Withdrawn and superseded ISO standards — page 69 of 246

63791,IS,,ISO 19043:2015,Natural rubber latex concentrate — Determination of total phosphate content by spectrophotometric method,Concentré de latex de caoutchouc naturel — Détermination de la teneur totale en phosphate par méthode spectrophotométrique,2015-09-01,1,['83.040.10'],ISO/TC 45/SC 3,9599,,[83147],['en'],6,<p>ISO 19043:2015 specifies a method for the determination of total phosphate content of natural rubber latex concentrate. This method is not necessarily suitable for latex from natural sources other than the <i>Hevea brasiliensis</i>.</p>

63793,IS,,ISO 19044:2016,Test methods for fibre-reinforced cementitious composites — Load-displacement curve using notched specimen,Méthodes d'essai des composites à base de ciment renforcés par des fibres — Courbe de déplacement de charge utilisant un échantillon entaillé,2016-10-31,1,"['83.120','91.100.30']",ISO/TC 71/SC 6,9599,,[86243],['en'],10,<p>ISO 19044:2016 specifies the test method for the load-displacement curves of fibre-reinforced cementitious composites (FRCC) by three-point loading of notched prisms. The main purpose of this test is to evaluate the tension softening curve of FRCC.</p>

63828,IS,,ISO 19050:2015,"Rubber, raw, vulcanised — Determination of metal content by ICP-OES","Caoutchouc brut, vulcanisé — Dosage de la teneur en métaux par ICP-OES",2015-09-21,1,['83.040.10'],ISO/TC 45/SC 2,9599,,[82450],['en'],12,"<p>ISO 19050:2015 describes the method of determination of both major and trace levels of metal contents in rubber ? raw, vulcanized ? by ICP-OES.</p>"

66828,IS,,ISO 19069-2:2016,Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Polypropylène (PP) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,2016-02-11,1,['83.080.20'],ISO/TC 61/SC 9,9599,[42465],[83765],"['en','fr']",8,"<p>ISO 19069-2:2016 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polypropylene (PP) moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing ar

38954,IS,,ISO 19072-1:2007,"Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 1: Pocket interface definition","Véhicules routiers — Interface de raccordement pour dispositifs pyrotechniques, deux voies et trois voies — Partie 1: Définition de l'interface du support allumeur",2007-09-25,1,['43.040.10'],ISO/TC 22,9599,,[59606],"['en','fr']",6,<p>ISO 19072-1:2007 defines a common specification of the pyrotechnic device pocket interface. It also defines a sealed variant of the design.</p>

59606,IS,,ISO 19072-1:2014,"Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 1: Pocket interface definition","Véhicules routiers — Interface de raccordement pour dispositifs pyrotechniques, deux voies et trois voies — Partie 1: Définition de l'interface du support allumeur",2014-06-13,2,['43.040.10'],ISO/TC 22/SC 32,9599,[38954],[71992],['en'],7,<p>ISO 19072-1:2014 defines the minimum specification of the pyrotechnic device pocket interface.</p>

43990,IS,,ISO 19072-2:2007,"Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 2: Test methods and general performance requirements","Véhicules routiers — Interface de raccordement pour dispositifs pyrotechniques, deux voies et trois voies — Partie 2: Méthodes d'essai et exigences des performances générales",2007-09-25,1,['43.040.10'],ISO/TC 22,9599,,[59607],"['en','fr']",19,"<p>ISO 19072-2:2007 defines the performance criteria and requirements of a three-way connection interface, including ground connection, linking the pyrotechnic device and harness connector built into a road vehicle.</p><p>Performance criteria and requirements are also

59607,IS,,ISO 19072-2:2013,"Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 2: Test methods and general performance requirements","Véhicules routiers — Interface de raccordement pour dispositifs pyrotechniques, deux voies et trois voies — Partie 2: Méthodes d'essai et exigences des performances générales",2013-08-27,2,['43.040.10'],ISO/TC 22/SC 32,9599,[43990],[74391],"['en','fr']",19,"<p>ISO 19072-2:2013 defines the performance criteria and requirements of a three-way connection interface, including ground connection, linking the pyrotechnic device and harness connector built into a road vehicle.</p><p>Performance criteria and requireme

63877,IS,,ISO 19076:2016,Leather — Measurement of leather surface — Using electronic techniques,Cuir — Mesurage de la surface du cuir — Utilisation de techniques électroniques,2016-08-04,1,['59.140.30'],IULTCS,9599,,[84414],"['en','fr']",14,"<p>ISO 19076:2016 provides a method for the measurement of the surface of leather or leather parts by the use of electronic measuring machines.</p><p>It applies to the measurement of leather (or leather parts) fulfilling the following requirements:</p><p>- flexible leather, finished or unfinished, dry or wet leather;</p><p>- flexibility: such to allow full distension on the measuring line/surface.</p>"

42705,IS,,ISO 19078:2006,"Gas cylinders — Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles","Bouteilles à gaz — Inspection de l'installation des bouteilles, et requalification des bouteilles haute pression pour le stockage du gaz naturel, utilisé comme carburant, à bord des véhicules automobiles",2006-09-29,1,"['43.060.40','23.020.35']",ISO/TC 58/SC 4,9599,,[51026],"['en','ru']",33,"<p>ISO 19078:2006 specifies the requirements for the inspection of the cylinder installation and the requalification of high pressure cylinders, designed and manufactured in accordance with ISO 11439,

63896,IS,,ISO 19085-1:2017,Woodworking machines — Safety — Part 1: Common requirements,Machines à bois — Sécurité — Partie 1: Exigences communes,2017-07-20,1,"['79.120.10','13.110']",ISO/TC 39/SC 4,9599,,[77655],"['en','fr']",47,"<p>ISO 19085-1:2017 gives the safety requirements and measures to reduce risks related to woodworking machines arising during operation, adjustment, maintenance, transport, assembly, dismantling, disabling and scrapping and which are common to machines used in the woodworking industry. It is applicable to woodworking, stationary and displaceable machines when they are used as intended and under the conditions foreseen by the manufacturer.</p><p>NOTE 1 For rele

67638,IS,,ISO 19085-11:2020,Woodworking machines — Safety — Part 11: Combined machines,Machines à bois — Sécurité — Partie 11: Machines combinées,2020-03-20,1,"['79.120.10','13.110']",ISO/TC 39/SC 4,9599,,[84420],"['en','fr']",27,"<p>This document gives the safety requirements and measures for stationary and displaceable combined woodworking machines, having at least two separately usable working units and with manual loading and unloading of the workpiece, hereinafter referred to as 'machines'. The integrated working units can be of these types only:</p><p>— a sawing unit;</p><p>— a moulding unit;</p><p>— a planing unit.</p><p>The machines are designed to cut solid wood and mate

