Withdrawn and superseded ISO standards — page 66 of 246

40572,IS,,ISO 1833-11:2006,Textiles — Quantitative chemical analysis — Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid),Textiles — Analyse chimique quantitative — Partie 11: Mélanges de fibres de cellulose et de polyester (méthode à l'acide sulfurique),2006-06-02,1,['59.060.01'],ISO/TC 38,9599,"[6484,6483]",[70286],"['en','fr']",2,"<p>ISO 1833-11:2006 specifies a method, using sulfuric acid, to determine the proportion of cellulose fibre, after removal of non-fibrous matter, in textiles made of mixtures of natural and regenerated cellulose fibres and polyester fibre.</p>"

40573,IS,,ISO 1833-12:2006,"Textiles — Quantitative chemical analysis — Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide)","Textiles — Analyse chimique quantitative — Partie 12: Mélanges d'acrylique, certains modacryliques, certaines chlorofibres, certains élasthannes et de certaines autres fibres (méthode au diméthylformamide)",2006-06-02,1,['59.060.01'],ISO/TC 38,9599,"[6484,6483]",[73570],"['en','fr']",3,"<p>ISO 1833-12:2006 specifies a method, using dimethylformamide, to determine the percentage of acrylic, modacrylic, chlorofibre or elastane, after removal of non-fibrous matter, in textile

73570,IS,,ISO 1833-12:2019,"Textiles — Quantitative chemical analysis — Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with certain other fibres (method using dimethylformamide)","Textiles — Analyse chimique quantitative — Partie 12: Mélanges d'acrylique, certains modacryliques, certaines chlorofibres, certains élasthannes avec certaines autres fibres (méthode au diméthylformamide)",2019-02-26,2,['59.060.01'],ISO/TC 38,9599,[40573],[79801],"['en','fr']",3,"<p>This document specifies a method, using dimethylformamide, to determine the mass percentage of acrylic, modacrylic, chlorofibre or elastane, after removal of non-fibrous matter, in texti

40574,IS,,ISO 1833-13:2006,Textiles — Quantitative chemical analysis — Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone),Textiles — Analyse chimique quantitative — Partie 13: Mélanges de certaines chlorofibres et de certaines autres fibres (méthode au sulfure de carbone/acétone),2006-06-02,1,['59.060.01'],ISO/TC 38,9599,"[6484,6483]",[74877],"['en','fr']",3,"<p>ISO 1833-13:2006 specifies a method, using carbon disulfide/acetone, to determine the percentage of chlorofibre, after removal of non-fibrous matter, in textiles made of mixtures of certain chlorofibres, whether after-chlorinated or not, and wool, animal hair, silk, cotton, visc

40575,IS,,ISO 1833-14:2006,Textiles — Quantitative chemical analysis — Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid),Textiles — Analyse chimique quantitative — Partie 14: Mélanges d'acétate et de certaines chlorofibres (méthode à l'acide acétique),2006-06-02,1,['59.060.01'],ISO/TC 38,9599,"[6484,6483]",[74878],"['en','fr']",2,"<p>ISO 1833-14:2006 specifies a method, using acetic acid, to determine the percentage of acetate, after removal of non-fibrous matter, in textiles made of mixtures of acetate and certain chlorofibres or after-chlorinated chlorofibres.</p>"

40576,IS,,ISO 1833-15:2006,Textiles — Quantitative chemical analysis — Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content),Textiles — Analyse chimique quantitative — Partie 15: Mélanges de jute et de certaines fibres animales (méthode par dosage de l'azote),2006-06-02,1,['59.060.01'],ISO/TC 38,9599,"[6484,6483]",[74879],"['en','fr']",4,"<p>ISO 1833-15:2006 specifies a method, by determining the nitrogen content, to calculate the proportion of each component, after the removal of non-fibrous matter, in textiles made of binary mixtures of jute and animal fibres.</p><p>The animal-fibre component may consist solely of hair or wool, or of any mixtures of t

40577,IS,,ISO 1833-16:2006,Textiles — Quantitative chemical analysis — Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene),Textiles — Analyse chimique quantitative — Partie 16: Mélanges de fibres de polypropylène et de certaines autres fibres (méthode au xylène),2006-06-02,1,['59.060.01'],ISO/TC 38,9599,"[6484,6483]",[73727],"['en','fr']",2,"<p>ISO 1833-16:2006 specifies a method, using xylene, to determine the percentage of polypropylene, after removal of non-fibrous matter, in textiles made of binary mixtures of polypropylene fibres and wool, animal hair, silk, cotton, viscose, cupro, modal, acetate, triacetate, polyamide, polyester, acrylic and glass f

40578,IS,,ISO 1833-17:2006,Textiles — Quantitative chemical analysis — Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid),Textiles — Analyse chimique quantitative — Partie 17: Mélanges de chlorofibres (homopolymères de chlorure de vinyle) et de certaines autres fibres (méthode à l'acide sulfurique),2006-06-02,1,['59.060.01'],ISO/TC 38,9599,"[6484,6483]",[74880],"['en','fr']",3,"<p>ISO 1833-17:2006 specifies a method, using sulfuric acid, to determine the percentage of chlorofibres, after removal of non-fibrous material, in textiles made of binary mixtures of chlorofibres based on homopolymers of vinyl chloride (after-chlor

40579,IS,,ISO 1833-18:2006,Textiles — Quantitative chemical analysis — Part 18: Mixtures of silk and wool or hair (method using sulfuric acid),Textiles — Analyse chimique quantitative — Partie 18: Mélanges de soie et de laine ou poils (méthode à l'acide sulfurique),2006-06-02,1,['59.060.01'],ISO/TC 38,9599,"[6484,6483]",[73730],"['en','fr']",2,"<p>ISO 1833-18:2006 specifies a method, using sulfuric acid, to determine the percentage of silk, after removal of non-fibrous matter, in textiles made of binary mixtures of silk and wool or animal hair.</p>"

73730,IS,,ISO 1833-18:2019,Textiles — Quantitative chemical analysis — Part 18: Mixtures of silk with other protein fibres (method using sulfuric acid),Textiles — Analyse chimique quantitative — Partie 18: Mélanges de soie avec d'autres fibres protéiques (méthode à l'acide sulfurique),2019-04-12,2,['59.060.01'],ISO/TC 38,9599,[40579],[79806],"['en','fr']",3,"<p>This document specifies a method, using sulfuric acid, to determine the mass percentage of silk, after removal of non-fibrous matter, in textiles made of binary mixtures of</p><p>— silk</p><p>with</p><p>— other protein fibres (e.g. wool or animal hair).</p>" 737

6483,IS,,ISO 1833:1977,Textiles — Binary fibre mixtures — Quantitative chemical analysis,Textiles — Mélanges binaires de fibres — Analyse chimique quantitative,1977-12-01,2,['59.060.01'],ISO/TC 38,9599,,"[40565,40580,40907,40574,40568,40575,40569,40561,40576,40562,40577,40563,40578,40570,40564,42996,40571,40557,44340,40572,40579,23622,40573]","['en','fr']",15,"<p>In general, the methods described are based on the selective solution of an individual component. After removal of a component, the insoluble residue is weighed, and the proportion of soluble component is calculated from the loss in mass. - Replaces ISO 1833-1973 as well as Amendment 1 and Addendum 1 to the first edition. It also in

