Withdrawn and superseded ISO standards — page 57 of 246

32188,IS,,ISO 16322-2:2005,Textiles — Determination of spirality after laundering — Part 2: Woven and knitted fabrics,Textiles — Détermination du vrillage après lavage — Partie 2: Étoffes tissées ou tricotées,2005-06-13,1,['59.080.01'],ISO/TC 38/SC 2,9599,,[78781],"['en','fr']",13,"<p>ISO 16322-2:2005 specifies three procedures (diagonal marking, inverted-T marking and mock-garment marking) to measure the spirality or torque of woven and knitted fabrics after laundering. </p><p>The results obtained from different procedures may not be comparable.</p><p>ISO 16322-2:2005 is not intended to measure the spirality of fabrics as manufactured, but rather the spirality after laundering.</p><p>Note t

46119,IS,Cor,ISO 16322-2:2005/Cor 1:2007,Textiles — Determination of spirality after laundering — Part 2: Woven and knitted fabrics — Technical Corrigendum 1,Textiles — Détermination du vrillage après lavage — Partie 2: Étoffes tissées ou tricotées — Rectificatif technique 1,2007-10-31,1,['59.080.01'],ISO/TC 38/SC 2,9599,,[78781],"['en','fr']",7,

34471,IS,,ISO 16322-3:2005,Textiles — Determination of spirality after laundering — Part 3: Woven and knitted garments,Textiles — Détermination du vrillage après lavage — Partie 3: Vêtements tissés ou tricotés,2005-06-13,1,['59.080.01'],ISO/TC 38/SC 2,9599,,[78782],"['en','fr']",8,"<p>ISO 16322-3:2005 specifies procedures to measure the spirality or torque of woven and knitted garments after laundering. </p><p>The results obtained from different procedures may not be comparable.</p><p>ISO 16322-3:2005 is not intended to measure the spirality of garments as manufactured, but rather the spirality after laundering.</p><p>Note that some fabric constructions, such as denim, may have spirality int

30255,IS,,ISO 16328:2001,Ships and marine technology — Gyro-compasses for high-speed craft,Navires et technologie maritime — Compas gyroscopiques pour navires à grande vitesse,2001-08-30,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[62177],['en'],16,

56176,IS,,ISO 16331-1:2012,Optics and optical instruments — Laboratory procedures for testing surveying and construction instruments — Part 1: Performance of handheld laser distance meters,Optique et instruments d'optique — Méthodes d'essai de laboratoire des instruments d'observation et construction — Partie 1: Performance de télémètres laser de poche,2012-04-20,1,['17.180.30'],ISO/TC 172/SC 6,9599,,[65622],['en'],35,<p>ISO 16331-1:2012 specifies procedures for checking compliance with performance specifications of handheld laser distance meters.</p>

37857,IS,,ISO 16333:2004,Heavy commercial vehicles and buses — Steady-state rollover threshold — Tilt-table test method,Véhicules utilitaires lourds et autobus — Seuil statique de renversement — Méthode d'essai du plateau incliné,2004-09-01,1,['43.080.01'],ISO/TC 22,9599,,[57252],['en'],17,"<p>ISO 16333:2004 specifies a tilt-table test method for estimating the steady-state rollover threshold of a heavy commercial vehicle or bus, i.e. the maximum lateral acceleration that the test vehicle could sustain in steady-state turning without rolling over. It is applicable to complete roll units/combinations of roll-coupled vehicle units -- e.g. single-unit vehicles, tractor-semitrailer combinations,

56187,IS,,ISO 16338:2013,Welding for aerospace applications — Resistance spot and seam welding,Soudage pour applications aérospatiales — Soudage par résistance par points et à la molette,2013-01-03,1,['25.160.01'],ISO/TC 44/SC 14,9599,,[71704],['en'],40,"<p>ISO 16338:2013 specifies requirements for resistance spot and seam welding for aerospace applications.</p><p>It does not apply if resistance welding is simply an intermediate operation and does not affect the quality of the end product, for example when tacking basic parts prior to assembly with another process.</p><p>Resistance welding of dissimilar material group combinations is not covered by ISO 16338:2013.</p>"

6240,IS,,ISO 1634:1974,"Wrought copper and copper alloys — Rolled flat products (plate, sheet, strip) — Mechanical properties","Cuivre et alliages de cuivre corroyés — Produits laminés plats (plaques, tôles, bandes) — Caractéristiques mécaniques",1974-11-01,1,['77.150.30'],ISO/TC 26,9599,,"[6241,6242]","['en','fr']",7,

56224,IS,,ISO 16343:2013,Energy performance of buildings — Methods for expressing energy performance and for energy certification of buildings,Performance énergétique des bâtiments — Méthodes d'expression de la performance énergétique et de certification énergétique des bâtiments,2013-07-22,1,['91.120.10'],ISO/TC 163,9599,[51941],[65662],['en'],35,"<p>ISO 16346:2013 sets out ways of expressing the energy performance in an energy performance certificate of a building (including the technical building systems) and ways of expressing requirements as to the energy performance. This includes an overall numerical energy performance indicator and classes against benchmarks.</p><p>ISO 16346:2013 add

56226,IS,,ISO 16346:2013,Energy performance of buildings — Assessment of overall energy performance,Performance énergétique des bâtiments — Evaluation de la performance énergétique globale,2013-09-23,1,['91.120.10'],ISO/TC 163,9599,"[51941,50481]",[65601],['en'],62,"<p>ISO 16346:2013 defines the general procedures to assess the energy performance of buildings, including technical building systems, and defines the different types of ratings, and the building boundaries.</p><p>The purpose of ISO 16346:2013 is to</p><p>a) collate results from other International Standards that calculate energy use for specific services within a building,</p><p>b) account for energy generated in the buildi

62626,IS,,ISO 16355-1:2015,Application of statistical and related methods to new technology and product development process — Part 1: General principles and perspectives of Quality Function Deployment (QFD),Application des méthodes statistiques et des méthodes liées aux nouvelles technologies et de développement de produit — Partie 1: Principes généraux et perspectives de déploiement de la fonction qualité (QFD),2015-12-01,1,['03.120.30'],ISO/TC 69/SC 8,9599,,[74103],['en'],73,"<p>ISO 16355-1:2015 describes the quality function deployment (QFD) process, its purpose, users, and tools. It is not a management system standard. It does not provide requirements or guidelines for organizations to d

70662,IS,,ISO 16355-3:2019,Applications of statistical and related methods to new technology and product development process — Part 3: Quantitative approaches for the acquisition of voice of customer and voice of stakeholder,Application des méthodes statistiques et des méthodes liées aux nouvelles technologies et de développement de produit — Partie 3: Acquisition quantitative du retour client (voice of customer) ou du retour des parties prenantes (voice of stakholders),2019-01-30,1,['03.120.30'],ISO/TC 69/SC 8,9599,,"[78849,90058]",['en'],44,"<p>This document describes quantitative approaches for acquisition of the voice of customer (VOC) and voice of stakeholder (VOS) and its purpose, and

