Withdrawn and superseded ISO standards — page 67 of 246

53964,IS,,ISO 18541-1:2014,Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 1: General information and use case definition,Véhicules routiers — Normalisation de l'accès aux informations relatives à la réparation et à la maintenance pour l'automobile (RMI) — Partie 1: Informations générales et définitions de cas d'usage,2014-09-18,1,"['43.040.15','43.180']",ISO/TC 22/SC 31,9599,,[77810],"['en','fr']",40,"<p>ISO 18541-1:2014 provides a general overview and structure of each part of ISO 18541. It also specifies use cases related to repair and maintenance information (RMI) systems in order to standardize the access to RMI for independent operators

53965,IS,,ISO 18541-2:2014,Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 2: Technical requirements,Véhicules routiers — Normalisation de l'accès aux informations relatives à la réparation et à la maintenance pour l'automobile (RMI) — Partie 2: Exigences techniques,2014-09-18,1,"['43.040.15','43.180']",ISO/TC 22/SC 31,9599,,[77811],"['en','fr']",30,<p>ISO 18541-2:2014 includes technical requirements which are related to automotive repair and maintenance information (RMI) systems in order to standardize access to RMI for independent operators.</p><p>ISO 18541-2:2014 specifies the minimum set of technical requirements related to a vehicle manu

53966,IS,,ISO 18541-3:2014,Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 3: Functional user interface requirements,Véhicules routiers — Normalisation de l'accès aux informations relatives à la réparation et à la maintenance pour l'automobile (RMI) — Partie 3: Exigences d'interface fonctionnelles pour l'utilisateur,2014-09-18,1,"['43.040.15','43.180']",ISO/TC 22/SC 31,9599,,[77812],"['en','fr']",13,<p>ISO 18541-3:2014 includes functional user interface requirements related to automotive repair and maintenance information (RMI) systems in order to standardize access to RMI for independent operators.</p><p>ISO 18541-3:2014 specifies all functi

57544,IS,,ISO 18541-4:2015,Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 4: Conformance test,Véhicules routiers — Normalisation de l'accès aux informations relatives à la réparation et à la maintenance pour l'automobile (RMI) — Partie 4: Tests de conformité,2015-10-26,1,"['43.040.15','43.180']",ISO/TC 22/SC 31,9599,,[77813],"['en','fr']",74,<p>ISO 18541-4:2015 specifies a conformance test for a vehicle manufacturer assessment of self-conformance of the VM RMI system. The conformance test cases follow the use case definition of ISO 18541‑1 and the requirements stated in ISO 18541‑2 and ISO 18541‑3.</p><p>The primary but not exclusive purpose

62851,IS,,ISO 18543:2017,Glass in building — Electrochromic glazings — Accelerated ageing test and requirements,Verre dans la construction — Vitrages électrochromes — Essai de vieillissement accéléré et exigences,2017-10-23,1,['81.040.20'],ISO/TC 160,9599,,[75536],"['en','fr']",14,"<p>ISO 18543:2017 specifies the accelerated ageing test and requirements for electrochromic (EC) glazings.</p><p>The test method described in ISO 18543:2017 is only applicable to chromogenic glazings that can be switched using an electrical stimulus from high to low transmission states and vice versa. This test method is not applicable to other chromogenic glazings such as photochromic and thermochromic glazings,

31177,IS,,ISO 18553:2002,"Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds","Méthode d'estimation de la dispersion du pigment et du noir de carbone dans les tubes, raccords et compositions à base de polyoléfines",2002-03-28,1,"['23.040.45','23.040.20']",ISO/TC 138/SC 5,9599,"[23413,19360]","[87843,77010]","['en','fr']",9,"<p>This International Standard describes a method with two procedures for the assessment of pigment or carbon black</p><p>particle and agglomerate size and degree of dispersion in polyolefin pipes, fittings and compounds.</p><p>The method is applicable to polyolefin pipes and fittings, as well as raw m

43870,IS,Amd,ISO 18553:2002/Amd 1:2007,"Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds — Amendment 1","Méthode d'estimation de la dispersion du pigment et du noir de carbone dans les tubes, raccords et compositions à base de polyoléfines — Amendement 1",2007-07-23,1,"['23.040.45','23.040.20']",ISO/TC 138/SC 5,9599,,"[87843,77010]","['en','fr']",1,

6524,IS,,ISO 1856:1980,"Polymeric materials, cellular flexible — Determination of compression set",Matériaux polymères alvéolaires souples — Détermination de la rémanence à la compression,1980-11-01,2,['83.100'],ISO/TC 45,9599,,[2330],"['en','fr']",2,

2330,IS,,ISO 1856:2000,Flexible cellular polymeric materials — Determination of compression set,Matériaux polymères alvéolaires souples — Détermination de la déformation rémanente après compression,2000-11-02,3,['83.100'],ISO/TC 45/SC 4,9599,[6524],[70213],"['en','fr']",4,

43717,IS,Amd,ISO 1856:2000/Amd 1:2007,Flexible cellular polymeric materials — Determination of compression set — Amendment 1,Matériaux polymères alvéolaires souples — Détermination de la déformation rémanente après compression — Amendement 1,2007-09-13,3,['83.100'],ISO/TC 45/SC 4,9599,,[70213],"['en','fr']",1,

62892,IS,,ISO 18562-1:2017,Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 1: Evaluation and testing within a risk management process,Évaluation de la biocompatibilité des voies de gaz respiratoires dans les applications de soins de santé — Partie 1: Évaluation et essais au sein d'un processus de gestion du risque,2017-03-13,1,['11.040.10'],ISO/TC 121/SC 3,9599,,[83409],"['en','fr']",23,"<p>ISO 18562-1:2017 specifies:</p><p>- the general principles governing the biological evaluation within a risk management process of the gas pathways of a medical device, its parts or accessories, which are intended to provide respiratory care or supply substance

62893,IS,,ISO 18562-2:2017,Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 2: Tests for emissions of particulate matter,Évaluation de la biocompatibilité des voies de gaz respiratoires dans les applications de soins de santé — Partie 2: Essais concernant les émissions de matières particulaires,2017-03-13,1,['11.040.10'],ISO/TC 121/SC 3,9599,,[83410],"['en','fr']",15,"<p>ISO 18562-2:2017 specifies tests for the emissions of particulate matter from the gas pathways of a medical device, its parts or accessories, which are intended to provide respiratory care or supply substances via the respiratory tract to a patient in all environments. The tests of this

62894,IS,,ISO 18562-3:2017,Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 3: Tests for emissions of volatile organic compounds (VOCs),Évaluation de la biocompatibilité des voies de gaz respiratoires dans les applications de soins de santé — Partie 3: Essais concernant les émissions de composés organiques volatils (COV),2017-03-13,1,['11.040.10'],ISO/TC 121/SC 3,9599,,[83411],"['en','fr']",12,"<p>ISO 18562-3:2017 specifies tests for the emissions of volatile organic compounds (vocs) from the gas pathways of a medical device, its parts or accessories, which are intended to provide respiratory care or supply substances via the respiratory tract to a pati