67639,IS,,ISO 19085-12:2021,Woodworking machines — Safety — Part 12: Tenoning/profiling machines,Machines à bois — Sécurité — Partie 12: Machines à tenonner/profiler,2021-03-24,1,"['79.120.10','13.110']",ISO/TC 39/SC 4,9599,,[84478],"['en','fr']",53,"<p>This document gives the safety requirements and measures for stationary, manually loaded and unloaded:</p><p>— single end tenoning machines with manual feed sliding table;</p><p>— single end tenoning machines with mechanical feed sliding table;</p><p>— single end tenoning and/or profiling machines with mechanical feed;</p><p>— double end tenoning and/or profiling machines with mechanical feed, also designed to be automatically

67640,IS,,ISO 19085-13:2020,Woodworking machines — Safety — Part 13: Multi-blade rip sawing machines with manual loading and/or unloading,Machines à bois — Sécurité — Partie 13: Déligneuses multi-lames à chargement et/ou déchargement manuel,2020-05-11,1,"['79.120.10','13.110']",ISO/TC 39/SC 4,9599,,[84480],"['en','fr']",40,"<p>This document gives the safety requirements and measures for stationary multi-blade rip sawing machines manually loaded and/or unloaded, hereinafter referred to as 'machines', designed to cut solid wood and material with similar physical characteristics to wood.</p><p>It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant

71274,IS,,ISO 19085-15:2021,Woodworking machines — Safety — Part 15: Presses,Machines à bois — Sécurité — Partie 15: Presses,2021-10-14,1,"['79.120.10','13.110']",ISO/TC 39/SC 4,9599,,[83923],"['en','fr']",42,"<p>This document gives the safety requirements and measures for stationary manually loaded and unloaded:</p><p>— cold presses;</p><p>— hot presses;</p><p>— bending presses;</p><p>— edge/face gluing presses;</p><p>— membrane presses;</p><p>— embossing presses;</p><p>where the pressing force is applied by hydraulic actuators pushing two flat or shaped surfaces against each other, hereinafter referred to as 'machines'.</p><p>It deals with all significant hazards, hazardo

63897,IS,,ISO 19085-2:2017,Woodworking machines — Safety — Part 2: Horizontal beam panel circular sawing machines,Machines à bois — Sécurité — Partie 2: Scies circulaires à panneaux horizontales à presseur,2017-07-20,1,"['79.120.10','13.110']",ISO/TC 39/SC 4,9599,,[80518],"['en','fr']",35,"<p>ISO 19085-2:2017 gives the safety requirements and measures for horizontal beam panel circular sawing machines with the saw carriage of the front cutting line mounted below the work-piece support, which are manually and/or powered loaded and manually unloaded, hereinafter referred to as 'machines'.</p><p>ISO 19085-2:2017 deals with all significant hazards, hazardous situations and events as listed in Cl

63898,IS,,ISO 19085-3:2017,Woodworking machines — Safety requirements — Part 3: Numerically controlled (NC) boring and routing machines,Machines à bois — Sécurité — Partie 3: Perceuses et défonceuses à commande numérique (CN),2017-10-30,1,"['79.120.10','13.110']",ISO/TC 39/SC 4,9599,,[75953],"['en','fr']",64,"<p>ISO 19085-3:2017 gives the safety requirements and measures for numerically controlled (NC) boring machines, NC routing machines and NC combined boring/routing machines (as defined in 3.1), hereinafter referred to as 'machines'.</p><p>ISO 19085-3:2017 deals with all significant hazards, hazardous situations and events, listed in Clause 4, relevant to the machines when they are operat

63899,IS,,ISO 19085-4:2018,Woodworking machines — Safety — Part 4: Vertical panel circular sawing machines,Machines à bois — Sécurité — Partie 4: Scies circulaires à panneaux verticales,2018-03-15,1,"['79.120.10','13.110']",ISO/TC 39/SC 4,9599,,[82337],"['en','fr']",30,"<p>ISO 19085-4:2018 gives the safety requirements and measures for manually loaded and unloaded stationary vertical panel sawing machines, hereinafter referred to as 'machines'.</p><p>NOTE 1 In manual loading, the operator puts the work-piece directly onto the work-piece support, with no intermediate loading device to receive and transfer the work-piece from the operator to the cutting position. In manual unloading, the op

63900,IS,,ISO 19085-5:2017,Woodworking machines — Safety — Part 5: Dimension saws,Machines à bois — Sécurité — Partie 5: Scies au format,2017-07-20,1,"['79.120.10','13.110']",ISO/TC 39/SC 4,9599,,[82159],"['en','fr']",50,"<p>ISO 19085-5:2017 gives the safety requirements and measures for stationary and displaceable dimension saws, hereinafter referred to as 'machines', designed to cut wood and material with similar physical characteristics to wood.</p><p>NOTE 1 For the definitions of stationary and displaceable machines, see ISO 19085‑1:2017, 3.4 and 3.5.</p><p>ISO 19085-5:2017 deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the ma

66333,IS,,ISO 19085-6:2017,Woodworking machines — Safety — Part 6: Single spindle vertical moulding machines ('toupies'),Machines à bois — Sécurité — Partie 6: Toupies monobroches à arbre vertical,2017-11-02,1,"['79.120.10','13.110']",ISO/TC 39/SC 4,9599,,[82160],"['en','fr']",53,"<p>ISO 19085-6:2017 gives the safety requirements and measures for stationary and displaceable hand-fed single spindle vertical moulding machines, hereinafter referred to as 'machines', designed to cut wood and materials with similar physical characteristics to wood.</p><p>NOTE 1 For the definitions of stationary and displaceable machines, see ISO 19085‑1:2017, 3.4 and 3.5.</p><p>It deals with all significant ha

66780,IS,,ISO 19085-7:2019,"Woodworking machines — Safety — Part 7: Surface planing, thickness planing, combined surface/thickness planing machines","Machines à bois — Sécurité — Partie 7: Machines à dégauchir, à raboter et machines combinées à dégauchir/raboter",2019-06-04,1,"['79.120.10','13.110']",ISO/TC 39/SC 4,9599,,[84418],"['en','fr']",43,"<p>This document gives the safety requirements and measures for stationary and displaceable</p><p>— surface planing machines, also called jointers,</p><p>— thickness planing machines, also called planers or single surface planers,</p><p>— combined surface/thickness planing machines</p><p>with fixed cutterblock position, wi

67635,IS,,ISO 19085-8:2017,Woodworking machines — Safety — Part 8: Belt sanding and calibrating machines for straight workpieces,Machines à bois — Sécurité — Partie 8: Machines de ponçage et de calibrage à bande pour pièces droites,2017-12-01,1,"['79.120.10','13.110']",ISO/TC 39/SC 4,9599,,[82338],"['en','fr']",29,"<p>ISO 19085-8:2017 gives the safety requirements and measures for stationary calibrating and sanding machines, with an integrated feed and one or more sanding belt units positioned above and/or below the work piece level, with manual or automatic loading and/or unloading, hereinafter referred to as 'machines'.</p><p>ISO 19085-8:2017 deals with all significant hazards, hazardous s

