Withdrawn and superseded ISO standards — page 68 of 246

38870,IS,,ISO 18777:2005,Transportable liquid oxygen systems for medical use — Particular requirements,Systèmes transportables d'oxygène liquide à usage médical — Exigences particulières,2005-03-02,1,['11.040.99'],ISO/TC 121/SC 6,9599,,"[84981,84980]","['en','fr']",25,<p>ISO 18777:2005 specifies requirements for the safety and essential performance of transportable liquid oxygen systems which are used as a supply source for oxygen therapy. These devices usually consist of a portable unit to be carried by or with the patient whilst in use and the vessel used to refill the portable unit. These devices are mostly used in home care applications and in health care facilities/institutions. These d

38871,IS,,ISO 18778:2005,Respiratory equipment — Infant monitors — Particular requirements,Matériel respiratoire — Moniteurs pour enfants — Exigences particulières,2005-03-02,1,['11.040.10'],ISO/TC 121/SC 3,9599,,[79357],"['en','fr']",26,"<p>ISO 18778:2005 specifies requirements for the safety and essential performance of monitors used to detect apparent life-threatening events in sleeping or resting children under three years of age. This International Standard applies to devices used in home care applications. These monitors are generally used without continual professional supervision.</p><p>ISO 18778:2005 also applies to the accessories, e.g. probes and cables necessary to apply the moni

38872,IS,,ISO 18779:2005,Medical devices for conserving oxygen and oxygen mixtures — Particular requirements,Économiseurs médicaux d'oxygène et de mélanges oxygénés — Exigences particulières,2005-03-02,1,['11.040.10'],ISO/TC 121/SC 3,9599,,[46478],"['en','fr']",25,"<p>ISO 18779:2005 specifies requirements for the safety and essential performance of portable devices that supply the flow of oxygen or oxygen mixtures during therapy (e.g. long term oxygen therapy, analgesia).</p><p>These devices are intended to conserve oxygen or oxygen mixtures by delivering these gases intermittently on the patient's demand when used in home care applications. These devices are generally used without continual

63358,IS,,ISO 18782:2015,Textiles — Determination of dynamic hygroscopic heat generation,Textiles — Détermination de la production de chaleur dynamique hygroscopique,2015-09-14,1,['59.080.01'],ISO/TC 38,9599,,[82659],"['en','fr']",16,<p>ISO 18782:2015 specifies a test method for the determination of hygroscopic heat generated by flowing low then high humidity air on one side of a surface. It is applicable to all kinds of sheet-shaped textile materials.</p>

63404,IS,,ISO 18794:2018,Coffee — Sensory analysis — Vocabulary,Café — Analyse sensorielle — Vocabulaire,2018-01-03,1,"['67.140.20','01.040.67']",ISO/TC 34/SC 15,9599,,[87695],['en'],12,"<p>ISO 18794:2018 defines terms relating to coffee sensory analysis.</p><p>ISO 18794:2018 covers definitions applicable to green, roasted and ground coffee, coffee extracts and soluble coffee.</p><p>The terms are given under the following headings:</p><p>a) basic terms of sensory analysis;</p><p>b) generic terms in the sensory assessment of coffee;</p><p>c) terminology relating to coffee-specific odours and tastes;</p><p>d) terms commonly used in sensory assessment of coffee by practitioners.</p>

30428,IS,,ISO 188:1976,"Rubber, vulcanized — Accelerated ageing or heat-resistance tests",Caoutchouc vulcanisé — Essai de résistance au vieillissement accéléré ou à la chaleur,1976-10-15,1,['83.060'],ISO/TC 45,9599,,[4038],"['en','fr']",4,

4038,IS,,ISO 188:1982,"Rubber, vulcanized — Accelerated ageing or heat-resistance tests",Caoutchouc vulcanisé — Essais de résistance au vieillissement accéléré ou à la chaleur,1982-12-01,2,['83.060'],ISO/TC 45/SC 2,9599,[30428],[2122],"['en','fr']",4,

2122,IS,,ISO 188:1998,"Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests",Caoutchouc vulcanisé ou thermoplastique — Essais de résistance au vieillissement accéléré et à la chaleur,1998-04-09,3,['83.060'],ISO/TC 45/SC 2,9599,[4038],[41462],['en'],9,

38906,IS,Cor,ISO 188:1998/Cor 1:2003,"Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests — Technical Corrigendum 1",Caoutchouc vulcanisé ou thermoplastique — Essais de résistance au vieillissement accéléré et à la chaleur — Rectificatif technique 1,2003-09-01,3,['83.060'],ISO/TC 45/SC 2,9599,,[41462],['en'],1,

41462,IS,,ISO 188:2007,"Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests",Caoutchouc vulcanisé ou thermoplastique — Essais de résistance au vieillissement accéléré et à la chaleur,2007-06-19,4,['83.060'],ISO/TC 45/SC 2,9599,"[2122,38906]",[57738],"['en','fr']",17,<p>ISO 188:2007 specifies accelerated ageing or heat resistance tests on vulcanized or thermoplastic rubbers. Two methods are given:</p><p>Method A: air-oven method using a cell-type oven or cabinet oven with low air speed and a ventilation of 3 to 10 changes per hour;</p><p>Method B: air-oven method using a cabinet oven with forced air circulation by means of a fan and a ventilation of 3 to 10 chan

57738,IS,,ISO 188:2011,"Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests",Caoutchouc vulcanisé ou thermoplastique — Essais de résistance au vieillissement accéléré et à la chaleur,2011-09-26,5,['83.060'],ISO/TC 45/SC 2,9599,[41462],"[80468,68117]","['en','fr','ru']",20,<p>ISO 188:2011 specifies accelerated ageing or heat resistance tests on vulcanized or thermoplastic rubbers. Two methods are given:</p><p>Method A: air-oven method using a cell-type oven or cabinet oven with low air speed and a ventilation of 3 to 10 changes per hour;</p><p>Method B: air-oven method using a cabinet oven with forced air circulation by means of a fan and a ventilation of 3 to 1

6556,IS,,ISO 1880:1979,Instruments for the measurement of surface roughness by the profile method — Contact (stylus) instruments of progressive profile transformation — Profile recording instruments,Instruments de mesurage de la rugosité des surfaces par la méthode du profil — Instruments (à palpeur) avec contact à transformation progressive du profil — Enregistreurs de profil,1979-11-01,2,['17.040.30'],ISO/TC 213,9599,,[1916],"['en','fr']",4,