56510,IS,,ISO 16363:2012,Space data and information transfer systems — Audit and certification of trustworthy digital repositories,Systèmes de transfert des informations et données spatiales — Audit et certification des référentiels numériques de confiance,2012-02-14,1,['49.140'],ISO/TC 20/SC 13,9599,,[87472],['en'],70,<p>ISO 16363:2012 defines a recommended practice for assessing the trustworthiness of digital repositories. It is applicable to the entire range of digital repositories. ISO 16363:2012 can be used as a basis for certification.</p>

56513,IS,,ISO 16365-1:2014,Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 1: Designation system and basis for specifications,Plastiques — Polyuréthannes thermoplastiques pour moulage et extrusion — Partie 1: Système de désignation et base de spécification,2014-04-28,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[88277],"['en','ru']",9,"<p>ISO 16365-1:2014 establishes a system of designation for thermoplastic polyurethane elastomers, which is based on ISO 1043 (all parts) and ISO 11469.</p><p>The designation system may be used as the basis for specifications. It is applicable to all thermoplastic polyurethane elastomers. It applies to materials ready for normal use in the for

28197,IS,,ISO 16366:2001,Tools for pressing — L-shaped guides,Outillage de presse — Glissières de guidage en L,2001-03-29,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[41578],"['en','fr']",3,

28196,IS,,ISO 16367:2001,Tools for pressing — Guide plates — U- and V-blocks,Outillage de presse — Plaques de guidage — Blocs en U et en V,2001-03-29,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[41579],"['en','fr']",4,

41579,IS,,ISO 16367:2008,Tools for pressing — Guide plates — U- and V-blocks,Outillage de presse — Plaques de guidage — Blocs en U et en V,2008-03-03,2,['25.120.10'],ISO/TC 29/SC 8,9599,[28196],[86914],"['en','fr']",6,"<p>ISO 16367:2008 specifies the main dimensions and tolerances of guiding plates, U- and V-blocks, to be used in press tools.</p><p>It also specifies the designation of U- and V-blocks.</p>"

29528,IS,,ISO 16368:2003,"Mobile elevating work platforms — Design calculations, safety requirements and test methods","Plates-formes élévatrices mobiles de personnel — Calculs de conception, exigences de sécurité et méthodes d'essai",2003-09-17,1,['53.020.99'],ISO/TC 214,9599,,[43055],"['en','fr']",80,"<p>ISO 13638:2003 specifies technical safety requirements and measures for all types and sizes of mobile elevating work platforms (MEWPs) intended to move persons to working positions. </p><p>ISO 13638:2003 is applicable to the structural design calculations and stability criteria, construction, safety examinations and security tests before MEWPs are first put into service. It identifies the

43055,IS,,ISO 16368:2010,"Mobile elevating work platforms — Design, calculations, safety requirements and test methods","Plates-formes élévatrices mobiles de personnel — Conception, calculs, exigences de sécurité et méthodes d'essai",2010-05-11,2,['53.020.99'],ISO/TC 214,9599,[29528],"[83151,75873]","['en','fr','ru']",95,"<p>ISO 16368:2010 specifies safety requirements and preventive measures, and the means for their verification, for all types and sizes of mobile elevating work platforms (MEWPs) intended for moving persons to working positions. It gives the structural design calculations and stability criteria, construction, safety examinations and security tests to be applied before a MEWP

29529,IS,,ISO 16369:2000,Elevating work platforms — Mast-climbing work platforms,Matériels de mise à niveau — Plates-formes de travail se déplaçant le long de mât(s),2000-04-06,1,['53.020.99'],ISO/TC 214,9599,,[39106],['en'],64,

6252,IS,,ISO 1637:1974,Wrought copper and copper alloys — Solid products supplied in straight lengths — Mechanical properties,Cuivre et alliages de cuivre corroyés — Produits pleins livrés en longueurs droites — Caractéristiques mécaniques,1974-11-01,1,['77.150.30'],ISO/TC 26,9599,,[6253],"['en','fr']",6,

56558,IS,,ISO 16378:2013,Space systems — Measurements of thermo-optical properties of thermal control materials,Systèmes spatiaux — Mesures des propriétés thermo-optiques des matériaux de thermorégulation,2013-12-13,1,['49.140'],ISO/TC 20/SC 14,9599,,[79696],"['en','ru']",36,"<p>ISO 16378:2013 specifies the multiple measurement methods, instruments, equipment, and samples used to calculate the thermo-optical properties of thermal control materials. It compares their features, indicates their limitations and biases, and guides the applications. These measurements will be performed at ground test facilities with the purpose of obtaining material properties. The measured properties will be used

6254,IS,,ISO 1638:1974,Wrought copper and copper alloys — Drawn solid products supplied in coils or on reels — Mechanical properties,Cuivre et alliages de cuivre corroyés — Produits étirés pleins livrés sur bobines ou en couronnes — Caractéristiques mécaniques,1974-11-01,1,['77.150.30'],ISO/TC 26,9599,,[6255],"['en','fr']",5,

30946,IS,,ISO 16387:2004,Soil quality — Effects of pollutants on Enchytraeidae (Enchytraeus sp.) — Determination of effects on reproduction and survival,Qualité du sol — Effets des polluants sur les Enchytraeidae (Enchytraeus sp.) — Détermination des effets sur la reproduction et la survie,2004-01-13,1,['13.080.30'],ISO/TC 190/SC 4,9599,,[57067],"['en','fr']",26,"<p>ISO 16387:2004 describes a method for determining the effects of substances or contaminated soils on reproduction and on survival of the worm <i>Enchytraeus albidus </i>(<i>Enchytraeidae</i>). The animals are exposed to the substances by dermal and alimentary uptake using a defined artificial soil substrate to which specified amo

57067,IS,,ISO 16387:2014,Soil quality — Effects of contaminants on Enchytraeidae (Enchytraeus sp.) — Determination of effects on reproduction,Qualité du sol — Effets des contaminants sur les Enchytraeidae (Enchytraeus sp.) — Détermination des effets sur la survie et la reproduction,2014-01-06,2,['13.080.30'],ISO/TC 190/SC 4,9599,[30946],[79815],"['en','fr']",22,"<p>ISO 16387:2014 specifies one of the methods for evaluating the habitat function of soils and determining effects of soil contaminants and substances on the reproduction of <i>Enchytraeus</i> sp. by dermal and alimentary uptake in a chronic test. It is applicable to soils and soil materials of unknown quality, e.g. from contaminate

6256,IS,,ISO 1639:1974,Wrought copper alloys — Extruded sections — Mechanical properties,Alliages de cuivre corroyés — Profilés filés — Caractéristiques mécaniques,1974-11-01,1,['77.150.30'],ISO/TC 26,9599,,[1365],"['en','fr']",2,