67636,IS,,ISO 19085-9:2019,Woodworking machines — Safety — Part 9: Circular saw benches (with and without sliding table),Machines à bois — Sécurité — Partie 9: Scies circulaires à table de menuisier (avec et sans table mobile),2019-04-11,1,"['79.120.10','13.110']",ISO/TC 39/SC 4,9599,,[84419],"['en','fr']",48,"<p>This document gives the safety requirements and measures for stationary and displaceable circular saw benches (with or without sliding table and/or demountable power feed unit), also known as 'table saws' (in the USA), hereinafter referred to as 'machines', designed to cut wood and material with similar physical characteristics to wood.</p><p>NOTE 1 For the definition of stationa

40559,IS,,ISO 19092-1:2006,Financial services — Biometrics — Part 1: Security framework,Services financiers — Biométrie — Partie 1: Cadre de sécurité,2006-12-01,1,"['03.060','35.240.40']",ISO/TC 68/SC 2,9599,,[50145],['en'],81,"<p>ISO 19092-1:2006 describes the security framework for using biometrics for authentication of individuals in financial services. It introduces the types of biometric technologies and addresses issues concerning their application. ISO 19092-1:2006 also describes the architectures for implementation, specifies the minimum security requirements for effective management, and provides control objectives and recommendations suitable for use by a professional practitioner.

50145,IS,,ISO 19092:2008,Financial services — Biometrics — Security framework,Services financiers — Biométrie — Cadre de sécurité,2008-01-07,1,"['03.060','35.240.40']",ISO/TC 68/SC 2,9599,[40559],[78308],['en'],77,"<div id='MathJax_Message' style='display: none;'></div><p>ISO 19092:2008 describes the security framework for using biometrics for authentication of individuals in financial services. It introduces the types of biometric technologies and addresses issues concerning their application. ISO 19092:2008 also describes the architectures for implementation, specifies the minimum security requirements for effective management, and provides control objectives and recommendations suitable f

26002,IS,,ISO 19101:2002,Geographic information — Reference model,Information géographique — Modèle de référence,2002-07-04,1,['35.240.70'],ISO/TC 211,9599,,[59164],['en'],42,"<p>This International Standard defines the framework for standardization in the field of geographic information and sets forth the basic principles by which this standardization takes place.</p><p>This framework identifies the scope of the standardization activity being undertaken and the context in which it takes place. The framework provides the method by which what is to be standardized can be determined and describes how the contents of the standards are related.</p><p>Although structured in the context of informat

56734,IS,,ISO 19103:2015,Geographic information — Conceptual schema language,Information géographique — Langage de schéma conceptuel,2015-12-02,1,['35.240.70'],ISO/TC 211,9599,[37800],[83454],['en'],81,<p>ISO 19103:2015 provides rules and guidelines for the use of a conceptual schema language within the context of geographic information. The chosen conceptual schema language is the Unified Modeling Language (UML).</p><p>ISO 19103.2015 provides a profile of the Unified Modelling Language (UML).</p><p>The standardization target type of this standard is UML schemas describing geographic information.</p>

26010,IS,,ISO 19105:2000,Geographic information — Conformance and testing,Information géographique — Conformité et essais,2000-12-21,1,['35.240.70'],ISO/TC 211,9599,,"[76457,73119]",['en'],21,"<p>This International Standard specifies the framework, concepts and methodology for testing and criteria to be</p><p>achieved to claim conformance to the family of ISO geographic information standards. It provides a framework for</p><p>specifying abstract test suites (ATS) and for defining the procedures to be followed during conformance testing.</p><p>Conformance may be claimed for data or software products or services or by specifications including any profile or</p><p>functional standard.</p><p>Sta

26012,IS,,ISO 19107:2003,Geographic information — Spatial schema,Information géographique — Schéma spatial,2003-05-08,1,['35.240.70'],ISO/TC 211,9599,,[66175],['en'],166,"<p>ISO 19107:2003 specifies conceptual schemas for describing the spatial characteristics of geographic features, and a set of spatial operations consistent with these schemas. It treats vector geometry and topology up to three dimensions. It defines standard spatial operations for use in access, query, management, processing, and data exchange of geographic information for spatial (geometric and topological) objects of up to three topological dimensions embedded in coordinate spaces of up to three axes. </p>"

39891,IS,,ISO 19109:2005,Geographic information — Rules for application schema,Information géographique — Règles de schéma d'application,2005-06-23,1,['35.240.70'],ISO/TC 211,9599,,[59193],['en'],71,"<p>ISO 19109:2005(E) defines rules for creating and documenting application schemas, including principles for the definition of features. Its scope includes the following:</p><ul><li>conceptual modelling of features and their properties from a universe of discourse;</li><li>definition of application schemas;</li><li>use of the conceptual schema language for application schemas;</li><li>transition from the concepts in the conceptual model to the data types in the application schema;</li><li>integ

59193,IS,,ISO 19109:2015,Geographic information — Rules for application schema,Information géographique — Règles de schéma d'application,2015-11-25,2,['35.240.70'],ISO/TC 211,9599,[39891],[84700],"['en','fr','ru']",91,"<p>ISO 19109:2015 defines rules for creating and documenting application schemas, including principles for the definition of features.</p><p>The scope of this International Standard includes the following:</p><p>- conceptual modelling of features and their properties from a universe of discourse;</p><p>- definition of application schemas;</p><p>- use of the conceptual schema language for application schemas;</p><p>- transition from the concepts in the conce

39965,IS,,ISO 19110:2005,Geographic information — Methodology for feature cataloguing,Information géographique — Méthodologie de catalogage des entités,2005-02-11,1,['35.240.70'],ISO/TC 211,9599,,[57303],"['en','fr']",55,"<p>ISO 19110:2005 defines the methodology for cataloguing feature types and specifies how the classification of feature types is organized into a feature catalogue and presented to the users of a set of geographic data. ISO 19110:2005 is applicable to creating catalogues of feature types in previously uncatalogued domains and to revising existing feature catalogues to comply with standard practice. ISO 19110:2005 applies to the cataloguing of feature types that are represen

44459,IS,Amd,ISO 19110:2005/Amd 1:2011,Geographic information — Methodology for feature cataloguing — Amendment 1,Information géographique — Méthodologie de catalogage des entités — Amendement 1,2011-06-17,1,['35.240.70'],ISO/TC 211,9599,,[57303],"['en','fr']",42,

44075,IS,,ISO 19111-2:2009,Geographic information — Spatial referencing by coordinates — Part 2: Extension for parametric values,Information géographique — Système de références spatiales par coordonnées — Partie 2: Supplément pour valeurs paramétriques,2009-08-14,1,['35.240.70'],ISO/TC 211,9599,,[74039],"['en','fr']",16,"<p>ISO 19111-2:2009 specifies the conceptual schema for the description of spatial referencing using parametric values or functions. It applies the schema of ISO 19111 to combine a position referenced by coordinates with a parametric value to form a spatio‑parametric coordinate reference system (CRS). The spatio‑parametric CRS can optionally be extended to include time.</p>

