Withdrawn and superseded ISO standards — page 58 of 246

6273,IS,,ISO 1656:1988,"Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content",Caoutchouc brut naturel et latex de caoutchouc naturel — Dosage de l'azote,1988-10-06,2,['83.040.10'],ISO/TC 45,9599,[6272],[23784],"['en','fr']",10,

23784,IS,,ISO 1656:1996,"Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content",Caoutchouc brut naturel et latex de caoutchouc naturel — Dosage de l'azote,1996-01-18,3,['83.040.10'],ISO/TC 45/SC 3,9599,[6273],[63607],"['en','fr']",13,<p>Specifies a macro-method and a semi-micro method for the determination of the nitrogen content in raw natural rubber and in natural rubber latex using variants of the Kjeldahl process. Replaces the second edition.</p>

63607,IS,,ISO 1656:2014,"Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content",Caoutchouc brut naturel et latex de caoutchouc naturel — Dosage de l'azote,2014-10-15,4,['83.040.10'],ISO/TC 45/SC 3,9599,[23784],[74331],"['en','fr','ru']",19,<p>ISO 1656:2014 specifies a macro-method and a semi-micro method for the determination of nitrogen in raw natural rubber and in natural rubber latex using variants of the Kjeldahl process.</p>

32312,IS,,ISO 16565:2002,Rubber — Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers,Caoutchouc — Détermination du 5-éthylidènenorbornène (ENB) ou du dicyclopentadiène (DCPD) dans les terpolymers d'éthylène-propylène-diène (EPDM),2002-03-14,1,['83.060'],ISO/TC 45/SC 2,9599,,[51196],['en'],13,"<p>This International Standard specifies the methods to be used to determine the content of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers in the 0,1 % to 15 % range.</p><p>ENB and DCPD are dienes introduced into ethylene-propylene rubbers to generate specific cure properties. S

51196,IS,,ISO 16565:2008,Rubber — Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers,Caoutchouc — Détermination du 5-éthylidènenorbornène (ENB) ou du dicyclopentadiène (DCPD) dans les terpolymers d'éthylène-propylène-diène (EPDM),2008-05-26,2,['83.060'],ISO/TC 45/SC 2,9599,[32312],[61917],"['en','ru']",13,"<p>ISO 16565:2008 specifies the methods to be used to determine the content of 5‑ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers in the 0,1 % to 15 % range.</p><p>ENB and DCPD are dienes introduced into ethylene-propylene rubbers to generate specific cure properties.

6274,IS,,ISO 1657:1975,"Raw rubber and rubber latex — Determination of iron content — 1,10- Phenanthroline photometric method","Élastomères bruts et latex d'élastomère — Dosage du fer — Méthode photométrique à la phénanthroline-1,10",1975-01-01,1,['83.040.10'],ISO/TC 45,9599,,[6275],"['en','fr']",2,

57119,IS,,ISO 16571:2014,Systems for evacuation of plume generated by medical devices,Systèmes de gaz médicaux — Systemes d'évacuation des effluents gazeux générés par l'utilisation de dispositifs medicaux,2014-03-11,1,['11.040.10'],ISO/TC 121/SC 6,9599,,[83065],['en'],36,"<p>ISO 16571:2014 specifies requirements and guidelines for the design, manufacture, installation, function, performance, maintenance, servicing, documentation, testing, and commissioning of equipment for evacuation of plume generated by medical devices.</p><p>ISO 16571:2014 is applicable to</p><p>a) portable and mobile plume evacuation systems,</p><p>b) local stationary plume evacuation systems,</p><p>c) dedicate

57128,IS,,ISO 16573:2015,Steel — Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels,Acier — Méthode de mesure pour l'évaluation de la résistance à la fragilisation par l'hydrogène des aciers à haute résistance,2015-03-25,1,['77.040.99'],ISO/TC 17/SC 7,9599,,[73153],"['en','fr']",10,"<p>ISO 16573:2015 provides a method for the evaluation of the resistance to hydrogen embrittlement (i.e. hydrogen delayed fracture) using constant loading test with hydrogen pre-charged specimens. The amount of hydrogen content absorbed in the specimens is analysed quantitatively by thermal desorption analysis such as gas chromatography, mass spectrometry and so on.

57184,IS,,ISO 16577:2016,Molecular biomarker analysis — Terms and definitions,Analyse moléculaire de biomarqueurs — Termes et définitions,2016-03-16,1,['67.050'],ISO/TC 34/SC 16,9599,,[81024],"['en','fr']",32,<p>ISO 16577:2016 gives the definition of terms used in the International Standards published in the frame of ISO/TC 34/SC 16.</p>

57185,IS,,ISO 16578:2013,Molecular biomarker analysis — General definitions and requirements for microarray detection of specific nucleic acid sequences,Analyse moléculaire des biomarqueurs — Définitions générales et exigences relatives à la détection sur microréseaux de séquences d'acides nucléiques spécifiques,2013-11-15,1,['67.050'],ISO/TC 34/SC 16,9599,,[80968],"['en','fr','ru']",7,"<p>ISO 16578:2013 defines terms for the detection of nucleic acid sequence of interest using DNA microarrays for detection of nucleic acid.</p><p>It specifies the verification processes and parameters for molecular biology analysis, including the detection and identification of specific nucleic acid sequence

6276,IS,,ISO 1658:1973,Natural rubber (NR) — Test recipes and evaluation of vulcanization characteristics,Caoutchouc naturel (NR) — Formules et évaluation des propriétés physiques des vulcanisats,1973-12-01,1,['83.060'],ISO/TC 45/SC 3,9599,,[6277],"['en','fr']",3,

6278,IS,Amd,ISO 1658:1973/Amd 1:1976,Natural rubber (NR) — Test recipes and evaluation of vulcanization characteristics — Amendment 1,Caoutchouc naturel (NR) — Formules et évaluation des propriétés physiques des vulcanisats — Amendement 1,1976-08-01,1,['83.060'],ISO/TC 45/SC 3,9599,,[6277],"['en','fr']",1,

6277,IS,,ISO 1658:1994,Natural rubber (NR) — Evaluation procedure,Caoutchouc naturel (NR) — Méthode d'évaluation,1994-02-17,2,['83.060'],ISO/TC 45/SC 3,9599,"[6278,6276]",[43206],"['en','fr']",6,"<p>Specifies physical and chemical tests on raw natural rubbers and standard materials, standard test formulae, equipment and processing methods for evaluating the vulcanization characteristics of natural rubber.</p>"

43206,IS,,ISO 1658:2009,Natural rubber (NR) — Evaluation procedure,Caoutchouc naturel (NR) — Méthode d'évaluation,2009-08-13,3,['83.060'],ISO/TC 45/SC 3,9599,[6277],[68067],"['en','fr']",17,"<p>ISO 1658:2009 specifies</p><ul><li>physical and chemical tests on raw natural rubbers;</li><li>standard materials, standard test formulae, equipment and processing methods for evaluating the vulcanization characteristics of natural rubber (NR).</li></ul>"