6484,IS,Amd,ISO 1833:1977/Amd 1:1980,Textiles — Binary fibre mixtures — Quantitative chemical analysis — Amendment 1,Textiles — Mélanges binaires de fibres — Analyse chimique quantitative — Amendement 1,1980-09-01,2,['59.060.01'],ISO/TC 38,9599,,"[40565,40580,40907,40574,40568,40575,40569,40561,40576,40562,40577,40563,40578,40570,40564,42996,40571,40557,40572,44340,40579,40573]","['en','fr']",2,

40562,IS,,ISO 1833-2:2006,Textiles — Quantitative chemical analysis — Part 2: Ternary fibre mixtures,Textiles — Analyse chimique quantitative — Partie 2: Mélanges ternaires de fibres,2006-06-02,1,['59.060.01'],ISO/TC 38,9599,"[6484,11109,6483]",[74882],"['en','fr']",14,<p>ISO 1833-2:2006 specifies methods of quantitative chemical analysis of various ternary mixtures of fibres.</p>

42996,IS,,ISO 1833-20:2009,Textiles — Quantitative chemical analysis — Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide),Textiles — Analyse chimique quantitative — Partie 20: Mélanges d'élasthanne et de certaines autres fibres (méthode à la diméthylacétamide),2009-10-09,1,['59.060.01'],ISO/TC 38,9599,"[6484,6483]",[70287],"['en','fr']",3,"<p>ISO 1833-20:2009 specifies a method using dimethylacetamide to determine the</p><p>percentage of elastane, after removal of non-fibrous matter, in textiles made of binary mixtures of certain elastane fibres with cotton, viscose, cupro, modal, polyamide, polyester or wool fibres.</p><p>This method is not applicable wh

40907,IS,,ISO 1833-21:2006,"Textiles — Quantitative chemical analysis — Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone)","Textiles — Analyse chimique quantitative — Partie 21: Mélanges de chlorofibres, certains modacryliques, certains élasthannes, acétates, triacétates et de certaines autres fibres (méthode à la cyclohexanone)",2006-06-02,1,['59.060.01'],ISO/TC 38,9599,"[6484,6483]",[74086],"['en','fr']",5,"<p>ISO 1833-21:2006 specifies a method, using cyclohexanone, to determine the percentage of chlorofibre, modacrylic, elastane, acetate and triacetate, after removal of non-fibrous matter

42995,IS,,ISO 1833-22:2013,Textiles — Quantitative chemical analysis — Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chloride),"Textiles — Analyse chimique quantitative — Partie 22: Mélanges de viscose ou de certains types de cupro, modal ou lyocell et de fibres de lin (méthode à l'acide formique et au chlorure de zinc)",2013-02-19,1,['59.060.01'],ISO/TC 38,9599,,[77643],"['en','fr']",10,"<p>ISO 1833-22:2013 is applicable, after removal of non-fibrous matter, to binary mixtures of viscose or certain types of the current cupro or modal or lyocell fibres with flax fibres.</p><p>If a cupro or modal fibre is found to

54128,IS,,ISO 1833-25:2013,Textiles — Quantitative chemical analysis — Part 25: Mixtures of polyester and certain other fibres (method using trichloroacetic acid and chloroform),Textiles — Analyse chimique quantitative — Partie 25: Mélanges de polyester et de certaines autres fibres (méthode à l'acide trichloracétique et au chloroforme),2013-07-25,1,['59.060.01'],ISO/TC 38,9599,,[78202],"['en','fr']",3,"<p>ISO 1833-25:2013 specifies a method using trichloroacetic acid and chloroform to determine the percentage of polyester fibres after removal of non-fibrous matter, in textiles made of binary mixtures of polyester fibres with other fibres, except one type of aramid (polyamide imide), polyami

56205,IS,,ISO 1833-26:2013,Textiles — Quantitative chemical analysis — Part 26: Mixtures of melamine and cotton or aramide fibres (method using hot formic acid),Textiles — Analyse chimique quantitative — Partie 26: Mélanges de fibres de mélamine et de fibres de coton ou d'aramide (méthode à l'acide formique chaud),2013-02-19,1,['59.060.01'],ISO/TC 38,9599,,[79807],"['en','fr']",2,"<p>ISO 1833-26:2013 specifies a method using hot formic acid to determine the percentage of melamine fibres after removal of non-fibrous matter, in textiles made of binary mixtures of melamine fibres with cotton or aramid fibres.</p>"

40557,IS,,ISO 1833-3:2006,Textiles — Quantitative chemical analysis — Part 3: Mixtures of acetate and certain other fibres (method using acetone),Textiles — Analyse chimique quantitative — Partie 3: Mélanges d'acétate et de certaines autres fibres (méthode à l'acétone),2006-06-02,1,['59.060.01'],ISO/TC 38,9599,"[6484,6483]",[73901],"['en','fr']",2,"<p>ISO 1833-3:2006 specifies a method, using acetone, to determine the percentage of acetate, after removal of non-fibrous matter, in textiles made of binary mixtures of acetate and wool, animal hair, silk, regenerated protein, cotton (scoured, kiered, or bleached), flax, hemp, jute, abaca, alfa, coir, broom, ramie, cupro, viscose, modal, polyamid

73901,IS,,ISO 1833-3:2019,Textiles — Quantitative chemical analysis — Part 3: Mixtures of acetate with certain other fibres (method using acetone),Textiles — Analyse chimique quantitative — Partie 3: Mélanges d'acétate avec certaines autres fibres (méthode à l'acétone),2019-04-12,2,['59.060.01'],ISO/TC 38,9599,[40557],[79800],"['en','fr']",2,"<p>This document specifies a method, using acetone, to determine the mass percentage of acetate, after removal of non-fibrous matter, in textiles made of mixtures of</p><p>— acetate</p><p>with</p><p>— wool, animal hair, silk, regenerated protein, cotton (scoured, kiered, or bleached), flax (or linen), hemp,

40563,IS,,ISO 1833-4:2006,Textiles — Quantitative chemical analysis — Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite),Textiles — Analyse chimique quantitative — Partie 4: Mélanges de certaines fibres protéiniques et de certaines autres fibres (méthode à l'hypochlorite),2006-10-04,1,['59.060.01'],ISO/TC 38,9599,"[6484,6483]",[70173],"['en','fr']",2,"<p>ISO 1833-4:2006 specifies a method, using hypochlorite, to determine the percentage of protein fibre, after removal of non-fibrous matter, in textiles made of binary mixtures of certain non-protein fibres and one protein fibre, as follows: wool, chemically-treated wool, other animal-hair fibres, silk, re

70173,IS,,ISO 1833-4:2017,Textiles — Quantitative chemical analysis — Part 4: Mixtures of certain protein fibres with certain other fibres (method using hypochlorite),Textiles — Analyse chimique quantitative — Partie 4: Mélanges de certaines fibres protéiniques avec certaines autres fibres (méthode à l'hypochlorite),2017-07-26,2,['59.060.01'],ISO/TC 38,9599,[40563],[86273],"['en','fr']",3,"<p>ISO 1833-4:2017 specifies a method, using hypochlorite, to determine the mass percentage of protein fibre, after removal of non-fibrous matter, in textiles made of mixtures of certain non-protein fibres and certain protein fibres, as follows:</p><p>- wool, other animal-hair (such as cashmere, mohai