62895,IS,,ISO 18562-4:2017,Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 4: Tests for leachables in condensate,Évaluation de la biocompatibilité des voies de gaz respiratoires dans les applications de soins de santé — Partie 4: Essais concernant les substances relargables dans le condensat,2017-03-13,1,['11.040.10'],ISO/TC 121/SC 3,9599,,[82898],"['en','fr']",9,"<p>ISO 18562-4:2017 specifies tests for substances leached by liquid water condensing into gas pathways of a medical device, its parts or accessories, which are intended to provide respiratory care or supply substances via the respiratory tract to a patient in all environments. The tests of t

62896,IS,,ISO 18563-1:2015,Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 1: Instruments,Essais non destructifs — Caractérisation et vérification de l'appareillage de contrôle par ultrasons en multiéléments — Partie 1: Appareils,2015-06-08,1,['19.100'],ISO/TC 135/SC 3,9599,,[82513],"['en','fr']",39,"<p>ISO 18563-1:2015 identifies the functional characteristics of a multichannel ultrasonic phased array instrument used for phased array probes and provides methods for their measurement and verification.</p><p>ISO 18563-1:2015 can partly be applicable to ultrasonic phased array instruments in automated systems, but then, other tests might

69427,IS,,ISO 18563-2:2017,Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 2: Probes,Essais non destructifs — Caractérisation et vérification de l'appareillage de contrôle par ultrasons en multiéléments — Partie 2: Traducteurs,2017-07-24,1,['19.100'],ISO/TC 135/SC 3,9599,,[86593],"['en','fr']",9,"<p>ISO 18563-2:2017 specifies the characterization tests performed at the end of the fabrication of a phased array probe. It defines both methodology and acceptance criteria.</p><p>ISO 18563-2:2017 is applicable to the following phased array probes used for ultrasonic non-destructive testing in contact technique (with or without a wedge) or in

62897,IS,,ISO 18563-3:2015,Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 3: Combined systems,Essais non destructifs — Caractérisation et vérification de l'appareillage ultrasonore multi-éléments — Partie 3: Système complet,2015-12-08,1,['19.100'],ISO/TC 135/SC 3,9599,,[83174],"['en','fr']",34,"<p>ISO 18563-3:2015 addresses ultrasonic test systems implementing linear phased array probes, in contact (with or without wedge) or in immersion, with centre frequencies in the range of 0,5 MHz?10 MHz.</p><p>It provides methods and acceptance criteria for verifying the performance of combined equipment (i.e. instrument, probe and cables connect

29611,IS,,ISO 18573:2003,Conveyor belts — Test atmospheres and conditioning periods,Courroies transporteuses — Atmosphères d'essai et durées de conditionnement,2003-10-31,1,['53.040.20'],ISO/TC 41/SC 3,9599,,[61042],"['en','fr']",4,"<p>ISO 18573:2003 specifies the temperature, humidity and time conditions used for the conditioning and testing of all types of conveyor belt, irrespective of whether they have plastics or rubber covers. It also specifies the requirements for the time interval to be observed between production and testing of conveyor belt test pieces.</p><p>Special conditions applicable to a particular test or material or simulating a particular climatic environment are not inclu

61042,IS,,ISO 18573:2012,Conveyor belts — Test atmospheres and conditioning periods,Courroies transporteuses — Atmosphères d'essai et durées de conditionnement,2012-11-05,2,['53.040.20'],ISO/TC 41/SC 3,9599,[29611],[88544],"['en','fr']",4,"<p>ISO 18573:2012 specifies the temperature, humidity and time conditions used for the conditioning and testing of all types of conveyor belt, irrespective of whether they have plastics or rubber covers. It also specifies the requirements for the time interval to be observed between production and testing of conveyor belt test pieces.</p><p>Special conditions applicable to a particular test or material or simulating a particular climatic environment are no

35655,IS,,ISO 18589-1:2005,Measurement of radioactivity in the environment — Soil — Part 1: General guidelines and definitions,Mesurage de la radioactivité dans l'environnement — Sol — Partie 1: Lignes directrices générales et définitions,2005-05-30,1,"['17.240','13.080.01']",ISO/TC 85/SC 2,9599,,[71210],"['en','fr','ru']",13,"<p>ISO 18589-1:2005 specifies the general requirements to carry out radionuclides tests on soil sample, including sampling.</p><p>ISO 18589-1:2005 is addressed to people responsible for determining the radioactivity present in soils for the purpose of radiation protection. This may concern soils from gardens and farmland, urban or industrial sites, as well as soil not

40871,IS,,ISO 18589-2:2007,"Measurement of radioactivity in the environment — Soil — Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples","Mesurage de la radioactivité dans l'environnement — Sol — Partie 2: Lignes directrices pour la sélection de la stratégie d'échantillonnage, l'échantillonnage et le prétraitement des échantillons",2007-12-03,1,"['17.240','13.080.01']",ISO/TC 85/SC 2,9599,,[63916],"['en','fr','ru']",26,"<p>ISO 18589-2:2007 specifies the general requirements, based on ISO 11074 and ISO/IEC 17025, for all steps in the planning (desk study and area reconnaissance) of the sampling and the preparation of samples for testing. It incl

63916,IS,,ISO 18589-2:2015,"Measurement of radioactivity in the environment — Soil — Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples","Mesurage de la radioactivité dans l'environnement — Sol — Partie 2: Lignes directrices pour la sélection de la stratégie d'échantillonnage, l'échantillonnage et le prétraitement des échantillons",2015-01-31,2,"['17.240','13.080.01']",ISO/TC 85/SC 2,9599,[40871],[82293],"['en','fr']",25,"<p>ISO 18589-2:2015 specifies the general requirements, based on ISO 11074 and ISO/IEC 17025, for all steps in the planning (desk study and area reconnaissance) of the sampling and the preparation of samples for testing. It in

40875,IS,,ISO 18589-3:2007,Measurement of radioactivity in the environment — Soil — Part 3: Measurement of gamma-emitting radionuclides,Mesurage de la radioactivité dans l'environnement — Sol — Partie 3: Mesurage des radionucléides émetteurs gamma,2007-12-03,1,"['17.240','13.080.01']",ISO/TC 85/SC 2,9599,,[60059],"['en','fr','ru']",21,"<p>ISO 18589-3:2007 specifies the identification and the measurement of the activity in soils of a large number of gamma-emitting radionuclides using gamma spectrometry. This non-destructive method, applicable to large-volume samples (up to about 3 000 cm³), covers the determination in a single measurement of all the <i>g</i><i>-</i>emitters<i> </i>

