Withdrawn and superseded ISO standards — page 75 of 246

53571,IS,Cor,ISO 20795-1:2008/Cor 1:2009,Dentistry — Base polymers — Part 1: Denture base polymers — Technical Corrigendum 1,Art dentaire — Polymères de base — Partie 1: Polymères pour base de prothèses dentaires — Rectificatif technique 1,2009-02-10,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[62277],"['en','fr']",1,

46131,IS,,ISO 20795-2:2010,Dentistry — Base polymers — Part 2: Orthodontic base polymers,Art dentaire — Polymères de base — Partie 2: Polymères pour base orthodontique,2010-03-02,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[62279],"['en','fr']",31,<p>ISO 20795-2:2010 is applicable to orthodontic base polymers and copolymers used in the construction of both active and passive orthodontic appliances and specifies their requirements. It also specifies test methods to be used in determining compliance with these requirements. ISO 20795-2:2010 further specifies requirements with respect to packaging and marking the products and to the instructions to be supplied for use of these materials.</p>

6867,IS,,ISO 2080:1981,Electroplating and related processes — Vocabulary,Dépôts électrolytiques et opérations s'y rattachant — Vocabulaire,1981-11-01,2,"['25.220.40','01.040.25']",ISO/TC 107,9599,,"[30265,45351,21271]","['en','fr','ru']",56,"<p>This second edition cancels and replaces the first edition (i. e. ISO 2080:1973). Includes terms widely used in the science and industry of elektrodeposition and metal- finishing. In addition to terms used in the three official ISO languages (English, French and Russian), this International Standard includes the equivalent terms in the German language.Elektrolytisches Herstellen von Metallüberzügen und verwandte Verfahren; Begriffe</p>"

45351,IS,,ISO 2080:2008,"Metallic and other inorganic coatings — Surface treatment, metallic and other inorganic coatings — Vocabulary","Revêtements métalliques et autres revêtements inorganiques — Traitement de surface, revêtements métalliques et autres revêtements inorganiques — Vocabulaire",2008-07-07,3,"['25.220.40','01.040.25']",ISO/TC 107,9599,"[6866,6867]",[76077],"['en','fr']",47,"<p>ISO 2080:2008 describes general types of surface-finishing processes and provides a vocabulary that defines terms related to these processes. Emphasis is placed on practical usage in surface-finishing technology in the metal-finishing field. The vocabulary does not include definitions and terms for porce

35548,IS,,ISO 20805:2005,Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming,"Tôles fortes en acier laminées à chaud à limite d'élasticité et aptitude au formage accues, en bobines, pour formage à froid",2005-02-02,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[53486],['en'],9,"<p> ISO 20805:2005 applies to continuous hot-rolled steel sheet of higher yield strength with improved formability. The steel is killed, made according to a fine-grain practice and has a suitable chemical composition, which shall include microalloying elements, to provide improved formability. The steel may be treated to achieve inclusion control. The product

53486,IS,,ISO 20805:2011,Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming,"Tôles fortes en acier laminées à chaud à limite d'élasticité et aptitude au formage accrues, en bobines, pour formage à froid",2011-04-28,2,['77.140.50'],ISO/TC 17/SC 12,9599,[35548],[70240],"['en','ru']",9,"<p>ISO 20805:2011 applies to continuous hot-rolled steel sheet of higher yield strength with improved formability. The steel is killed, made according to a fine-grain practice and has a suitable chemical composition, which includes microalloying elements, to provide improved formability. The steel can be treated to achieve inclusion control. Th

34271,IS,,ISO 20806:2004,Mechanical vibration — Criteria and safeguards for the in-situ balancing of medium and large rotors,Vibrations mécaniques — Critères et sauvegardes relatifs à l'équilibrage in situ des rotors moyens et grands,2004-10-07,1,['21.120.40'],ISO/TC 108,9599,,[54076],['en'],23,"<p>ISO 20806:2004 specifies procedures to be adopted when balancing medium and large rotors installed in their own bearings on site. It addresses the conditions under which it is appropriate to undertake <i>in-situ</i> balancing, the instrumentation required, the safety implications and the requirements for reporting and maintaining records.</p><p>ISO 20806:2004 can be used as a basis for a contract

54076,IS,,ISO 20806:2009,Mechanical vibration — Criteria and safeguards for the in-situ balancing of medium and large rotors,Vibrations mécaniques — Critères et sauvegardes relatifs à l'équilibrage in situ des rotors moyens et grands,2009-09-03,2,['21.120.40'],ISO/TC 108/SC 2,9599,[34271],[56561],['en'],23,"<p>ISO 20806:2009 specifies procedures to be adopted when balancing medium and large rotors installed in their own bearings on site. It addresses the conditions under which it is appropriate to undertake <i>in-situ</i> balancing, the instrumentation required, the safety implications and the requirements for reporting and maintaining records.</p><p>ISO 20806:2009 can be used as a basis for

35549,IS,,ISO 20808:2004,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method",Céramiques techniques — Détermination des caractéristiques de frottement et d'usure des céramiques monolithiques par la méthode 'bille sur disque',2004-01-26,1,['81.060.30'],ISO/TC 206,9599,,[65415],['en'],9,"<p>ISO 20808:2004 specifies a procedure for and provides guidance on the determination of the coefficient of friction and the specific wear rate for monolithic ceramics. In this method, the materials are tested in pairs, in a ball-on-disc configuration, under dry, non-abrasive conditions.</p>"

6868,IS,,ISO 2081:1973,Metallic coatings — Electroplated coatings of zinc on iron or steel,Revêtements métalliques — Dépôts électrolytiques de zinc sur fer ou acier,1973-07-01,1,['25.220.40'],ISO/TC 107/SC 3,9599,,[6869],"['en','fr']",6,

6869,IS,,ISO 2081:1986,Metallic coatings — Electroplated coatings of zinc on iron or steel,Revêtements métalliques — Dépôts électrolytiques de zinc sur fer ou acier,1986-09-04,2,['25.220.40'],ISO/TC 107/SC 3,9599,[6868],"[33855,44331,20042]","['en','fr']",5,"<p>This second edition cancels and replaces the first edition (i. e. ISO 2081:1973). Is not applicable to coatings applied to sheet, strip or wire in the unfabricated form, to close-coiled springs, for other than protective or decorative purposes. Includes information to be supplied by the purchaser to the electroplater and requirements for heat treatment. Coating thickness of threaded components: see ISO 4042.</p>"

44331,IS,,ISO 2081:2008,Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary treatments on iron or steel,Revêtements métalliques et autres revêtements inorganiques — Dépôts électrolytiques de zinc avec traitements supplémentaires sur fer ou acier,2008-12-10,3,['25.220.40'],ISO/TC 107/SC 3,9599,[6869],[66374],"['en','fr']",15,"<p>ISO 2081:2008 specifies requirements for electroplated coatings of zinc with supplementary treatments on iron or steel. It includes information to be supplied by the purchaser to the electroplater, and the requirements for heat treatment before and after electroplating.</p><p>It is not applicable to zinc coatings applied</p><ul><l