37863,IS,,ISO 16392:2007,Tyres — Electrical resistance — Test method for measuring electrical resistance of tyres on a test rig,Pneumatiques — Résistance électrique — Méthode d'essai pour mesurer la résistance électrique des pneumatiques sur une installation d'essai,2007-10-15,1,['83.160.01'],ISO/TC 31,9599,,[62126],"['en','fr']",9,"<p>ISO 16392:2007 describes a test method to measure the electrical resistance of pneumatic and solid tyres, under load, on a test rig. Static charges on a vehicle sometimes need to be dissipated by way of the tyre. Electrical resistance inversely measures the ability of the tyre to dissipate static charge from the vehicle.</p><p>The method specifies procedures a

56516,IS,,ISO 16396-1:2015,"Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation system, marking of products and basis for specifications","Plastiques — Matériaux polyamides (PA) pour moulage et extrusion — Partie 1: Système de désignation, marquage des produits et base de spécification",2015-02-16,1,['83.080.20'],ISO/TC 61/SC 9,9599,[41675],[81940],"['en','fr']",16,"<p>ISO 16396-1:2015 establishes a system of designation for polyamide (PA) moulding and extrusion materials, which can be used as the basis for specifications. The types of polyamide plastics are differentiated from each other by a classification system based on appropriate levels of the designatory p

67792,IS,,ISO 16396-2:2017,Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériaux polyamides (PA) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,2017-03-06,1,['83.080.20'],ISO/TC 61/SC 9,9599,[55458],"[77233,80312]","['en','fr']",10,"<p>ISO 16396-2:2017 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyamide moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing

56660,IS,,ISO 16399:2014,Meters for irrigation water,Compteurs pour l'eau d'irrigation,2014-05-07,1,['65.060.35'],ISO/TC 23/SC 18,9599,"[56753,56720]",[80103],['en'],47,"<p>ISO 16399:2014 applies to water meters intended for irrigation use (herein after referred to as water meters), regardless of the water quality used for this purpose, and specifies the requirements and certification procedures for water meters, irrespective of the design technologies used to meter the actual volume of cold water or heated water flowing through a fully charged closed conduit. These water meters incorporate devices which indicate the integrated volume.</p><p>ISO 16399:2014 also applies to water meters based

6257,IS,,ISO 1640:1974,Wrought copper alloys — Forgings — Mechanical properties,Alliages de cuivre corroyés — Pièces forgées — Caractéristiques mécaniques,1974-11-01,1,['77.150.30'],ISO/TC 26,9599,,[1284],"['en','fr']",2,

56691,IS,,ISO 16404:2013,Space systems — Programme management — Requirements management,Systèmes spatiaux - Management de programme - Programme management - Management des Exigences,2013-10-23,1,['49.140'],ISO/TC 20/SC 14,9599,,[78978],['en'],16,"<p>ISO 16404:2013 presents the requirements for Requirements Management (RM) for space projects.</p><p>ISO 16404:2013 addresses the space programme/project management requirements, applicable through a top-down approach in a contractual relationship between customers and suppliers.</p><p>The objective of ISO 16404:2013 is to state and establish a common reference framework for all the customers and suppliers in the space sector to deploy Requirement

30271,IS,,ISO 16408:2004,Dentistry — Oral hygiene products — Oral rinses,Art dentaire — Produits d'hygiène buccale — Bains de bouche,2004-04-19,1,['97.170'],ISO/TC 106/SC 7,9599,,[65257],"['en','fr']",9,"<p>ISO 16408:2004 specifies physical and chemical requirements and test methods for oral rinses. It also specifies the accompanying information such as manufacturer's instructions for use, marking and/or labelling requirements.</p><p>ISO 16408:2004 is not applicable to other delivery systems (e.g. mouthsprays, foams, powders). It is not intended to describe regulatory aspects, e.g. methods of prescription.</p><p>ISO 16408:2004 is not applicable to oral rinses available by prescription only.<

65257,IS,,ISO 16408:2015,Dentistry — Oral care products — Oral rinses,Médecine bucco-dentaire — Produits d'hygiène bucco-dentaires — Bains de bouche,2015-08-17,2,['97.170'],ISO/TC 106/SC 7,9599,[30271],[84551],"['en','fr']",9,"<p>ISO 16408:2015 specifies physical and chemical requirements and test methods for oral rinses. It also specifies the accompanying information such as the manufacturer's instructions for use, marking, and/or labelling requirements.</p><p>ISO 16408:2015 is not applicable to other delivery systems (e.g. mouthsprays, foams, powders). It is not intended to describe regulatory aspects, e.g. methods of prescription.</p><p>ISO 16408:2015 is not applicable to oral rinses avai

41012,IS,,ISO 16409:2006,Dentistry — Oral hygiene products — Manual interdental brushes,Art dentaire — Produits d'hygiène bucco-dentaire — Brosses interdentaires manuelles,2006-10-04,1,['97.170'],ISO/TC 106/SC 7,9599,,[65258],"['en','fr']",11,"<p>ISO 16409:2006 specifies requirements and test methods for performance criteria for manual interdental brushes with a round cross-section of the brush head.</p><p>It also specifies the accompanying information, such as the manufacturer's instructions for use and labelling of the packaging.</p><p>ISO 16409:2006 is not applicable to powered interdental brushes, manual toothbrushes, dental floss, tapes, and strings, nor is it applicable to interdental

52950,IS,Amd,ISO 16409:2006/Amd 1:2010,Dentistry — Oral hygiene products — Manual interdental brushes — Amendment 1,Art dentaire — Produits d'hygiène bucco-dentaire — Brosses interdentaires manuelles — Amendement 1,2010-01-19,1,['97.170'],ISO/TC 106/SC 7,9599,,[65258],"['en','fr']",1,

6258,IS,,ISO 1641-1:1978,End mills and slot drills — Part 1: Milling cutters with parallel shanks,Fraises cylindriques 2 tailles et fraises à rainurer — Partie 1: Fraises à queue cylindrique,1978-04-01,1,['25.100.20'],ISO/TC 29,9599,,[31564],"['en','fr']",3,

31564,IS,,ISO 1641-1:2003,End mills and slot drills — Part 1: Milling cutters with cylindrical shanks,Fraises cylindriques 2 tailles et fraises à rainurer — Partie 1: Fraises à queue cylindrique,2003-06-03,2,['25.100.20'],ISO/TC 29/SC 9,9599,[6258],[65993],"['en','fr']",5,"<p>ISO 1642-1:2002 specifies the general dimensions of the following milling cutters with plain cylindrical, flatted cylindrical and threaded shanks:</p> end mills, flat-ended or ball-nosed -- standard series and long series; slot drills -- short series and standard series.<p>The dimensional characteristics of cylindrical shanks are in accordance with ISO 3338-1, ISO 3338-2 and 3338-3.</p>"