63454,IS,,ISO 18804:2017,"Rims for agricultural, forestry and construction machines","Jantes pour machines agricoles, engins forestiers et engins de construction",2017-10-11,1,['83.160.30'],ISO/TC 31/SC 5,9599,[39038],[77313],"['en','fr']",28,"<p>ISO 18804 specifies rim dimensions for rims for agricultural, forestry, and construction machines.</p><p>All dimensions in ISO 18804 are given in millimetres and are applicable to the side of rim which is in contact with the tyre during the mounting and in service.</p><p>NOTE Terms used are in accordance with ISO 3911.</p>"

63455,IS,,ISO 18805:2017,"Tyre classification — Agricultural, forestry and construction machines","Classification des pneumatiques — Machines agricoles, engins forestiers et engins de construction",2017-09-26,1,['83.160.30'],ISO/TC 31/SC 5,9599,,[89906],"['en','fr']",2,<p>ISO 18805:2017 specifies the classification codes for agricultural and forestry tractors and machines.</p>

6557,IS,,ISO 1881:1973,Withdrawal of ISO 1881-1973,Annulation de l'ISO 1881-1973,1973-11-01,1,['75.160.10'],ISO/TC 27,9599,,[4644],['en'],2,

38886,IS,,ISO 18813:2006,Ships and marine technology — Survival equipment for survival craft and rescue boats,Navires et technologie maritime — Équipement de survie pour embarcations de survie et bateaux de sauvetage,2006-03-29,1,['47.080'],ISO/TC 8/SC 1,9599,,[81753],"['en','ru']",22,"<p>ISO 18813:2006 specifies design, performance, and use of various items of survival equipment carried in survival craft and rescue boats complying with the International Convention for the Safety of Life at Sea (SOLAS), 1974 (as amended), and the International Maritime Organization Life-Saving Appliance Code (LSA Code). For many items, it also includes guidelines for maintenance and periodic inspections by A

63559,IS,,ISO 18846:2016,Solid biofuels — Determination of fines content in quantities of pellets,Biocombustibles solides — Détermination de la teneur en fines dans des quantités de granulés,2016-08-05,1,"['27.190','75.160.40']",ISO/TC 238,9599,,"[76096,81193]","['en','fr']",4,"<p>ISO 18846:2016 specifies a method for determining the amount of material passing through a sieve with 3,15 mm diameter round hole.</p>"

63560,IS,,ISO 18847:2016,Solid biofuels — Determination of particle density of pellets and briquettes,Biocombustibles solides — Détermination de la masse volumique unitaire des granulés et des briquettes,2016-08-31,1,"['27.190','75.160.40']",ISO/TC 238,9599,,[85893],"['en','fr']",12,<p>ISO 18847:2016 specifies the method for determining the particle density of compressed fuels such as pellets or briquettes. Particle density is not an absolute value and conditions for its determination have to be standardized to enable comparative determinations to be made.</p>

41842,IS,,ISO 18852:2005,Rubber compounding ingredients — Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA),Ingrédients de mélange du caoutchouc — Détermination de la surface par adsorption d'azote (NSA) et de la surface par épaisseur statistique (STSA) par méthode multipoints,2005-05-30,1,['83.040.20'],ISO/TC 45/SC 3,9599,,[60832],"['en','fr']",11,"<p>ISO 18852:2005 specifies a method for the determination of the nitrogen surface area (NSA) of carbon blacks and other rubber compounding ingredients, like silicas and zinc oxides, based on the Brunauer, Emmett and Teller (BET) theory of gas adsorption using a multipoint determination. This te

60832,IS,,ISO 18852:2012,Rubber compounding ingredients — Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA),Ingrédients de mélange du caoutchouc — Détermination de la surface par adsorption d'azote (NSA) et de la surface par épaisseur statistique (STSA) par méthode multipoints,2012-03-30,2,['83.040.20'],ISO/TC 45/SC 3,9599,"[41842,54521]",[66259],"['en','fr','ru']",11,

6558,IS,,ISO 1886:1980,Textile glass — Method of sampling applicable to batches,Verre textile — Méthode d'échantillonnage applicable à des lots,1980-11-01,2,['59.100.10'],ISO/TC 61/SC 13,9599,,[6559],"['en','fr']",3,

63615,IS,,ISO 18862:2016,Coffee and coffee products — Determination of acrylamide — Methods using HPLC-MS/MS and GC-MS after derivatization,Café et dérivés du café — Dosage de l'acrylamide — Méthodes par CLHP-SM/SM et CG-SM après dérivation,2016-07-11,1,['67.140.20'],ISO/TC 34/SC 15,9599,,"[89687,87696]","['en','fr']",19,"<p>ISO 18862:2016 specifies methods for the determination of acrylamide in coffee and coffee products by extraction with water, clean-up by solid-phase extraction and determination by HPLC-MS/MS and GC-MS. It was validated in a method validation study on roasted coffee, soluble coffee, coffee substitutes and coffee products with ranges from 53 μg/kg to 612,1 μg/kg.</p>" 636

6560,IS,,ISO 1887:1980,Textile glass — Determination of combustible matter content,Verre textile — Détermination de la teneur en matières combustibles,1980-05-01,2,['59.100.10'],ISO/TC 61/SC 13,9599,,[6561],"['en','fr']",3,

6561,IS,,ISO 1887:1995,Textile glass — Determination of combustible-matter content,Verre textile — Détermination de la teneur en matières combustibles,1995-05-18,3,['59.100.10'],ISO/TC 61/SC 13,9599,[6560],[59249],"['en','fr']",4,"<p>Cancels and replaces the second edition (1980). Specifies a method for the determination of the combustible-matter content of products made from textile glass, such as continuous-filament yarns, staple-fibre yarns, rovings, chopped strands, milled fibres, fabrics, chopped-strand and continuous-filament mats and other glass reinforcements.</p>"

40136,IS,,ISO 18878:2004,Mobile elevating work platforms — Operator (driver) training,Plates-formes élévatrices mobiles de personnes — Formation des opérateurs (conducteurs),2004-09-07,1,"['03.100.30','53.020.99']",ISO/TC 214,9599,,[59512],"['en','fr']",13,"<p>ISO 18878:2004 provides methods to prepare training materials and to administer training to operators (drivers) of Mobile Elevating Work Platforms (hereafter known as MEWPs).</p><p>It is applicable to MEWPs, as defined in ISO 16368, which are intended to move persons to positions where they can carry out work from the work platform.</p><p>If national regulations are more stringent, they take precedence over the requirements of ISO 1887