68067,IS,,ISO 1658:2015,Natural rubber (NR) — Evaluation procedure,Caoutchouc naturel (NR) — Méthode d'évaluation,2015-07-09,4,['83.060'],ISO/TC 45/SC 3,9599,[43206],[79517],"['en','fr']",17,"<p>ISO 1658:2015 specifies</p><p>- physical and chemical tests on raw natural rubbers;</p><p>- standard materials, standard test formulae, equipment and processing methods for evaluating the vulcanization characteristics of natural rubber (NR).</p>"

29129,IS,,ISO 16589-1:2001,Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 1: Nominal dimensions and tolerances,Bagues d'étanchéité à lèvres pour arbres tournants incorporant des éléments d'étanchéité thermoplastiques — Partie 1: Dimensions nominales et tolérances,2001-12-20,1,"['83.140.50','23.100.60']",ISO/TC 131/SC 7,9599,,[53934],"['en','fr']",13,

29130,IS,,ISO 16589-2:2001,Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 2: Vocabulary,Bagues d'étanchéité à lèvres pour arbres tournants incorporant des éléments d'étanchéité thermoplastiques — Partie 2: Vocabulaire,2001-12-20,1,"['83.140.50','23.100.60','01.040.23']",ISO/TC 131/SC 7,9599,,[53935],"['en','fr']",17,

29131,IS,,ISO 16589-3:2001,"Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 3: Storage, handling and installation","Bagues d'étanchéité à lèvres pour arbres tournants incorporant des éléments d'étanchéité thermoplastiques — Partie 3: Stockage, manipulation et montage",2001-12-20,1,"['83.140.50','23.100.60']",ISO/TC 131/SC 7,9599,,[53936],"['en','fr']",10,

29132,IS,,ISO 16589-4:2001,Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 4: Performance test procedures,Bagues d'étanchéité à lèvres pour arbres tournants incorporant des éléments d'étanchéité thermoplastiques — Partie 4: Méthodes d'essai de performance,2001-12-20,1,"['83.140.50','23.100.60']",ISO/TC 131/SC 7,9599,,[53937],"['en','fr']",14,

29133,IS,,ISO 16589-5:2001,Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 5: Identification of visual imperfections,Bagues d'étanchéité à lèvres pour arbres tournants incorporant des éléments d'étanchéité thermoplastiques — Partie 5: Identification des imperfections visuelles,2001-12-20,1,"['83.140.50','23.100.60']",ISO/TC 131/SC 7,9599,,[53938],"['en','fr']",18,

31031,IS,,ISO 16590:2000,Water quality — Determination of mercury — Methods involving enrichment by amalgamation,Qualité de l'eau — Dosage du mercure — Méthodes après enrichissement par amalgame,2000-12-21,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[51964],"['en','fr']",21,

38011,IS,,ISO 16592:2006,Microbeam analysis — Electron probe microanalysis — Guidelines for determining the carbon content of steels using a calibration curve method,Analyse par microfaisceaux — Analyse par microsonde électronique (microsonde de Castaing) — Lignes directrices pour le dosage du carbone dans les aciers par la droite d'étalonnage,2006-09-14,1,['71.040.50'],ISO/TC 202/SC 2,9599,,[60900],"['en','fr']",12,"<p>ISO 16592:2006 gives guidance on a method for the determination of the carbon content in steels containing other alloying elements (less than 1 % to 2 % by mass) using the calibration curve method. It specifies the sample preparation, X-ray detection, establishment of the cal

6279,IS,,ISO 1660:1982,Technical drawings — Dimensioning and tolerancing of profiles,Dessins techniques — Cotation et tolérancement des profils,1982-12-01,1,['01.100.20'],ISO/TC 10,9599,,[6280],"['en','fr']",4,

6280,IS,,ISO 1660:1987,Technical drawings — Dimensioning and tolerancing of profiles,Dessins techniques — Cotation et tolérancement des profils,1987-11-02,2,['01.100.20'],ISO/TC 213,9599,[6279],"[25380,63218]","['en','fr']",5,<p>This second edition constitutes a technical revision of the first one. The methods described are applicable to profiled outlines and profiled surfaces and are related to the sub-clauses in ISO 1101 dealing with the 'profile tolerance of a line' and 'profile tolerance of a surface</p>

30381,IS,,ISO 16609:2004,Banking — Requirements for message authentication using symmetric techniques,Banque — Exigences pour authentification des messages utilisant des techniques symétriques,2004-02-27,1,['35.240.40'],ISO/TC 68/SC 2,9599,"[17681,33170,16139,16136,16137]",[55225],['en'],29,"<p>ISO 16609:2004 specifies procedures, independent of the transmission process, for protecting the integrity of transmitted banking messages and for verifying that a message has originated from an authorized source. It also specifies a method by which block ciphers can be approved for use in the authentication of banking messages. In addition, because of the necessity for both members in a communicating

55225,IS,,ISO 16609:2012,Financial services — Requirements for message authentication using symmetric techniques,Services financiers — Exigences pour l'authentification des messages utilisant des techniques symétriques,2012-03-09,2,['35.240.40'],ISO/TC 68/SC 2,9599,[30381],[78305],['en'],10,

50176,IS,,ISO 16610-21:2011,Geometrical product specifications (GPS) — Filtration — Part 21: Linear profile filters: Gaussian filters,Spécification géométrique des produits (GPS) — Filtrage — Partie 21: Filtres de profil linéaires: Filtres gaussiens,2011-05-27,1,['17.040.20'],ISO/TC 213,9599,"[29876,21977]",[84786],"['en','fr']",23,"<p>ISO 16610-21:2011 specifies the metrological characteristics of the Gaussian filter, for the filtration of profiles. It specifies, in particular, how to separate long and short wave components of a surface profile. </p>"

61377,IS,,ISO 16610-22:2015,Geometrical product specifications (GPS) — Filtration — Part 22: Linear profile filters: Spline filters,Spécification géométrique des produits (GPS) — Filtrage — Partie 22: Filtres de profil linéaires: Filtres splines,2015-06-24,1,['17.040.20'],ISO/TC 213,9599,[42970],[85743],"['en','fr']",18,<p>ISO 16610-22:2015 specifies spline filters for the filtration of profiles. It specifies in particular how to separate the long- and short-wave component of a profile.</p>

