# Withdrawn and superseded ISO standards — page 57 of 246 Records 5601–5700. Every value below is quoted from the source named with it. ## ISO 16322-2:2005 - **Identifier:** ISO 16322-2:2005 _(verified: appears in the quote below)_ - **Item title:** Textiles — Determination of spirality after laundering — Part 2: Woven and knitted fabrics _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16322-2:2021 - **Withdrawn / published date:** 2005-06-13 _(verified: appears in the quote below)_ > 32188,IS,,ISO 16322-2:2005,Textiles — Determination of spirality after laundering — Part 2: Woven and knitted fabrics,Textiles — Détermination du vrillage après lavage — Partie 2: Étoffes tissées ou tricotées,2005-06-13,1,['59.080.01'],ISO/TC 38/SC 2,9599,,[78781],"['en','fr']",13,"

ISO 16322-2:2005 specifies three procedures (diagonal marking, inverted-T marking and mock-garment marking) to measure the spirality or torque of woven and knitted fabrics after laundering.

The results obtained from different procedures may not be comparable.

ISO 16322-2:2005 is not intended to measure the spirality of fabrics as manufactured, but rather the spirality after laundering.

Note t Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16322-2:2005/Cor 1:2007 - **Identifier:** ISO 16322-2:2005/Cor 1:2007 _(verified: appears in the quote below)_ - **Item title:** Textiles — Determination of spirality after laundering — Part 2: Woven and knitted fabrics — Technical Corrigendum 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16322-2:2021 - **Withdrawn / published date:** 2007-10-31 _(verified: appears in the quote below)_ > 46119,IS,Cor,ISO 16322-2:2005/Cor 1:2007,Textiles — Determination of spirality after laundering — Part 2: Woven and knitted fabrics — Technical Corrigendum 1,Textiles — Détermination du vrillage après lavage — Partie 2: Étoffes tissées ou tricotées — Rectificatif technique 1,2007-10-31,1,['59.080.01'],ISO/TC 38/SC 2,9599,,[78781],"['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16322-3:2005 - **Identifier:** ISO 16322-3:2005 _(verified: appears in the quote below)_ - **Item title:** Textiles — Determination of spirality after laundering — Part 3: Woven and knitted garments _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16322-3:2021 - **Withdrawn / published date:** 2005-06-13 _(verified: appears in the quote below)_ > 34471,IS,,ISO 16322-3:2005,Textiles — Determination of spirality after laundering — Part 3: Woven and knitted garments,Textiles — Détermination du vrillage après lavage — Partie 3: Vêtements tissés ou tricotés,2005-06-13,1,['59.080.01'],ISO/TC 38/SC 2,9599,,[78782],"['en','fr']",8,"

ISO 16322-3:2005 specifies procedures to measure the spirality or torque of woven and knitted garments after laundering.

The results obtained from different procedures may not be comparable.

ISO 16322-3:2005 is not intended to measure the spirality of garments as manufactured, but rather the spirality after laundering.

Note that some fabric constructions, such as denim, may have spirality int Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16328:2001 - **Identifier:** ISO 16328:2001 _(verified: appears in the quote below)_ - **Item title:** Ships and marine technology — Gyro-compasses for high-speed craft _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16328:2014 - **Withdrawn / published date:** 2001-08-30 _(verified: appears in the quote below)_ > 30255,IS,,ISO 16328:2001,Ships and marine technology — Gyro-compasses for high-speed craft,Navires et technologie maritime — Compas gyroscopiques pour navires à grande vitesse,2001-08-30,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[62177],['en'],16, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16331-1:2012 - **Identifier:** ISO 16331-1:2012 _(verified: appears in the quote below)_ - **Item title:** Optics and optical instruments — Laboratory procedures for testing surveying and construction instruments — Part 1: Performance of handheld laser distance meters _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16331-1:2017 - **Withdrawn / published date:** 2012-04-20 _(verified: appears in the quote below)_ > 56176,IS,,ISO 16331-1:2012,Optics and optical instruments — Laboratory procedures for testing surveying and construction instruments — Part 1: Performance of handheld laser distance meters,Optique et instruments d'optique — Méthodes d'essai de laboratoire des instruments d'observation et construction — Partie 1: Performance de télémètres laser de poche,2012-04-20,1,['17.180.30'],ISO/TC 172/SC 6,9599,,[65622],['en'],35,

ISO 16331-1:2012 specifies procedures for checking compliance with performance specifications of handheld laser distance meters.

Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16333:2004 - **Identifier:** ISO 16333:2004 _(verified: appears in the quote below)_ - **Item title:** Heavy commercial vehicles and buses — Steady-state rollover threshold — Tilt-table test method _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16333:2011 - **Withdrawn / published date:** 2004-09-01 _(verified: appears in the quote below)_ > 37857,IS,,ISO 16333:2004,Heavy commercial vehicles and buses — Steady-state rollover threshold — Tilt-table test method,Véhicules utilitaires lourds et autobus — Seuil statique de renversement — Méthode d'essai du plateau incliné,2004-09-01,1,['43.080.01'],ISO/TC 22,9599,,[57252],['en'],17,"

ISO 16333:2004 specifies a tilt-table test method for estimating the steady-state rollover threshold of a heavy commercial vehicle or bus, i.e. the maximum lateral acceleration that the test vehicle could sustain in steady-state turning without rolling over. It is applicable to complete roll units/combinations of roll-coupled vehicle units -- e.g. single-unit vehicles, tractor-semitrailer combinations, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16338:2013 - **Identifier:** ISO 16338:2013 _(verified: appears in the quote below)_ - **Item title:** Welding for aerospace applications — Resistance spot and seam welding _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16338:2017 - **Withdrawn / published date:** 2013-01-03 _(verified: appears in the quote below)_ > 56187,IS,,ISO 16338:2013,Welding for aerospace applications — Resistance spot and seam welding,Soudage pour applications aérospatiales — Soudage par résistance par points et à la molette,2013-01-03,1,['25.160.01'],ISO/TC 44/SC 14,9599,,[71704],['en'],40,"

ISO 16338:2013 specifies requirements for resistance spot and seam welding for aerospace applications.