40565,IS,,ISO 1833-6:2007,Textiles — Quantitative chemical analysis — Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride),"Textiles — Analyse chimique quantitative — Partie 6: Mélanges de viscose ou de certains types de cupro, modal ou lyocell et de fibres de coton (méthode à l'acide formique et au chlorure de zinc)",2007-05-25,1,['59.060.01'],ISO/TC 38,9599,"[6484,6483]",[71107],"['en','fr']",3,"<p>ISO 1833-6:2007 specifies a method, using a mixture of formic acid and zinc chloride, to determine the percentage of cotton, after removal of non-fibrous matter, in textiles made of binary mixtures of viscose or

40568,IS,,ISO 1833-7:2006,Textiles — Quantitative chemical analysis — Part 7: Mixtures of polyamide and certain other fibres (method using formic acid),Textiles — Analyse chimique quantitative — Partie 7: Mélanges de polyamide et de certaines autres fibres (méthode à l'acide formique),2006-06-02,1,['59.060.01'],ISO/TC 38,9599,"[6484,6483]",[70285],"['en','fr']",3,"<p>ISO 1833-7:2006 specifies a method, using formic acid, to determine the percentage of polyamide fibre, after removal of non-fibrous matter, in textiles made of binary mixtures of polyamide and cotton, viscose, cupro, modal, polyester, polypropylene, chlorofibre, acrylic or glass fibre.</p><p>It is also applicable to mixtures wit

40570,IS,,ISO 1833-9:2006,Textiles — Quantitative chemical analysis — Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol),Textiles — Analyse chimique quantitative — Partie 9: Mélanges de fibres d'acétate et de triacétate (méthode à l'alcool benzylique),2006-07-10,1,['59.060.01'],ISO/TC 38,9599,"[6484,6483]",[74876],"['en','fr']",2,"<p>ISO 1833-9:2006 specifies a method, using benzyl alcohol, to determine the percentage of acetate, after removal of non-fibrous matter, in textiles made of binary mixtures of acetate and triacetate fibres.</p>"

31783,IS,,ISO 18333:2002,Pallets for materials handling — Quality of new wooden components for flat pallets,Palettes pour la manutention et le transport de marchandises — Qualité des composants neufs en bois pour palettes plates,2002-12-09,1,['55.180.20'],ISO/TC 51,9599,,[61430],"['en','fr']",7,"<p>ISO 18333:2002 gives guidance on minimum recommended timber quality characteristics. It applies to stringers, stringerboards, blocks and deckboards used for flat wooden pallet assembly.</p><p>The purpose of ISO 18333:2002 is to establish internationally recognized minimum acceptable quality levels for the above-mentioned wooden parts commonly used for the assembly of timber pallets. The properties

31784,IS,,ISO 18334:2003,"Pallets for materials handling — Quality of assembly of new, wooden, flat pallets",Palettes pour la manutention et le transport des marchandises — Qualité de l'assemblage des palettes plates neuves en bois,2003-02-19,1,['55.180.20'],ISO/TC 51,9599,,[52147],"['en','fr']",6,"<p>ISO 18334:2003 gives guidance on the minimum quality criteria concerning the assembly of new wooden pallets. This includes component placement accuracy, fastener schedules and fastener placement, the clinching of fasteners and guidelines for the placement of component characteristics which limit their affect on pallet performance.</p><p>ISO 18334:2003 does not address the safety problems, if an

62210,IS,,ISO 18338:2015,Metallic materials — Torsion test at ambient temperature,Matériaux métalliques — Essai de torsion à température ambiante,2015-09-09,1,['77.040.10'],ISO/TC 164/SC 2,9599,,[83339],"['en','fr']",17,<p>ISO 18338:2015 specifies the method for torsion test at room temperature of metallic materials. The tests are conducted at room temperature to determine torsional properties.</p>

6485,IS,,ISO 1834:1980,Short link chain for lifting purposes — General conditions of acceptance,Chaînes de levage à maillons courts — Conditions générales de réception,1980-09-01,1,['53.020.30'],ISO/TC 111/SC 1,9599,,[6486],"['en','fr']",8,

6487,IS,,ISO 1835:1980,"Short link chain for lifting purposes — Grade M (4), non-calibrated, for chain slings etc.","Chaînes de levage à maillons courts, classe M (4), non calibrées, pour élingues à chaînes, etc.",1980-09-01,1,['53.020.30'],ISO/TC 111/SC 1,9599,,"[74249,6488]","['en','fr']",8,"<p>Specifies the requirements for lifting chains, grade M (4), non-calibrated, for use on cranes, in chain slings and for general lifting purposes. These are electrically welded round steel short link chains, fully heat treated and tested complying with ISO 1834. The range of sizes covered is from 5 to 45 mm. The annex gives a range of temporary additional sizes 6 to 46 mm.</p>"

69575,IS,,ISO 18363-2:2018,"Animal and vegetable fats and oils — Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS — Part 2: Method using slow alkaline transesterification and measurement for 2-MCPD, 3-MCPD and glycidol","Corps gras d'origines animale et végétale — Détermination des esters de chloropropanediols (MCPD) et d'acides gras et des esters de glycidol et d'acides gras par CPG/SM — Partie 2: Méthode par transestérification alcaline lente et mesure pour le 2-MCPD, le 3-MCPD et le glycidol",2018-08-24,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[89082],"['en','fr']",21,"<p>This document specifies a procedure for the parallel determination of glycidol together

69576,IS,,ISO 18363-3:2017,"Animal and vegetable fats and oils — Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS — Part 3: Method using acid transesterification and measurement for 2-MCPD, 3-MCPD and glycidol","Corps gras d'origines animale et végétale — Détermination des esters de chloropropanediols (MCPD) et d'acides gras et des esters de glycidol et d'acides gras par CPG/SM — Partie 3: Méthode par transestérification acide et mesure du 2-MCPD, du 3-MCPD et du glycidol",2017-12-07,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[88577],"['en','fr']",18,"<p>ISO 18363-3:2017 specifies a procedure for the simultaneous determination of 2-MCPD esters (bound 2-MCPD), 3‐M

33429,IS,,ISO 18369-1:2006,"Ophthalmic optics — Contact lenses — Part 1: Vocabulary, classification system and recommendations for labelling specifications","Optique ophtalmique — Lentilles de contact — Partie 1: Vocabulaire, système de classification et recommandations pour l'étiquetage des spécifications",2006-08-03,1,"['11.040.70','01.040.11']",ISO/TC 172/SC 7,9599,"[25343,19493,30614,36999,15446]",[66338],"['en','fr']",48,"<p>ISO 18369-1:2006 identifies and defines the terms applicable to the physical, chemical and optical properties of contact lenses, their manufacture and uses. It provides a vocabulary of terms and, when appropriate, the international symbol and abbreviation associated

46070,IS,Amd,ISO 18369-1:2006/Amd 1:2009,"Ophthalmic optics — Contact lenses — Part 1: Vocabulary, classification system and recommendations for labelling specifications — Amendment 1","Optique ophtalmique — Lentilles de contact — Partie 1: Vocabulaire, système de classification et recommandations pour l'étiquetage des spécifications — Amendement 1",2009-02-09,1,"['11.040.70','01.040.11']",ISO/TC 172/SC 7,9599,,[66338],"['en','fr']",1,

34478,IS,,ISO 18369-2:2006,Ophthalmic optics — Contact lenses — Part 2: Tolerances,Optique ophtalmique — Lentilles de contact — Partie 2: Tolérances,2006-08-03,1,['11.040.70'],ISO/TC 172/SC 7,9599,"[30614,15446]",[57208],"['en','fr']",7,"<p>ISO 18369-2:2006 specifies the tolerance limits of the principal optical and physical parameters of rigid, soft, and rigid scleral contact lenses.</p>"