59512,IS,,ISO 18878:2013,Mobile elevating work platforms — Operator (driver) training,Plates-formes élévatrices mobiles de personnel — Formation des opérateurs (conducteurs),2013-07-31,2,"['03.100.30','53.020.99']",ISO/TC 214,9599,[40136],[86768],"['en','fr']",13,"<p>ISO 18878:2013 provides methods for preparing training materials and administering standardized training to operators (drivers) of mobile elevating work platforms (MEWPs). It is applicable to MEWPs, as defined in ISO 16368, intended to move persons, tools and materials to positions where they can carry out work from the work platform.</p>"

6562,IS,,ISO 1888:1979,Textile glass — Determination of the average diameter of staple fibres or continuous filaments constituting a textile glass yarn — Cross-section method,Verre textile — Détermination du diamètre moyen des fibres ou filaments constituant un fil de verre textile — Méthode de la section transversale,1979-11-01,1,['59.100.10'],ISO/TC 61/SC 13,9599,,[6563],"['en','fr']",3,

6563,IS,,ISO 1888:1996,Textile glass — Staple fibres or filaments — Determination of average diameter,Verre textile — Fibres discontinues et filaments — Détermination du diamètre moyen,1996-09-26,2,['59.100.10'],ISO/TC 61/SC 13,9599,[6562],[43619],"['en','fr']",5,

43619,IS,,ISO 1888:2006,Textile glass — Staple fibres or filaments — Determination of average diameter,Verre textile — Fibres discontinues et filaments — Détermination du diamètre moyen,2006-07-05,3,['59.100.10'],ISO/TC 61/SC 13,9599,[6563],[82196],"['en','fr']",5,<p>ISO 1888:2006 specifies longitudinal-profile and transverse-section methods for determining the average diameter (i.e. the average value of actual diameters) of staple fibres or filaments in a textile glass product.</p><p>This diameter must not be confused with the nominal diameter which is used in the designation of yarns and materials manufactured from these yarns and corresponds to the average diameter but rounded to the near

66938,IS,,ISO 18885-3:2019,TPMS snap-in valves — Part 3: Performances,Valves à boutonner («snap-in») pour TPMS — Partie 3: Performances,2019-10-01,1,['83.160.01'],ISO/TC 31/SC 9,9599,,[80938],"['en','fr']",11,<p>This document specifies test methods for TPMS snap-in tubeless valves.</p><p>These methods are defined to determine the minimum level of performances requested.</p>

6564,IS,,ISO 1889:1975,"Textile glass products — Continuous filament yarns, staple fibre yarns and rovings in the form of packages — Determination of linear density","Produits en verre textile — Fils de silionne, fils de verranne et stratifils présentés sous forme d'enroulements — Détermination de la masse linéique",1975-06-01,1,['59.100.10'],ISO/TC 61/SC 13,9599,,[6565],"['en','fr']",3,

6565,IS,,ISO 1889:1987,"Textile glass — Continuous filament yarns, staple fibre yarns, textured yarns and rovings (packages) — Determination of linear density","Verre textile — Fils de silionne, fils de verranne, fils texturés et stratifils (enroulements) — Détermination de la masse linéique",1987-03-12,2,['59.100.10'],ISO/TC 61/SC 13,9599,[6564],[23634],['en'],3,

23634,IS,,ISO 1889:1997,Reinforcement yarns — Determination of linear density,Fils de renfort — Détermination de la masse linéique,1997-05-15,3,['59.100.01'],ISO/TC 61/SC 13,9599,"[18107,6565]",[52990],"['en','fr']",6,

39746,IS,,ISO 18893:2004,"Mobile elevating work platforms — Safety principles, inspection, maintenance and operation","Plates-formes élévatrices mobiles de personnel — Principes de sécurité, inspection, entretien, mise en oeuvre et utilisation",2004-11-18,1,['53.020.99'],ISO/TC 214,9599,,[59976],"['en','fr']",17,"<p>ISO 18893:2004 applies to all Mobile Elevating Work Platforms (MEWPs) that are intended to position persons, tools and materials and which, as a minimum, consists of a work platform with controls, an extending structure and a chassis. The objectives of ISO 18893:2004 are the prevention of personal injuries, property damage and accidents and the establishment of criteria for inspe

59976,IS,,ISO 18893:2014,"Mobile elevating work platforms — Safety principles, inspection, maintenance and operation","Plates-formes élévatrices mobiles de personnel — Principes de sécurité, inspection, entretien, mise en oeuvre et utilisation",2014-04-14,2,['53.020.99'],ISO/TC 214,9599,[39746],[85161],['en'],24,"<p>ISO 18893:2014 applies to all mobile elevating work platforms (MEWPs) that are intended to position persons, tools and materials and which, as a minimum, consists of a work platform with controls, an extending structure and a chassis.</p><p>The technical safety requirements of this International Standard apply except where national or local regulations are more stringent.</p><p>F

32044,IS,,ISO 18894:2006,Coke — Determination of coke reactivity index (CRI) and coke strength after reaction (CSR),Coke — Mesures de l'indice de réactivité du coke (CRI) et de la résistance post-réactionelle du coke (CSR),2006-04-20,1,['75.160.10'],ISO/TC 27/SC 3,9599,,[72266],"['en','ru']",16,<p>ISO 18894:2006 specifies the equipment and techniques used for determining lump-coke (&gt; 20 mm) reactivity in carbon dioxide gas at elevated temperatures and its strength after reaction in carbon dioxide gas by tumbling in a cylindrical chamber.</p>

38919,IS,,ISO 18896:2006,Footwear — Test methods for shanks — Longitudinal stiffness,Chaussures — Méthodes d'essai pour cambrions — Rigidité longitudinale,2006-03-17,1,['61.060'],ISO/TC 216,9599,,[63248],"['en','fr']",4,<p>ISO 18896:2006 specifies a method for assessing the stiffness in the longitudinal direction of steel shanks used for the reinforcement of the waist region of women's shoes and of some men's and children's shoes.</p>

40117,IS,,ISO 18898:2006,Rubber — Calibration and verification of hardness testers,Caoutchouc — Étalonnage et vérification des duromètres,2006-10-03,1,['83.060'],ISO/TC 45/SC 2,9599,,[55609],"['en','fr']",18,"<p>ISO 18898:2006 specifies procedures for the calibration and verification of durometers of types A, D, AO and AM (as used in ISO 7619-1), IRHD pocket meters (as used in ISO 7619-2) and IRHD dead-load instruments (as used in ISO 48).</p>"

55609,IS,,ISO 18898:2012,Rubber — Calibration and verification of hardness testers,Caoutchouc — Étalonnage et vérification des duromètres,2012-06-27,2,['83.060'],ISO/TC 45/SC 2,9599,[40117],[65920],"['en','fr']",18,