61378,IS,,ISO 16610-29:2015,Geometrical product specifications (GPS) — Filtration — Part 29: Linear profile filters: Spline wavelets,Spécification géométrique des produits (GPS) — Filtrage — Partie 29: Filtres de profil linéaires: Ondelettes splines,2015-04-29,1,['17.040.20'],ISO/TC 213,9599,[42971],[70140],"['en','fr']",18,"<p>ISO 16610-29:2015 specifies spline wavelets for profiles and contains the relevant concepts. It gives the basic terminology for spline wavelets of compact support, together with their usage.</p>"

66242,IS,,ISO 16610-31:2016,Geometrical product specifications (GPS) — Filtration — Part 31: Robust profile filters: Gaussian regression filters,Spécification géométrique des produits (GPS) — Filtrage — Partie 31: Filtres de profil robustes: Filtres de régression gaussiens,2016-11-04,1,['17.040.20'],ISO/TC 213,9599,[42972],[85342],"['en','fr']",12,<p>ISO 16610-31:2016 specifies the characteristics of the discrete robust Gaussian regression filter for the evaluation of surface profiles with spike discontinuities such as deep valleys and high peaks.</p>

65107,IS,,ISO 16611:2017,"Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests","Systèmes de canalisation en plastiques pour réseaux d'assainissement sans pression — Tuyaux non-circulaires, assemblages de tuyaux et raccords en plastiques thermodurcissables renforcés de verre (PRV) à base de résines de polyester non saturé (UP) — Dimensions, exigences et essais",2017-06-15,1,"['93.030','23.040.45','91.140.80','23.040.20']",ISO/TC 138/SC 6,9599,,[86947],['en'],25,"<p>ISO 16611:2017 specifies the required properties o

63767,IS,,ISO 16620-2:2015,Plastics — Biobased content — Part 2: Determination of biobased carbon content,Plastiques — Teneur biosourcée — Partie 2: Détermination de la teneur en carbone biosourcé,2015-04-02,1,['83.080.01'],ISO/TC 61/SC 14,9599,,[72474],"['en','fr']",22,"<p>ISO 16620-2:2015 specifies a calculation method for the determination of the biobased carbon content in monomers, polymers, and plastic materials and products, based on the ¹⁴C content measurement.</p><p>ISO 16620-2:2015 is applicable to plastic products and plastic materials, polymer resins, monomers, or additives, which are made from biobased or fossil-based constituents.</p>"

63817,IS,,ISO 16620-4:2016,Plastics — Biobased content — Part 4: Determination of biobased mass content,Plastiques — Teneur biosourcée — Partie 4: Détermination de la teneur en masse biosourcée,2016-12-16,1,['83.080.01'],ISO/TC 61/SC 14,9599,,[83892],"['en','fr']",14,"<p>ISO 16620-4:2016 specifies a method of determining the biobased mass content in plastics products, based on the radiocarbon analysis and elemental analysis.</p><p>ISO 16620-4:2016 is applicable to plastic products and plastic materials, polymer resins, monomers or additives, which are made from biobased or fossil-based constituents.</p><p>This method is applicable, provided that the plastic product contains carbon element an

57301,IS,,ISO 16625:2013,"Cranes and hoists — Selection of wire ropes, drums and sheaves","Appareils de levage à charge suspendue et treuils — Choix des câbles, tambours et poulies",2013-07-03,1,['53.020.30'],ISO/TC 96/SC 3,9599,"[37643,10173,15123]","[70250,77889]","['en','fr']",21,"<p>ISO 16625:2013 specifies the minimum practical design factors, <i>Z</i>_p, for the various classifications of mechanism, rope types, rope duties and types of spooling and demonstrates how these are used in the determination of the minimum breaking force of the wire rope.</p><p>It specifies the selection factors for drums and sheaves for the various classifications of mechanisms, rope types and rope

44167,IS,,ISO 16628:2008,Tracheobronchial tubes — Sizing and marking,Sondes trachéo-bronchiques — Dimensionnement et marquage,2008-11-05,1,['11.040.10'],ISO/TC 121/SC 2,9599,[31034],"[80056,75976]",['en'],7,"<p>ISO 16628:2008 provides requirements for size designation and labelling of tracheobronchial tubes, including colour coding of the bronchial cuff and its associated pilot balloon. Tracheobronchial tubes that include bronchus blockers are excluded from the scope of ISO 16628:2008.</p>"

6283,IS,,ISO 1663:1981,Cellular plastics — Determination of water vapour transmission rate of rigid materials,Plastiques alvéolaires — Détermination du taux de transmission de la vapeur d'eau des matériaux rigides,1981-11-01,1,['83.100'],ISO/TC 61,9599,,[6284],"['en','fr']",4,

6284,IS,,ISO 1663:1999,Rigid cellular plastics — Determination of water vapour transmission properties,Plastiques alvéolaires rigides — Détermination des caractéristiques de transmission de la vapeur d'eau,1999-07-01,2,['83.100'],ISO/TC 61/SC 10,9599,[6283],[41676],"['en','fr']",14,

41676,IS,,ISO 1663:2007,Rigid cellular plastics — Determination of water vapour transmission properties,Plastiques alvéolaires rigides — Détermination des caractéristiques de transmission de la vapeur d'eau,2007-04-17,3,['83.100'],ISO/TC 61/SC 10,9599,[6284],"[55474,81900]",['en'],14,"<p>ISO 1663:2007 specifies a method of determining the water vapour transmission rate, water vapour permeance, water vapour permeability and water vapour diffusion resistance index for rigid cellular plastics. </p><p>The scope of this method provides for the testing of rigid cellular materials that have thicknesses from 10 mm upwards and which may, as an integral part of the material, contain natural skins or a

42813,IS,,ISO 16630:2009,Metallic materials — Sheet and strip — Hole expanding test,Matériaux métalliques — Tôles et bandes — Essai d'expansion de trou,2009-07-02,1,['77.040.10'],ISO/TC 164/SC 2,9599,[30394],[69771],"['en','fr']",7,"<p>ISO 16630:2009 describes a method of determining the hole expansion ratio in metallic sheets and strips with a thickness range of 1,2 mm to 6,0 mm inclusive and a width of at least 90 mm. This test is normally applicable to sheet metal and is used to assess the suitability of the product for forming flanges.</p>"

30396,IS,,ISO 16632:2003,Tobacco and tobacco products — Determination of water content — Gas-chromatographic method,Tabac et produits du tabac — Détermination de la teneur en eau — Méthode par chromatographie en phase gazeuse,2003-06-11,1,['65.160'],ISO/TC 126,9599,,[55734],"['en','fr']",9,<p>ISO 16632:2003 specifies a gas-chromatographic method for the determination of water content. It is applicable to raw tobacco as well as tobacco taken from finished products. The method is suitable for water contents ranging at least from a mass fraction of 2 percent to 55 percent.</p>