57208,IS,,ISO 18369-2:2012,Ophthalmic optics — Contact lenses — Part 2: Tolerances,Optique ophtalmique — Lentilles de contact — Partie 2: Tolérances,2012-11-29,2,['11.040.70'],ISO/TC 172/SC 7,9599,[34478],[66339],"['en','fr']",6,"<p>ISO 18369-2:2012 specifies the tolerance limits of the principal optical and physical parameters of rigid, soft and rigid scleral contact lenses.</p>"

34479,IS,,ISO 18369-3:2006,Ophthalmic optics — Contact lenses — Part 3: Measurement methods,Optique ophtalmique — Lentilles de contact — Partie 3: Méthodes de mesure,2006-08-03,1,['11.040.70'],ISO/TC 172/SC 7,9599,"[18389,27467,17021,33790,17025,17022,15901,17023,25850,18395]",[66340],"['en','fr']",37,"<p>ISO 18369-3:2006 specifies the methods for measuring the physical and optical properties of contact lenses specified in ISO 18369-2, i.e. radius of curvature, back vertex power, diameter, thickness, inspection of edges, inclusions and surface imperfections, and determination of spectral and luminous transmittances. ISO 18369-3:2006 also specifies the equilibrating solution, standard saline

34480,IS,,ISO 18369-4:2006,Ophthalmic optics — Contact lenses — Part 4: Physicochemical properties of contact lens materials,Optique ophtalmique — Lentilles de contact — Partie 4: Propriétés physicochimiques des matériaux des lentilles de contact,2006-08-03,1,['11.040.70'],ISO/TC 172/SC 7,9599,"[17797,18390,18391,17796,2861,26921]",[66341],"['en','fr']",30,"<p>ISO 18369-4:2006 specifies the methods of testing the physicochemical properties of contact lens materials. These are extraction, rigid lens flexure and breakage, oxygen permeability, refractive index and water content.</p>"

6490,IS,,ISO 1837:1973,Lifting hooks — Nomenclature,Crochets de levage — Nomenclature,1973-02-01,1,"['53.020.30','01.040.53']",ISO/TC 111/SC 3,9599,,"[37599,26370]","['en','fr']",1,<p>Specifies the nomenclature and the symbolization of hooks of all types used on lifting appliances of all kinds. A table shows hooks according to the attachment and shape.</p>

6491,IS,,ISO 1838:1975,Fresh pineapples — Guide to storage and transport,Ananas frais — Guide pour l'entreposage et le transport,1975-12-01,1,['67.080.10'],ISO/TC 34,9599,,[6492],"['en','fr']",3,

62322,IS,,ISO 18383:2015,Photography — Digital cameras — Specification guideline,Photographie — Caméras numériques — Ligne directrice de spécification,2015-08-25,1,['37.040.10'],ISO/TC 42,9599,,[86876],['en'],61,"<p>ISO 18383:2015 identifies a set of features that describes digital still cameras (DSCs), and it specifies their definitions, measurement methods, and presentation methods. This International Standard applies to DSCs designed and produced for and promoted to general consumers and need not be applied to those DSCs designed and produced to meet individual and special specifications agreed upon by particular business or industrial users and the manufacturer.</p><p>The presentation me

6494,IS,,ISO 1839-1:1975,Withdrawal of ISO 1839/1-1975,Annulation de l'ISO 1839/1-1975,1975-12-01,1,['67.140.10'],ISO/TC 34,9599,,[6493],"['en','fr']",2,

6495,IS,,ISO 1839-2:1976,Withdrawal of ISO 1839/2-1976,Annulation de l'ISO 1839/2-1976,1976-10-01,1,['67.140.10'],ISO/TC 34,9599,,[6493],"['en','fr']",3,

52271,IS,,ISO 18393-1:2012,Thermal insulation products — Determination of ageing by settlement — Part 1: Blown loose-fill insulation for ventilated attics,Produits isolants thermiques — Détermination du tassement après vieillissement — Partie 1: Isolant en vrac soufflé pour combles ventilés,2012-07-04,1,['91.120.10'],ISO/TC 163/SC 1,9599,,"[79312,67576]","['en','fr']",4,<p>ISO 18393-1:2012 specifies a test method for the determination of settlement of blown loose-fill insulation applied horizontally in ventilated attics.</p>

62362,IS,,ISO 18397:2016,Dentistry — Powered scaler,Médecine bucco-dentaire — Instruments pour le détartrage,2016-01-15,1,['11.060.25'],ISO/TC 106/SC 4,9599,"[28387,36206]",[83681],"['en','fr']",17,"<p>ISO 18397:2016 specifies requirements and test methods for air-powered and electrical-powered scaler handpieces and scaler tips, including piezo, ferrostrictive and magnetostrictive type ultrasonic scalers, operated as stand-alone items or connected to dental units, for use on patients. It also contains specifications on manufacturers' instructions, marking and packaging.</p>"

62412,IS,,ISO 18407:2018,Simplified design of prestressed concrete tanks for potable water,Conception simplifiée du réservoir pour l'eau potable en béton pré-armé,2018-05-24,1,['91.080.40'],ISO/TC 71/SC 5,9599,,[90066],['en'],174,"<p>This document provides guidelines for the planning, design and construction of a cylindrical tank constructed on the ground with prestressed concrete (PC) for use with potable water tank.</p><p>This document is applicable to PC tanks for potable water with a capacity of 30 000 m³ or less and the diameter-to-height ratio (<i>D</i>/<i>H</i>) from 1,0 to 3,0.</p><p>NOTE When designing and constructing a tank not covered by this document (reinforced

6497,IS,,ISO 1841:1981,Meat and meat products — Determination of chloride content (Reference method),Viandes et produits à base de viande — Détermination de la teneur en chlorures (Méthode de référence),1981-02-01,1,['67.120.10'],ISO/TC 34/SC 6,9599,,[6498],"['en','fr']",3,

36916,IS,,ISO 18412:2005,Water quality — Determination of chromium(VI) — Photometric method for weakly contaminated water,Qualité de l'eau — Dosage du chrome(VI) — Méthode photométrique pour des eaux faiblement contaminées,2005-06-15,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[85399],"['en','fr']",6,"<p>ISO 18412:2005 specifies a method for the determination of chromium(VI) in drinking water in mass concentrations between 2 micrograms per litre and 50 micrograms per litre. For the determination of higher concentrations, the sample is diluted prior to analysis. The method may also be applied to weakly polluted ground and surface water, provided the matrix does not contain interfering reducing agen

31795,IS,,ISO 18413:2002,"Hydraulic fluid power — Cleanliness of parts and components — Inspection document and principles related to contaminant collection, analysis and data reporting",Transmissions hydrauliques — Propreté des pièces et composants — Documents de contrôle et principes d'extraction et d'analyse des polluants et d'expression des résultats,2002-10-10,1,['23.100.60'],ISO/TC 131/SC 6,9599,,[54468],"['en','fr']",28,"<p>ISO 18413 specifies the content of an inspection document that includes both the cleanliness requirement for the specified part or component and the inspection method to be used for evaluating its cleanliness level. The cleanliness requirement and inspection metho