60059,IS,,ISO 18589-3:2015,Measurement of radioactivity in the environment — Soil — Part 3: Test method of gamma-emitting radionuclides using gamma-ray spectrometry,Mesurage de la radioactivité dans l'environnement — Sol — Partie 3: Méthode d'essai des radionucléides émetteurs gamma par spectrométrie gamma,2015-02-13,2,"['17.240','13.080.01']",ISO/TC 85/SC 2,9599,[40875],[82294],"['en','fr']",22,"<p>ISO 18589-3:2015 specifies the identification and the measurement of the activity in soils of a large number of gamma-emitting radionuclides using gamma spectrometry. This non-destructive method, applicable to large-volume samples (up to about 3 000 cm³), covers the determination in a

40876,IS,,ISO 18589-4:2009,Measurement of radioactivity in the environment — Soil — Part 4: Measurement of plutonium isotopes (plutonium 238 and plutonium 239 + 240) by alpha spectrometry,Mesurage de la radioactivité dans l'environnement — Sol — Partie 4: Mesurage des isotopes du plutonium (plutonium 238 et plutonium 239 + 240) par spectrométrie alpha,2009-03-02,1,"['17.240','13.080.01']",ISO/TC 85/SC 2,9599,,[69086],"['en','fr']",22,"<p>ISO 18589-4:2009 describes a method for measuring plutonium 238 and 239 + 240 isotopes in soil by alpha spectrometry samples using chemical separation techniques. The method can be used for any type of environmental study or monitoring. These techniques can

40877,IS,,ISO 18589-5:2009,Measurement of radioactivity in the environment — Soil — Part 5: Measurement of strontium 90,Mesurage de la radioactivité dans l'environnement — Sol — Partie 5: Mesurage du strontium 90,2009-03-02,1,"['17.240','13.080.01']",ISO/TC 85/SC 2,9599,,[69074],"['en','fr']",30,"<p>ISO 18589-5:2009 describes the principles for the measurement of the activity of ⁹⁰Sr in equilibrium with ⁹⁰Y and ⁸⁹Sr, pure beta-emitting radionuclides, in soil samples. Different chemical separation methods are presented to produce strontium and yttrium sources, the activity of which is determined using proportional counter (PC) or liquid scintillation counter (

40878,IS,,ISO 18589-6:2009,Measurement of radioactivity in the environment — Soil — Part 6: Measurement of gross alpha and gross beta activities,Mesurage de la radioactivité dans l'environnement — Sol — Partie 6: Mesurage des activités alpha globale et bêta globale,2009-03-02,1,"['17.240','13.080.01']",ISO/TC 85/SC 2,9599,,[69069],"['en','fr']",12,"<p>ISO 18589-6:2009 provides a method that allows an estimation of gross radioactivity of alpha- and beta-emitters present in soil samples. ISO 18589-6:2009 applies, essentially, to systematic inspections based on comparative measurements or to preliminary site studies to guide the testing staff both in the choice of soil samples for measurement a

55362,IS,,ISO 18589-7:2013,Measurement of radioactivity in the environment — Soil — Part 7: In situ measurement of gamma-emitting radionuclides,Mesurage de la radioactivité dans l'environnement — Sol — Partie 7: Mesurage in situ des radionucléides émetteurs gamma,2013-09-23,1,"['17.240','13.080.01']",ISO/TC 85/SC 2,9599,,[90843],"['en','fr']",54,"<p>ISO 18589-7:2013 specifies the identification of radionuclides and the measurement of their activity in soil using <i>in situ</i> gamma spectrometry with portable systems equipped with germanium or scintillation detectors.</p><p>ISO 18589-7:2013 is suitable to rapidly assess the activity of artificial and natural radionuclides deposited on or pre

38763,IS,,ISO 18592:2009,Resistance welding — Destructive testing of welds — Method for the fatigue testing of multi-spot-welded specimens,Soudage par résistance — Essais destructifs des soudures — Méthode d'essai de fatigue des échantillons soudés par points multiples,2009-12-03,1,['25.160.40'],ISO/TC 44/SC 6,9599,,[72932],"['en','fr']",36,"<p>ISO 18592:2009 specifies test specimens and procedures for performing constant load amplitude fatigue tests on multi-spot-welded and multi-axial specimens in the thickness range from 0,5 mm to 5 mm at room temperature and a relative humidity of max. 80 %. The applicability of ISO 18592:2009 to larger thicknesses can be limited by mechanical properties

39849,IS,,ISO 18593:2004,Microbiology of food and animal feeding stuffs — Horizontal methods for sampling techniques from surfaces using contact plates and swabs,"Microbiologie des aliments — Méthodes horizontales pour les techniques de prélèvement sur des surfaces, au moyen de boîtes de contact et d'écouvillons",2004-06-11,1,['07.100.30'],ISO/TC 34/SC 9,9599,,[64950],"['en','fr']",8,"<p>ISO 18593:2004 specifies horizontal methods for sampling techniques using contact plates or swabs on surfaces in the food industry environment (and food processing plants), with a view of detecting or enumerating viable microorganisms.</p>"

38765,IS,,ISO 18595:2007,"Resistance welding — Spot welding of aluminium and aluminium alloys — Weldability, welding and testing","Soudage par résistance — Soudage par points de l'aluminium et des alliages d'aluminium — Soudabilité, soudage et essais",2007-08-27,1,['25.160.10'],ISO/TC 44/SC 6,9599,,[72933],"['en','fr']",21,"<p>ISO 18595:2007 specifies requirements for resistance spot welding in the fabrication of assemblies of aluminium sheet, extrusions (both work- and age-hardening alloys) and/or cast material comprising two or three thicknesses of metal, where the maximum single (sheet) thickness of components to be welded is within the range 0,6 mm to 6 mm.</p><p>ISO 18595:2007 is applic

4034,IS,,ISO 186:1977,Paper and board — Sampling for testing,Papier et carton — Échantillonnage pour essais,1977-11-01,1,['85.060'],ISO/TC 6,9599,,[4035],['en'],4,

4035,IS,,ISO 186:1985,Paper and board — Sampling to determine average quality,Papier et carton — Échantillonnage pour déterminer la qualité moyenne,1985-11-28,2,['85.060'],ISO/TC 6/SC 2,9599,[4034],[20673],"['en','fr']",4,

20673,IS,,ISO 186:1994,Paper and board — Sampling to determine average quality,Papier et carton — Échantillonnage pour déterminer la qualité moyenne,1994-11-10,3,['85.060'],ISO/TC 6/SC 2,9599,[4035],[34233],"['en','fr']",5,<p>Cancels and replaces the second edition (1985). Specifies a method of obtaining a representative sample from a lot of paper or board for testing to determine whether or not its average quality complies with set specifications including solid and corrugated fibreboard.</p>