55734,IS,,ISO 16632:2013,Tobacco and tobacco products — Determination of water content — Gas-chromatographic method,Tabac et produits du tabac — Détermination de la teneur en eau — Méthode par chromatographie en phase gazeuse,2013-05-13,2,['65.160'],ISO/TC 126,9599,[30396],[79004],"['en','fr']",9,<p>ISO 16632:2013 specifies a gas-chromatographic method for the determination of water content. It is applicable to raw tobacco as well as tobacco taken from finished products. The method is suitable for water contents ranging at least from a mass fraction of 2 % to 55 %.</p>

32347,IS,,ISO 16642:2003,Computer applications in terminology — Terminological markup framework,Applications informatiques en terminologie — Plate-forme pour le balisage de terminologies informatisées,2003-09-02,1,"['35.240.30','01.020']",ISO/TC 37/SC 3,9599,,[56063],['en'],49,"<p>ISO 16642:2003 specifies a framework designed to provide guidance on the basic principles for representing data recorded in terminological data collections. This framework includes a meta-model and methods for describing specific terminological markup languages (TMLs) expressed in XML. The mechanisms for implementing constraints in a TML are defined in ISO 16642:2003, but not the specific constraints for individual

56063,IS,,ISO 16642:2017,Computer applications in terminology — Terminological markup framework,Applications informatiques en terminologie — Plate-forme pour le balisage de terminologies informatisées,2017-11-20,2,"['35.240.30','01.020']",ISO/TC 37/SC 3,9599,[32347],[87351],['en'],21,"<p>ISO 16642:2017 specifies a framework for representing data recorded in terminological data collections (TDCs). This framework includes a metamodel and methods for describing specific terminological markup languages (TMLs) expressed in XML. The mechanisms for implementing constraints in a TML are defined, but not the specific constraints for individual TMLs.</p><p>ISO 16642:2017 is designed to support the dev

29823,IS,,ISO 16649-1:2001,Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli — Part 1: Colony-count technique at 44 degrees C using membranes and 5-bromo-4-chloro-3-indolyl beta-D-glucuronide,Microbiologie des aliments — Méthode horizontale pour le dénombrement des Escherichia coli bêta-glucuronidase positive — Partie 1: Technique de comptage des colonies à 44 degrés C au moyen de membranes et de 5-bromo-4-chloro-3-indolyl bêta-D glucuronide,2001-05-03,1,['07.100.30'],ISO/TC 34/SC 9,9599,,[64951],"['en','fr']",9,

30400,IS,,ISO 16650:2004,Bead wire,Fil d'acier pour tringle,2004-06-17,1,['77.140.65'],ISO/TC 17/SC 17,9599,,"[59565,86828]","['en','fr']",9,<p>ISO 16650:2004 specifies the requirements and characteristics of round and flat wire used for strengthening the bead of all kinds of tyres.</p>

39104,IS,,ISO 16653-2:2009,"Mobile elevating work platforms — Design, calculations, safety requirements and test methods relative to special features — Part 2: MEWPs with non-conductive (insulating) components","Plates-formes élévatrices mobiles de personnel — Conception, calculs, exigences de sécurité et méthodes d'essai concernant les caractéristiques spéciales — Partie 2: PEMP avec composants non conducteurs (isolants)",2009-02-10,1,['53.020.99'],ISO/TC 214,9599,,[80780],"['en','fr']",19,"<p>ISO 16653-2:2009 specifies the design, calculations, safety requirements and test methods for mobile elevating work platforms (MEWPs) with non‑conductive (insulating) components. It is intended to be

29748,IS,,ISO 16656:2004,"Hydraulic fluid power — Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) — Mounting dimensions","Transmissions hydrauliques — Vérins course courte à simple tige, d'alésages 32 mm à 100 mm, pour utilisation à 10 MPa (100 bar) — Dimensions d'interchangeabilité",2004-06-23,1,['23.100.20'],ISO/TC 131/SC 3,9599,,[65951],"['en','fr']",4,"<p>ISO 16656:2004 establishes mounting dimensions for single rod short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar), as required for interchangeability of these commonly used hydraulic cylinders.</p>"

38031,IS,,ISO 16657:2006,Sensory analysis — Apparatus — Olive oil tasting glass,Analyse sensorielle — Appareillage — Verre pour la dégustation de l'huile d'olive,2006-07-06,1,"['67.260','67.240']",ISO/TC 34/SC 12,9599,,[85185],"['en','fr','ru']",5,"<p>ISO 16657:2006 specifies the characteristics of a glass intended for use in the sensory analysis of the organoleptic attributes of odour, taste and flavour of virgin olive oils, for the classification of such oils. The glass is not intended for the analysis of the colour or texture of olive oils.</p><p>In addition, it describes an adapted heating unit used to reach and maintain the right temperature for this analysis.</p>"

6285,IS,,ISO 1666:1973,Starch — Determination of moisture content — Oven-drying methods,Amidon et fécule — Détermination de l'humidité — Méthodes par séchage à l'étuve,1973-07-01,1,['67.180.20'],ISO/TC 93,9599,,[22791],"['en','fr']",6,

30416,IS,,ISO 16663-1:2003,Fishing nets — Method of test for the determination of mesh size — Part 1: Opening of mesh,Filets de pêche — Méthode d'essai pour la détermination des dimensions de la maille — Partie 1: Ouverture de maille,2003-05-26,1,['65.150'],ISO/TC 38,9599,,[45350],"['en','fr']",6,<p>ISO 16663-1:2003 specifies a method for the determination of size of opening of the mesh of fishing nets using a flat wedge gauge. It is applicable to active fishing gears.</p>

30417,IS,,ISO 16664:2004,Gas analysis — Handling of calibration gases and gas mixtures — Guidelines,Analyse des gaz — Manutention des gaz et des mélanges de gaz pour étalonnage — Lignes directrices,2004-07-08,1,['71.040.40'],ISO/TC 158,9599,,[70554],"['en','fr']",17,"<p>ISO 16664:2004 describes factors that may influence the composition of pure gases and homogeneous gas mixtures used for calibration purposes. ISO 16664:2004 only applies to gases or gas mixtures that are within the 'utilization period', and it pays special attention to</p><ul><li>storage of calibration gas cylinders;</li><li>calibration gas withdrawal from cylinders;</li><li>transfer of calibration gas from cylinders to the p

32348,IS,,ISO 16665:2005,Water quality — Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna,Qualité de l'eau — Lignes directrices pour l'échantillonnage quantitatif et le traitement d'échantillons de la macrofaune marine des fonds meubles,2005-10-14,1,"['13.060.70','13.060.10']",ISO/TC 147/SC 5,9599,,[54846],"['en','fr']",30,"<p>ISO 16665:2005 provides guidelines on the quantitative collection and processing of subtidal soft-bottom macrofaunal samples in marine waters.</p><p>ISO 16665:2005 encompasses: development of the sampling programme; requirements for sampling equipment; sampling and sample treatment in the field; sorting and species identificat