66374,IS,,ISO 2081:2018,Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary treatments on iron or steel,Revêtements métalliques et autres revêtements inorganiques — Dépôts électrolytiques de zinc avec traitements supplémentaires sur fer ou acier,2018-02-15,4,['25.220.40'],ISO/TC 107/SC 3,9599,[44331],[88302],"['en','fr']",11,"<p>ISO 2081:2018 specifies requirements for electroplated coatings of zinc with supplementary treatments on iron or steel. It includes information to be supplied by the purchaser to the electroplater, and the requirements for heat treatment before and after electroplating.</p><p>ISO 2081:2018 is not applicable to zinc coatings appli

39744,IS,,ISO 20815:2008,"Petroleum, petrochemical and natural gas industries — Production assurance and reliability management","Industries du pétrole, de la pétrochimie et du gaz naturel — Assurance de la production et management de la fiabilité",2008-05-14,1,"['75.200','75.180.01']",ISO/TC 67,9599,,[69983],"['en','fr']",65,"<p>ISO 20815:2008 introduces the concept of production assurance within the systems and operations associated with exploration drilling, exploitation, processing and transport of petroleum, petrochemical and natural gas resources. ISO 20815:2008 covers upstream (including subsea), midstream and downstream facilities and activities. It focuses on production assurance of

69983,IS,,ISO 20815:2018,"Petroleum, petrochemical and natural gas industries — Production assurance and reliability management","Industries du pétrole, de la pétrochimie et du gaz naturel — Assurance production et gestion de la fiabilité",2018-10-18,2,"['75.200','75.180.01']",ISO/TC 67,9599,[39744],[89174],"['en','fr']",99,"<p>This document describes the concept of production assurance within the systems and operations associated with exploration drilling, exploitation, processing and transport of petroleum, petrochemical and natural gas resources. This document covers upstream (including subsea), midstream and downstream facilities, petrochemical and associated activities. It focuses on pr

69312,IS,,ISO 20819:2018,Plastics — Wood-plastic recycled composites (WPRC) — Specification,Plastiques — Composites recyclés bois-plastique (WPRC) — Spécifications,2018-03-19,1,['83.140.99'],ISO/TC 61/SC 11,9599,,[77445],['en'],11,<p>ISO 20819:2018 specifies the types and proportions of raw materials to be used for wood-plastic recycled composites (hereafter referred to as WPRC). It also specifies the health and safety requirements for WPRC and the methods to test these properties.</p><p>ISO 20819:2018 is applicable to WPRC which are primarily used as building materials.</p>

6870,IS,,ISO 2082:1973,Metallic coatings — Electroplated coatings of cadmium on iron or steel,Revêtements métalliques — Dépôts électrolytiques de cadmium sur fer ou acier,1973-09-01,1,['25.220.40'],ISO/TC 107/SC 3,9599,,[6871],"['en','fr']",6,

6871,IS,,ISO 2082:1986,Metallic coatings — Electroplated coatings of cadmium on iron or steel,Revêtements métalliques — Dépôts électrolytiques de cadmium sur fer ou acier,1986-09-04,2,['25.220.40'],ISO/TC 107/SC 3,9599,[6870],"[44330,20041,33856]","['en','fr']",5,"<p>This second edition cancels and replaces the first edition (i. e. ISO 2081:1973). Contains a caution because cadmium is toxic! ISO 2082 is not applicable to coatings applied to sheet, strip or wire in the unfabricated form, to close-coiled springs, for other than protective or decorative purposes. Includes information to be supplied by the purchaser to the electroplater and requirements for heat treatment. Coating thickness of t

44330,IS,,ISO 2082:2008,Metallic and other inorganic coatings — Electroplated coatings of cadmium with supplementary treatments on iron or steel,Revêtements métalliques et autres revêtements inorganiques — Dépôts électrolytiques de cadmium avec traitements supplémentaires sur fer ou acier,2008-12-10,3,['25.220.40'],ISO/TC 107/SC 3,9599,[6871],[66503],"['en','fr']",15,"<p>ISO 2082:2008 specifies the requirements of electroplated coatings of cadmium with supplementary treatments on iron and steel. It includes information that is to be supplied by the purchaser to the electroplater, and describes coating requirements, including those for heat treatment before and after electroplating.</p><p>It

39760,IS,,ISO 20837:2006,Microbiology of food and animal feeding stuffs — Polymerase chain reaction (PCR) for the detection of food-borne pathogens — Requirements for sample preparation for qualitative detection,Microbiologie des aliments — Réaction de polymérisation en chaîne (PCR) pour la détection des micro-organismes pathogènes dans les aliments — Exigences relatives à la préparation des échantillons pour la détection qualitative,2006-04-06,1,['07.100.30'],ISO/TC 34/SC 9,9599,,[81777],"['en','fr','ru']",7,"<p>ISO 20837:2006 provides criteria and examples for sample preparation in order to obtain PCR-compatible samples or nucleic acids of suitable quality and quantity for PCR.</p><p>It pr

39761,IS,,ISO 20838:2006,Microbiology of food and animal feeding stuffs — Polymerase chain reaction (PCR) for the detection of food-borne pathogens — Requirements for amplification and detection for qualitative methods,Microbiologie des aliments — Réaction de polymérisation en chaîne (PCR) pour la détection des micro-organismes pathogènes dans les aliments — Exigences relatives à l'amplification et à la détection pour les méthodes qualitatives,2006-04-06,1,['07.100.30'],ISO/TC 34/SC 9,9599,,[81777],"['en','fr','ru']",7,"<p>ISO 20838:2006 provides the overall framework for qualitative methods for the detection of food-borne pathogens using the polymerase chain reaction (PCR). </p><p>It covers

6873,IS,,ISO 2084:1974,Pipeline flanges for general use — Metric series — Mating dimensions,Brides de tuyauteries à usage général — Série métrique — Dimensions de raccordement,1974-06-01,1,['23.040.60'],ISO/TC 5,9599,,"[13573,13574,13575]","['en','fr']",5,

34280,IS,,ISO 20843:2003,"Petroleum and related products — Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC","Pétrole et produits connexes — Détermination du pH des fluides difficilement inflammables de catégories HFAE, HFAS ou HFC",2003-08-22,1,['75.120'],ISO/TC 28,9599,,[56539],"['en','fr']",3,"<p>ISO 20843:2003 specifies a test method to determine the pH value of non-flammable fluids within categories HFAE, HFAS and HFC, as classified in ISO 6743-4:1999.</p>"

34281,IS,,ISO 20844:2004,Petroleum and related products — Determination of the shear stability of polymer-containing oils using a diesel injector nozzle,Pétrole et produits connexes — Détermination de la stabilité au cisaillement de fluides contenant des polymères au moyen d'un injecteur pour moteur diesel,2004-03-08,1,['75.080'],ISO/TC 28,9599,,[63726],"['en','fr','ru']",9,"<p>ISO 20844:2004 specifies a method to assess the resistance to shear stresses applied to mineral oils, synthetic oils and other fluids containing polymers, when passed through a specified diesel injector nozzle. The shear stability is measured by the change in viscosity of the fluid under test, brought about by the pol

34284,IS,,ISO 20846:2004,Petroleum products — Determination of sulfur content of automotive fuels — Ultraviolet fluorescence method,Produits pétroliers — Détermination de la teneur en soufre des carburants pour automobiles — Méthode par fluorescence ultraviolette,2004-03-09,1,"['75.080','75.160.30']",ISO/TC 28,9599,,[51774],"['en','fr']",12,"<p>ISO 20846:2004 specifies an ultraviolet fluorescence test method for the determination of the sulfur content of motor gasolines, including those containing up to 2,7 %(<i>m/m</i>) oxygen, and of diesel fuels, including those containing up to 5 % (<i>V</i>/<i>V</i>) fatty acid methylester (FAME), having sulfur contents in the range 3 mg/kg to 500 mg/kg