26016,IS,,ISO 19111:2003,Geographic information — Spatial referencing by coordinates,Information géographique — Système de références spatiales par coordonnées,2003-03-04,1,['35.240.70'],ISO/TC 211,9599,,[41126],['en'],43,"<p>ISO 19111:2003 defines the conceptual schema for the description of spatial referencing by coordinates. It describes the minimum data required to define one-, two- and three-dimensional coordinate reference systems. It allows additional descriptive information to be provided. It also describes the information required to change coordinate values from one coordinate reference system to another.</p><p>ISO 19111:2003 is applicable to producers and users of geographic infor

41126,IS,,ISO 19111:2007,Geographic information — Spatial referencing by coordinates,Information géographique — Système de références spatiales par coordonnées,2007-06-26,2,['35.240.70'],ISO/TC 211,9599,[26016],"[70881,74039]","['en','fr']",78,"<p>ISO 19111:2007 defines the conceptual schema for the description of spatial referencing by coordinates, optionally extended to spatio-temporal referencing. It describes the minimum data required to define one-, two- and three-dimensional spatial coordinate reference systems with an extension to merged spatial-temporal reference systems. It allows additional descriptive information to be provided. It also describes the information required to change

26017,IS,,ISO 19112:2003,Geographic information — Spatial referencing by geographic identifiers,Information géographique — Système de références spatiales par identificateurs géographiques,2003-10-21,1,['35.240.70'],ISO/TC 211,9599,,"[54718,70742]",['en'],19,"<p>ISO 19112:2003 defines the conceptual schema for spatial references based on geographic identifiers. It establishes a general model for spatial referencing using geographic identifiers, defines the components of a spatial reference system and defines the essential components of a gazetteer. Spatial referencing by coordinates is not addressed in this document; however, a mechanism for recording complementary coordinate references is i

26018,IS,,ISO 19113:2002,Geographic information — Quality principles,Information géographique — Principes qualité,2002-11-20,1,['35.240.70'],ISO/TC 211,9599,,"[46225,32575]",['en'],29,"<p>ISO 19113:2002 establishes the principles for describing the quality of geographic data and specifies components for reporting quality information. It also provides an approach to organizing information about data quality.</p><p>ISO 19113:2002 is applicable to data producers providing quality information to describe and assess how well a dataset meets its mapping of the universe of discourse as specified in the product specification, formal or implied, and to data users attempting to determine whether or no

26019,IS,,ISO 19114:2003,Geographic information — Quality evaluation procedures,Information géographique — Procédures d'évaluation de la qualité,2003-09-04,1,['35.240.70'],ISO/TC 211,9599,,[32575],['en'],63,"<p>ISO 19114:2003 provides a framework of procedures for determining and evaluating quality that is applicable to digital geographic datasets, consistent with the data quality principles defined in ISO 19113. It also establishes a framework for evaluating and reporting data quality results, either as part of data quality metadata only, or also as a quality evaluation report.</p><p>ISO 19114:2003 is applicable to data producers when providing quality information on how well a dataset conf

42980,IS,Cor,ISO 19114:2003/Cor 1:2005,Geographic information — Quality evaluation procedures — Technical Corrigendum 1,Information géographique — Procédures d'évaluation de la qualité — Rectificatif technique 1,2005-09-15,1,['35.240.70'],ISO/TC 211,9599,,[32575],['en'],2,

39229,IS,,ISO 19115-2:2009,Geographic information — Metadata — Part 2: Extensions for imagery and gridded data,Information géographique — Métadonnées — Partie 2: Extensions pour les images et les matrices,2009-02-03,1,['35.240.70'],ISO/TC 211,9599,,[67039],"['en','fr']",43,"<p>ISO 19115-2:2009 extends the existing geographic metadata standard by defining the schema required for describing imagery and gridded data. It provides information about the properties of the measuring equipment used to acquire the data, the geometry of the measuring process employed by the equipment, and the production process used to digitize the raw data. This extension deals with metadata needed to describe the der

26020,IS,,ISO 19115:2003,Geographic information — Metadata,Information géographique — Métadonnées,2003-05-08,1,['35.240.70'],ISO/TC 211,9599,,[53798],['en'],140,"<p>ISO 19115:2003 defines the schema required for describing geographic information and services. It provides information about the identification, the extent, the quality, the spatial and temporal schema, spatial reference, and distribution of digital geographic data.</p><p>ISO 19115:2003 is applicable to:</p><ul><li>the cataloguing of datasets, clearinghouse activities, and the full description of datasets;</li><li>geographic datasets, dataset series, and individual geographic features and feature properties.</li></ul><p>ISO 19115

44361,IS,Cor,ISO 19115:2003/Cor 1:2006,Geographic information — Metadata — Technical Corrigendum 1,Information géographique — Métadonnées — Rectificatif technique 1,2006-07-05,1,['35.240.70'],ISO/TC 211,9599,,[53798],['en'],33,

37805,IS,,ISO 19116:2004,Geographic information — Positioning services,Information géographique — Services de positionnement,2004-06-24,1,['35.240.70'],ISO/TC 211,9599,,[70882],['en'],51,"<p>ISO 19116:2004 specifies the data structure and content of an interface that permits communication between position-providing device(s) and position-using device(s) so that the position-using device(s) can obtain and unambiguously interpret position information and determine whether the results meet the requirements of the use. A standardized interface of geographic information with position allows the integration of positional information from a variety of positioning technologies into a variety of geog

70882,IS,,ISO 19116:2019,Geographic information — Positioning services,Information géographique — Services de positionnement,2019-12-02,2,['35.240.70'],ISO/TC 211,9599,[37805],[87480],"['en','fr']",63,"<p>This document specifies the data structure and content of an interface that permits communication between position-providing device(s) and position-using device(s) enabling the position-using device(s) to obtain and unambiguously interpret position information and determine, based on a measure of the degree of reliability, whether the resulting position information meets the requirements of the intended use.</p><p>A standardized interface for positioning allows the integration of reliable p

81672,IS,Amd,ISO 19116:2019/Amd 1:2021,Geographic information — Positioning services — Amendment 1,Information géographique — Services de positionnement — Amendement 1,2021-06-08,2,['35.240.70'],ISO/TC 211,9599,,[87480],"['en','fr']",2,

40395,IS,,ISO 19117:2005,Geographic information — Portrayal,Information géographique — Présentation,2005-06-15,1,['35.240.70'],ISO/TC 211,9599,,[46226],['en'],39,"<p>ISO 19117:2005 defines a schema describing the portrayal of geographic information in a form understandable by humans. It includes the methodology for describing symbols and mapping of the schema to an application schema. It does not include standardization of cartographic symbols, and their geometric and functional description.</p>"