32351,IS,,ISO 16671:2003,Ophthalmic implants — Irrigating solutions for ophthalmic surgery,Implants ophtalmiques — Solutions d'irrigation pour la chirurgie ophtalmique,2003-05-08,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[65166],"['en','fr']",21,"<p>ISO 16671:2002 defines requirements with regards to safety for the intended performance, design attributes, preclinical and clinical evaluation, sterilization, product packaging, product labelling and the information supplied by the manufacturer.</p><p>ISO 16671:2002 applies to ophthalmic irrigating solutions (OISs), used during ophthalmic surgery. These solutions do not provide any primary immunological, pharmacological or metabolic function.</p>" 3

65166,IS,,ISO 16671:2015,Ophthalmic implants — Irrigating solutions for ophthalmic surgery,Implants ophtalmiques — Solutions d'irrigation pour la chirurgie ophtalmique,2015-08-07,2,['11.040.70'],ISO/TC 172/SC 7,9599,[32351],[83634],"['en','fr']",22,"<p>ISO 16671:2015 defines requirements with regards to safety for the intended performance, design attributes, preclinical and clinical evaluation, sterilization, product packaging, product labelling, and the information supplied by the manufacturer.</p><p>ISO 16671:2015 applies to ophthalmic irrigating solutions (OIS), used during ophthalmic surgery. These solutions do not provide any primary immunological, pharmacological, or metabolic function

72615,IS,Amd,ISO 16671:2015/Amd 1:2017,Ophthalmic implants — Irrigating solutions for ophthalmic surgery — Amendment 1,Implants ophtalmiques — Solutions d'irrigation pour la chirurgie ophtalmique — Amendement 1,2017-10-03,2,['11.040.70'],ISO/TC 172/SC 7,9599,,[83634],"['en','fr']",1,

32352,IS,,ISO 16672:2003,Ophthalmic implants — Ocular endotamponades,Implants ophtalmiques — Produits de tamponnement endoculaires,2003-01-27,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[65164],"['en','fr']",13,"<p>ISO 16672:2003 applies to ocular endotamponades (OEs), a group of non-solid implants used in ophthalmology to flatten and position a detached retina onto the choroid, or to tamponade the retina.</p><p>With regard to the safety and efficacy of OEs, ISO 16672:2003 specifies requirements for their intended performance, design attributes, pre-clinical and clinical evaluation, sterilization, product packaging, product labelling and the information supplied by the manufacturer.</p>"

65164,IS,,ISO 16672:2015,Ophthalmic implants — Ocular endotamponades,Implants ophtalmiques — Produits de tamponnement endoculaires,2015-08-07,2,['11.040.70'],ISO/TC 172/SC 7,9599,[32352],[70806],"['en','fr']",13,"<p>ISO 16672:2015 applies to ocular endotamponades (OE), a group of non-solid implants used in ophthalmology to flatten and position a detached retina onto the choroid, or to tamponade the retina.</p><p>With regard to the safety and efficacy of OE, this International Standard specifies requirements for their intended performance, design attributes, pre-clinical and clinical evaluation, sterilization, product packaging, product labelling and the information supplied by the manufactur

38035,IS,,ISO 16673:2007,Road vehicles — Ergonomic aspects of transport information and control systems — Occlusion method to assess visual demand due to the use of in-vehicle systems,Véhicules routiers — Aspects ergonomiques des systèmes d'information et de contrôle du transport — Méthode par occlusion pour évaluer la distraction visuelle due à l'utilisation des systèmes embarqués,2007-03-16,1,"['13.180','43.040.15']",ISO/TC 22/SC 39,9599,,[71508],"['en','fr']",15,<p>ISO 16673:2007 provides a procedure for measuring visual demand due to the use of visual or visual-manual interfaces accessible to the driver while the vehicle is in motion. It applies to both Original Equipment Manufacturer (O

57391,IS,,ISO 16678:2014,Guidelines for interoperable object identification and related authentication systems to deter counterfeiting and illicit trade,Lignes directrices pour l'identification interopérable d'objets et systèmes d'authentification associés destinés à décourager la contrefaçon et le commerce illicite,2014-07-07,1,['13.310'],ISO/TC 292,9599,,"[67234,81754]","['en','fr','ru']",24,"<div id='MathJax_Message' style='display: none;'></div><p>ISO 16678:2014 describes framework for identification and authentication systems. It provides recommendations and best practice guidance that include:</p><ul><li>consequences and guidance of<ul><li>management and verification of identifiers,</l

57421,IS,,ISO 16684-1:2012,"Graphic technology — Extensible metadata platform (XMP) specification — Part 1: Data model, serialization and core properties","Technologie graphique — Spécification de la plate-forme de métadonnées extensibles (XMP) — Partie 1: Modèle de données, mise en série et paramètres principaux",2012-02-09,1,"['35.240.30','37.100.99']",ISO/TC 130,9599,,[75163],['en'],43,

57447,IS,,ISO 16694:2015,Space systems — The measured parameters at firing bench and flight tests of liquid rocket engines,Systèmes spatiaux — Paramètres mesurés au banc d'allumage et essais de vol des moteurs à propergol liquide,2015-03-03,1,['49.140'],ISO/TC 20/SC 14,9599,,[83493],['en'],13,"<p>ISO 16694:2015 applies to all types of liquid rocket engines for expendable launch systems and satellites:</p><p>a) Combustible fuel (including cryogenic);</p><p>b) Large-thrust, multiple component engines, with and without afterburning;</p><p>c) Low-thrust engines, one component (mono-propellant) and two-component (bi-propellant).</p><p>This International Standard establishes a list of par

57451,IS,,ISO 16698:2013,Space environment (natural and artificial) — Methods for estimation of future geomagnetic activity,Environnement spatial (naturel et artificiel) — Méthodes d'estimation de l'activité magnétique future,2013-05-06,1,['49.140'],ISO/TC 20/SC 14,9599,,[77128],['en'],21,<p>ISO 16698:2013 specifies the methods used for estimating geomagnetic indices for time intervals ranging from short-term (hours to a few months) to the long-term (months to years).</p><p>Geomagnetic indices are used to describe the activity levels of the disturbance of the geomagnetic field. These indices can be used to estimate upper atmospheric and plasmaspheric densities and many other space environmen

30420,IS,,ISO 16700:2004,Microbeam analysis — Scanning electron microscopy — Guidelines for calibrating image magnification,Analyse par microfaisceaux — Microscopie électronique à balayage — Lignes directrices pour l'étalonnage du grandissement d'image,2004-03-05,1,['37.020'],ISO/TC 202/SC 4,9599,,[65375],"['en','fr']",16,<p>ISO 16700:2004 specifies a method for calibrating the magnification of images generated by a scanning electron microscope (SEM) using an appropriate reference material. This method is limited to magnifications determined by the available size range of structures in the calibrating reference material. This International Standard does not apply to the dedicated critical di