38684,IS,,ISO 18414:2006,Acceptance sampling procedures by attributes — Accept-zero sampling system based on credit principle for controlling outgoing quality,Procédures d'échantillonnage par attributs pour acceptation — Système d'échantillonnage de tolérance zéro-défaut basé sur le principe de crédit pour le contrôle de la qualité à la sortie,2006-01-20,1,['03.120.30'],ISO/TC 69/SC 5,9599,,[64626],['en'],9,"<p>ISO 18414:2006 specifies a system of single sampling schemes for lot-by-lot inspection by attributes. All the sampling plans of the system are of accept-zero form, i.e. no lot is accepted if the sample from it contains one or more nonconforming items. The schemes depend on a suitably-

38686,IS,,ISO 18415:2007,Cosmetics — Microbiology — Detection of specified and non-specified microorganisms,Cosmétiques — Microbiologie — Détection des micro-organismes spécifiés et non spécifiés,2007-08-28,1,['07.100.40'],ISO/TC 217,9599,,[72238],"['en','fr','ru']",18,"<p>ISO 18415:2007 gives general guidelines for the detection and identification of specified microorganisms in cosmetic products as well as for the detection and identification of other kinds of aerobic mesophilic non-specified microorganisms in cosmetic products.</p><p>Microorganisms considered as specified in this International Standard might differ from country to country according to national practices or regulations. Mos

38687,IS,,ISO 18416:2007,Cosmetics — Microbiology — Detection of Candida albicans,Cosmétiques — Microbiologie — Détection de Candida albicans,2007-07-04,1,['07.100.40'],ISO/TC 217,9599,,[68314],"['en','fr','ru']",16,"<p>ISO 18416:2007 gives general guidelines for the detection and identification of the specified microorganism <i>Candida albicans</i> in cosmetic products. Microorganisms considered as specified in this International Standard might differ from country to country according to national practices or regulations.</p><p>The method described in ISO 18416:2007 is based on the detection of <i>Candida albicans</i> in a non-selective liquid medium (enrichment broth), followed by isolatio

62433,IS,,ISO 18418-1:2014,Gasoline engines — Medium pressure liquid fuel supply connections — Part 1: 60° female cone connectors,Moteurs à essence — Connexions pour des lignes de combustible liquide à moyenne pression — Partie 1: Raccords à cônes femelle de 60°,2014-11-13,1,['43.060.40'],ISO/TC 22/SC 34,9599,,[69503],['en'],5,"<p>ISO 18418-1:2014 specifies the dimensional requirements of medium-pressure pipe end-connections for gasoline (spark-ignition) engine fuel injection equipment.</p><p>It is applicable to externally threaded end-connections having a 60° female cone, as well as to the pipe end assemblies of medium-pressure fuel injection pipes with outside diameters of up to and includ

69503,IS,,ISO 18418-1:2016,Gasoline engines — Medium pressure liquid fuel supply connections — Part 1: 60° female cone connectors,Moteurs à essence — Connexions pour des lignes de combustible liquide à moyenne pression — Partie 1: Raccords à cônes femelle de 60°,2016-11-21,2,['43.060.40'],ISO/TC 22/SC 34,9599,[62433],[88247],['en'],4,"<p>ISO 18418-1:2016 specifies the dimensional requirements of medium-pressure pipe end-connections for gasoline (spark ignition) engine fuel injection equipment.</p><p>It is applicable to externally threaded end-connections having a 60° female cone (see Figure 1), as well as to the pipe end assemblies of medium-pressure fuel injection pipes with outside diamete

62434,IS,,ISO 18418-2:2014,Gasoline engines — Medium pressure liquid fuel supply connections — Part 2: Pipe assemblies,Moteurs à essence — Connexions pour des lignes de combustible liquide à moyenne pression — Partie 2: Lignes assemblées,2014-11-13,1,['43.060.40'],ISO/TC 22/SC 34,9599,,[80852],['en'],7,<p>ISO 18418-2:2014 specifies dimensions and requirements for medium-pressure fuel pipe assemblies and assembled pipe sets made of seamless stainless steel tubing to be used with 60° female cone connectors on gasoline (spark-ignition) engines.</p>

6499,IS,,ISO 1842:1975,Fruit and vegetable products — Determination of pH,Produits dérivés des fruits et légumes — Mesurage du pH,1975-12-01,1,['67.080.01'],ISO/TC 34/SC 3,9599,,[6500],"['en','fr']",2,

62438,IS,,ISO 18421:2013,Ships and marine technology — Inland navigation vessels — Lifebuoy housings,Navires et technologie maritime — Bateaux de navigation intérieure — Coffres à bouée de sauvetage,2013-08-08,1,['47.060'],ISO/TC 8/SC 7,9599,,[68672],['en'],5,<p>ISO 18421:2013 stipulates the construction and dimensions of housing for lifebuoys.</p><p>The housing serves to encase a lifebuoy to protect it against deterioration from the elements and against vandalism.</p>

62447,IS,,ISO 18423:2013,Space data and information transfer systems — Pseudo-Noise (PN) Ranging Systems,Systèmes de transfert des informations et données spatiales — Systèmes de mesure du pseudo-bruit,2013-05-29,1,['49.140'],ISO/TC 20/SC 13,9599,,[67086],['en'],37,"<p>ISO 18423:2013 provides a Recommendation for Space Data System Standards in the area of transparent and regenerative Pseudo-Noise (PN) ranging systems. The PN ranging system is used to measure the round-trip light time between a ground station and a spacecraft. Regenerative ranging is primarily relevant for low Signal-to-Noise Ratio (SNR) cases like those seen in deep space missions; transparent ranging is more suitable for hi

33477,IS,,ISO 18436-1:2004,Condition monitoring and diagnostics of machines — Requirements for training and certification of personnel — Part 1: Requirements for certifying bodies and the certification process,Surveillance et diagnostic d'état des machines — Exigences relatives à la formation et à la certification du personnel — Partie 1: Exigences relatives aux organismes de certification et au processus de certification,2004-10-01,1,"['03.100.30','17.160']",ISO/TC 108/SC 5,9599,,[52259],"['en','fr']",12,"<p>ISO 18436-1:2004 defines the requirements for bodies operating certification systems for personnel who perform machinery condition monitoring, identify machine faults, and recommend cor

44215,IS,Cor,ISO 18436-1:2004/Cor 1:2006,Condition monitoring and diagnostics of machines — Requirements for training and certification of personnel — Part 1: Requirements for certifying bodies and the certification process — Technical Corrigendum 1,Surveillance et diagnostic d'état des machines — Exigences relatives à la formation et à la certification du personnel — Partie 1: Exigences relatives aux organismes de certification et au processus de certification — Rectificatif technique 1,2006-04-07,1,"['03.100.30','17.160']",ISO/TC 108/SC 5,9599,,[52259],['en'],1,

52259,IS,,ISO 18436-1:2012,Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 1: Requirements for assessment bodies and the assessment process,Surveillance et diagnostic d'état des machines — Exigences relatives à la qualification et à l'évaluation du personnel — Partie 1: Exigences relatives aux organismes d'évaluation et au mode opératoire d'évaluation,2012-11-13,2,"['03.100.30','17.160']",ISO/TC 108/SC 5,9599,"[33477,44215]","[64258,67515]","['en','fr']",15,"<p>ISO 18436-1:2012 specifies requirements for persons and organizations ('assessment body') operating conformity assessment systems for personnel who perform machinery