6527,IS,,ISO 1860:1978,Information processing — Precision reels for magnetic tape used in interchange instrumentation applications,Traitement de l'information — Bobines de précision pour bandes magnétiques pour l'enregistrement de mesures,1978-07-01,2,['35.220.22'],ISO/IEC JTC 1,9599,,[6528],"['en','fr']",3,

31825,IS,,ISO 18613:2003,Repair of flat wooden pallets,Réparation des palettes plates en bois,2003-05-05,1,['55.180.20'],ISO/TC 51,9599,,"[62562,61431]","['en','fr']",14,"<p>ISO 18613:2003 specifies the maximum defects and damage allowed before a flat wooden pallet shall be repaired, and defines the minimum repair criteria that shall be used.</p><p>This European Standard is applicable to wooden flat pallets repaired with wood based components.</p><p>NOTE The maximum allowed defects and damage for pallets are described in this standard and the annexes A to D show examples of defects and damage which make the widely used pallets unacceptable for use. For other pallet types similar criteria sho

63031,IS,,ISO 18618:2018,Dentistry — Interoperability of CAD/CAM systems,Médecine bucco-dentaire — Interopérabilité des systèmes de CFAO,2018-05-30,1,['11.060.01'],ISO/TC 106/SC 9,9599,,[79923],"['en','fr']",64,<p>This document specifies an extensible markup language (XML) format to facilitate the transfer of dental case data and CAD/CAM data between software systems.</p>

79923,IS,,ISO 18618:2022,Dentistry — Interoperability of CAD/CAM systems,Médecine bucco-dentaire — Interopérabilité des systèmes de CFAO,2022-09-02,2,['11.060.01'],ISO/TC 106/SC 9,9599,[63031],[85712],"['en','fr']",71,<p>This document specifies an extensible markup language (XML) format to facilitate the transfer of dental case data and CAD/CAM data between software systems.</p>

63064,IS,,ISO 18626:2014,Information and documentation — Interlibrary Loan Transactions,Information et documentation — Transactions de prêt interlibrairies,2014-07-09,1,['35.240.30'],ISO/TC 46/SC 4,9599,,[73679],['en'],32,<p>ISO 18626:2014 specifies the transactions between libraries or libraries and other agencies to handle requests for library items and the following exchange of messages.</p>

73679,IS,,ISO 18626:2017,Information and documentation — Interlibrary Loan Transactions,Information et documentation — Transactions de prêt interlibrairies,2017-12-11,2,['35.240.30'],ISO/TC 46/SC 4,9599,[63064],[79013],['en'],34,<p>ISO 18626:2017 specifies the transactions between libraries or libraries and other agencies to handle requests for library items and the following exchange of messages.</p>

6531,IS,,ISO 1863:1976,"Information processing — 9- track, 12,7 mm (0.5 in) wide magnetic tape for information interchange recorded at 32 rpmm (800 rpi)","Traitement de l'information — Bande magnétique à 9 pistes, de 12,7 mm (0,5 in) de large, pour l'échange d'information, enregistrée à 32 rangées par millimètre (800 rpi)",1976-05-01,1,['35.220.22'],ISO/IEC JTC 1,9599,,[6532],"['en','fr']",8,

52226,IS,,ISO 18632:2010,Alloyed steel — Determination of manganese — Potentiometric and visual titration method,Aciers alliés — Détermination de la teneur en manganèse — Méthodes de titration visuelle et potentiométrique,2010-06-04,1,['77.140.20'],ISO/TC 17/SC 1,9599,,[73383],"['en','ru']",11,"<p>ISO 18632:2010 specifies a potentiometric or visual titration method for the determination of the mass fraction of manganese in alloyed steels. The method is applicable to mass fractions of manganese between 2 % and 25 %. Vanadium and cerium interfere with the measurement. If the mass fraction of cerium in the sample is less than 0,01 %, or the mass fraction of vanadium in the sample is less than 0

6533,IS,,ISO 1864:1984,"Information processing — Unrecorded 12,7 mm (0.5 in) wide magnetic tape for information interchange — 32 ftpmm (800 ftpi) NRZ1, 126 ftpmm (3 200 ftpi) phase encoded and 356 ftpmm (9 042 ftpi), NRZ1","Traitement de l'information — Bande magnétique vierge de 12,7 mm (0,5 in) de large, pour l'échange d'information — 32 ftpmm (800 ftpi) NRZ1, 126 ftpmm (3 200 ftpi) par codage de phase et 356 ftpmm (9 042 ftpi), NRZ1",1984-02-01,2,['35.220.22'],ISO/IEC JTC 1,9599,,"[6535,6534]","['en','fr']",11,

6534,IS,,ISO 1864:1985,"Information processing — Unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange — 32 ftpmm (800 ftpi) NRZ1, 126 ftpmm (3 200 ftpi) phase encoded and 356 ftpmm (9 042 ftpi) NRZ1","Traitement de l'information — Bande magnétique vierge de 12,7 mm (0,5 in) de large, pour l'échange d'information — 32 ftpmm (800 ftpi) NRZ1, 126 ftpmm (3 200 ftpi) par codage de phase et 356 ftpmm (9 042 ftpi), NRZ1",1985-03-21,3,['35.220.22'],ISO/IEC JTC 1,9599,[6533],[6535],"['en','fr']",11,

69057,IS,,ISO 18646-2:2019,Robotics — Performance criteria and related test methods for service robots — Part 2: Navigation,Robotique — Critères de performance et méthodes d'essai correspondantes pour robots de service — Partie 2: Navigation,2019-04-11,1,['25.040.30'],ISO/TC 299,9599,,[82643],['en'],17,"<p>This document describes methods of specifying and evaluating the navigation performance of mobile service robots. Navigation performance in this document is measured by pose accuracy and repeatability, as well as the ability to detect and avoid obstacles. Other measures of navigation performance are available but are not covered in this document.</p><p>The criteria and related test methods

33545,IS,,ISO 18650-1:2004,Building construction machinery and equipment — Concrete mixers — Part 1: Vocabulary and general specifications,Machines et matériels pour la construction des bâtiments — Malaxeurs de béton — Partie 1: Vocabulaire et spécifications générales,2004-11-12,1,"['91.220','01.040.91']",ISO/TC 195/SC 1,9599,,[75172],"['en','fr']",27,<p>ISO 18650-1:2004 establishes additional terminology to describe the functioning and the required and optional components for various types of concrete mixers. The content of commercial literature specifications for these types of machines is defined.</p><p>ISO 18650-1:2004 applies to concrete mixers as defined in ISO 11375; truck mixers are