29388,IS,,ISO 16701:2003,Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution,Corrosion des métaux et alliages — Corrosion en atmosphère artificielle — Essai de corrosion accélérée comprenant des expositions sous conditions contrôlées à des cycles d'humidité et à des vaporisations intermittentes de solution saline,2003-11-25,1,['77.060'],ISO/TC 156,9599,,[54460],"['en','fr']",13,"<p>ISO 16701:2003 defines an accelerated corrosion test method to be used in assessing the corrosion resistance of metals in environments where there is a signif

54460,IS,,ISO 16701:2015,Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution,Corrosion des métaux et alliages — Corrosion en atmosphère artificielle — Essai de corrosion accélérée comprenant des expositions sous conditions contrôlées à des cycles d'humidité et à des vaporisations intermittentes de solution saline,2015-05-21,2,['77.060'],ISO/TC 156,9599,[29388],[83215],"['en','fr']",13,"<p>ISO 16071:2015 specifies the test method, the reagents, and the procedure to be used in an accelerated atmospheric corrosion test constituting a 6 h ex

30421,IS,,ISO 16702:2001,Workplace air quality — Determination of total isocyanate groups in air using 2-(1-methoxyphenyl)piperazine and liquid chromatography,Qualité de l'air des lieux de travail — Détermination de la concentration totale des groupements isocyanates organiques totaux dans l'air par dérivatisation avec la 1-(2-méthoxyphényl)pipérazine et par chromatographie en phase liquide,2001-05-31,1,['13.040.30'],ISO/TC 146/SC 2,9599,,[42007],"['en','fr']",16,

42007,IS,,ISO 16702:2007,Workplace air quality — Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl)piperazine and liquid chromatography,Qualité de l'air des lieux de travail — Dosage des groupements isocyanates organiques totaux dans l'air par dérivatisation avec la 1-(2-méthoxyphényl)pipérazine et par chromatographie en phase liquide,2007-12-03,2,['13.040.30'],ISO/TC 146/SC 2,9599,[30421],"[62164,87013]","['en','fr']",35,"<p>ISO 16702:2007 gives general guidance for the sampling and analysis of airborne organic isocyanate (NCO) compounds in workplace air.</p><p>ISO 16702:2007 is appropriate for a wide range of organic compounds containing isocyanate functional

61113,IS,,ISO 16711:2015,Seismic assessment and retrofit of concrete structures,Évaluation sismique et réhabilitation de structures en béton,2015-05-08,1,['91.100.30'],ISO/TC 71/SC 7,9599,,[72400],['en'],13,"<p>The purpose of ISO 16711:2015 is to reduce the risk of seismic damage by structural collapse or turnover during a seismic event.</p><p>It provides frameworks and principles of methods of detailed seismic assessment and the judgment, seismic retrofit plan and design, seismic retrofit execution of existing reinforced concrete structures before the occurrence of a severe earthquake and of the structures struck by an earthquake.</p><p>It is applicable to reinforced concrete structures and

6287,IS,,ISO 1673:1978,Onions — Guide to storage,Oignons — Guide pour l'entreposage,1978-11-01,1,['67.080.20'],ISO/TC 34,9599,,[6288],"['en','fr']",3,

40974,IS,,ISO 16730:2008,"Fire safety engineering — Assessment, verification and validation of calculation methods","Ingénierie de la sécurité incendie — Évaluation, vérification et validation des méthodes de calcul",2008-07-07,1,['13.220.01'],ISO/TC 92/SC 4,9599,,[62111],"['en','fr']",38,"<p>ISO 16730:2008 provides a framework for assessment, verification and validation of all types of calculation methods used as tools for fire safety engineering. It does not address specific fire models, but is intended to be applicable to both analytical models and complex numerical models that are addressed as calculation methods in the context of this International Standard. It is not a step-by-step pro

63140,IS,,ISO 16733-1:2015,Fire safety engineering — Selection of design fire scenarios and design fires — Part 1: Selection of design fire scenarios,Ingénierie de la sécurité incendie — Sélection de scénarios d'incendie et de feux de dimensionnement — Partie 1: Sélection de scénarios d'incendie de dimensionnement,2015-09-02,1,['13.220.01'],ISO/TC 92/SC 4,9599,[37655],[83172],"['en','fr']",31,"<p>ISO 16733-1:2015 describes a methodology for the selection of design fire scenarios that are credible but conservative for use in fire safety engineering analyses of any built environment, including buildings, structures or transportation systems. Following the procedures given in this part of ISO 1

37656,IS,,ISO 16734:2006,Fire safety engineering — Requirements governing algebraic equations — Fire plumes,Ingénierie de la sécurité incendie — Exigences régissant les équations algébriques — Panaches de feu,2006-06-29,1,['13.220.01'],ISO/TC 92/SC 4,9599,,[68894],"['en','fr']",17,"<p>ISO 16734:2006 govern the application of explicit algebraic equation sets to the calculation of specific characteristics of fire plumes.</p><p>ISO 16734:2006 is an implementation of the general requirements provided in ISO/TR 13387-3 for the case of fire dynamics calculations involving sets of explicit algebraic equations.</p><p>ISO 16734:2006 is arranged in the form of a template, where specific information re

37657,IS,,ISO 16735:2006,Fire safety engineering — Requirements governing algebraic equations — Smoke layers,Ingénierie de la sécurité incendie — Exigences régissant les équations algébriques — Couches de fumée,2006-11-07,1,['13.220.01'],ISO/TC 92/SC 4,9599,,[70457],"['en','fr']",26,"<p>The requirements given in ISO 16735:2006 govern the application of algebraic equation sets to the calculation of specific characteristics of smoke layers generated by fires.</p><p>ISO 16735:2006 is an implementation of the general requirements provided in ISO/TR 13387-3 for the case of fire dynamics calculations involving sets of algebraic equations.</p><p>ISO 16735:2006 is arranged in the form of a template,

37658,IS,,ISO 16736:2006,Fire safety engineering — Requirements governing algebraic equations — Ceiling jet flows,Ingénierie de la sécurité incendie — Exigences régissant les équations algébriques — Écoulements en jet sous plafond,2006-06-29,1,['13.220.01'],ISO/TC 92/SC 4,9599,,[68895],"['en','fr']",17,"<p>The requirements of ISO 16736:2006 govern the application of explicit algebraic equation sets to the calculation of specific characteristics of ceiling jet flows.</p><p>ISO 16736:2006 is an implementation of the general requirements provided in ISO/TR 13387-3 for the case of fire dynamics calculations involving sets of explicit algebraic equations.</p><p>ISO 16736:2006 is arranged in the f