37796,IS,,ISO 19118:2005,Geographic information — Encoding,Information géographique — Codage,2005-08-15,1,['35.240.70'],ISO/TC 211,9599,,[44212],['en'],104,"<p>ISO 19118:2005 specifies the requirements for defining encoding rules to be used for interchange of geographic data within the ISO 19100 series of International Standards.</p><p>ISO 19118:2005 specifies</p><ul><li>requirements for creating encoding rules based on UML schemas,</li><li>requirements for creating encoding services,</li><li>an informative XML based encoding rule for neutral interchange of geographic data.</li></ul><p>ISO 19118:2005 does not specify any digital media, it does not define any transfer services or transfer pro

39890,IS,,ISO 19119:2005,Geographic information — Services,Information géographique — Services,2005-02-10,1,['35.240.70'],ISO/TC 211,9599,,[59221],"['en','fr']",67,"<p>ISO 19119:2005 identifies and defines the architecture patterns for service interfaces used for geographic information, defines its relationship to the Open Systems Environment model, presents a geographic services taxonomy and a list of example geographic services placed in the services taxonomy. It also prescribes how to create a platform-neutral service specification, how to derive conformant platform-specific service specifications, and provides guidelines for the selection and specification of geographic services from bot

44268,IS,Amd,ISO 19119:2005/Amd 1:2008,Geographic information — Services — Amendment 1: Extensions of the service metadata model,Information géographique — Services — Amendement 1: Extensions du modèle de métadonnées du service,2008-04-16,1,['35.240.70'],ISO/TC 211,9599,,[59221],['en'],4,

40121,IS,,ISO 19123:2005,Geographic information — Schema for coverage geometry and functions,Information géographique — Schéma de la géométrie et des fonctions de couverture,2005-08-31,1,['35.240.70'],ISO/TC 211,9599,,"[70743,54717]","['en','fr']",65,"<p>ISO 19123:2005 defines a conceptual schema for the spatial characteristics of coverages. Coverages support mapping from a spatial, temporal or spatiotemporal domain to feature attribute values where feature attribute types are common to all geographic positions within the domain. A coverage domain consists of a collection of direct positions in a coordinate space that may be defined in terms of up to three spatial dimensions as well as a tem

40115,IS,,ISO 19125-2:2004,Geographic information — Simple feature access — Part 2: SQL option,Information géographique — Accès aux entités simples — Partie 2: Option SQL,2004-08-09,1,['35.240.70'],ISO/TC 211,9599,,[51208],['en'],61,"<p>This part of ISO 19125:2004 specifies an SQL schema that supports storage, retrieval, query and update of simple geospatial feature collections via the SQL Call Level Interface (SQL/CLI) and establishes an architecture for the implementation of feature tables.</p><p>This part of ISO 19125:2004 defines terms to use within the architecture. of geographic information and defines a simple feature profile of ISO 19107. In addition, this part of ISO 19125:2004 desc

44875,IS,,ISO 19126:2009,Geographic information — Feature concept dictionaries and registers,Information géographique — Dictionnaires de concepts de caractéristiques et registres,2009-10-21,1,['35.240.70'],ISO/TC 211,9599,,"[78898,69326]","['en','fr']",40,"<p>ISO 19126:2009 specifies a schema for feature concept dictionaries to be established and managed as registers. It does not specify schemas for feature catalogues or for the management of feature catalogues as registers. However, because feature catalogue are often derived from feature concept dictionaries, ISO 19126:2009 does specify a schema for a hierarchical register of feature concept dictionaries and feature catalogues. These regis

36760,IS,,ISO 19131:2007,Geographic information — Data product specifications,Information géographique — Spécifications de contenu informationnel,2007-04-16,1,['35.240.70'],ISO/TC 211,9599,,"[85092,71297]","['en','fr']",40,"<p>ISO 19131:2007 specifies requirements for the specification of geographic data products, based upon the concepts of other ISO 19100 International Standards. It also provides help in the creation of data product specifications, so that they are easily understood and fit for their intended purpose.</p>"

51790,IS,Amd,ISO 19131:2007/Amd 1:2011,Geographic information — Data product specifications — Amendment 1: Requirements relating to the inclusion of an application schema and feature catalogue and the treatment of coverages in an application schema.,Information géographique — Spécifications de contenu informationnel — Amendement 1: Exigences relatives à l'inclusion d'un schéma d'application et d'un catalogue d'objets géographiques et au traitement des couvertures dans un schéma d'application,2011-09-26,1,['35.240.70'],ISO/TC 211,9599,,"[85092,71297]","['en','fr']",3,

54721,IS,,ISO 19135-1:2015,Geographic information — Procedures for item registration — Part 1: Fundamentals,Information géographique — Procédures pour l'enregistrement d'éléments — Partie 1: Principes de base,2015-09-30,1,['35.240.70'],ISO/TC 211,9599,[32553],"[83471,87753,87030]","['en','fr']",62,"<p>ISO 19135-1:2015 specifies procedures to be followed in establishing, maintaining, and publishing registers of unique, unambiguous, and permanent identifiers and meanings that are assigned to items of geographic information. In order to accomplish this purpose, ISO 19135-1:2015 specifies elements that are necessary to manage the registration of these items.</p>"

78896,IS,Amd,ISO 19135-1:2015/Amd 1:2021,Geographic information — Procedures for item registration — Part 1: Fundamentals — Amendment 1,Information géographique — Procédures pour l'enregistrement d'éléments — Partie 1: Principes de base — Amendement 1,2021-02-19,1,['35.240.70'],ISO/TC 211,9599,,"[83471,87753,87030]","['en','fr']",4,

32553,IS,,ISO 19135:2005,Geographic information — Procedures for item registration,Information géographique — Procédures pour l'enregistrement d'éléments,2005-10-14,1,['35.240.70'],ISO/TC 211,9599,,[54721],"['en','fr']",57,"<p>ISO 19135:2005 specifies procedures to be followed in establishing, maintaining and publishing registers of unique, unambiguous and permanent identifiers, and meanings that are assigned to items of geographic information. In order to accomplish this purpose, ISO 19135:2005 specifies elements of information that are necessary to provide identification and meaning to the registered items and to manage the registration of these items.</p>"

32554,IS,,ISO 19136:2007,Geographic information — Geography Markup Language (GML),Information géographique — Langage de balisage en géographie (GML),2007-08-23,1,['35.240.70'],ISO/TC 211,9599,,"[75676,61584]","['en','fr']",394,"<p>The Geography Markup Language (GML) is an XML encoding in compliance with ISO 19118 for the transport and storage of geographic information modelled in accordance with the conceptual modelling framework used in the ISO 19100 series of International Standards and including both the spatial and non-spatial properties of geographic features.</p><p>ISO 19136:2007 defines the XML Schema syntax, mechanisms and conventions that:</p><ul><li>provide an open, vendor-neutral