It does not apply if resistance welding is simply an intermediate operation and does not affect the quality of the end product, for example when tacking basic parts prior to assembly with another process.

Resistance welding of dissimilar material group combinations is not covered by ISO 16338:2013.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1634:1974 - **Identifier:** ISO 1634:1974 _(verified: appears in the quote below)_ - **Item title:** Wrought copper and copper alloys — Rolled flat products (plate, sheet, strip) — Mechanical properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1634-1:1987 | ISO 1634-2:1987 - **Withdrawn / published date:** 1974-11-01 _(verified: appears in the quote below)_ > 6240,IS,,ISO 1634:1974,"Wrought copper and copper alloys — Rolled flat products (plate, sheet, strip) — Mechanical properties","Cuivre et alliages de cuivre corroyés — Produits laminés plats (plaques, tôles, bandes) — Caractéristiques mécaniques",1974-11-01,1,['77.150.30'],ISO/TC 26,9599,,"[6241,6242]","['en','fr']",7, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16343:2013 - **Identifier:** ISO 16343:2013 _(verified: appears in the quote below)_ - **Item title:** Energy performance of buildings — Methods for expressing energy performance and for energy certification of buildings _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 52003-1:2017 - **Withdrawn / published date:** 2013-07-22 _(verified: appears in the quote below)_ > 56224,IS,,ISO 16343:2013,Energy performance of buildings — Methods for expressing energy performance and for energy certification of buildings,Performance énergétique des bâtiments — Méthodes d'expression de la performance énergétique et de certification énergétique des bâtiments,2013-07-22,1,['91.120.10'],ISO/TC 163,9599,[51941],[65662],['en'],35,"

ISO 16346:2013 sets out ways of expressing the energy performance in an energy performance certificate of a building (including the technical building systems) and ways of expressing requirements as to the energy performance. This includes an overall numerical energy performance indicator and classes against benchmarks.

ISO 16346:2013 add Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16346:2013 - **Identifier:** ISO 16346:2013 _(verified: appears in the quote below)_ - **Item title:** Energy performance of buildings — Assessment of overall energy performance _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 52000-1:2017 - **Withdrawn / published date:** 2013-09-23 _(verified: appears in the quote below)_ > 56226,IS,,ISO 16346:2013,Energy performance of buildings — Assessment of overall energy performance,Performance énergétique des bâtiments — Evaluation de la performance énergétique globale,2013-09-23,1,['91.120.10'],ISO/TC 163,9599,"[51941,50481]",[65601],['en'],62,"

ISO 16346:2013 defines the general procedures to assess the energy performance of buildings, including technical building systems, and defines the different types of ratings, and the building boundaries.

The purpose of ISO 16346:2013 is to

a) collate results from other International Standards that calculate energy use for specific services within a building,

b) account for energy generated in the buildi Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16355-1:2015 - **Identifier:** ISO 16355-1:2015 _(verified: appears in the quote below)_ - **Item title:** Application of statistical and related methods to new technology and product development process — Part 1: General principles and perspectives of Quality Function Deployment (QFD) _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16355-1:2021 - **Withdrawn / published date:** 2015-12-01 _(verified: appears in the quote below)_ > 62626,IS,,ISO 16355-1:2015,Application of statistical and related methods to new technology and product development process — Part 1: General principles and perspectives of Quality Function Deployment (QFD),Application des méthodes statistiques et des méthodes liées aux nouvelles technologies et de développement de produit — Partie 1: Principes généraux et perspectives de déploiement de la fonction qualité (QFD),2015-12-01,1,['03.120.30'],ISO/TC 69/SC 8,9599,,[74103],['en'],73,"

ISO 16355-1:2015 describes the quality function deployment (QFD) process, its purpose, users, and tools. It is not a management system standard. It does not provide requirements or guidelines for organizations to d Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16355-3:2019 - **Identifier:** ISO 16355-3:2019 _(verified: appears in the quote below)_ - **Item title:** Applications of statistical and related methods to new technology and product development process — Part 3: Quantitative approaches for the acquisition of voice of customer and voice of stakeholder _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/AWI 16355-3 | ISO 16355-3:2025 - **Withdrawn / published date:** 2019-01-30 _(verified: appears in the quote below)_ > 70662,IS,,ISO 16355-3:2019,Applications of statistical and related methods to new technology and product development process — Part 3: Quantitative approaches for the acquisition of voice of customer and voice of stakeholder,Application des méthodes statistiques et des méthodes liées aux nouvelles technologies et de développement de produit — Partie 3: Acquisition quantitative du retour client (voice of customer) ou du retour des parties prenantes (voice of stakholders),2019-01-30,1,['03.120.30'],ISO/TC 69/SC 8,9599,,"[78849,90058]",['en'],44,"

This document describes quantitative approaches for acquisition of the voice of customer (VOC) and voice of stakeholder (VOS) and its purpose, and Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16363:2012 - **Identifier:** ISO 16363:2012 _(verified: appears in the quote below)_ - **Item title:** Space data and information transfer systems — Audit and certification of trustworthy digital repositories _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16363:2025 - **Withdrawn / published date:** 2012-02-14 _(verified: appears in the quote below)_ > 56510,IS,,ISO 16363:2012,Space data and information transfer systems — Audit and certification of trustworthy digital repositories,Systèmes de transfert des informations et données spatiales — Audit et certification des référentiels numériques de confiance,2012-02-14,1,['49.140'],ISO/TC 20/SC 13,9599,,[87472],['en'],70,

ISO 16363:2012 defines a recommended practice for assessing the trustworthiness of digital repositories. It is applicable to the entire range of digital repositories. ISO 16363:2012 can be used as a basis for certification.

Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16365-1:2014 - **Identifier:** ISO 16365-1:2014 _(verified: appears in the quote below)_ - **Item title:** Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 1: Designation system and basis for specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16365-1:2025 - **Withdrawn / published date:** 2014-04-28 _(verified: appears in the quote below)_ > 56513,IS,,ISO 16365-1:2014,Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 1: Designation system and basis for specifications,Plastiques — Polyuréthannes thermoplastiques pour moulage et extrusion — Partie 1: Système de désignation et base de spécification,2014-04-28,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[88277],"['en','ru']",9,"

ISO 16365-1:2014 establishes a system of designation for thermoplastic polyurethane elastomers, which is based on ISO 1043 (all parts) and ISO 11469.

The designation system may be used as the basis for specifications. It is applicable to all thermoplastic polyurethane elastomers. It applies to materials ready for normal use in the for Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16366:2001 - **Identifier:** ISO 16366:2001 _(verified: appears in the quote below)_ - **Item title:** Tools for pressing — L-shaped guides _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16366:2008 - **Withdrawn / published date:** 2001-03-29 _(verified: appears in the quote below)_ > 28197,IS,,ISO 16366:2001,Tools for pressing — L-shaped guides,Outillage de presse — Glissières de guidage en L,2001-03-29,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[41578],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16367:2001 - **Identifier:** ISO 16367:2001 _(verified: appears in the quote below)_ - **Item title:** Tools for pressing — Guide plates — U- and V-blocks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16367:2008 - **Withdrawn / published date:** 2001-03-29 _(verified: appears in the quote below)_ > 28196,IS,,ISO 16367:2001,Tools for pressing — Guide plates — U- and V-blocks,Outillage de presse — Plaques de guidage — Blocs en U et en V,2001-03-29,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[41579],"['en','fr']",4, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16367:2008 - **Identifier:** ISO 16367:2008 _(verified: appears in the quote below)_ - **Item title:** Tools for pressing — Guide plates — U- and V-blocks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16367:2025 - **Withdrawn / published date:** 2008-03-03 _(verified: appears in the quote below)_ > 41579,IS,,ISO 16367:2008,Tools for pressing — Guide plates — U- and V-blocks,Outillage de presse — Plaques de guidage — Blocs en U et en V,2008-03-03,2,['25.120.10'],ISO/TC 29/SC 8,9599,[28196],[86914],"['en','fr']",6,"

ISO 16367:2008 specifies the main dimensions and tolerances of guiding plates, U- and V-blocks, to be used in press tools.

It also specifies the designation of U- and V-blocks.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16368:2003 - **Identifier:** ISO 16368:2003 _(verified: appears in the quote below)_ - **Item title:** Mobile elevating work platforms — Design calculations, safety requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16368:2010 - **Withdrawn / published date:** 2003-09-17 _(verified: appears in the quote below)_ > 29528,IS,,ISO 16368:2003,"Mobile elevating work platforms — Design calculations, safety requirements and test methods","Plates-formes élévatrices mobiles de personnel — Calculs de conception, exigences de sécurité et méthodes d'essai",2003-09-17,1,['53.020.99'],ISO/TC 214,9599,,[43055],"['en','fr']",80,"

ISO 13638:2003 specifies technical safety requirements and measures for all types and sizes of mobile elevating work platforms (MEWPs) intended to move persons to working positions.

ISO 13638:2003 is applicable to the structural design calculations and stability criteria, construction, safety examinations and security tests before MEWPs are first put into service. It identifies the Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16368:2010 - **Identifier:** ISO 16368:2010 _(verified: appears in the quote below)_ - **Item title:** Mobile elevating work platforms — Design, calculations, safety requirements and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16368:2024 | ISO/PWI 16368 - **Withdrawn / published date:** 2010-05-11 _(verified: appears in the quote below)_ > 43055,IS,,ISO 16368:2010,"Mobile elevating work platforms — Design, calculations, safety requirements and test methods","Plates-formes élévatrices mobiles de personnel — Conception, calculs, exigences de sécurité et méthodes d'essai",2010-05-11,2,['53.020.99'],ISO/TC 214,9599,[29528],"[83151,75873]","['en','fr','ru']",95,"

ISO 16368:2010 specifies safety requirements and preventive measures, and the means for their verification, for all types and sizes of mobile elevating work platforms (MEWPs) intended for moving persons to working positions. It gives the structural design calculations and stability criteria, construction, safety examinations and security tests to be applied before a MEWP Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16369:2000 - **Identifier:** ISO 16369:2000 _(verified: appears in the quote below)_ - **Item title:** Elevating work platforms — Mast-climbing work platforms _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16369:2007 - **Withdrawn / published date:** 2000-04-06 _(verified: appears in the quote below)_ > 29529,IS,,ISO 16369:2000,Elevating work platforms — Mast-climbing work platforms,Matériels de mise à niveau — Plates-formes de travail se déplaçant le long de mât(s),2000-04-06,1,['53.020.99'],ISO/TC 214,9599,,[39106],['en'],64, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1637:1974 - **Identifier:** ISO 1637:1974 _(verified: appears in the quote below)_ - **Item title:** Wrought copper and copper alloys — Solid products supplied in straight lengths — Mechanical properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1637:1987 - **Withdrawn / published date:** 1974-11-01 _(verified: appears in the quote below)_ > 6252,IS,,ISO 1637:1974,Wrought copper and copper alloys — Solid products supplied in straight lengths — Mechanical properties,Cuivre et alliages de cuivre corroyés — Produits pleins livrés en longueurs droites — Caractéristiques mécaniques,1974-11-01,1,['77.150.30'],ISO/TC 26,9599,,[6253],"['en','fr']",6, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16378:2013 - **Identifier:** ISO 16378:2013 _(verified: appears in the quote below)_ - **Item title:** Space systems — Measurements of thermo-optical properties of thermal control materials _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16378:2022 - **Withdrawn / published date:** 2013-12-13 _(verified: appears in the quote below)_ > 56558,IS,,ISO 16378:2013,Space systems — Measurements of thermo-optical properties of thermal control materials,Systèmes spatiaux — Mesures des propriétés thermo-optiques des matériaux de thermorégulation,2013-12-13,1,['49.140'],ISO/TC 20/SC 14,9599,,[79696],"['en','ru']",36,"