6259,IS,,ISO 1641-2:1978,End mills and slot drills — Part 2: Milling cutters with Morse taper shanks,Fraises cylindriques 2 tailles et fraises à rainurer — Partie 2: Fraises à queue cône Morse,1978-02-01,1,['25.100.20'],ISO/TC 29/SC 9,9599,,[50889],"['en','fr']",3,

6260,IS,,ISO 1641-3:1978,End mills and slot drills — Part 3: Milling cutters with 7/24 taper shanks,Fraises cylindriques 2 tailles et fraises à rainurer — Partie 3: Fraises à queue cône 7/24,1978-02-01,1,['25.100.20'],ISO/TC 29,9599,[7157],[31565],"['en','fr']",3,

31565,IS,,ISO 1641-3:2003,End mills and slot drills — Part 3: Milling cutters with 7/24 taper shanks,Fraises cylindriques 2 tailles et fraises à rainurer — Partie 3: Fraises à queue cône 7/24,2003-06-03,2,['25.100.20'],ISO/TC 29/SC 9,9599,[6260],[54319],"['en','fr']",5,"<p>ISO 1641-3:2002 specifies the general dimensions of the following milling cutters with 7/24 taper shanks:</p> end mills, flat-ended or ball-nosed -- standard series and long series (manual changers); slot drills -- short series and standard series (manual changers); end mills, flat-ended -- standard series and long series (automatic changers).<p>Characteristics of 7/24 taper are in accordance with ISO 297 for manual change

56703,IS,,ISO 16413:2013,"Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrumental requirements, alignment and positioning, data collection, data analysis and reporting","Évaluation de l'épaisseur, de la densité et de la largeur de l'interface des films fins par réflectrométrie de rayons X — Exigences instrumentales, alignement et positionnement, rassemblement des données, analyse des données et rapport",2013-02-12,1,"['71.040.40','35.240.70']",ISO/TC 201,9599,,[76403],['en'],30,"<p>ISO 16413:2013 specifies a method for the evaluation of thickness, density and interface width of single layer and multilayered thin films which have thicknesses be

6261,IS,,ISO 1642:1979,Plastics — Industrial laminated sheets based on thermosetting resins — Specification,Plastiques — Stratifiés industriels en planches à base de résines thermodurcissables — Spécification,1979-07-01,2,['83.140.20'],ISO/TC 61,9599,,[6262],"['en','fr']",16,

32215,IS,,ISO 16422:2006,Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications,Tubes et assemblages en poly(chlorure de vinyle) non plastifié orienté (PVC-O) pour le transport de l'eau sous pression — Spécifications,2006-05-15,1,"['23.040.45','23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[55393],"['en','fr']",24,"<p>ISO 16422:2006 specifies the general aspects of pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O), for piping systems intended to be used underground or above-ground where not exposed to direct sunlight, for water mains and services, pressurized sewer systems and irriga

55393,IS,,ISO 16422:2014,Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications,Tubes et assemblages en poly(chlorure de vinyle) non plastifié orienté (PVC-O) pour le transport de l'eau sous pression — Spécifications,2014-02-10,2,"['23.040.45','23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,[32215],"[81392,81390,81376]",['en'],26,"<p>ISO 16422:2014 specifies the requirements of pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O), for piping systems intended to be used underground or above-ground where not exposed to direct sunlight, for water mains and services, pressurized sewer systems

56739,IS,,ISO 16425:2013,Ships and marine technology — Guidelines for the installation of ship communication networks for shipboard equipment and systems,Navires et technologie maritime — Lignes directrices pour l'installation de réseaux de communication des navires pour les équipements et systèmes embarqués,2013-01-22,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[78264],['en'],61,"<p>ISO 16425:2013 specifies installation guidelines for ship communication networks for improving communication for shipboard equipment and systems that are independent from navigational equipment networks and engine-control networks.</p><p>ISO 16425:2013 utilizes existing standards relating to protocols, and provides new

56749,IS,,ISO 16438:2012,Agricultural irrigation equipment — Thermoplastic collapsible hoses for irrigation — Specifications and test methods,Matériel agricole d'irrigation — Tuyaux écrasables en matières thermoplastiques pour l'irrigation — Spécifications et méthodes d'essai,2012-11-23,1,['65.060.35'],ISO/TC 23/SC 18,9599,,[78131],['en'],5,"<p>ISO 16438:2012 specifies requirements and test methods for reinforced and non-reinforced thermoplastic collapsible hoses, which are intended to be used as main and sub-main supply lines for the conveyance and distribution of water for irrigation at water temperatures up to 50 °C.</p><p>It is applicable to irrigation hoses with nominal diameters betwee

30978,IS,,ISO 16446:2002,Ships and marine technology — Marine environmental protection — Adaptor for joining dissimilar boom connectors,Navires et technologie maritime — Protection de l'environnement marin — Adaptateur pour le raccordement de barrières antipollution munies de connecteurs dissemblables,2002-04-25,1,['13.020.40'],ISO/TC 8/SC 2,9599,,[60050],['en'],5,"<p>ISO 16446 specifies a universal method for the joining of oil-spill-containment booms with dissimilar connectors through the use of a standard adaptor with prescribed mating specifications. This International Standard does not intend to replace the design of existing connectors.</p><p>ISO 16446 does not purport to address all o

41026,IS,,ISO 16454:2007,Space systems — Structural design — Stress analysis requirements,Systèmes spatiaux — Conception des structures — Exigences relatives à l'analyse des contraintes,2007-10-22,1,['49.140'],ISO/TC 20/SC 14,9599,,[85534],['en'],13,"<p>ISO 16454:2007 is intended to be used for the determination of the stress/strain distribution and margins of safety in launch vehicles and spacecraft primary structure design. Liquid propellant engine structures, solid propellant engine nozzles and the solid propellant itself are not covered, but liquid propellant tanks, pressure vessels and solid propellant cases are within the scope of ISO 16454:2007.</p><p>ISO 16454:2007 provides requireme

61556,IS,,ISO 16457:2014,Space systems — Space environment (natural and artificial) — The Earth's ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere,Systèmes spatiaux — Environnement spatial (naturel et artificiel) — Guidage sur le modèle de l'ionosphère internationale de référence (IRI) et extensions à la plasmasphère,2014-04-10,1,"['07.060','49.140']",ISO/TC 20/SC 14,9599,[51248],[79476],['en'],15,"<p>ISO 16457:2014 provides guidance to potential users for the specification of the global distribution of ionosphere densities and temperatures, as well as the total content of electrons in the height interval from 50 km to 1 500 km. It includes