33546,IS,,ISO 18650-2:2006,Building construction machinery and equipment — Concrete mixers — Part 2: Procedure for examination of mixing efficiency,Machines et matériels pour la construction des bâtiments — Malaxeurs de béton — Partie 2: Mode opératoire pour la détermination de l'efficacité de malaxage,2006-04-20,1,['91.220'],ISO/TC 195/SC 1,9599,,[66214],"['en','fr']",19,<p>ISO 18650-2:2006 specifies the procedure and requirements for examination of the mixing efficiency of batch-type and continuous-type concrete mixers as defined in ISO 18650-1. It is applicable to concrete mixers having a rated capacity greater than or equal to 70/50.</p>

66214,IS,,ISO 18650-2:2014,Building construction machinery and equipment — Concrete mixers — Part 2: Procedure for examination of mixing efficiency,Machines et matériels pour la construction des bâtiments — Malaxeurs de béton — Partie 2: Mode opératoire pour la détermination de l'efficacité de malaxage,2014-09-17,2,['91.220'],ISO/TC 195/SC 1,9599,[33546],[84916],"['en','fr']",19,<p>ISO 18650-2:2014 specifies the procedure and requirements for examination of the mixing efficiency of batch-type and continuous-type concrete mixers as defined in ISO 18650-1. It is applicable to concrete mixers having a rated capacity greater than or equal to 70/50.</p>

50641,IS,,ISO 18651-1:2011,Building construction machinery and equipment — Internal vibrators for concrete — Part 1: Terminology and commercial specifications,Machines et matériels pour la construction des bâtiments — Vibrateurs internes pour le béton — Partie 1: Terminologie et spécifications commerciales,2011-03-18,1,['91.220'],ISO/TC 195/SC 1,9599,,[85883],"['en','fr']",16,<p>ISO 18651:2011 specifies the terminology and gives commercial specifications for internal vibrators used for concrete mix compaction.</p>

63152,IS,,ISO 18665:2015,Traditional Chinese medicine — Herbal decoction apparatus,Médecine traditionnelle chinoise — Appareil décoction herbe-médicinale,2015-11-06,1,"['11.040.99','23.020.30','27.060.30']",ISO/TC 249/SC 1,9599,,[83597],['en'],8,"<p>ISO 18665.2015 specifies the general requirements of herbal decoction apparatus with design pressures less than 0,1MPa. It includes both hermetic and non-hermetic decoction apparatus. </p><p>It is applicable to the herbal decoction apparatus for individual herbal formula prescriptions and for commercial use as well as private use. It also applies to the decocting part of the integrated apparatus of decoction and package.</p>"

63153,IS,,ISO 18666:2015,Traditional Chinese medicine — General requirements of moxibustion devices,Médecine traditionnelle chinoise — Exigences générales concernant les dispositifs de moxibustion,2015-11-06,1,['11.040.99'],ISO/TC 249/SC 1,9599,,[83343],['en'],11,"<p>ISO 18666:2015 specifies the general requirements for configuration, materials, performance and safety requirements of moxibustion devices. It also specifies the minimum requirements for moxibustion materials used in moxibustion devices.</p><p>It is applicable across a wide range of moxibustion devices that uses moxa floss as the main combustion material and can remain on or over the body throughout the moxibustion process. It i

33553,IS,,ISO 18669-1:2004,Internal combustion engines — Piston pins — Part 1: General specifications,Moteurs à combustion interne — Axes de pistons — Partie 1: Spécifications générales,2004-09-10,1,['43.060.10'],ISO/TC 22,9599,,[55369],['en'],20,"<p>ISO 18669-1:2004 specifies the essential dimensional characteristics of piston pins of outer diameter from 8 mm up to 100 mm, for reciprocating internal combustion engines. In addition, it establishes a vocabulary, a pin-type classification, material description based on mechanical properties, common features and quality requirements. It may also be used for piston pins of compressors working under analogous conditions.</p><p>In certain applicat

55369,IS,,ISO 18669-1:2013,Internal combustion engines — Piston pins — Part 1: General specifications,Moteurs à combustion interne — Axes de pistons — Partie 1: Spécifications générales,2013-07-23,2,['43.060.10'],ISO/TC 22/SC 34,9599,[33553],[75123],['en'],24,"<p>ISO 18669-1:2013 specifies the essential dimensional characteristics of piston pins with an outer diameter between 8 mm and 100 mm, for reciprocating internal combustion engines for road vehicles and other applications. In addition, it establishes a vocabulary, a pin-type classification, material description based on mechanical properties, common features and quality requirements.</p>"

35698,IS,,ISO 18669-2:2004,Internal combustion engines — Piston pins — Part 2: Inspection measuring principles,Moteurs à combustion interne — Axes de pistons — Partie 2: Principes de mesure pour le contrôle,2004-09-10,1,['43.060.10'],ISO/TC 22/SC 34,9599,,[63636],['en'],10,"<p>ISO 18669-2:2004 defines the measuring principles to be used for measuring piston pins; it applies to piston pins from 8 mm up to and including 100 mm outside diameter for reciprocating internal combustion engines and compressors.</p><p>In certain applications, except road vehicles, and provided that mutual agreement is made between the purchaser and the manufacturer, ISO 18669-2:2004 may be used with suitable modifica

63636,IS,,ISO 18669-2:2020,Internal combustion engines — Piston pins — Part 2: Inspection measuring principles,Moteurs à combustion interne — Axes de pistons — Partie 2: Principes de mesure pour le contrôle,2020-04-24,2,['43.060.10'],ISO/TC 22/SC 34,9599,[35698],[83287],['en'],14,"<p>This document defines the measuring principles used for measuring piston pins; it applies to piston pins with a nominal outer diameter from 8 mm up to and including 100 mm, for reciprocating internal combustion engines for road vehicles and other applications.</p><p>In certain applications, except road vehicles, and provided that mutual agreement is made between the purchaser and the manufacturer, this document

63173,IS,,ISO 18676:2017,Space systems — Guidelines for the management of systems engineering,Systèmes spatiaux — Lignes directrices pour le management de l'ingénierie système,2017-12-01,1,['49.140'],ISO/TC 20/SC 14,9599,,[87631],['en'],17,"<p>ISO 18676:2017 presents the guidelines for the management of systems engineering for space systems.</p><p>ISO 18676:2017 addresses the systems engineering activities and provides guidelines for interfacing with specific major management subjects (e.g. configuration management, data management, interface management, risk management, requirements management, and integrated logistics support), which are themselves the subject of this document.</p><p>ISO 1