37659,IS,,ISO 16737:2006,Fire safety engineering — Requirements governing algebraic equations — Vent flows,Ingénierie de la sécurité incendie — Exigences régissant les équations algébriques — Écoulements au travers d'une ouverture,2006-06-29,1,['13.220.01'],ISO/TC 92/SC 4,9599,,[51599],"['en','fr']",23,"<p>ISO 16737:2006 governs the application of algebraic equation sets to the calculation of specific characteristics of vent flows.</p><p>ISO 16737:2006 is an implementation of the general requirements provided in ISO/TR 13387-3 for the case of fire dynamics calculations involving sets of algebraic equations.</p><p>ISO 16737:2006 is arranged in the form of a template, where specific informatio

51599,IS,,ISO 16737:2012,Fire safety engineering — Requirements governing algebraic equations — Vent flows,Ingénierie de la sécurité incendie — Exigences régissant les équations algébriques — Écoulements au travers d'une ouverture,2012-11-29,2,['13.220.01'],ISO/TC 92/SC 4,9599,[37659],[70458],"['en','fr']",34,

70303,IS,,ISO 16739-1:2018,Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries — Part 1: Data schema,Classes IFC pour le partage des données dans le secteur de la construction et de la gestion de patrimoine — Partie 1: Schéma de données,2018-11-23,1,['25.040.40'],ISO/TC 59/SC 13,9599,[51622],[84123],['en'],1474,"<p>The Industry Foundation Classes, IFC, are an open international standard for Building Information Model (BIM) data that are exchanged and shared among software applications used by the various participants in the construction or facility management industry sector. The standard includes definitions that cover data required for

51622,IS,,ISO 16739:2013,Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries,Classes de fondation d'industrie (IFC) pour le partage des données dans le secteur de la construction et de la gestion des installations,2013-03-21,1,['25.040.40'],ISO/TC 184/SC 4,9599,[38056],[70303],"['en','fr']",23,"<div id='MathJax_Message' style='display: none;'></div><p>ISO 16739:2013 specifies a conceptual data schema and an exchange file format for Building Information Model (BIM) data. The conceptual schema is defined in EXPRESS data specification language. The standard exchange file format for exchanging and sharing data according to the conceptual sche

30433,IS,,ISO 16744:2003,Dentistry — Base metal materials for fixed dental restorations,Art dentaire — Matériaux métalliques pour les restaurations fixes,2003-12-10,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[36412],"['en','fr']",8,"<p>ISO 16744:2003 gives the classification of, and specifies requirements and test methods for metallic materials with a base metal as the main constituent. It applies to base metal materials suitable for use in fabrication of fixed dental restorations.</p><p>ISO 16744:2003 is not applicable to base metal materials intended for use in the fabrication of removable appliances, for which ISO 6871-2 and ISO 6871-2 apply.</p>"

57576,IS,,ISO 16745:2015,Environmental performance of buildings — Carbon metric of a building — Use stage,Performance environnementale des bâtiments — Métrique du carbone des bâtiments — Phase opérationnelle,2015-02-13,1,['91.040.01'],ISO/TC 59/SC 17,9599,,"[69969,69970]",['en'],38,"<p>ISO 16745:2015 provides requirements for determining and reporting a carbon metric of an existing building, associated with the operation of the building. It sets out methods for the calculation, reporting, communication, and verification of a set of carbon metrics for GHG emissions arising from the measured energy use during the operation of an existing building, the measured user-related energy use, and othe

6289,IS,,ISO 1675:1975,Plastics — Liquid resins — Determination of density by the pyknometer method,Matières plastiques — Résines liquides — Détermination de la masse volumique par la méthode du pycnomètre,1975-06-01,1,['83.080.01'],ISO/TC 61,9599,,[6290],"['en','fr']",2,

6290,IS,,ISO 1675:1985,Plastics — Liquid resins — Determination of density by the pyknometer method,Plastiques — Résines liquides — Détermination de la masse volumique par la méthode du pycnomètre,1985-08-15,2,['83.080.01'],ISO/TC 61/SC 5,9599,[6289],[83908],"['en','fr']",2,

35573,IS,,ISO 16750-1:2003,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 1: General,Véhicules routiers — Spécifications d'environnement et essais de l'équipement électrique et électronique — Partie 1: Généralités,2003-12-11,1,['43.040.10'],ISO/TC 22,9599,,[39008],"['en','fr']",12,"<p>ISO 16750-1:2003 gives definitions and general specifications for the potential environmental stresses, and corresponding tests and requirements, for the mounting of electric and electronic systems and components on road vehicles. It is applicable to environmental conditions and tests affecting electrical and electronic equipment mounted directly on or in the

39008,IS,,ISO 16750-1:2006,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 1: General,Véhicules routiers — Spécifications d'environnement et essais de l'équipement électrique et électronique — Partie 1: Généralités,2006-08-03,2,['43.040.10'],ISO/TC 22/SC 32,9599,[35573],[69568],"['en','fr']",12,<p>ISO 16750-1:2006 applies to electric and electronic systems/components for vehicles. It describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location on/in the vehicle.</p><p>ISO 16750-1:2006 contains definitions and general notes. Electromagnetic compatibility (EMC) is not cover

69568,IS,,ISO 16750-1:2018,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 1: General,Véhicules routiers — Spécifications d'environnement et essais de l'équipement électrique et électronique — Partie 1: Généralités,2018-11-29,3,['43.040.10'],ISO/TC 22/SC 32,9599,[39008],[77578],['en'],13,<p>The ISO 16750 series applies to electric and electronic systems/components for vehicles. It describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location on/in the vehicle.</p><p>This document contains definitions and general notes. Electromagnetic compatibility (EMC) is not covered by

35574,IS,,ISO 16750-2:2003,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads,Véhicules routiers — Spécifications d'environnement et essais de l'équipement électrique et électronique — Partie 2: Contraintes électriques,2003-12-01,1,['43.040.10'],ISO/TC 22,9599,,[39009],"['en','fr']",14,<p>ISO 16750-2:2003 specifies electrical loads and corresponding tests and requirements for the mounting of electric and electronic systems and components on road vehicles. It is applicable to environmental conditions and tests affecting electrical and electronic equipment mounted directly on or in the vehicle. It does not cover electromagnet

39009,IS,,ISO 16750-2:2006,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads,Véhicules routiers — Spécifications d'environnement et essais de l'équipement électrique et électronique — Partie 2: Contraintes électriques,2006-07-28,2,['43.040.10'],ISO/TC 22,9599,[35574],[46044],"['en','fr']",16,

