Withdrawn and superseded ISO standards — page 51 of 246

30452,IS,,ISO 15500-5:2001,Road vehicles — Compressed natural gas (CNG) fuel system components — Part 5: Manual cylinder valve,Véhicules routiers — Composants des systèmes de combustible gaz naturel comprimé (GNC) — Partie 5: Valve manuelle du cylindre,2001-01-18,1,['43.060.40'],ISO/TC 22,9599,,[55423],['en'],4,

55423,IS,,ISO 15500-5:2012,Road vehicles — Compressed natural gas (CNG) fuel system components — Part 5: Manual cylinder valve,Véhicules routiers — Composants des systèmes de combustible gaz naturel comprimé (GNC) — Partie 5: Valve manuelle du cylindre,2012-04-04,2,['43.060.40'],ISO/TC 22/SC 41,9599,[30452],[75989],['en'],4,"<p>This part of ISO 15500 specifies tests and requirements for the manual cylinder valve, a compressed natural gas (CNG) fuel system component intended for use on the types of motor vehicles defined in ISO 3833.</p><p>This part of ISO 15500 is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using natural gas in accordance with ISO 15403.</p><p>It is

67824,IS,Amd,ISO 15500-5:2012/Amd 1:2016,Road vehicles — Compressed natural gas (CNG) fuel system components — Part 5: Manual cylinder valve — Amendment 1,Véhicules routiers — Composants des systèmes de combustible gaz naturel comprimé (GNC) — Partie 5: Valve manuelle du cylindre — Amendement 1,2016-03-23,2,['43.060.40'],ISO/TC 22/SC 41,9599,,[75989],['en'],2,

30453,IS,,ISO 15500-6:2001,Road vehicles — Compressed natural gas (CNG) fuel system components — Part 6: Automatic valve,Véhicules routiers — Composants des systèmes de combustible gaz naturel comprimé (GNC) — Partie 6: Valve automatique,2001-01-18,1,['43.060.40'],ISO/TC 22,9599,,[51562],['en'],4,

51562,IS,,ISO 15500-6:2012,Road vehicles — Compressed natural gas (CNG) fuel system components — Part 6: Automatic valve,Véhicules routiers — Composants des systèmes de combustible gaz naturel comprimé (GNC) — Partie 6: Valve automatique,2012-04-04,2,['43.060.40'],ISO/TC 22/SC 41,9599,[30453],[75990],['en'],5,"<p>This part of ISO 15500 specifies tests and requirements for the automatic valve, a compressed natural gas</p><p>(CNG) fuel system component intended for use on the types of motor vehicles defined in ISO 3833.</p><p>This part of ISO 15500 is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using natural gas</p><p>in accordance with ISO 15403.</p><p>It is not appl

67825,IS,Amd,ISO 15500-6:2012/Amd 1:2016,Road vehicles — Compressed natural gas (CNG) fuel system components — Part 6: Automatic valve — Amendment 1,Véhicules routiers — Composants des systèmes de combustible gaz naturel comprimé (GNC) — Partie 6: Valve automatique — Amendement 1,2016-03-23,2,['43.060.40'],ISO/TC 22/SC 41,9599,,[75990],['en'],2,

30455,IS,,ISO 15500-7:2002,Road vehicles — Compressed natural gas (CNG) fuel system components — Part 7: Gas injector,Véhicules routiers — Composants des systèmes de combustible gaz naturel comprimé (GNC) — Partie 7: Injecteur de gaz,2002-09-19,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[60256],['en'],5,"<p>This part of ISO 15500 provides tests and requirements for the gas injector, a compressed natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833.</p><p>This part of ISO 15550 is applicable to vehicles using natural gas in accordance with ISO 15403 (mono-fuel, bi-fuel or dual-fuel applications). It is not applicable to injectors intended for high-p

30456,IS,,ISO 15500-8:2001,Road vehicles — Compressed natural gas (CNG) fuel system components — Part 8: Pressure indicator,Véhicules routiers — Composants des systèmes de combustible gaz naturel comprimé (GNC) — Partie 8: Indicateur de pression,2001-01-18,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[60283],['en'],4,

30457,IS,,ISO 15500-9:2001,Road vehicles — Compressed natural gas (CNG) fuel system components — Part 9: Pressure regulator,Véhicules routiers — Composants des systèmes de combustible gaz naturel comprimé (GNC) — Partie 9: Régulateur de pression,2001-01-18,1,['43.060.40'],ISO/TC 22,9599,,[51561],['en'],5,

51561,IS,,ISO 15500-9:2012,Road vehicles — Compressed natural gas (CNG) fuel system components — Part 9: Pressure regulator,Véhicules routiers — Composants des systèmes de combustible gaz naturel comprimé (GNC) — Partie 9: Régulateur de pression,2012-04-04,2,['43.060.40'],ISO/TC 22/SC 41,9599,[30457],[75991],['en'],6,"<p>ISO 15500-9:2012 specifies tests and requirements for the pressure regulator, a compressed natural gas (CNG) fuel system component intended for use on the types of motor vehicles defined in ISO 3833.</p><p>ISO 15500-9:2012 is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using natural gas in accordance with ISO 15403. </p><p>It is not applicable to th

67826,IS,Amd,ISO 15500-9:2012/Amd 1:2016,Road vehicles — Compressed natural gas (CNG) fuel system components — Part 9: Pressure regulator — Amendment 1,Véhicules routiers — Composants des systèmes de combustible gaz naturel comprimé (GNC) — Partie 9: Régulateur de pression — Amendement 1,2016-03-23,2,['43.060.40'],ISO/TC 22/SC 41,9599,,[75991],['en'],2,

27443,IS,,ISO 15501-1:2001,Road vehicles — Compressed natural gas (CNG) fuel systems — Part 1: Safety requirements,Véhicules routiers — Systèmes d'alimentation en gaz naturel comprimé (GNC) — Partie 1: Exigences de sécurité,2001-10-25,1,['43.060.40'],ISO/TC 22,9599,,[51555],"['en','fr']",9,

51555,IS,,ISO 15501-1:2012,Road vehicles — Compressed natural gas (CNG) fuel systems — Part 1: Safety requirements,Véhicules routiers — Systèmes d'alimentation en gaz naturel comprimé (GNC) — Partie 1: Exigences de sécurité,2012-03-29,2,['43.060.40'],ISO/TC 22/SC 41,9599,[27443],[68375],['en'],11,

68375,IS,,ISO 15501-1:2016,Road vehicles — Compressed natural gas (CNG) fuel systems — Part 1: Safety requirements,Véhicules routiers — Systèmes d'alimentation en gaz naturel comprimé (GNC) — Partie 1: Exigences de sécurité,2016-11-08,3,['43.060.40'],ISO/TC 22/SC 41,9599,[51555],[86567],['en'],13,"<p>ISO 15501-1:2016 specifies the minimum safety requirements applicable for the functionality of CNG on-board fuel systems intended for use on the types of motor vehicles defined in ISO 3833. This document is applicable to vehicles using compressed natural gas in accordance with ISO 15403, including mono-fuel, bi-fuel or dual-fuel applications, original-production and converted vehicles.</p><p>All

77230,IS,Amd,ISO 15501-1:2016/Amd 1:2021,Road vehicles — Compressed natural gas (CNG) fuel systems — Part 1: Safety requirements — Amendment 1,Véhicules routiers — Systèmes d'alimentation en gaz naturel comprimé (GNC) — Partie 1: Exigences de sécurité — Amendement 1,2021-01-04,3,['43.060.40'],ISO/TC 22/SC 41,9599,,[86567],['en'],3,

28270,IS,,ISO 15501-2:2001,Road vehicles — Compressed natural gas (CNG) fuel systems — Part 2: Test methods,Véhicules routiers — Systèmes d'alimentation en gaz naturel comprimé (GNC) — Partie 2: Méthodes d'essai,2001-06-28,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[68369],"['en','fr']",8,

68369,IS,,ISO 15501-2:2016,Road vehicles — Compressed natural gas (CNG) fuel systems — Part 2: Test methods,Véhicules routiers — Systèmes d'alimentation en gaz naturel comprimé (GNC) — Partie 2: Méthodes d'essai,2016-11-08,2,['43.060.40'],ISO/TC 22/SC 41,9599,[28270],[86585],['en'],9,<p>ISO 15501-2:2016 specifies the test methods for checking the minimum safety requirements specified in ISO 15501‑1. It is applicable to the functionality of the fuel systems designed to operate on compressed natural gas of motor vehicles as defined in ISO 3833.</p>

27428,IS,,ISO 15502:2005,Household refrigerating appliances — Characteristics and test methods,Appareils de réfrigération à usage ménager — Caractéristiques et méthodes d'essai,2005-10-19,1,['97.040.30'],ISO/TC 86,9599,"[11158,15823,22646,14060,22645,27284,15278]",[45811],"['en','fr']",81,"<p>ISO 15502:2005 specifies the essential characteristics of household refrigerating appliances, factory-assembled and cooled by internal natural convection or forced air circulation, and establishes test methods for checking the characteristics.</p>"

45432,IS,Cor,ISO 15502:2005/Cor 1:2007,Household refrigerating appliances — Characteristics and test methods — Technical Corrigendum 1,Appareils de réfrigération à usage ménager — Caractéristiques et méthodes d'essai — Rectificatif technique 1,2007-02-14,1,['97.040.30'],ISO/TC 86,9599,,[45811],['en'],4,

27332,IS,,ISO 15509:2001,Adhesives — Determination of the bond strength of engineering-plastic joints,Adhésifs — Détermination de la résistance de joints collés des plastiques industriels,2001-08-09,1,['83.180'],ISO/TC 61/SC 11,9599,,[75591],['en'],8,

43159,IS,,ISO 15510:2010,Stainless steels — Chemical composition,Aciers inoxydables — Composition chimique,2010-12-13,1,['77.140.20'],ISO/TC 17/SC 4,9599,[33025],[61187],['en'],51,"<p>ISO 15510:2010 lists the chemical compositions of stainless steels agreed by ISO/TC 17/SC 4, mainly on the basis of a composition of the specifications in existing ISO, ASTM, EN, JIS and GB (Chinese) standards. They apply to all wrought product forms, including ingots and semi-finished material.</p>"

27979,IS,,ISO 15511:2003,Information and documentation — International Standard Identifier for Libraries and Related Organizations (ISIL),Information et documentation — Identifiant international normalisé pour les bibliothèques et les organismes apparentés (ISIL),2003-12-15,1,['35.240.30'],ISO/TC 46/SC 4,9599,,[52666],"['en','fr']",5,<p>The purpose of ISO 15511:2003 is to define and promote the use of a set of standard identifiers for the unique identification of libraries and related organizations with a minimum impact on already existing systems.</p>

52666,IS,,ISO 15511:2009,Information and documentation — International standard identifier for libraries and related organizations (ISIL),Information et documentation — Identifiant international normalisé pour les bibliothèques et les organismes apparentés (ISIL),2009-10-19,2,['35.240.30'],ISO/TC 46/SC 4,9599,[27979],[57332],['en'],7,"<p>ISO 15511:2009 specifies the International Standard identifier for libraries and related organizations (ISIL) which comprises a set of standard identifiers used for the unique identification of libraries, archives, museums and related organizations with a minimum impact on already existing systems. </p><p>An ISIL identifies an organization, i.e. a library, a

57332,IS,,ISO 15511:2011,Information and documentation — International standard identifier for libraries and related organizations (ISIL),Information et documentation — Identifiant international normalisé pour les bibliothèques et les organismes apparentés (ISIL),2011-08-22,3,['35.240.30'],ISO/TC 46/SC 4,9599,[52666],[77849],"['en','fr']",8,"<p>ISO 15511:2011 specifies the International Standard identifier for libraries and related organizations (ISIL), which comprises a set of standard identifiers used for the unique identification of libraries, archives, museums and related organizations with a minimum impact on already existing systems.</p><p>An ISIL identifies an organization, i.e. a lib

27994,IS,,ISO 15512:1999,Plastics — Determination of water content,Plastiques — Dosage de l'eau,1999-07-22,1,['83.080.01'],ISO/TC 61/SC 5,9599,"[12447,5387]",[41662],"['en','fr']",12,

41662,IS,,ISO 15512:2008,Plastics — Determination of water content,Plastiques — Dosage de l'eau,2008-05-07,2,['83.080.01'],ISO/TC 61/SC 5,9599,[27994],[62249],"['en','fr','ru']",16,"<p>ISO 15512:2008 specifies methods for the determination of the water content of plastics in the form of granules and finished articles. These methods do not test for water absorption (kinetics and equilibrium) of plastics as measured by ISO 62. The methods are suitable for the determination of water content as low as the following levels:</p><ul><li> Method A 0,1 % or better;</li><li> Method B 0,01 % or better;</li><li> Method C 0,01 % or better.</li></ul><p>Three alternat

62249,IS,,ISO 15512:2014,Plastics — Determination of water content,Plastiques — Dosage de l'eau,2014-09-16,3,['83.080.01'],ISO/TC 61/SC 5,9599,[41662],[70025],"['en','fr']",25,"<p>ISO 15512:2014 specifies methods for the determination of the water content of plastics in the form of powder, granules, and finished articles. These methods do not test for water absorption (kinetics and equilibrium) of plastics as measured by ISO 62.</p><p>Method A is suitable for the determination of water content as low as 0,1 % with an accuracy of 0,1 %. Method B and Method C are suitable for the determination of water content as low as 0,01 % with an accuracy of 0,01 %.</p>"

70025,IS,,ISO 15512:2016,Plastics — Determination of water content,Plastiques — Dosage de l'eau,2016-10-06,4,['83.080.01'],ISO/TC 61/SC 5,9599,[62249],[73834],"['en','fr']",25,"<p><b>1.1</b> ISO 15512:2016 specifies methods for the determination of the water content of plastics in the form of powder, granules, and finished articles. These methods do not test for water absorption (kinetics and equilibrium) of plastics as measured by ISO 62.</p><p>Method A is suitable for the determination of water content as low as 0,1 % with an accuracy of 0,1 %. Method B and Method C are suitable for the determination of water content as low as 0,01 % with an accuracy of 0,01 %.</p><p>Water content is a

43216,IS,,ISO 15527:2007,"Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods","Plastiques — Plaques moulées par compression en polyéthylène (PE-UHMW, PE-HD) — Exigences et méthodes d'essai",2007-10-02,1,['83.140.10'],ISO/TC 61/SC 11,9599,,[54743],"['en','fr']",11,<p>ISO 15527:2007 specifies the requirements and test methods for solid flat compression-moulded sheets of polyethylene (PE‑UHMW and PE‑HD) without fillers or reinforcing materials. It applies only to thicknesses from 10 mm to 200 mm.</p>

54743,IS,,ISO 15527:2010,"Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods","Plastiques — Plaques moulées par compression en polyéthylène (PE-UHMW, PE-HD) — Exigences et méthodes d'essai",2010-09-22,2,['83.140.10'],ISO/TC 61/SC 11,9599,[43216],[70309],"['en','fr','ru']",10,<p>ISO 15527:2010 specifies the requirements and test methods for solid flat compression-moulded sheets of polyethylene (PE‑UHMW and PE‑HD) without fillers or reinforcing materials. It applies only to thicknesses from 10 mm to 200 mm.</p>

70309,IS,,ISO 15527:2018,"Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods","Plastiques — Plaques moulées par compression en polyéthylène (PE-UHMW, PE-HD) — Exigences et méthodes d'essai",2018-10-31,3,['83.140.10'],ISO/TC 61/SC 11,9599,[54743],[80208],"['en','fr']",11,"<p>This document specifies the requirements and test methods for solid flat compression-moulded sheets of polyethylene (PE-UHMW and PE-HD, see ISO 1043-1) without fillers or reinforcing materials. It applies only to thicknesses from 10 mm to 200 mm.</p>"

28129,IS,,ISO 15528:2000,"Paints, varnishes and raw materials for paints and varnishes — Sampling","Peintures, vernis et matières premières pour peintures et vernis — Échantillonnage",2000-08-17,1,['87.040'],ISO/TC 35/SC 9,9599,"[5213,6101]",[56809],"['en','fr']",15,

56809,IS,,ISO 15528:2013,"Paints, varnishes and raw materials for paints and varnishes — Sampling","Peintures, vernis et matières premières pour peintures et vernis — Échantillonnage",2013-08-20,2,['87.040'],ISO/TC 35/SC 9,9599,[28129],[77808],"['en','fr','ru']",12,"<p>ISO 15528:2013 specifies procedures for the sampling of paints, varnishes and raw materials used in their manufacture. Such products include liquids and materials which, without undergoing chemical modification, are capable of being liquefied when heated up, and powdered, granulated and pasty materials. Samples may be taken from containers, e.g. cans, drums, tanks, tank wagons or ships' tanks, as well as from barrels, sacks, b

28136,IS,,ISO 15529:1999,Optics and optical instruments — Optical transfer function — Principles of measurement of modulation transfer function (MTF) of sampled imaging systems,Optique et instruments d'optique — Fonction de transfert optique — Principes de mesurage de la fonction de transfert de modulation (MTF) des systèmes de formation d'image échantillonnés,1999-08-12,1,['17.180.01'],ISO/TC 172/SC 1,9599,,[40748],"['en','fr']",17,

40748,IS,,ISO 15529:2007,Optics and photonics — Optical transfer function — Principles of measurement of modulation transfer function (MTF) of sampled imaging systems,Optique et photonique — Fonction de transfert optique — Principes de mesure de la fonction de transfert de modulation (MTF) des systèmes de formation d'image échantillonnés,2007-09-13,2,['17.180.01'],ISO/TC 172/SC 1,9599,[28136],[56069],"['en','fr']",25,"<p>ISO 15529:2007 specifies the principal MTFs associated with a sampled imaging system, together with related terms and outlines a number of suitable techniques for measuring these MTFs. It also defines a measure for the “aliasing” related to imaging with such systems.</p><p>I

50846,IS,,ISO 15531-44:2010,Industrial automation systems and integration — Industrial manufacturing management data — Part 44: Information modelling for shop floor data acquisition,Systèmes d'automatisation industrielle et intégration — Données de gestion de fabrication industrielle — Partie 44: Modélisation de l'information de gestion de fabrication pour l'acquisition des données d'atelier,2010-12-07,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[71064],"['en','fr']",40,"<p>ISO 15531-44:2010 provides models for the representation of data that are captured from the manufacturing control level, and stored and handled at the manufacturing management level for any purpose (e.g. quality, statistics, ma

27579,IS,,ISO 15535:2003,General requirements for establishing anthropometric databases,Exigences générales pour la création de bases de données anthropométriques,2003-05-14,1,['13.180'],ISO/TC 159/SC 3,9599,,[44067],"['en','fr']",20,"<p>ISO 15535:2003 specifies general requirements for anthropometric databases and their associated reports that contain measurements taken in accordance with ISO 7250.</p><p>It provides necessary information, such as characteristics of the user population, sampling methods, measurement items and statistics, to make international comparison possible among various population segments. The population segments specified in ISO 15535:2003 are people who are able to

44067,IS,,ISO 15535:2006,General requirements for establishing anthropometric databases,Exigences générales pour la création de bases de données anthropométriques,2006-11-22,2,['13.180'],ISO/TC 159/SC 3,9599,[27579],[57179],"['en','fr']",20,"<p>ISO 15535:2006 specifies general requirements for anthropometric databases and their associated reports that contain measurements taken in accordance with ISO 7250. It provides necessary information, such as characteristics of the user population, sampling methods, measurement items and statistics, to make international comparison possible among various population segments. The population segments specified in ISO 15535:2006 are people who are able to

57179,IS,,ISO 15535:2012,General requirements for establishing anthropometric databases,Exigences générales pour la création de bases de données anthropométriques,2012-09-28,3,['13.180'],ISO/TC 159/SC 3,9599,[44067],[82541],"['en','fr']",22,"<p>ISO 15535:2012 specifies general requirements for anthropometric databases and their associated reports that contain measurements taken in accordance with ISO 7250-1.It provides necessary information, such as characteristics of the user population, sampling methods, measurement items and statistics, to make international comparison possible among various population segments.</p>"

27581,IS,,ISO 15537:2004,Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs,Principes de choix et d'utilisation de sujets d'essai pour l'essai des aspects anthropométriques des produits industriels et leur conception,2004-11-17,1,"['13.180','13.110']",ISO/TC 159/SC 3,9599,,[79174],"['en','fr']",11,"<p>ISO 15537:2004 establishes methods for determining the composition of groups of persons whose anthropometric characteristics are to be representative of the intended user population of any specific object under test.</p><p>ISO 15537:2004 is applicable to the testing of anthropometric aspects of industrial products and designs h

28157,IS,,ISO 15540:1999,Ships and marine technology — Fire resistance of hose assemblies — Test methods,Navires et technologie marine — Résistance au feu des tuyauteries — Méthodes d'essais,1999-08-12,1,"['83.140.40','47.020.30']",ISO/TC 8/SC 3,9599,,[67285],['en'],5,

33182,IS,Cor,ISO 15540:1999/Cor 1:1999,Ships and marine technology — Fire resistance of hose assemblies — Test methods — Technical Corrigendum 1,Navires et technologie marine — Résistance au feu des tuyauteries — Méthodes d'essais — Rectificatif technique 1,1999-11-25,1,"['83.140.40','47.020.30']",ISO/TC 8/SC 3,9599,,[67285],['en'],1,

28158,IS,,ISO 15541:1999,Ships and marine technology — Fire resistance of hose assemblies — Requirements for the test bench,Navires et technologie marine — Résistance au feu des tuyauteries — Exigences du banc d'essai,1999-08-12,1,"['83.140.40','47.020.30']",ISO/TC 8/SC 3,9599,,[67286],['en'],7,

27091,IS,,ISO 15544:2000,Petroleum and natural gas industries — Offshore production installations — Requirements and guidelines for emergency response,Industries du pétrole et du gaz naturel — Installations de production en mer — Exigences et lignes directrices pour les interventions d'urgence,2000-10-12,1,['75.180.10'],ISO/TC 67/SC 6,9599,,[82437],"['en','fr']",43,"<p>This International Standard describes objectives, functional requirements and guidelines for emergency response</p><p>(ER) measures on installations used for the development of offshore hydrocarbon resources. It is applicable to</p><p>fixed offshore structures or floating production, storage and off-take systems.</p><p>NOTE Fo

46484,IS,Amd,ISO 15544:2000/Amd 1:2009,Petroleum and natural gas industries — Offshore production installations — Requirements and guidelines for emergency response — Amendment 1,Industries du pétrole et du gaz naturel — Installations de production en mer — Exigences et lignes directrices pour les interventions d'urgence — Amendement 1,2009-04-16,1,['75.180.10'],ISO/TC 67/SC 6,9599,,[82437],"['en','fr']",2,

28174,IS,,ISO 15546:2002,Petroleum and natural gas industries — Aluminium alloy drill pipe,Industries du pétrole et du gaz naturel — Tige de forage en alliage d'aluminium,2002-12-06,1,"['77.150.10','75.180.10']",ISO/TC 67,9599,,[45012],"['en','fr']",26,"<p>ISO 15546:2002 specifies the technical delivery condition, manufacturing process, material requirements, configuration and dimensions, and verification and inspection procedures for aluminium alloy drill pipes with or without attached steel tool joints for use in drilling and production operations in the petroleum and natural gas industries. </p>"

45012,IS,,ISO 15546:2007,Petroleum and natural gas industries — Aluminium alloy drill pipe,Industries du pétrole et du gaz naturel — Tige de forage en alliage d'aluminium,2007-05-07,2,"['77.150.10','75.180.10']",ISO/TC 67,9599,[28174],[52740],"['en','fr','ru']",29,"<p>ISO 15546:2007 specifies the technical delivery condition, manufacturing process, material requirements, configuration and dimensions, and verification and inspection procedures for aluminium alloy drill pipes with or without attached steel tool joints for use in drilling and production operations in the petroleum and natural gas industries.</p>"

28173,IS,,ISO 15547:2000,Petroleum and natural gas industries — Plate heat exchangers,Industries du pétrole et du gaz naturel — Échangeurs thermiques à plaques,2000-04-13,1,"['27.060.30','75.180.20']",ISO/TC 67/SC 6,9599,,"[37293,35105,37294]","['en','fr']",26,

43739,IS,,ISO 15548-1:2008,Non-destructive testing — Equipment for eddy current examination — Part 1: Instrument characteristics and verification,Essais non destructifs — Appareillage pour examen par courants de Foucault — Partie 1: Caractéristiques de l'appareil et vérifications,2008-09-09,1,['19.100'],ISO/TC 135/SC 4,9599,,[62836],"['en','fr']",29,"<p>ISO 15548-1:2008 identifies the functional characteristics of a general-purpose eddy current instrument and provides methods for their measurement and verification.</p><p>The evaluation of these characteristics permits a well-defined description and comparability of eddy current equipment.</p><p>By careful choice of the characteristics, a con

55916,IS,Cor,ISO 15548-1:2008/Cor 1:2010,Non-destructive testing — Equipment for eddy current examination — Part 1: Instrument characteristics and verification — Technical Corrigendum 1,Essais non destructifs — Appareillage pour examen par courants de Foucault — Partie 1: Caractéristiques de l'appareil et vérifications — Rectificatif technique 1,2010-02-23,1,['19.100'],ISO/TC 135/SC 4,9599,,[62836],"['en','fr']",1,

62836,IS,,ISO 15548-1:2013,Non-destructive testing — Equipment for eddy current examination — Part 1: Instrument characteristics and verification,Essais non destructifs — Appareillage pour examen par courants de Foucault — Partie 1: Caractéristiques de l'appareil et vérifications,2013-11-20,2,['19.100'],ISO/TC 135/SC 4,9599,"[55916,43739]",[87406],"['en','fr']",28,"<p>ISO 15548-1:2013 identifies the functional characteristics of a general-purpose eddy current instrument and provides methods for their measurement and verification.</p><p>The evaluation of these characteristics permits a well-defined description and comparability of eddy current equipment.</p><p>By careful choice of the charact

43740,IS,,ISO 15548-2:2008,Non-destructive testing — Equipment for eddy current examination — Part 2: Probe characteristics and verification,Essais non destructifs — Appareillage pour examen par courants de Foucault — Partie 2: Caractéristiques des capteurs et vérifications,2008-09-09,1,['19.100'],ISO/TC 135/SC 4,9599,,[62837],"['en','fr']",28,"<p>ISO 15548-2:2008 identifies the functional characteristics of a probe and its interconnecting elements and provides methods for their measurement and verification.</p><p>The evaluation of these characteristics permits a well-defined description and comparability of eddy current equipment.</p><p>By careful choice of the characteristics, a consistent

43737,IS,,ISO 15549:2008,Non-destructive testing — Eddy current testing — General principles,Essais non destructifs — Contrôle par courants de Foucault — Principes généraux,2008-07-16,1,['19.100'],ISO/TC 135/SC 4,9599,,[75550],"['en','fr','ru']",8,<p>ISO 15549:2008 defines the general principles to be applied to non-destructive eddy current examination of products and materials in order to ensure defined and repeatable performance.</p><p>It includes guidelines for the preparation of application documents which describe the specific requirements for the application of the eddy current method to a particular type of product.</p>

28185,IS,,ISO 15550:2002,Internal combustion engines — Determination and method for the measurement of engine power — General requirements,Moteurs à combustion interne — Détermination et méthode de mesure de la puissance du moteur — Exigences générales,2002-05-30,1,['27.020'],ISO/TC 70,9599,,[70030],"['en','fr']",46,"<p>ISO 15550 establishes the framework for ISO engine power measurement standards. It specifies standard reference conditions and methods of declaring the power, fuel consumption, lubricating oil consumption and test methods for internal combustion engines in commercial production using liquid or gaseous fuels.</p><p>ISO 15550 applies to reciprocating internal combustion engines

55442,IS,,ISO 15551-1:2015,Petroleum and natural gas industries — Drilling and production equipment — Part 1: Electric submersible pump systems for artificial lift,Industries du pétrole et du gaz naturel — Équipement de forage et de production — Partie 1: Systèmes électriques de pompes submersibles pour l'ascension artificielle,2015-05-06,1,['75.180.10'],ISO/TC 67/SC 4,9599,,[79589],['en'],121,"<p>ISO 15551-1:2015 provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings, functional evaluations, handling, and storage of tubing-deployed electrical submersible pump (ESP) systems as defined herein. This part of ISO 15551 is app

26284,IS,,ISO 15552:2004,"Pneumatic fluid power — Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm — Basic, mounting and accessories dimensions","Transmissions pneumatiques — Vérins avec fixations détachables, série 1 000 kPa (10 bar), alésages de 32 mm à 320 mm — Dimensions de base, des fixations et des accessoires",2004-02-02,1,['23.100.20'],ISO/TC 131/SC 3,9599,[12786],[66921],"['en','fr']",18,"<p>ISO 15552:2004 established a metric series of basic, mounting and accessories dimensions as required for interchangeability of single- or double-rod pneumatic cylinders, with or without provision for magnetic sensors for a maximum rated pressure of 1 00

28203,IS,,ISO 15554:1998,Practice for dosimetry in gamma irradiation facilities for food processing,Pratique de la dosimétrie dans les installations de traitement des produits alimentaires par irradiation gamma,1998-12-20,1,"['17.240','67.020']",ISO/TC 85,9599,,[33566],['en'],6,

28204,IS,,ISO 15555:1998,Practice for use of a ceric-cerous sulfate dosimetry system,Pratique de l'utilisation d'un système dosimétrique de mesure au sulfate (cérique-céreux),1998-12-20,1,['17.240'],ISO/TC 85,9599,,[33568],['en'],8,

28202,IS,,ISO 15556:1998,Guide for selection and calibration of dosimetry systems for radiation processing,Guide de choix et d'étalonnage des appareils de mesure dosimétrique pour le traitement par irradiation,1998-12-20,1,['17.240'],ISO/TC 85,9599,,[33569],['en'],12,

28205,IS,,ISO 15557:1998,Practice for use of a radiochromic film dosimetry system,Pratique de l'utilisation d'un système dosimétrique à film radiochromique,1998-12-20,1,['17.240'],ISO/TC 85,9599,,[33570],['en'],5,

28206,IS,,ISO 15558:1998,Practice for use of a polymethylmethacrylate dosimetry system,Pratique de l'utilisation d'un système dosimétrique au polyméthylméthacrylate,1998-12-20,1,['17.240'],ISO/TC 85,9599,,[33554],['en'],7,

28207,IS,,ISO 15559:1998,Practice for use of a radiochromic optical waveguide dosimetry system,Pratique de l'utilisation d'un système dosimétrique à guide d'ondes optique radiochromique,1998-12-20,1,['17.240'],ISO/TC 85,9599,,[33571],['en'],5,

28208,IS,,ISO 15560:1998,Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory,Pratique de caractérisation et d'exploitation d'un laboratoire d'étalonnage de dosimétrie d'irradiations à hautes doses,1998-12-20,1,['17.240'],ISO/TC 85,9599,,[33555],['en'],9,

28209,IS,,ISO 15561:1998,Practice for use of a dichromate dosimetry system,Utilisation d'un système de mesure dosimétrique au dichromate,1998-12-20,1,['17.240'],ISO/TC 85,9599,,[33556],['en'],6,

28210,IS,,ISO 15562:1998,Practice for dosimetry in electron and bremsstrahlung irradiation facilities for food processing,Pratique de la dosimétrie électrons et Bremsstrahlung dans les installations de traitement des produits alimentaires irradiés,1998-12-20,1,"['17.240','67.020']",ISO/TC 85,9599,,[33572],['en'],6,

28211,IS,,ISO 15563:1998,Practice for use of the ethanol-chlorobenzene dosimetry system,Pratique de l'utilisation d'un système dosimétrique à l'éthanol chlorobenzène,1998-12-20,1,['17.240'],ISO/TC 85,9599,,[33573],['en'],9,

28212,IS,,ISO 15564:1998,Guide for use of radiation-sensitive indicators,Guide pour l'utilisation d'indicateurs sensibles aux rayonnements,1998-12-20,1,['17.240'],ISO/TC 85,9599,,[33574],['en'],2,

28213,IS,,ISO 15565:1998,Practice for use of a radiochromic liquid dosimetry system,Pratique de l'utilisation d'un système dosimétrique radiochromique liquide,1998-12-20,1,['17.240'],ISO/TC 85,9599,,[33575],['en'],7,

28214,IS,,ISO 15566:1998,Practice for use of the alanine-EPR dosimetriy system,Pratique de l'utilisation d'un système dosimétrique à l'alanine utilisant la résonance paramagnétique électronique,1998-12-20,1,['17.240'],ISO/TC 85,9599,,[33576],['en'],6,

28215,IS,,ISO 15567:1998,Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing,Pratique de la dosimétrie dans une installation de traitement de produits alimentaires par des rayons X (Bremsstrahlung),1998-12-20,1,['17.240'],ISO/TC 85,9599,,[33577],['en'],10,

28216,IS,,ISO 15568:1998,Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations,Pratique de l'utilisation de systèmes dosimétriques calorimétriques pour des mesures de dose délivrée par un faisceau d'électrons et l'étalonnage de dosimètres,1998-12-20,1,['17.240'],ISO/TC 85,9599,,[33557],['en'],8,

28217,IS,,ISO 15569:1998,Practice for dosimetry in an electron-beam facility for radiation processing at energies between 300 keV and 25 MeV,Pratique de la dosimétrie utilisant des faisceaux d'énergie comprise entre 300 keV et 25 MeV,1998-12-20,1,['17.240'],ISO/TC 85,9599,,[33558],['en'],19,

28218,IS,,ISO 15570:1998,Practice for use of cellulose acetate dosimetry system,Pratique de l'utilisation d'un système dosimétrique de mesure à l'acétate de cellulose,1998-12-20,1,['17.240'],ISO/TC 85,9599,,[33578],['en'],8,

28219,IS,,ISO 15571:1998,Practice for dosimetry in a gamma irradiation facility for radiation processing,Pratique de la dosimétrie dans une installation de traitement par irradiation gamma,1998-12-20,1,['17.240'],ISO/TC 85,9599,,[33559],['en'],7,

28220,IS,,ISO 15572:1998,Guide for estimating uncertainties in dosimetry for radiation processing,Guide pour l'estimation des incertitudes en dosimétrie pour le traitement par irradiation,1998-12-20,1,['17.240'],ISO/TC 85,9599,,[33560],['en'],20,

28221,IS,,ISO 15573:1998,Practice for dosimetry in an electron-beam facility for radiation processing at energies between 80 keV and 300 keV,Pratique de la dosimétrie de faisceaux d'électrons pour irradiations à des énergies comprises entre 80 keV et 300 keV,1998-12-20,1,['17.240'],ISO/TC 85,9599,,[33561],['en'],7,

28229,IS,,ISO 15579:2000,Metallic materials — Tensile testing at low temperature,Matériaux métalliques — Essai de traction à basse température,2000-06-08,1,['77.040.10'],ISO/TC 164/SC 1,9599,,[51532],"['en','fr']",15,

41133,IS,,ISO 15585:2006,Hard coal — Determination of caking index,Houille — Détermination de l'indice d'agglutination,2006-01-18,1,['73.040'],ISO/TC 27/SC 5,9599,,[70839],"['en','ru']",11,"<p>ISO 15585:2006 specifies a method of determination of caking index of hard coal. It is applicable to the evaluation of caking power of bituminous coal with random vitrinite reflectance greater than 0,6 % and less than or equal to 1,8 %.</p>"

33269,IS,,ISO 15589-1:2003,Petroleum and natural gas industries — Cathodic protection of pipeline transportation systems — Part 1: On-land pipelines,Industries du pétrole et du gaz naturel — Protection cathodique des systèmes de transport par conduites — Partie 1: Conduites terrestres,2003-11-06,1,['75.200'],ISO/TC 67/SC 2,9599,,[54503],['en'],40,"<p>ISO 15589-1:2003 specifies requirements and gives recommendations for the pre-installation surveys, design, materials, equipment, fabrication, installation, commissioning, operation, inspection and maintenance of cathodic protection systems for on-land pipelines, as defined in ISO 13623, for the petroleum and natural gas industries.</p><p>ISO 15

54503,IS,,ISO 15589-1:2015,"Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines","Industries du pétrole, de la pétrochimie et du gaz naturel — Protection cathodique des systèmes de transport par conduites — Partie 1: Conduites terrestres",2015-03-02,2,['75.200'],ISO/TC 67/SC 2,9599,[33269],"[83011,86820]","['en','fr']",80,"<p>ISO 15589-1:2015 specifies requirements and gives recommendations for the pre-installation surveys, design, materials, equipment, installation, commissioning, operation, inspection, and maintenance of cathodic protection systems for on-land pipelines, as defined in ISO 13623 or EN 14161 for the petrol

33270,IS,,ISO 15589-2:2004,Petroleum and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines,Industries du pétrole et du gaz naturel — Protection cathodique des systèmes de transport par conduites — Partie 2: Conduites en mer,2004-05-05,1,['75.200'],ISO/TC 67/SC 2,9599,,[51992],['en'],54,"<p>ISO 15589-2:2004 specifies requirements and gives recommendations for the pre-installation surveys, design, materials, equipment, fabrication, installation, commissioning, operation, inspection and maintenance of cathodic protection systems for offshore pipelines for the petroleum and natural gas industries as defined in ISO 13623.</p><p>ISO 15589-

51992,IS,,ISO 15589-2:2012,"Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines","Industries du pétrole, de la pétrochimie et du gaz naturel — Protection cathodique des systèmes de transport par conduites — Partie 2: Conduites en mer",2012-12-04,2,['75.200'],ISO/TC 67/SC 2,9599,[33270],[80267],"['en','fr']",59,"<p>ISO 15589-2:2012 specifies requirements and gives recommendations for the pre-installation surveys, design, materials, equipment, fabrication, installation, commissioning, operation, inspection and maintenance of cathodic protection systems for offshore pipelines for the petroleum, petrochemical a

6147,IS,,ISO 1559:1978,Alloy for dental amalgam,Alliage pour amalgame dentaire,1978-11-01,1,['11.060.10'],ISO/TC 106/SC 1,9599,,"[6149,6148]","['en','fr']",3,

6148,IS,,ISO 1559:1986,Dentistry — Alloys for dental amalgam,Art dentaire — Alliages pour amalgame dentaire,1986-06-12,2,['11.060.10'],ISO/TC 106/SC 1,9599,[6147],[6149],"['en','fr']",4,

6149,IS,,ISO 1559:1995,Dental materials — Alloys for dental amalgam,Produits dentaires — Alliages pour amalgame dentaire,1995-12-14,3,['11.060.10'],ISO/TC 106/SC 1,9599,"[6147,6148]",[37112],"['en','fr']",6,"<p>Specifies requirements and test methods for alloys composed mainly of silver, tin and copper. The alloy may be in either powder or tablet form, or in capsules with portions of alloy and mercury predosed by the manufacturer, suitable for the preparation of dental amalgam. Replaces the second edition, of which it constitutes a technical revision.</p>"

28797,IS,Cor,ISO 1559:1995/Cor 1:1997,Dental materials — Alloys for dental amalgam — Technical Corrigendum 1,Produits dentaires — Alliages pour amalgame dentaire — Rectificatif technique 1,1997-05-22,3,['11.060.10'],ISO/TC 106/SC 1,9599,,[37112],"['en','fr']",1,

28308,IS,,ISO 15590-1:2001,"Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends","Industries du pétrole et du gaz naturel — Coudes d'induction, raccords et brides pour systèmes de transport par conduites — Partie 1: Coudes d'induction",2001-05-24,1,['75.200'],ISO/TC 67/SC 2,9599,,[45121],['en'],24,

45121,IS,,ISO 15590-1:2009,"Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends","Industries du pétrole et du gaz naturel — Coudes d'induction, raccords et brides pour systèmes de transport par conduites — Partie 1: Coudes d'induction",2009-11-09,2,['75.200'],ISO/TC 67/SC 2,9599,[28308],[71208],['en'],32,"<p>ISO 15590-1:2009 specifies the technical delivery conditions for bends made by the induction bending process for use in pipeline transportation systems for the petroleum and natural gas industries as defined in ISO 13623.</p><p>ISO 15590-1:2009 is applicable to induction bends made from seamless and we

71208,IS,,ISO 15590-1:2018,"Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends","Industries du pétrole et du gaz naturel — Coudes d'induction, raccords et brides pour systèmes de transport par conduites — Partie 1: Coudes d'induction",2018-10-03,3,['75.200'],ISO/TC 67/SC 2,9599,[45121],[85757],['en'],32,"<p>This document specifies the technical delivery conditions for bends made by the induction bending process for use in pipeline transportation systems for the petroleum and natural gas industries as defined in ISO 13623.</p><p>This document is applicable to induction bends made from seamless and welded p

33104,IS,,ISO 15590-2:2003,"Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 2: Fittings","Industries du pétrole et du gaz naturel — Coudes d'induction, raccords et brides pour systèmes de transport par conduites — Partie 2: Raccords",2003-12-11,1,['75.200'],ISO/TC 67/SC 2,9599,,[78072],['en'],26,"<p>ISO 15590-2:2003 specifies the technical delivery conditions for unalloyed or low-alloy steel seamless and welded pipeline fittings for use in pipeline transportation systems for the petroleum and natural gas industries as defined in ISO 13623.</p><p>ISO 15590-2:2003 is applicable to welding end-fittings such as elbows, caps,

33105,IS,,ISO 15590-3:2004,"Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 3: Flanges","Industries du pétrole et du gaz naturel — Coudes d'induction, raccords et brides pour systèmes de transport par conduites — Partie 3: Brides",2004-11-03,1,['75.200'],ISO/TC 67/SC 2,9599,,[78073],['en'],17,"<p>ISO 15590-3:2004 applies to weldneck and blind flanges (full face, raised face, and RTJ groove) as well as anchor, swivel-ring flanges and orifice flanges.</p><p>ISO 15590-3:2004 specifies the technical requirements for carbon steel and low-alloy steel forged flanges for use in pipeline transportation systems for the petroleum a

28318,IS,,ISO 15592-2:2001,"Fine-cut tobacco and smoking articles made from it — Methods of sampling, conditioning and analysis — Part 2: Atmosphere for conditioning and testing","Tabac à rouler et objets confectionnés à partir de ce type de tabac — Méthodes d'échantillonnage, de conditionnement et d'analyse — Partie 2: Atmosphère de conditionnement et d'essai",2001-03-08,1,['65.160'],ISO/TC 126,9599,,[89328],"['en','fr']",5,

28319,IS,,ISO 15592-3:2003,"Fine-cut tobacco and smoking articles made from it — Methods of sampling, conditioning and analysis — Part 3: Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and nicotine, and calculation of nicotine-free dry particulate matter","Tabac à rouler et objets confectionnés à partir de ce type de tabac — Méthodes d'échantillonnage, de conditionnement et d'analyse — Partie 3: Dosage de la matière particulaire totale des objets à fumer au moyen d'une machine à fumer analytique de routine, préparation pour le dosage de l'eau et de la nicotine, et calcul de la matière partic

44876,IS,,ISO 15592-3:2008,"Fine-cut tobacco and smoking articles made from it — Methods of sampling, conditioning and analysis — Part 3: Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and nicotine, and calculation of nicotine-free dry particulate matter","Tabac à rouler et objets confectionnés à partir de ce type de tabac — Méthodes d'échantillonnage, de conditionnement et d'analyse — Partie 3: Dosage de la matière particulaire totale des objets à fumer au moyen d'une machine à fumer analytique de routine, préparation pour le dosage de l'eau et de la nicotine, et calcul de la matière partic

76381,IS,,ISO 15592-3:2022,"Fine-cut tobacco and smoking articles made from it — Methods of sampling, conditioning and analysis — Part 3: Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and nicotine, and calculation of nicotine-free dry particulate matter","Tabac à rouler et objets confectionnés à partir de ce type de tabac — Méthodes d'échantillonnage, de conditionnement et d'analyse — Partie 3: Dosage de la matière particulaire totale des objets à fumer au moyen d'une machine à fumer analytique de routine, préparation pour le dosage de l'eau et de la nicotine, et calcul de la matière partic

27764,IS,,ISO 15597:2001,Petroleum and related products — Determination of chlorine and bromine content — Wavelength-dispersive X-ray fluorescence spectrometry,Produits pétroliers et produits connexes — Dosage du chlore et du brome — Spectrométrie par fluorescence X dispersive en longueur d'onde,2001-02-08,1,['75.080'],ISO/TC 28,9599,,[89559],"['en','fr']",7,"<p>This International Standard specifies a method for the determination of the chlorine and bromine content of liquid</p><p>petroleum products, synthetic oils and fluids, and additives for petroleum products (including used oils) that are</p><p>soluble in organic solvents of negligible or accurately known chlorine/bromine content. The m

3986,IS,,ISO 156:1982,Metallic materials — Hardness test — Verification of Brinell hardness testing machines,Matériaux métalliques — Essai de dureté — Contrôle des machines d'essai de dureté Brinell,1982-09-01,1,['77.040.10'],ISO/TC 164/SC 3,9599,,[27573],"['en','fr']",3,

6150,IS,,ISO 1560:1975,Dental mercury,Mercure à usage dentaire,1975-03-01,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[6151],"['en','fr']",1,

6151,IS,,ISO 1560:1985,Dental mercury,Mercure à usage dentaire,1985-04-18,2,['11.060.10'],ISO/TC 106/SC 1,9599,[6150],[37112],"['en','fr']",2,"<p>Specification of requirements and test methods for mercury suitable for the preparation of dental amalgam, together with requirements for packaging and marketing. This standard does not specify neither the requirements for sampling and the method of procurement nor the amount of mercury needed for testing.</p>"

28387,IS,,ISO 15606:1999,Dental handpieces — Air-powered scalers and scaler tips,"Pièces à main dentaires — Instruments dentaires pour détartrage, actionnés par air comprimé, et parties actives de l'instrument pour détartrage",1999-12-16,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[62362],"['en','fr']",9,