33791,IS,,ISO 18436-2:2003,Condition monitoring and diagnostics of machines — Requirements for training and certification of personnel — Part 2: Vibration condition monitoring and diagnostics,Surveillance et diagnostic d'état des machines — Exigences relatives à la formation et à la certification du personnel — Partie 2: Surveillance des vibrations et diagnostic d'état des machines,2003-11-07,1,"['03.100.30','17.160']",ISO/TC 108/SC 5,9599,,[50447],"['en','fr']",15,<p>ISO 18436-2:2003 specifies the general requirements for vibration analysis personnel who perform machinery condition monitoring and diagnostics of machines. Certification to this standard will provide recognition of the qualif

37396,IS,,ISO 18436-3:2008,Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 3: Requirements for training bodies and the training process,Surveillance et diagnostic d'état des machines — Exigences relatives à la qualification et à l'évaluation du personnel — Partie 3: Exigences relatives aux organismes de formation et au processus de formation,2008-02-11,1,"['03.100.30','17.160']",ISO/TC 108/SC 5,9599,,[61554],"['en','fr']",11,"<p>ISO 18436-3:2008 defines the requirements for bodies operating training programmes for personnel who perform machinery condition monitoring, identify machine faults, and recommend corrective action.

52392,IS,Amd,ISO 18436-3:2008/Amd 1:2009,Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 3: Requirements for training bodies and the training process — Amendment 1,Surveillance et diagnostic d'état des machines — Exigences relatives à la qualification et à l'évaluation du personnel — Partie 3: Exigences relatives aux organismes de formation et au processus de formation — Amendement 1,2009-01-12,1,"['03.100.30','17.160']",ISO/TC 108/SC 5,9599,,[61554],"['en','fr']",1,

61554,IS,,ISO 18436-3:2012,Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 3: Requirements for training bodies and the training process,Surveillance et diagnostic d'état des machines — Exigences relatives à la qualification et à l'évaluation du personnel — Partie 3: Exigences relatives aux organismes de formation et au processus de formation,2012-11-05,2,"['03.100.30','17.160']",ISO/TC 108/SC 5,9599,"[52392,37396]",[88263],"['en','fr']",11,"<p>ISO 18436-3:2012 defines the requirements for bodies operating training programmes for personnel who perform machinery condition monitoring, identify machine faults, and recommend cor

37395,IS,,ISO 18436-4:2008,Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 4: Field lubricant analysis,Surveillance et diagnostic d'état des machines — Exigences relatives à la qualification et à l'évaluation du personnel — Partie 4: Analyse de la lubrification sur le terrain,2008-10-20,1,"['03.100.30','17.160']",ISO/TC 108/SC 5,9599,,[61414],['en'],16,<p>ISO 18436-4:2008 specifies the requirements for qualification and assessment of personnel who perform machinery condition monitoring and diagnostics using field lubricant analysis. A certificate or declaration of conformity to ISO 18436-4:2008 will provide recognition of t

41649,IS,,ISO 18436-6:2008,Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 6: Acoustic emission,Surveillance et diagnostic d'état des machines — Exigences relatives à la qualification et à l'évaluation du personnel — Partie 6: Émission acoustique,2008-10-20,1,"['03.100.30','17.160']",ISO/TC 108/SC 5,9599,,[61418],['en'],11,<p>ISO 18436-6:2008 specifies the requirements for qualification and assessment of personnel who perform machinery condition monitoring and diagnostics using acoustic emission. A certificate or declaration of conformity to ISO 18436-6:2008 will provide recognition of the qualifications and competence of i

61418,IS,,ISO 18436-6:2014,Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 6: Acoustic emission,Surveillance et diagnostic d'état des machines — Exigences relatives à la qualification et à l'évaluation du personnel — Partie 6: Émission acoustique,2014-02-10,2,"['03.100.30','17.160']",ISO/TC 108/SC 5,9599,[41649],[79505],"['en','fr']",11,<p>ISO 18436-6:2014 specifies the requirements for qualification and assessment of personnel who perform machinery condition monitoring and diagnostics using acoustic emission.</p><p>A certificate or declaration of conformity to ISO 18436-6:2014 will provide recognition of the qualifications

34956,IS,,ISO 18436-7:2008,Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 7: Thermography,Surveillance et diagnostic d'état des machines — Exigences relatives à la qualification et à l'évaluation du personnel — Partie 7: Thermographie,2008-10-20,1,"['03.100.30','17.160']",ISO/TC 108/SC 5,9599,,[61417],"['en','fr']",17,<p>ISO 18436-7:2008 specifies the requirements for qualification and assessment of personnel who perform machinery condition monitoring and diagnostics using infrared thermography. A certificate or declaration of conformity to ISO 18436-7:2008 will provide recognition of the qualifications and competence of i

62455,IS,,ISO 18440:2013,Space data and information transfer systems — Space Link Extension — Internet Protocol for Transfer Services,Systèmes de transfert des informations et données spatiales — Extension de liaisons spatiales — Protocole Internet pour services de transfert,2013-05-29,1,['49.140'],ISO/TC 20/SC 13,9599,,[70702],['en'],73,"<p>The Space Link Extension (SLE) Reference Model identifies a set of SLE Transfer Services that enable missions to send forward space link data units to a spacecraft and to receive return space link data units from a spacecraft. A subset of these services is specified by the SLE Transfer Service Recommended Standards. The SLE Transfer Service Recommended S

62456,IS,,ISO 18441:2013,Space data and information transfer systems — Space Link Extension — Application Program Interface for Transfer Services — Core Specification,Systèmes de transfert des informations et données spatiales — Extension de liaisons spatiales — Interface du programme d'application pour les services de transfert — Spécification de base,2013-05-29,1,['49.140'],ISO/TC 20/SC 13,9599,,[70703],['en'],371,"<p>ISO 18441:2013 defines a C++ Application Program Interface (API) for CCSDS Space Link Extension (SLE) Transfer Services, which is independent of any specific technology used for communications between an SLE service user and an SLE service provider.</p><p>ISO 18441:2013 defi

70703,IS,,ISO 18441:2016,Space data and information transfer systems — Space link extension — Application program interface for transfer services — Core specification,Systèmes de transfert des informations et données spatiales — Extension de liaisons spatiales — Interface du programme d'application pour les services de transfert — Spécification de base,2016-11-03,2,['49.140'],ISO/TC 20/SC 13,9599,[62456],[74560],['en'],368,"<p>ISO 18441:2016 defines the Application Program Interface in terms of:</p><p>a) the components that provide the services of the API;</p><p>b) the functionality provided by each of the components;</p><p>c) the interfaces provided by each of the components; and

62457,IS,,ISO 18442:2013,Space data and information transfer systems — Space Link Extension — Application Program Interface for Return All Frames Service,Systèmes de transfert des informations et données spatiales — Extension de liaisons spatiales — Interface du programme d'application pour service de retour par tout réseau,2013-05-29,1,['49.140'],ISO/TC 20/SC 13,9599,,[70704],['en'],66,<p>ISO 18442:2013 specifies extensions to the API needed for support of the Return All Frames (RAF) service defined in CCSDS 911.1-B-2.</p><p>ISO 18442:2013 defines extensions to the SLE API in terms of:</p><ul><li>the RAF-specific functionality provided by API components;</li><li>the RAF-specific interfaces