44342,IS,,ISO 19144-2:2012,Geographic information - Classification systems — Part 2: Land Cover Meta Language (LCML),Information géographique — Systèmes de classification — Partie 2: Métalangage de couverture du sol (LCML),2012-07-03,1,['35.240.70'],ISO/TC 211,9599,,[81259],['en'],107,"<p>ISO 19144-2:2012 specifies a Land Cover Meta Language (LCML) expressed as a UML metamodel that allows different land cover classification systems to be described based on the physiognomic aspects. ISO 19144-2:2012 also specifies the detailed structure of a register for the extension of LCML but does not specify the maintenance of the register. ISO 19144-2:2012 recognizes that there exist a number of land co

44873,IS,,ISO 19146:2010,Geographic information — Cross-domain vocabularies,Information géographique — Vocabulaires interdomaines,2010-10-25,1,['35.240.70'],ISO/TC 211,9599,,[72217],"['en','fr']",31,<p>ISO 19146:2010 defines a methodology for cross-mapping technical vocabularies that have been adopted by industry-specific geospatial communities. It also specifies an implementation of ISO 19135 for the registration of geographic information concepts for the purpose of integrating multiple domain-based vocabularies.</p>

32566,IS,,ISO 19148:2012,Geographic information — Linear referencing,Information géographique — Référencement linéaire,2012-02-20,1,['35.240.70'],ISO/TC 211,9599,,[75150],"['en','fr']",86,"<p>ISO 19148:2012 specifies a conceptual schema for locations relative to a one-dimensional object as measurement along (and optionally offset from) that object. It defines a description of the data and operations required to use and support linear referencing.</p><p>ISO 19148:2012 is applicable to transportation, utilities, location-based services and other applications which define locations relative to linear objects.</p>"

51206,IS,,ISO 19152:2012,Geographic information — Land Administration Domain Model (LADM),Information géographique — Modèle du domaine de l'administration des terres (LADM),2012-11-19,1,['35.240.70'],ISO/TC 211,9599,,"[76060,81264,81268,81265,81262,81266,81263,81267]","['en','fr']",118,"<p>ISO 19152:2012:</p><ul><li> defines a reference Land Administration Domain Model (LADM) covering basic information-related components of land administration (including those over water and land, and elements above and below the surface of the earth);</li><li> provides an abstract, conceptual model with four packages related to parties (people and organizations); basic administrative units, righ

32574,IS,,ISO 19156:2011,Geographic information — Observations and measurements,Information géographique — Observations et mesures,2011-12-15,1,['35.240.70'],ISO/TC 211,9599,,"[82463,75680]","['en','fr']",46,"<p>ISO 19156:2011 defines a conceptual schema for observations, and for features involved in sampling when making observations. These provide models for the exchange of information describing observation acts and their results, both within and between different scientific and technical communities.</p><p>Observations commonly involve sampling of an ultimate feature-of-interest. ISO 19156:2011 defines a common set of sampling feature types classified primarily by topological dimension, a

64242,IS,,ISO 19160-4:2017,Addressing — Part 4: International postal address components and template language,Adressage — Partie 4: Composants et langages des modèles d'adresses postales internationales,2017-11-06,1,['35.240.70'],ISO/TC 211,9599,,[83470],"['en','fr']",61,"<p>ISO 19160-4:2017 defines key terms for postal addressing, postal address components and constraints on their use.</p><p>Specifically, ISO 19160-4:2017 defines postal address components organized into three hierarchical levels:</p><p>- elements, such as organization name or postcode, which have well-defined conceptual meaning and are not themselves made up of subordinate components, though they may be sub-divided for

63094,IS,,ISO 19162:2015,Geographic information — Well-known text representation of coordinate reference systems,Information géographique — Représentation textuelle bien lisible de systèmes de référence par coordonnées,2015-08-14,1,['35.240.70'],ISO/TC 211,9599,,[76496],['en'],85,"<p>ISO 19162:2015 defines the structure and content of a text string implementation of the abstract model for coordinate reference systems described in ISO 19111:2007 and ISO 19111-2:2009. The string defines frequently needed types of coordinate reference systems and coordinate operations in a self-contained form that is easily readable by machines and by humans. The essence is its simplicity; as a consequence ther

32586,IS,,ISO 19168-1:2020,Geographic information — Geospatial API for features — Part 1: Core,Information géographique — API géospatiale pour les entités — Partie 1: Profil minimal,2020-09-14,1,['35.240.70'],ISO/TC 211,9599,,[86508],"['en','fr']",54,"<p>This document specifies the behaviour of Web APIs that provide access to features in a dataset in a manner independent of the underlying data store. This document defines discovery and query operations.</p><p>Discovery operations enable clients to interrogate the API, including the API definition and metadata about the feature collections provided by the API, to determine the capabilities of the API and retrieve information about available d

6609,IS,,ISO 1919:1982,"Road vehicles — Spark plugs M 14 x 1,25 with flat seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M 14 x 1,25 à siège plat et leur logement dans la culasse",1982-11-01,3,['43.060.50'],ISO/TC 22,9599,,[6610],"['en','fr']",4,

6610,IS,,ISO 1919:1988,"Road vehicles — M14 x 1,25 spark-plugs with flat seating and their cylinder head housings","Véhicules routiers — Bougies d'allumage M14 x 1,25 à siège plat et leur logement dans la culasse",1988-10-13,4,['43.060.50'],ISO/TC 22,9599,[6609],[24581],"['en','fr']",4,

6611,IS,,ISO 1920:1976,"Concrete tests — Dimensions, tolerances and applicability of test specimens","Essais des bétons — Dimensions, tolérances et destination des éprouvettes",1976-04-01,1,['91.100.30'],ISO/TC 71,9599,,"[29099,40554]","['en','fr']",2,"<p>Specifies the nominal dimensions and tolerances of shape of concrete test specimens in the form of cubes, rectangular cylinders and rectangular prisms with a square cross-section, as well as their respective applicability.</p>"

29098,IS,,ISO 1920-2:2005,Testing of concrete — Part 2: Properties of fresh concrete,Essais du béton — Partie 2: Caractéristiques du béton frais,2005-04-15,1,['91.100.30'],ISO/TC 71/SC 1,9599,"[9852,9853,9854,12559,10831]",[54371],['en'],56,"<p>ISO 1920-2:2005 specifies procedures for testing fresh concrete. It specifies the following test methods: determination of consistence (slump test, Vebe test, degree of compactability, flow table test and for high fluidity concrete, the slump-flow test), determination of fresh density and determination of air content by the pressure gauge method and by the water column method.</p>"

40554,IS,,ISO 1920-3:2004,Testing of concrete — Part 3: Making and curing test specimens,Essais du béton — Partie 3: Confection et prise des éprouvettes,2004-10-01,1,['91.100.30'],ISO/TC 71/SC 1,9599,"[6611,7712]","[72259,54391]",['en'],20,<p>ISO 1920-3:2004 specifies the shape and dimensions of concrete test specimens for strength tests and the methods of making and curing these test specimens.</p>