ISO 16378:2013 specifies the multiple measurement methods, instruments, equipment, and samples used to calculate the thermo-optical properties of thermal control materials. It compares their features, indicates their limitations and biases, and guides the applications. These measurements will be performed at ground test facilities with the purpose of obtaining material properties. The measured properties will be used Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1638:1974 - **Identifier:** ISO 1638:1974 _(verified: appears in the quote below)_ - **Item title:** Wrought copper and copper alloys — Drawn solid products supplied in coils or on reels — Mechanical properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1638:1987 - **Withdrawn / published date:** 1974-11-01 _(verified: appears in the quote below)_ > 6254,IS,,ISO 1638:1974,Wrought copper and copper alloys — Drawn solid products supplied in coils or on reels — Mechanical properties,Cuivre et alliages de cuivre corroyés — Produits étirés pleins livrés sur bobines ou en couronnes — Caractéristiques mécaniques,1974-11-01,1,['77.150.30'],ISO/TC 26,9599,,[6255],"['en','fr']",5, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16387:2004 - **Identifier:** ISO 16387:2004 _(verified: appears in the quote below)_ - **Item title:** Soil quality — Effects of pollutants on Enchytraeidae (Enchytraeus sp.) — Determination of effects on reproduction and survival _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16387:2014 - **Withdrawn / published date:** 2004-01-13 _(verified: appears in the quote below)_ > 30946,IS,,ISO 16387:2004,Soil quality — Effects of pollutants on Enchytraeidae (Enchytraeus sp.) — Determination of effects on reproduction and survival,Qualité du sol — Effets des polluants sur les Enchytraeidae (Enchytraeus sp.) — Détermination des effets sur la reproduction et la survie,2004-01-13,1,['13.080.30'],ISO/TC 190/SC 4,9599,,[57067],"['en','fr']",26,"

ISO 16387:2004 describes a method for determining the effects of substances or contaminated soils on reproduction and on survival of the worm Enchytraeus albidus (Enchytraeidae). The animals are exposed to the substances by dermal and alimentary uptake using a defined artificial soil substrate to which specified amo Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16387:2014 - **Identifier:** ISO 16387:2014 _(verified: appears in the quote below)_ - **Item title:** Soil quality — Effects of contaminants on Enchytraeidae (Enchytraeus sp.) — Determination of effects on reproduction _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16387:2023 - **Withdrawn / published date:** 2014-01-06 _(verified: appears in the quote below)_ > 57067,IS,,ISO 16387:2014,Soil quality — Effects of contaminants on Enchytraeidae (Enchytraeus sp.) — Determination of effects on reproduction,Qualité du sol — Effets des contaminants sur les Enchytraeidae (Enchytraeus sp.) — Détermination des effets sur la survie et la reproduction,2014-01-06,2,['13.080.30'],ISO/TC 190/SC 4,9599,[30946],[79815],"['en','fr']",22,"

ISO 16387:2014 specifies one of the methods for evaluating the habitat function of soils and determining effects of soil contaminants and substances on the reproduction of Enchytraeus sp. by dermal and alimentary uptake in a chronic test. It is applicable to soils and soil materials of unknown quality, e.g. from contaminate Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1639:1974 - **Identifier:** ISO 1639:1974 _(verified: appears in the quote below)_ - **Item title:** Wrought copper alloys — Extruded sections — Mechanical properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 1639 - **Withdrawn / published date:** 1974-11-01 _(verified: appears in the quote below)_ > 6256,IS,,ISO 1639:1974,Wrought copper alloys — Extruded sections — Mechanical properties,Alliages de cuivre corroyés — Profilés filés — Caractéristiques mécaniques,1974-11-01,1,['77.150.30'],ISO/TC 26,9599,,[1365],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16392:2007 - **Identifier:** ISO 16392:2007 _(verified: appears in the quote below)_ - **Item title:** Tyres — Electrical resistance — Test method for measuring electrical resistance of tyres on a test rig _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16392:2017 - **Withdrawn / published date:** 2007-10-15 _(verified: appears in the quote below)_ > 37863,IS,,ISO 16392:2007,Tyres — Electrical resistance — Test method for measuring electrical resistance of tyres on a test rig,Pneumatiques — Résistance électrique — Méthode d'essai pour mesurer la résistance électrique des pneumatiques sur une installation d'essai,2007-10-15,1,['83.160.01'],ISO/TC 31,9599,,[62126],"['en','fr']",9,"

ISO 16392:2007 describes a test method to measure the electrical resistance of pneumatic and solid tyres, under load, on a test rig. Static charges on a vehicle sometimes need to be dissipated by way of the tyre. Electrical resistance inversely measures the ability of the tyre to dissipate static charge from the vehicle.

The method specifies procedures a Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16396-1:2015 - **Identifier:** ISO 16396-1:2015 _(verified: appears in the quote below)_ - **Item title:** Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation system, marking of products and basis for specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16396-1:2022 - **Withdrawn / published date:** 2015-02-16 _(verified: appears in the quote below)_ > 56516,IS,,ISO 16396-1:2015,"Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation system, marking of products and basis for specifications","Plastiques — Matériaux polyamides (PA) pour moulage et extrusion — Partie 1: Système de désignation, marquage des produits et base de spécification",2015-02-16,1,['83.080.20'],ISO/TC 61/SC 9,9599,[41675],[81940],"['en','fr']",16,"

ISO 16396-1:2015 establishes a system of designation for polyamide (PA) moulding and extrusion materials, which can be used as the basis for specifications. The types of polyamide plastics are differentiated from each other by a classification system based on appropriate levels of the designatory p Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16396-2:2017 - **Identifier:** ISO 16396-2:2017 _(verified: appears in the quote below)_ - **Item title:** Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/DIS 16396-2 | ISO 16396-2:2022 - **Withdrawn / published date:** 2017-03-06 _(verified: appears in the quote below)_ > 67792,IS,,ISO 16396-2:2017,Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériaux polyamides (PA) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,2017-03-06,1,['83.080.20'],ISO/TC 61/SC 9,9599,[55458],"[77233,80312]","['en','fr']",10,"

