Withdrawn and superseded ISO standards — page 49 of 246

29889,IS,,ISO 15156-2:2003,"Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons","Industries du pétrole et du gaz naturel — Matériaux pour utilisation dans des environnements contenant de l'hydrogène sulfuré (H2S) dans la production de pétrole et de gaz — Partie 2: Aciers au carbone et aciers faiblement alliés résistants à la fissuration, et utilisation de fontes",2003-12-05,1,['75.180.01'],ISO/TC 67,9599,,[53605],"['en','ru']",44,"<p>ISO 15156-2:2003 gives requirements and recommendations for the selection and qualification of carbon and low alloy

42710,IS,Cor,ISO 15156-2:2003/Cor 1:2005,"Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons — Technical Corrigendum 1","Industries du pétrole et du gaz naturel — Matériaux pour utilisation dans des environnements contenant de l'hydrogène sulfuré (H2S) dans la production de pétrole et de gaz — Partie 2: Aciers au carbone et aciers faiblement alliés résistants à la fissuration, et utilisation de fontes — Rectificatif technique 1",2005-09-01,1,['75.180.01'],ISO/TC 67,9599,,[53605],"['en','ru']",5,

53605,IS,,ISO 15156-2:2009,"Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons","Industries du pétrole et du gaz naturel — Matériaux pour utilisation dans des environnements contenant de l'hydrogène sulfuré (H2S) dans la production de pétrole et de gaz — Partie 2: Aciers au carbone et aciers faiblement alliés résistants à la fissuration, et utilisation de fontes",2009-10-14,2,['75.180.01'],ISO/TC 67,9599,"[29889,42710]",[66641],"['en','fr']",45,"<p>ISO 15156-2:2009 gives requirements and recommendations for the selection and qualification of carbo

66641,IS,,ISO 15156-2:2015,"Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons","Industries du pétrole et du gaz naturel — Matériaux pour utilisation dans des environnements contenant de l'hydrogène sulfuré (H2S) dans la production de pétrole et de gaz — Partie 2: Aciers au carbone et aciers faiblement alliés résistants à la fissuration, et utilisation de fontes",2015-08-20,3,['75.180.01'],ISO/TC 67,9599,[53605],[79659],['en'],45,"<p>ISO 15156-2:2015 gives requirements and recommendations for the selection and qualification of carbon and low-alloy

29890,IS,,ISO 15156-3:2003,Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys,Industries du pétrole et du gaz naturel — Matériaux pour utilisation dans des environnements contenant de l'hydrogène sulfuré (H2S) dans la production de pétrole et de gaz — Partie 3: ARC (alliages résistants à la corrosion) et autres alliages résistants à la fissuration,2003-12-09,1,['75.180.01'],ISO/TC 67,9599,,[53606],['en'],72,"<p>ISO 15156-3:2003 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other all

41857,IS,Cor,ISO 15156-3:2003/Cor 1:2005,Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys — Technical Corrigendum 1,Industries du pétrole et du gaz naturel — Matériaux pour utilisation dans des environnements contenant de l'hydrogène sulfuré (H2S) dans la production de pétrole et de gaz — Partie 3: ARC (alliages résistants à la corrosion) et autres alliages résistants à la fissuration — Rectificatif technique 1,2005-02-17,1,['75.180.01'],ISO/TC 67,9599,,[53606],['en'],2,

42711,IS,Cor,ISO 15156-3:2003/Cor 2:2005,Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys — Technical Corrigendum 2,Industries du pétrole et du gaz naturel — Matériaux pour utilisation dans des environnements contenant de l'hydrogène sulfuré (H2S) dans la production de pétrole et de gaz — Partie 3: ARC (alliages résistants à la corrosion) et autres alliages résistants à la fissuration — Rectificatif technique 2,2005-09-01,1,['75.180.01'],ISO/TC 67,9599,,[53606],['en'],18,

53606,IS,,ISO 15156-3:2009,Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys,Industries du pétrole et du gaz naturel — Matériaux pour utilisation dans des environnements contenant de l'hydrogène sulfuré (H2S) dans la production de pétrole et de gaz — Partie 3: ARC (alliages résistants à la corrosion) et autres alliages résistants à la fissuration,2009-10-14,2,['75.180.01'],ISO/TC 67,9599,"[41857,29890,42711]",[66642],"['en','fr']",73,"<p>ISO 15156-3:2009 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-res

66642,IS,,ISO 15156-3:2015,Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys,Industries du pétrole et du gaz naturel — Matériaux pour utilisation dans des environnements contenant de l'hydrogène sulfuré (H2S) dans la production de pétrole et de gaz — Partie 3: ARC (alliages résistants à la corrosion) et autres alliages résistants à la fissuration,2015-08-20,3,['75.180.01'],ISO/TC 67,9599,[53606],[79660],['en'],85,"<p>ISO 15156-3:2015 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and ot

6108,IS,,ISO 1516:1981,"Paints, varnishes, petroleum and related products — Flash/no flash test — Closed cup equilibrium method","Peintures, vernis, produits pétroliers et assimilés — Essai de point d'éclair par tout ou rien — Méthode à l'équilibre en vase clos",1981-07-01,2,"['75.080','87.040']",ISO/TC 28,9599,,[28656],"['en','fr']",5,"<p>Specifies a method to determiine if a flammable material, when maintained at a selected equilibrium temperature and under the conditions of the test, gives off sufficient flammable vapour at this temperature to cause ignition on application of an external source of flame applied in a standard manner. The method is suitable for use over the temperature rang

6109,IS,,ISO 1517:1973,Paints and varnishes — Surface-drying test — Ballotini method,Peintures et vernis — Détermination de la durée de séchage en surface — Méthode aux billes en verre,1973-12-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[51943],"['en','fr']",2,<p>Method of test for the determination of the surface-drying characteristics of a coating material which dries by the action of air or by chemical reaction of its components. The test may be carried out after a specified time or at suitable intervals. The procedure is not intended to apply to stoving products.</p>

29541,IS,,ISO 15171-2:2000,Connections for fluid power and general use — Hydraulic couplings for diagnostic purposes — Part 2: Coupling with M16 x 2 end for connection under pressure,Raccordements pour transmissions hydrauliques et pneumatiques et usage général — Raccords hydrauliques pour diagnostics — Partie 2: Raccord avec extrémité M16 x 2 pour connexion sous pression,2000-08-10,1,['23.100.40'],ISO/TC 131/SC 4,9599,,[62095],"['en','fr']",5,