51774,IS,,ISO 20846:2011,Petroleum products — Determination of sulfur content of automotive fuels — Ultraviolet fluorescence method,Produits pétroliers — Détermination de la teneur en soufre des carburants pour automobiles — Méthode par fluorescence ultraviolette,2011-09-22,2,"['75.160.20','75.160.30']",ISO/TC 28,9599,[34284],[74313],"['en','fr']",12,"<p>ISO 20846:2011 specifies an ultraviolet (UV) fluorescence test method for the determination of the sulfur content of motor gasolines containing up to 3,7 % (<i>m/m</i>) oxygen [including those blended with ethanol up to about 10 % (<i>V/V</i>)], and of diesel fuels, including those containing up to about 10 % (<i>V/V</i>) fatty acid methyles

74313,IS,,ISO 20846:2019,Petroleum products — Determination of sulfur content of automotive fuels — Ultraviolet fluorescence method,Produits pétroliers — Détermination de la teneur en soufre des carburants pour automobiles — Méthode par fluorescence ultraviolette,2019-08-08,3,"['75.160.20','75.160.30']",ISO/TC 28,9599,[51774],[87513],"['en','fr']",13,"<p>This document specifies an ultraviolet (UV) fluorescence test method for the determination of the sulfur content of the following products:</p><p>— having sulfur contents in the range 3 mg/kg to 500 mg/kg,</p><ul><li>— motor gasolines containing up to 3,7 % (<i>m</i>/<i>m</i>) oxygen [including those blended with ethanol up to about

43936,IS,,ISO 20848-3:2006,"Packaging — Plastics drums — Part 3: Plug/bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l","Emballages — Fûts en matière plastique — Partie 3: Systèmes de fermeture à bondes pour fûts en matière plastique d'une capacité nominale de 113,6 l à 220 l",2006-09-18,1,['55.140'],ISO/TC 122,9599,,[70252],"['en','fr','ru']",23,"<p>ISO 20848-3:2006 specifies the characteristics and dimensions of plug/bung closure systems for internally threaded openings in plastics drums of nominal capacity 113,6 l to 220 l.</p>"

6874,IS,,ISO 2085:1976,Anodizing of aluminium and its alloys — Check of continuity of thin anodic oxide coatings — Copper sulphate test,Anodisation de l'aluminium et de ses alliages — Contrôle de la continuité des couches anodiques minces — Essai au sulfate de cuivre,1976-11-01,1,['25.220.20'],ISO/TC 79/SC 2,9599,,[51481],"['en','fr']",1,<p>The use of the copper sulphate test is limited to oxide coatings having a thickness less than 5 m. This test enables a rapid check. It makes it possible to verify whether a fault on the surface of the coating corresponds to a local gap in the coating (i.e. revealing bare metal).</p>

51481,IS,,ISO 2085:2010,Anodizing of aluminium and its alloys — Check for continuity of thin anodic oxidation coatings — Copper sulfate test,Anodisation de l'aluminium et de ses alliages — Contrôle de la continuité des couches anodiques minces — Essai au sulfate de cuivre,2010-08-10,2,['25.220.20'],ISO/TC 79/SC 2,9599,[6874],[72171],"['en','fr']",2,"<p>ISO 2085:2010 specifies a method for checking the continuity of thin anodic oxidation coatings on aluminium and its alloys by a copper sulfate contact test.</p><p>The use of this method is limited to anodic oxidation coatings of thickness less than 5 μm, or coatings that have been deformed.</p>"

34287,IS,,ISO 20863:2004,Footwear — Test methods for stiffeners and toepuffs — Bondability,Chaussures — Méthodes d'essai pour contreforts et renforts — Aptitude au collage,2004-12-06,1,['61.060'],ISO/TC 216,9599,,[68282],"['en','fr']",5,<p>ISO 20863:2004 specifies a method for the determination of the bondability of heat activated and solvent activated stiffeners and toepuffs to upper and lining materials.</p>

34290,IS,,ISO 20866:2001,Footwear — Test methods for insoles — Delamination resistance,Chaussures — Méthodes d'essai applicables aux premières de montage — Résistance au délaminage,2001-12-20,1,['61.060'],ISO/TC 216,9599,,[63243],"['en','fr']",6,"<p>ISO 20866 specifies a test method for the determination of the delamination resistance of insoles, irrespective of the material.</p>"

34291,IS,,ISO 20867:2001,Footwear — Test methods for insoles — Heel pin holding strength,Chaussures — Méthodes d'essai applicables aux premières de montage — Tenue des clous pour talon,2001-12-20,1,['61.060'],ISO/TC 216,9599,,[63244],"['en','fr']",6,"<p>ISO 20867 specifies a method of determining the ability of an insole component to hold a heel pin and to prevent its head from being pulled through the insole component.</p><p>The method is applicable to insoles used in the seat of footwear with inside attached heels, and also to seat components where outside heel attachments are used and the heel pin is clenched.</p>"

34293,IS,,ISO 20869:2001,"Footwear — Test methods for outsoles, insoles, lining and insocks — Water soluble content","Chaussures — Méthodes d'essai applicables aux premières de montage, aux doublures, aux premières de propreté et aux semelles d'usure — Détermination des substances solubles dans l'eau",2001-12-20,1,['61.060'],ISO/TC 216,9599,,[51175],"['en','fr']",5,"<p>ISO 20869 specifies a method for the determination of the water soluble contents for outsoles, insoles, lining and insocks.</p>"

34294,IS,,ISO 20870:2001,Footwear — Ageing conditioning,Chaussures — Conditionnement en vue du vieillissement,2001-12-20,1,['61.060'],ISO/TC 216,9599,,[63246],"['en','fr']",4,<p>ISO 20870 specifies laboratory procedures which are intended to imitate the effects of naturally-occurring reactions. The physical properties of interest are measured before and after the application of the specified treatments. </p>

34295,IS,,ISO 20871:2001,Footwear — Test methods for outsoles — Abrasion resistance,Chaussures — Méthodes d'essai applicables aux semelles d'usure — Résistance à l'abrasion,2001-12-20,1,['61.060'],ISO/TC 216,9599,,[63230],"['en','fr']",9,"<p>ISO 20871 specifies a method for the determination of the abrasion resistance for outsoles, irrespective of the material.</p>"

34296,IS,,ISO 20872:2001,Footwear — Test methods for outsoles — Tear strength,Chaussures — Méthodes d'essai applicables aux semelles d'usure - Résistance au déchirement,2001-12-20,1,['61.060'],ISO/TC 216,9599,,[63239],"['en','fr']",7,"<p>ISO 20872 specifies a method for the determination of the tear strength of outsoles, irrespective of the material, using trouser test pieces.</p>"

34297,IS,,ISO 20873:2001,Footwear — Test methods for outsoles — Dimensional stability,Chaussures — Méthodes d'essai applicables aux semelles d'usure — Stabilité dimensionnelle,2001-12-20,1,['61.060'],ISO/TC 216,9599,,[63240],"['en','fr']",6,<p>ISO 20873 specifies a method for the determination of the linear shrinkage after heating of test specimens prepared from outsoles.</p>