40764,IS,,ISO 1920-4:2005,Testing of concrete — Part 4: Strength of hardened concrete,Essais du béton — Partie 4: Résistance du béton durci,2005-08-03,1,['91.100.30'],ISO/TC 71/SC 1,9599,"[9851,9691,9692]","[72260,54392]",['en'],27,<p>ISO 1920-4:2005 specifies procedures for testing the strength of hardened concrete.</p>

40734,IS,,ISO 1920-5:2004,Testing of concrete — Part 5: Properties of hardened concrete other than strength,Essais du béton — Partie 5: Caractéristiques du béton durci autres que la résistance,2004-10-14,1,['91.100.30'],ISO/TC 71/SC 1,9599,"[13591,12558]",[71703],['en'],13,<p>ISO 1920-5:2004 specifies procedures for testing properties of hardened concrete other than strength.</p>

40552,IS,,ISO 1920-6:2004,"Testing of concrete — Part 6: Sampling, preparing and testing of concrete cores","Essais du béton — Partie 6: Échantillonnage, préparation et essais sur des carottes de béton",2004-10-01,1,['91.100.30'],ISO/TC 71/SC 1,9599,[13594],"[72261,54393]",['en'],7,"<p>ISO 1920-6:2004 specifies a method for taking cores from hardened concrete, their examination, preparation for testing and determination of compressive strength.</p><p>ISO 1920-6:2004 does not give guidance on the decision to drill cores or on the locations for drilling nor does it provide procedures for interpreting the core strength results.</p>"

64022,IS,,ISO 19214:2017,Microbeam analysis — Analytical electron microscopy — Method of determination for apparent growth direction of wirelike crystals by transmission electron microscopy,Analyse par microfaisceaux — Microscopie électronique analytique — Méthode de détermination de la direction apparente de croissance des cristaux filiformes par microscopie électronique en transmission,2017-04-25,1,['71.040.50'],ISO/TC 202/SC 3,9599,,[86203],['en'],15,"<p>ISO 19214:2017 prescribes a method for the determination of apparent growth direction by transmission electron microscopy. It is applicable to all kinds of wirelike crystalline materials fabricated by various methods. This document can al

6612,IS,,ISO 1922:1981,Cellular plastics — Determination of shear strength of rigid materials,Plastiques alvéolaires — Détermination de la résistance au cisaillement des matériaux rigides,1981-11-01,2,['83.100'],ISO/TC 61/SC 10,9599,,[30407],"['en','fr']",4,<p>The method is based on the application of a shear stress to a test specimen of defined shape by means of metal supports bonded to the specimen. The adhesive used to fix the metal supports to the test specimen shall be such that shear strength and modulus of the adhesive film are significantly greater than that of the cellular material under test.</p>

30407,IS,,ISO 1922:2001,Rigid cellular plastics — Determination of shear strength,Plastiques alvéolaires rigides — Détermination de la résistance au cisaillement,2001-07-05,3,['83.100'],ISO/TC 61/SC 10,9599,[6612],"[45086,60770,34848]",['en'],6,

60770,IS,,ISO 1922:2012,Rigid cellular plastics — Determination of shear strength,Plastiques alvéolaires rigides — Détermination de la résistance au cisaillement,2012-07-31,4,['83.100'],ISO/TC 61/SC 10,9599,[30407],[65039],['en'],5,<p>ISO 1922:2012 specifies a method of determining the shear strength of rigid cellular plastics. It also provides for the optional determination of shear modulus.</p>

33758,IS,,ISO 19220:2004,Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Styrene copolymer blends (SAN + PVC),Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur des bâtiments — Mélanges de copolymères de styrène (SAN + PVC),2004-09-13,1,"['91.140.80','23.040.20']",ISO/TC 138/SC 1,9599,,[80947],"['en','fr']",32,"<p>ISO 19220:2004 specifies the requirements for solid-wall styrene copolymer blend (SAN + PVC) pipes and fittings for soil and waste discharge (low and high temperature) above ground inside buildings, as well as the system itself. It does not inclu

64057,IS,,ISO 19229:2015,Gas analysis — Purity analysis and the treatment of purity data,Analyse des gaz — Analyse de pureté et traitement des données de pureté,2015-02-11,1,['71.040.40'],ISO/TC 158,9599,,[72010],"['en','fr']",9,<p>ISO 19229:2015 sets requirements for the purity analysis of materials used in the preparation of calibration gas mixtures and the use of these data in calculating the composition of the mixture thus prepared.</p>

39000,IS,,ISO 19232-1:2004,Non-destructive testing — Image quality of radiographs — Part 1: Image quality indicators (wire type) — Determination of image quality value,Essais non destructifs — Qualité d'image des radiogrammes — Partie 1: Indicateurs de qualité d'image (à fils) — Détermination de l'indice de qualité d'image,2004-07-01,1,['19.100'],ISO/TC 135/SC 5,9599,[5499],[57710],"['en','fr']",5,<p>ISO 19232-1:2004 specifies a device and a method for the determination of the image quality of radiographs using wire type image quality indicators.</p>

46454,IS,Cor,ISO 19232-1:2004/Cor 1:2007,Non-destructive testing — Image quality of radiographs — Part 1: Image quality indicators (wire type) — Determination of image quality value — Technical Corrigendum 1,Essais non destructifs — Qualité d'image des radiogrammes — Partie 1: Indicateurs de qualité d'image (à fils) — Détermination de l'indice de qualité d'image — Rectificatif technique 1,2007-07-09,1,['19.100'],ISO/TC 135/SC 5,9599,,[57710],"['en','fr']",1,

39001,IS,,ISO 19232-2:2004,Non-destructive testing — Image quality of radiographs — Part 2: Image quality indicators (step/hole type) — Determination of image quality value,Essais non destructifs — Qualité d'image des radiogrammes — Partie 2: Indicateurs de qualité d'image (à trous et à gradins) — Détermination de l'indice de qualité d'image,2004-07-01,1,['19.100'],ISO/TC 135/SC 5,9599,[5499],[57711],"['en','fr']",5,<p>ISO 19232-2:2004 specifies a device and a method for the determination of the image quality of radiographs using step/hole type image quality indicators.</p>

46455,IS,Cor,ISO 19232-2:2004/Cor 1:2007,Non-destructive testing — Image quality of radiographs — Part 2: Image quality indicators (step/hole type) — Determination of image quality value — Technical Corrigendum 1,Essais non destructifs — Qualité d'image des radiogrammes — Partie 2: Indicateurs de qualité d'image (à trous et à gradins) — Détermination de l'indice de qualité d'image — Rectificatif technique 1,2007-07-09,1,['19.100'],ISO/TC 135/SC 5,9599,,[57711],"['en','fr']",1,

39002,IS,,ISO 19232-3:2004,Non-destructive testing — Image quality of radiographs — Part 3: Image quality classes for ferrous metals,Essais non destructifs — Qualité d'image des radiogrammes — Partie 3: Classes de qualité d'image pour des métaux ferreux,2004-07-01,1,['19.100'],ISO/TC 135/SC 5,9599,,[57712],"['en','fr']",9,<p>ISO 19232-3:2004 specifies the minimum image quality values to ensure a uniform radiographic quality. It applies to the two types of image quality indicator as detailed in ISO 19232-1 for wire type image quality indicators and ISO 19232-2 for step/hole type image quality indicators as well as for the two techniques described in ISO 5579. Values are specified for both the

