Withdrawn and superseded ISO standards — page 52 of 246

28388,IS,,ISO 15607:2003,Specification and qualification of welding procedures for metallic materials — General rules,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Règles générales,2003-12-09,1,['25.160.10'],ISO/TC 44/SC 10,9599,"[27387,17854]",[71495],"['en','fr']",14,"<p>ISO 15607:2003 defines general rules for the specification and qualification of welding procedures for metallic materials.</p><p>It also refers to several other standards as regards detailed rules for specific applications. ISO 15607:2003 is applicable to manual, mechanized and automatic welding.</p>"

42908,IS,Cor,ISO 15607:2003/Cor 1:2005,Specification and qualification of welding procedures for metallic materials — General rules — Technical Corrigendum 1,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Règles générales — Rectificatif technique 1,2005-09-16,1,['25.160.10'],ISO/TC 44/SC 10,9599,,[71495],"['en','fr']",1,

28390,IS,,ISO 15609-1:2004,Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 1: Arc welding,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Descriptif d'un mode opératoire de soudage — Partie 1: Soudage à l'arc,2004-10-04,1,['25.160.10'],ISO/TC 44/SC 10,9599,"[17855,27388]","[75556,66055]","['en','fr']",7,<p>ISO 15609-1:2004 specifies requirements for the content of welding procedure specifications for arc welding processes.</p><p>The variables listed in this International Standard are those influencing the quality of the welded joint.</p>

42907,IS,Cor,ISO 15609-1:2004/Cor 1:2005,Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 1: Arc welding — Technical Corrigendum 1,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Descriptif d'un mode opératoire de soudage — Partie 1: Soudage à l'arc — Rectificatif technique 1,2005-09-16,1,['25.160.10'],ISO/TC 44/SC 10,9599,,"[75556,66055]","['en','fr']",1,

28404,IS,,ISO 15609-2:2001,Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 2: Gas welding,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Descriptif d'un mode opératoire de soudage — Partie 2: Soudage aux gaz,2001-09-13,1,['25.160.10'],ISO/TC 44/SC 10,9599,,[75750],"['en','fr']",4,

28406,IS,,ISO 15609-4:2004,Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 4: Laser beam welding,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Descriptif d'un mode opératoire de soudage — Partie 4: Soudage par faisceau laser,2004-07-27,1,['25.160.10'],ISO/TC 44/SC 10,9599,[24758],[43487],"['en','fr']",9,<p>ISO 15609-4:2004 specifies requirements for the content of welding procedure specifications for laser beam welding processes.</p><p>Variables listed in this International Standard are those influencing the quality and properties of the welded joint.</p>

28407,IS,,ISO 15609-5:2004,Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 5: Resistance welding,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Descriptif d'un mode opératoire de soudage — Partie 5: Soudage par résistance,2004-08-09,1,['25.160.10'],ISO/TC 44/SC 6,9599,,[53804],"['en','fr']",11,"<p>ISO 15609-5:2004 specifies requirements for the content of welding procedure specifications for resistance spot, seam, butt and projection welding processes. The acceptability of applying the principles of this International Standard to other resistance and related welding processes s

6152,IS,,ISO 1561:1975,Dental inlay casting wax,Cires à inlays dentaires,1975-05-01,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[20265],"['en','fr']",5,

20265,IS,,ISO 1561:1995,Dental casting wax,Cires dentaires,1995-10-19,2,['11.060.10'],ISO/TC 106/SC 2,9599,[6152],"[34948,37635]","['en','fr']",7,"<p>Specifies the classification of and requirements for dental casting wax and describes test methods for the determination of compliance with these requirements. Replaces the first edition, which has been technically revised.</p>"

28391,IS,,ISO 15610:2003,Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Qualification basée sur des produits consommables soumis à essais,2003-10-09,1,['25.160.10'],ISO/TC 44/SC 10,9599,[21087],[80626],['en'],5,"<p>ISO 15610:2003 gives the necessary information to explain the requirements referenced in ISO 15607 concerning the qualification of welding procedures based on tested consumables. In addition, it gives the range of qualification.</p><p>ISO 15610:2003 applies to arc and gas welding but other fusion welding proc

80626,IS,,ISO 15610:2023,Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Qualification basée sur des produits consommables soumis à essais,2023-02-10,2,['25.160.10'],ISO/TC 44/SC 10,9599,[28391],[86905],"['en','fr']",6,"<p class='MsoBodyText'><span lang='EN-GB'>This document specifies how a welding procedure can be qualified by using tested welding consumable data. It expands on the requirements given in ISO 15607.</span></p><p class='MsoBodyText'><span lang='EN-GB'>In addition, it gives the range of qualification.</span

28392,IS,,ISO 15611:2003,Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Qualification sur la base de l'expérience en soudage,2003-12-09,1,['25.160.01'],ISO/TC 44/SC 10,9599,[21628],[81783],"['en','fr']",4,<p>ISO 15611:2003 gives the necessary information to explain the requirements referenced in ISO 15607 concerning the qualification of welding procedures based on previous welding experience.</p><p>In addition it gives the range of qualification and the validity.</p><p>The use of ISO 15611:2003 may be restricted by an

28393,IS,,ISO 15612:2004,Specification and qualification of welding procedures for metallic materials — Qualification by adoption of a standard welding procedure,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Qualification par référence à un mode opératoire de soudage standard,2004-07-30,1,['25.160.10'],ISO/TC 44/SC 10,9599,[21629],[65971],"['en','fr']",6,"<p>ISO 15612:2004 gives the information necessary to explain the requirements referenced in ISO 15607 about qualification by adoption of a standard welding procedure, and establishes the conditions, limits and ranges of qualification necessary for the use of a standard welding procedure.</p><p>

28394,IS,,ISO 15613:2004,Specification and qualification of welding procedures for metallic materials — Qualification based on pre-production welding test,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Qualification sur la base d'un assemblage soudé de préproduction,2004-06-16,1,['25.160.10'],ISO/TC 44/SC 10,9599,[21630],[81784],"['en','fr']",4,"<p>ISO 15613:2004 specifies how a preliminary welding procedure specification is qualified based on pre-production welding tests.</p><p>It is applicable to arc welding, gas welding, beam welding, resistance welding, stud welding and friction welding of metallic materials.</p><p>The use of ISO 15613:2004 c

28395,IS,,ISO 15614-1:2004,Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de qualification d'un mode opératoire de soudage — Partie 1: Soudage à l'arc et aux gaz des aciers et soudage à l'arc des nickels et alliages de nickel,2004-06-18,1,['25.160.10'],ISO/TC 44/SC 10,9599,"[17856,27389]",[51792],"['en','fr']",28,"<p>ISO 15614-1:2004 specifies how a preliminary welding procedure specification is qualified by welding procedure tests.</p><p>It defines the co

43236,IS,Amd,ISO 15614-1:2004/Amd 1:2008,Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys — Amendment 1,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de qualification d'un mode opératoire de soudage — Partie 1: Soudage à l'arc et aux gaz des aciers et soudage à l'arc des nickels et alliages de nickel — Amendement 1,2008-02-14,1,['25.160.10'],ISO/TC 44/SC 10,9599,,[51792],"['en','fr']",2,

59597,IS,Amd,ISO 15614-1:2004/Amd 2:2012,Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys — Amendment 2,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de qualification d'un mode opératoire de soudage — Partie 1: Soudage à l'arc et aux gaz des aciers et soudage à l'arc des nickels et alliages de nickel — Amendement 2,2012-02-08,1,['25.160.10'],ISO/TC 44/SC 10,9599,,[51792],"['en','fr']",1,

42911,IS,Cor,ISO 15614-1:2004/Cor 1:2005,Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys — Technical Corrigendum 1,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de qualification d'un mode opératoire de soudage — Partie 1: Soudage à l'arc et aux gaz des aciers et soudage à l'arc des nickels et alliages de nickel — Rectificatif technique 1,2005-09-15,1,['25.160.10'],ISO/TC 44/SC 10,9599,,[51792],['en'],1,

28417,IS,,ISO 15614-11:2002,Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 11: Electron and laser beam welding,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de qualification d'un mode opératoire — Partie 11: Soudage par faisceau d'électrons et par faisceau laser,2002-03-14,1,['25.160.10'],ISO/TC 44/SC 10,9599,,[81785],"['en','fr']",23,

28418,IS,,ISO 15614-12:2004,"Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 12: Spot, seam and projection welding","Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de qualification d'un mode opératoire de soudage — Partie 12: Soudage par points, à la molette et par bossages",2004-08-05,1,['25.160.10'],ISO/TC 44/SC 6,9599,,[64830],"['en','fr']",9,"<p>ISO 15614-12:2004 specifies the tests which may be used for qualification of welding procedure specifications for spot, seam and projection welding processes.</p><p>ISO 15614-12:2004 defines the conditions for carrying out tests and

64830,IS,,ISO 15614-12:2014,"Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 12: Spot, seam and projection welding","Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de qualification d'un mode opératoire de soudage — Partie 12: Soudage par points, à la molette et par bossages",2014-06-26,2,['25.160.10'],ISO/TC 44/SC 6,9599,[28418],[79821],"['en','fr']",8,"<p>ISO 15614-12:2014 specifies the tests which can be used for qualification of welding procedure specifications for spot, seam, and projection welding processes. It is part of the ISO 15614 series, details of which are given in

40635,IS,,ISO 15614-13:2005,Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 13: Resistance butt and flash welding,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Epreuve de qualification d'un mode opératoire de soudage — Partie 13: Soudage en bout par résistance pure et soudage par étincelage,2005-02-28,1,['25.160.10'],ISO/TC 44/SC 6,9599,,[53805],"['en','fr']",15,"<p>ISO 15614-13:2005 specifies the tests which should be used for qualification of welding procedure specifications.</p><p>It applies to resistance butt welding and flash welding of metallic materials, e.g. with solid, tubular

53805,IS,,ISO 15614-13:2012,Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 13: Upset (resistance butt) and flash welding,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de qualification d'un mode opératoire de soudage — Partie 13: Soudage en bout par résistance pure et soudage par étincelage,2012-06-26,2,['25.160.10'],ISO/TC 44/SC 6,9599,[40635],[79822],"['en','fr']",13,"<p>ISO 15614-13:2012 specifies tests for the qualification of welding procedure specifications applicable to upset (resistance butt) welding and flash welding of metallic materials, e.g. with solid, tubular, fla

79822,IS,,ISO 15614-13:2021,Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 13: Upset (resistance butt) and flash welding,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de qualification d'un mode opératoire de soudage — Partie 13: Soudage en bout par résistance pure et soudage par étincelage,2021-11-18,3,['25.160.10'],ISO/TC 44/SC 6,9599,[53805],[85314],"['en','fr']",15,"<p>This document specifies tests for the qualification of welding procedure specifications applicable to upset (resistance butt) welding and flash welding of metallic materials, e.g. with solid, tubular, flat or

28408,IS,,ISO 15614-2:2005,Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 2: Arc welding of aluminium and its alloys,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de qualification d'un mode opératoire de soudage — Partie 2: Soudage à l'arc de l'aluminium et de ses alliages,2005-05-26,1,['25.160.10'],ISO/TC 44/SC 10,9599,"[17857,27390]",[82483],"['en','fr']",29,"<p>ISO 15614-2:2005 specifies how a preliminary welding procedure specification is qualified by welding procedure tests.</p><p>It applies to the arc welding of wrought and cast aluminium and its alloys.</p><p>It does no

42912,IS,Cor,ISO 15614-2:2005/Cor 1:2005,Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 2: Arc welding of aluminium and its alloys — Technical Corrigendum 1,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de qualification d'un mode opératoire de soudage — Partie 2: Soudage à l'arc de l'aluminium et de ses alliages — Rectificatif technique 1,2005-09-16,1,['25.160.10'],ISO/TC 44/SC 10,9599,,[82483],['en'],1,

54129,IS,Cor,ISO 15614-2:2005/Cor 2:2009,Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 2: Arc welding of aluminium and its alloys — Technical Corrigendum 2,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de qualification d'un mode opératoire de soudage — Partie 2: Soudage à l'arc de l'aluminium et de ses alliages — Rectificatif technique 2,2009-04-16,1,['25.160.10'],ISO/TC 44/SC 10,9599,,[82483],['fr'],,

28411,IS,,ISO 15614-5:2004,"Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 5: Arc welding of titanium, zirconium and their alloys","Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de qualification d'un mode opératoire de soudage — Partie 5: Soudage à l'arc sur titane, zirconium et leurs alliages",2004-03-17,1,['25.160.10'],ISO/TC 44/SC 10,9599,,[81787],"['en','fr']",21,"<p>ISO 15614-5:2004 specifies how a welding procedure specification is qualified by welding procedure tests.</p><p>It defines the conditions for the execution of welding procedure tests and the range of qualifica

40882,IS,,ISO 15614-7:2007,Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 7: Overlay welding,Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de qualification d'un mode opératoire de soudage — Partie 7: Rechargement par soudage,2007-06-14,1,['25.160.10'],ISO/TC 44/SC 10,9599,,[57926],"['en','fr']",21,"<p>ISO 15614-7:2007 specifies how a preliminary welding procedure specification for overlay welding is qualified by welding procedure tests. </p><p>ISO 15614-7:2007 defines the conditions for carrying out welding procedure tests and the range of qualification for welding procedures

28414,IS,,ISO 15614-8:2002,Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 8: Welding of tubes to tube-plate joints,Descriptif et qualification d'un mode opératoire de soudage sur les matériaux métalliques — Épreuve de qualification d'un mode opératoire — Partie 8: Soudage de tubes sur plaques tubulaires,2002-03-28,1,['25.160.10'],ISO/TC 44/SC 10,9599,,[57927],"['en','fr']",19,"<p>This European Standard specifies requirements for the qualification testing of welding procedures for the arc welding of tube to tube-plate joints in metallic materials by manual, partly mechanized, mechanized or automatic processes.</p><p>This standard i

28396,IS,,ISO 15615:2002,"Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — Safety requirements in high-pressure devices","Matériel de soudage aux gaz — Centrales de détente pour la distribution d'acétylène pour le soudage, le coupage et les techniques connexes — Exigences de sécurité pour les dispositifs haute pression",2002-05-30,1,['25.160.30'],ISO/TC 44/SC 8,9599,,[54384],"['en','fr']",17,"<p>This standard lays down the general specifications, requirements and tests of devices located on the high-pressure side of acetylene manifold systems as defined in EN ISO 14114. The standard does not cover the high-pressure piping, flexible hoses and the

54384,IS,,ISO 15615:2013,"Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — Safety requirements in high-pressure devices","Matériel de soudage aux gaz — Centrales de détente pour la distribution d'acétylène pour le soudage, le coupage et les techniques connexes — Exigences de sécurité pour les dispositifs haute pression",2013-04-10,2,['25.160.30'],ISO/TC 44/SC 8,9599,[28396],[77247],"['en','fr']",16,"<p>ISO 15615:2013 establishes the general specifications, requirements and tests for devices located on the high-pressure side of acetylene manifold systems as defined in ISO 14114. It does not cover the high-pressure piping, flexible hoses and the re

28399,IS,,ISO 15618-1:2001,Qualification testing of welders for underwater welding — Part 1: Diver-welders for hyperbaric wet welding,Épreuve de qualification des soudeurs pour le soudage sous l'eau — Partie 1: Scaphandriers soudeurs pour le soudage hyperbare en pleine eau,2001-12-20,1,['25.160.01'],ISO/TC 44/SC 11,9599,,"[62656,68892]","['en','fr']",28,

55443,IS,,ISO 15619:2013,Reciprocating internal combustion engines — Measurement method for exhaust silencers — Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio,Moteurs alternatifs à combustion interne — Méthode de mesure pour silencieux d'échappement — Niveau de puissance acoustique du bruit à l'échappement et perte par insertion à partir de la pression acoustique et du rapport de perte de puissance,2013-09-13,1,['27.020'],ISO/TC 70,9599,,[89179],['en'],35,"<p>ISO 15619:2013 specifies the measurement method and requirements for exhaust silencers which is installed on reciprocating internal combustion engines, including laboratory measurement an

6153,IS,,ISO 1562:1976,Dental casting gold alloys,Alliages d'or dentaires à couler,1976-12-01,1,['11.060.10'],ISO/TC 106/SC 2,9599,,"[6154,6155]",['en'],3,

6154,IS,,ISO 1562:1984,Dental casting gold alloys,Alliages d'or dentaires à couler,1984-08-01,2,['11.060.10'],ISO/TC 106/SC 2,9599,[6153],[6155],"['en','fr']",4,

6155,IS,,ISO 1562:1993,Dental casting gold alloys,Alliages d'or dentaires à couler,1993-11-18,3,['11.060.10'],ISO/TC 106/SC 2,9599,"[6154,6153]",[33951],"['en','fr']",5,"<p>Gives the classification of, and specifies requirements and test methods for gold-based dental casting alloys with a content of at least 75 % (m/m) of gold and platinum group metals. Applies to casting alloys suitable for the fabrication of dental restorations and appliances. Does not apply to alloys intended for use as the substructure of a metallo-ceramic restoration (ISO 9693) nor to dental casting alloys with noble metal content of 25 % up to but not including 75 % (ISO 8891).</p>"

33951,IS,,ISO 1562:2004,Dentistry — Casting gold alloys,Art dentaire — Alliages d'or à couler,2004-04-26,4,['11.060.10'],ISO/TC 106/SC 2,9599,[6155],[36412],"['en','fr']",16,"<p>ISO 1562:2004 gives the classification of, and specifies requirements for dental casting gold alloys with at least 60 % mass fraction of gold and at least 75 % mass fraction of gold plus specified platinum group metals (platinum, palladium, iridium, ruthenium and rhodium). Test methods are given for providing information on corrosion resistance, tarnishing resistance and electrochemical behaviour.</p><p>ISO 1562:2004 is applicable to casting alloys suitable for the fabrication of dental restorations and appliances wi

28403,IS,,ISO 15620:2000,Welding — Friction welding of metallic materials,Soudage — Soudage par friction des matériaux métalliques,2000-07-20,1,['25.160.10'],ISO/TC 44/SC 10,9599,,[72734],"['en','fr']",33,

28427,IS,,ISO 15621:1999,Urine-absorbing aids — General guidance on evaluation,Aides pour absorption d'urine — Lignes directrices générales d'évaluation,1999-03-25,1,['11.180.20'],ISO/TC 173/SC 3,9599,,[50762],"['en','fr']",5,

50762,IS,,ISO 15621:2011,Urine-absorbing aids — General guidelines on evaluation,Aides pour l'absorption d'urine — Directives générales d'évaluation,2011-01-27,2,['11.180.20'],ISO/TC 173/SC 3,9599,[28427],[65740],['en'],11,"<p>ISO 15621:2011 gives general guidelines on the methodology of evaluating disposable urine-absorbing aids, and provides a context for the procedures described in other International Standards or published testing procedures. These products are also used for faecal incontinence, which is occasionally mentioned.</p>"

65740,IS,,ISO 15621:2017,Absorbent incontinence aids for urine and/or faeces — General guidelines on evaluation,Aides à l'incontinence pour l'absorption d'urine et/ou de matières fécales— Directives générales d'évaluation,2017-06-16,3,['11.180.20'],ISO/TC 173/SC 3,9599,[50762],[86534],"['en','fr']",12,<p>ISO 15621:2017 gives guidelines for evaluating absorbent incontinence aids for urine and/or faeces. It provides a context for the procedures described in other International Standards and published testing procedures. General factors relating to incontinence products and their usage are also addressed.</p>

27834,IS,,ISO 15622:2002,Transport information and control systems — Adaptive Cruise Control Systems — Performance requirements and test procedures,Systèmes de commande et d'informations des transports — Systèmes stabilisateurs de vitesse adaptés — Exigences de performance et modes opératoires,2002-10-10,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[50024],['en'],25,"<p>ISO 15622:2002 specifies the basic control strategy, minimum functionality requirements, basic driver interface elements, minimum requirements for diagnostics and reaction to failure, and performance test procedures for Adaptive Cruise Control (ACC) systems. ACC is fundamentally intended to provide longitudinal control of e

50024,IS,,ISO 15622:2010,Intelligent transport systems — Adaptive Cruise Control systems — Performance requirements and test procedures,Systèmes intelligents de transports — Systèmes stabilisateurs de vitesse adaptés — Exigences de performance et modes opératoires,2010-04-08,2,"['35.240.60','03.220.20']",ISO/TC 204,9599,[27834],[71515],['en'],25,"<p>ISO 15622:2010 contains the basic control strategy, minimum functionality requirements, basic driver interface elements, minimum requirements for diagnostics and reaction to failure, and performance test procedures for Adaptive Cruise Control (ACC) systems. Adaptive Cruise Control is fundamentally intended to provide longitudinal control of equip

27835,IS,,ISO 15623:2002,Transport information and control systems — Forward vehicle collision warning systems — Performance requirements and test procedures,Systèmes de commande et d'information des transports — Systèmes d'avertissement de collision de véhicule frontale — Exigences de performance et modes opératoires,2002-10-10,1,"['43.040.99','35.240.60','03.220.01']",ISO/TC 204,9599,,[56655],['en'],25,"<p>ISO 15623:2002 specifies performance requirements and test procedures for systems capable of warning the driver of short inter-vehicle distance and closing speed which may cause a rear-end collision with other vehicles, including motor cycles, ahead of the subject vehicle while it is ope

55468,IS,,ISO 15626:2011,Non-destructive testing of welds — Time-of-flight diffraction technique (TOFD) — Acceptance levels,Contrôle non destructif des assemblages soudés — Technique de diffraction des temps de vol (TOFD) — Niveaux d'acceptation,2011-01-20,1,['25.160.40'],ISO/TC 44/SC 5,9599,,[72746],"['en','fr','ru']",11,<p>ISO 15626:2011 specifies acceptance levels for the time-of-flight diffraction technique (TOFD) of full penetration welds in ferritic steels from 6 mm up to 300 mm thickness which correspond to the quality levels of ISO 5817.</p><p>These acceptance levels are applicable to indications classified in accordance with ISO 10863.</p>

44432,IS,,ISO 15628:2007,Road transport and traffic telematics — Dedicated short range communication (DSRC) — DSRC application layer,Télématique du transport routier et de la circulation routière — Communications dédiées à courte portée (DSRC) — Couche d'application DSRC,2007-01-12,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[59288],['en'],49,"<p>ISO 15628:2007 specifies the application layer core which provides communication tools for applications based on DSRC. These tools consist of kernels that can be used by application processes via service primitives. The application processes, including application data and application-specific functions, are outside the scope of ISO 15628:2007.</

6156,IS,,ISO 1563:1978,Alginate dental impression material,Produits pour empreintes dentaires à base d'alginate,1978-06-01,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[6157],"['en','fr']",14,

6158,IS,Amd,ISO 1563:1978/Amd 1:1981,Alginate dental impression material — Amendment 1,Produits pour empreintes dentaires à base d'alginate — Amendement 1,1981-10-01,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[6157],['en'],1,

6157,IS,,ISO 1563:1990,Dental alginate impression material,Produits pour empreintes dentaires à base d'alginate,1990-08-30,2,['11.060.10'],ISO/TC 106/SC 2,9599,"[6158,6156]","[55314,41384]","['en','fr']",10,"<p>Establishment of the classification of and specification of the requirements for impression materials in powder form containing an alginate as the gel-forming ingredient. This standard replaces ISO/R 1563/1970 of which it constitutes a technical revision. The figures show the different test apparatus, instruments and components.</p>"

28434,IS,,ISO 15630-1:2002,"Steel for the reinforcement and prestressing of concrete — Test methods — Part 1: Reinforcing bars, wire rod and wire","Aciers pour l'armature et la précontrainte du béton — Méthodes d'essai — Partie 1: Barres, fils machine et fils pour béton armé",2002-05-09,1,['77.140.15'],ISO/TC 17/SC 16,9599,"[18034,18329,18689]",[45325],"['en','fr']",15,"<div id='MathJax_Message' style='display: none;'></div><p>ISO 15630-1 specifies test methods applicable to steel reinforcing bars, wire rod and wire used for reinforcing and prestressing of concrete.</p>"

45325,IS,,ISO 15630-1:2010,"Steel for the reinforcement and prestressing of concrete — Test methods — Part 1: Reinforcing bars, wire rod and wire","Aciers pour l'armature et la précontrainte du béton — Méthodes d'essai — Partie 1: Barres, fils machine et fils pour béton armé",2010-10-06,2,['77.140.15'],ISO/TC 17/SC 16,9599,[28434],[66130],"['en','fr']",20,"<p>ISO 15630-1:2010 specifies test methods applicable to reinforcing bars, wire rod and wire for concrete.</p>"

28435,IS,,ISO 15630-2:2002,Steel for the reinforcement and prestressing of concrete — Test methods — Part 2: Welded fabric,Aciers pour l'armature et la précontrainte du béton — Méthodes d'essai — Partie 2: Treillis soudés,2002-05-02,1,['77.140.15'],ISO/TC 17/SC 16,9599,"[18034,18329,18689]",[45326],"['en','fr']",11,<p>ISO 15630-2 specifies test methods applicable to welded steel fabric used for the reinforcement and prestressing of concrete.</p>

45326,IS,,ISO 15630-2:2010,Steel for the reinforcement and prestressing of concrete — Test methods — Part 2: Welded fabric,Aciers pour l'armature et la précontrainte du béton — Méthodes d'essai — Partie 2: Treillis soudés,2010-10-07,2,['77.140.15'],ISO/TC 17/SC 16,9599,[28435],[66443],"['en','fr']",16,<p>ISO 15630-2:2010 specifies test methods applicable to welded fabric for the reinforcement of concrete.</p>

28436,IS,,ISO 15630-3:2002,Steel for the reinforcement and prestressing of concrete — Test methods — Part 3: Prestressing steel,Aciers pour l'armature et la précontrainte du béton — Méthodes d'essai — Partie 3: Armatures de précontrainte,2002-05-09,1,['77.140.15'],ISO/TC 17/SC 16,9599,"[18034,18329,18689]",[45327],"['en','fr']",22,"<p>ISO 15630-3 specifies test methods applicable to prestressing steels (bar, wire or strand) used in the reinforcement and prestressing of concrete.</p>"

45327,IS,,ISO 15630-3:2010,Steel for the reinforcement and prestressing of concrete — Test methods — Part 3: Prestressing steel,Aciers pour l'armature et la précontrainte du béton — Méthodes d'essai — Partie 3: Aciers de précontrainte,2010-10-07,2,['77.140.15'],ISO/TC 17/SC 16,9599,[28436],[66444],"['en','fr']",27,"<p>ISO 15630-3:2010 specifies test methods applicable to prestressing steels (bar, wire or strand) for concrete.</p>"

66444,IS,,ISO 15630-3:2019,Steel for the reinforcement and prestressing of concrete — Test methods — Part 3: Prestressing steel,Aciers pour l'armature et la précontrainte du béton — Méthodes d'essai — Partie 3: Aciers de précontrainte,2019-02-07,3,['77.140.15'],ISO/TC 17/SC 16,9599,[45327],[84362],"['en','fr']",30,"<p>This document specifies test methods applicable to prestressing steel (bar, wire or strand) for concrete.</p><p>This document does not cover the sampling conditions that are dealt with in the product standards.</p><p>A list of options for agreement between the parties involved is provided in Annex A.</p>"

27968,IS,,ISO 15632:2002,Microbeam analysis — Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors,Analyse par microfaisceaux — Spécifications instrumentales pour spectromètres de rayons X à sélection d'énergie avec détecteurs à semi-conducteurs,2002-11-25,1,"['37.020','71.040.99']",ISO/TC 202,9599,,[52661],"['en','fr']",8,"<p>ISO 15632 defines the most important quantities that characterize an energy dispersive X-ray spectrometer (EDS) consisting of a semiconductor detector, a pre-amplifier and a signal processing unit as the essential parts. This International Standard is only applicable to spectrometers with semiconductor detectors operating on

52661,IS,,ISO 15632:2012,Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis,Analyse par microfaisceaux — Paramètres de performance instrumentale sélectionnés pour la spécification et le contrôle des spectromètres X à sélection d'énergie utilisés en microanalyse par sonde à électrons,2012-07-31,2,['71.040.99'],ISO/TC 202,9599,[27968],[78269],"['en','fr']",11,"<p>This International Standard defines the most important quantities that characterize an energy-dispersive X-ray spectrometer consisting of a semiconductor detector, a pre-amplifier and a signal-processing u

43729,IS,,ISO 15633:2009,Iron ores — Determination of nickel — Flame atomic absorption spectrometric method,Minerais de fer — Dosage du nickel — Méthode par spectrométrie d'absorption atomique dans la flamme,2009-01-07,1,['73.060.10'],ISO/TC 102/SC 2,9599,,[67675],['en'],13,"<p>ISO 15633:2009 specifies a flame atomic absorption spectrometric method for the determination of the nickel mass fraction of iron ores.</p><p>This method is applicable to mass fractions of nickel between 0,001 % and 0,1 % in natural iron ores, iron ore concentrates and agglomerates, including sinter products.</p><p>This method is not appropriate for referee purposes.</p>"

67675,IS,,ISO 15633:2015,Iron ores — Determination of nickel — Flame atomic absorption spectrometric method,Minerais de fer — Dosage du nickel — Méthode par spectrométrie d'absorption atomique dans la flamme,2015-06-19,2,['73.060.10'],ISO/TC 102/SC 2,9599,[43729],[73611],['en'],13,"<p>ISO 15633:2015 specifies a flame atomic absorption spectrometric method for the determination of the nickel mass fraction of iron ores.</p><p>This method is applicable to mass fractions of nickel between 0,001 % and 0,1 % in natural iron ores, iron ore concentrates, and agglomerates including sinter products.</p><p>This method is not appropriate for referee purposes.</p>"

39812,IS,,ISO 15634:2005,Iron ores — Determination of chromium content — Flame atomic absorption spectrometric method,Minerais de fer — Dosage du chrome — Méthode par spectrométrie d'absorption atomique dans la flamme,2005-05-23,1,['73.060.10'],ISO/TC 102/SC 2,9599,,[67674],['en'],13,"<p>ISO 15634:2005 specifies a flame atomic absorption spectrometric method for the determination of the chromium content of iron ores.</p><p>ISO 15634:2005 is applicable to chromium contents between 0,001 6 % and 0,1 % (mass fractions) in natural iron ores, iron ore concentrates and agglomerates, including sinter products.</p>"

6159,IS,,ISO 1564:1976,Agar impression material,Produits pour empreintes à base d'agar-agar,1976-12-01,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[22897],"['en','fr']",6,

22897,IS,,ISO 1564:1995,Dental aqueous impression materials based on agar,Produits dentaires hydrauliques pour empreintes à base d'agar-agar,1995-10-26,2,['11.060.10'],ISO/TC 106/SC 2,9599,[6159],[55314],"['en','fr']",14,"<p>Specifies requirements for physical properties and other characteristics of impression materials and tests for determining compliance with those requirements. It also specifies requirements with respect to the manufacturer's instructions, and the essentials for packaging, labelling and marking. Replaces the first edition to which a great number of amendments were made.</p>"

28516,IS,,ISO 15643:2002,Road construction and maintenance equipment — Bituminous binder spreaders/sprayers — Terminology and commercial specifications,Équipement pour la construction et l'entretien des routes — Épandeuses/pulvérisatrices de liants bitumineux — Terminologie et spécifications commerciales,2002-03-07,1,['93.080.10'],ISO/TC 195,9599,,[75456],['en'],14,"<p>This International Standard establishes the terminology for soil stabilizers used in road construction and pavement works. It provides the terminology for the machine and its components, also the definitions of operation principles and parameters.</p><p>This International Standard also establishes the parameters required for t

57503,IS,Amd,ISO 15643:2002/Amd 1:2012,Road construction and maintenance equipment — Bituminous binder spreaders/sprayers — Terminology and commercial specifications — Amendment 1,Équipement pour la construction et l'entretien des routes — Épandeuses/pulvérisatrices de liants bitumineux — Terminologie et spécifications commerciales — Amendement 1,2012-06-04,1,['93.080.10'],ISO/TC 195,9599,,[75456],['en'],1,

28518,IS,,ISO 15645:2002,Road construction and maintenance equipment — Road milling machinery — Terminology and commercial specifications,Équipement pour la construction et l'entretien des routes — Fraiseuses — Terminologie et spécifications commerciales,2002-05-16,1,['93.080.10'],ISO/TC 195,9599,,[72522],['en'],9,

57502,IS,Amd,ISO 15645:2002/Amd 1:2013,Road construction and maintenance equipment — Road milling machinery — Terminology and commercial specifications — Amendment 1,Équipement pour la construction et l'entretien des routes — Fraiseuses — Terminologie et spécifications commerciales — Amendement 1,2013-01-03,1,['93.080.10'],ISO/TC 195,9599,,[72522],['en'],4,

6160,IS,,ISO 1565:1978,Dental silicate cement (hand mixed),Ciments dentaires aux silicates (mélange manuel),1978-06-01,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[17800],"['en','fr']",9,

28595,IS,,ISO 15652:2003,Small craft — Remote steering systems for inboard mini jet boats,Petits navires — Appareils à gouverner commandés à distance pour petites embarcations à tuyère intérieure,2003-11-06,1,['47.080'],ISO/TC 188,9599,,"[75540,75467]","['en','fr']",7,"<p>ISO 15652:2003 specifies the minimum level of requirements for construction, operation and installation of remote steering systems for all small inboard jet boats weighing less than 1 000 kg, excluding water scooters.</p>"

41856,IS,,ISO 15653:2010,Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds,Matériaux métalliques — Méthode d'essai pour la détermination de la ténacité quasi statique à la rupture des soudures,2010-04-30,1,['25.160.40'],ISO/TC 164/SC 4,9599,,[70865],"['en','fr']",41,"<p>ISO 15653:2010 specifies methods for determining fracture toughness in terms of <i>K</i> (stress intensity factor), <i>δ</i> (crack tip opening displacement, CTOD) and <i>J</i> (experimental equivalent of the <i>J</i>‑integral) for welds in metallic materials.</p><p>ISO 15653 is complementary to ISO 12135, which covers all aspects of fracture toughness testing of parent metal

27804,IS,,ISO 15654:2004,Fatigue test method for transmission precision roller chains,Méthode d'essai de fatigue pour chaînes de transmission de précision à rouleaux,2004-05-04,1,['21.220.30'],ISO/TC 100,9599,,[50842],"['en','fr']",47,"<p>ISO 15654:2004 specifies an axial force fatigue test method for transmission roller chains, the tests being of the fluctuating tension type, carried out at room temperature in air, with the force applied along the longitudinal axis of the chain. It also specifies procedures for statistically analyzing the test results and gives formats and elements for presenting the results of fatigue tests and analyses.</p>"

6161,IS,,ISO 1566:1978,Dental zinc phosphate cement,Ciments dentaires au phosphate de zinc,1978-06-01,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[17800],"['en','fr']",9,

28625,IS,,ISO 15663-1:2000,Petroleum and natural gas industries — Life cycle costing — Part 1: Methodology,Industries du pétrole et du gaz naturel — Estimation des coûts globaux de production et de traitement — Partie 1: Méthodologie,2000-07-27,1,['75.020'],ISO/TC 67,9599,,[79198],"['en','fr']",17,

28626,IS,,ISO 15663-2:2001,Petroleum and natural gas industries — Life-cycle costing — Part 2: Guidance on application of methodology and calculation methods,Industries du pétrole et du gaz naturel — Estimation des coûts globaux de production et de traitement — Partie 2: Lignes directrices relatives à l'application de la méthodologie et aux méthodes de calcul,2001-09-27,1,['75.020'],ISO/TC 67,9599,,[79198],['en'],29,"<p>This part of ISO 15663 provides guidance on application of the methodology for life-cycle costing for the development</p><p>and operation of facilities for drilling, production and pipeline transportation within the petroleum and natural gas industries.</p><p>This part of IS

28627,IS,,ISO 15663-3:2001,Petroleum and natural gas industries — Life-cycle costing — Part 3: Implementation guidelines,Industries du pétrole et du gaz naturel — Estimation des coûts globaux de production et de traitement — Partie 3: Lignes directrices sur la mise en oeuvre,2001-08-30,1,['75.020'],ISO/TC 67,9599,,[79198],['en'],31,"<p><b>1 Scope</b></p><p>This part of ISO 15663 provides guidelines for the implementation of life-cycle costing for the development and</p><p>operation of the facilities for drilling, production and pipeline transportation within the petroleum and natural gas</p><p>industries. This part of ISO 15663 is applicable when making decisions on any option which has cos

28628,IS,,ISO 15664:2001,Acoustics — Noise control design procedures for open plant,Acoustique — Modes opératoires de contrôle du bruit dans les installations ouvertes,2001-05-10,1,['17.140.20'],ISO/TC 43/SC 1,9599,,[86002],"['en','fr']",24,"<p>This International Standard defines the procedures for noise control of mainly open plants.</p><p>It is applicable to the following:</p><p>_ specification of procedures for noise control during engineering of a new plant and modification/extension of</p><p>existing plants (construction noise procedures are outside the scope of this International Standard but should</p><p>be considered);</p><p>_ definition of responsibilities of parties involved, viz.

28629,IS,,ISO 15665:2003,"Acoustics — Acoustic insulation for pipes, valves and flanges","Acoustique — Isolation acoustique des tuyaux, clapets et brides",2003-08-21,1,"['91.120.20','17.140.20']",ISO/TC 43/SC 1,9599,,[77373],"['en','fr']",36,"<p>ISO 15665:2003 defines the acoustic performance of three classes (classes A, B and C) of pipe insulation. It also specifies three types of construction that will meet these acoustic performance classes. Furthermore, it defines a standardized test method for measuring the acoustic performance of any type of construction, thereby allowing existing and new insulation constructions to be rated against the three classes.</p><p>ISO 15665:2003 is applicable

40116,IS,Cor,ISO 15665:2003/Cor 1:2004,"Acoustics — Acoustic insulation for pipes, valves and flanges — Technical Corrigendum 1","Acoustique — Isolation acoustique des tuyaux, clapets et brides — Rectificatif technique 1",2004-03-22,1,"['91.120.20','17.140.20']",ISO/TC 43/SC 1,9599,,[77373],"['en','fr']",1,

25908,IS,,ISO 15668:1999,Banking — Secure file transfer (retail),Banque — Transfert de fichier de sécurité (services aux particuliers),1999-12-09,1,['35.240.15'],ISO/TC 68/SC 2,9599,,[42334],['en'],33,

6162,IS,,ISO 1567:1978,Denture base resin,Résines pour bases de prothèses dentaires,1978-12-01,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[6163],"['en','fr']",8,

6163,IS,,ISO 1567:1988,Dentistry — Denture base polymers,Art dentaire — Polymères pour base de prothèses dentaires,1988-10-20,2,['11.060.10'],ISO/TC 106/SC 2,9599,[6162],[20266],"['en','fr']",9,

20266,IS,,ISO 1567:1999,Dentistry — Denture base polymers,Art dentaire — Polymères pour base de prothèses dentaires,1999-02-11,3,['11.060.10'],ISO/TC 106/SC 2,9599,[6163],[39740],"['en','fr']",27,

35350,IS,Amd,ISO 1567:1999/Amd 1:2003,Dentistry — Denture base polymers — Amendment 1,Art dentaire — Polymères pour base de prothèses dentaires — Amendement 1,2003-08-22,3,['11.060.10'],ISO/TC 106/SC 2,9599,,[39740],['en'],4,

27438,IS,,ISO 15671:2000,Rubber and rubber additives — Determination of total sulfur content using an automatic analyser,Caoutchouc et additifs pour caoutchouc — Dosage du soufre total à l'aide d'un analyseur automatique,2000-07-27,1,['83.060'],ISO/TC 45/SC 2,9599,,[74946],['en'],5,<p>This International Standard specifies an instrumental (automatic analyser) method for the determination of total sulfur</p><p>in rubber and rubber additives.</p>

36354,IS,,ISO 15673:2005,Guidelines for the simplified design of structural reinforced concrete for buildings,Lignes directrices pour la conception simplifiée du béton armé pour les structures de bâtiments,2005-07-20,1,['91.080.40'],ISO/TC 71/SC 5,9599,,[54095],['en'],172,"<p>ISO 15673:2005 applies to the planning, design and construction of structural reinforced concrete structures to be used in new low-rise buildings with restricted occupancy, number of stories, and area. The purpose of ISO 15673:2005 is to provide a registered civil engineer or architect with sufficient information to design the reinforced-concrete structural framing of a low-rise building that complies with these limitat

28680,IS,,ISO 15674:2001,Cardiovascular implants and artificial organs — Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags,Implants cardiovasculaires et organes artificiels — Systèmes réservoirs de cardiotomie/veineux à paroi dure (avec/sans filtre) et sacs réservoirs veineux mous,2001-11-15,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[51031],['en'],9,

51031,IS,,ISO 15674:2009,Cardiovascular implants and artificial organs — Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags,Implants cardiovasculaires et organes artificiels — Systèmes réservoirs de cardiotomie/veineux à paroi dure (avec/sans filtre) et sacs réservoirs veineux mous,2009-03-30,2,['11.040.40'],ISO/TC 150/SC 2,9599,[28680],[67608],"['en','ru']",9,"<p>ISO 15674:2009 specifies requirements for sterile, single-use, extracorporeal hard-shell cardiotomy/venous reservoir systems and soft venous reservoir bags intended for use as a blood reservoir during cardiopulmonary bypass (CPB) surgery.</p><p>ISO 15674:2009 applies only to the bloo

28681,IS,,ISO 15675:2001,Cardiovascular implants and artificial organs — Cardiopulmonary bypass systems — Arterial line blood filters,Implants cardiovasculaires et organes artificiels — Systèmes de pontage cardio-pulmonaire — Filtres sanguins pour la ligne artérielle,2001-10-18,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[51032],['en'],9,

51032,IS,,ISO 15675:2009,Cardiovascular implants and artificial organs — Cardiopulmonary bypass systems — Arterial blood line filters,Implants cardiovasculaires et organes artificiels — Systèmes de pontage cardio-pulmonaire — Filtres en ligne pour sang artériel,2009-03-30,2,['11.040.40'],ISO/TC 150/SC 2,9599,[28681],[67609],"['en','ru']",9,"<p>ISO 15675:2009 specifies requirements for sterile, single-use, arterial blood line filters intended to filter and remove emboli, debris, blood clots and other potentially hazardous solid and gaseous material from the blood of humans during cardiopulmonary bypass surgery.</p>"

40142,IS,,ISO 15676:2005,Cardiovascular implants and artificial organs — Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO),Implants cardiovasculaires et organes artificiels — Exigences pour les paquets de tubes à usage unique pour pontage cardiopulmonaire et oxygénation des membranes extracorporelles,2005-08-05,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[66311],"['en','ru']",8,"<p>ISO 15676:2005 specifies requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO). ISO 15676:2005 is applicable to all medical tubing intended for cardiopulmonary bypass (CPB) and/or extracorporeal

35051,IS,,ISO 15681-2:2003,Water quality — Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) — Part 2: Method by continuous flow analysis (CFA),Qualité de l'eau — Dosage des orthophosphates et du phosphore total par analyse en flux (FIA et CFA) — Partie 2: Méthode par analyse en flux continu (CFA),2003-12-10,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[66474],"['en','fr']",16,"<p>ISO 15681-2:2003 specifies CFA methods for the determination of orthophosphate in the mass concentration range from 0,01 mg/l to 1,00 mg/l P, and total phosphorus in the mass concentration range from 0,10 mg/l to 10,0 mg/l P. The method includes the digestion of organic phosphoru

25612,IS,,ISO 15685:2004,Soil quality — Determination of potential nitrification and inhibition of nitrification — Rapid test by ammonium oxidation,Qualité du sol — Détermination de la nitrification potentielle et inhibition de la nitrification — Essai rapide par oxydation de l'ammonium,2004-03-30,1,['13.080.30'],ISO/TC 190/SC 4,9599,,[53530],['en'],8,"<p>ISO 15685:2004 specifies a rapid method for the determination of the potential rate of ammonium oxidation and inhibition of nitrification in soils. This method is suitable for all soils containing a population of nitrifying microorganisms. It can be used as a rapid screening test for monitoring soil quality and quality of wastes, and is su

28702,IS,,ISO 15686-1:2000,Buildings and constructed assets — Service life planning — Part 1: General principles,Bâtiments et biens immobiliers construits — Prévision de la durée de vie — Partie 1: Principes généraux,2000-09-07,1,['91.040.01'],ISO/TC 59/SC 14,9599,,[45798],"['en','fr']",41,

29429,IS,,ISO 15686-2:2001,Buildings and constructed assets — Service life planning — Part 2: Service life prediction procedures,Bâtiments et biens immobiliers construits — Prévision de la durée de vie — Partie 2: Procédures pour la prévision de la durée de vie,2001-03-15,1,['91.040.01'],ISO/TC 59/SC 14,9599,,[51826],"['en','fr']",24,

39843,IS,,ISO 15686-5:2008,Buildings and constructed assets — Service-life planning — Part 5: Life-cycle costing,Bâtiments et biens immobiliers construits — Prévision de la durée de vie — Partie 5: Approche en coût global,2008-06-10,1,['91.040.01'],ISO/TC 59/SC 14,9599,,[61148],"['en','fr']",41,<p>ISO 15686-5:2008 gives guidelines for performing life cycle cost (LCC) analyses of buildings and constructed assets and their parts.</p>

35874,IS,,ISO 15686-7:2006,Buildings and constructed assets — Service life planning — Part 7: Performance evaluation for feedback of service life data from practice,"Bâtiments et biens immobiliers construits — Prévision de la durée de vie — Partie 7: Évaluation de la performance de l'information en retour relative à la durée de vie, issue de la pratique",2006-02-28,1,['91.040.01'],ISO/TC 59/SC 14,9599,,[61149],['en'],28,"<p>ISO 15686-7:2006 provides a generic basis for performance evaluation for feedback of service life data from existing buildings and constructed assets, including a definition of the terms to be used and the description of how the (technical) performance can be described an

28519,IS,,ISO 15688:2003,Road construction and maintenance equipment — Soil stabilizers — Terminology and commercial specifications,Équipement de construction et d'entretien des routes — Stabilisateurs du sol — Terminologie et spécifications commerciales,2003-05-07,1,"['93.080.10','01.040.91']",ISO/TC 195,9599,,[55297],['en'],21,"<p>ISO 15688:2003 establishes the terminology for soil stabilizers and their components, and gives requirements for operation and commercial specifications.</p><p>It is applicable to soil stabilizers intended for road construction and pavement works.</p>"

3987,IS,,ISO 157:1975,Hard coal — Determination of forms of sulphur,Houille — Détermination de la teneur en différentes formes de soufre,1975-01-01,1,['73.040'],ISO/TC 27/SC 5,9599,,[3988],"['en','fr']",10,

3988,IS,,ISO 157:1996,Coal — Determination of forms of sulfur,Charbon — Détermination de la teneur en différentes formes de soufre,1996-05-23,2,['73.040'],ISO/TC 27/SC 5,9599,[3987],[86979],"['en','fr']",15,"<p>Specifies methods of determining the sulfate and pyrite sulfur contents of coals, including brown coals and methods of calculating the amount of organic sulfur present. Replaces the first edition.</p>"