34298,IS,,ISO 20874:2001,Footwear — Test methods for outsoles — Needle tear strength,Chaussures — Méthodes d'essai applicables aux semelles d'usure — Résistance du point de couture,2001-12-20,1,['61.060'],ISO/TC 216,9599,,[63241],"['en','fr']",5,"<p>ISO 20874 specifies a method for the determination of the needle tear strength for outsoles, irrespective of the material.</p>"

34299,IS,,ISO 20875:2001,Footwear — Test methods for outsoles — Determination of split tear strength and delamination resistance,Chaussures — Méthodes d'essai applicables aux semelles d'usure — Détermination de la force de déchirure sur refente et résistance au délaminage,2001-12-20,1,['61.060'],ISO/TC 216,9599,,[63242],"['en','fr']",6,<p>ISO 20875 specifies a method for the determination of the split tear strength and delamination resistance for outsoles.</p>

34300,IS,,ISO 20876:2001,Footwear — Test methods for insoles — Resistance to stitch tear,Chaussures — Méthodes d'essai applicables aux premières de montage — Résistance au déchirement des points de couture,2001-12-20,1,['61.060'],ISO/TC 216,9599,,[63245],"['en','fr']",4,"<p>ISO 20876 describes a method of evaluating the ability of an insole, irrespective of the material, to hold stitches or to take clenched metal fastenings. The method has become accepted as a general quality criterion for insole materials even where attachment is by means of adhesives.</p>"

34301,IS,,ISO 20877:2001,Footwear — Test methods for whole shoe — Thermal insulation,Chaussures — Méthodes d'essai applicables à la chaussure entière — Isolation thermique,2001-12-20,1,['61.060'],ISO/TC 216,9599,,[51174],"['en','fr']",5,<p>ISO 20877 describes a method of measuring footwear insulation against cold.</p><p>It applies to all types of closed footwear.</p>

35558,IS,,ISO 20884:2004,Petroleum products — Determination of sulfur content of automotive fuels — Wavelength-dispersive X-ray fluorescence spectrometry,Produits pétroliers — Détermination de la teneur en soufre des carburants pour automobiles — Spectrométrie de fluorescence de rayons X dispersive en longueur d'onde,2004-03-08,1,"['75.080','75.160.30']",ISO/TC 28,9599,,[51814],"['en','fr']",8,"<p>ISO 20884:2004 specifies a wavelength-dispersive X-ray fluorescence (WDXRF) test method for the determination of the sulfur content of liquid, homogeneous automotive fuels from 5 mg/kg to 500 mg/kg, which have a maximum oxygen content of 2,7 % (<i>m</i>/<i>m</i>). This product range covers diesel f

51814,IS,,ISO 20884:2011,Petroleum products — Determination of sulfur content of automotive fuels — Wavelength-dispersive X-ray fluorescence spectrometry,Produits pétroliers — Détermination de la teneur en soufre des carburants pour automobiles — Spectrométrie de fluorescence de rayons X dispersive en longueur d'onde,2011-04-07,2,"['75.080','75.160.30']",ISO/TC 28,9599,[35558],[74314],"['en','fr','ru']",9,"<p>ISO 20884:2011 specifies a wavelength-dispersive X-ray fluorescence (WDXRF) test method for the determination of the sulfur content of liquid, homogeneous automotive fuels from 5 mg/kg to 500 mg/kg, which have a maximum oxygen content of 3,7 % (<i>m/m</i>). This product range covers die

69376,IS,,ISO 20892:2018,Space systems — Launch complexes modernization process — General requirements,Systèmes spatiaux — Processus de modernisation des complexes de lancement spatial — Exigences générales,2018-02-01,1,['49.140'],ISO/TC 20/SC 14,9599,,[88934],['en'],7,"<p>ISO 20892:2017 specifies procedures in the preparation and carrying out of the modernization process of launch complexes and their components. These procedures are devised in case there is a need to make changes in existing configuration of launch complexes.</p><p>ISO 20892:2017 establishes the following:</p><p>a) modernization stages;</p><p>b) modernization performance requirements;</p><p>c) functions of the main

4076,IS,,ISO 209-1:1989,Wrought aluminium and aluminium alloys — Chemical composition and forms of products — Part 1: Chemical composition,Aluminium et alliages d'aluminium corroyés — Composition chimique et formes des produits — Partie 1: Composition chimique,1989-08-24,1,['77.150.10'],ISO/TC 79/SC 6,9599,"[7761,4075,8601]","[35310,22881]","['en','fr']",6,<p>Specifies definitions and chemical composition. Gives rules for rounding for determination of compliance (annex A) and guide for ISO designations (annex B).</p>

4077,IS,,ISO 209-2:1989,Wrought aluminium and aluminium alloys — Chemical composition and forms of products — Part 2: Forms of products,Aluminium et alliages d'aluminium corroyés — Composition chimique et formes des produits — Partie 2: Formes des produits,1989-08-24,1,['77.150.10'],ISO/TC 79/SC 6,9599,,"[35310,22882]","['en','fr']",2,"<p>Aluminium and aluminium alloys are allocated in families according to the form of products: rolled products, extruded products, drawn products and wires. The mechanical properties and/or dimensional and form tolerances are specified in other International Standards.</p>"

35310,IS,,ISO 209:2007,Aluminium and aluminium alloys — Chemical composition,Aluminium et alliages d'aluminium — Composition chimique,2007-06-20,1,['77.150.10'],ISO/TC 79/SC 6,9599,"[4077,4076]","[76704,86374]","['en','fr']",3,<p>ISO 209:2007 specifies the designations indicating the chemical composition of aluminium and aluminium alloys.</p>

69405,IS,,ISO 20900:2019,Intelligent transport systems — Partially automated parking systems (PAPS) — Performance requirements and test procedures,Systèmes intelligents de transport — Systèmes de stationnement partiellement automatisés — Exigences de performance et modes opératoires d'essai,2019-05-13,1,['35.240.60'],ISO/TC 204,9599,,[82953],['en'],26,"<p>This document addresses light vehicles^[¹^], e.g. passenger cars, pick-up trucks, light vans and sport utility vehicles (motorcycles excluded), equipped with partially automated parking systems (PAPS).</p><p>This document establishes minimum functionality requirements that the driver can expect and the manufac

41181,IS,,ISO 20903:2006,Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Methods used to determine peak intensities and information required when reporting results,Analyse chimique des surfaces — Spectroscopie des électrons Auger et spectroscopie de photoélectrons par rayons X — Méthodes utilisées pour la détermination de l'intensité des pics et informations requises pour l'expression des résultats,2006-07-04,1,['71.040.40'],ISO/TC 201/SC 7,9599,,[59163],"['en','fr']",13,<p>ISO 20903:2006 specifies the necessary information required in a report of analytical results based on measurements of the intensities of peaks in Auger electron and X-ray p

59163,IS,,ISO 20903:2011,Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Methods used to determine peak intensities and information required when reporting results,Analyse chimique des surfaces — Spectroscopie des électrons Auger et spectroscopie de photoélectrons par rayons X — Méthodes utilisées pour la détermination de l'intensité des pics et informations requises pour l'expression des résultats,2011-10-26,2,['71.040.40'],ISO/TC 201/SC 7,9599,[41181],[74817],['en'],15,