32220,IS,,ISO 16462:2004,"Cubic boron nitride inserts, tipped or solid — Dimensions, types","Plaquettes en nitrure de bore cubique, brasées ou monobloc — Dimensions, types",2004-06-22,1,['25.100.01'],ISO/TC 29/SC 9,9599,,[64173],"['en','fr']",18,"<p>ISO 16462:2004 applies to inserts with insert shapes in accordance with ISO 883, ISO 3364, ISO 3365 and ISO 6987, tipped with cubic boron nitride (BL, BH, BC) or made of solid cubic boron nitride (BL, BH, BC).</p>"

32222,IS,,ISO 16463:2004,"Polycristalline diamond inserts, tipped — Dimensions, types","Plaquettes brasées en diamant polycristallin — Dimensions, types",2004-06-15,1,['25.100.01'],ISO/TC 29/SC 9,9599,,[64174],"['en','fr']",14,"<p>ISO 16463:2004 applies to inserts with insert shapes in accordance with ISO 883 and ISO 6987, tipped with polycrystalline diamond (DP).</p>"

30990,IS,,ISO 16467:2003,Packaging — Transport packages for dangerous goods — Test methods for IBCs,Emballage — Emballages d'expédition de marchandises dangereuses — Méthodes d'essai des grands récipients vrac (GRV),2003-10-14,1,"['13.300','55.020']",ISO/TC 122/SC 3,9599,,[56877],"['en','fr']",31,<p>ISO 16467:2003 specifies the design type test requirements for Intermediate Bulk Containers (IBCs) intended for use in the transport of dangerous goods.</p>

30306,IS,,ISO 16468:2005,"Investment castings (steel, nickel alloys and cobalt alloys) — General technical requirements","Moulages à la cire perdue (acier, alliages de nickel et alliages de cobalt) — Exigences générales techniques",2005-08-08,1,['77.140.80'],ISO/TC 17/SC 11,9599,,[59278],"['en','fr']",13,"<p>ISO 16468:2005 specifies technical requirements for castings (steel, nickel alloys and cobalt alloys) produced by the investment-casting process.</p>"

59278,IS,,ISO 16468:2015,"Investment castings (steel, nickel alloys and cobalt alloys) — General technical requirements","Pièces moulées en cire perdue (acier, alliages de nickel et alliages de cobalt) — Exigences techniques générales",2015-10-01,2,['77.140.80'],ISO/TC 17/SC 11,9599,[30306],[84905],['en'],12,"<p>ISO 16468:2015 specifies technical requirements for castings (steel, nickel alloys, and cobalt alloys) produced by the investment-casting process. The International Standards specifying metallurgical material requirements for steel, nickel alloy, and cobalt alloy casting grades are listed in the Bibliography.</p><p>The requirements stated in ISO 16468:2015 form an integral part of t

56831,IS,,ISO 16474-3:2013,Paints and varnishes — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps,Peintures et vernis — Méthodes d'exposition à des sources lumineuses de laboratoire — Partie 3: Lampes fluorescentes UV,2013-11-06,1,['87.040'],ISO/TC 35/SC 9,9599,[37489],[76034],"['en','fr']",16,"<p>ISO 16474-3:2013 specifies methods for exposing coatings to fluorescent UV lamps, heat and water in apparatus designed to reproduce the weathering effects that occur when materials are exposed in actual end-use environments to daylight, or to daylight through window glass.</p><p>The coatings are exposed to different types of fluorescent UV lamps under controlled envir

37300,IS,,ISO 16484-1:2010,Building automation and control systems (BACS) — Part 1: Project specification and implementation,Systèmes de gestion technique du bâtiment (SGTB) — Partie 1: Spécification et mise en oeuvre d'un projet,2010-10-27,1,"['35.240.67','91.040.01']",ISO/TC 205,9599,,[84890],"['en','fr']",24,"<p>ISO 16484-1:2010 specifies guiding principles for project design and implementation and for the integration of other systems into the building automation and control systems (BACS). </p><p>ISO 16484-1:2010 specifies the phases required for the BACS project, including:</p><ul><li>design (determination of project requirements and production of design documents including technical sp

29682,IS,,ISO 16484-2:2004,Building automation and control systems (BACS) — Part 2: Hardware,Systèmes de gestion technique du bâtiment — Partie 2: Équipement,2004-07-30,1,"['35.240.67','91.040.01']",ISO/TC 205,9599,,"[86354,68865]",['en'],58,"<p>ISO 16484-2:2004 specifies the requirements for the hardware to perform the tasks within a building automation and control system (BACS). It provides the terms, definitions and abbreviations for the understanding of ISO 16484-2 and ISO 16484-3. ISO 16484-2:2004 relates only to physical items/devices, i.e. devices for management functions, operator stations and other human system interface devices; controllers, automation stations and application spec

37298,IS,,ISO 16484-5:2003,Building automation and control systems — Part 5: Data communication protocol,Systèmes d'automatisation et de gestion technique du bâtiment — Partie 5: Protocole de communication de données,2003-11-19,1,"['91.040.01','35.240.99']",ISO/TC 205,9599,,[44998],['en'],573,"<p>ISO 16484-5:2003 defines data communication services and protocols for computer equipment used for monitoring and control of heating, ventilation, air-conditioning and refrigeration and other building systems. It defines, in addition, an abstract, object-oriented representation of information communicated between such equipment, thereby facilitating the application and use of digital control technol

44998,IS,,ISO 16484-5:2007,Building automation and control systems — Part 5: Data communication protocol,Systèmes d'automatisation et de gestion technique du bâtiment — Partie 5: Protocole de communication de données,2007-03-09,2,"['35.240.67','91.040.01']",ISO/TC 205,9599,[37298],[55404],"['en','fr']",616,"<p>ISO 16484-5:2007 defines data communication services and protocols for computer equipment used for monitoring and control of heating, ventilation, air-conditioning and refrigeration (HVAC&amp;R) and other building systems. It defines, in addition, an abstract, object-oriented representation of information communicated between such equipment, thereby facilitating the application and use

51375,IS,Amd,ISO 16484-5:2007/Amd 1:2009,Building automation and control systems — Part 5: Data communication protocol — Amendment 1,Systèmes d'automatisation et de gestion technique du bâtiment — Partie 5: Protocole de communication de données — Amendement 1,2009-05-15,2,"['91.040.01','35.240.99']",ISO/TC 205,9599,,[55404],"['en','fr']",85,

55404,IS,,ISO 16484-5:2010,Building automation and control systems — Part 5: Data communication protocol,Systèmes d'automatisation et de gestion technique du bâtiment — Partie 5: Protocole de communication de données,2010-12-03,3,"['35.240.67','91.040.01']",ISO/TC 205,9599,"[44998,51375]",[60689],"['en','fr']",703,"<p>ISO 16484-5:2010 defines data communication services and protocols for computer equipment used for monitoring and control of heating, ventilation, air-conditioning and refrigeration (HVAC&amp;R) and other building systems. It defines, in addition, an abstract, object-oriented representation of information communicated between such equipment, thereby facilitating the application