65920,IS,,ISO 18898:2016,Rubber — Calibration and verification of hardness testers,Caoutchouc — Étalonnage et vérification des duromètres,2016-02-17,3,['83.060'],ISO/TC 45/SC 2,9599,[55609],[74974],"['en','fr']",21,"<p>ISO 18898:2016 specifies procedures for the calibration and verification of durometers of types A, D, AO and AM (see ISO 7619‑1), IRHD pocket meters (see ISO 7619‑2), IRHD dead-load instruments (see ISO 48) and dead-load instruments using the very low rubber hardness scale (see ISO 27588).</p>"

33720,IS,,ISO 18899:2004,Rubber — Guide to the calibration of test equipment,Caoutchouc — Guide pour l'étalonnage du matériel d'essai,2004-06-25,1,['83.060'],ISO/TC 45/SC 2,9599,,[63326],"['en','fr']",16,"<p>ISO 18899:2004 outlines the principles of calibration of rubber test equipment and gives guidance on the general requirements for ensuring measurement traceability, establishing calibration intervals and estimating measurement uncertainty.</p><p>Methods of calibration for a range of parameters applicable to rubber test equipment are briefly described with reference to relevant standards where appropriate.</p>"

6566,IS,,ISO 1890:1975,Textile glass products — Continuous filament yarns and staple fibre yarns — Determination of twist,Produits en verre textile — Fils de silionne et de verranne — Détermination de la torsion,1975-06-01,1,['59.100.10'],ISO/TC 61,9599,,[6567],"['en','fr']",3,

6567,IS,,ISO 1890:1986,Textile glass — Continuous filament yarns and staple fibre yarns — Determination of twist,Verre textile — Fils de silionne et de verranne — Détermination de la torsion,1986-06-05,2,['59.100.10'],ISO/TC 61/SC 13,9599,[6566],[21503],"['en','fr']",3,

21503,IS,,ISO 1890:1997,Reinforcement yarns — Determination of twist,Fils de renfort — Détermination de la torsion,1997-05-15,3,['59.100.01'],ISO/TC 61/SC 13,9599,[6567],[52989],"['en','fr']",5,

31925,IS,,ISO 18901:2002,Imaging materials — Processed silver-gelatin type black-and-white films — Specifications for stability,Matériaux pour l'image — Films noir et blanc de type gélatino-argentique traités — Spécifications relatives à la stabilité,2002-03-07,1,['37.040.20'],ISO/TC 42,9599,[23092],[51029],['en'],22,"<p>This International Standard establishes the specifications for photographic films intended for the storage of records.</p><p>It is applicable specifically to films with a base of safety cellulose ester or polyester having silver-gelatin emulsions, processed to produce a black-and-white silver image by negative or full-reversal processing. It applies to film processed by a mo

30862,IS,,ISO 18902:2001,"Imaging materials — Processed photographic films, plates and papers — Filing enclosures and storage containers","Matériaux pour image — Films, plaques et papiers après traitement — Contenants pour classement destinés à l'archivage",2001-08-30,1,['37.040.20'],ISO/TC 42,9599,"[18247,18248]",[45790],['en'],12,

45790,IS,,ISO 18902:2007,"Imaging materials — Processed imaging materials — Albums, framing and storage materials","Matériaux pour image — Matériaux pour image après traitement — Albums, cadrage et matériaux d'archivage",2007-12-06,2,['37.040.20'],ISO/TC 42,9599,[30862],[60377],['en'],15,"<p>ISO 18902:2007 specifies the principal physical and chemical requirements for filing enclosures, containers, albums and frames, particularly designed for storing wet or dry processed films, plates and papers. It covers requirements for paper and board, plastic, metal, adhesives (except spray adhesives), writing, labelling and printing materials. It is applicable to photographs made with hardcopy material

54031,IS,Cor,ISO 18902:2007/Cor 1:2009,"Imaging materials — Processed imaging materials — Albums, framing and storage materials — Technical Corrigendum 1","Matériaux pour image — Matériaux pour image après traitement — Albums, cadrage et matériaux d'archivage — Rectificatif technique 1",2009-04-03,2,['37.040.20'],ISO/TC 42,9599,,[60377],['en'],2,

31931,IS,,ISO 18907:2000,Imaging materials — Photographic films and papers — Wedge test for brittleness,Matériaux pour l'image — Films et papiers photographiques — Détermination de la méthode dite <<du coin>>,2000-05-11,1,['37.040.20'],ISO/TC 42,9599,[12278],[62628],['en'],9,

44126,IS,,ISO 18909:2006,Photography — Processed photographic colour films and paper prints — Methods for measuring image stability,Photographie — Films et papiers photographiques couleur traités — Méthodes de mesure de la stabilité de l'image,2006-07-17,1,['37.040.20'],ISO/TC 42,9599,[18947],[83333],['en'],50,"<p>ISO 18909:2006 describes test methods for determining the long-term dark storage stability of colour photographic images and the colour stability of such images when subjected to certain illuminants at specified temperatures and relative humidities.</p><p>ISO 18909:2006 is applicable to colour photographic images made with traditional, continuous-tone photographic materials with im

44952,IS,Cor,ISO 18909:2006/Cor 1:2006,Photography — Processed photographic colour films and paper prints — Methods for measuring image stability — Technical Corrigendum 1,Photographie — Films et papiers photographiques couleur traités — Méthodes de mesure de la stabilité de l'image — Rectificatif technique 1,2006-12-14,1,['37.040.20'],ISO/TC 42,9599,,[83333],['en'],2,

6568,IS,,ISO 1891:1979,"Bolts, screws, nuts and accessories — Terminology and nomenclature","Vis, écrous et accessoires — Terminologie et nomenclature",1979-12-01,1,['21.060.01'],ISO/TC 2/SC 7,9599,,"[38530,30096]","['en','fr','ru']",55,"<p>Gives terms in English, German, French, Italian, Spanish and Russian as well as figures related to: screw threads; shapes of heads; forms of shank; screw and bolt ends; driving features; miscellaneou bolt and scrws; screw plugs; studs; headless, set, tapping, wood, threated cutting and forming screws; hexagon,square, triangle, coctagon, pentagon, bihexagonal, and othernuts; washers as well as split pinss.</p>"

30876,IS,,ISO 18911:2000,Imaging materials — Processed safety photographic films — Storage practices,Matériaux pour image — Films photographiques de sécurité traités — Techniques d'archivage,2000-11-16,1,['37.040.20'],ISO/TC 42,9599,[23406],[46602],['en'],26,

31937,IS,,ISO 18913:2003,Imaging materials — Permanence — Vocabulary,Matériaux pour image — Permanence — Vocabulaire,2003-05-13,1,['01.040.37'],ISO/TC 42,9599,,[54702],['en'],17,<p>ISO 18913:2003 establishes a vocabulary of terms and definitions used in respect of the permanence of imaging materials and in standards related to permanence.</p><p> These terms and definitions are generic and are applicable to the entire imaging industry. </p>

54702,IS,,ISO 18913:2012,Imaging materials — Permanence — Vocabulary,Matériaux pour image — Permanence — Vocabulaire,2012-05-25,2,"['01.040.37','37.040.20']",ISO/TC 42,9599,[31937],[76578],['en'],22,"<p>ISO 18913:2012 establishes a vocabulary of terms and definitions used in relation to the permanence of imaging materials, related storage materials and digital storage media. </p>"

31938,IS,,ISO 18914:2002,Imaging materials — Photographic film and papers — Method for determining the resistance of photographic emulsions to wet abrasion,Matériaux pour image — Films et papiers photographiques — Méthode de détermination de la résistance des émulsions photographiques à l'abrasion dans des conditions humides,2002-11-13,1,['37.040.20'],ISO/TC 42,9599,,[62634],['en'],7,"<p>This International Standard specifies a laboratory test method for determining the resistance of photographic emulsions or gelatin backings to abrasion damage during processing.</p><p>This method may be used to determine the effects of variations in processing solutions, gelatin layer properties, processing

31940,IS,,ISO 18916:2007,Imaging materials — Processed imaging materials — Photographic activity test for enclosure materials,Matériaux pour l'image — Matériaux pour l'image traités — Essai d'activité photographique pour les matériaux de fermeture,2007-06-11,1,['37.040.99'],ISO/TC 42,9599,[24597],[84731],['en'],14,"<p>ISO 18916:2007 specifies the procedure for the photographic activity and dye coupler reactivity tests. </p><p>ISO 18916:2007 is applicable to general photographic enclosure materials such as paper, tissue, cardboard, mat board and plastics. It is also applicable to components of photographic enclosure materials such as adhesives, inks, paints, labels, and tape.</p><p>ISO 18916:

31116,IS,,ISO 18920:2000,Imaging materials — Processed photographic reflection prints — Storage practices,Matériaux pour image — Tirages photographiques traités par réflexion — Directives pour l'archivage,2000-07-20,1,['37.040.20'],ISO/TC 42,9599,[27322],[46186],['en'],18,

27620,IS,,ISO 18921:2002,Imaging materials — Compact discs (CD-ROM) — Method for estimating the life expectancy based on the effects of temperature and relative humidity,Matériaux pour l'image — Disques compacts (CD-ROM) — Méthode d'estimation de l'espérance de vie basée sur les effets de la température et de l'humidité relative,2002-05-16,1,"['35.220.30','37.040.99']",ISO/TC 42,9599,,[51327],['en'],21,

28495,IS,,ISO 18924:2000,Imaging materials — Test method for Arrhenius-type predictions,Matériaux d'image — Méthode d'essai pour les prédictions de type Arrhenius,2000-08-24,1,['37.040.20'],ISO/TC 42,9599,,[62630],['en'],14,

30864,IS,,ISO 18925:2002,Imaging materials - Optical disc media - Storage practices,Matériaux pour l'image — Milieu pour disque optique — Pratiques de stockage,2002-02-21,1,['37.040.99'],ISO/TC 42,9599,,[51328],['en'],13,

51328,IS,,ISO 18925:2008,Imaging materials — Optical disc media — Storage practices,Matériaux pour l'image — Milieux pour disque optique — Pratiques de stockage,2008-10-06,2,"['35.220.30','37.040.99']",ISO/TC 42,9599,[30864],[62632],['en'],11,"<p>ISO 18925:2008 establishes extended-term storage conditions for optical discs and provides recommendations concerning the storage conditions, storage facilities, enclosures and inspection for optical discs. It is applicable to discs made for audio, video, instrumentation and computer use.</p>"

44129,IS,,ISO 18926:2006,Imaging materials - Information stored on magneto-optical (MO) discs — Method for estimating the life expectancy based on the effects of temperature and relative humidity,Matériaux pour l'image — Information stockée sur disques opto-magnétiques (MO) — Méthode d'estimation de l'espérance de vie basée sur les effets de la température et de l'humidité relative,2006-07-13,1,"['35.220.30','37.040.99']",ISO/TC 42,9599,,[60380],['en'],23,<p>ISO 18926:2006 specifies a test method for<b> </b>estimating the life expectancy of information stored on rewritable and write-once magneto-optical media. Only the effects of temperature and relative humidity on the media are considered.

31952,IS,,ISO 18927:2002,Imaging materials — Recordable compact disc systems — Method for estimating the life expectancy based on the effects of temperature and relative humidity,Matériaux pour image — CD enregistrables — Méthode d'estimation de l'espérance de vie basée sur les effets de la température et de l'humidité relative,2002-10-25,1,"['37.040.99','37.080']",ISO/TC 42,9599,,[51329],['en'],27,"<p>This International Standard specifies a test method for estimating the life expectancy of information stored on recordable compact disc systems. Only the effects of temperature and relative humidity on the media are considered.</p><p>This International Standard does not cover the effects of l

51329,IS,,ISO 18927:2008,Imaging materials — Recordable compact disc systems — Method for estimating the life expectancy based on the effects of temperature and relative humidity,Matériaux pour image — Systèmes de CD enregistrables — Méthode d'estimation de l'espérance de vie basée sur les effets de la température et de l'humidité relative,2008-10-06,2,"['35.220.30','37.040.99']",ISO/TC 42,9599,[31952],[62635],['en'],27,"<p>ISO 18927:2008 specifies a test method for estimating the life expectancy of information stored on recordable compact disc systems. Only the effects of temperature and relative humidity on the media are considered. </p><p>ISO 18927:2008 does not cover the effects of light

28008,IS,,ISO 18928:2002,Imaging materials — Unprocessed photographic films and papers — Storage practices,Matériaux pour l'image — Films et papiers photographiques non traités — Pratiques de stockage,2002-01-24,2,"['37.040.20','37.040.30']",ISO/TC 42,9599,[18382],[62637],['en'],8,