39992,IS,,ISO 20904:2006,Hard coal — Sampling of slurries,Houille — Échantillonnage des schlamms,2006-10-12,1,['73.040'],ISO/TC 27/SC 4,9599,,[75343],['en'],35,"<p>ISO 20904:2006 sets out the basic methods for sampling fine coal, coal rejects or tailings of nominal top size &lt; 4 mm that is mixed with water to form a slurry. At very high ratios of fine solids to water when the material assumes a soft plastic form, the mixture is correctly termed a paste. Sampling of pastes is not covered in ISO 20904:2006.</p><p>The procedures described in ISO 20904:2006 primarily apply to sampling of coal that is transported in moving streams as a slurry. These streams can fall freely or be confined in pi

34313,IS,,ISO 20905:2004,Coal preparation — Determination of dust/moisture relationship for coal,Préparation du charbon — Détermination de la relation particules/humidité du charbon,2004-07-08,1,['73.040'],ISO/TC 27/SC 1,9599,,[87994],['en'],12,<p>ISO 20905:2004 sets out a laboratory procedure for the dust testing of higher rank coals. The procedure defines a means of evaluating the dust/moisture relationship characteristic of a coal and a dust extinction moisture (DEM).</p>

69485,IS,,ISO 20929:2018,Tools for pressing — Heel guidings in large stamping and forming dies,Outillage de presse — Plaques de frottement latérales pour grands outils d'emboutissage et de formage,2018-10-23,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[89391],"['en','fr']",5,<p>This document specifies dimensions for heel guidings in large stamping and forming dies. It also gives example applications and an example for ordering.</p>

6879,IS,,ISO 2093:1973,Metallic coatings — Electroplated coatings of tin,Revêtements métalliques — Dépôts électrolytiques d'étain,1973-07-01,1,['25.220.40'],ISO/TC 107/SC 3,9599,,[6880],"['en','fr']",8,

6881,IS,,ISO 2094:1973,Textile floor coverings — Determination of thickness loss under dynamic loading,Revêtements de sol textiles — Détermination de la perte d'épaisseur sous charge dynamique,1973-12-01,1,['97.150'],ISO/TC 38,9599,,[6882],"['en','fr']",3,

6882,IS,,ISO 2094:1986,Textile floor coverings — Determination of thickness loss under dynamic loading,Revêtements de sol textiles — Détermination de la perte d'épaisseur sous charge dynamique,1986-11-13,2,['97.150'],ISO/TC 219,9599,[6881],[30505],"['en','fr']",3,

6883,IS,,ISO 2095:1977,Textile floor coverings — Determination of mass of effective pile per unit area that can be shorn away from the substrate,Revêtements de sol textiles — Détermination de la masse du velours utile par unité de surface pouvant être séparé du soubassement par tondage,1977-03-01,1,['97.150'],ISO/TC 219,9599,,[15793],"['en','fr']",2,

69534,IS,,ISO 20951:2019,"Soil Quality — Guidance on methods for measuring greenhouse gases (CO2, N2O, CH4) and ammonia (NH3) fluxes between soils and the atmosphere","Qualité du sol — Recommandations sur les méthodes de mesure des gaz à effet de serre (CO2, N2O, CH4) et des flux d'ammoniac (NH3) entre les sols et l'atmosphère",2019-06-17,1,"['13.020.40','13.080.01']",ISO/TC 190,9599,,[93017],"['en','fr']",37,"<p>This document gives an overview and provides guidance on the main methods available to quantify the exchanges of greenhouse gases (CO₂, N₂O, CH₄) and ammonia (NH₃) between soils and the atmosphere.</p><p>It is intended to help users to sel

39903,IS,,ISO 20957-1:2005,Stationary training equipment — Part 1: General safety requirements and test methods,Équipement d'entraînement fixe — Partie 1: Exigences générales de sécurité et méthodes d'essai,2005-12-09,1,['97.220.30'],ISO/TC 83,9599,,[56102],['en'],12,"<p>ISO 20957-1:2005 specifies general safety requirements for stationary training equipment during its use, unless modified in other parts of ISO 20957. It also specifies a classification system.</p><p>ISO 20957-1:2005 is applicable to stationary training equipment including equipment for use in training areas of organizations such as sport associations, educational establishments, hotels, sport halls, clubs, rehabilitation cen

56102,IS,,ISO 20957-1:2013,Stationary training equipment — Part 1: General safety requirements and test methods,Équipement d'entraînement fixe — Partie 1: Exigences générales de sécurité et méthodes d'essai,2013-09-03,2,['97.220.30'],ISO/TC 83,9599,[39903],[81908],"['en','fr']",16,"<p>ISO 20957-1:2013 specifies general safety requirements and test methods for stationary training equipment. ISO 20957-1:2013 also covers environmental aspects.</p><p>It also specifies a classification system.</p><p>ISO 20957-1:2013 is applicable to all stationary training equipment. This includes equipment for use in training areas of organizations such as sport associations, educational establishments, hotels,

43644,IS,,ISO 20957-10:2007,"Stationary training equipment — Part 10: Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods","Équipement d'entraînement fixe — Partie 10: Bicyclettes d'exercice avec une roue fixe ou sans roue libre, exigences spécifiques de sécurité et méthodes d'essai supplémentaires",2007-09-13,1,['97.220.30'],ISO/TC 83,9599,,[56549],['en'],8,"<p>ISO 20957-10:2007 specifies safety requirements for exercise bicycles with a fixed wheel or without freewheel, which have an inertia greater than 0,6 kg·m² in addition to the general safety requirements of ISO 20957-1. This part of ISO 20957 should be read in

39904,IS,,ISO 20957-2:2005,"Stationary training equipment — Part 2: Strength training equipment, additional specific safety requirements and test methods","Équipement d'entraînement fixe — Partie 2: Équipement d'entraînement de force, exigences spécifiques de sécurité et méthodes d'essai supplémentaires",2005-12-09,1,['97.220.30'],ISO/TC 83,9599,,[77100],"['en','fr']",10,"<p>ISO 20957-2:2005 specifies additional safety requirements for strength training equipment in addition to the general safety requirements of ISO 20957-1:2005.</p><p>ISO 20957-2:2005 is applicable to stationary training equipment type strength training equipment with stack weight resistance or other means of resistance lik

77100,IS,,ISO 20957-2:2020,"Stationary training equipment — Part 2: Strength training equipment, additional specific safety requirements and test methods","Équipement d'entraînement fixe — Partie 2: Équipement d'entraînement de force, exigences spécifiques de sécurité et méthodes d'essai supplémentaires",2020-08-17,2,['97.220.30'],ISO/TC 83,9599,[39904],[83392],"['en','fr']",18,"<p>This document specifies additional safety requirements for stationary strength training equipment. </p><p>This document is intended to be read in conjunction with the general safety requirements of ISO 20957‑1.</p><p>This document is applicable to stationary training equipment type strength training equipment wit

39905,IS,,ISO 20957-4:2005,"Stationary training equipment — Part 4: Strength training benches, additional specific safety requirements and test methods",Équipement d'entraînement fixe — Partie 4: Bancs pour haltères — Exigences spécifiques de sécurité et méthodes d'essai supplémentaires,2005-04-27,1,['97.220.30'],ISO/TC 83,9599,,[66870],['en'],4,<p>ISO 20957-4:2005 specifies safety requirements for stationary strength training benches and free-standing barbell racks used to perform exercises during use in addition to the general safety requirements of ISO 20957-1.</p><p>ISO 20957-4:2005 is applicable to stationary training equipment type benches (type 4) (referred to as benches) with the cla