60689,IS,,ISO 16484-5:2012,Building automation and control systems — Part 5: Data communication protocol,Systèmes d'automatisation et de gestion technique du bâtiment — Partie 5: Protocole de communication de données,2012-07-27,4,"['35.240.67','91.040.01']",ISO/TC 205,9599,[55404],[63753],['en'],1015,"<p>ISO 16484-5:2012 defines data communication services and protocols for computer equipment used for monitoring and control of heating, ventilation, air-conditioning and refrigeration (HVAC&amp;R) and other building systems. It defines, in addition, an abstract, object-oriented representation of information communicated between such equipment, thereby facilitating the application and use of di

63753,IS,,ISO 16484-5:2014,Building automation and control systems (BACS) — Part 5: Data communication protocol,Systèmes d'automatisation et de gestion technique du bâtiment — Partie 5: Protocole de communication de données,2014-05-14,5,"['35.240.67','91.040.01']",ISO/TC 205,9599,[60689],[71935],['en'],1039,"<p>ISO 16484-5:2014 defines data communication services and protocols for computer equipment used for monitoring and control of heating, ventilation, air-conditioning and refrigeration (HVAC&amp;R) and other building systems. It defines, in addition, an abstract, object-oriented representation of information communicated between such equipment, thereby facilitating the application and us

71935,IS,,ISO 16484-5:2017,Building automation and control systems (BACS) — Part 5: Data communication protocol,Systèmes d'automatisation et de gestion technique du bâtiment — Partie 5: Protocole de communication de données,2017-06-19,6,"['35.240.67','91.040.01']",ISO/TC 205,9599,[63753],"[79494,84964]",['en'],1327,"<p>The purpose of ISO 16484-5:2017 is to define data communication services and protocols for computer equipment used for monitoring and control of HVAC&amp;R and other building systems and to define, in addition, an abstract, object-oriented representation of information communicated between such equipment, thereby facilitating the application and use of digital control technolo

79629,IS,Amd,ISO 16484-5:2017/Amd 1:2020,Building automation and control systems (BACS) — Part 5: Data communication protocol — Amendment 1,Systèmes d'automatisation et de gestion technique du bâtiment — Partie 5: Protocole de communication de données — Amendement 1,2020-04-22,6,"['35.240.67','91.040.01']",ISO/TC 205,9599,,[84964],['en'],92,

37299,IS,,ISO 16484-6:2005,Building automation and control systems (BACS) — Part 6: Data communication conformance testing,Systèmes d'automatisation et de gestion technique du bâtiment — Partie 6: Essais de conformité de la communication de données,2005-12-07,1,"['35.240.67','91.040.01']",ISO/TC 205,9599,,[52149],['en'],482,"<p>ISO 16484-6:2005 defines a standard method for verifying that an implementation of the BACnet protocol provides each capability claimed in its Protocol Implementation Conformance Statement (PICS) in conformance with the BACnet standard (ISO 16484-5).</p><p>ISO 16484-6:2005 provides a comprehensive set of procedures for verifying the correct implementation of each capa

52149,IS,,ISO 16484-6:2009,Building automation and control systems (BACS) — Part 6: Data communication conformance testing,Systèmes d'automatisation et de gestion technique du bâtiment — Partie 6: Essais de conformité de la communication de données,2009-03-09,2,"['35.240.67','91.040.01']",ISO/TC 205,9599,"[37299,51376]",[63754],"['en','fr']",459,"<p>ISO 16484-6:2009 defines a standard method for verifying that an implementation of the BACnet protocol provides each capability claimed in its Protocol Implementation Conformance Statement (PICS) in conformance with the BACnet standard.</p><p>ISO 16484-6:2009 provides a comprehensive set of procedures for verifying the correct implementation of e

63754,IS,,ISO 16484-6:2014,Building automation and control systems (BACS) — Part 6: Data communication conformance testing,Systèmes d'automatisation et de gestion technique du bâtiment — Partie 6: Essais de conformité de la communication de données,2014-05-14,3,"['35.240.67','91.040.01']",ISO/TC 205,9599,[52149],[79630],"['en','fr']",564,"<p>ISO 16484-6:2014 defines a standard method for verifying that an implementation of the BACnet protocol provides each capability claimed in its Protocol Implementation Conformance Statement (PICS) in conformance with the BACnet standard.</p><p>ISO 16484-6:2014 provides a comprehensive set of procedures for verifying the correct implementation of each capa

79630,IS,,ISO 16484-6:2020,Building automation and control systems (BACS) — Part 6: Data communication conformance testing,Systèmes d'automatisation et de gestion technique du bâtiment — Partie 6: Essais de conformité de la communication de données,2020-04-01,4,"['35.240.67','91.040.01']",ISO/TC 205,9599,[63754],[90218],['en'],721,"<p>This standard provides a comprehensive set of procedures for verifying the correct implementation of each capability claimed on a BACnet PICS including:</p><p>(a) support of each claimed BACnet service, either as an initiator, executor, or both,</p><p>(b) support of each claimed BACnet object-type, including both required properties and each claimed optio

90218,IS,,ISO 16484-6:2024,Building automation and control systems (BACS) — Part 6: Data communication conformance testing,Systèmes d'automatisation et de gestion technique du bâtiment (BACS) — Partie 6: Essais de conformité de la communication de données,2024-12-06,5,"['35.240.67','91.040.01']",ISO/TC 205,9599,[79630],[93006],"['en','fr']",981,"<p>This standard provides a comprehensive set of procedures for verifying the correct implementation of each capability claimed on a BACnet PICS including:</p><p>(a) support of each claimed BACnet service, either as an initiator, executor, or both,</p><p>(b) support of each claimed BACnet object-type, including both required properties and each claim

56837,IS,,ISO 16486-1:2012,Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General,Systèmes de canalisations en matières plastiques pour la distribution de combustibles gazeux — Systèmes de canalisations en polyamide non plastifié (PA-U) avec assemblages par soudage et assemblages mécaniques — Partie 1: Généralités,2012-06-04,1,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,[40707],[74158],['en'],19,"<p>ISO 16486-1:2012 specifies the general properties of unplasticized polyamide (PA-U) compounds for the manufacture of pipes, fittings and valves made from these compounds, intended to

65074,IS,Amd,ISO 16486-1:2012/Amd 1:2014,Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General — Amendment 1,Systèmes de canalisations en matières plastiques pour la distribution de combustibles gazeux — Systèmes de canalisations en polyamide non plastifié (PA-U) avec assemblages par soudage et assemblages mécaniques — Partie 1: Généralités — Amendement 1,2014-03-25,1,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,,[74158],['en'],3,