62637,IS,,ISO 18928:2013,Imaging materials — Unprocessed photographic films and papers — Storage practices,Matériaux pour l'image — Films et papiers photographiques non traités — Pratiques de stockage,2013-02-07,3,"['37.040.20','37.040.30']",ISO/TC 42,9599,[28008],[91670],['en'],6,"<p>ISO 18928:2013 specifies recommended storage conditions for unprocessed photographic materials. </p><p>ISO 18928:2013 is applicable to black-and-white and colour photographic materials (negative films, positive films, reversal films, positive papers, and X-ray films), as well as to safety films.</p>"

31954,IS,,ISO 18929:2003,Imaging materials — Wet-processed silver-gelatin type black-and-white phototgraphic reflection prints — Specifications for dark storage,Matériaux pour l'image — Tirages photographiques par réflexion par traitement humide gélatinoargentique de type noir et blanc — Spécifications pour le stockage dans l'obscurité,2003-11-21,1,['37.040.20'],ISO/TC 42,9599,,[55696],['en'],25,"<p>ISO 18929:2003 establishes the specifications for silver-gelatine photographic reflection prints intended for dark storage and covers silver-gelatine print types of all weights.</p><p>ISO 18929:2003 applies to wet-processed black-and-white silver-gelatine photographic prints; including those that

6570,IS,,ISO 1893:1989,Refractory products — Determination of refractoriness-under-load (differential - with rising temperature),Produits réfractaires — Détermination de l'affaissement sous charge (différentiel - avec élévation de la température),1989-07-13,1,['81.080'],ISO/TC 33,9599,[6569],"[29488,38785]","['en','fr']",8,"<p>Specifies a method for determining the deformation of a refractory product subjected to a constant load under conditions of progressively rising temperature, or 'refractoriness under load' - differential method, with rising temperature. The test may be carried out up to maximum temperature of 1700 C.</p>"

38785,IS,,ISO 1893:2005,Refractory products — Determination of refractoriness-under-load — Differential method with rising temperature,Produits réfractaires — Détermination de l'affaissement sous charge — Méthode différentielle avec élévation de la température,2005-04-01,2,['81.080'],ISO/TC 33,9599,[6570],[44297],"['en','fr']",12,"<p>ISO 1893:2005 specifies a method for determining the deformation of dense and insulating shaped refractory products subjected to a constant load under conditions of progressively rising temperature (or refractoriness-under-load) by a differential method, with rising temperature. The test may be carried out up to a maximum temperature of 1 700 °C.</p>"

39546,IS,,ISO 18932:2005,Imaging materials — Adhesive mounting systems — Specifications,Matériaux pour l'image — Systèmes de montage adhésifs — Spécifications,2005-03-15,1,['37.040.99'],ISO/TC 42,9599,,[52437],['en'],10,"<p>ISO 18932:2005 provides specifications for adhesive mounting materials for use in attaching prints including photographic, electrophotographic, electrostatic, thermal transfer, or inkjet prints to mounting boards, album leaves, file cards and other supports. It covers both pressure-sensitive and thermally-activated adhesives. Spray adhesives are specifically excluded from ISO 18932:2005.</p>"

44128,IS,,ISO 18933:2006,Imaging materials — Magnetic tape — Care and handling practices for extended usage,Matériaux pour l'image — Bande magnétique — Précautions et pratiques de manutention pour usage prolongé,2006-07-13,1,"['35.220.22','37.040.99']",ISO/TC 42,9599,,[60960],['en'],29,"<p>ISO 18933:2006 concerns the care and handling of magnetic recording tape during use. It addresses the issues of physical integrity of the medium necessary to preserve access to the data (information) recorded on the tape. ISO 18933:2006 recommends handling procedures to maximize the effective life of magnetic tape.</p><p>While some of the recommendations in ISO 18933:2006, such as staff training, apply spe

31960,IS,,ISO 18934:2006,Imaging materials — Multiple media archives — Storage environment,Matériaux pour l'image — Archives multimédia — Environnement de stockage,2006-05-15,1,['37.040.99'],ISO/TC 42,9599,,[55518],['en'],11,"<p>ISO 18934:2006 provides suggested guidelines for four storage macroenvironments for archives that contain a variety of recording media, based on the corresponding ISO storage standards for those media. Whenever possible, it is advisable to follow the storage environments in the ISO storage standards. ISO 18934:2006 does not replace these ISO storage standards. In addition to environment recommendations, those standards also include other vital information pertinent f

38535,IS,,ISO 18935:2005,Imaging materials — Colour images on paper prints — Determination of indoor water resistance of printed colour images,Matériaux pour l'image — Images en couleurs sur impressions en papier — Détermination de la résistance interne de la couleur à l'eau,2005-08-23,1,['37.100.99'],ISO/TC 42,9599,,[67483],['en'],6,<p>ISO 18935:2005 specifies tests to determine the relative indoor water resistance of printed colour images. ISO 18935:2005 is applicable to both digital and analogue prints. </p>

50467,IS,Cor,ISO 18935:2005/Cor 1:2007,Imaging materials — Colour images on paper prints — Determination of indoor water resistance of printed colour images — Technical Corrigendum 1,Matériaux pour l'image — Images en couleurs sur impressions en papier — Détermination de la résistance interne de la couleur à l'eau — Rectificatif technique 1,2007-11-20,1,['37.100.99'],ISO/TC 42,9599,,[67483],['en'],1,

67483,IS,,ISO 18935:2016,Imaging materials — Colour images — Determination of water resistance of printed colour images,Matériaux pour l'image — Images en couleurs sur impressions en papier — Détermination de la résistance interne de la couleur à l'eau,2016-10-19,2,['37.100.99'],ISO/TC 42,9599,"[50467,38535]",[74325],['en'],8,<p>ISO 18935:2016 specifies tests to determine the relative water resistance of printed colour images. This document is applicable to both digital and analogue prints.</p>

74325,IS,,ISO 18935:2018,Imaging materials — Colour images — Determination of water resistance of printed colour images,Matériaux pour l'image — Images en couleurs sur impressions en papier — Détermination de la résistance interne de la couleur à l'eau,2018-08-31,3,['37.100.99'],ISO/TC 42,9599,[67483],[89708],['en'],8,<p>This document specifies tests to determine the relative water resistance of printed colour images. This document is applicable to both digital and analogue prints.</p>

31962,IS,,ISO 18936:2012,Imaging materials — Processed colour photographs — Methods for measuring thermal stability,Matériaux pour l'image — Photographies couleurs après traitement — Méthodes de mesure de la stabilité thermique,2012-04-13,1,['37.040.20'],ISO/TC 42,9599,,[78199],['en'],17,"<p>This International Standard describes test methods for determining the long-term dark storage stability of</p><p>colour photographic images.</p><p>It is applicable to colour photographic images made with traditional photographic materials. These images</p><p>are generated with chromogenic, silver dye-bleach, dye transfer, dye-diffusion-transfer 'instant' systems and</p><p>similar systems. The test method

57700,IS,,ISO 18937:2014,Imaging materials — Photographic reflection prints — Methods for measuring indoor light stability,Matéruaux pour l'image — Tirages photographiques par réflexion — Méthodes de mesure de la stabilité de la lumière en intérieur,2014-01-22,1,['37.040.20'],ISO/TC 42,9599,,[74075],['en'],51,"<p>ISO 18937:2014 describes test equipment and procedures for measuring the light stability of images of colour photographic reflection prints designed for display in, for example, houses, apartments, other dwelling places, offices and commercial display, when subjected to certain illuminants at specified temperatures and relative humidities. It also addresses colour photographic refle

74075,IS,,ISO 18937:2020,Imaging materials — Photographic reflection prints — Methods for measuring indoor light stability,Matériaux pour l'image — Tirages photographiques par réflexion — Méthodes de mesure de la stabilité de la lumière en intérieur,2020-01-06,2,['37.040.20'],ISO/TC 42,9599,[57700],"[81901,81902]",['en'],21,"<p>This document describes test equipment and procedures for measuring the light stability of colour photographic reflection prints designed for display, when subjected to a filtered xenon-arc light source simulating daylight through windows at specified temperatures and relative humidity.</p><p>This document is applicable to photographic reflection prints, made with ana

45319,IS,,ISO 18938:2008,Imaging materials — Optical discs — Care and handling for extended storage,Matériaux pour l'image — Disques optiques — Précautions et manipulation pour stockage étendu,2008-09-01,1,"['35.220.30','37.040.99']",ISO/TC 42,9599,,[63076],['en'],24,"<p>ISO 18938:2008 establishes general principles for the care and handling of digital optical discs during use. It addresses the issues of physical integrity of the medium necessary to preserve access to the recorded data (information). ISO 18938:2008 includes recommendations for handling procedures to maximize the effective life of optical discs. Faulty handling, packing and transporting techniques and methods often cause phys

6571,IS,,ISO 1894:1979,Withdrawal of ISO 1894-1979,Annulation de l'ISO 1894-1979,1979-07-01,2,['55.180.10'],ISO/TC 104,9599,,[6076],"['en','fr']",1,

51518,IS,,ISO 18941:2011,Imaging materials — Colour reflection prints — Test method for ozone gas fading stability,Matériaux pour l'image — Tirages par réflexion en couleurs — Méthode d'essai de la stabilité de la décoloration à l'ozone,2011-11-23,1,['37.040.20'],ISO/TC 42,9599,,[72837],['en'],23,"<p>ISO 18941:2011 describes the equipment, methods and procedures for generating a known ozone exposure and the subsequent measurement and quantification of the amount of change produced within both digitally printed hardcopy images and traditional analogue photographic colour print images due to that exposure.</p>"

72837,IS,,ISO 18941:2017,Imaging materials — Colour reflection prints — Test method for ozone gas fading stability,Matériaux pour l'image — Tirages par réflexion en couleurs — Méthode d'essai de la stabilité de la décoloration à l'ozone,2017-07-18,2,['37.040.20'],ISO/TC 42,9599,[51518],[78200],['en'],24,"<p>ISO 18941:2017 describes the equipment, methods and procedures for generating a known ozone exposure and the subsequent measurement and quantification of the amount of change produced within both digitally printed hardcopy images and traditional analogue photographic colour print images due to that exposure.</p><p>The test method described in this document uses increased levels of ozone t

31970,IS,,ISO 18944:2012,Imaging materials — Reflection colour photographic prints — Test print construction and measurement,Matériaux pour l'image — Réflexion des impressions photographiques en couleurs — Mesurage et construction d'une impression d'essai,2012-04-13,1,['37.040.20'],ISO/TC 42,9599,,[63080],['en'],25,

63080,IS,,ISO 18944:2014,Imaging materials — Reflection colour photographic prints — Test print construction and measurement,Matériaux pour l'image — Réflexion des impressions photographiques en couleurs — Mesurage et construction d'une impression d'essai,2014-05-30,2,['37.040.20'],ISO/TC 42,9599,[31970],[72190],['en'],31,"<p>ISO 18944:2014 specifies requirements and recommendations for the digital test file content, number of print replicates, printer setups and printing procedures that are used to generate target prints for test method standards and specifications for image stability in the context of reflection colour photographic prints.</p>"

31972,IS,,ISO 18946:2011,Imaging materials — Reflection colour photographic prints — Method for testing humidity fastness,Matériaux pour l'image — Tirages photographiques en couleurs par réflexion — Méthode d'essai de la solidité à l'humidité,2011-12-06,1,['37.040.20'],ISO/TC 42,9599,,[83566],['en'],13,"<p>ISO 18946:2012 describes test methods for evaluating reflection colour photographic prints with regard to changes in image appearance resulting from exposure to both low and high relative humidity.</p><p>The observed changes relate to colour, tone and loss of sharpness caused by horizontal and vertical diffusion of colorants from exposure to elevated humidity levels. Other humidity-related

31973,IS,,ISO 18947:2013,Imaging materials — Photographic reflection prints — Determination of abrasion resistance of photographic images,Matériaux pour l'image — Impressions de reflexion photographiques — Détermination de la résistance à l'abrasion des images photographiques,2013-05-02,1,['37.040.20'],ISO/TC 42,9599,,"[75677,75678]",['en'],11,"<p>ISO 18947:2013 specifies tests to determine the abrasion, scuff and smudge resistance of photographic images. It is applicable to photographic prints and photo books prepared by digital and analogue processes.</p>"

67243,IS,,ISO 18948:2018,Imaging materials — Photo books — Test methods for permanence and durability,Matériaux pour l’image — Albums photos — Méthodes d’essai de permanence et de durabilité,2018-11-13,1,['37.040.99'],ISO/TC 42,9599,,[89707],['en'],35,"<p>This document specifies test methods to assess the permanence and durability of photo books, including cover and pages.</p><p>This document is applicable to photo books which contain reflection colour prints made with colour hardcopy materials of all types, including those from either traditional analogue printing or modern digital printing processes. The same performance test methods apply, regardless of the printing process. Because of th

32050,IS,,ISO 19001:2002,In vitro diagnostic medical devices — Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology,Dispositifs médicaux de diagnostic in vitro — Informations fournies par le fabricant avec les réactifs de coloration de diagnostic in vitro utilisés en biologie,2002-11-15,1,"['11.040.55','11.100.10']",ISO/TC 212,9599,,[51984],"['en','fr']",16,"<p>ISO 19001:2002 specifies requirements for information supplied by the manufacturer with reagents used in staining in biology. It applies to producers, suppliers and vendors of dyes, stains, chromogenic reagents and other reagents used for staining in biology. The requirements for informati

63708,IS,,ISO 19008:2016,Standard cost coding system for oil and gas production and processing facilities,Système de codage des coûts standard pour les installations de production et de traitement du pétrole et du gaz,2016-08-24,1,['75.020'],ISO/TC 67,9599,,[88670],"['en','fr']",10,"<p>ISO 19008:2016 describes the standard cost coding system (SCCS) that classifies costs and quantities related to exploration, development, operation and removal of oil and gas production and processing facilities and to the petroleum, petrochemical and natural gas industry. Upstream, midstream, downstream and petrochemical business categories are included.</p><p>The SCCS for coding of costs is applicable to:</p

31169,IS,,ISO 19011:2002,Guidelines for quality and/or environmental management systems auditing,Lignes directrices pour l'audit des systèmes de management de la qualité et/ou de management environnemental,2002-10-03,1,"['13.020.10','03.120.10','03.100.70']",ISO/TC 176/SC 3,9599,"[23162,17940,23156,17941,23157,17942]",[50675],"['ar','en','es','fr']",31,"<p>ISO 19011:2002 provides guidance on the principles of auditing, managing audit programmes, conducting quality management system audits and en

50675,IS,,ISO 19011:2011,Guidelines for auditing management systems,Lignes directrices pour l'audit des systèmes de management,2011-11-11,2,"['13.020.10','03.120.10','03.100.70']",ISO/TC 176/SC 3,9599,[31169],[70017],"['en','es','fr','ru']",44,"<p>ISO 19011:2011 provides guidance on auditing management systems, including the principles of auditing, managing an audit programme and conducting management system audits, as well as guidance on the evaluation of competence of individuals involved in t

70017,IS,,ISO 19011:2018,Guidelines for auditing management systems,Lignes directrices pour l'audit des systèmes de management,2018-07-03,3,['03.120.20'],ISO/TMBG,9599,[50675],[88984],"['en','es','fr']",46,"<p>This document provides guidance on auditing management systems, including the principles of auditing, managing an audit programme and conducting management system audits, as well as guidance on the evaluation of competence of individuals involved in the audit process. These activities incl

38933,IS,,ISO 19012-1:2007,Optics and photonics — Designation of microscope objectives — Part 1: Flatness of field/Plan,Optique et photonique — Désignation des objectifs de microscope — Partie 1: Planéité du champ/Plan,2007-05-18,1,['37.020'],ISO/TC 172/SC 5,9599,,[57548],['en'],6,"<p>ISO 19012-1:2007 specifies the use of the marking, 'Plan' on microscope objectives, and defines the diameter of the sharp region of the primary image of a flat object surface. ISO 19012-1:2007 applies to visual observation using the combination of objective lens, tube lens and eyepiece as specified by the manufacturer.</p>"

57548,IS,,ISO 19012-1:2011,Microscopes — Designation of microscope objectives — Part 1: Flatness of field/Plan,Microscopes — Désignation des objectifs de microscope — Partie 1: Planéité du champ/Plan,2011-06-21,2,['37.020'],ISO/TC 172/SC 5,9599,[38933],[61652],['en'],6,"<p>ISO 19012-1:2011 specifies the use of the marking 'Plan' on microscope objectives, and defines the diameter of the sharp region of the primary image of a flat object surface. </p><p>ISO 19012-1:2011 applies to visual observation using the combination of objective lens, tube lens and eyepiece, as specified by the manufacturer.</p>"

46241,IS,,ISO 19012-2:2009,Optics and photonics — Designation of microscope objectives — Part 2: Chromatic correction,Optique et photonique — Désignation des objectifs de microscope — Partie 2: Correction chromatique,2009-07-24,1,['37.020'],ISO/TC 172/SC 5,9599,,[61836],['en'],5,<p>ISO 19012-2:2009 specifies classes of chromatic correction and defines minimum requirements regarding chromatic correction. The defined marking on the component enables the operator to correctly use the microscope.</p><p>The standard application for visual observation refers to the combination of objective and tube lens as specified by the manufacturer. The specifications regarding chromatic correction only refer

32054,IS,,ISO 19013-1:2005,Rubber hoses and tubing for fuel circuits for internal combustion engines — Specification — Part 1: Diesel fuels,Tuyaux de caoutchouc et flexibles pour les circuits de carburant pour les moteurs à combustion interne — Spécifications — Partie 1: Carburants diesel,2005-03-23,1,"['27.020','83.140.40']",ISO/TC 45/SC 1,9599,"[10596,10597,10598]",[77513],['en'],17,"<p>ISO 19013-1:2005 specifies the requirements for rubber tubing and hoses used in diesel fuel circuits for internal combustion engines. The diesel fuels covered include 'bio-diesels' which consist of the methyl ester of rape seed oil at levels up to 20 % by volume in conventional diesel fuels. In addition, th

32055,IS,,ISO 19013-2:2005,Rubber hoses and tubing for fuel circuits for internal combustion engines — Specification — Part 2: Gasoline fuels,Tuyaux de caoutchouc et flexibles pour les circuits de carburant pour les moteurs à combustion interne — Spécifications — Partie 2: Essences,2005-03-23,1,"['27.020','83.140.40']",ISO/TC 45/SC 1,9599,"[10596,10597,10598]",[65369],['en'],23,"<p>ISO 19013-2:2005 specifies the requirements for rubber tubing and hoses used in gasoline fuel circuits for internal combustion engines. The gasoline fuels covered include those containing oxygenates such as methanol and methyl tertiary-butyl ether (MTBE) and fuels that have become oxidized ('sour gas'). In additio

33730,IS,,ISO 19018:2004,"Ships and marine technology — Terms, abbreviations, graphical symbols and concepts on navigation","Navires et technologie maritime — Termes, abréviations, symboles graphiques et concepts relatifs à la navigation",2004-06-22,1,"['01.080.30','01.040.47','47.020.01']",ISO/TC 8/SC 6,9599,,[65692],"['en','ru']",24,"<p>ISO 19018:2004 contains terms, abbreviations and graphical symbols, which are to be used in maritime navigation on board ships. The application of abbreviations is useful, but they should not be used in mathematical formulae. Symbols for use in mathematical formulae are mentioned, if necessary.</p><p>Navigation is the process of position finding as well as