26071,IS,,ISO 15174:2002,Milk and milk products — Microbial coagulants — Determination of total milk-clotting activity,Lait et produits laitiers — Coagulants microbiens — Détermination de l'activité totale de coagulation du lait,2002-09-26,1,"['67.100.10','07.100.30']",ISO/TC 34/SC 5,9599,,[55373],"['en','fr']",8,"<p>ISO 15174|IDF 176:2002 describes a method to compare the total milk-clotting activity of a microbial coagulant sample with the milk-clotting activity of an international microbial coagulant reference standard on a standard milk substrate prepared with a calcium chloride solution containing 0,5 g/l of calcium chloride (pH approximately 6,5).</p>"

39519,IS,,ISO 15175:2004,Soil quality — Characterization of soil related to groundwater protection,Qualité du sol — Caractérisation des sols en relation avec la nappe phréatique,2004-05-17,1,['13.080.40'],ISO/TC 190/SC 7,9599,,"[68253,62602,51020]","['en','fr']",58,"<p>ISO 15175:2004 provides guidance on the principles behind, and main methods for, the evaluation of sites, soils, and soil materials in relation to their role as a source of contamination of groundwater and their function in transporting, degrading and transforming contaminants. It identifies and lists relevant monitoring strategies, methods for sampling, soil processing and analytical methods. </p><p>ISO 15175:2004 is applicab

26680,IS,,ISO 15176:2002,Soil quality — Characterization of excavated soil and other soil materials intended for re-use,Qualité du sol — Caractérisation de la terre excavée et d'autres matériaux du sol destinés à la réutilisation,2002-10-10,1,['13.080.99'],ISO/TC 190/SC 7,9599,,"[62603,70771]","['en','fr']",50,"<p>ISO 15176:2002 provides guidance on the range of tests that may be necessary to characterize soil materials intended to be excavated and re-used with, or without, preliminary treatment. Soil materials include excavated soil, dredged materials, fill materials, manufactured soils and soil treated to remove or destroy contaminants.</p><p>It takes into account the different requirement

55378,IS,,ISO 15177:2012,Hot-rolled twin-roll cast carbon steel sheet of commercial quality,Tôles en acier de qualité commerciale laminées à chaud par coulée entre cylindres,2012-03-09,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[74888],['en'],8,"<p>This International Standard specifies the characteristics of hot-rolled twin-roll cast carbon steel sheet of commercial quality produced by the twin-roll cast process. Hot-rolled twin-roll cast steel sheet is suitable for many applications where the presence of oxide or scale or normal surface imperfections disclosed after removal of oxide or scale, are not objectionable. It is not suitable for applications where the surface is of prime importance.</p>

55379,IS,,ISO 15179:2012,Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel,Tôles en acier de construction et en acier à haute résistance laminées à chaud par coulée entre cylindres,2012-03-09,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[74889],['en'],9,"<p>This International Standard specifies the characteristics of hot-rolled twin-roll cast steel sheet of structural quality and high strength steel. The product is intended for applications where specific mechanical properties are required. It is generally used in the delivered condition and is intended for bolted, riveted or welded structures. This product is produced on a wide strip mill, not a plate mill.</p><p

59590,IS,,ISO 1518-1:2011,Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method,Peintures et vernis — Détermination de la résistance à la rayure — Partie 1: Méthode à charge constante,2011-05-19,1,['87.040'],ISO/TC 35/SC 9,9599,"[6111,50483]",[73853],"['en','fr','ru']",7,"<p>ISO 1518-1:2011 specifies a test method for determining under defined conditions the resistance of a single coating or a multi-coat system of paint, varnish or related product to penetration by scratching with a scratch stylus loaded with a specified load. Penetration of the stylus is to the substrate, except in the case of a multi-coat system, in which case the stylus can penetrate

73853,IS,,ISO 1518-1:2019,Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method,Peintures et vernis — Détermination de la résistance à la rayure — Partie 1: Méthode à charge constante,2019-06-04,2,['87.040'],ISO/TC 35/SC 9,9599,[59590],[83330],"['en','fr']",8,"<p>This document specifies a test method for determining under defined conditions the resistance of a single coating or a multi-coat system of paint, varnish or related product to penetration by scratching with a scratch stylus loaded with a specified load. Penetration of the stylus is to the substrate, except in the case of a multi-coat system, in which case the stylus can penetrate either to the

6110,IS,,ISO 1518:1973,Paints and varnishes — Scratch test,Peintures et vernis — Essai de rayure,1973-12-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[6111],['en'],5,

6111,IS,,ISO 1518:1992,Paints and varnishes — Scratch test,Peintures et vernis — Essai de rayure,1992-03-19,2,['87.040'],ISO/TC 35/SC 9,9599,[6110],"[50483,59590]","['en','fr']",7,"<p>Specifies a test method for determining under defined conditions the resistance of a single coating or a multi-coat system of paint, varnish or related product to penetration by scratching with a hemispherically tipped needle.</p>"

59596,IS,,ISO 1518-2:2011,Paints and varnishes — Determination of scratch resistance — Part 2: Variable-loading method,Peintures et vernis — Détermination de la résistance à la rayure — Partie 2: Méthode à charge variable,2011-10-06,1,['87.040'],ISO/TC 35/SC 9,9599,"[23681,50489]",[73855],"['en','fr','ru']",8,"<p>ISO 1518-2:2011 specifies a method for determining, using a pointed stylus loaded with a continuously increasing load, the scratch resistance of a single coating of a paint, varnish or related product, or the upper layer of a multicoat system.</p><p>This test has been found to be useful in comparing the scratch resistance of different coatings. It is most useful in providing relativ

25553,IS,,ISO 15181-1:2000,Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 1: General method for extraction of biocides,Peintures et vernis — Détermination du taux de lixiviation des biocides contenus dans la peinture antisalissure — Partie 1: Méthode générale d'extraction des biocides,2000-11-23,1,['87.040'],ISO/TC 35/SC 9,9599,,[42867],"['en','fr']",7,

26701,IS,,ISO 15181-2:2000,Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate,Peintures et vernis — Détermination du taux de lixiviation des biocides contenus dans la peinture antisalissure — Partie 2: Détermination de la concentration ionique du cuivre dans l'extrait et calcul du taux de lixiviation,2000-11-23,1,['87.040'],ISO/TC 35/SC 9,9599,,[42868],"['en','fr']",9,

25759,IS,,ISO 15184:1998,Paints and varnishes — Determination of film hardness by pencil test,Peintures et vernis — Détermination de la dureté du feuil par l'essai de dureté crayon,1998-10-29,1,['87.040'],ISO/TC 35/SC 9,9599,,[55329],['en'],7,

55329,IS,,ISO 15184:2012,Paints and varnishes — Determination of film hardness by pencil test,Peintures et vernis — Détermination de la dureté du feuil par l'essai de dureté crayon,2012-10-03,2,['87.040'],ISO/TC 35/SC 9,9599,[25759],[76044],"['en','fr']",7,"<p>ISO 15184:2012 specifies a method for determining the film hardness by pushing pencils of known hardness over the film.</p><p>The test can be performed on a single coating of a paint, varnish or related product, or on the upper layer of a multi-coat system.</p><p>This rapid test has not been found to be useful in comparing the pencil hardness of different coatings. It is more useful in providing relative ratings for a series of coated

26301,IS,,ISO 15189:2003,Medical laboratories — Particular requirements for quality and competence,Laboratoires d'analyses de biologie médicale — Exigences particulières concernant la qualité et la compétence,2003-02-10,1,"['03.120.10','11.100.01']",ISO/TC 212,9599,,[42641],"['en','fr']",39,<p>ISO 15189:2003 specifies requirements for quality and competence particular to medical laboratories. </p>

42641,IS,,ISO 15189:2007,Medical laboratories — Particular requirements for quality and competence,Laboratoires d'analyses de biologie médicale — Exigences particulières concernant la qualité et la compétence,2007-04-19,2,"['03.120.10','11.100.01']",ISO/TC 212,9599,"[42640,26301]",[56115],"['en','fr','ru']",40,"<p>ISO 15189:2007 specifies requirements for quality and competence particular to medical laboratories.</p><p>ISO 15189:2007 is for use by medical laboratories in developing their quality

56115,IS,,ISO 15189:2012,Medical laboratories — Requirements for quality and competence,Laboratoires de biologie médicale — Exigences concernant la qualité et la compétence,2012-11-05,3,"['03.120.10','11.100.01']",ISO/TC 212,9599,[42641],[76677],"['ar','en','fr','ru']",53,"<p>ISO 15189:2012 specifies requirements for quality and competence in medical laboratories.</p><p>ISO 15189:2012 can be used by medical laboratories in developing their quality management systems and assessing their own compe

6112,IS,,ISO 1519:1973,Paints and varnishes — Bend test (cylindrical mandrel),Peintures et vernis — Essai de pliage sur mandrin cylindrique,1973-12-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[28226],"['en','fr']",5,<p>Empirial test procedure for assessing the resistance of a single coating or for a multicoat system to cracking and/or detachment from a metal substrate when subjected to bending round a cylindrical mandrel under standard conditions. The method of test specified may be carried out either with a single specified size of mandrel or by repeating the procedure using successively smaller mandrels. Two types of apparatus are specified.</p>

28226,IS,,ISO 1519:2002,Paints and varnishes — Bend test (cylindrical mandrel),Peintures et vernis — Essai de pliage sur mandrin cylindrique,2002-03-14,2,['87.040'],ISO/TC 35/SC 9,9599,[6112],[50485],"['en','fr']",8,"<p>This International Standard specifies an empirical test procedure for assessing the resistance of a coating of paint, varnish or related product to cracking and/or detachment from a metal or plastic substrate when subjected to bending round a cylindrical mandrel under standard conditions.</p><p>For a multicoat system, each coat may be tested separately or the complete system may be tested.</p><p>The method specified may be carried out either as a 'go/no go' test, by carrying

38477,IS,,ISO 15190:2003,Medical laboratories — Requirements for safety,Laboratoires de médecine — Exigences pour la sécurité,2003-10-27,1,['11.100.01'],ISO/TC 212,9599,,"[72191,51983]",['en'],39,<p>ISO 15190:2003 specifies requirements for safe practices in the medical laboratory.</p>

50389,IS,,ISO 15192:2010,Soil quality — Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection,Qualité du sol — Dosage du chrome(VI) dans les matériaux solides par digestion alcaline et chromatographie ionique avec détection spectrophotométrique,2010-11-05,1,['13.080.10'],ISO/TC 190/SC 3,9599,,[76521],"['en','fr']",23,"<p>ISO 15192:2010 specifies a method for the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography with spectrophotometric detection. This method can be used to determine Cr(VI) mass fractions in solids greater than 0,1 mg/kg.</p>"

76521,IS,,ISO 15192:2021,Soil and waste — Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection,Déchets et sols — Dosage du chrome(VI) dans les matériaux solides par digestion alcaline et chromatographie ionique avec détection spectrophotométrique,2021-06-21,2,['13.080.10'],ISO/TC 190/SC 3,9599,[50389],[85838],"['en','fr']",24,"<p>This document specifies the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography with spectrophotometric detection. This method can be used to determine Cr(VI)-mass fractions in solids higher than 0,1 mg/kg.</p><p>NOTE In case of reducing

26305,IS,,ISO 15193:2002,In vitro diagnostic medical devices — Measurement of quantities in samples of biological origin — Presentation of reference measurement procedures,Dispositifs médicaux de diagnostic in vitro — Mesure des grandeurs dans des échantillons d'origine biologique — Présentation des modes opératoires de mesure de référence,2002-10-22,1,['11.100.10'],ISO/TC 212,9599,,[42021],"['en','fr']",16,"<p>ISO 15193:2002 specifies requirements for the drafting of a reference measurement procedure.</p><p>It is applicable to any person, body, or institution, involved in one of the various branches of laboratory medicine, intending to write a document to serve as a reference measurement pr

42021,IS,,ISO 15193:2009,In vitro diagnostic medical devices — Measurement of quantities in samples of biological origin — Requirements for content and presentation of reference measurement procedures,Dispositifs médicaux de diagnostic in vitro — Mesurage des grandeurs dans des échantillons d'origine biologique — Exigences relatives au contenu et à la présentation des procédures de mesure de référence,2009-04-28,2,['11.100.10'],ISO/TC 212,9599,[26305],[82665],"['en','fr','ru']",19,"<p>ISO 15193:2009 specifies requirements for the content of a reference measurement procedure for <i>in vitro</i> diagnostic medical devices and medical laboratories.</p><p>ISO 15193:2009 applies to reference meas

26306,IS,,ISO 15194:2002,In vitro diagnostic medical devices — Measurement of quantities in samples of biological origin — Description of reference materials,Dispositifs médicaux de diagnostic in vitro — Mesure des grandeurs dans les échantillons d'origine biologique — Description des matériaux de référence,2002-10-10,1,['11.100.10'],ISO/TC 212,9599,,[42022],"['en','fr']",14,"<p>ISO 15194:2002 specifies requirements and formats for the description of reference materials. It is applicable to reference materials of higher metrological order, classifiable as primary measurement standards and secondary measurement standards that function either as calibrators or control materials for reference m

42022,IS,,ISO 15194:2009,In vitro diagnostic medical devices — Measurement of quantities in samples of biological origin — Requirements for certified reference materials and the content of supporting documentation,Dispositifs médicaux de diagnostic in vitro — Mesurage des grandeurs dans les échantillons d'origine biologique — Exigences relatives aux matériaux de référence certifiés et au contenu de la documentation associée,2009-04-28,2,['11.100.10'],ISO/TC 212,9599,[26306],[82666],"['en','fr','ru']",16,"<p>ISO 15194:2009 specifies requirements for certified reference materials and the content of their supporting documentation, in order for them to be considered of higher metrological order

38363,IS,,ISO 15195:2003,Laboratory medicine — Requirements for reference measurement laboratories,Biologie médicale — Exigences requises à l'égard de laboratoires réalisant des mesures de référence,2003-10-14,1,['11.100.99'],ISO/TC 212,9599,,[69824],"['en','fr']",12,<p>ISO 15195:2003 gives the specific requirements for reference measurement laboratories in laboratory medicine. Examinations of properties with results reported on a nominal or ordinal scale are not included.</p><p>ISO 15195:2003 is not applicable to routine medical laboratories.</p><p>The general requirements for the competence of calibration laboratories are laid down in ISO/IEC 17025 for testing and calibration laboratories.

26309,IS,,ISO 15197:2003,In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus,Systèmes d'essais de diagnostic in vitro — Exigences relatives aux systèmes d'autosurveillance de la glycémie destinés à la prise en charge du diabète sucré,2003-04-28,1,['11.100.10'],ISO/TC 212,9599,,[54976],"['en','fr']",33,"<p>ISO 15197:2003 specifies requirements for <i>in vitro</i> glucose monitoring systems that measure glucose concentrations in capillary blood samples and procedures for the verification and the validation of performance by the intended users. These systems are intended for self-testing by laypersons for management

6113,IS,,ISO 1520:1973,Paints and varnishes — Cupping test,Peintures et vernis — Essai d'emboutissage,1973-12-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[26621],"['en','fr']",3,

26621,IS,,ISO 1520:1999,Paints and varnishes — Cupping test,Peintures et vernis — Essai d'emboutissage,1999-02-04,2,['87.040'],ISO/TC 35/SC 9,9599,[6113],[40923],"['en','fr']",7,

26259,IS,,ISO 15202-1:2000,Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 1: Sampling,Air des lieux de travail — Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie d'émission atomique avec plasma à couplage inductif — Partie 1: Échantillonnage,2000-02-17,1,['13.040.30'],ISO/TC 146/SC 2,9599,,[51315],"['en','fr']",17,

51315,IS,,ISO 15202-1:2012,Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 1: Sampling,Air des lieux de travail — Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie d'émission atomique avec plasma à couplage inductif — Partie 1: Échantillonnage,2012-06-01,2,['13.040.30'],ISO/TC 146/SC 2,9599,[26259],[74937],"['en','fr']",19,"<p>ISO 15202-1:2012 specifies a method for collecting samples of airborne particulate matter for subsequent determination of metals and metalloids using inductively coupled plasma ? atomic emission spectrometry (ICP-A

27291,IS,,ISO 15202-2:2001,Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 2: Sample preparation,Air des lieux de travail — Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie d'émission atomique avec plasma à couplage inductif — Partie 2: Préparation des échantillons,2001-08-16,1,['13.040.30'],ISO/TC 146/SC 2,9599,,[51316],"['en','fr']",38,

51316,IS,,ISO 15202-2:2012,Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 2: Sample preparation,Air des lieux de travail — Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie d'émission atomique avec plasma à couplage inductif — Partie 2: Préparation des échantillons,2012-01-23,2,['13.040.30'],ISO/TC 146/SC 2,9599,[27291],[74938],"['en','fr']",47,"<p><b>1.1 </b>This part of ISO 15202 specifies a number of suitable methods for preparing test solutions from samples</p><p>of airborne particulate matter collected using the method specified in

55380,IS,,ISO 15208:2012,Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality,"Tôles coulées entre cylindres et galvanisées en continu par immersion à chaud, en acier de qualité commerciale",2012-03-09,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[74890],['en'],11,"<p>This International Standard specifies the characteristics of continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality manufactured using the twin-roll cast steel-making process.</p><p>The product is intended for applications where resistance to corrosion is of prime importance.</p><p>The steel sheet is produced in a number of coating mass, surface treatments and ordering conditions.</p

6115,IS,,ISO 1521:1973,Paints and varnishes — Determination of resistance to water — Water immersion method,Peintures et vernis — Détermination de la résistance à l'eau — Méthode par immersion dans l'eau,1973-12-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[7807],"['en','fr']",2,

55381,IS,,ISO 15211:2012,Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel,"Tôles coulées entre cylindres et galvanisées en continu par immersion à chaud, de qualité destinée à la construction et en acier à haute résistance",2012-03-09,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[74891],['en'],14,"<p>This International Standard specifies the characteristics of continuous hot-dip zinc-coated twin-roll cast steel sheet products of structural quality and high strength steel.</p><p>The product is intended for applications where resistance to corrosion is of prime importance.</p><p>The steel sheet is produced in a number of grades, coating mass, ord

26852,IS,,ISO 15213:2003,Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions,Microbiologie des aliments — Méthode horizontale pour le dénombrement des bactéries sulfito-réductrices se développant en conditions anaérobies,2003-05-08,1,['07.100.30'],ISO/TC 34/SC 9,9599,,[67050],"['en','fr']",6,"<p>ISO 15213:2003 specifies a horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions. It is applicable to</p><ul><li>products intended for human consumption and the feeding of animals, and</li><li>environmental samples in the area of food production and food h

6116,IS,,ISO 1522:1973,Paints and varnishes — Pendulum damping test,Peintures et vernis — Essai d'amortissement du pendule,1973-12-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[24923],"['en','fr']",4,

24923,IS,,ISO 1522:1998,Paints and varnishes — Pendulum damping test,Peintures et vernis — Essai d'amortissement du pendule,1998-03-12,2,['87.040'],ISO/TC 35/SC 9,9599,[6116],[39404],"['en','fr']",9,

31038,IS,Cor,ISO 1522:1998/Cor 1:1998,Paints and varnishes — Pendulum damping test — Technical Corrigendum 1,Peintures et vernis — Essai d'amortissement du pendule — Rectificatif technique 1,1998-11-26,2,['87.040'],ISO/TC 35/SC 9,9599,,[39404],"['en','fr']",3,

39404,IS,,ISO 1522:2006,Paints and varnishes — Pendulum damping test,Peintures et vernis — Essai d'amortissement du pendule,2006-12-01,3,['87.040'],ISO/TC 35/SC 9,9599,"[31038,24923]",[83348],"['en','fr']",9,"<p>ISO 1522:2006 specifies two methods of carrying out a pendulum damping test on a coating of paint, varnish or other, related, product. It is applicable to single coatings and to multicoat systems.</p>"

55388,IS,,ISO 15222:2011,Truck and bus tyres — Method for measuring relative wet grip performance — Loaded new tyres,Pneumatiques pour camions et autobus — Méthode de mesure de l'adhérence relative sur revêtement mouillé — Pneumatiques neufs en charge,2011-08-11,1,['83.160.10'],ISO/TC 31,9599,,[79041],"['en','fr']",19,<p>ISO 15222:2011 specifies the method for measuring relative wet grip braking performance index to a reference under loaded conditions for new tyres for use on commercial vehicles on a wet-paved surface.</p><p>The methods developed in ISO 15222:2011 are meant to reduce the variability. The use of a reference tyre is necessary to limit the variability of the testing method proc

79041,IS,,ISO 15222:2021,Truck and bus tyres — Method for measuring relative wet grip performance — Loaded new tyres,Pneumatiques pour camions et autobus — Méthode de mesure de l'adhérence relative sur revêtement mouillé — Pneumatiques neufs en charge,2021-11-19,2,['83.160.10'],ISO/TC 31,9599,[55388],[87320],"['en','fr']",21,"<p>This document specifies the method for measuring relative wet grip braking performance index to a reference under loaded conditions for new tyres for use on commercial vehicles on a wet-paved surface.</p><p>The methods developed in this document are meant to reduce the variability. The use of a reference tyre is necessary to limit the variability of the testing metho

42342,IS,,ISO 15223-1:2007,"Medical devices — Symbols to be used with medical device labels, labelling and information to be supplied — Part 1: General requirements","Dispositifs médicaux — Symboles à utiliser avec les étiquettes, l'étiquetage et les informations à fournir relatifs aux dispositifs médicaux — Partie 1: Exigences générales",2007-04-04,1,"['11.040.01','01.080.20']",ISO/TC 210,9599,"[38062,32231,31349]",[50335],"['en','fr','ru']",14,<p>ISO 15223-1:2007 identifies requirements for the development and use of symbols that may be used to convey information on the safe and effective use of medical devices. It also lists symbols that satisfy the requirements of ISO 15223-1:2007.</p><p

45420,IS,Amd,ISO 15223-1:2007/Amd 1:2008,"Medical devices — Symbols to be used with medical device labels, labelling and information to be supplied — Part 1: General requirements — Amendment 1","Dispositifs médicaux — Symboles à utiliser avec les étiquettes, l'étiquetage et les informations à fournir relatifs aux dispositifs médicaux — Partie 1: Exigences générales — Amendement 1",2008-06-10,1,"['11.040.01','01.080.20']",ISO/TC 210,9599,,[50335],"['en','fr','ru']",2,

50335,IS,,ISO 15223-1:2012,"Medical devices — Symbols to be used with medical device labels, labelling and information to be supplied — Part 1: General requirements","Dispositifs médicaux — Symboles à utiliser avec les étiquettes, l'étiquetage et les informations à fournir relatifs aux dispositifs médicaux — Partie 1: Exigences générales",2012-06-25,2,"['11.040.01','01.080.20']",ISO/TC 210,9599,"[45420,42342]","[67941,69081]","['en','fr','ru']",23,"<p>ISO 15223-1:2012 identifies requirements for symbols used in medical device labelling that convey information on the safe and effective use of medical devices. It also lists symbols that satisfy the requirements of ISO 15223-1:2012.</p><p>ISO 1

69081,IS,,ISO 15223-1:2016,"Medical devices — Symbols to be used with medical device labels, labelling and information to be supplied — Part 1: General requirements","Dispositifs médicaux — Symboles à utiliser avec les étiquettes, l'étiquetage et les informations à fournir relatifs aux dispositifs médicaux — Partie 1: Exigences générales",2016-11-02,3,"['11.040.01','01.080.20']",ISO/TC 210,9599,[50335],[77326],"['en','fr']",25,"<p>ISO 15223-1:2016 identifies requirements for symbols used in medical device labelling that convey information on the safe and effective use of medical devices. It also lists symbols that satisfy the requirements of this document.</p><p>ISO 15223-1:2016 is applicabl

31349,IS,,ISO 15223:2000,"Medical devices — Symbols to be used with medical device labels, labelling and information to be supplied","Dispositifs médicaux — Symboles à utiliser avec les étiquettes, l'étiquetage et les informations à fournir relatifs aux dispositifs médicaux",2000-04-13,1,"['01.080.99','11.040.01']",ISO/TC 210,9599,[26496],"[40128,42342,42343]",['en'],8,

32231,IS,Amd,ISO 15223:2000/Amd 1:2002,"Medical devices — Symbols to be used with medical device labels, labelling and information to be supplied — Amendment 1","Dispositifs médicaux — Symboles à utiliser avec les étiquettes, l'étiquetage et les informations à fournir relatifs aux dispositifs médicaux — Amendement 1",2002-08-15,1,"['01.080.99','11.040.01']",ISO/TC 210,9599,,"[40128,42342,42343]",['en'],1,

38062,IS,Amd,ISO 15223:2000/Amd 2:2004,"Medical devices — Symbols to be used with medical device labels, labelling and information to be supplied — Amendment 2","Dispositifs médicaux — Symboles à utiliser avec les étiquettes, l'étiquetage et les informations à fournir relatifs aux dispositifs médicaux — Amendement 2",2004-01-28,1,"['01.080.99','11.040.01']",ISO/TC 210,9599,,"[40128,42342,42343]",['en'],1,

26495,IS,,ISO 15225:2000,Nomenclature — Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange,Nomenclature— Spécifications pour un système de nomenclature des dispositifs médicaux destiné à l'échange de données réglementaires,2000-09-07,1,"['35.240.80','11.040.01']",ISO/TC 210,9599,,[50728],"['en','fr']",19,

36257,IS,Amd,ISO 15225:2000/Amd 1:2004,Nomenclature — Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange — Amendment 1,Nomenclature— Spécifications pour un système de nomenclature des dispositifs médicaux destiné à l'échange de données réglementaires — Amendement 1,2004-01-13,1,"['35.240.80','11.040.01']",ISO/TC 210,9599,,[50728],"['en','fr']",2,

50728,IS,,ISO 15225:2010,Medical devices — Quality management — Medical device nomenclature data structure,Dispositifs médicaux — Management de la qualité — Structure des données de nomenclature des dispositifs médicaux,2010-04-19,2,"['35.240.80','11.040.01']",ISO/TC 210,9599,"[26495,36257]",[63016],"['en','fr']",20,"<p>ISO 15225:2010 provides rules and guidelines for a medical device nomenclature data structure, in order to facilitate cooperation and exchange of data used by regulatory bodies on an international level between interested parties, e.g. regulatory authorities, manufacturers, suppliers, health care providers and end users.</p><p>ISO 15225:2010 includes guidelines for a minimum

6117,IS,,ISO 1523:1983,"Paints, varnishes, petroleum and related products — Determination of flashpoint — Closed cup equilibrium method","Peintures, vernis, pétrole et produits assimilés — Détermination du point d'éclair — Méthode à l'équilibre en vase clos",1983-12-01,2,"['75.080','87.040']",ISO/TC 28,9599,,[26981],"['en','fr']",6,"<p>Specifies a method for determining the flashpoint of a coating material. binder, solvent, petroleum or a related product; makes allowance for deviations from standard atmospheric pressure. The method is suitable for use over the temperature range 5 to 110o C. In some countries, existing regulations may require the use of other methods over at least a part of t

30186,IS,,ISO 15230:2007,Mechanical vibration and shock — Coupling forces at the man—machine interface for hand-transmitted vibration,Vibrations et chocs mécaniques — Forces de couplage à l'interface homme-machine en cas de vibrations transmises par les mains,2007-07-10,1,['17.160'],ISO/TC 108/SC 4,9599,,[77516],"['en','fr']",25,"<p>ISO 15230:2007 describes the coupling parameters between the hands of a machine operator and a vibrating surface of the machine. The coupling between the hand and the vibrating surface can be described using different parameters and component parts of these parameters: force parameters, such as push, pull and grip; parameters such as pressure exerted on skin.</p>

39706,IS,,ISO 15236-1:2005,"Steel cord conveyor belts — Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use","Courroies transporteuses à câbles d'acier — Partie 1: Exigences de conception, de dimensions et mécaniques des courroies transporteuses à usage général",2005-10-06,1,['53.040.20'],ISO/TC 41/SC 3,9599,,[70276],"['en','fr']",16,<p>ISO 15236-1:2005 specifies the performance and constructional requirements applicable to conveyor belts having steel cords in the longitudinal direction as reinforcement. The requirements for construction given in Clause 6 apply to the design of single belts as well as the design of complete type series such as those cove

31483,IS,,ISO 15236-2:2004,Steel cord conveyor belts — Part 2: Preferred belt types,Courroies transporteuses à câbles d'acier — Partie 2: Types de courroies recommandées,2004-06-18,1,['53.040.20'],ISO/TC 41/SC 3,9599,,"[70492,65933]","['en','fr']",7,<p>ISO 15236-2:2004 specifies preferred types of conveyor belts with steel cords in the longitudinal direction as reinforcement. The belt-type series in ISO 15236-2:2004 are based on the general requirements for construction given in ISO 15236-1.</p>

41049,IS,,ISO 15236-3:2007,Steel cord conveyor belts — Part 3: Special safety requirements for belts for use in underground installations,Courroies transporteuses à câbles d'acier — Partie 3: Exigences de sécurité particulières aux courroies utilisées dans des installations souterraines,2007-06-26,1,['53.040.20'],ISO/TC 41/SC 3,9599,,[71644],"['en','fr']",15,<p>ISO 15236-3:2007 specifies the performance and constructional requirements applicable to conveyor belts for underground mining having steel cords in the longitudinal direction as reinforcement. The requirements for design and construction apply to the design of single belts as well as the design of complete type series such as those c

27013,IS,,ISO 15237:2003,Solid mineral fuels — Determination of total mercury content of coal,Combustibles minéraux solides — Dosage du mercure total dans le charbon,2003-11-21,1,['73.040'],ISO/TC 27/SC 5,9599,,[70207],['en'],6,<p>ISO 15237:2003 specifies a procedure for the determination of the total mercury content of coal.</p>

70207,IS,,ISO 15237:2016,Solid mineral fuels — Determination of total mercury content of coal,Combustibles minéraux solides — Dosage du mercure total dans le charbon,2016-11-18,2,['73.040'],ISO/TC 27/SC 5,9599,[27013],[86992],['en'],5,<p>ISO 15237:2016 specifies a procedure for the determination of the total mercury content of coal.</p>

27014,IS,,ISO 15238:2003,Solid mineral fuels — Determination of total cadmium content of coal,Combustibles minéraux solides — Dosage du cadmium total dans le charbon,2003-11-21,1,['73.040'],ISO/TC 27/SC 5,9599,,[70206],['en'],6,"<p>ISO 15238:2003 specifies a procedure for the determination of the total cadmium content of coal.</p><p>This procedure has not been validated with coals that spontaneously ignite. Prior to use with such sample types, users should validate the method.</p>"

70206,IS,,ISO 15238:2016,Solid mineral fuels — Determination of total cadmium content of coal,Combustibles minéraux solides — Dosage du cadmium total dans le charbon,2016-11-18,2,['73.040'],ISO/TC 27/SC 5,9599,[27014],[86993],['en'],5,"<p>ISO 15238:2016 specifies a procedure for the determination of the total cadmium content of coal.</p><p>This procedure has not been validated with coals that spontaneously ignite. Prior to use with such sample types, users should validate the method.</p>"

6118,IS,,ISO 1524:1983,Paints and varnishes — Determination of fineness of grind,Peintures et vernis — Détermination de la finesse de broyage,1983-05-01,2,['87.040'],ISO/TC 35/SC 9,9599,,[26990],"['en','fr']",8,

26990,IS,,ISO 1524:2000,"Paints, varnishes and printing inks — Determination of fineness of grind",Peintures et vernis — Détermination de la finesse de broyage,2000-08-03,3,['87.040'],ISO/TC 35/SC 9,9599,[6118],[56806],"['en','fr']",6,

56806,IS,,ISO 1524:2013,"Paints, varnishes and printing inks — Determination of fineness of grind","Peintures, vernis et encres d'imprimerie — Détermination de la finesse de broyage",2013-02-13,4,['87.040'],ISO/TC 35/SC 9,9599,[26990],[76040],"['en','fr']",5,"<p>ISO 1524:2013 specifies a method for determining the fineness of grind of paints, inks and related products by use of a suitable gauge, graduated in micrometres.</p><p>It is applicable to all types of liquid paints and related products, except products containing pigments in flake form (e.g. glass flakes, micaceous iron oxides, zinc flakes).</p>"

26510,IS,,ISO 15241:2001,Rolling bearings — Symbols for quantities,Roulements — Symboles relatifs aux grandeurs,2001-08-30,1,"['01.075','21.100.20']",ISO/TC 4,9599,,[60135],"['en','fr']",18,

26513,IS,,ISO 15242-1:2004,Rolling bearings — Measuring methods for vibration — Part 1: Fundamentals,Roulements — Méthodes de mesurage des vibrations — Partie 1: Principes fondamentaux,2004-05-07,1,['21.100.20'],ISO/TC 4/SC 4,9599,,[62929],"['en','fr']",14,<p>ISO 15242-1:2004 defines and specifies measuring methods for vibration of rotating rolling bearings under established test conditions together with calibration of related measuring systems.</p>

32446,IS,,ISO 15242-2:2004,Rolling bearings — Measuring methods for vibration — Part 2: Radial ball bearings with cylindrical bore and outside surface,"Roulements — Méthodes de mesurage des vibrations — Partie 2: Roulements à billes radiaux, à alésage et surface extérieure cylindriques",2004-09-22,1,['21.100.20'],ISO/TC 4/SC 4,9599,,[62930],"['en','fr']",9,"<p>ISO 15242-2:2004 specifies vibration measuring methods for radial single-row and double-row ball bearings, with a contact angle up to and including 45 degrees, under established test conditions. It covers radial ball bearings with cylindrical bore and outside surface, except bearings with filling slots and three- and four-point contact

55711,IS,Cor,ISO 15242-2:2004/Cor 1:2010,Rolling bearings — Measuring methods for vibration — Part 2: Radial ball bearings with cylindrical bore and outside surface — Technical Corrigendum 1,"Roulements — Méthodes de mesurage des vibrations — Partie 2: Roulements à billes radiaux, à alésage et surface extérieure cylindriques — Rectificatif technique 1",2010-01-13,1,['21.100.20'],ISO/TC 4/SC 4,9599,,[62930],"['en','fr']",2,

32447,IS,,ISO 15242-3:2006,Rolling bearings — Measuring methods for vibration — Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface,"Roulements — Méthodes de mesurage des vibrations — Partie 3: Roulements à rotule sur rouleaux et à rouleaux coniques, à alésage et surface extérieure cylindriques",2006-01-18,1,['21.100.20'],ISO/TC 4,9599,,[69873],"['en','fr']",7,"<p>ISO 15242-3:2006 specifies vibration measuring methods for double-row radial spherical roller bearings and single-row and double row radial tapered roller bearings, with a contact angle up to and including 45 degrees, under established test conditions. It covers double-row radial spherical

55733,IS,Cor,ISO 15242-3:2006/Cor 1:2010,Rolling bearings — Measuring methods for vibration — Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface — Technical Corrigendum 1,"Roulements — Méthodes de mesurage des vibrations — Partie 3: Roulements à rotule sur rouleaux et à rouleaux coniques, à alésage et surface extérieure cylindriques — Rectificatif technique 1",2010-01-13,1,['21.100.20'],ISO/TC 4/SC 4,9599,,[69873],"['en','fr']",2,

32448,IS,,ISO 15242-4:2007,Rolling bearings — Measuring methods for vibration — Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface,"Roulements — Méthodes de mesurage des vibrations — Partie 4: Roulements radiaux à rouleaux cylindriques, à alésage et surface extérieure cylindriques",2007-10-25,1,['21.100.20'],ISO/TC 4,9599,,[69872],"['en','fr']",10,"<p>ISO 15242-4:2007 specifies vibration measuring methods for single-row and double-row radial cylindrical roller bearings, under established test conditions. </p><p>It covers single-row and double-row radial cylindrical roller bearings with cylindrical bore and outside surface.</p>"

27042,IS,,ISO 15243:2004,"Rolling bearings — Damage and failures — Terms, characteristics and causes","Roulements — Détérioration et défaillance — Termes, caractéristiques et causes",2004-02-11,1,['21.100.20'],ISO/TC 4,9599,,[59619],"['en','fr']",41,"<p>ISO 15243:2004 defines, describes and classifies the characteristics, changes in appearance and possible causes of failure of rolling bearings, occurring in service. It will assist in the understanding of the various forms of change in appearance and the failure that has occurred.</p><p>Consideration is restricted to characteristic forms of change in appearance and failure, which have a well-defined appearance and which can be attributed to p

27047,IS,,ISO 15245-1:2001,Gas cylinders — Parallel threads for connection of valves to gas cylinders — Part 1: Specification,Bouteilles à gaz — Filetages parallèles pour le raccordement des robinets sur les bouteilles à gaz — Partie 1: Spécifications,2001-10-18,1,['23.020.35'],ISO/TC 58/SC 2,9599,,"[59387,79727]","['en','fr']",8,

61324,IS,Amd,ISO 15245-1:2001/Amd 1:2013,Gas cylinders — Parallel threads for connection of valves to gas cylinders — Part 1: Specification — Amendment 1,Bouteilles à gaz — Filetages parallèles pour le raccordement des robinets sur les bouteilles à gaz — Partie 1: Spécifications — Amendement 1,2013-07-04,1,['23.020.35'],ISO/TC 58/SC 2,9599,,[79727],"['en','fr']",1,

27056,IS,,ISO 15247:1999,Zinc sulfide concentrates — Determination of silver content — Acid dissolution and flame atomic absorption spectrometric method,Concentrés sulfurés de zinc — Dosage de l'argent — Méthode par dissolution acide et spectrométrie d'absorption atomique dans la flamme,1999-04-29,1,['73.060.99'],ISO/TC 183,9599,,[63364],['en'],15,

26286,IS,,ISO 15253:2000,Ophthalmic optics and instruments — Optical devices for enhancing low vision,Optique et instruments ophtalmiques — Dispositifs optiques pour malvoyants,2000-09-21,1,['11.040.70'],ISO/TC 172/SC 7,9599,,"[79918,69043]","['en','fr']",21,

26287,IS,,ISO 15254:2002,Ophthalmic optics and instruments — Electro-optical devices for enhancing low vision,Optique et instruments ophtalmiques — Dispositifs électro-optiques pour malvoyants,2002-09-19,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[52493],"['en','fr']",7,<p>This International Standard applies to electro-optical devices specified by the manufacturer for use by visually impaired persons as low vision aids.</p><p>It specifies electro-optical and mechanical requirements and test methods. It does not cover optical devices for enhancing low vision which are specified in ISO 15253.</p>

52493,IS,,ISO 15254:2009,Ophthalmic optics and instruments — Electro-optical devices for enhancing low vision,Optique et instruments ophtalmiques — Dispositifs électro-optiques pour malvoyants,2009-06-24,2,['11.040.70'],ISO/TC 172/SC 7,9599,[26287],"[79918,69043]","['en','fr']",7,"<p>ISO 15254:2009 applies to electro-optical devices specified by the manufacturer for use by visually impaired persons, as low-vision aids.</p><p>It specifies electro-optical and mechanical requirements and test methods.</p>"

37481,IS,,ISO 15270:2006,Plastics — Guidelines for the recovery and recycling of plastics waste,Plastiques — Lignes directrices pour la valorisation et le recyclage des déchets plastiques,2006-09-14,1,"['83.080.01','13.030.50']",ISO/TC 61,9599,,[45089],['en'],14,"<p>ISO 15270:2006 provides guidance for the development of standards and specifications covering plastics recovery as well as other means of plastics waste reduction, including recycling. The standard establishes the different options for the recovery of plastics arising from pre-consumer and post-consumer sources. It also establishes the quality requirements that should be considered in all steps of the recovery process, and provid

37493,IS,,ISO 15296:2004,Gas welding equipment — Vocabulary — Terms used for gas welding equipment,Matériel de soudage aux gaz — Vocabulaire — Termes utilisés pour le matériel de soudage aux gaz,2004-10-12,1,"['01.040.25','25.160.30']",ISO/TC 44/SC 8,9599,,[66053],"['en','fr']",14,"<p>ISO 15296:2004 is a compilation of the terms, with their respective definitions, most frequently encountered in the various published EN or ISO standards or in the professional, technical or commercial literature.</p><p>ISO 15296:2004 is intended to improve the understanding over the major language boundaries of the terms commonly used in the gas welding equipment industry.</p><p>ISO 15296:2004 is intended to s

6119,IS,,ISO 1530:1973,Fishing nets — Description and designation of knotted netting,Filets de pêche — Description et désignation des nappes de filet nouées,1973-07-01,1,['65.150'],ISO/TC 38,9599,,[28359],"['en','fr']",3,<p>Describes the principal characteristics of cited product and comprises the items of information to be furnished when ordering the netting. It is intended to facilitate the exchange of information between purchasers and suppliers of this product. - Replaces ISO Recommendation R 1530-1970.</p>

23545,IS,,ISO 15302:1998,Animal and vegetable fats and oils — Determination of benzo[a]pyrene content — Reverse-phase high-performance liquid chromatography method,Corps gras d'origines animale et végétale — Détermination de la teneur en benzo[a]pyrène — Méthode par chromatographie liquide à haute performance à polarité de phase inversée,1998-06-18,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[40558],"['en','fr']",7,

40558,IS,,ISO 15302:2007,Animal and vegetable fats and oils — Determination of benzo[a]pyrene — Reverse-phase high performance liquid chromatography method,Corps gras d'origines animale et végétale — Détermination du benzo[a]pyrène — Méthode par chromatographie liquide à haute performance à polarité de phase inversée,2007-12-10,2,['67.200.10'],ISO/TC 34/SC 11,9599,[23545],[70991],"['en','fr','ru']",9,"<p>ISO 15302:2007 specifies a method for the determination of benzo[<i>a</i>]pyrene in crude or refined edible oils and fats by reverse-phase high performance liquid chromatography (HPLC) using fluorimetric detection in the range 0,1 µg/kg to 50 µg/kg.</p>"

35454,IS,,ISO 15304:2002,Animal and vegetable fats and oils — Determination of the content of trans fatty acid isomers of vegetable fats and oils — Gas chromatographic method,Corps gras d'origines animale et végétale — Détermination de la teneur en isomères trans d'acides gras de corps gras d'origine végétale — Méthode par chromatographie en phase gazeuse,2002-03-14,1,['67.200.10'],ISO/TC 34/SC 11,9599,,"[52294,52324,63503]","['en','fr']",20,"<p>This International Standard specifies a gas chromatographic method using capillary columns for the determination of the content of <i>trans</i> fatty acid isomers of vegetable oils and fats.</p><p>The method is specially designed to evaluate, by a si

37794,IS,Cor,ISO 15304:2002/Cor 1:2003,Animal and vegetable fats and oils — Determination of the content of trans fatty acid isomers of vegetable fats and oils — Gas chromatographic method — Technical Corrigendum 1,Corps gras d'origines animale et végétale — Détermination de la teneur en isomères trans d'acides gras de corps gras d'origine végétale — Méthode par chromatographie en phase gazeuse — Rectificatif technique 1,2003-05-20,1,['67.200.10'],ISO/TC 34/SC 11,9599,,"[52294,52324,63503]","['en','fr']",2,

26281,IS,,ISO 15312:2003,Rolling bearings — Thermal speed rating — Calculation and coefficients,Roulements — Vitesse de référence thermique — Calculs et facteurs de correction,2003-12-01,1,['21.100.20'],ISO/TC 4/SC 8,9599,,[69112],"['en','fr']",12,"<p>ISO 15312:2003 defines the thermal speed rating for oil bath lubricated rolling bearings and defines calculation principles for the determination of this parameter. The parameter determined in accordance with this International Standard applies to rolling bearings of the given series and sizes of standard design or of a design that, from a frictional point of view, can be related to a standard design bearing.</p><p>Thrust ball bearings are excl