70289,IS,,ISO 18692-1:2018,Fibre ropes for offshore stationkeeping — Part 1: General specification,Cordages en fibres pour le maintien en position des structures marines — Partie 1: Spécification générale,2018-11-30,1,['59.080.50'],ISO/TC 38,9599,[38805],[90270],"['en','fr']",47,<p>This document specifies the main characteristics and test methods of new fibre ropes used for offshore station keeping.</p><p>Fibre ropes for stationkeeping can be manufactured from different rope core material.</p><p>This document provides general requirements applicable to all materials. The subsequent parts of the ISO 18692 series provide the specific requirements for each (rope core) material that are not addr

38805,IS,,ISO 18692:2007,Fibre ropes for offshore stationkeeping — Polyester,Cordages en fibres pour le maintien en position des structures marines — Polyester,2007-02-15,1,['59.080.50'],ISO/TC 38,9599,,"[70289,70290]","['en','fr']",43,<p>ISO 18692:2007 specifies the main characteristics and test methods of new polyester fibre ropes used for offshore stationkeeping.</p>

4036,IS,,ISO 187:1977,Paper and board — Conditioning of samples,Papier et carton — Conditionnement des échantillons,1977-09-01,1,['85.060'],ISO/TC 6/SC 2,9599,,[4037],"['en','fr']",2,

4037,IS,,ISO 187:1990,"Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples","Papier, carton et pâtes — Atmosphère normale de conditionnement et d'essai et méthode de surveillance de l'atmosphère et de conditionnement des échantillons",1990-12-13,2,"['85.060','85.040']",ISO/TC 6/SC 2,9599,[4036],[80311],"['en','fr']",8,"<p>Specifies the standard atmosphere for conditioning and testing pulp, paper, and board, and also the procedures for measuring the temperature and relative humidity. For the conditioning of laboratory prepared handsheets in accordance with ISO 5269-1, the standard atmosphere is that

6542,IS,,ISO 1871:1975,Agricultural food products — General directions for the determination of nitrogen by the Kjeldahl method,Produits agricoles alimentaires — Directives générales pour le dosage de l'azote selon la méthode de Kjeldahl,1975-12-01,1,['67.050'],ISO/TC 34,9599,,[41320],"['en','fr']",5,"<p>Application to products containing only nitrogenous copounds which are directly determinable by the Kjeldahl method. The method consists in destructing of organic matter by sulphuric acid in the presence of a catalyst, rendering of the reaction product alkaline, distillation and titration of the liberated ammonia.</p>"

6544,IS,,ISO 1872-1:1986,Plastics — Polyethylene (PE) and ethylene copolymer thermoplastics — Part 1: Designation,Plastiques — Thermoplastiques à base de polyéthylène (PE) et de copolymères d'éthylène — Partie 1: Désignation,1986-09-04,1,['83.080.20'],ISO/TC 61/SC 9,9599,[6543],[21123],"['en','fr']",6,

21123,IS,,ISO 1872-1:1993,Plastics — Polyethylene (PE) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Polyéthylène (PE) pour moulage et extrusion — Partie 1: Système de désignation et base de spécification,1993-12-23,2,['83.080.20'],ISO/TC 61/SC 9,9599,[6544],"[59211,60831]","['en','fr']",7,"<p>The types of polyethylene plastics are differentiated from each other by a classification system based on appropriate levels of the designatory properties density and melt flow rate and on information about the intended application and/or method of processing, important properties, additives, colorants, fillers and reinforcing materials. Is appl

6543,IS,,ISO 1872:1972,Polyethylene thermoplastic materials — Designation,Matériaux thermoplastiques à base de polyéthylène — Désignation,1972-01-01,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[6544],"['en','fr']",4,

6545,IS,,ISO 1872-2:1989,Plastics — Polyethylene (PE) and ethylene copolymer thermoplastics — Part 2: Preparation of test specimens and determination of properties,Plastiques — Thermoplastiques à base de polyéthylène (PE) et de copolymères d'éthylène — Partie 2: Préparation des éprouvettes et détermination des caractéristiques,1989-10-12,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[21111],"['en','fr']",5,

21111,IS,,ISO 1872-2:1997,Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Polyéthylène (PE) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,1997-03-27,2,['83.080.20'],ISO/TC 61/SC 9,9599,[6545],[38243],"['en','fr']",6,

28381,IS,Amd,ISO 1872-2:1997/Amd 1:2000,Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Amendment 1,Plastiques — Polyéthylène (PE) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés — Amendement 1,2000-06-08,2,['83.080.20'],ISO/TC 61/SC 9,9599,,[38243],"['en','fr']",1,

38243,IS,,ISO 1872-2:2007,Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Polyéthylène (PE) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,2007-01-26,3,['83.080.20'],ISO/TC 61/SC 9,9599,"[28381,21111]","[66827,50597]","['en','fr']",8,<p>ISO 1872-2:2007 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyethylene (PE) moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before

6546,IS,,ISO 1873-1:1986,Plastics — Polypropylene (PP) and propylene-copolymer thermoplastics — Part 1: Designation,Plastiques — Thermoplastiques à base de polypropylène (PP) et de copolymères de propylène — Partie 1: Désignation,1986-09-25,2,['83.080.20'],ISO/TC 61/SC 9,9599,,[6547],"['en','fr']",,

6547,IS,,ISO 1873-1:1991,Plastics — Polypropylene (PP) and propylene-copolymer thermoplastics — Part 1: Designation,Plastiques — Thermoplastiques à base de polypropylène (PP) et de copolymères de propylène — Partie 1: Désignation,1991-07-11,3,['83.080.20'],ISO/TC 61/SC 9,9599,"[5337,6546]",[23928],"['en','fr']",10,

23928,IS,,ISO 1873-1:1995,Plastics — Polypropylene (PP) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Polypropylène (PP) pour moulage et extrusion — Partie 1: Système de désignation et base de spécification,1995-08-24,4,['83.080.20'],ISO/TC 61/SC 9,9599,[6547],"[63872,45068]","['en','fr']",8,"<p>Establishes a system of designation for polypropylene moulding and extrusion materials, which may be used as the basis for specifications. Polypropylenes are differentiated from each other by the levels of the designatory properties such as tensile modulus, impact strength and melt index includingly modifications by colorants, additives, fille

6548,IS,,ISO 1873-2:1989,Plastics — Polypropylene (PP) and propylene-copolymer thermoplastics — Part 2: Preparation of test specimens and determination of properties,Plastiques — Thermoplastiques à base de polypropylène (PP) et de copolymères de propylène — Partie 2: Préparation des éprouvettes et détermination des caractéristiques,1989-10-12,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[21110],"['en','fr']",5,

21110,IS,,ISO 1873-2:1997,Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Polypropylène (PP) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,1997-03-27,2,['83.080.20'],ISO/TC 61/SC 9,9599,[6548],"[42465,36270]","['en','fr']",6,