ISO 16396-2:2017 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyamide moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16399:2014 - **Identifier:** ISO 16399:2014 _(verified: appears in the quote below)_ - **Item title:** Meters for irrigation water _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16399:2023 - **Withdrawn / published date:** 2014-05-07 _(verified: appears in the quote below)_ > 56660,IS,,ISO 16399:2014,Meters for irrigation water,Compteurs pour l'eau d'irrigation,2014-05-07,1,['65.060.35'],ISO/TC 23/SC 18,9599,"[56753,56720]",[80103],['en'],47,"

ISO 16399:2014 applies to water meters intended for irrigation use (herein after referred to as water meters), regardless of the water quality used for this purpose, and specifies the requirements and certification procedures for water meters, irrespective of the design technologies used to meter the actual volume of cold water or heated water flowing through a fully charged closed conduit. These water meters incorporate devices which indicate the integrated volume.

ISO 16399:2014 also applies to water meters based Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1640:1974 - **Identifier:** ISO 1640:1974 _(verified: appears in the quote below)_ - **Item title:** Wrought copper alloys — Forgings — Mechanical properties _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO/WD 1640 - **Withdrawn / published date:** 1974-11-01 _(verified: appears in the quote below)_ > 6257,IS,,ISO 1640:1974,Wrought copper alloys — Forgings — Mechanical properties,Alliages de cuivre corroyés — Pièces forgées — Caractéristiques mécaniques,1974-11-01,1,['77.150.30'],ISO/TC 26,9599,,[1284],"['en','fr']",2, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16404:2013 - **Identifier:** ISO 16404:2013 _(verified: appears in the quote below)_ - **Item title:** Space systems — Programme management — Requirements management _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16404:2020 - **Withdrawn / published date:** 2013-10-23 _(verified: appears in the quote below)_ > 56691,IS,,ISO 16404:2013,Space systems — Programme management — Requirements management,Systèmes spatiaux - Management de programme - Programme management - Management des Exigences,2013-10-23,1,['49.140'],ISO/TC 20/SC 14,9599,,[78978],['en'],16,"

ISO 16404:2013 presents the requirements for Requirements Management (RM) for space projects.

ISO 16404:2013 addresses the space programme/project management requirements, applicable through a top-down approach in a contractual relationship between customers and suppliers.

The objective of ISO 16404:2013 is to state and establish a common reference framework for all the customers and suppliers in the space sector to deploy Requirement Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16408:2004 - **Identifier:** ISO 16408:2004 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Oral hygiene products — Oral rinses _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16408:2015 - **Withdrawn / published date:** 2004-04-19 _(verified: appears in the quote below)_ > 30271,IS,,ISO 16408:2004,Dentistry — Oral hygiene products — Oral rinses,Art dentaire — Produits d'hygiène buccale — Bains de bouche,2004-04-19,1,['97.170'],ISO/TC 106/SC 7,9599,,[65257],"['en','fr']",9,"

ISO 16408:2004 specifies physical and chemical requirements and test methods for oral rinses. It also specifies the accompanying information such as manufacturer's instructions for use, marking and/or labelling requirements.

ISO 16408:2004 is not applicable to other delivery systems (e.g. mouthsprays, foams, powders). It is not intended to describe regulatory aspects, e.g. methods of prescription.

ISO 16408:2004 is not applicable to oral rinses available by prescription only.< Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16408:2015 - **Identifier:** ISO 16408:2015 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Oral care products — Oral rinses _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16408:2025 - **Withdrawn / published date:** 2015-08-17 _(verified: appears in the quote below)_ > 65257,IS,,ISO 16408:2015,Dentistry — Oral care products — Oral rinses,Médecine bucco-dentaire — Produits d'hygiène bucco-dentaires — Bains de bouche,2015-08-17,2,['97.170'],ISO/TC 106/SC 7,9599,[30271],[84551],"['en','fr']",9,"

ISO 16408:2015 specifies physical and chemical requirements and test methods for oral rinses. It also specifies the accompanying information such as the manufacturer's instructions for use, marking, and/or labelling requirements.

ISO 16408:2015 is not applicable to other delivery systems (e.g. mouthsprays, foams, powders). It is not intended to describe regulatory aspects, e.g. methods of prescription.

ISO 16408:2015 is not applicable to oral rinses avai Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16409:2006 - **Identifier:** ISO 16409:2006 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Oral hygiene products — Manual interdental brushes _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16409:2016 - **Withdrawn / published date:** 2006-10-04 _(verified: appears in the quote below)_ > 41012,IS,,ISO 16409:2006,Dentistry — Oral hygiene products — Manual interdental brushes,Art dentaire — Produits d'hygiène bucco-dentaire — Brosses interdentaires manuelles,2006-10-04,1,['97.170'],ISO/TC 106/SC 7,9599,,[65258],"['en','fr']",11,"

ISO 16409:2006 specifies requirements and test methods for performance criteria for manual interdental brushes with a round cross-section of the brush head.

It also specifies the accompanying information, such as the manufacturer's instructions for use and labelling of the packaging.