39906,IS,,ISO 20957-5:2005,"Stationary training equipment — Part 5: Pedal crank training equipment, additional specific safety requirements and test methods",Équipement d'entraînement fixe — Partie 5: Équipement d'entraînement à pédales — Exigences spécifiques de sécurité et méthodes d'essai supplémentaires,2005-04-27,1,['97.220.30'],ISO/TC 83,9599,,[66438],['en'],15,"<p>ISO 20957-5:2005 specifies safety requirements for pedal crank training equipment in addition to the general safety requirements of ISO 20957-1.</p><p>ISO 20957-5:2005 is applicable to stationary training equipment type pedal crank training equipment (type 5) within the classes S, H and A, B, C.</p><p>Any attachment provided

39907,IS,,ISO 20957-6:2005,"Stationary training equipment — Part 6: Treadmills, additional specific safety requirements and test methods",Équipement d'entraînement fixe — Partie 6: Simulateurs de course — Exigences spécifiques de sécurité et méthodes d'essai supplémentaires,2005-04-27,1,['97.220.30'],ISO/TC 83,9599,,[80969],"['en','fr']",10,"<p>ISO 20957-6:2005 specifies safety requirements for treadmills in addition to the general safety requirements of ISO 20957-1 and should be read in conjunction with it.</p><p>ISO 20957-6:2005 is applicable to power driven and manually driven training equipment type treadmills (type 6) (hereafter referred to as treadmills) with the classes S and H and cl

39908,IS,,ISO 20957-7:2005,"Stationary training equipment — Part 7: Rowing machines, additional specific safety requirements and test methods",Équipement d'entraînement fixe — Partie 7: Rameurs — Exigences spécifiques de sécurité et méthodes d'essai supplémentaires,2005-04-27,1,['97.220.30'],ISO/TC 83,9599,,[77101],['en'],9,"<p>ISO 20957-7:2005 specifies safety requirements for rowing machines in addition to the general safety requirements of ISO 20957-1 and should be read in conjunction with it.</p><p>ISO 20957-7:2005 is applicable to stationary training equipment type rowing machines (type 7), referred to as rowing machines, within the classes S and H and class A regarding accuracy.</p><p>

77101,IS,,ISO 20957-7:2020,"Stationary training equipment — Part 7: Rowing equipment, additional specific safety requirements and test methods","Équipement d'entraînement fixe — Partie 7: Rameurs, exigences spécifiques de sécurité et méthodes d'essai supplémentaires",2020-10-08,2,['97.220.30'],ISO/TC 83,9599,[39908],[83393],"['en','fr']",9,"<p>This document specifies safety requirements for rowing equipment. </p><p>This document is intended to be read in conjunction with the general safety requirements of ISO 20957‑1.</p><p>This document is applicable to rowing type stationary training equipment, hereinafter referred to as rowing equipment, within the classes H, S and I and classes A, B and

39909,IS,,ISO 20957-8:2005,"Stationary training equipment — Part 8: Steppers, stairclimbers and climbers — Additional specific safety requirements and test methods","Équipement d'entraînement fixe — Partie 8: Monte-escaliers, escalators et simulateurs d'escalade — Exigences spécifiques de sécurité et méthodes d'essai supplémentaires",2005-04-27,1,['97.220.30'],ISO/TC 83,9599,,"[70975,66871]",['en'],9,"<p>ISO 20957-8:2005 specifies safety requirements for stepper, stairclimber and climber machines (called training equipment) in addition to the general safety requirements of ISO 20957-1 and should be read in conjunction with it.</p><p>20957-8:2005 is applicable to stationary training equipment

39910,IS,,ISO 20957-9:2005,"Stationary training equipment — Part 9: Elliptical trainers, additional specific safety requirements and test methods",Équipement d'entraînement fixe — Partie 9: Appareils d'entraînement elliptiques — Exigences spécifiques de sécurité et méthodes d'essai supplémentaires,2005-04-27,1,['97.220.30'],ISO/TC 83,9599,,[65442],"['en','fr']",8,<p>ISO 20957-9:2005 specifies safety requirements for elliptical trainers also described as cross training machines in addition to the general safety requirements of ISO 20957-1 and should be read in conjunction with it.</p>

35591,IS,,ISO 20965:2005,Plastics — Determination of the transient extensional viscosity of polymer melts,Plastiques — Détermination de la viscosité élongationelle transitoire des polymères à l'état fondu,2005-03-01,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[80005],['en'],18,"<p>ISO 20965:2005 specifies the general principles of a method for determining the transient extensional viscosity of polymer melts. The procedure details the measurement of polymer melt specimens stretched uniaxially under conditions of constant strain rate and constant temperature.</p><p>The method is capable of measuring the transient extensional viscosity of polymer melts at Hencky strain rates typically in the range 0,0

43468,IS,,ISO 20998-2:2013,Measurement and characterization of particles by acoustic methods — Part 2: Guidelines for linear theory,Caractérisation des particules par des méthodes acoustiques — Partie 2: Théorie linéaire,2013-08-07,1,['19.120'],ISO/TC 24/SC 4,9599,,[78454],['en'],31,"<p>ISO 20998-2:2013 describes ultrasonic attenuation spectroscopy methods for determining the size distributions of a particulate phase dispersed in a liquid at dilute concentrations, where the ultrasonic attenuation spectrum is a linear function of the particle volume fraction. In this regime, particle?particle interactions are negligible. Colloids, dilute dispersions, and emulsions are within the scope of ISO

3606,IS,,ISO 21:1983,Shipbuilding — Inland navigation — Cable-lifters for stud-link anchor chains,Construction navale — Navigation intérieure — Barbotins pour les chaînes d'ancre étançonnées,1983-12-01,1,['47.060'],ISO/TC 8/SC 4,9599,,[3607],"['en','fr']",4,

6888,IS,,ISO 2100:1972,Tests for aircraft electrical plug and socket connectors,Essais des connecteurs électriques pour aéronefs,1972-12-01,1,['49.060'],ISO/TC 20/SC 1,9599,,[6889],"['en','fr']",11,

66266,IS,,ISO 21001:2018,Educational organizations — Management systems for educational organizations — Requirements with guidance for use,Organismes d'éducation/formation — Systèmes de management des organismes d'éducation/formation — Exigences et recommandations pour leur application,2018-04-30,1,"['03.100.70','03.180']",ISO/TC 232,9599,[53392],"[82671,86809]","['en','es','fr']",63,"<p>ISO 21001:2018 specifies requirements for a management system for educational organizations (EOMS) when such an organization:</p><p>a) needs to demonstrate its ability to support the acquisition and development of competence through teaching, learning or research;</p><p>b) aims to enhan

88406,IS,Amd,ISO 21001:2018/Amd 1:2024,Educational organizations — Management systems for educational organizations — Requirements with guidance for use — Amendment 1: Climate action changes,Organismes d'éducation/formation — Systèmes de management des organismes d'éducation/formation — Exigences et recommandations pour leur application — Amendement 1: Changements concernant les actions en lien avec le climat,2024-02-23,1,"['03.100.70','03.180']",ISO/TC 232,9599,,[86809],"['en','es','fr']",1,

34364,IS,,ISO 21005:2004,Ships and marine technology — Thermally toughened safety-glass panes for windows and side scuttles,Navires et technologie maritime — Verres de sécurité trempés thermiquement pour fenêtres et hublots,2004-09-24,1,['47.020.05'],ISO/TC 8/SC 8,9599,"[8468,5601]",[54519],"['en','ru']",6,"<p>ISO 21005:2004 specifies materials and finish, dimensions for interchangeability, tolerances, parallelism and flatness, testing, marking and designation of thermally toughened safety glass panes for windows complying with ISO 3903 and side scuttles complying with ISO 1751.</p>"

54519,IS,,ISO 21005:2012,Ships and marine technology — Thermally toughened safety glass panes for windows and side scuttles,Navires et technologie maritime — Verres de sécurité trempés thermiquement pour fenêtres et hublots,2012-06-20,2,['47.020.05'],ISO/TC 8/SC 8,9599,[34364],[69966],"['en','ru']",6,

36224,IS,,ISO 21007-2:2005,Gas cylinders — Identification and marking using radio frequency identification technology — Part 2: Numbering schemes for radio frequency identification,Bouteilles à gaz — Identification et marquage à l'aide de la technologie d'identification par radiofréquences — Partie 2: Schémas de numérotage pour identification par radiofréquences,2005-08-08,1,['23.020.35'],ISO/TC 58/SC 4,9599,,[54462],['en'],45,"<p>ISO 21007-2:2005 establishes a common framework for data structure to enable the unambiguous identification in gas cylinder applications and for other common data elements in this sector.</p><p>ISO 21007-2:2005 enables a structure to allow some harmonization betwee

54462,IS,,ISO 21007-2:2013,Gas cylinders — Identification and marking using radio frequency identification technology — Part 2: Numbering schemes for radio frequency identification,Bouteilles à gaz — Identification et marquage à l'aide de la technologie d'identification par radiofréquences — Partie 2: Schémas de numérotage pour identification par radiofréquences,2013-01-28,2,['23.020.35'],ISO/TC 58/SC 4,9599,[36224],[63131],"['en','fr']",49,"<p>ISO 21007-2:2013 establishes a common framework for data structure to enable the unambiguous identification in gas cylinder (GC) applications and for other common data elements in this sector.</p><p>It enables a structure to allow some harmonization b

44616,IS,,ISO 21009-1:2008,"Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests","Récipients cryogéniques — Récipients isolés sous vide statiques — Partie 1: Exigences de conception de fabrication, d'inspection, et d'essais",2008-09-01,1,['23.020.40'],ISO/TC 220,9599,,[76098],['en'],124,"<p>ISO 21009-1:2008 specifies requirements for the design, fabrication, inspection and testing of static vacuum-insulated cryogenic vessels designed for a maximum allowable pressure of more than 0,5 bar.</p><p>It applies to specified static vacuum-insulated cryogenic vessels for fluids, and does not apply to vessels designed for toxic fluids.</p><p>For stat

34489,IS,,ISO 21009-2:2006,Cryogenic vessels — Static vacuum insulated vessels — Part 2: Operational requirements,Récipients cryogéniques — Récipients fixes isolés sous vide — Partie 2: Exigences de fonctionnement,2006-10-11,1,['23.020.40'],ISO/TC 220,9599,,[57009],['en'],14,"<p>ISO 21009-2:2006 specifies operational requirements for static vacuum insulated vessels designed for a maximum allowable pressure of more than 0,5 bar (50 kPa). It may also be used as a guideline for vessels designed for a maximum allowable pressure of less than 0,5 bar (50 kPa).</p><p>ISO 21009-2:2006 applies to vessels designed for cryogenic fluids specified in EN 13458-1 and EN 13458-2.</p><p>Static cryogenic vess

57009,IS,,ISO 21009-2:2015,Cryogenic vessels — Static vacuum insulated vessels — Part 2: Operational requirements,Récipients cryogéniques — Récipients fixes isolés sous vide — Partie 2: Exigences de fonctionnement,2015-11-18,2,['23.020.40'],ISO/TC 220,9599,[34489],[85191],"['en','fr','ru']",15,"<p>ISO 21009-2:2015 specifies operational requirements for static vacuum insulated vessels designed for a maximum allowable pressure of more than 50 kPa (0,5 bar). It may also be used as a guideline for vessels designed for a maximum allowable pressure of less than 50 kPa (0,5 bar).</p><p>ISO 21009-2:2015 applies to vessels designed for cryogenic fluids specified in ISO 21009‑1.</p><p>Static cryogenic

34373,IS,,ISO 21010:2004,Cryogenic vessels — Gas/materials compatibility,Récipients cryogéniques — Compatibilité gaz/matériaux,2004-03-30,1,['23.020.40'],ISO/TC 220,9599,,[64650],['en'],15,<p>ISO 21010:2004 specifies gas/materials compatibility requirements (such as chemical resistance) for cryogenic vessels but it does not cover mechanical properties (e.g. for low temperature applications).</p><p>It gives general guidance for compatibility with gases and detailed compatibility requirements for oxygen and oxygen-enriched atmospheres.</p><p>ISO 21010:2004 also defines the testing methods for establishing oxygen compatibility of materials (metallic and non-metallic) to be used for cryogenic ve

64650,IS,,ISO 21010:2014,Cryogenic vessels — Gas/materials compatibility,Récipients cryogéniques — Compatibilité gaz/matériaux,2014-05-07,2,['23.020.40'],ISO/TC 220,9599,[34373],[70957],['en'],15,"<p>ISO 21010:2014 specifies gas/materials compatibility requirements (such as chemical resistance) for cryogenic vessels, but it does not cover mechanical properties (e.g. for low temperature applications).</p><p>It gives general guidance for compatibility with gases and detailed compatibility requirements for oxygen and oxygen-enriched atmospheres. ISO 21010:2014 also defines the testing methods for establishing oxygen compatibility of materials (metallic and non-metallic) to be used for cryogenic

34376,IS,,ISO 21012:2006,Cryogenic vessels — Hoses,Récipients cryogéniques — Tuyaux,2006-10-31,1,"['23.020.40','83.140.40']",ISO/TC 220,9599,,[64651],['en'],14,"<p>ISO 21012:2006 gives design, construction, type and production testing, and marking requirements for non-insulated cryogenic flexible hoses used for the transfer of cryogenic fluids within the following range of operating conditions:</p><ul><li>working temperature: from minus 270 °C to minus 65 °C;</li><li>nominal size (DN): from 10 to 100.</li></ul><p>End fittings for mounting of any couplings are within the scope of this International Standard, but the couplings are subject to other standards.</p>"

64651,IS,,ISO 21012:2018,Cryogenic vessels — Hoses,Récipients cryogéniques — Tuyaux flexibles,2018-03-16,2,"['23.020.40','83.140.40']",ISO/TC 220,9599,[34376],[81290],"['en','fr']",15,"<p>ISO 21012:2018 specifies design, construction, type and production testing, and marking requirements for non-insulated cryogenic flexible hoses used for the transfer of cryogenic fluids within the following range of operating conditions:</p><p>- working temperature: from −270 °C to +65 °C;</p><p>- nominal size (DN): from 10 to 100.</p><p>End fittings for mounting of any couplings are within the scope of this document, but the couplings are subject to other standards.</p><p>ISO 21012:2018 is intend

44631,IS,,ISO 21013-1:2008,Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 1: Reclosable pressure-relief valves,Récipients cryogéniques — Dispositifs de sécurité pour le service cryogénique — Partie 1: Soupapes refermables,2008-05-27,1,['23.020.40'],ISO/TC 220,9599,,[76417],['en'],10,"<p>ISO 21013 specifies the requirements for the design, manufacture and testing of pressure relief valves for cryogenic service, i.e. for operation with cryogenic fluids in addition to operation at temperatures from ambient to cryogenic. It is a requirement of ISO 21013 that the valves comply with ISO 4126-1; in the event of different requirements, ISO 21013 takes precedence.</p><p>

36740,IS,,ISO 21013-2:2007,Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 2: Non-reclosable pressure-relief devices,Récipients cryogéniques — Dispositifs de sécurité pour le service cryogénique — Partie 2: Dispositifs de sécurité non refermables,2007-06-01,1,['23.020.40'],ISO/TC 220,9599,,[85194],['en'],6,"<p>ISO 21013-2:2007 specifies the requirements for the design, manufacture and testing of non‑reclosable pressure‑relief devices for cryogenic service, i.e. for operation with cryogenic fluids in addition to operation at temperatures from ambient to cryogenic. </p><p>ISO 21013-2:2007 is restricted to bursting‑disc and buckling‑pin devices not exceeding a size

74045,IS,Amd,ISO 21013-2:2007/Amd 1:2018,Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 2: Non-reclosable pressure-relief devices — Amendment 1,Récipients cryogéniques — Dispositifs de sécurité pour le service cryogénique — Partie 2: Dispositifs de sécurité non refermables — Amendement 1,2018-07-17,1,['23.020.40'],ISO/TC 220,9599,,[85194],['en'],1,

36741,IS,,ISO 21013-3:2006,Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 3: Sizing and capacity determination,Récipients cryogéniques — Dispositifs de sécurité pour le service cryogénique — Partie 3: Détermination de la taille et du volume,2006-01-09,1,['23.020.40'],ISO/TC 220,9599,,[56919],['en'],8,"<p>ISO 21013-3:2006 provides separate calculation methods for determining the required mass flow to be relieved for each of the following specified conditions.</p><ul><li>Vacuum-insulated vessels with insulation system (outer jacket + insulating material) intact under normal vacuum; outer jacket at ambient temperature; inner vessel at temperature of the contents at

34378,IS,,ISO 21014:2006,Cryogenic vessels — Cryogenic insulation performance,Récipients cryogéniques — Performances d'isolation cryogénique,2006-07-26,1,['23.020.40'],ISO/TC 220,9599,,[69613],['en'],15,<p>ISO 21014:2006 defines practical methods for determining the heat-leak performance of cryogenic vessels. The methods include measurement on both open and closed systems.</p><p>ISO 21014:2006 neither specifies the requirement levels for insulation performance nor when the defined methods should be applied. These requirements may be defined in design or operational standards/regulations.</p>

35609,IS,,ISO 21016:2007,"Office furniture — Tables and desks — Test methods for the determination of stability, strength and durability","Mobilier de bureau — Tables et bureaux — Méthodes d'essai pour la détermination de la stabilité, de la résistance et de la durabilité",2007-06-25,1,['97.140'],ISO/TC 136,9599,,[73590],['en'],16,"<p>ISO 21016:2007 specifies test methods for the determination of the stability, the strength and the durability of all types of office tables designed for use in the seated and/or standing position, e.g. work tables, height-adjustable tables, meeting tables and desks. It applies to tables that are fully assembled and ready for use.</p><p>ISO 21016:2007 does not c

35611,IS,,ISO 21018-1:2008,Hydraulic fluid power — Monitoring the level of particulate contamination of the fluid — Part 1: General principles,Transmissions hydrauliques — Surveillance du niveau de pollution particulaire des fluides — Partie 1: Principes généraux,2008-04-16,1,['23.100.60'],ISO/TC 131/SC 6,9599,,"[69538,84019]","['en','fr']",24,"<p>ISO 21018-1:2008 specifies methods and techniques that are applicable to the monitoring of particulate contamination levels in hydraulic systems. It also describes the relative merits of various techniques so that the correct monitor for a given application can be selected.</p><p>The techniques described in ISO 21018-1:2008 are suitable for monitor

61846,IS,,ISO 21018-4:2016,Hydraulic fluid power — Monitoring the level of particulate contamination in the fluid — Part 4: Use of the light extinction technique,Transmissions hydrauliques — Surveillance du niveau de pollution particulaire des fluides — Partie 4: Technique d'absorption de lumière,2016-10-24,1,['23.100.60'],ISO/TC 131/SC 6,9599,,[72620],"['en','fr']",11,"<p>ISO 21018-4:2016 specifies a method for the determination of the particulate contamination level using the light extinction technique (also known as light blockage or light obscuration) either online or off-line in containers. It also defines procedures for calibrating the instruments and verifying their correct operation

34381,IS,,ISO 21028-1:2004,Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 1: Temperatures below -80 degrees C,Récipients cryogéniques — Exigences de ténacité pour les matériaux à température cryogénique — Partie 1: Températures inférieures à -80 degrés C,2004-07-02,1,['23.020.40'],ISO/TC 220,9599,,[64259],['en'],6,<p>ISO 21028-1:2004 specifies the toughness requirements of metallic materials for use at temperatures below -80 °C to ensure their suitability for cryogenic vessels. It is not applicable to unalloyed steels and cast materials.</p>

35636,IS,,ISO 21028-2:2004,Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 2: Temperatures between -80 degrees C and -20 degrees C,Récipients cryogéniques — Exigences de ténacité pour les matériaux à température cryogénique — Partie 2: Températures comprises entre -80 degrés C et -20 degrés C,2004-04-14,1,['23.020.40'],ISO/TC 220,9599,,[64260],['en'],21,"<p>ISO 21028-2:2004 specifies the toughness requirements of metallic materials for use at temperatures between -20 °C and -80 °C to ensure their suitability for cryogenic vessels. It is applicable to fine-grain and low-alloyed steels with specified yield strength less than or equal to 460 N/mm<sup>2</

34383,IS,,ISO 21029-1:2004,"Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 1: Design, fabrication, inspection and tests","Récipients cryogéniques — Récipients transportables, isolés sous vide, d'un volume n'excédant pas 1 000 litres — Partie 1: Conception, fabrication, inspection et essais",2004-11-26,1,['23.020.40'],ISO/TC 220,9599,,[65433],['en'],90,"<p>ISO 21029-1:2004 specifies requirements for the design, fabrication, inspection and testing of transportable vacuum-insulated cryogenic vessels of not more than 1 000 l volume designed to operate at a maximum permissible pressure greater than atmospheric.</p><p>ISO 21029-1:2004 applies

34490,IS,,ISO 21029-2:2004,Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 2: Operational requirements,"Récipients cryogéniques — Récipients transportables, isolés, sous vide, d'un volume n'excédant pas 1 000 litres — Partie 2: Prescriptions de fonctionnement",2004-05-21,1,['23.020.40'],ISO/TC 220,9599,,[56922],['en'],14,"<p>ISO 21029-2:2004 specifies operational requirements for transportable vacuum insulated cryogenic vessels of not more than 1 000 l volume designed to operate above atmospheric pressure. Appropriate parts may be used as a guidance for a vessel design to operate open to the atmosphere.</p><p>The scope includes putting i