28382,IS,Amd,ISO 1873-2:1997/Amd 1:2000,Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Amendment 1,Plastiques — Polypropylène (PP) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés — Amendement 1,2000-06-08,2,['83.080.20'],ISO/TC 61/SC 9,9599,,"[42465,36270]","['en','fr']",1,

42465,IS,,ISO 1873-2:2007,Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Polypropylène (PP) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,2007-08-28,3,['83.080.20'],ISO/TC 61/SC 9,9599,"[28382,21110]",[66828],"['en','fr']",7,<p>ISO 1873-2:2007 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of PP moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given.</p

54395,IS,,ISO 18738-1:2012,Measurement of ride quality — Part 1: Lifts (elevators),Mesure de la qualité de déplacement — Partie 1: Ascenseurs,2012-10-01,1,['91.140.90'],ISO/TC 178,9599,[33586],[73086],"['en','fr']",18,<p>This part of ISO 18738 specifies requirements and methodology for the measurement and reporting of lift ride quality during lift motion. It does not specify acceptable or unacceptable ride quality.</p><p>NOTE Lift performance parameters are often referenced in conjunction with lift ride quality. Parameters relevant to lift performance include jerk and acceleration. This part of ISO 18738 defines and uses performance parameters where they are integral to the evaluation of rid

43202,IS,,ISO 18738-2:2012,Measurement of ride quality — Part 2: Escalators and moving walks,Mesure de la qualité de déplacement — Partie 2: Escaliers mécaniques et trottoirs roulants,2012-10-01,1,['91.140.90'],ISO/TC 178,9599,,[73113],"['en','fr']",16,<p>This part of ISO 18738 specifies requirements and methodology for the measurement and reporting</p><p>of escalator and moving walk ride quality. This part of ISO 18738 does not specify acceptable or</p><p>unacceptable ride quality values.</p>

33586,IS,,ISO 18738:2003,Lifts (elevators) - Measurement of lift ride quality,Ascenseurs - Mesure de la qualité de déplacement d'un ascenseur,2003-07-25,1,['91.140.90'],ISO/TC 178,9599,,[54395],"['en','fr']",17,<p>ISO 18738:2002 specifies requirements and methodology for the measurement and reporting<i> </i>of lift ride quality during lift motion. It does not specify acceptable or unacceptable ride quality.</p><p>Lift performance parameters are<i> </i>often referenced in conjunction with lift ride quality. Parameters relevant to lift performance include jerk and acceleration<i>. </i>ISO 18738:2003 defines and uses performance parameters where they are integral to the evaluation of ride quali

63227,IS,,ISO 18739:2016,Dentistry — Vocabulary of process chain for CAD/CAM systems,Médecine bucco-dentaire — Vocabulaire de la chaîne de procédé applicable aux systèmes de CFAO,2016-03-08,1,['11.060.01'],ISO/TC 106/SC 9,9599,,[83917],"['en','fr']",11,"<p>ISO 18739:2016 specifies terms, synonyms for terms and definitions used in the process chain for CAD/CAM systems in dentistry.</p>"

6550,IS,,ISO 1874-1:1985,Plastics — Polyamide (PA) homopolymers for moulding and extrusion — Part 1: Designation,Plastiques — Homopolymères polyamides pour moulage et extrusion — Partie 1: Désignation,1985-12-19,1,['83.080.20'],ISO/TC 61/SC 9,9599,[6549],[6551],"['en','fr']",7,

6551,IS,,ISO 1874-1:1992,Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation,Plastiques — Matériaux polyamides (PA) pour moulage et extrusion — Partie 1: Désignation,1992-02-19,2,['83.080.20'],ISO/TC 61/SC 9,9599,[6550],[41675],"['en','fr']",10,<p>Establishes a data block designation system which may be used as the basis for specifications. Tabulates the codes used in the data blocks. Gives examples of designations.</p>

41675,IS,,ISO 1874-1:2010,Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation system and basis for specification,Plastiques — Matériaux polyamides (PA) pour moulage et extrusion — Partie 1: Système de désignation et base de spécification,2010-11-08,3,['83.080.20'],ISO/TC 61/SC 9,9599,[6551],[56516],"['en','fr']",15,"<p>ISO 1874-1:2010 establishes a system of designation for polyamide (PA) thermoplastic materials, which may be used as the basis for specifications.</p><p>It covers polyamide homopolymers for moulding and extrusion based on PA 6, PA 66, PA 69, PA 610, PA 612, PA 11, PA 12, PA MXD6, PA 46, PA 1212, PA 4T, PA 6T and PA 9T and copolyamides of various co

6552,IS,,ISO 1874-2:1987,Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériaux polyamides (PA) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,1987-12-10,1,['83.080.20'],ISO/TC 61/SC 9,9599,[6549],[23946],"['en','fr']",4,

23946,IS,,ISO 1874-2:1995,Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériaux polyamides (PA) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,1995-12-07,2,['83.080.20'],ISO/TC 61/SC 9,9599,[6552],[34835],"['en','fr']",6,<p>Specifies the methods of preparation of test specimens and the test methods for the determination of the properties of polyamide moulding and extrusion materials. Gives requirements for handling test material and for conditioning. Properties which are suitable and necessary to characterize polyamides are listed.</p>

34835,IS,,ISO 1874-2:2006,Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériaux polyamides (PA) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,2006-11-22,3,['83.080.20'],ISO/TC 61/SC 9,9599,[23946],[55458],"['en','fr']",7,<p>ISO 1874-2:2006 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyamide moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given.<

52170,IS,Amd,ISO 1874-2:2006/Amd 1:2010,Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Amendment 1: Laser sintering of specimens,Plastiques — Matériaux polyamides (PA) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés — Amendement 1: Frittage laser des éprouvettes,2010-11-04,3,['83.080.20'],ISO/TC 61/SC 9,9599,,[55458],"['en','fr']",2,

55458,IS,,ISO 1874-2:2012,Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériaux polyamides (PA) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,2012-11-08,4,['83.080.20'],ISO/TC 61/SC 9,9599,"[34835,52170]",[67792],"['en','fr']",10,"<p>ISO 1874-2:2012 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyamide moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing a

69433,IS,,ISO 18750:2018,Intelligent transport systems — Co-operative ITS — Local dynamic map,Système de transports intelligents — Systèmes coopératifs — Carte locale dynamique,2018-05-23,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,[63273],[88233],"['en','fr']",70,"<div id='MathJax_Message' style='display: none;'></div><p>This document:</p><p>— describes the functionality of a 'Local Dynamic Map' (LDM) in the context of the 'Bounded Secured Managed Domain' (BSMD);</p><p>— specifies:</p><p style='padding-left: 40px;'>— general characteristics of LDM Data Objects (LDM-DOs) that may be stored in an LDM, i.e. information on real objects such as vehicles, road works sections, slow traf

38860,IS,,ISO 18752:2006,Rubber hoses and hose assemblies — Wire- or textile-reinforced single-pressure types for hydraulic applications — Specification,Tuyaux et flexibles en caoutchouc — Types hydrauliques avec armature de fils métalliques tressés — Spécifications,2006-07-06,1,['23.040.70'],ISO/TC 45/SC 1,9599,,[57774],['en'],16,"<p>ISO 18752:2006 specifies requirements for nine classes, four grades and seven types of wire- or textile-reinforced hydraulic hoses and hose assemblies of nominal sizes ranging from 5 to 102. Each class has a single maximum working pressure for all sizes. Such hoses are suitable for use with hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temp

56724,IS,Amd,ISO 18752:2006/Amd 1:2010,Rubber hoses and hose assemblies — Wire- or textile-reinforced single-pressure types for hydraulic applications — Specification — Amendment 1,Tuyaux et flexibles en caoutchouc — Types hydrauliques avec armature de fils métalliques tressés — Spécifications — Amendement 1,2010-09-22,1,['23.040.70'],ISO/TC 45/SC 1,9599,,[57774],['en'],2,

57774,IS,,ISO 18752:2012,Rubber hoses and hose assemblies — Wire- or textile-reinforced single-pressure types for hydraulic applications — Specification,Tuyaux et flexibles en caoutchouc — Types hydrauliques avec armature de fils métalliques tressés — Spécifications,2012-10-29,2,['23.040.70'],ISO/TC 45/SC 1,9599,"[38860,56724]",[64914],['en'],15,

64914,IS,,ISO 18752:2014,Rubber hoses and hose assemblies — Wire- or textile-reinforced single-pressure types for hydraulic applications — Specification,"Tuyaux et flexibles en caoutchouc — Types hydrauliques à pression unique, avec armature de fils métalliques ou textiles tressés — Spécifications",2014-03-20,3,['23.040.70'],ISO/TC 45/SC 1,9599,[57774],[80596],"['en','fr']",16,"<p>ISO 18752:2014 specifies requirements for ten classes, four grades and seven types of wire- or textile-reinforced hydraulic hoses and hose assemblies of nominal sizes ranging from 5 to 102. Each class has a single maximum working pressure for all sizes. Such hoses are suitable for use with hydraulic fluids HH, HL,

80596,IS,,ISO 18752:2022,Rubber hoses and hose assemblies — Wire- or textile-reinforced single-pressure types for hydraulic applications — Specification,"Tuyaux et flexibles en caoutchouc — Types hydrauliques à pression unique, avec armature de fils métalliques ou textiles tressés — Spécifications",2022-03-28,4,['23.040.70'],ISO/TC 45/SC 1,9599,[64914],[89310],"['en','fr']",16,"<p>This document specifies requirements for ten classes, four grades and seven types of wire- or textile-reinforced hydraulic hoses and hose assemblies of nominal sizes ranging from 5 to 102. Each class has a single maximum working pressure for all sizes.</p><p>They are suitable for use with:</p><p>— oil-based hydr

31899,IS,,ISO 18753:2004,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of absolute density of ceramic powders by pyknometer",Céramiques techniques — Détermination de la masse volumique absolue des poudres céramiques à l'aide d'un pycnomètre,2004-08-06,1,['81.060.30'],ISO/TC 206,9599,,[65414],"['en','fr']",6,<p>ISO 18753:2004 specifies a method for determining the particle density of fine ceramic powders using liquid pyknometry.</p>

31900,IS,,ISO 18754:2003,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of density and apparent porosity",Céramiques techniques — Détermination de la masse volumique et de la porosité apparente,2003-08-20,1,['81.060.30'],ISO/TC 206,9599,,[55448],"['en','fr']",5,"<p>ISO 18754:2003 specifies a method for the determination of the apparent solid density, bulk density and apparent porosity of fine ceramics.</p><p>This method is not appropriate for the determination of an apparent porosity greater than 10 %. For materials with higher porosity, the accuracy of the measurement may not be satisfactory. The method may also not give satisfactory open porosity result if

55448,IS,,ISO 18754:2013,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of density and apparent porosity",Céramiques techniques — Détermination de la masse volumique et de la porosité apparente,2013-02-12,2,['81.060.30'],ISO/TC 206,9599,[31900],[69745],['en'],7,"<p>ISO 18754:2013 specifies methods for the determination of the apparent solid density, bulk density, apparent density and geometric bulk density of fine ceramics.</p>"

31901,IS,,ISO 18755:2005,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of thermal diffusivity of monolithic ceramics by laser flash method",Céramiques techniques — Détermination de la diffusivité thermique des céramiques monolithiques par la méthode flash laser,2005-03-21,1,['81.060.30'],ISO/TC 206,9599,,[81531],['en'],31,<p>ISO 18755:2005 specifies the test method for the determination of thermal diffusivity from room temperature to 1700 K by the laser flash method for homogeneous monolithic ceramics with porosity less than 10 %.</p>

67706,IS,,ISO 18758-1:2018,Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 1: Vocabulary,Engins d'exploitation minière et de terrassement — Appareils de forage et de renfort de roches — Partie 1: Vocabulaire,2018-05-30,1,"['73.100.30','01.040.73','01.040.53','53.100']",ISO/TC 82,9599,,[89257],['en'],20,"<p>This document defines terms relating to rock drill rigs and rock reinforcement rigs, including their intended use, working methods, types, and main components.</p><p>It also provides (see Annex A) several classifications of rock drill rigs, based on intended use, mobility and type of operation.</p><p>The primary use of this document is in instruction

66153,IS,,ISO 18774:2015,Securities and related financial instruments — Financial Instrument Short Name (FISN),Valeurs mobilières et instruments financiers connexes — Nom court de l'instrument financier (FISN),2015-10-29,1,['03.060'],ISO/TC 68/SC 8,9599,,[84851],['en'],12,<p>ISO 18774:2015 defines and describes rules for an internationally valid system for building short names of any kind of financial instrument within a defined structure.</p><p>This International Standard is intended for use in any application in the trading and administration of securities globally.</p><p>The FISN has been developed after taking into account the need of human-readability as well as interoperability with ex

38868,IS,,ISO 18775:2008,"Veneers — Terms and definitions, determination of physical characteristics and tolerances","Placages — Termes et définitions, détermination des caractéristiques physiques et tolérances",2008-01-24,1,"['79.060.01','01.040.79']",ISO/TC 89/SC 3,9599,,[75050],"['en','fr']",18,"<p>ISO 18775:2008 establishes the standard terms and definitions (including those relative to features and defects), the methods for the determination of physical characteristics and the tolerances for dimensions (length, width, thickness) for wood veneers, including natural, treated and multilaminar veneers, that can be obtained by slicing, rotary cutting or sawing.</p>"