ISO 16409:2006 is not applicable to powered interdental brushes, manual toothbrushes, dental floss, tapes, and strings, nor is it applicable to interdental Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16409:2006/Amd 1:2010 - **Identifier:** ISO 16409:2006/Amd 1:2010 _(verified: appears in the quote below)_ - **Item title:** Dentistry — Oral hygiene products — Manual interdental brushes — Amendment 1 _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16409:2016 - **Withdrawn / published date:** 2010-01-19 _(verified: appears in the quote below)_ > 52950,IS,Amd,ISO 16409:2006/Amd 1:2010,Dentistry — Oral hygiene products — Manual interdental brushes — Amendment 1,Art dentaire — Produits d'hygiène bucco-dentaire — Brosses interdentaires manuelles — Amendement 1,2010-01-19,1,['97.170'],ISO/TC 106/SC 7,9599,,[65258],"['en','fr']",1, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1641-1:1978 - **Identifier:** ISO 1641-1:1978 _(verified: appears in the quote below)_ - **Item title:** End mills and slot drills — Part 1: Milling cutters with parallel shanks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1641-1:2003 - **Withdrawn / published date:** 1978-04-01 _(verified: appears in the quote below)_ > 6258,IS,,ISO 1641-1:1978,End mills and slot drills — Part 1: Milling cutters with parallel shanks,Fraises cylindriques 2 tailles et fraises à rainurer — Partie 1: Fraises à queue cylindrique,1978-04-01,1,['25.100.20'],ISO/TC 29,9599,,[31564],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1641-1:2003 - **Identifier:** ISO 1641-1:2003 _(verified: appears in the quote below)_ - **Item title:** End mills and slot drills — Part 1: Milling cutters with cylindrical shanks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1641-1:2016 - **Withdrawn / published date:** 2003-06-03 _(verified: appears in the quote below)_ > 31564,IS,,ISO 1641-1:2003,End mills and slot drills — Part 1: Milling cutters with cylindrical shanks,Fraises cylindriques 2 tailles et fraises à rainurer — Partie 1: Fraises à queue cylindrique,2003-06-03,2,['25.100.20'],ISO/TC 29/SC 9,9599,[6258],[65993],"['en','fr']",5,"

ISO 1642-1:2002 specifies the general dimensions of the following milling cutters with plain cylindrical, flatted cylindrical and threaded shanks:

end mills, flat-ended or ball-nosed -- standard series and long series; slot drills -- short series and standard series.

The dimensional characteristics of cylindrical shanks are in accordance with ISO 3338-1, ISO 3338-2 and 3338-3.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1641-2:1978 - **Identifier:** ISO 1641-2:1978 _(verified: appears in the quote below)_ - **Item title:** End mills and slot drills — Part 2: Milling cutters with Morse taper shanks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1641-2:2011 - **Withdrawn / published date:** 1978-02-01 _(verified: appears in the quote below)_ > 6259,IS,,ISO 1641-2:1978,End mills and slot drills — Part 2: Milling cutters with Morse taper shanks,Fraises cylindriques 2 tailles et fraises à rainurer — Partie 2: Fraises à queue cône Morse,1978-02-01,1,['25.100.20'],ISO/TC 29/SC 9,9599,,[50889],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1641-3:1978 - **Identifier:** ISO 1641-3:1978 _(verified: appears in the quote below)_ - **Item title:** End mills and slot drills — Part 3: Milling cutters with 7/24 taper shanks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1641-3:2003 - **Withdrawn / published date:** 1978-02-01 _(verified: appears in the quote below)_ > 6260,IS,,ISO 1641-3:1978,End mills and slot drills — Part 3: Milling cutters with 7/24 taper shanks,Fraises cylindriques 2 tailles et fraises à rainurer — Partie 3: Fraises à queue cône 7/24,1978-02-01,1,['25.100.20'],ISO/TC 29,9599,[7157],[31565],"['en','fr']",3, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1641-3:2003 - **Identifier:** ISO 1641-3:2003 _(verified: appears in the quote below)_ - **Item title:** End mills and slot drills — Part 3: Milling cutters with 7/24 taper shanks _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1641-3:2011 - **Withdrawn / published date:** 2003-06-03 _(verified: appears in the quote below)_ > 31565,IS,,ISO 1641-3:2003,End mills and slot drills — Part 3: Milling cutters with 7/24 taper shanks,Fraises cylindriques 2 tailles et fraises à rainurer — Partie 3: Fraises à queue cône 7/24,2003-06-03,2,['25.100.20'],ISO/TC 29/SC 9,9599,[6260],[54319],"['en','fr']",5,"

ISO 1641-3:2002 specifies the general dimensions of the following milling cutters with 7/24 taper shanks:

end mills, flat-ended or ball-nosed -- standard series and long series (manual changers); slot drills -- short series and standard series (manual changers); end mills, flat-ended -- standard series and long series (automatic changers).

Characteristics of 7/24 taper are in accordance with ISO 297 for manual change Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16413:2013 - **Identifier:** ISO 16413:2013 _(verified: appears in the quote below)_ - **Item title:** Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrumental requirements, alignment and positioning, data collection, data analysis and reporting _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16413:2020 - **Withdrawn / published date:** 2013-02-12 _(verified: appears in the quote below)_ > 56703,IS,,ISO 16413:2013,"Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrumental requirements, alignment and positioning, data collection, data analysis and reporting","Évaluation de l'épaisseur, de la densité et de la largeur de l'interface des films fins par réflectrométrie de rayons X — Exigences instrumentales, alignement et positionnement, rassemblement des données, analyse des données et rapport",2013-02-12,1,"['71.040.40','35.240.70']",ISO/TC 201,9599,,[76403],['en'],30,"

ISO 16413:2013 specifies a method for the evaluation of thickness, density and interface width of single layer and multilayered thin films which have thicknesses be Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 1642:1979 - **Identifier:** ISO 1642:1979 _(verified: appears in the quote below)_ - **Item title:** Plastics — Industrial laminated sheets based on thermosetting resins — Specification _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 1642:1987 - **Withdrawn / published date:** 1979-07-01 _(verified: appears in the quote below)_ > 6261,IS,,ISO 1642:1979,Plastics — Industrial laminated sheets based on thermosetting resins — Specification,Plastiques — Stratifiés industriels en planches à base de résines thermodurcissables — Spécification,1979-07-01,2,['83.140.20'],ISO/TC 61,9599,,[6262],"['en','fr']",16, Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16422:2006 - **Identifier:** ISO 16422:2006 _(verified: appears in the quote below)_ - **Item title:** Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16422:2014 - **Withdrawn / published date:** 2006-05-15 _(verified: appears in the quote below)_ > 32215,IS,,ISO 16422:2006,Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications,Tubes et assemblages en poly(chlorure de vinyle) non plastifié orienté (PVC-O) pour le transport de l'eau sous pression — Spécifications,2006-05-15,1,"['23.040.45','23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[55393],"['en','fr']",24,"