62458,IS,,ISO 18443:2013,Space data and information transfer systems — Space Link Extension — Application Program Interface for Return Channel Frames Service,Systémes de transfert des informations et données spatiales — Extension de liaisons spatiales — Interface du programme d'application pour service de réseau pour liaison retour,2013-05-29,1,['49.140'],ISO/TC 20/SC 13,9599,,[70705],['en'],67,<p>ISO 18443:2013 specifies extensions to the API needed for support of the Return Channel Frames (RCF) service defined in CCSDS 911.2-B-1.</p><p>ISO 18443:2013 defines extensions to the SLE API in terms of:</p><ul><li>the RCF-specific functionality provided by API components;</li><li>the RCF-specific

62459,IS,,ISO 18444:2013,Space data and information transfer systems — Space Link Extension — Application Program Interface for Return Operational Control Fields Service,Systèmes de transfert des informations et données spatiales — Extension de liaisons spatiales — Interface du programme d'application pour service des champs de contrôle de retour opérationnel,2013-05-29,1,['49.140'],ISO/TC 20/SC 13,9599,,[70706],['en'],76,<p>ISO 18444:2013 specifies extensions to the API needed for support of the Return Operational Control Fields (ROCF) service defined in CSDS 911.5-B-1.</p><p>ISO 18444:2013 defines extensions to the SLE API in terms of:</p><ul><li>the ROCF-specific functionality provided by

62460,IS,,ISO 18445:2013,Space data and information transfer systems — Space Link Extension — Application Program Interface for the Forward CLTU Service,Systèmes de transfert des informations et données spatiales — Extension de liaisons spatiales — Interface du programme d'application pour le service de l'unité de transmission pour la liaison d'envoi de télécommande (CLTU),2013-05-29,1,['49.140'],ISO/TC 20/SC 13,9599,,[70707],['en'],97,<p>ISO 18445:2013 specifies extensions to the API needed for support of the Command Link Transmission Unit (CLTU) service defined in CCSDS 912.1-B-2.</p><p>ISO 18445:2013 defines extensions to the SLE API in terms of:</p><ul><li>the CLTU-specific functionality

62461,IS,,ISO 18446:2013,Space data and information transfer systems — Space Link Extension — Application Program Interface for the Forward Space Packet Service,Systèmes de transfert des informations et données spatiales — Extension de liaisons spatiales — Interface du programme d'application pour le service d'envoi de données spatiales par paquets,2013-05-29,1,['49.140'],ISO/TC 20/SC 13,9599,,[70708],['en'],154,<p>ISO 18446:2013 specifies extensions to the API needed for support of the Forward Space Packet Service defined in CCSDS 912.3-B-1.</p><p>ISO 18446:2013 defines extensions to the SLE API in terms of:</p><ul><li>the FSP-specific functionality provided by API components;</li><li>the F

62468,IS,,ISO 18449:2021,Green tea — Vocabulary,Thé vert — Vocabulaire,2021-05-18,1,"['67.140.10','01.040.67']",ISO/TC 34/SC 8,9599,,[87443],['en'],12,<p>This document defines terms for classifying and assessing green tea for commerce.</p>

62478,IS,,ISO 18451-1:2015,"Pigments, dyestuffs and extenders — Terminology — Part 1: General terms","Pigments, colorants et matières de charge — Terminologie — Partie 1: Termes généraux",2015-11-03,1,"['01.040.87','87.060.10']",ISO/TC 256,9599,,[74761],"['en','fr']",24,"<p>ISO 18451-1:2015 defines terms that are used in the field of pigments, dyestuffs and extenders.</p><p>For some terms, reference is made to ISO 4618 in which also terms and definitions for colourants are given, relating to their use in coating materials.</p><p>In addition to terms in English and French (two of the three official ISO languages), this part of ISO 18451 gives the equivalent terms in German; these are publishe

62479,IS,,ISO 18451-2:2015,"Pigments, dyestuffs and extenders — Terminology — Part 2: Classification of colouring materials according to colouristic and chemical aspects","Pigments, colorants et matières de charge — Terminologie — Partie 2: Classification des matières colorantes en fonction de leurs aspects colorimétriques et chimiques",2015-11-03,1,['87.060.10'],ISO/TC 256,9599,,[74762],"['en','fr']",16,"<p>ISO 18451-2:2015 applies for the industry producing colouring materials and the consumer who uses the products of this industry. In this part of ISO 18451, the colouring materials are classified in accordance with colouristic and chemical aspects.</p><p>Some dyestuffs for use in the cera

31800,IS,,ISO 18454:2001,Footwear — Standard atmospheres for conditioning and testing of footwear and components for footwear,Chaussures — Atmosphères normales de conditionnement et d'essai des chaussures et de leurs éléments constitutifs,2001-12-13,1,['61.060'],ISO/TC 216,9599,,[63229],"['en','fr']",3,

35047,IS,,ISO 18472:2006,Sterilization of health care products — Biological and chemical indicators — Test equipment,Stérilisation des produits de santé — Indicateurs biologiques et chimiques — Appareillage d'essai,2006-05-19,1,['11.080.01'],ISO/TC 198,9599,"[19161,21775]",[66450],"['en','fr','ru']",28,"<p>ISO 18472:2006 specifies the requirements for test equipment to be used to test chemical and biological indicators for steam, ethylene oxide, dry heat and vaporized hydrogen peroxide processes for conformity to the requirements given in ISO 11140-1 for chemical indicators, or the requirements given in the ISO 11138 series for biological indicators. ISO 18472:2006 also provides informative

62584,IS,,ISO 18487-1:2017,Aerospace series — Titanium tube for 35 MPa operating pressure — Part 1: Inch series,Série aérospatiale — Tubes en titane — Pression de service : 35 MPa — Partie 1: Série en inches,2017-04-25,1,['49.080'],ISO/TC 20/SC 10,9599,,[90955],['en'],13,"<p>ISO 18487-1:2017 is applicable to seamless tubing of circular cross-section made from titanium alloy and intended for use primarily in systems with system operating pressure of 35 MPa (5 080 psi) (Pressure Class J), but usage is not limited to such applications.</p>"

62592,IS,,ISO 18488:2015,Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method,Matériaux polyéthylène (PE) pour systèmes de canalisations — Détermination du module d'écrouissage en relation avec la propagation lente de fissures — Méthode d'essai,2015-08-20,1,"['23.040.45','23.040.20']",ISO/TC 138/SC 5,9599,,[88456],['en'],10,"<p>ISO 18488:2015 specifies a method for the determination of the strain hardening modulus which is used as a measure for the resistance to slow crack growth of polyethylene.</p><p>The strain hardening modulus is obtained from stress-strain curves on compression moulded samples. This Int

62605,IS,,ISO 18490:2015,Non-destructive testing — Evaluation of vision acuity of NDT personnel,Essais non destructifs — Évaluation de l'acuité visuelle du personnel END,2015-05-29,1,"['03.100.30','19.100']",ISO/TC 135/SC 7,9599,,[88640],"['en','fr']",8,"<p>ISO 18490:2015 specifies the form of the optotype, the quality requirements for the chart, the test procedure, and the acceptance level for near vision acuity of NDT personnel. It also addresses the qualification requirements for personnel permitted to carry out the test.</p><p>ISO 18490:2015 only addresses near vision acuity under defined conditions similar to those encountered during routine NDT inspection. It does not address an indivi