46044,IS,,ISO 16750-2:2010,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads,Véhicules routiers — Spécifications d'environnement et essais de l'équipement électrique et électronique — Partie 2: Contraintes électriques,2010-03-08,3,['43.040.10'],ISO/TC 22,9599,[39009],[61280],['en'],19,"<p>ISO 16750-2:2010 applies to electric and electronic systems/components for road vehicles. ISO 16750-2:2010 describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location on/in the road vehicle.</p><p>ISO 16750-2:2010 describes the electrical loads. Electromagnetic compati

61280,IS,,ISO 16750-2:2012,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads,Véhicules routiers — Spécifications d'environnement et essais de l'équipement électrique et électronique — Partie 2: Contraintes électriques,2012-11-05,4,['43.040.10'],ISO/TC 22/SC 32,9599,[46044],[76119],['en'],20,"<p>ISO 16750-2:2012 applies to electric and electronic systems/components for road vehicles. It describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location on/in the road vehicle.</p><p>ISO 16750-2:2012 describes the electrical loads. Electromagnetic compatibility (

35575,IS,,ISO 16750-3:2003,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads,Véhicules routiers — Spécifications d'environnement et essais de l'équipement électrique et électronique — Partie 3: Contraintes mécaniques,2003-12-01,1,['43.040.10'],ISO/TC 22,9599,,[39010],"['en','fr']",29,"<p>ISO 16750-3:2003 describes the mechanical loads that can affect electric and electronic systems and components in respect of their mounting directly on or in road vehicles, and specifies the corresponding tests and requirements. </p>"

39010,IS,,ISO 16750-3:2007,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads,Véhicules routiers — Spécifications d'environnement et essais des équipements électrique et électronique — Partie 3: Contraintes mécaniques,2007-07-24,2,['43.040.10'],ISO/TC 22,9599,[35575],[58049],"['en','fr']",36,"<p>ISO 16750-3:2007 applies to electric and electronic systems/components for road vehicles. ISO 16750-3:2007 describes the potential environmental stresses, and specifies tests and requirements recommended for the specific mounting location on/in the vehicle.</p><p>ISO 16750-3:2007 describes the mechanical loads.</p>"

58049,IS,,ISO 16750-3:2012,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads,Véhicules routiers — Spécifications d'environnement et essais de l'équipement électrique et électronique — Partie 3: Contraintes mécaniques,2012-12-14,3,['43.040.10'],ISO/TC 22/SC 32,9599,[39010],[77579],['en'],46,<p>ISO 16750-3:2012 applies to electric and electronic systems/components for road vehicles. It describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location on/in the vehicle.</p><p>ISO 16750-3:2012 describes mechanical loads.</p>

35576,IS,,ISO 16750-4:2003,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads,Véhicules routiers — Spécifications d'environnement et essais de l'équipement électrique et électronique — Partie 4: Contraintes climatiques,2003-12-11,1,['43.040.10'],ISO/TC 22,9599,,[39011],"['en','fr']",16,<p>ISO 16750-4:2003 specifies climatic loads and corresponding tests and requirements for the mounting of electric and electronic systems and components on road vehicles. It is applicable to environmental conditions and tests affecting electrical and electronic equipment mounted directly on or in the vehicle. </p>

39011,IS,,ISO 16750-4:2006,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads,Véhicules routiers — Spécifications d'environnement et essais de l'équipement électrique et électronique — Partie 4: Contraintes climatiques,2006-07-28,2,['43.040.10'],ISO/TC 22,9599,[35576],[46043],"['en','fr']",16,<p>ISO 16750 applies to electric and electronic systems/components for road vehicles. It describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location on/in the vehicle.</p><p>ISO 16750-4:2006 describes the climatic loads.</p>

46043,IS,,ISO 16750-4:2010,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads,Véhicules routiers — Spécifications d'environnement et essais de l'équipement électrique et électronique — Partie 4: Contraintes climatiques,2010-04-06,3,['43.040.10'],ISO/TC 22/SC 32,9599,[39011],[77580],['en'],20,<p>ISO 16750-4:2010 applies to electrical and electronic systems/components for road vehicles. ISO 16750-4:2010 describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location on/in the road vehicle.</p><p>ISO 16750-4:2010 describes climatic loads.</p>

35577,IS,,ISO 16750-5:2003,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 5: Chemical loads,Véhicules routiers — Spécifications d'environnement et essais de l'équipement électrique et électronique — Partie 5: Contraintes chimiques,2003-12-11,1,['43.040.10'],ISO/TC 22,9599,,"[46042,39012]","['en','fr']",5,<p>ISO 16750-5:2003 specifies chemical loads and corresponding tests and requirements for the mounting of electric and electronic systems and components on road vehicles. It is applicable to environmental conditions and tests affecting electrical and electronic equipment mounted directly on or in the vehicle. It does not cover electromagne

46042,IS,,ISO 16750-5:2010,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 5: Chemical loads,Véhicules routiers — Spécifications d'environnement et essais de l'équipement électrique et électronique — Partie 5: Contraintes chimiques,2010-04-06,2,['43.040.10'],ISO/TC 22/SC 32,9599,[35577],"[77581,71947]",['en'],7,"<p>ISO 16750-5:2010 applies to electrical and electronic systems/components for road vehicles. ISO 16750-5:2010 describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location on/in the road vehicle.</p><p>ISO 16750-5:2010 describes chemical loads. It is not designed

6291,IS,,ISO 1677:1977,Sealed radioactive sources — General,Sources radioactives scellées — Généralités,1977-06-01,1,['13.280'],ISO/TC 85,9599,,[2638],"['en','fr']",3,

31061,IS,,ISO 16770:2004,Plastics — Determination of environmental stress cracking (ESC) of polyethylene — Full-notch creep test (FNCT),Plastiques — Détermination de la fissuration sous contrainte dans un environnement donné (ESC) du polyéthylène — Essai sur éprouvette entièrement entaillée (FNCT),2004-01-19,1,['83.080.20'],ISO/TC 61/SC 9,9599,,"[50591,70480]","['en','fr']",13,"<p>ISO 16770:2004 specifies a method of determining the stress cracking resistance of polyethylene materials in any environment. The test is carried out on notched test specimens cut from compression-moulded sheet or finished products, as applicable. The test specimen is subjected to a static tensile load when immerse

38087,IS,,ISO 16773-1:2007,Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 1: Terms and definitions,Peintures et vernis — Spectroscopie d'impédance électrochimique (SIE) sur des éprouvettes revêtues de haute impédance — Partie 1: Termes et définitions,2007-03-26,1,['87.040'],ISO/TC 35/SC 9,9599,,"[61708,64794]","['en','fr']",6,<p>ISO 16773-1:2007 gives terms and definitions for electrochemical impedance spectroscopy (EIS) for use in the other parts of ISO 16773.</p>