ISO 16422:2006 specifies the general aspects of pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O), for piping systems intended to be used underground or above-ground where not exposed to direct sunlight, for water mains and services, pressurized sewer systems and irriga Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16422:2014 - **Identifier:** ISO 16422:2014 _(verified: appears in the quote below)_ - **Item title:** Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16422-5:2024 | ISO 16422-2:2024 | ISO 16422-1:2024 - **Withdrawn / published date:** 2014-02-10 _(verified: appears in the quote below)_ > 55393,IS,,ISO 16422:2014,Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications,Tubes et assemblages en poly(chlorure de vinyle) non plastifié orienté (PVC-O) pour le transport de l'eau sous pression — Spécifications,2014-02-10,2,"['23.040.45','23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,[32215],"[81392,81390,81376]",['en'],26,"

ISO 16422:2014 specifies the requirements of pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O), for piping systems intended to be used underground or above-ground where not exposed to direct sunlight, for water mains and services, pressurized sewer systems Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16425:2013 - **Identifier:** ISO 16425:2013 _(verified: appears in the quote below)_ - **Item title:** Ships and marine technology — Guidelines for the installation of ship communication networks for shipboard equipment and systems _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16425:2024 - **Withdrawn / published date:** 2013-01-22 _(verified: appears in the quote below)_ > 56739,IS,,ISO 16425:2013,Ships and marine technology — Guidelines for the installation of ship communication networks for shipboard equipment and systems,Navires et technologie maritime — Lignes directrices pour l'installation de réseaux de communication des navires pour les équipements et systèmes embarqués,2013-01-22,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[78264],['en'],61,"

ISO 16425:2013 specifies installation guidelines for ship communication networks for improving communication for shipboard equipment and systems that are independent from navigational equipment networks and engine-control networks.

ISO 16425:2013 utilizes existing standards relating to protocols, and provides new Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16438:2012 - **Identifier:** ISO 16438:2012 _(verified: appears in the quote below)_ - **Item title:** Agricultural irrigation equipment — Thermoplastic collapsible hoses for irrigation — Specifications and test methods _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16438:2021 - **Withdrawn / published date:** 2012-11-23 _(verified: appears in the quote below)_ > 56749,IS,,ISO 16438:2012,Agricultural irrigation equipment — Thermoplastic collapsible hoses for irrigation — Specifications and test methods,Matériel agricole d'irrigation — Tuyaux écrasables en matières thermoplastiques pour l'irrigation — Spécifications et méthodes d'essai,2012-11-23,1,['65.060.35'],ISO/TC 23/SC 18,9599,,[78131],['en'],5,"

ISO 16438:2012 specifies requirements and test methods for reinforced and non-reinforced thermoplastic collapsible hoses, which are intended to be used as main and sub-main supply lines for the conveyance and distribution of water for irrigation at water temperatures up to 50 °C.

It is applicable to irrigation hoses with nominal diameters betwee Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16446:2002 - **Identifier:** ISO 16446:2002 _(verified: appears in the quote below)_ - **Item title:** Ships and marine technology — Marine environmental protection — Adaptor for joining dissimilar boom connectors _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16446:2013 - **Withdrawn / published date:** 2002-04-25 _(verified: appears in the quote below)_ > 30978,IS,,ISO 16446:2002,Ships and marine technology — Marine environmental protection — Adaptor for joining dissimilar boom connectors,Navires et technologie maritime — Protection de l'environnement marin — Adaptateur pour le raccordement de barrières antipollution munies de connecteurs dissemblables,2002-04-25,1,['13.020.40'],ISO/TC 8/SC 2,9599,,[60050],['en'],5,"

ISO 16446 specifies a universal method for the joining of oil-spill-containment booms with dissimilar connectors through the use of a standard adaptor with prescribed mating specifications. This International Standard does not intend to replace the design of existing connectors.

ISO 16446 does not purport to address all o Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16454:2007 - **Identifier:** ISO 16454:2007 _(verified: appears in the quote below)_ - **Item title:** Space systems — Structural design — Stress analysis requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16454:2024 - **Withdrawn / published date:** 2007-10-22 _(verified: appears in the quote below)_ > 41026,IS,,ISO 16454:2007,Space systems — Structural design — Stress analysis requirements,Systèmes spatiaux — Conception des structures — Exigences relatives à l'analyse des contraintes,2007-10-22,1,['49.140'],ISO/TC 20/SC 14,9599,,[85534],['en'],13,"

ISO 16454:2007 is intended to be used for the determination of the stress/strain distribution and margins of safety in launch vehicles and spacecraft primary structure design. Liquid propellant engine structures, solid propellant engine nozzles and the solid propellant itself are not covered, but liquid propellant tanks, pressure vessels and solid propellant cases are within the scope of ISO 16454:2007.

ISO 16454:2007 provides requireme Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16457:2014 - **Identifier:** ISO 16457:2014 _(verified: appears in the quote below)_ - **Item title:** Space systems — Space environment (natural and artificial) — The Earth's ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16457:2022 - **Withdrawn / published date:** 2014-04-10 _(verified: appears in the quote below)_ > 61556,IS,,ISO 16457:2014,Space systems — Space environment (natural and artificial) — The Earth's ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere,Systèmes spatiaux — Environnement spatial (naturel et artificiel) — Guidage sur le modèle de l'ionosphère internationale de référence (IRI) et extensions à la plasmasphère,2014-04-10,1,"['07.060','49.140']",ISO/TC 20/SC 14,9599,[51248],[79476],['en'],15,"

ISO 16457:2014 provides guidance to potential users for the specification of the global distribution of ionosphere densities and temperatures, as well as the total content of electrons in the height interval from 50 km to 1 500 km. It includes Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16462:2004 - **Identifier:** ISO 16462:2004 _(verified: appears in the quote below)_ - **Item title:** Cubic boron nitride inserts, tipped or solid — Dimensions, types _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16462:2014 - **Withdrawn / published date:** 2004-06-22 _(verified: appears in the quote below)_ > 32220,IS,,ISO 16462:2004,"Cubic boron nitride inserts, tipped or solid — Dimensions, types","Plaquettes en nitrure de bore cubique, brasées ou monobloc — Dimensions, types",2004-06-22,1,['25.100.01'],ISO/TC 29/SC 9,9599,,[64173],"['en','fr']",18,"

ISO 16462:2004 applies to inserts with insert shapes in accordance with ISO 883, ISO 3364, ISO 3365 and ISO 6987, tipped with cubic boron nitride (BL, BH, BC) or made of solid cubic boron nitride (BL, BH, BC).