4032,IS,,ISO 185:1988,Grey cast iron — Classification,Fontes grises de moulage — Classification,1988-12-29,1,['77.080.10'],ISO/TC 25,9599,,[35128],"['en','fr']",11,"<p>Cancels and replaces the ISO Recommendation R 185:1961. Applies only to grey cast iron, cast in sand moulds or moulds of comparable thermal diffusivity. The classification comprises six grades based on the tensile properties of test pieces machined from separately cast test samples. Cast-on samples may be used in cases where greater castings are to be tested. Annex A gives a classification as a function of hardness.</p>"

35128,IS,,ISO 185:2005,Grey cast irons — Classification,Fontes à graphite lamellaire — Classification,2005-08-26,2,['77.080.10'],ISO/TC 25,9599,[4032],[67753],"['en','fr']",21,"<p>ISO 185:2005 specifies the properties of unalloyed and low-alloyed grey cast irons used for castings, which have been manufactured in sand moulds or in moulds with comparable thermal behaviour.</p><p>ISO 185:2005 specifies the characterizing properties of grey cast iron by either the tensile strength of separately cast samples, or if agreed by the manufacturer and the purchaser, of cast-on samples or samples cut from a casting, or if agreed between the manufacturer and the purchaser, the hardness of the material me

67753,IS,,ISO 185:2019,Grey cast irons — Classification,Fontes à graphite lamellaire — Classification,2019-07-29,3,['77.080.10'],ISO/TC 25,9599,[35128],[80283],['en'],26,"<p>This document specifies the properties of unalloyed and low-alloyed grey cast irons used for castings that have been manufactured in sand moulds or in moulds with comparable thermal behaviour.</p><p>This document specifies the characterizing properties of grey cast irons by any of the following:</p><p>a) the tensile strength of cast samples;</p><p>b) if agreed by the manufacturer and the purchaser, the tensile strength of samples cut from a casting;</p><p>c) if agreed between the manufacturer and the purchaser,

31812,IS,,ISO 18513:2003,Tourism services — Hotels and other types of tourism accommodation — Terminology,Services touristiques - Hôtels et autres types d'hébergements touristiques - Terminologie,2003-10-08,1,"['01.040.03','03.080.30']",ISO/TC 228,9599,,[77685],"['en','fr']",22,<p>ISO 18513:2003 defines terms used in the tourism industry in relation to the various types of tourism accommodation and other related services.</p>

2041,IS,,ISO 18515:2007,Carbonaceous materials for the production of aluminium — Cathode blocks and baked anodes — Determination of compressive strength,Produits carbonés utilisés pour la production de l'aluminium — Blocs cathodiques et anodes cuites — Détermination de la résistance à la compression,2007-03-06,1,['71.100.10'],ISO/TC 226,9599,,[63049],['en'],4,"<p>ISO 18515:2007 specifies a method to determine the compressive strength of carbonaceous and graphite materials (solids), for the production of aluminium, at room temperature.</p>"

38723,IS,,ISO 18516:2006,Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Determination of lateral resolution,Analyse chimique des surfaces — Spectroscopie d'électrons Auger et spectroscopie de photoélectrons de rayons X — Détermination de la résolution latérale,2006-10-19,1,['71.040.40'],ISO/TC 201/SC 2,9599,,[63863],"['en','fr']",24,"<p>ISO 18516:2006 describes three methods for measuring the lateral resolution achievable in Auger electron spectrometers and X-ray photoelectron spectrometers under defined settings. The straight-edge method is suitable for instruments where the lateral resolution is expected to be larger than 1 micrometre. The gr

40321,IS,,ISO 18517:2005,"Rubber, vulcanized or thermoplastic — Hardness testing — Introduction and guide",Caoutchouc vulcanisé ou thermoplastique — Essai de dureté — Introduction et guide,2005-07-18,1,['83.060'],ISO/TC 45/SC 2,9599,,[65923],"['en','fr']",5,<p>ISO 18517:2005 provides guidance on the determination of the hardness of vulcanized and thermoplastic rubbers.</p><p>It is intended to provide an understanding of the significance of hardness as a material property and to assist in the selection of an appropriate test method.</p>

65923,IS,,ISO 18517:2015,"Rubber, vulcanized or thermoplastic — Hardness testing — Introduction and guide",Caoutchouc vulcanisé ou thermoplastique — Essai de dureté — Introduction et guide,2015-04-13,2,['83.060'],ISO/TC 45/SC 2,9599,[40321],[74966],"['en','fr']",5,<p>ISO 18517:2015 provides guidance on the determination of the hardness of vulcanized and thermoplastic rubbers.</p><p>It is intended to provide an understanding of the significance of hardness as a material property and to assist in the selection of an appropriate test method.</p>

6519,IS,,ISO 1853:1975,Conducting and antistatic rubbers — Measurement of resistivity,Élastomères conducteurs et anti-électrostatiques — Mesurage de la résistivité,1975-01-01,1,['83.060'],ISO/TC 45/SC 2,9599,,[6520],"['en','fr']",4,

6520,IS,,ISO 1853:1998,"Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity",Caoutchoucs vulcanisés ou thermoplastiques conducteurs et dissipants — Mesurage de la résistivité,1998-02-26,2,['83.060'],ISO/TC 45/SC 2,9599,[6519],[53024],"['en','fr']",5,

53024,IS,,ISO 1853:2011,"Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity",Caoutchoucs vulcanisés ou thermoplastiques conducteurs et dissipants — Mesurage de la résistivité,2011-08-02,3,['83.060'],ISO/TC 45/SC 2,9599,[6520],[72776],"['en','ru']",10,"<p>ISO 1853:2011 specifies the requirements for the laboratory testing of the volume resistivity of specially prepared test pieces of vulcanized or thermoplastic rubber compounds rendered conducting or dissipative by the inclusion of carbon black or ionizable materials. The tests are suitable for materials with a resistivity of less than about 10⁸ ohm metres.</p><p>Method 1 is the preferred m

6521,IS,,ISO 1854:1972,Whey cheese — Determination of fat content (Reference method),Fromage de sérum — Détermination de la teneur en matière grasse (Méthode de référence),1972-12-01,1,['67.100.30'],ISO/TC 34/SC 5,9599,,[6522],"['en','fr']",3,

6522,IS,,ISO 1854:1987,Whey cheese — Determination of fat content — Gravimetric method (Reference method),Fromage de sérum — Détermination de la teneur en matière grasse — Méthode gravimétrique (Méthode de référence),1987-06-25,2,['67.100.30'],ISO/TC 34/SC 5,9599,[6521],[27799],"['en','fr']",8,

27799,IS,,ISO 1854:1999,Whey cheese — Determination of fat content — Gravimetric method (Reference method),Fromage de sérum — Détermination de la teneur en matière grasse — Méthode gravimétrique (Méthode de référence),1999-10-14,3,['67.100.30'],ISO/TC 34/SC 5,9599,[6522],[51012],"['en','fr']",14,

51012,IS,,ISO 1854:2008,Whey cheese — Determination of fat content — Gravimetric method (Reference method),Fromage de sérum — Détermination de la teneur en matière grasse — Méthode gravimétrique (Méthode de référence),2008-10-02,4,['67.100.30'],ISO/TC 34/SC 5,9599,[27799],[75226],"['en','fr']",14,<p>ISO 1854¦IDF 59:2008 specifies the reference method for the determination of fat content of whey cheese.</p><p>The method is not applicable to products which do not dissolve completely in ammonia solution or which contain free fatty acids in significant quantities.</p>