74158,IS,,ISO 16486-1:2020,Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General,Systèmes de canalisations en matières plastiques pour la distribution de combustibles gazeux — Systèmes de canalisations en polyamide non plastifié (PA-U) avec assemblages par soudage et assemblages mécaniques — Partie 1: Généralités,2020-08-18,2,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,"[56837,65074]",[84229],"['en','fr']",25,"<p>This document specifies the general properties of unplasticized polyamide (PA-U) compounds for the manufacture of pipes, fittings and valves made from these compounds,

56838,IS,,ISO 16486-2:2012,Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes,Systèmes de canalisations en matières plastiques pour la distribution de combustibles gazeux — Systèmes de canalisations en polyamide non plastifié (PA-U) avec assemblages par soudage et assemblages mécaniques — Partie 2: Tubes,2012-06-04,1,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,[40708],[74159],['en'],11,"<p>ISO 16486-2:2012 specifies the physical and mechanical properties of pipes made from unplasticized polyamide (PA-U) in accordance with ISO 16486-1, intended to be buried and used for the supp

65075,IS,Amd,ISO 16486-2:2012/Amd 1:2014,Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes — Amendment 1,Systèmes de canalisations en matières plastiques pour la distribution de combustibles gazeux — Systèmes de canalisations en polyamide non plastifié (PA-U) avec assemblages par soudage et assemblages mécaniques — Partie 2: Tubes — Amendement 1,2014-03-25,1,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,,[74159],['en'],1,

74159,IS,,ISO 16486-2:2020,Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes,Systèmes de canalisations en matières plastiques pour la distribution de combustibles gazeux — Systèmes de canalisations en polyamide non plastifié (PA-U) avec assemblages par soudage et assemblages mécaniques — Partie 2: Tubes,2020-09-29,2,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,"[56838,65075]",[87503],"['en','fr']",14,"<p>This document specifies the physical and mechanical properties of pipes made from unplasticized polyamide (PA-U) in accordance with ISO 16486-1, intended to be buried and used

56839,IS,,ISO 16486-3:2012,Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings,Systèmes de canalisations en matières plastiques pour la distribution de combustibles gazeux — Systèmes de canalisations en polyamide non plastifié (PA-U) avec assemblages par soudage et assemblages mécaniques — Partie 3: Raccords,2012-06-04,1,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,[40709],[74160],['en'],18,"<p>ISO 16486-3:2012 specifies the physical and mechanical properties of fittings made from unplasticized polyamide (PA-U) in accordance with ISO 16486-1, intended to be buried and used for

65076,IS,Amd,ISO 16486-3:2012/Amd 1:2014,Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings — Amendment 1,Systèmes de canalisations en matières plastiques pour la distribution de combustibles gazeux — Systèmes de canalisations en polyamide non plastifié (PA-U) avec assemblages par soudage et assemblages mécaniques — Partie 3: Raccords — Amendement 1,2014-03-25,1,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,,[74160],['en'],2,

74160,IS,,ISO 16486-3:2020,Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings,Systèmes de canalisations en matières plastiques pour la distribution de combustibles gazeux — Systèmes de canalisations en polyamide non plastifié (PA-U) avec assemblages par soudage et assemblages mécaniques — Partie 3: Raccords,2020-09-17,2,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,"[65076,56839]",[87504],"['en','fr']",23,"<p>This document specifies the physical and mechanical properties of fittings made from unplasticized polyamide (PA-U) in accordance with ISO 16486‑1, intended to be buried

65195,IS,,ISO 16486-4:2016,Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves,Systèmes de canalisations en matières plastiques pour la distribution de combustibles gazeux — Systèmes de canalisations en polyamide non plastifié (PA-U) avec assemblages par soudage et assemblages mécaniques — Partie 4: Robinets,2016-06-02,1,"['75.200','83.140.30']",ISO/TC 138/SC 7,9599,,[78883],['en'],17,"<p>ISO 16486-4:2016 specifies the characteristics of valves made from unplasticized polyamide (PA-U) in accordance with ISO 16486‑1, intended to be buried and used for the supply of gaseous fuels.<

78883,IS,,ISO 16486-4:2022,Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves,Systèmes de canalisations en matières plastiques pour la distribution de combustibles gazeux — Systèmes de canalisations en polyamide non plastifié (PA-U) avec assemblages par soudage et assemblages mécaniques — Partie 4: Robinets,2022-01-14,2,"['75.200','83.140.30']",ISO/TC 138/SC 7,9599,[65195],[87593],"['en','fr']",20,"<p>This document specifies the characteristics of valves made from unplasticized polyamide (PA-U) in accordance with ISO 16486-1, intended to be buried and used for the supply of gase

56840,IS,,ISO 16486-5:2012,Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 5: Fitness for purpose of the system,Systèmes de canalisations en matières plastiques pour la distribution de combustibles gazeux — Systèmes de canalisations en polyamide non plastifié (PA-U) avec assemblages par soudage et assemblages mécaniques — Partie 5: Aptitude à l'emploi du système,2012-06-04,1,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,[50097],[74161],['en'],20,"<p>ISO 16486-5:2012 specifies the requirements of fitness for purpose of the unplasticized polyamide (PA-U) piping system, intended to be bur

56841,IS,,ISO 16486-6:2012,"Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 6: Code of practice for design, handling and installation","Systèmes de canalisations en matières plastiques pour la distribution de combustibles gazeux — Systèmes de canalisations en polyamide non plastifié (PA-U) avec assemblages par soudage et assemblages mécaniques — Partie 6: Code de pratique pour la conception, la manutention et l'installation",2012-06-04,1,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,[50938],"[74162,84737]",['en'],20,"<p>ISO 16486-6:2012 specifies a code of practice dealing with unplast

56867,IS,,ISO 16494:2014,Heat recovery ventilators and energy recovery ventilators — Method of test for performance,Ventilateurs-récupérateurs de chaleur et ventilateurs-récupérateurs d'énergie — Méthode d'essai des performances,2014-11-05,1,"['23.120','27.080']",ISO/TC 86/SC 6,9599,,[81048],['en'],38,"<p>ISO 16494:2014 prescribes a method of testing the ventilation and energy related performance of heat recovery ventilators (HRVs)and energy recovery ventilators (ERVs) that do not contain any supplemental heating (except for defrost), cooling, humidification or dehumidification components.</p>"

56877,IS,,ISO 16495:2013,Packaging — Transport packaging for dangerous goods — Test methods,Emballages — Emballages de transport pour marchandises dangereuses — Méthodes d'essai,2013-07-24,1,"['13.300','55.020']",ISO/TC 122/SC 3,9599,"[30134,30990]",[82063],"['en','fr']",52,"<p>ISO 16495:2013 specifies the information needed for the design type testing of packaging, Intermediate Bulk Containers ( IBCs) and large packaging intended for use in the transport of dangerous goods.</p>"