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16463:2004 - **Identifier:** ISO 16463:2004 _(verified: appears in the quote below)_ - **Item title:** Polycristalline diamond inserts, tipped — Dimensions, types _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16463:2014 - **Withdrawn / published date:** 2004-06-15 _(verified: appears in the quote below)_ > 32222,IS,,ISO 16463:2004,"Polycristalline diamond inserts, tipped — Dimensions, types","Plaquettes brasées en diamant polycristallin — Dimensions, types",2004-06-15,1,['25.100.01'],ISO/TC 29/SC 9,9599,,[64174],"['en','fr']",14,"

ISO 16463:2004 applies to inserts with insert shapes in accordance with ISO 883 and ISO 6987, tipped with polycrystalline diamond (DP).

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16467:2003 - **Identifier:** ISO 16467:2003 _(verified: appears in the quote below)_ - **Item title:** Packaging — Transport packages for dangerous goods — Test methods for IBCs _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16495:2013 - **Withdrawn / published date:** 2003-10-14 _(verified: appears in the quote below)_ > 30990,IS,,ISO 16467:2003,Packaging — Transport packages for dangerous goods — Test methods for IBCs,Emballage — Emballages d'expédition de marchandises dangereuses — Méthodes d'essai des grands récipients vrac (GRV),2003-10-14,1,"['13.300','55.020']",ISO/TC 122/SC 3,9599,,[56877],"['en','fr']",31,

ISO 16467:2003 specifies the design type test requirements for Intermediate Bulk Containers (IBCs) intended for use in the transport of dangerous goods.

Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16468:2005 - **Identifier:** ISO 16468:2005 _(verified: appears in the quote below)_ - **Item title:** Investment castings (steel, nickel alloys and cobalt alloys) — General technical requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16468:2015 - **Withdrawn / published date:** 2005-08-08 _(verified: appears in the quote below)_ > 30306,IS,,ISO 16468:2005,"Investment castings (steel, nickel alloys and cobalt alloys) — General technical requirements","Moulages à la cire perdue (acier, alliages de nickel et alliages de cobalt) — Exigences générales techniques",2005-08-08,1,['77.140.80'],ISO/TC 17/SC 11,9599,,[59278],"['en','fr']",13,"

ISO 16468:2005 specifies technical requirements for castings (steel, nickel alloys and cobalt alloys) produced by the investment-casting process.

" Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16468:2015 - **Identifier:** ISO 16468:2015 _(verified: appears in the quote below)_ - **Item title:** Investment castings (steel, nickel alloys and cobalt alloys) — General technical requirements _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16468:2025 - **Withdrawn / published date:** 2015-10-01 _(verified: appears in the quote below)_ > 59278,IS,,ISO 16468:2015,"Investment castings (steel, nickel alloys and cobalt alloys) — General technical requirements","Pièces moulées en cire perdue (acier, alliages de nickel et alliages de cobalt) — Exigences techniques générales",2015-10-01,2,['77.140.80'],ISO/TC 17/SC 11,9599,[30306],[84905],['en'],12,"

ISO 16468:2015 specifies technical requirements for castings (steel, nickel alloys, and cobalt alloys) produced by the investment-casting process. The International Standards specifying metallurgical material requirements for steel, nickel alloy, and cobalt alloy casting grades are listed in the Bibliography.

The requirements stated in ISO 16468:2015 form an integral part of t Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16474-3:2013 - **Identifier:** ISO 16474-3:2013 _(verified: appears in the quote below)_ - **Item title:** Paints and varnishes — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16474-3:2021 - **Withdrawn / published date:** 2013-11-06 _(verified: appears in the quote below)_ > 56831,IS,,ISO 16474-3:2013,Paints and varnishes — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps,Peintures et vernis — Méthodes d'exposition à des sources lumineuses de laboratoire — Partie 3: Lampes fluorescentes UV,2013-11-06,1,['87.040'],ISO/TC 35/SC 9,9599,[37489],[76034],"['en','fr']",16,"

ISO 16474-3:2013 specifies methods for exposing coatings to fluorescent UV lamps, heat and water in apparatus designed to reproduce the weathering effects that occur when materials are exposed in actual end-use environments to daylight, or to daylight through window glass.

The coatings are exposed to different types of fluorescent UV lamps under controlled envir Source: https://isopublicstorageprod.blob.core.windows.net/opendata/_latest/iso_deliverables_metadata/csv/iso_deliverables_metadata.csv ## ISO 16484-1:2010 - **Identifier:** ISO 16484-1:2010 _(verified: appears in the quote below)_ - **Item title:** Building automation and control systems (BACS) — Part 1: Project specification and implementation _(verified: appears in the quote below)_ - **Status code:** 9599 _(verified: appears in the quote below)_ - **Successor:** ISO 16484-1:2024 - **Withdrawn / published date:** 2010-10-27 _(verified: appears in the quote below)_ > 37300,IS,,ISO 16484-1:2010,Building automation and control systems (BACS) — Part 1: Project specification and implementation,Systèmes de gestion technique du bâtiment (SGTB) — Partie 1: Spécification et mise en oeuvre d'un projet,2010-10-27,1,"['35.240.67','91.040.01']",ISO/TC 205,9599,,[84890],"['en','fr']",24,"

ISO 16484-1:2010 specifies guiding principles for project design and implementation and for the integration of other systems into the building automation and control systems (BACS).

ISO 16484-1:2010 specifies the phases required for the BACS project, including: