7,<p>This document specifies a method for the rapid determination of the plasticity of raw rubber and unvulcanized compounded rubber. It is applicable to the determination of the plasticity retention index (PRI) as specified in ISO 2930.</p>

66978,IS,,ISO 20078-1:2019,Road vehicles — Extended vehicle (ExVe) web services — Part 1: Content,Véhicule routiers — Web services du véhicule étendu (ExVe) — Partie 1: Contenu,2019-02-25,1,['43.040.15'],ISO/TC 22/SC 31,9599,,[80183],['en'],17,"<p>This document defines the different concepts, entities and roles involved in implementing and delivering ExVe web services. In addition, it also gives an overview of the necessary activities that should be executed by the different roles involved and a logical order for those activities.</p><p>This document defines the concept of identifiers (direct and correlated), different Resource categories (e.g. personal, vehicle related, pseudonymized and an

67578,IS,,ISO 20078-2:2019,Road vehicles — Extended vehicle (ExVe) web services — Part 2: Access,Véhicule routiers — Web services du véhicule étendu (ExVe) — Partie 2: Accès,2019-02-25,1,['43.040.15'],ISO/TC 22/SC 31,9599,,[80184],['en'],20,"<p>This document defines how to access Resources on a Web services interface of an Offering Party using the Hypertext Transfer Protocol Secure (HTTPS). For such an access, the Representational State Transfer (REST) architectural pattern is chosen as a common way to format Resource paths. Some specific extensions to this pattern are defined to allow for asynchronous Resource requests, such as, for example, forcing readouts of data from a connected vehicle

67579,IS,,ISO 20078-3:2019,Road vehicles — Extended vehicle (ExVe) web services — Part 3: Security,Véhicule routiers — Web services du véhicule étendu (ExVe) — Partie 3: Sécurité,2019-04-30,1,['43.040.15'],ISO/TC 22/SC 31,9599,,[80185],['en'],17,"<p>This document defines how to authenticate users and Accessing Parties on a web services interface. It also defines how a Resource Owner can delegate Access to its Resources to an Accessing Party. Within this context, this document also defines the necessary roles and required separation of duties between these in order to fulfil requirements stated on security, data privacy and data protection.</p><p>All conditions and dependencies of the roles a

6773,IS,,ISO 2008:1980,"Rubber latex, styrene-butadiene — Determination of volatile unsaturates",Latex de butadiène-styrène — Dosage des composés non saturés volatils,1980-04-01,2,['83.040.10'],ISO/TC 45,9599,,[6774],"['en','fr']",2,

6775,IS,,ISO 2009:1983,Slotted countersunk flat head screws (common head style) — Product grade A,Vis à métaux à tête fraisée fendue — Grade A,1983-07-01,2,['21.060.10'],ISO/TC 2,9599,,[6776],"['en','fr']",4,

6776,IS,,ISO 2009:1994,Slotted countersunk flat head screws (common head style) — Product grade A,Vis à métaux à tête fraisée fendue — Grade A,1994-04-21,3,['21.060.10'],ISO/TC 2/SC 11,9599,[6775],[57370],"['en','fr']",4,"<p>Specifies the characteristics of slotted countersunk flat head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specifications other than those listed here are required, they should be selected from existing International Standards, e.g. ISO 261, ISO 888, ISO 898-1, ISO 965-2 and ISO 3506.</p>"

6777,IS,,ISO 2010:1983,Slotted raised countersunk head screws (common head style) — Product grade A,Vis à métaux à tête fraisée bombée fendue — Grade A,1983-07-01,2,['21.060.10'],ISO/TC 2,9599,,[6778],"['en','fr']",4,

6778,IS,,ISO 2010:1994,Countersunk slotted raised head screws (common head style) — Product grade A,Vis à métaux à tête fraisée bombée fendue — Grade A,1994-04-21,3,['21.060.10'],ISO/TC 2/SC 11,9599,[6777],[57371],"['en','fr']",4,"<p>Specifies the characteristics of countersunk slotted raised head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specifications other than those listed here are required, they should be selected from existing International Standards, e.g. ISO 261, ISO 888, ISO 898-1, ISO 965-2 and ISO 3506.</p>"

67063,IS,,ISO 20109:2016,Simultaneous interpreting — Equipment — Requirements,Interprétation simultanée — Équipement — Exigences,2016-12-02,1,['91.040.10'],ISO/TC 37/SC 5,9599,,[84056],"['en','fr']",16,"<p>ISO 20109:2016 specifies requirements for equipment used for simultaneous interpreting.</p><p>Accessibility requirements are defined in Annex A.</p><p>Requirements for booths furniture are defined in Annex B.</p><p>Requirements on the system operation are defined in Annex C.</p><p>In conjunction with either ISO 2603 or ISO 4043, ISO 20108 and this document provide the relevant requirements both for the quality and transmission of sound and image provided to interpreters and for the equipme

54552,IS,,ISO 20121:2012,Event sustainability management systems — Requirements with guidance for use,Systèmes de management responsable appliqués à l'activité événementielle — Exigences et recommandations de mise en oeuvre,2012-06-14,1,"['13.020.20','03.100.70']",ISO/TMBG,9599,,[86389],"['ar','en','fr','ru']",42,"<div id='MathJax_Message' style='display: none;'></div><p>ISO 20121:2012 specifies requirements for an event sustainability management system for any type of event or event-related activity, and provides guidance on conforming to those requirements.</p><p>ISO 20121:2012 is applicable to any organization that wishes to:</p><ul><li>establish, implement, maintain and improve an event

35288,IS,,ISO 20126:2005,Dentistry — Manual toothbrushes — General requirements and test methods,Art dentaire — Brosses à dents manuelles — Exigences générales et méthodes d'essai,2005-09-15,1,['97.170'],ISO/TC 106/SC 7,9599,[15961],[55744],"['en','fr']",6,<p>ISO 20126:2005 specifies requirements and test methods for the physical properties of manual toothbrushes in order to promote the safety of these products for their intended use.</p><p>Specifically excluded are manual interdental brushes and powered oral hygiene devices as these instruments are covered by separate International Standards.</p>

55744,IS,,ISO 20126:2012,Dentistry — Manual toothbrushes — General requirements and test methods,Médecine bucco-dentaire — Brosses à dents manuelles — Exigences générales et méthodes d'essai,2012-01-20,2,['97.170'],ISO/TC 106/SC 7,9599,[35288],[74662],"['en','fr']",11,"<p>This International Standard specifies requirements and test methods for the physical properties of manual toothbrushes in order to promote the safety of these products for their intended use.</p><p>This International Standard does not apply to manual interdental brushes and powered oral hygiene devices, as these instruments are covered by separate International Standards.</p>"

65256,IS,Amd,ISO 20126:2012/Amd 1:2018,Dentistry — Manual toothbrushes — General requirements and test methods — Amendment 1,Médecine bucco-dentaire — Brosses à dents manuelles — Exigences générales et méthodes d'essai — Amendement 1,2018-01-31,2,['97.170'],ISO/TC 106/SC 7,9599,,[74662],"['en','fr']",2,

35289,IS,,ISO 20127:2005,Dentistry — Powered toothbrushes — General requirements and test methods,Art dentaire — Brosses à dents électriques — Exigences générales et méthodes d'essai,2005-03-17,1,['97.170'],ISO/TC 106/SC 7,9599,,[72351],"['en','fr']",6,<p>ISO 20127:2005 specifies requirements and test methods for the physical properties of powered toothbrushes in order to promote the safety of these products for their intended use.</p><p>Specifically excluded are other types of powered oral hygiene devices (such as powered interdental brushes) and manual toothbrushes.</p>

72351,IS,,ISO 20127:2020,Dentistry — Physical properties of powered toothbrushes,Médecine bucco-dentaire — Caractéristiques physiques des brosses à dents électriques,2020-08-21,2,['97.170'],ISO/TC 106/SC 7,9599,[35289],[82097],"['en','fr']",17,"<p>This document specifies requirements and test methods for the physical properties of powered toothbrushes in order to promote the safety of these products for their intended use.</p><p>There are different technologies of powered toothbrushes. Common features of those powered toothbrushes to which this document applies are:</p><p>— a battery;</p><p>— a motor;</p><p>— a mechanical or magnetic drive system;</p><p>— a moving brush head

6780,IS,,ISO 2013:1983,Textile machinery and accessories — Beams — Method of measuring variations of form and position,Matériel pour l'industrie textile — Ensouples — Méthode de mesurage des variations de forme et de position,1983-05-01,2,['59.120.20'],ISO/TC 72/SC 3,9599,,[21954],"['en','fr']",3,

67094,IS,,ISO 20136:2017,Leather — Determination of degradability by micro-organisms,Cuir — Détermination de la dégradabilité par les micro-organismes,2017-03-02,1,['59.140.30'],IULTCS,9599,,[75892],"['en','fr']",20,"<p>ISO 20136:2017 specifies a test method to determine the degree and rate of aerobic biodegradation of hides and skins of different animal origin, whether they are tanned or not, through the indirect determination of CO₂ produced by the degradation of collagen.</p><p>The test material is exposed to an inoculum (activated sludge from tannery wastewater) in an aqueous medium.</p><p>The conditions established in this document correspond to optimum laboratory conditions

67095,IS,,ISO 20137:2017,Leather — Chemical tests — Guidelines for testing critical chemicals in leather,Cuir — Essais chimiques — Lignes directrices pour les essais de produits chimiques critiques sur le cuir,2017-03-02,1,['59.140.30'],IULTCS,9599,,[85441],"['en','fr']",11,"<p>ISO 20137:2017 gives guidelines to apply the available chemical test methods for leather. This information can be used by those involved in setting specifications for leather, especially for those parameters relating to restricted chemical substances.</p><p>Lists of restricted chemicals contain many substances that are not relevant to the leather industry. Those chemical substances that are not mentioned in this docum

6781,IS,,ISO 2014:1976,Writing of calendar dates in all-numeric form,Représentation numérique des dates,1976-04-01,1,['01.140.30'],ISO/TC 154,9599,,[15903],"['en','fr']",1,

54809,IS,,ISO 20140-1:2013,Automation systems and integration — Evaluating energy efficiency and other factors of manufacturing systems that influence the environment — Part 1: Overview and general principles,Systèmes d'automatisation et intégration — Évaluation de l'efficacité énergétique et autres facteurs de fabrication des systèmes qui influencent l'environnement — Partie 1: Aperçu et principes généraux,2013-04-17,1,['25.040.01'],ISO/TC 184/SC 5,9599,,[69358],['en'],43,"<p>ISO 20140-1:2013 establishes an overview and general principles of a method for the assessment of environmental influence of manufacturing systems.</p><p>ISO 20140 specifies for the discrete products/parts manufacturin

63171,IS,,ISO 20140-5:2017,Automation systems and integration — Evaluating energy efficiency and other factors of manufacturing systems that influence the environment — Part 5: Environmental performance evaluation data,Systèmes d'automatisation et intégration — Évaluation de l'efficacité énergétique et autres facteurs de fabrication des systèmes qui influencent l'environnement — Partie 5: Données d'évaluation de la performance environnementale,2017-04-19,1,['25.040.01'],ISO/TC 184/SC 5,9599,,[82978],['en'],64,"<p>ISO 20140-5:2017 specifies the types of environmental performance evaluation (EPE) data, including their attributes, which can be used for evaluating the environmental performance o

67149,IS,,ISO 20145:2019,Pneumatic fluid power — Test methods for measuring acoustic emission pressure levels of exhaust silencers,Transmissions pneumatiques — Méthodes d'essai de mesure du niveau de pression d'émission acoustique des silencieux d'échappement,2019-10-21,1,['23.100.99'],ISO/TC 131/SC 5,9599,,"[84961,88080]","['en','fr']",21,"<p>This document specifies two methods of measuring the level of acoustic pressure at the outlet of an exhaust silencer:</p><p>— the first method, called 'steady-state mode', is intended to evaluate the noise level under steady state flow, i.e. constant upstream pressure (steady-state test according to ISO 6358‑1); and</p><p>— the second

6782,IS,,ISO 2015:1976,Numbering of weeks,Numérotage des semaines,1976-06-01,1,['01.140.30'],ISO/TC 154,9599,,[15903],"['en','fr']",2,

6784,IS,,ISO 2017:1982,Vibration and shock — Isolators — Procedure for specifying characteristics,Vibrations et chocs — Isolateurs — Dispositions pour la spécification des caractéristiques,1982-11-01,2,['17.160'],ISO/TC 108,9599,,"[28919,36647]","['en','fr']",4,"<p>Specifies the subject matter and format for describing resilient mounts, the equipment to be isolated, supporting structure and environment. Is intended to serve as guide for the exchange of technical information between the user and supplier of resilient devices, as required for their proper application.</p>"

39264,IS,,ISO 20176:2006,Road vehicles — H-point machine (HPM II) — Specifications and procedure for H-point determination,Véhicules routiers — Machine point H (HPM II) — Spécifications et procédures pour la détermination du point H,2006-03-29,1,['43.020'],ISO/TC 22,9599,,[55291],"['en','fr']",44,"<p>ISO 20176:2006 provides the specifications and procedures for using the H-point machine (HPM) to audit vehicle seating positions. The HPM is a physical tool used to establish key reference points and measurements in a vehicle. The H-point design tool (HPD) is a simplified CAD version of the HPM, which can be used in conjunction with the HPM to take the optional measurements specified in this doc

55291,IS,,ISO 20176:2011,Road vehicles — H-point machine (HPM-II) — Specifications and procedure for H-point determination,Véhicules routiers — Machine point H (HPM-II) — Spécifications et procédure pour la détermination du point H,2011-03-10,2,['43.020'],ISO/TC 22/SC 39,9599,[39264],[75286],['en'],63,"<p>ISO 20176:2011 provides the specifications and procedures for using the H-point machine (HPM) to audit vehicle seating positions. The HPM is a physical tool used to establish key reference points and measurements in a vehicle. The H-point design tool (HPD) is a simplified computer-aided design (CAD) version of the HPM, which can be used in conjunction with the HPM to take the optional measu

35313,IS,,ISO 20182:2005,Refractory test piece preparation — Gunning refractory panels by the pneumatic-nozzle mixing type guns,Préparation d'éprouvettes réfractaires — Panneaux réfractaires pour gunitage au pistolet mélangeur pneumatique,2005-11-23,1,['81.080'],ISO/TC 33,9599,,[44232],"['en','fr']",5,"<p>ISO 20182:2005 describes the procedure for the preparation of test panels from refractory materials by gunning through pneumatic-nozzle mixing type guns at ambient temperatures.</p><p>It does not apply to plastic gunning mixes, and may not apply to those mixes that contain aggregates that are susceptible to hydration.</p><p>It also does not apply to shotcrete type mixes.</p>"

44232,IS,,ISO 20182:2008,Refractory test-piece preparation — Gunning refractory panels by the pneumatic-nozzle mixing type guns,Préparation d'éprouvettes réfractaires — Panneaux réfractaires pour gunitage au pistolet mélangeur pneumatique,2008-01-07,2,['81.080'],ISO/TC 33,9599,[35313],[82319],"['en','fr','ru']",6,"<p>ISO 20182:2008 describes the procedure for the preparation of test panels from refractory materials by gunning through pneumatic-nozzle mixing type guns at ambient temperatures.</p><p>ISO 20182:2008 does not apply to plastic gunning mixes, and might not apply to those mixes that contain aggregates that are susceptible to hydration.</p><p>It also does not apply to shotcrete type