57712,IS,,ISO 19232-3:2013,Non-destructive testing — Image quality of radiographs — Part 3: Image quality classes,Essais non destructifs — Qualité d'image des radiogrammes — Partie 3: Classes de qualité d'image,2013-06-13,2,['19.100'],ISO/TC 135/SC 5,9599,[39002],[87458],"['en','fr']",9,<p>ISO 19232-3:2013 specifies the minimum image quality values to ensure a uniform radiographic quality. It applies to the two types of image quality indicator as detailed in ISO 19232-1 for wire-type IQI and ISO 19232-2 for step/hole-type IQI and for the two techniques described in ISO 5579. Values are specified for the two classes of radiographic technique specified in ISO 5579.</p>

39003,IS,,ISO 19232-4:2004,Non-destructive testing — Image quality of radiographs — Part 4: Experimental evaluation of image quality values and image quality tables,Essais non destructifs — Qualité d'image des radiogrammes — Partie 4: Évaluation expérimentale des indices de qualité d'image et des tables de qualité d'image,2004-07-01,1,['19.100'],ISO/TC 135/SC 5,9599,,[57713],"['en','fr']",3,<p>ISO 19232-4:2004 gives instructions for the determination of image quality values and image quality tables used in radiographic testing.</p>

39004,IS,,ISO 19232-5:2004,Non-destructive testing — Image quality of radiographs — Part 5: Image quality indicators (duplex wire type) — Determination of image unsharpness value,Essais non destructifs — Qualité d'image des radiogrammes — Partie 5: Indicateurs de qualité d'image (duplex à fils) — Détermination de l'indice de flou de l'image,2004-07-01,1,['19.100'],ISO/TC 135/SC 5,9599,,[57714],"['en','fr']",3,<p>ISO 19232-5:2004 specifies a method of determining the image unsharpness of radiographs and realtime radioscopic systems.</p>

57714,IS,,ISO 19232-5:2013,Non-destructive testing — Image quality of radiographs — Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators,Essais non destructifs — Qualité d'image des radiogrammes — Partie 5: Détermination de l'indice de flou de l'image à l'aide d'indicateurs de qualité d'image duplex à fils,2013-06-13,2,['19.100'],ISO/TC 135/SC 5,9599,[39004],[71853],"['en','fr']",3,<p>ISO 19232-5:2013 specifies a method of determining the total image unsharpness of radiographs and real-time radioscopic systems.</p>

33759,IS,,ISO 19238:2004,Radiation protection — Performance criteria for service laboratories performing biological dosimetry by cytogenetics,Radioprotection — Critères de performance pour les laboratoires de service pratiquant la dosimétrie biologique par cytogénétique,2004-07-30,1,"['17.240','13.280']",ISO/TC 85/SC 2,9599,,[52157],"['en','fr']",21,"<p>ISO 19238:2004 provides criteria for quality assurance and quality control, evaluation of the performance and the accreditation of biological dosimetry by cytogenetic service laboratories.</p>"

52157,IS,,ISO 19238:2014,Radiological protection — Performance criteria for service laboratories performing biological dosimetry by cytogenetics,Radioprotection — Critères de performance pour les laboratoires de service pratiquant la dosimétrie biologique par cytogénétique,2014-01-27,2,"['17.240','13.280']",ISO/TC 85/SC 2,9599,[33759],[82295],"['en','fr']",29,"<p>ISO 19238:2014 provides criteria for quality assurance and quality control, evaluation of the performance, and the accreditation of biological dosimetry by cytogenetic service laboratories.</p><p>ISO 19238:2014 addresses</p><p>a) the confidentiality of personal information, for the customer and the service laboratory,</p><p>b)

6615,IS,,ISO 1924-1:1983,Paper and board — Determination of tensile properties — Part 1: Constant rate of loading method,,1983-11-01,1,['85.060'],ISO/TC 6/SC 2,9599,[6614],[6616],"['en','fr']",4,

6614,IS,,ISO 1924:1976,Paper and board — Determination of tensile strength,Papiers et cartons — Détermination de la résistance à la traction,1976-06-01,2,['85.060'],ISO/TC 6,9599,,"[6615,6617]",['en'],3,

6617,IS,,ISO 1924-2:1985,Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method,Papier et carton — Détermination des propriétés de traction — Partie 2: Méthode à gradient d'allongement constant,1985-08-08,1,['85.060'],ISO/TC 6/SC 2,9599,[6614],[6618],"['en','fr']",6,

6618,IS,,ISO 1924-2:1994,Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method,Papier et carton — Détermination des propriétés de traction — Partie 2: Méthode à gradient d'allongement constant,1994-12-08,2,['85.060'],ISO/TC 6/SC 2,9599,[6617],[41397],"['en','fr']",8,"<p>Cancels and replaces the first edition (1985). Specifies a method of measuring the tensile strength, stretch at break and tensile energy absorption of paper and board using a test instrument operating at a constant rate of elongation. Also specifies methods for calculating the tensile index, the tensile energy absorption index and the modulus of elasticity. Applies to all papers an

64126,IS,,ISO 19242:2015,Rubber — Determination of total sulfur content by ion chromatography,Caoutchouc — Détermination de la teneur en soufre total par chromatographie ionique,2015-06-04,1,['83.060'],ISO/TC 45/SC 2,9599,,[82451],['en'],14,"<p>ISO 19242:2015 specifies a method for the determination of the total sulfur content of raw rubber and unvulcanized or vulcanized rubber compounds by ion chromatography following the preparation of a sample solution using either a tubular furnace combustion or an oxygen combustion flask method.</p><p>The tubular furnace combustion method is applicable for rubbers with sulfur content less than 0,1 % as it is possible that the oxygen combustion flask met

6619,IS,,ISO 1925:1981,Balancing — Vocabulary,Équilibrage — Vocabulaire,1981-07-01,2,"['21.120.40','01.040.21']",ISO/TC 108,9599,,[6620],"['en','fr']",10,

6620,IS,,ISO 1925:1990,Mechanical vibration — Balancing — Vocabulary,Vibrations mécaniques — Équilibrage — Vocabulaire,1990-05-24,3,"['21.120.40','01.040.21']",ISO/TC 108,9599,[6619],"[34107,30481]","['en','fr']",33,

6621,IS,Amd,ISO 1925:1990/Amd 1:1995,Mechanical vibration — Balancing — Vocabulary — Amendment 1,Vibrations mécaniques — Équilibrage — Vocabulaire — Amendement 1,1995-11-16,3,"['21.120.40','01.040.21']",ISO/TC 108,9599,,"[34107,30481]","['en','fr']",7,