56896,IS,,ISO 16505:2015,Road vehicles — Ergonomic and performance aspects of Camera Monitor Systems — Requirements and test procedures,Véhicules routiers — Aspects ergonomiques et de performance des caméras embarquées — Exigences et procédures d'essai,2015-04-23,1,"['13.180','43.040.10']",ISO/TC 22/SC 35,9599,,[72000],['en'],146,"<p>ISO 16505:2015 gives minimum safety, ergonomic, and performance requirements for Camera Monitor Systems to replace mandatory inside and outside rearview mirrors for road vehicles. It addresses Camera Monitor Systems (CMS) that will be used in road vehicles to present the required outside information of a specific field of view inside the vehicle. These specifica

6267,IS,,ISO 1652:1974,Rubber latex — Determination of viscosity,Latex d'élastomère — Détermination de la viscosité,1974-03-01,1,['83.040.10'],ISO/TC 45,9599,,[6268],"['en','fr']",3,

6268,IS,,ISO 1652:1985,Rubber latex — Determination of viscosity,Latex de caoutchouc — Détermination de la viscosité,1985-11-15,2,['83.040.10'],ISO/TC 45/SC 3,9599,[6267],[30363],"['en','fr']",3,<p>The method described applies to natural and synthetic rubber latices. Two instruments are specified. The method uses a viscosimeter immersed to a specific depth in the latex. Measurements may be made on the undiluted latex or on the latex after dilution to a required total solids content.</p>

30363,IS,,ISO 1652:2004,Rubber latex — Determination of apparent viscosity by the Brookfield test method,Latex de caoutchouc — Détermination de la viscosité apparente par la méthode d'essai de Brookfield,2004-04-01,3,['83.040.10'],ISO/TC 45/SC 3,9599,[6268],[57378],"['en','fr']",6,<p>ISO 1652:2004 specifies a method for the determination of the apparent viscosity of both natural rubber latex concentrate and synthetic rubber latices by the Brookfield method. The method is also suitable for the determination of the viscosity of natural latices from sources other than <i>Hevea brasiliensis</i> and also for compounded latices.</p>

6269,IS,,ISO 1653:1975,Vulcanized rubbers — Determination of compression set under constant deflection at low temperatures,Élastomères vulcanisés — Détermination de la déformation rémanente après compression sous déformation constante à basse température,1975-03-01,1,['83.060'],ISO/TC 45/SC 2,9599,,[5165],"['en','fr']",3,

57058,IS,,ISO 16531:2013,Surface chemical analysis — Depth profiling — Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS,Analyse chimique des surfaces — Profilage d'épaisseur — Méthodes d'alignement du faisceau d'ions et la mesure associée de densité de courant ou de courant pour le profilage d'épaisseur en AES et XPS,2013-05-16,1,['71.040.40'],ISO/TC 201/SC 4,9599,,[77949],['en'],18,<p>ISO 16531:2013 specifies methods for the alignment of the ion beam to ensure good depth resolution in sputter depth profiling and optimal cleaning of surfaces when using inert gas ions in Auger electron spectroscopy and X-ray photoel

57062,IS,,ISO 16534:2012,Thermal insulating products for building applications — Determination of compressive creep,Produits isolants thermiques destinés aux applications du bâtiment — Détermination du fluage en compression,2012-05-08,1,['91.100.60'],ISO/TC 163/SC 1,9599,,[69718],['en'],16,<p>This International Standard specifies the equipment and procedures for determining the compressive creep of specimens under various conditions of stress. It is applicable to thermal insulating products.</p>

57063,IS,,ISO 16535:2012,Thermal insulating products for building applications — Determination of long-term water absorption by immersion,Produits isolants thermiques destinés aux applications du bâtiment — Détermination de l'absorption d'eau à long terme par immersion,2012-05-11,1,['91.100.60'],ISO/TC 163/SC 1,9599,,[69472],['en'],9,

57064,IS,,ISO 16536:2012,Thermal insulating products for building applications — Determination of long-term water absorption by diffusion,Produits isolants thermiques destinés aux applications du bâtiment — Détermination de l'absorption d'eau à long terme par diffusion,2012-05-11,1,['91.100.60'],ISO/TC 163/SC 1,9599,,[69514],['en'],5,

57076,IS,,ISO 16546:2012,Thermal insulating products for building applications — Determination of freeze-thaw resistance,Produits isolants thermiques destinés aux applications du bâtiment — Détermination de la résistance aux effets du gel-dégel,2012-05-11,1,['91.100.60'],ISO/TC 163/SC 1,9599,,[69719],['en'],6,"<p>This International Standard specifies the equipment and procedures for determining the effects of successive cycling from dry conditions at −20 °C to wet conditions at 20 °C on the mechanical properties and moisture content of the product. It is applicable to thermal insulating products.</p><p>It is intended to simulate freeze?thaw effects on thermal insulating products which are fr

30371,IS,,ISO 16549:2004,Textiles — Unevenness of textile strands — Capacitance method,Textiles — Irrégularité des fils textiles — Méthode capacitive,2004-05-26,1,['59.060.01'],ISO/TC 38/SC 23,9599,,[80024],['en'],10,"<p>ISO 16549:2004 describes a method, using capacitance measuring equipment, for determining the unevenness of linear density along the length of textile strands.</p><p>The method is applicable to tops, slivers, rovings, spun yarns and continuous filament yarns, made from either natural or man-made fibres, in the range of 4 tex (g/km) to 80 ktex (kg/km) for staple-fibre strands and 1 tex (g/km) to 600 tex (g/km) for continuous-filament yarns. It is not applicable to fancy yarns

6271,IS,,ISO 1655:1975,Raw rubber and rubber latex — Determination of manganese content — Potassium periodate photometric method,Caoutchoucs bruts et latex de caoutchouc — Dosage du manganèse — Méthode photométrique au periodate de potassium,1975-05-01,1,['83.040.10'],ISO/TC 45,9599,,[14660],"['en','fr']",3,

57111,IS,,ISO 16559:2014,"Solid biofuels — Terminology, definitions and descriptions","Biocombustibles solides — Terminologie, définitions et descriptions",2014-07-07,1,"['27.190','01.040.75','75.160.40']",ISO/TC 238,9599,,[75261],"['en','fr']",32,"<p>ISO 16559:2014 determines the terminology and definitions for solid biofuels. According to the scope of the ISO/TC 238 this standard only includes raw and processed material originating from</p><ul><li>forestry and arboriculture,</li><li>agriculture and horticulture,</li><li>aquaculture</li></ul>"

6272,IS,,ISO 1656:1974,Raw natural rubber and natural rubber latex — Determination of nitrogen,Caoutchouc naturel brut et latex de caoutchouc naturel — Dosage de l'azote,1974-02-01,1,['83.040.10'],ISO/TC 45,9599,,[6273],"['en','fr']",4,